26 Wide screen LCD TV With DVD Model No.: DVT-2621

Transcription

1 26 Wide screen LCD TV With DVD Model No.: DVT-2621 For information and support,

2

3 Contents Contents Caution Safety Information Unit and Accessories Product Feature Introduction 1. Front View 2. Rear View 3. Remote Control Connection Basic Operation OSD Menu 1. Video menu 2. Audio menu 3. Misc menu 4. TV menu 5. PC menu Multimedia DVD operation System operation Simple Troubleshooting

4 Caution Caution is intended to alert the user to the presence of un-insulated "dangerous to constitute a risk of electric shock to the persons. user to the presence of important operating and maintenance (servicing) Correct disposal of this Product electrical and electronic products. Please help us to conserve the environment we live in! directives. 1

5 Safety Information Safety Information Electrical safety -Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet apparatus. Physical safety ensure at least 5cm (2") clearance all around the unit. 2

6 Unit and Accessories Unit and Accessories and Product Feature TV set User's manual Remote control Mains Cable If any of the accessories are missing, then contact your dealer as soon as possible. Keep all the original packaging in case you need to return the set to the dealer. Product Feature - Inputs: RF, VIDEO, S-VIDEO, VGA, YPbPr, SCART, HDMI1, HDMI2, DVD - Audio Input: Audio R/L(YPbPr/VIDEO/SVIDEO), PC Audio - Support TV mode: PAL(B/G,D/K,I), SECAM(B/G,D/K) - Support NICAM and FM Stereo - Search TV: Auto/Manual - Auto-shutting down - Program exchange and edit - Speaker output: 2x8W - Power(AC V 50/60Hz) 3

7 Introduction Introduction 1. Front View TV/AV MENU CH+ CH- VOL+ VOL- POWER Led Indicator Remote Control window (Keep clear) 1. (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/standby)led Indicator: Press POWER to turn on and off. Indicator on(red) Indicator on(green) Standby mode Power on mode The effective receiving range for the signal is 5-8 metres from the front of the remote control window, and 30 0 to the left or right side and 20 0 above or below the remote control window. 2. The functions of the buttons are described as bellows: TV/AV: Press to display the input source menu. MENU: Press to display the OSD menu, press again to exit the menu. CH+/-: Press to scan through channels. VOL+/-: Press to adjust the volume. POWER: Turn on/standby the TV set. Press TV/AV button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or / button on remote control to select the input source, press ENTER button on the remote control to enter. Note: Before you select the input source, make sure the connections are prepared.

8 Introduction 2. Rear View SWITCH 12 AC POWER IN USB-UPDATE 1 2 COAX HDMI1/2/: Connect it to the HDMI of DVD or other equipment. 2. VGA: For PC display.connect it to the D-Sub 15 pins analog output connector of the PC. 3. PC AUDIO: Connect it to the audio output terminal of PC. 4. SCART1/2 Connect them to the composite terminal of DVD. 5. YPbPr: Connect them to the video output terminal of DVD.(used in YPbPr source) 6. VIDEO: Connect it to video output terminal of DVD. L/R in: Connect them to the audio output terminal of DVD(Shared with VIDEO/ S-VIDEO/ YPbPr). 7. S-VIDEO: Connect it to S-VIDEO output terminal of DVD. 8. RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal. 9. COAX: Output to Audio amplifier. 10. USB: Software update. 11. AC POWER IN: Connect to an earth V,50-60Hz AC outlet with the Power Cable. 12. SWITCH: Switch on or off the power suply. - To turn on the LCD TV Power on - Be sure to turn off the power and unplug both units from the wall outlet before making any connections. Power off 5

9 Introduction OPEN PLAY /PAUSE STOP POWER: Turn the TV on or turn it standby 2. MUTE: Silence status or cancel 3. TV/AV: Source select , -/--: Choose channel 6. DISPLAY: Display playing status 7. RETURN: Do to play the latest program 8. VOL+/-: Volume up/down 9. CH+/-: Channel up/down CH+/-, : Cursor buttons for OSD operation ENTER: Confirmation 10. SYS MENU: TV system menu 11. SYS-EXIT: Exit from the OSD menu 12. SOUND: Select the sound mode 13. PICTURE: Select the picture mode 14. TIMER: Time shutting down 12. NICAM/A2 Buttons for DVD operation 5. : Load/eject DVD disc : Play/pause DVD program : Stop DVD program 16. LANGUAGE: Select DVD disc language ZOOM: Adjust picture size in DVD mode SUBTITLE: Turn on/off the DVD subtitle display SEARCH: DVD search, Tracks or Chapters SETUP: DVD system setup MENU: DVD play list/disc menu ANGLE: Select DVD picture angle TITLE: DVD title : DVD fast reverse : DVD fast forward : DVD previous chapter : DVD next chapter PROGRAM: Edit the program and play SLOW: play DVD programs at slow speed REPEAT: Play the title or chapter once again A-B: Select and play the preferable paragraph of DVD program by pressing this key twice at the beginning and end of it. Buttons for TELETEXT 17. TV/TXT: Teletext on/off MIX: Display Teletext on top of the normal TV picture CANCEL: Turn off the Teletext display REVEAL: Reveal any hidden text, for example-quiz answer HOLD: Hold or carry on the current subpage SIZE: Press to see top half of page double size, Press again to see the bottom half of page double size Press again for normal size INDEX: Direct recall of page 100 SUBPAGE: Go to subpage COLOUR BUTTONS: Short cuts-follow the coloured links in the text 6

10 Connection Connection Power Cord Connection on. 5) lights red. POWER Antenna(RF) Connection Wall jack with F-Connector RF External Antenna Press TV/AV to select TV ENTER 7

11 Connection AV Input Connection DVD or VCR - Connect the VIDEO and AUDIO output jacks on the DVD or VCR to the AV IN jacks on the TV Video=yellow, Audio left=white, Audio right=red. AV in the input source menu. S-Video Connection compared to a regular VCR to the video input. - Connect the audio output jacks on the DVD or VCR to the audio input jacks on the set with an S-VIDEO in the input source menu. each other DVD or VCR 8

12 Connection SCART Connection DVD or VCR SCART in the input source menu. YPbPr Connection DVD or VCR input. Y=Green, Pb=Blue, Pr=red. - Connect the audio output jacks on the DVD or VCR to the audio input jacks on the set with an YPbPr in the input source menu. 9

13 Connection HDMI Connection Note: All cables shown are not included with the TV. DVD or VCR - Connect the HDMI jack on the DVD to the HDMI jack on the TV set with a HDMI cable. - Turn on the DVD, and select HDMI1/HDMI2/HDMI3 in the input source menu. A/V interface that supports uncompressed standard. One jack supports both video and audio information. PC Connection Note: All cables shown are not included with the TV. - If using a sound card, adjust the PC sound as required. - Set the video resolution of your PC to 1024x768,60Hz on its original monitor. Make the connections between the TV monitor and your PC, switch on the monitor before booting the PC. You can now set your preferred resolution from the choice supported. See the table of supported resolutions on the right. - Connect the RGB jack on the PC to the VGA jack on the TV set with a VGA cable. - Connect the audio output jack on the PC to the PC IN jack on the TV set with a stereo audio cable. - Turn on the PC, and select VGA in the input source menu. 10

14 Basic Operation Basic Operation Power on/off 1. Connect to the power with a power code, and turn on the switch(page 6). 2.-To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Main: Input Source select Press TV/AV button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or / button on remote control to select the input source, press ENTER button on the remote control to enter. Note: Before you select the input source, make sure the connections are prepared. TV AV DVD S-Video SCART YPbPr HDMI1 HDMI2 VGA Multimedia Basic buttons on the remote control POWER: Turn the TV on/standby. MUTE: Press to mute the sound, press again or press VOL+ to unmute. PMODE: Press repeatedly to cycle through the available video picture modes. SMODE: Press to cycle through the different sound settings. FREEZE: Catch the current picture. NICAM/A2: TV Nicam/A2 select. Number Buttons: Choose channel directly. Press number buttons and press ENTER button to play the channel. : Return to the previous channel viewed. DISPLAY: Display the information of the current mode. MENU: Press to display the OSD menu. EXIT: Press to exit the OSD menu. ASPECT: Press to change the screen display mode. Thumbstick( ): Allows you to navigate the on-screen menus and adjust the system settings to your preference. ENTER: CONFIRM button. SLEEP: Shutdown timer. TV/AV: Press to display the input source menu. VOL+/-: Press to adjust the volume. CH+/-: Press to scan through channels. FAV.list: Press to display the list of the favorite channels. FAV.add: Press to add or delete the current channel to the list of the favorite channels. 11

15 Basic OSD Menu operation Basic Operation Press MENU Main menu Video Audio Misc TV PC Video Audio Misc TV Picture Mode Contrast Brightness Color Temperature Vivid Middle Submenu (Video menu for example) PC DNR Middle On Back MENU Adjust /ENTER Hint--- Use select(fig.3) with Note1: Only when you input the suitable signal, the relevant items can be activated Note2: Please operating the OSD menu according to hint on the bottom of the banner. Video Audio Picture Mode Contrast Brightness User Video Audio Picture Mode Contrast Brightness User Misc TV Color Temperature 72 4 Middle Misc TV Color Temperature 72 4 Middle PC DNR Fig.1 Middle On PC DNR Fig.2 Middle On Video Audio Misc TV Picture Mode Contrast Brightness Color Temperature User Middle Video Audio Misc TV Blue Back Timer Parental Default English On PC DNR Fig.3 Middle On PC Fig.4 12

16 OSD Menu OSD Menu 1. Video menu Video Audio Misc TV PC Picture Mode Contrast Brightness Color Temperature DNR User Middle Middle On Back MENU Adjust /ENTER Description Picture Mode: PMODE control. Contrast: Adjust image contrast. Brightness: Saturation: Adjust image saturation. Sharpness: Adjust the sharpness. ColourTemperature: Note: You could not operate the Contrast, Brightness, Saturation, Sharpness and Color Temperature items when you select picture mode Vivid, Normal or soft. DNR: Adaptive Luma Control: Adjust the brightness automatically. 13

17 OSD Menu 2. Audio menu Video Audio Misc TV PC Volume Bass Balance AVC User Off On Back MENU Adjust /ENTER Description Sound Mode: SMODE control. Volume: Adjust vollume. Bass: Adjust the level of the lower-pitched sounds. Treble: Adjust the level of the higherpitched sounds. Balance: Surround: AVC: Equalizer: 3. Misc menu Video Audio Blue Back English On Misc TV PC Timer Parental Default Description(see next page) Back MENU Adjust /ENTER 14

18 OSD Menu Description OSD Language: Blue Back: Timer: Time On Time Off Time 001 0ff Off Time: On Time: Start Channel: Start Activate: Activate the on time setting. Off Time: Stop Activate: Activate the off time setting. Parental: 1 TV Change Password Hotel Mode Clear All Channel Lock: Video Lock: Change Password: Change the pssword. You have to enter the password to enter Hotel Mode: Password Hotel Mode Channel On Max Volume Off Off TV 1 Off 50 Hotel Mode: KeyPad Lock: Source On: program. Channel On: to program. Tuner Lock: Max Volume: Clear All: Reset all the Hotel Mode settings. Default: Reset all the Misc settings. 15

19 OSD Menu 4. TV menu Video Audio Program Edit Misc TV PC Back MENU Adjust /ENTER Auto Search: Note: When the TV is auto tunning, you could press MENU button to stop auto tunning and return to preview menu. 0 0% MENU Manual Scan:. 1 Back MENU Adjust /ENTER PR Start:. Start From:. Start Search:. 16

20 OSD Menu Program Edit:. Program Edit Channel Name On On On On On On On On Insert Delete Back MENU Adjust /ENTER Swap: RED press ENTER Insert: Insert a channel. Green ENTER Copy: YELLOW ENTER Delete: Delete a channel. BLUE 5. PC menu Video Audio Misc TV H Position 0 V Position 50 Clock 50 Phase 50 PC Back MENU Adjust /ENTER H/V Position Clock Phase Auto Setting 17

21 Multimedia Multimedia 2. Press TV/AV select Multimedia ENTER and press ENTER Main: TV AV HDMI1 HDMI2 HDMI3 Multimedia Files in the device ENTER 5. Press TV/AV Device External Hard Drive REP ANGLE SLOW SUB.T A-B GOTO STEP SELECT COPY PASTE DELETE Delete the selected program. 18

22 DVD Operation 19

23 DVD Operation 20

24 DVD Operation 21

25 DVD Operation 22

26 DVD System Operation 23

27 DVD System Operation 24

28 How to use the USB - Connector and Card Reader 25

29 Disc Care 26

30 Simple Troubleshooting Simple Troubleshooting failure. No power - Check all connections to the TV. No picture or sound - Ensure that the TV is plugged in and the power is on. - Ensure that the aerial is connected. Poor picture quality - Check the aerial connections. No colour - Adjust the colour setting. TV does not respond to remote control - Check that the remote control is within range of the unit. 27

31 LCD Panel Input Connector Power Source Power Consumption Panel Size Brightness Contrast Resolution Video Audio(L/R) S-VIDEO VGA PC Audio HDMI SCART YPbPr RF 26 inch(diagonal) 600 cd/m :1 1366x AC V 50/60Hz 160W improving the performance. 28