Agilent HSMx-C265 Surface Mount Chip LEDs Data Sheet

Size: px

Start display at page:

Download "Agilent HSMx-C265 Surface Mount Chip LEDs Data Sheet"

Josephine Booker
5 years ago
Views:

Agilent HSMx-C265 Surface Mount Chip LEDs Data Sheet Description The HSMx-C265 is a reverse mountable chip-type LED for lighting the non-component side of a PCB board.

1 Agilent HSMx-C265 Surface Mount Chip LEDs Data Sheet Description The HSMx-C265 is a reverse mountable chip-type LED for lighting the non-component side of a PCB board. In this reverse mounting configuration, this LED is designed to emit light through a small cut-out hole in the PC board. The HSMx-C265 is available in four colors. The small size, narrow footprint, and low profile make this series of LEDs excellent for backlighting, status indication, and front panel illumination application. Features Reverse mountable Undiffused optics Small 3.4 x 1.25 mm footprint Operating temperature range of 3 C to +85 C Compatible with IR solder reflow Four colors available: red, orange, yellow, and green Available in 8 mm tape on 7" (178 mm) diameter reels Applications Keypad backlighting Symbol backlighting LCD backlighting Status indication Front panel indicator Device Selection Guide Part Number Color Parts Per Reel HSMS-C265 High Efficiency Red 3 HSMD-C265 Orange 3 HSMY-C265 Yellow 3 HSMG-C265 Green 3 HSMH-C265 AlGaAs Red 3

2 Package Dimensions LED DIE 3.4 (.134) CATHODE MARK (ETCHED) [ANODE MARK FOR HSMH-C265] 1.25 (.49) 2.6 (.28) (GREEN SOLDER MASK) UNDIFFUSED EPOXY 1.2 (.47) POLARITY [3] 1.1 (.43) PC BOARD 1.1 (.43) CATHODE LINE.5 ±.15 (.2 ±.6).3 (.12).5 ±.15 (.2 ±.6) SOLDERING TERMINAL NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. TOLERANCE IS ±.1 mm (±.4 IN.) UNLESS OTHERWISE SPECIFIED. 3. POLARITY OF HSMH-C265 WILL BE THE OPPOSITE OF WHAT IS SHOWN ON ABOVE DRAWING. Absolute Maximum Ratings T A = 25 C Parameter HSMD/G/S/Y-C265 HSMH-C265 Units DC Forward Current [1] ma Peak Pulsing Current [2] 1 1 ma Power Dissipation mw Reverse Voltage (I R = 1 µa) 5 5 V LED Junction Temperature C Operating Temperature Range 3 to to +85 C Storage Temperature Range 4 to to +85 C Soldering Temperature See IR soldering profile (Figure 6) Notes: 1. Derate linearly as shown in Figure Pulse condition of 1/1 duty and.1 ms width. 2

3 Electrical Characteristics T A = 25 C Forward Voltage Reverse Breakdown Capacitance Thermal V F (Volts) V R (Volts) C (pf), VF =, I F = 2 I R = 1 µa f = 1 MHz Rθ J-PIN ( C/W) Part Number Typ. Max. Min. Typ. [1] Typ. HSMS-C HSMD-C HSMY-C HSMG-C HSMH-C Optical Characteristics T A = 25 C Luminous Intensity Peak Wavelength Dominant Wavelength Viewing Angle I v 2 ma [1] λ peak (nm) λ d (nm) [2] 2θ 1/2 Degrees [3] Part Number Color Min. Typ. Typ. Typ. Typ. HSMS-C265 HER HSMD-C265 Orange HSMY-C265 Yellow HSMG-C265 Green HSMH-C265 AlGaAs Notes: 1. The luminous intensity, I v, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, λ d, is derived from the CIE Chromatically Diagram and represents the perceived color of the device. 3. θ 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3

4 Color Bin Limits Green Color Bins [1] Dom. Wavelength (nm) Bin ID Min. Max. A B C D E Tolerance: ±.5 nm Yellow/Amber Color Bins [1] Dom. Wavelength (nm) Bin ID Min. Max. A B C D E F Tolerance: ±.5 nm Orange Color Bins [1] Dom. Wavelength (nm) Bin ID Min. Max. A B C D E F Tolerance: ±1 nm Light Intensity (Iv) Bin Limits [1] Intensity (mcd) Intensity (mcd) Bin ID Min. Max. Bin ID Min. Max. A N B P C Q D R E S F T G U H V J W K X L Y M Tolerance: ±15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representative for information on currently available bins. 4

5 1. GREEN RELATIVE INTENSITY.5 YELLOW ORANGE HER WAVELENGTH nm Figure 1. Relative intensity vs. wavelength. I F FORWARD CURRENT ma HER GREEN YELLOW ORANGE V F FORWARD VOLTAGE V LUMINOUS INTENSITY (NORMALIZED AT 2 ma) I F FORWARD CURRENT ma I F MAX. MAXIMUM FORWARD CURRENT ma Rθ J-A = 6 C/W Rθ J-A = 8 C/W T A AMBIENT TEMPERATURE C Figure 2. Forward current vs. forward voltage. Figure 3. Luminous intensity vs. forward current. Figure 4. Maximum forward current vs. ambient temperature. RELATIVE INTENSITY % ANGLE Figure 5. Relative intensity vs. angle. Note: 1. All dimensions in millimeters (inches). 5

6 1 SEC. MAX. 2.2 (.87) DIA. PCB HOLE TEMPERATURE C 23 C MAX. 4 C/SEC. MAX. 4 C/SEC. MAX. 3 C/SEC. MAX (.49) OVER 2 MIN. TIME 1.4 (.55) 2.3 (.91) 1.4 (.55) Figure 6. Recommended reflow soldering profile. Figure 7. Recommended soldering pad pattern. USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 8. Reeling orientation. 8. ± 1. (.315 ±.39) Ø 2.2 MIN. (Ø.795 MIN.) 1.5 ± 1. (.413 ±.39) Ø 13.1 ±.5 (Ø.516 ±.2) 3. ±.5 (.118 ±.2) ± 1. (7.24 ±.39) 59.6 ± 1. (2.346 ±.39) 4. ±.5 (.157 ±.2) 6 PS 5. ±.5 (.197 ±.2) Figure 9. Reel dimensions. Note: 1. All dimensions in millimeters (inches). 6

7 4. (.157) 1.5 (.59) CATHODE DIM. C (SEE TABLE 1).2 ±.5 (.8 ±.2) 1.75 (.69) DIM. A (SEE TABLE 1) 3.5 ±.5 (.138 ±.2) 8. ±.3 (.315 ±.12) DIM. B (SEE TABLE 1) 2. ±.5 (.79 ±.2) 4. (.157) PART NUMBER USER FEED DIRECTION TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) DIM. A ±.1 (.4) DIM. B ±.1 (.4) COVER TAPE DIM. C ±.1 (.4) HSMx-C265 SERIES 3.7 (.146) 1.45 (.57) 1.3 (.51) CARRIER TAPE Figure 1. Tape dimensions. END START Convective IR Reflow Soldering For more information on IR reflow soldering, refer to Application Note 16, Surface Mounting SMT LED Indicator Components. THERE SHALL BE A MINIMUM OF 16 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MOUNTED WITH COMPONENTS Figure 11. Tape leader and trailer dimensions. THERE SHALL BE A MINIMUM OF 16 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MINIMUM OF 23 mm (9.5 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE. Storage Condition: 5 to 3 6% RH max. Baking is required under the condition: a) the blue silica gel indicator becoming white/transparent color b) the pack has been open for more than 1 week Baking recommended condition: 6 ± 5 C for 2 hours. Notes: 1. All dimensions in millimeters (inches). 2. Tolerance is.1 mm (.4 in.) unless otherwise specified. 7

8 For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (8) or (48) Europe: +49 () China: Hong Kong: (+65) India, Australia, New Zealand: (+65) Japan: (+81 3) (Domestic/International), or (Domestic Only) Korea: (+65) Malaysia, Singapore: (+65) Taiwan: (+65) Data subject to change. Copyright 22 Agilent Technologies, Inc. Obsoletes EN April 18, EN

Agilent HSMx-C660 Right Angle Surface Mount Chip LEDs Data Sheet

Agilent HSMx-C660 Right Angle Surface Mount Chip LEDs Data Sheet Agilent HSMx-C66 Right Angle Surface Mount Chip LEDs Data Sheet Features Right Angle Mounting Compatible with IR Reflow Soldering Process Available in a Wide Variety of Colors Available in 8 mm Tape on