ANALOGUE DEMODULATOR OWNERS MANUAL

Transcription

1 ANALOGUE DEMODULATOR OWNERS MANUAL

2 TABLE OF CONTENTS Package Content About The ADM Front & Rear Panels.. 3 Illustration of Basic Connection... 4 Procedure of Set Up Remote Controller Description Operation Specification.. 13 Trouble Shooting.. 14 User Information...14 PACKAGE CONTENT Before the installation, please check the package of content. ANALOGUE DEMODULATOR main unit X 1 Plastic Stand X 1 Remote Control X 1 HD-15 VGA Cable X 1 3.5mm Stereo Audio Cable X 1 AC-DC Adaptor X 1 (Please check the AC Voltage) Main Unit Plastic Stand Remote Control VGA Cable Audio Cable AC/DC Adaptor 1

3 ABOUT THE ADM5 *For the best performance of this product, we strongly recommend you to read this operation manual thoroughly and keep this manual for future reference Preface: The imaging method of the CRT or LCD monitor is quite different from the traditional TV Set. CRT or LCD uses the non-interlace method to form a full screen. But the TV set uses interlacing method. So it is apparently that the LCD or CRT Monitor is better for long time viewing. And CRT or LCD has higher resolution than TV Set. Traditional TV Set has limited resolution (Horizontal Line), CRT or LCD can have more than twice or triple resolutions. The ADM5 is an excellent analogue demodulator that can let your CRT or LCD become a second TV set with higher picture quality and stable operation. Features: Plug n Play: no software required Stand-alone external TV tuner box for those TV's, HDTV's or video monitor without TV tuners built in. Great demodulator for converting coaxial cable TV signals into RCA video and stereo audio outputs for TV, video recorders, A/V receivers, wireless transmitter kit, etc. Analogue video to VGA converter. Convert video signals into progressive scan type for high definition video quality. 7 different resolutions: 800x600, 1024x768, 1280x1024, 1366x768, 1440x900, 1600x1200, 1920x1080, 1920x1200, 1680x1050, 2048x1152 Stylish Design - with stand that allows you to place the ADM5 upright or horizontal Full-function remote control 1 AV and S-Video connectors on the front panel for easy access Adjustable TV function: brightness, hue, colour etc. settings Auto-Scan function: never miss a channel Audio in and out VGA In and Out Application: With LCD monitor: your LCD will become a LCD TV With a CRT Monitor: you will have an Excellent TV Set You can play TV Game on your monitor or LCD You can make your monitor become a home entertainment centre You can make your monitor become a security monitor 2

4 FRONT & REAR PANELS Front Panels: Semi-transparent cover Power Input CH+/- Volume+/- Audio Input VIDEO Input S-VIDEO Input Rear Panels: CABLE IN F (or IEC) connector for ANTENNA or CATV signal input SPEAKER 3.5mm Stereo connector for connecting to Speaker VGA IN HD-15 VGA Female connector for connection to VGA Output Port of VGA Card of PC TO MONITOR HD-15 VGA Female connector for connection to CRT or LCD VIDEO OUT Video output (only for TV) AUDIO IN 3.5mm Stereo connector for connecting to output of PC Sound Card DC 5V Power input connector for AC/DC Adaptor supplied, Please note using different rated power supply will cause serious injury or fire. 3

5 ILLUSTRATION OF BASIC CONNECTION Front View DVD/VCD GAMECUBE TM HiFi-VCR PS2 TM Camcorder X-Box TM Back View Antenna or CATV Speaker Audio Cable Audio Cable Sound Card VGA Cable VGA Cable VGA Card Monitor or LCD Power Adaptor Back Panel of a PC *All brand names and trademarks stated or illustrated are related to their respect owners. 4

6 SET UP PROCEDURE (1.) Connection to LCD or CRT (In This section, after finishing the installation you will have a TV function only) a. Take the main unit, let it upright or horizontally placed beside your CRT or LCD b. Connect the Antenna or CATV cable to the CABLE IN of the back panel of your ADM5 c. Take the VGA Cable of CRT or LCD, connect the HD-15 VGA connector to TO MONITOR on the back panel of the ADM5. Fasten the screws. Please note: It is very important to fasten the screws. A loose connection will cause picture distortion. d. Take the connector of your Multimedia speaker (please note the connector should be 3.5mm male stereo type), connect to SPEAKER on the back panel of ADM5 e. Take out the AC/DC adaptor (included); please check the Voltage of your outlet of AC Power is the same rating with the adaptor. Hook the AC/DC Adaptor to the Outlet, connect the output of DC to DC 5V on the back panel of the ADM5 f. Turn on the power of your TV, then push the POWER button to TV Mode and check if there s any picture on your TV. If there is, then congratulations, you have finished the installation. b Rear d. Speaker c. CRT or LCD e. AC/DC Adaptor *All brand names and trademarks stated or illustrated are related to their respect owners. 5

7 (2) Connection to Computer (In this section, after finishing all the installation, you will have a TV function and you can also use your PC) a. Take the ADM5 main unit, let it upright or horizontal placed beside your CRT or LCD b. Connect the Antenna or CATV cable to the CABLE IN of the back panel of the ADM5 c. Take the VGA Cable of CRT or LCD, connecting the HD-15 VGA connector to TO MONITOR on the back panel of the ADM5. And take the VGA cable (supplied), connect one end to VGA IN on the ADM5, another end to VGA Card. Fasten the screws. Please note it is very important to fasten the screws. Loose connection will cause the distortion of Picture. d. Take the connector of your Multimedia speaker (please note the connector should be 3.5mm male stereotype), connect to SPAEKER on the back panel of ADM5. e. Take the supplied 3.5mm Audio cable, connect one end to Speaker out of Sound Card of Computer, another end to AUDIO IN of the ADM5 f. Take the AC/DC adaptor, please check the Voltage of your outlet of AC Power is the same rating with the adaptor. Hook the AC/DC Adaptor to the Outlet, connect the output of DC to DC 5V on the back panel of the ADM5 g. Turn on the Power of CRT or LCD, then push POWER button to TV Mode, if there are TV screen on your CRT or LCD. Congratulation! You have finished the installation Rear b. d. Sound Card c. f. e. VGA Card *All brand names and trademarks stated or illustrated are related to their respect owners. 6

8 (3) Connection to TV Game Console, V8 or another Video Appliances, Please follow the previous procedure first (If your Video Source is only RCA Output, please follow the steps) a. Connect the RCA connector to the output of your TV Game, DVD or VCR (Please note the connection cable should be colour coded, yellow for Video, White for Audio R, and Red for Audio L) b. Connect the other end of RCA to the Video/Audio Input on the front panel of the ADM5 ( Please note the connection cable should be colour coded, yellow for Video, White for Audio L, Red for Audio R) c. Turn on the Power of the ADM5 and your Video Appliance Select the POWER mode to TV mode. Change the Source to CVBS d. Push the PLAY key on your Video device, if you see the picture, your installation is completed. (If Your Video Source has S-Video, please follow the steps below) a. Connect the S connector and 2 Audio RCA Connectors to the output of your TV Game, DVD or VCR (please note the Audio connection cable should be colour coded, White for Audio R, Red for Audio L, S-Video Connector has special connector, please find the right orientation, never push too heavily otherwise the S-connector will be broken. ) b. Connect the S connector to the S on the ADM5 and 2 Audio RCA Connectors to AUDIO on the front panel of the ADM5 (please note the Audio connection cable should be colour coded, White for Audio L, Red for Audio R, S-Video Connector has special connector, please find the right orientation, never push too heavily otherwise the S-connector will be broken) c. Turn on the Power of the ADM5 and your Video Appliance. d. Select the POWER mode to TV mode. Change the Source to S-VIDEO e. Push the PLAY key on your appliance, If you see the picture your installation is completed. Camcorde X-Box TM GC TM DVD VCR PS2 TM All brand names and trademarks stated or illustrated are related to their respective owners. 7

9 REMOTE CONTROLLER DESCRIPTION Illustration of remote controller MUTE: Mute key for audio muting Power: TV/PC mode selection Numeric Key: 0~9 PIP: Start the PIP function, please be noticed this key only valid when the ADM5 is in the PC mode INPUT: selection of the signal sources CH+/-: channel up/down (only valid in TV/CATV mode) VOL+/-: change the volume MENU: Setting of TV function PICTURE: hot key for the setting(tv function) 1--: when the channel number up to 100, you need to press this key first RETURN: Last Channel Recall (only valid in TV/CATV mode) RES: Change the resolution of the ADM5 PREVIEW: 9 channel preview function 8

10 First time use (Watch TV on your monitor) There is no channel programmed inside this box, when you finished all the connections and power on the ADM5, at this time, it is under TV mode. Please use channel scan to scan all the channels available in your area. Step 1: press the MENU key Step 2: use arrow key CH+ CH- to select Search tab and press VOL+ to setting Step 3: use arrow key CH+ CH- to select Fast scan item Step 4: press arrow key VOL+- to activate quick scan, it will scan all the channels Step 5: when finish, you can watch the TV program now. If the Fast scan cannot get all the channels, please use NORMAL SCAN to acquire all the channels, but it will take a longer time. Watch DVD on your monitor Step 1: make the connection as per section - (3) Connection to TV Game Console, V8 or another Video Appliances Step 2: press input key on your remote controller to choose Composite Video or S-Video Step 3: enjoy your program ADVANCE SOFTWARE APPLICATION There are many features presented in the ADM5, in general, user seldom to use those functions. In some case, wrong setting will cause annoying viewing experience. Please be careful for the setting MENU OPERATION When you press the MENU key on your remote control there will be a POP-UP MENU (with 6 ICON) as Follow (Only valid under TV mode) All the operation are using CH+/CHkeys. VOL+ /VOL- keys are using for selecting sub-item and setting. MENU key for going to previous menu or exiting the menu. 1. Picture: Picture adjust 1.Picture 1.Bright 2.Seach 2.Contrast 3.Audio 3.Saturation 4.Setup 4.Hue 5.Time 5. Colour temp. Normal /warm /cold 6. Access 6.Picture mode Normal/user/bright/soft Description of sub item Bright: change the brightness of the ADM5 Contract: change the contrast of the ADM5 Saturation: change the colour saturation of the ADM5 9

11 Hue: change the colour tone of the ADM5 Colour Temperature: change the colour temperature of the ADM5 Picture mode: There are 4 selections, normal/user/bright/soft, to Change the picture mode. 2. Search: Auto scan 1. Picture 2. Search 1.Auto Scan Fast Scan 3. Audio Normal Scan 5. Time 2.Manual Scan Channel 1 6. Access. Band VHFL/VHFH/UHF Description of sub item 3.Audio Sys 4.CH Exchange1 1 5.CH Exchange2 1 6.Confirm Yes Auto Scan: There are 2 methods for scanning the TV Channel. Fast Scan: Scan the TV channel via Channel mapping. Equalize: change the balance of the audio output of the ADM5 10 Search Fine >>> Skip BG/DK/I OK ON/OFF Normal Scan: Scan the TV channel via Frequency step by step. It will take longer time for scanning all the channels Manual Scan: In order to get more channels, sometimes you need to scan the channel via MANUAL scan method. There are 5 items that you will need to do the scan. Channel: You can use VOL+/- to choose the desired channel Band: VHFL/VHFH/UHF 3 bands for your choice Search: do the search Fine: fine tune the frequency, add or decrease 0.1MHz /step Skip: skip the channel CH Exchange1, CH Exchange2: When you scan the channel, you can set the channel 2 as CH Exchange 1, Channel 7 is CH Exchange 2, then press confirm, than when you press CH2, the content is CH7, press CH2, the content is channel 7. Audio Sys: Select the audio system that matches your TV system. Confirm Yes: When press this key, Channel swapping will activate. 3. Audio: Audio Setup 1. Picture 2. Search 3.Audio 1.volume 4. Setup 2.equalize 5.Time 6.Access Description of sub item Volume: change the level of audio output

12 4. Setup: System settings 1. Picture 1.OSD setting Language English 2. Search Bright Normal/Bright/Gloom 3. Audio Mix Normal/Heavy/Light 4.Setup Background Gradual/Normal/Mix 5. Time 2.Display mode Signal source TV / AV /SV 6. Access. Colour system AUTO/PAL Description of main item 3.Advance setting 4.Blue background 5.Factory mode Monitor type 4:3 / 16:9 / 16:10 800*600 60/75Hz 1024*768 60/75Hz 1280* /75Hz 1600* Hz 1366*768 60Hz Display ratio 1920x Hz 2048x Hz 1440*900 60Hz 1680* Hz 1920*1200 Centre/Bottom R POP mode /Top R/Bottom L/Top L Browse mode 4 / 9/ 16 pic. 11 De-noise PEAKING BLE Screen Mode OSD setting: Change parameter setting of the OSD, there are 4 items for selection. Display mode: Change parameter of the display mode, there are 6 items for setting Advance setting: Setting of the picture parameter off/high/middle/low on/off ON/off Normal/4:3/16:9 BLUE Background: Activating screen to be blue when signal loss. There are 2 selections ON, OFF Factory mode: Reset the ADM5 back to Factory settings. Language: Choose the OSD language, English Only Bright: change the OSD brightness Mix: mixture of OSD and background Background: Change the background type of OSD block. Signal Source: Change the input source of the ADM5 now. There are 3 selections TV: CATV or Air TV AV: Composite Video SV: S- Video Colour System: Setting of the colour system. The default is AUTO. NOTE: wrong setting will cause serious distortion on image.

13 Monitor Type: Change the monitor aspect ratio, there are 3 selections, 4:3/16:9/16:10 Display ratio: Change the resolutions of the VGA output, there are 13 selections, 800*600 60/75Hz 1024*768 60/75Hz 1280* /75Hz 1600* Hz 1366*768 60Hz 1920x Hz 2048x Hz 1440*900 60Hz 1680* Hz 1920* Hz Please be noticed: You need to make sure the maximum resolution and frequency of you monitor can support. Wrong setting will cause no picture on your screen. POP-Mode: change the POP sub window position. There are 5 selections, Centre/Bottom R/Top R/Bottom L/Top L Browse Mode: Selection of the quick view windows number from 4, 9 to 16. De-noise: There are 4 selections, High, Middle, Low, and Off, you can choose the proper noise reduction level to meet your preferred image. Please note: if the level set to HIGH, there will be lagging of video on some action scenes. PEAKING: Change the sharpness of image. BLE: Change the output performance to enhance video on LCD monitor. Selection is ON/OFF Screen Mode: Change the output monitor type, there are 2 selections, Normal/4:3 5. Time: Time setting 1. Picture 1.Sys off 00:00 no use/always/once 2. Search 2.Sys on 00:00 no use/always/once 3. Audio 3.Remind 00:00 no use/always/once 4. Setup 4. Reserve 00:00 5. Time 5.Time 00:00 6. Access. These items are used for the automation of shutting down or waking up of your ADM5, you can do the adjustment to meet what you need. 6. Access: Some useful software functions 1. Picture 2. Search 3. Audio 4.Setup 5. Time calendar 6. Access. Software ID 12

14 SPECIFICATION Item CATV/TV Input Frequency range Video Input Audio Input (Signal Source) Audio Input (PC) VGA In Power- AC/DC adaptor VGA Output resolution Audio Output Video Output Regulatory specification: Complies with requirements of: Specification 75 Ohm F female or IEC female 48~862MHz Video, S-Video Stereo RCA Left, Right 3.5mm Stereo HD-15 Female 5 VDC 1A UL-listed for USA, CE certified for Europe HD-15 Female 800*600 60/75Hz 1024*768 60/75Hz 1280* /75Hz 1366*768 60Hz 1440*900 60Hz 1600* Hz 1680* Hz 1920x Hz 1920* Hz 2048x Hz 3.5 mm Stereo RCA jacket FCC FCC Part 15-Class B ICES-003 CE, RoHS *Specification subject to change without further notice 13

15 TROUBLE SHOOTING 1. No picture a. The connection could be not correct, please contrast the connection with illustration. b. Check the power plug whether it is firmly connected and the supplied voltage meets the adapter rating. c. Make sure that the selected mode is the same as input signal, and then perform AUTO SCAN again. (For example: under AIR TV mode, the F connector has to be connected with UHF/ VHF antenna. Under CATV mode, the F connector has to be connected to CATV system.) 2. No sound The connection could be not correct, please contrast the connection with illustration. 3. The ADM5 has no response while using remote controller a. Make sure that you are pointing to the IR sensor window of the ADM5 within 6 meters and +/- 15 degrees. b. Please check the batteries and replace with new ones if necessary. ***************************************************************************************************** The standard of VGA signal output from this unit is identical to general PC VGA display card, so the use of this unit will not violate the warranty of LCD or CRT monitor. ***************************************************************************************************** USER INFORMATION This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction may cause harmful interference to radio communication,. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected --Consult the dealer or an experienced radio/tv technician for help 14