QSFP+ 40GBASE-LR4 Fiber Transceiver

Size: px
Start display at page:

Download "QSFP+ 40GBASE-LR4 Fiber Transceiver"

Transcription

1 QSFP+ 40GBASE-LR4 Fiber Transceiver Preliminary Features RoHS-6 compliant Hot pluggable QSFP+ form factor 40Gbps aggregate rate 4x10Gb/s CWDM transmitter Compliant to industrial standard SFF-8436 QSFP+ standard Power consumption <3.5W Duplex LC receptacle. I2C standard management interface Description The QCP-10G3B4QDR is a 40Gbps, hot pluggable fiber transceivers for 40G Ethernet data transmission. The module support 40Gbps links over single mode fiber for 10km. The module consist 4x10Gbps CWDM LDs and multiplex 4 CWDM signals on a 40Gbps optical transmission, and de-multiplex 40G receiver signals to 4 CWDM signals. 4 receiving data lanes and each lane at data rate up to Gbps. QCP-10G3B4QDR is designed to meet the requirements of high speed, high density and low power consumption for applications in today s data center. Application 40G Ethernet Proprietary high speed, high density data transmission. Switch and router high speed backplane interconnect High performance computing, server and data storage. QCP-10G3B4QDR compliant with QSFP+ MSA and IEEE 802.3ba 40Gbase-LR4. 1 Revision: Draft

2 1. 1. Absolute Maximum Ratings Storage Temperature Ts ºC Storage Ambient Humidity HA 5 85 % Power Supply Voltage VCC V 2. Recommended Operating Conditions Operating Case Temperature TC ºC Ambient Humidity HA 5 85 % Non-condensing Power Supply Voltage VCC V Total Power dissipation 3.5 W Data rate for transmitter per lane ppm 100ppm Gbd Data rate for receiver per lane ppm 100ppm Gbd Transmission Distance 10 km 3. Specification of Transmitter Total Average Launched Power P O +8.3 dbm Note (1) Optical Extinction Ratio ER 3.5 db Lane Center Wavelength(Range) λ C Side Mode Suppression Ratio SMSR 30 db Transmitter OFF Output Power, each Lane P Off -30 dbm Tx OMA per Lane TxOMA dbm Average Launched Power,per Lane dbm Transmitter Reflectance -12 db Optical Return Loss Tolerance 20 db Relative Intensity Noise RIN 20 OMA -128 db/hz Output Eye Mask X1,X2,X3,Y1,Y2,Y3 Compliant with IEEE 802.3ba (0.25,0.4,0.45,0.25,0.28,0.4) Note (1). Total launch power consists 4 Channels operating at Gbps. Note (2). Transmitter eye mask definition nm Note (2) 2 Revision: Draft

3 4. Specification of Receiver λ C Lane Center Wavelength(Range) nm Average Receiver Power per Lane P IN dbm Note(1) Damage Threshold, per lane P th +3.3 dbm Receiver Power OMA, per Lane RxOMA 3.5 dbm Receiver Sensitivity OMA, per lane S dbm Stressed Receiver OMA, per lane SRS -9.6 dbm Return Loss -26 db Stressed Eye jitter, per lane 0.3 UI Note (1).The min. power is informative and not the principal indicator of signal strength. Note (2). Tested with PRBS , BER 1X10-12 Note(2) 3 Revision: Draft

4 5. Electrical Interface Characteristics Transmitter Total Supply Current I CC A ma Note (1) Differential line input Impedance R IN Ohm Differential Data Input Swing VDT mv p-p Note (2) Receiver Total Supply Current I CC B ma Note (1) Differential Data Output Swing VDR mv p-p Note (2) Low speed signal Input Control Voltage LPMode, Reset and modseil VIL V Input Control Voltage LPMode, Reset and modseil VIH 2 Vcc+0.3 V Output Voltage ModPrsL and IntL VOL V Output Voltage ModPrsL and IntL VOH 2 Vcc+0.3 V Note (1). A (TX)+ B (RX) = 1.1A (Not include termination circuit) Note (2). CML Interface, AC coupled to 100ohm differential Load. 4 Revision: Draft

5 6. Pin Description QSFP Module Pad Layout (Top View) Host PCB Layout (Top View) 5 Revision: Draft

6 Module Electrical Pin Function Definition Pin Logic Symbol Name/Description Note 1 GND Ground [1] 2 CML-I Tx2n Transmitter Inverted Data Input 3 CML-I Tx2p Transmitter Non-inverted Data Input 4 GND Ground [1] 5 CML-I Tx4n Transmitter Inverted Data Input 6 CML-I Tx4p Transmitter Non-inverted Data Input 7 GND Ground [1] 8 LVTTL-I ModSelL Module Select 9 LVTTL-I ResetL Module Reset 10 Vcc Rx +3.3V Power Supply Receiver 11 LVCMOS-I/O SCL 2-Wire Serial Interface Clock [2] 12 LVCMOS-I/O SDA 2-Wire Serial Interface Data [2] 13 GND Ground [1] 14 CML-O Rx3p Receiver Non-Inverted Data Output 15 CML-O Rx3n Receiver Inverted Data Output 16 GND Ground [1] 17 CML-O Rx1p Receiver Non-Inverted Data Output 18 CML-O Rx1n Receiver Inverted Data Output 19 GND Ground [1] 20 GND Ground [1] 21 CML-O Rx2n Receiver Inverted Data Output 22 CML-O Rx2p Receiver Non-Inverted Data Output 23 GND Ground [1] 24 CML-O Rx4n Receiver Inverted Data Output 25 CML-O Rx4p Receiver Non-Inverted Data Output 26 GND Ground [1] 27 LVTTL-O ModPrsL Module Present [2] 28 LVTTL-O IntL Interrupt [2] 29 Vcc Tx +3.3V Power Supply Transmitter 30 Vcc1 +3.3V Power Supply 31 LVTTL-I LPMode Low Power Mode 32 GND Ground [1] 33 CML-I Tx3p Transmitter Non-inverted Data Input 34 CML-I Tx3n Transmitter Inverted Data Input 35 GND Ground [1] 36 CML-I Tx1p Transmitter Non-inverted Data Input 37 CML-I Tx1n Transmitter Inverted Data Input 38 GND Ground [1] Notes: 1. Module ground pins GND are isolated from the module case and chassis ground within the module. 2. Shall be pulled up with 4.7K-10Kohms to a voltage between 3.15V and 3.45V on the host board. 3. Please refer to SFF-8436 Fig. 3a for more information on interface circuit and power filtering network. 6 Revision: Draft

7 7. Low Speed Electrical Hardware Pins In addition to 2-wire serial interface, QCP-10G3B4QDR module has the following low speed pins for control and status: ModPrsL, IntL, LPMode, ModSelL, ResetL 7.1 ModPrsL ModPrsL is an output pin. When low, indicates the module is present. The ModPrsL is asserted Low when inserted and deasserted High when the module is physically absent from the host connector. 7.2 IntL IntL is an output pin. When Low, it indicates a possible module operational fault or a status critical to the host system. The source of the interrupt could be identified by using the 2-wire serial interface. 7.3 LPMode LPMode is a control pin. When High, it could be used to set the module in low power mode (<1.5W). This pin, along with Power_overide bit and Power_set bit in management interface could be used to avoid system power crash. QCP-10G3A4BDR, however consumes less than 1.5W. Therefore this pin takes no effect. 7.4 ModSelL ModSelL is an input signal. When held low by the host, the module responds to two-wire serial communication commands. The ModSelL signal allows multiple QSFP modules to be on a single two-wire interface bus. When the ModSelL signal is High, the module will not respond to or acknowledge any two-wire interface communication from the host. The ModSelL signal input pin is biased to a High state in the module. In order to avoid conflicts, the host system must not attempt two-wire interface communications within the ModSelL deassert time after any QSFP modules are de-selected. Similarly, the host must wait for the period of the ModSelL assert time before communicating with the newly selected module. The assert and deassert periods of different modules may overlap as long as the above timing requirements are met. 7.5 ResetL The ResetL signal is pulled to Vcc in the QSFP+ module. A logic low level on the ResetL signal for longer than the minimum pulse length (t_reset_init) initiates a complete module reset, returning all user module settings to their default state. Module Reset Assert Time (t_init) starts on the rising edge after the low level on the ResetL pin is released. During the execution of a reset (t_init) the host will disregard all status bits until the module indicates a completion of the reset interrupt. The module indicates this by posting an IntL signal with the Data_Not_Ready bit negated. Note that on power-up (including hot insertion) the module will post this completion of reset interrupt without requiring a reset. 7 Revision: Draft

8 8. Outline Dimension 8 Revision: Draft

9 Appendix A. Document Revision Version No. Date Description Draft Preliminary datasheet 9 Revision: Draft

QSFP+ 40GBASE-SR4 Fiber Transceiver

QSFP+ 40GBASE-SR4 Fiber Transceiver QSFP+ 40GBASE-SR4 Fiber Transceiver Preliminary Features RoHS-6 compliant High speed / high density: support up to 4X10 Gb/s bi-directional operation Compliant to industrial standard SFF-8436 QSFP+ standard

More information

Parameter Symbol Min. Typ. Max. Unit. Supply Voltage Vcc V. Input Voltage Vin -0.3 Vcc+0.3 V. Storage Temperature Tst C

Parameter Symbol Min. Typ. Max. Unit. Supply Voltage Vcc V. Input Voltage Vin -0.3 Vcc+0.3 V. Storage Temperature Tst C QSFP-4X10G-LR-S-LEG CISCO 40GBASE-LR4 QSFP+ SMF 1310NM 10KM REACH MPO DOM PARALLEL QSFP-4X10G-LR-S-LEG 40Gbase QSFP+ Transceiver Features Four-Channel full-duplex transceiver modules Transmission data

More information

Part No. Data Rate Distance Interface Temp. DDMI MMF OM3 for 70m QSFP28.100G.SR Gbps

Part No. Data Rate Distance Interface Temp. DDMI MMF OM3 for 70m QSFP28.100G.SR Gbps QSFP28, 100G, SR4, 70m/100m, MPO Особенности: - Supports 10.1Gbps aggregate bit rates - Single.V Power Supply and Power dissipation

More information

40GBd QSFP+ SR4 Transceiver

40GBd QSFP+ SR4 Transceiver Preliminary DATA SHEET CFORTH-QSFP-40G-SR4 40GBd QSFP+ SR4 Transceiver CFORTH-QSFP-40G-SR4 Overview CFORTH-QSFP-40G-SR4 QSFP+ SR4 optical transceiver are base on Ethernet IEEE P802.3ba standard and SFF

More information

QSFP-100G-LR4-AR-LEG. 100Gbase-LR4 QSFP28 Transceiver

QSFP-100G-LR4-AR-LEG. 100Gbase-LR4 QSFP28 Transceiver Part# 39580 QSFP-100G-LR4-AR-LEG ARISTA NETWORKS COMPATIBLE100GBASE-LR4 QSFP28 SMF WDM 10KM REACH LC DOM QSFP-100G-LR4-AR-LEG 100Gbase-LR4 QSFP28 Transceiver Features Hot pluggable QSFP28 MSA form factor

More information

100G QSFP28 SR4 Transceiver

100G QSFP28 SR4 Transceiver Preliminary DATA SHEET CFORTH-QSFP28-100G-SR4 100G QSFP28 SR4 Transceiver CFORTH-QSFP28-100G-SR4 Overview CFORTH-QSFP28-100G-SR4 QSFP28 SR4 optical transceivers are based on Ethernet IEEE 802.3bm standard

More information

Features: Compliance: Applications: Warranty: QSFP-40G-LR4-GT 40GBASE-LR4 QSFP+ SMF Module Cisco Compatible

Features: Compliance: Applications: Warranty: QSFP-40G-LR4-GT 40GBASE-LR4 QSFP+ SMF Module Cisco Compatible The GigaTech Products is programmed to be fully compatible and functional with all intended CISCO switching devices. This QSFP+ optical transceiver is compliant with SFF-8436 and QSFP+ MSA standards. This

More information

SHQP28-100G-LR4-B. 103/112Gb/s QSFP28 Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DML/PIN, Single mode, 10km, 0~70 C

SHQP28-100G-LR4-B. 103/112Gb/s QSFP28 Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DML/PIN, Single mode, 10km, 0~70 C SHQP28-100G-LR4-B 103/112Gb/s QSFP28 Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DML/PIN, Single mode, 10km, 0~70 C SHQP28-100G-LR4-B Transceiver module is designed for 103Gigabit and 112Gigabit

More information

QSFP28 Series Preliminary. EOLQ-161HG-20-LA2 Series. Features. Applications. Ordering Information

QSFP28 Series Preliminary. EOLQ-161HG-20-LA2 Series. Features. Applications. Ordering Information EOLQ-161HG-20-LA2 Series Single-Mode 100GBASE-eLR4 QSFP28 Transceiver Single-Mode OTU4 4I1-9D1F QSFP28 Transceiver RoHS6 Compliant QSFP28 Series Preliminary Features Supports 103Gbps and 112Gbps Single

More information

SO-QSFP28-LR4. QSFP28, 100GBase, 1310nm, SM, DDM, 10km, LC OVERVIEW PRODUCT FEATURES APPLICATIONS ORDERING INFORMATION DATASHEET 4.

SO-QSFP28-LR4. QSFP28, 100GBase, 1310nm, SM, DDM, 10km, LC OVERVIEW PRODUCT FEATURES APPLICATIONS ORDERING INFORMATION DATASHEET 4. SO-QSFP28-LR4 QSFP28, 100GBase, 1310nm, SM, DDM, 10km, LC OVERVIEW The SO-QSFP28-LR4 is a 103/112 Gbps transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the

More information

Features: Compliance: Applications: Warranty: 49Y7928-GT QSFP+ 40G BASE-SR Transceiver IBM Compatible

Features: Compliance: Applications: Warranty: 49Y7928-GT QSFP+ 40G BASE-SR Transceiver IBM Compatible The GigaTech Products 49Y7928-GT is programmed to be fully compatible and functional with all intended LENOVO switching devices. This QSFP+ optical transceiver is a parallel fiber optical module with four

More information

EOLQ-851HG-02-MO Series Multi-Mode 100GBASE-SR4 QSFP28 Transceiver RoHS6 Compliant

EOLQ-851HG-02-MO Series Multi-Mode 100GBASE-SR4 QSFP28 Transceiver RoHS6 Compliant EOLQ-851HG-02-MO Series Multi-Mode 100GBASE-SR4 QSFP28 Transceiver RoHS6 Compliant QSFP28 Series Features Supports 103.1Gbps aggregate bit rates Single 3.3V Power Supply and Power dissipation < 3.5W Up

More information

Product Specification 56Gbps 60/100m QSFP+ Optical Transceiver Module FTL414QB2C APPLICATIONS

Product Specification 56Gbps 60/100m QSFP+ Optical Transceiver Module FTL414QB2C APPLICATIONS Product Specification 56Gbps 60/100m QSFP+ Optical Transceiver Module FTL414QB2C PRODUCT FEATURES Four-channel full-duplex transceiver module Hot Pluggable QSFP+ form factor Maximum link length of 60m

More information

Product Specification 40BASE-SR4 QSFP+ Gen3 Optical Transceiver Module FTL410QE3C

Product Specification 40BASE-SR4 QSFP+ Gen3 Optical Transceiver Module FTL410QE3C Product Specification 40BASE-SR4 QSFP+ Gen3 Optical Transceiver Module FTL410QE3C PRODUCT FEATURES Four-channel full-duplex transceiver module Hot Pluggable QSFP+ form factor Maximum link length of 100m

More information

Product Specification 40BASE-SR4 100m QSFP+ Gen2 Optical Transceiver Module FTL410QE2C

Product Specification 40BASE-SR4 100m QSFP+ Gen2 Optical Transceiver Module FTL410QE2C Product Specification 40BASE-SR4 100m QSFP+ Gen2 Optical Transceiver Module FTL410QE2C PRODUCT FEATURES Four-channel full-duplex transceiver module Hot Pluggable QSFP+ form factor Maximum link length of

More information

Product Specification 10km Multi-rate 100G QSFP28 Optical Transceiver Module FTLC1151SDPL

Product Specification 10km Multi-rate 100G QSFP28 Optical Transceiver Module FTLC1151SDPL Product Specification 10km Multi-rate 100G QSFP28 Optical Transceiver Module FTLC1151SDPL PRODUCT FEATURES Hot-pluggable QSFP28 form factor Supports 103.1Gb/s and 112Gb/s aggregate bit rates Power dissipation

More information

The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting postamplifier

The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting postamplifier Applications o 10GBASE-LR at 10.3125 Gbps o 10GBASE-LW at 9.953 Gbps o Other Optical Links Product Description XTBxxA-10LY 10 Gbps SFP+ Bi-Directional Transceiver, 10 km Reach 1270/1330 nm TX/1330/1270

More information

100Gb/s QSFP28 LR4 Optical Transceiver Pull-Tab Version. Product Specification. Preliminary

100Gb/s QSFP28 LR4 Optical Transceiver Pull-Tab Version. Product Specification. Preliminary 100Gb/s QSFP28 LR4 Optical Transceiver Pull-Tab Version Product Specification Preliminary Features Hot pluggable QSFP28 MSA form factor Compliant to IEEE 802.3ba 100GBASE-LR4 Up to 10km reach for G.652

More information

PRE-QSFP28-ER4L 100Gb/s QSFP28 ER4 Lite Optical Transceiver, 25-32km

PRE-QSFP28-ER4L 100Gb/s QSFP28 ER4 Lite Optical Transceiver, 25-32km Product Features: -Hot pluggable QSFP28 form factor -Compliant to Ethernet 100GBase-ER4 Lite -Supports 103.1Gb/s aggregate bit rate -Up to 25km reach for G.652 SMF without FEC -Up to 32km reach for G.652

More information

Product Specification XFP 10G LR 20km LC Optical Transceiver

Product Specification XFP 10G LR 20km LC Optical Transceiver Product Specification 1. Features Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km with SMF 1310nm Uncooled DFB laser XFP MSA package with duplex LC connector

More information

XFP-1020-WA/B 10Gbps XFP Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX

XFP-1020-WA/B 10Gbps XFP Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX Features XFP-1020-WA/B 10Gbps XFP Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX Supports 9.95Gb/s to 10.5Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 20km

More information

100Gb/s QSFP28 ER4 Lite Optical Transceiver DC-FC31C-40. Product Specification

100Gb/s QSFP28 ER4 Lite Optical Transceiver DC-FC31C-40. Product Specification 100Gb/s QSFP28 ER4 Lite Optical Transceiver DC-FC31C-40 Product Specification Features Hot pluggable QSFP28 MSA form factor Compliant to IEEE 802.3ba 100GBASE-ER4 Up to 25km reach for G.652 SMF without

More information

XFP Bi-Directional 10G 20Km 1270/1330nmTx / 1330/1270nmRx SLXFB-XXXX-20

XFP Bi-Directional 10G 20Km 1270/1330nmTx / 1330/1270nmRx SLXFB-XXXX-20 XFP Bi-Directional 10G 20Km 1270/1330nmTx / 1330/1270nmRx SLXFB-XXXX-20 Description Sourcelight SLXFB-XXXX-20 is compliant with the IEEE803.3ae 10Gbase-Bx. and transmission distance up to 20km on SMF.

More information

10G BiDi XFP 10km Optical Transceiver GBX-xxxx192-LRC

10G BiDi XFP 10km Optical Transceiver GBX-xxxx192-LRC 10G BiDi XFP 10km Optical Transceiver GBX-xxxx192-LRC Features Supports 9.95Gb/s to 10.3Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km with SMF 1270/1330nm DFB laser Transmitter

More information

FX-1310-F10 10Gbps XFP Optical Transceiver, 10km Reach

FX-1310-F10 10Gbps XFP Optical Transceiver, 10km Reach Features FX-1310-F10 10Gbps XFP Optical Transceiver, 10km Reach Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km with SMF 1310nm Uncooled DFB laser XFP MSA

More information

SNS-XFP-10GD-LR 10 Gbps Multi-Rate XFP Transceivers OC192/STM-64, 10GE or 10G FC 1310nm, Single-Mode 10Km, with Digital Diagnostics.

SNS-XFP-10GD-LR 10 Gbps Multi-Rate XFP Transceivers OC192/STM-64, 10GE or 10G FC 1310nm, Single-Mode 10Km, with Digital Diagnostics. SNS-XFP-10GD-LR 10 Gbps Multi-Rate XFP Transceivers OC192/STM-64, 10GE or 10G FC 1310nm, Single-Mode 10Km, with Digital Diagnostics. Highlights XFP MSA transceiver Multi-Rate: 9.95Gbps to 11.1Gb/s Protocols:

More information

T A S A 2 N B 1 F A H

T A S A 2 N B 1 F A H Specification Small Form Factor Pluggable Duplex LC Receptacle SFP+ Optical Transceivers 10 Gigabit Ethernet 10GBASE-LR Ordering Information T A S A 2 N B 1 F A H Voltage / Temperature 1. 3.3V / -40 ~

More information

Product Specification 100m Multirate Parallel MMF 100/128G QSFP28 Optical Transceiver FTLC9551SEPM

Product Specification 100m Multirate Parallel MMF 100/128G QSFP28 Optical Transceiver FTLC9551SEPM Product Specification 100m Multirate Parallel MMF 100/128G QSFP28 Optical Transceiver FTLC9551SEPM PRODUCT FEATURES Hot-pluggable QSFP28 form factor Supports 103.1Gb/s to 112.2Gb/s aggregate bit rates

More information

SFP-10G-LR (10G BASE-LR SFP+) Datasheet

SFP-10G-LR (10G BASE-LR SFP+) Datasheet SFP-10G-LR (10G BASE-LR SFP+) Datasheet Features Supports rate from 1.25 Gb/ to 10.3 Gb/s bit rates Optical interface compliant to IEEE 802.3ae Electrical interface compliant to SFF-8431 1310nm DFB transmitter,

More information

10Gbps 10km Range SFP+ Optical Transceiver

10Gbps 10km Range SFP+ Optical Transceiver Page 1 of 9 Overview This 1310 nm Distributed Feedback (DFB) 10Gbps 10km Range SFP+ Optical Transceiver is designed to transmit and receive optical data over singlemode optical fiber with a link length

More information

EMPOWERFIBER 10Gbps 2km SFP+ Optical Transceiver EPP C

EMPOWERFIBER 10Gbps 2km SFP+ Optical Transceiver EPP C EMPOWERFIBER 10Gbps 2km SFP+ Optical Transceiver EPP-31192-02C Features Optical interface compliant to IEEE 802.3ae 10GBASE-LR Electrical interface compliant to SFF-8431 Hot Pluggable 1310nm FP transmitter,

More information

10G- XFP- LR- AO. 10Gbs XFP Transceiver

10G- XFP- LR- AO. 10Gbs XFP Transceiver 10G- XFP- LR- AO BROCADE 10GBASE- LR XFP SMF 1550NM 10KM REACH LC DOM www.addoncomputer.com 10G- XFP- LR- AO 10Gbs XFP Transceiver Features Duplex LC connector Support hot- pluggable Metal with lower EMI

More information

10G- XFP- SR- AO. 10Gbs XFP Transceiver

10G- XFP- SR- AO. 10Gbs XFP Transceiver 10G- XFP- SR- AO BROCADE 10GBASE- SR XFP MMF 850NM 300M REACH LC DOM www.addoncomputer.com 10G- XFP- SR- AO 10Gbs XFP Transceiver Features Duplex LC connector Support hot- pluggable Metal with lower EMI

More information

Ordering information. 40Gb/s QSFP+ ER4 Optical Transceiver Product Specification. Features

Ordering information. 40Gb/s QSFP+ ER4 Optical Transceiver Product Specification. Features QSP-SM31030D-GP 40Gb/s QSFP+ ER4 Optical Transceiver Product Specification Features Compliant with 40G Ethernet IEEE802.3ba and 40GBASE-ER4 Standard QSFP+ MSA compliant Compliant with QDR/DDR Infiniband

More information

100GE/OTU4 QSFP28 LR4/4WDM-20 DML 20km Optical Transceiver GQS-SPO111-L24C

100GE/OTU4 QSFP28 LR4/4WDM-20 DML 20km Optical Transceiver GQS-SPO111-L24C 100GE/OTU4 QSFP28 LR4/4WDM-20 DML 20km Optical Transceiver GQS-SPO111-L24C Features 4 channels full-duplex transceiver module Transmission data rate up to 27.95Gb/s per channel 4 DFB-based LAN-WDM Cooling

More information

10Gbps 10km Range 1310nm SFP+ Optical Transceiver

10Gbps 10km Range 1310nm SFP+ Optical Transceiver Page 1 of 9 Overview ARIA s 10Gbps 10km Range 1310nm SFP+ Optical Transceiver is designed to transmit and receive optical data over single mode optical fiber with a link length of up to 10km. The transceiver

More information

Specification. Small Form Factor Pluggable Transceiver (MSA) LC Receptacle SFP+ 12 Gigabit SDI TIM-A1CB1-F11

Specification. Small Form Factor Pluggable Transceiver (MSA) LC Receptacle SFP+ 12 Gigabit SDI TIM-A1CB1-F11 Specification Small Form Factor Pluggable Transceiver (MSA) LC Receptacle SFP+ 12 Gigabit SDI TIM-A1CB1-F11 Model Name Description Voltage Category Device type Interface LOS Temperature Distance Latch

More information

10Gb/s 40km DWDM XFP Optical Transceiver

10Gb/s 40km DWDM XFP Optical Transceiver 10Gb/s 40km DWDM XFP Optical Transceiver PRODUCT FEATURES Hot-pluggable XFP footprint Supports 9.95Gb/s to 11.3Gb/s bit rates Supports Lineside and XFI loopback RoHS-6 Compliant (lead-free) Power dissipation

More information

XFP 10G 850nm 300M SR SLXF-1085-SR

XFP 10G 850nm 300M SR SLXF-1085-SR XFP 10G 850nm 300M SR SLXF-1085-SR Overview Sourcelight SLXF-1085-SR is compliant with the 10G Small Form-Factor Pluggable (XFP) Multi-Source Agreement (MSA), supporting data-rate of 10.3125Gbps (10G-SR)

More information

XFP Optical Transceiver

XFP Optical Transceiver XFP Optical Transceiver Small Form-Factor Pluggable (XFP) Fibre Optic Transceivers are compact transceivers used to interface networking devices to fibre or copper networking cables in telecom and data

More information

Product Specification. RoHS-6 Compliant 10Gb/s 10km XFP Optical Transceiver FTLX1412M3BCL

Product Specification. RoHS-6 Compliant 10Gb/s 10km XFP Optical Transceiver FTLX1412M3BCL Product Specification RoHS-6 Compliant 10Gb/s 10km XFP Optical Transceiver FTLX1412M3BCL PRODUCT FEATURES Supports 9.95Gb/s to 11.3Gb/s bit rates Power dissipation

More information

Part Number Transmitter Output Power Receiver Sensitivity Reach Temp DDM RoHS. Logic Symbol Name/Description Note 1 - GND Module Ground 1

Part Number Transmitter Output Power Receiver Sensitivity Reach Temp DDM RoHS. Logic Symbol Name/Description Note 1 - GND Module Ground 1 Product Features Compliant with IEEE Std 802.3-2005 10Gb Ethernet 10GBase-BX XFP MSA Rev. 4.5 compliant Full digital diagnostic management interface XFP MSA package with Single LC receptacle optical Uncooled

More information

6ch LC duplex QSFP Receiver ROSA (4ch x 6Gbps) + μ-bosa (2.5Gbps) (2km) FVQ2-4R1B-SM2

6ch LC duplex QSFP Receiver ROSA (4ch x 6Gbps) + μ-bosa (2.5Gbps) (2km) FVQ2-4R1B-SM2 6ch LC duplex QSFP Receiver ROSA (4ch x 6Gbps) + μ-bosa (2.5Gbps) (2km) FVQ2-4R1B-SM2 Product Features Video-dedicated transceiver Hot-pluggable QSFP+ form factor One LR4 ROSA and μ-bosa inside package

More information

FTX-S1XG-S55L-040DI. XFP 10GBase-ER, 1550nm, single-mode, 40km

FTX-S1XG-S55L-040DI. XFP 10GBase-ER, 1550nm, single-mode, 40km FTX-S1XG-S55L-040D XFP 10GBase-ER, 1550nm, single-mode, 40km Description FTX-S1XG-S55L-040D series XFP transceiver can be used to setup a reliable, high speed serial data link over single-mode fiber. Maximum

More information

QSFP SV-QSFP-40G-PSR4

QSFP SV-QSFP-40G-PSR4 Features 4 independent full-duplex channels Up to 11.2Gb/s data rate per channel MTP/MPO optical connector QSFP+ MSA compliant Digital diagnostic capabilities Up to 100m transmission on OM3 multi-mode

More information

Product Specification 40BASE-SR4 QSFP+ Gen4 Optical Transceiver Module FTL410QE4C

Product Specification 40BASE-SR4 QSFP+ Gen4 Optical Transceiver Module FTL410QE4C Product Specification 40BASE-SR4 QSFP+ Gen4 Optical Transceiver Module FTL410QE4 PRODUT FEATURES Four-cannel full-duplex transceiver module Hot Pluggable QSFP+ form factor Maximum link lengt of 100m on

More information

XFP ZR Optical Transceiver, 80km Reach GX ZRC

XFP ZR Optical Transceiver, 80km Reach GX ZRC XFP ZR Optical Transceiver, 80km Reach GX-55192-ZRC Features XFP MSA Rev 4.5 Compliant Data rate from 9.95Gbps to 11.1Gbps No Reference Clock required Cooled 1550 nm EML and APD receiver link length up

More information

Datasheet. QSFP28 100GBASE-LR4 1310nm 10km Transceiver QSFP28-LR4-100G. Features. Application

Datasheet. QSFP28 100GBASE-LR4 1310nm 10km Transceiver QSFP28-LR4-100G. Features. Application QSFP28 100GBASE-LR4 1310nm 10km Transceiver QSFP28-LR4-100G Features Hot Pluggable QSFP28 form factor Supports 103.1Gb/s aggregate bit rate Maximum link length of 10km on Single Mode Fiber (SMF) Duplex

More information

40GBASE-PLR4L QSFP+ 1310nm 1.4km MTP/MPO Transceiver for SMF QSFP-PIR4-40G

40GBASE-PLR4L QSFP+ 1310nm 1.4km MTP/MPO Transceiver for SMF QSFP-PIR4-40G 40GBASE-PLR4L QSFP+ 1310nm 1.4km MTP/MPO Transceiver for SMF QSFP-PIR4-40G Features Hot-pluggable QSFP+ form factor Supports 4 independent streams of 10GBASE-LR Lite Power dissipation < 2.5W RoHS-6 compliant

More information

GIGALIGHT 300m XFP Optical Transceiver GX SRC

GIGALIGHT 300m XFP Optical Transceiver GX SRC GIGALIGHT 300m XFP Optical Transceiver GX-85192-SRC Features Supports 9.95Gbps to 11.3Gbps bit rates Maximum link length of 300m (50um,MMF,2000MHz.Km) 850nm VCSEL laser and PIN receiver XFP MSA Rev 4.5

More information

Product Specification. 10Gb/s, 10km XFP Optical Transceiver FTLX1413M3BCL

Product Specification. 10Gb/s, 10km XFP Optical Transceiver FTLX1413M3BCL Product Specification 10Gb/s, 10km XFP Optical Transceiver FTLX1413M3BCL PRODUCT FEATURES Supports 8.5Gb/s to 11.32Gb/s bit rates Power dissipation

More information

10Gbps SFP+ Optical Transceiver, 10km Reach

10Gbps SFP+ Optical Transceiver, 10km Reach 10Gbps SFP+ Optical Transceiver, 10km Reach Features Optical interface compliant to IEEE 802.3ae 10GBASE-LR Electrical interface compliant to SFF-8431 Hot Pluggable 1310nm DFB transmitter, PIN photo-detector

More information

OC-48/STM-16 Bi-directional SFP Transceiver (40km) RBT25SI2

OC-48/STM-16 Bi-directional SFP Transceiver (40km) RBT25SI2 RoHS Compliant OC-48/STM-16 Bi-directional SFP Transceiver (40km) RBT25SI2 Applications SONET OC-48 / SDH STM-16 Gigabit Ethernet 1X / 2X Fiber Channel Features Description RoHS compliant 2.5Gb/s, 40Km

More information

Power (dbm) λ (nm) LINK DISTANCE SDI Bit Rate Max. Link Distance (km) 3G-SDI 2.97Gbps 30 HD-SDI 1.485Gbps 30 SD-SDI 270Mbps 30

Power (dbm) λ (nm) LINK DISTANCE SDI Bit Rate Max. Link Distance (km) 3G-SDI 2.97Gbps 30 HD-SDI 1.485Gbps 30 SD-SDI 270Mbps 30 1310 nm / 3 Gb/s Medium Power SM Video SFP Transceiver (RoHS Compliant) **********************************************************************************************************************************************************************

More information

CWDM / 12 Gb/s Medium Power SM Video Digital Diagnostic SFP+ Transceiver

CWDM / 12 Gb/s Medium Power SM Video Digital Diagnostic SFP+ Transceiver SPS-2310VW-CXX0G CWDM / 12 Gb/s Medium Power SM Video Digital Diagnostic SFP+ Transceiver (RoHS Compliant) FEATURES SMPTE 2082, SMPTE 424M, SMPTE 292M, SMPTE 259M, and DVB-ASI Compatible Hot-Pluggable

More information

Product Specification 40BASE-SR4/10GBASE-SR 300m QSFP+ Gen4 Optical Transceiver Module FTL410QD4C

Product Specification 40BASE-SR4/10GBASE-SR 300m QSFP+ Gen4 Optical Transceiver Module FTL410QD4C Product Specification 40BASE-SR4/10GBASE-SR 300m QSFP+ Gen4 Optical Transceiver Module FTL410QD4 PRODUT FEATURES Four-cannel full-duplex transceiver module Hot Pluggable QSFP+ form factor Maximum link

More information

CWDM / 3 Gb/s Medium Power Optical SM Digital Diagnostic Transmitter/Receiver FVD2-1TR-SM30-XX

CWDM / 3 Gb/s Medium Power Optical SM Digital Diagnostic Transmitter/Receiver FVD2-1TR-SM30-XX CWDM / 3 Gb/s Medium Power Optical SM Digital Diagnostic Transmitter/Receiver Features FVD2-1TR-SM30-XX SMPTE 297-2006 Compatible Speed from 50kbps to 3Gbps Power Budget > 15 db Support Video Pathological

More information

10Gb/s SFP+ ER 1550nm Cooled EML with TEC, PIN Receiver 40km transmission distance

10Gb/s SFP+ ER 1550nm Cooled EML with TEC, PIN Receiver 40km transmission distance Feature 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-ER/EW Electrical interface compliant to SFF-8431 specifications for enhanced 8. and 10 Gigabit small form factor pluggable module SFP+

More information

PRE-QSFP-LR4L 100G QSFP 28 Dual Range Optical Transceiver, 10km. Product Features: General Product Description:

PRE-QSFP-LR4L 100G QSFP 28 Dual Range Optical Transceiver, 10km. Product Features: General Product Description: Product Features: -100 Gigabit Ethernet (100GbE) 100GBASE-LR4 & ITU-T G.959.1 4I1-9D1F Dual Rate Transceiver -103.125 & 111.810 Gbit/s Dual Rate Capability -Compliant to IEEE 802.3ba 100GBASE-LR4 [1] and

More information

10Gb/s XFP Optical Transceiver Module

10Gb/s XFP Optical Transceiver Module 10Gb/s XFP Optical Transceiver Module WDM/BIDI 1330/1270nm 20km Features 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-LR, single LC connector for bi-directional application, over20km SMF

More information

Tunable SFP+ DWDM 10G 80Km ZR SLSSD-10GE-ZR-T

Tunable SFP+ DWDM 10G 80Km ZR SLSSD-10GE-ZR-T Tunable SFP+ DWDM 10G 80Km ZR SLSSD-10GE-ZR-T Overview 50GHz Full C-band Tunable SFP+ transceivers are designed for use in 10Gb/s to 11.1Gb/s 50GHz DWDM links up to 80km of G.652 fiber. The SFP+ module

More information

1550 nm TX / 1310 nm RX / 3 Gb/s Medium Power 1-Fibre SM Video SFP Transceiver

1550 nm TX / 1310 nm RX / 3 Gb/s Medium Power 1-Fibre SM Video SFP Transceiver 1550 nm TX / 1310 nm RX / 3 Gb/s Medium Power 1-Fibre SM Video SFP Transceiver (RoHS Compliant) **********************************************************************************************************************************************************************

More information

Ver.0.3 Sept NTC2-HFER-3SOH. 100Gbps CFP2 Transceiver 1/7. 100Gb/s CFP2 Optical Transceiver Module. Feature. Application

Ver.0.3 Sept NTC2-HFER-3SOH. 100Gbps CFP2 Transceiver 1/7. 100Gb/s CFP2 Optical Transceiver Module. Feature. Application 100Gb/s CFP2 Optical Transceiver Module Feature - 25.78125Gbps 100GBASE ER4 Applications - ITU-T G.959.1 OTU-4(27.95249Gbps x 4) compliant - Transmission distance up to 40km - Built in SOA plus ROSA -

More information

1550 nm / 3 Gb/s Medium Power Single Optical SM Digital Diagnostic Transmitter FVD2-1TR-SM50

1550 nm / 3 Gb/s Medium Power Single Optical SM Digital Diagnostic Transmitter FVD2-1TR-SM50 1550 nm / 3 Gb/s Medium Power Single Optical SM Digital Diagnostic Transmitter FVD2-1TR-SM50 Features SMPTE 297-2006 Compatible Speed from 50 Mbps to 3Gbps with up to 50 km Single-mode Fiber Distance up

More information

10Gb/s SFP+ Optical Transceiver Module 10GBASE-LR/LW

10Gb/s SFP+ Optical Transceiver Module 10GBASE-LR/LW 10Gb/s SFP+ Optical Transceiver Module 10GBASE-LR/LW Features 10Gb/s serial optical interface compliant to 802.3ae 10GBASE LR Electrical interface compliant to SFF 8431 specifications for enhanced 8.5

More information

AddOn Computer s SFP transceivers are RoHS compliant and lead- free.

AddOn Computer s SFP transceivers are RoHS compliant and lead- free. SFP- SX INDUSTRY STANDARD 1000BASE- SX SFP MMF 850NM 550M REACH LC www.addoncomputer.com SFP- SX 1.25Gbps SFP Transceiver Features Up to 1.25Gb/s data links Duplex LC connector Hot- pluggable SFP footprint

More information

CWDM / 3 Gb/s Medium Power SM Video Digital Diagnostic SFP Transceiver

CWDM / 3 Gb/s Medium Power SM Video Digital Diagnostic SFP Transceiver CWDM / 3 Gb/s Medium Power SM Video Digital Diagnostic SFP Transceiver (RoHS Compliant) **********************************************************************************************************************************************************************

More information

Applications LX xDR 10Gb. Gb/s 10km XFP Optical Transceiver

Applications LX xDR 10Gb. Gb/s 10km XFP Optical Transceiver 0BProduct Features Compliant with TU-T G.691 STM-64-64. 1 Compliant to EEE Std 802.3-2005 Ethernet 10GBase-LR/LW XFP MSA Rev. 4.5 compliant Full digital diagnostic management interface XFP MSA package

More information

3G-SDI Video SFP CWDM nm 40km Optical Transceivers

3G-SDI Video SFP CWDM nm 40km Optical Transceivers Features 3G-SDI Video SFP CWDM 1270-1610nm 40km Optical Transceivers HD-SDI SFP Transceiver available SD-SDI SFP Transceiver available 3G-SDI SFP Transceiver available SMPTE 297-2006 Compatible. Metal

More information

CFPQD010C10D CFP Dual Fibre 1310nm* / 10km / 100GBASE-LR4 & OTN OTU4

CFPQD010C10D CFP Dual Fibre 1310nm* / 10km / 100GBASE-LR4 & OTN OTU4 DATASHEET - REV A CFPQD010C10D CFP Dual Fibre 1310nm* / 10km / 100GBASE-LR4 & OTN OTU4 *1310nm LAN-WDM 800GHz #01 Overview CFPQD010C10D is a high performance dual rate CFP transceiver module for 100 Gigabit

More information

40GBASE-CSR4 QSFP+ 850nm 400m MTP/MPO Transceiver for MMF QSFP-CSR4-40G

40GBASE-CSR4 QSFP+ 850nm 400m MTP/MPO Transceiver for MMF QSFP-CSR4-40G 40GBASE-CSR4 QSFP+ 850nm 400m MTP/MPO Transceiver for MMF QSFP-CSR4-40G Features Application 40GBASE-SR4 40G Ethernet Breakout to 10GBASE-SR Ethernet Proprietary interconnections Four-channel full-duplex

More information

Small Form-factor Pluggable (SFP) Optical Module Cartridges (Ethernet) For Densité Frames and Grass Valley/Telecast Standalone Fiber Products

Small Form-factor Pluggable (SFP) Optical Module Cartridges (Ethernet) For Densité Frames and Grass Valley/Telecast Standalone Fiber Products Datasheet Small Form-factor Pluggable (SFP) Module Cartridges (Ethernet) For Densité Frames and Grass Valley/Telecast Standalone Fiber Products The Small Form-factor Pluggable (SFP) optical module cartridges

More information

OC-48/STM-16 SFP Transceiver (SR) RSP25SS1

OC-48/STM-16 SFP Transceiver (SR) RSP25SS1 RoHS Compliant OC-48/STM-16 SFP Transceiver (SR) RSP25SS1 Applications SONET OC-48 / SDH STM-16 Gigabit Ethernet (1000Base-SX) 1X / 2X Fiber Channel CPRI Line Rate Option 2: 1.2288Gb/s CPRI Line Rate Option

More information

LambdaFLEX Tunable XFP Module

LambdaFLEX Tunable XFP Module LambdaFLEX Tunable XFP Module Features: The Oclaro LambdaFLEX TM Tunable XFP module is a high performance tunable pluggable transceiver for use in the C- band window covering 1528nm to 1566nm. The module

More information

100G CFP4 Optical Transceiver Module, LR4

100G CFP4 Optical Transceiver Module, LR4 100G CFP4 Optical Transceiver Module, LR4 Features Compliant with and OTU4 Support line rates of 103.125 Gbps or 111.81 Gbps Duplex LC optical receptacle Operating temperature range of up to 5 o C to 70

More information

GbE SFP CWDM Transceiver (120km) RCP12SVX

GbE SFP CWDM Transceiver (120km) RCP12SVX RoHS Compliant GbE SFP CWDM Transceiver (120km) RCP12SVX Applications Gigabit Ethernet 1x Fiber Channel Features Up to 1.25Gb/s, 120Km optical data link Eight wavelengths CWDM transceivers Uncooled CWDM

More information

CWDM GBIC. 1.25Gbps GBIC Optical Transceiver, 80km Reach

CWDM GBIC. 1.25Gbps GBIC Optical Transceiver, 80km Reach CWDM GBIC 1.25Gbps GBIC Optical Transceiver, 80km Reach Features Dual data-rate of 1.25Gbps/1.0625Gbps operation 18 CWDM DFB wavelengths laser and PIN photodetector for 80km transmission Duplex SC optical

More information

LambdaFLEX Zero Chirp Tunable XFP Module TL8800ZPCND

LambdaFLEX Zero Chirp Tunable XFP Module TL8800ZPCND LambdaFLEX Zero Chirp Tunable XFP Module TL8800ZPCND www.lumentum.com Data Sheet The Lumentum LambdaFLEX tunable XFP module is a high performance tunable pluggable transceiver for use in the C-band window

More information

SMF Ad Hoc report. Pete Anslow, Ciena, SMF Ad Hoc Chair. IEEE P802.3bm, Geneva, September 2012

SMF Ad Hoc report. Pete Anslow, Ciena, SMF Ad Hoc Chair. IEEE P802.3bm, Geneva, September 2012 SMF Ad Hoc report Pete Anslow, Ciena, SMF Ad Hoc Chair IEEE P802.3bm, Geneva, September 2012 1 Introduction The Next Generation 40 Gb/s and 100 Gb/s Optical Ethernet Study Group SMF Ad Hoc has: Held two

More information

FTS-R27G-S31L-002DI. Multirate SFP 125Mbps-2.67Gbps, 1310nm, single-mode, 2km

FTS-R27G-S31L-002DI. Multirate SFP 125Mbps-2.67Gbps, 1310nm, single-mode, 2km FTS-R21G-S31L-002D Multirate SFP 125Mbps-2.67Gbps, 1310nm, single-mode, 2km Description FTS-R27G-S31L-002D series SFP transceiver can be used to setup a reliable, high speed serial data link over single-mode

More information

FTS-M12G-S85L-55M. SFP 1000Base-SX, 850nm, multi-mode, 550m

FTS-M12G-S85L-55M. SFP 1000Base-SX, 850nm, multi-mode, 550m FTS-M12G-S85L-55M SFP 1000Base-SX, 850nm, multi-mode, 550m Description FTS-M12G-S85L-55M series SFP transceiver can be used to setup a reliable, high speed serial data link over multi-mode fiber. Maximum

More information

40G SWDM4 MSA Technical Specifications Optical Specifications

40G SWDM4 MSA Technical Specifications Optical Specifications 40G SWDM4 MSA Technical Specifications Specifications Participants Editor David Lewis, LUMENTUM The following companies were members of the SWDM MSA at the release of this specification: Company Commscope

More information

WS G Gbps GBIC Optical Transceiver, 80km Reach

WS G Gbps GBIC Optical Transceiver, 80km Reach WS G5487 1.25Gbps GBIC Optical Transceiver, 80km Reach Features Dual data-rate of 1.25Gbps/1.0625Gbps operation 1550nm DFB laser and PIN photodetector for 80km transmission Duplex SC optical interface

More information

1310nm Video SFP Optical Transceiver

1310nm Video SFP Optical Transceiver 0nm Video SFP Optical Transceiver TRPVGELRx000MG Pb Product Description The TRPVGELRx000MG is an optical transceiver module designed to transmit and receive electrical and optical serial digital signals

More information

Intel Ethernet SFP+ Optics

Intel Ethernet SFP+ Optics Product Brief Intel Ethernet SFP+ Optics Network Connectivity Intel Ethernet SFP+ Optics SR and LR Optics for the Intel Ethernet Server Adapter X520 Family Hot-pluggable SFP+ footprint Supports rate selectable

More information

Applications: Features: Description: 10G SFP+ Transceiver LR 10km (PLS-10G-LR) Hot Pluggable, Duplex LC, +3.3V 1310nm DFB-LD

Applications: Features: Description: 10G SFP+ Transceiver LR 10km (PLS-10G-LR) Hot Pluggable, Duplex LC, +3.3V 1310nm DFB-LD Up to 20 km on 9/125µm SMF Single +3.3V Power Supply Built-in digital diagnostic functions Commercial operating temperature range: 0 C to 70 C Features: Supports 9.95 to 10.5Gb/s bit rates Hot-Pluggable

More information

SPCxxB10100D SFP+ Dual Fiber CWDM CWDM / 10dB / 10 Gigabit Ethernet

SPCxxB10100D SFP+ Dual Fiber CWDM CWDM / 10dB / 10 Gigabit Ethernet SPCxxB10100D SFP+ Dual Fiber CWDM CWDM / 10dB / 10 Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This transceiver

More information

40GBASE-ER4 optical budget

40GBASE-ER4 optical budget 40GBASE-ER4 optical budget Pete Anslow, Ciena SMF Ad Hoc, 21 August 2012 1 Introduction The Next Generation 40 Gb/s and 100 Gb/s Optical Ethernet Study Group has an adopted objective: Define a 40 Gb/s

More information

FTS-S12G-B53Y-005. SFP 1000Base-LX, BiDi, 1550/1310nm, single-mode, 5km

FTS-S12G-B53Y-005. SFP 1000Base-LX, BiDi, 1550/1310nm, single-mode, 5km FTS-S12G-B53Y-005 SFP 1000Base-LX, BiDi, 1550/1310nm, single-mode, 5km Description FTS-S12G-B53Y-005 series SFP transceiver can be used to setup a reliable, high speed serial data link over single-mode

More information

LambdaFLEX Negative Chirp Tunable XFP Module TL8900NACND

LambdaFLEX Negative Chirp Tunable XFP Module TL8900NACND LambdaFLEX Negative Chirp Tunable XFP Module TL8900NACND www.lumentum.com Data Sheet The Lumentum LambdaFLEX tunable XFP module is a high performance tunable pluggable transceiver for use in the C-band

More information

100Gbps QSFP28 ER4 Lite Optical Transceiver Module OPCW-S30-13-CB datasheet

100Gbps QSFP28 ER4 Lite Optical Transceiver Module OPCW-S30-13-CB datasheet Features Hot pluggable QSFP28 MSA form factor Compliant to Ethernet 100GBASE-ER4 Lite Supports 103.1Gb/s aggregate bit rate Up to 30km reach for G.652 SMF without FEC Up to 40km reach for G.652 SMF with

More information

PRODUCT NUMBER: TMS-E1EH8-X61xx. Specification. 48Gbit/s Mini SAS HD. Active Optical Cable. Ordering Information

PRODUCT NUMBER: TMS-E1EH8-X61xx. Specification. 48Gbit/s Mini SAS HD. Active Optical Cable. Ordering Information Specification 48Gbit/s Mini SAS HD Active Optical Cable Ordering Information Model Name Voltage Category Device type Interface Temperature Distance TMS-E1EH8-X6101 1 m TMS-E1EH8-X6104 4 m TMS-E1EH8-X6105

More information

OP7K-D80-xx-CF Data sheet

OP7K-D80-xx-CF Data sheet Absolute Maximum Ratings Features Compliant with XFP MSA Wavelength selectable to C-band ITU-T grid wavelengths Suitable for use in 100GHz channel spacing DWDM systems No Reference Clock required Cold

More information

EOLP-BI1696-XAD & EOLP-BI1696-XDA Series

EOLP-BI1696-XAD & EOLP-BI1696-XDA Series EOLP-BI1696-XAD & EOLP-BI1696-XDA Series Tx: 1270nm/Rx: 1330nm BIDI SFP+ Transceiver for 10GbE Tx: 1330nm/Rx: 1270nm BIDI SFP+ Transceiver for 10GbE RoHS 6 Compliant Features Operating data rate up to

More information

SFCxxB16GExD SFP Dual Fibre CWDM ITU CWDM / 16dB / Gigabit Ethernet

SFCxxB16GExD SFP Dual Fibre CWDM ITU CWDM / 16dB / Gigabit Ethernet SFCxxB16GExD SFP Dual Fibre CWDM ITU CWDM / 16dB / Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This transceiver

More information

SFP+ BIDI Series Preliminary EOLP-BI1696-XAD & EOLP-BI1696-XDA Series

SFP+ BIDI Series Preliminary EOLP-BI1696-XAD & EOLP-BI1696-XDA Series EOLP-BI1696-XAD & EOLP-BI1696-XDA Series Tx: 1270nm/Rx: 1330nm BIDI SFP+ Transceiver for 10GbE Tx: 1330nm/Rx: 1270nm BIDI SFP+ Transceiver for 10GbE RoHS 6 Compliant Features Operating data rate up to

More information

OP6F-S04-13-xM Datasheet

OP6F-S04-13-xM Datasheet Features SFP Multi-Source Agreement compliance Compliant with 4.25G Fiber Channel 400-SM-LC-M standard Compliant with 2.125G Fiber Channel 200-SM-LC-M standard Compliant with 1.0625G Fiber Channel 100-SM-LC-M

More information

400G-FR4 Technical Specification

400G-FR4 Technical Specification 400G-FR4 Technical Specification 100G Lambda MSA Group Rev 1.0 January 9, 2018 Chair Mark Nowell, Cisco Systems Co-Chair - Jeffery J. Maki, Juniper Networks Marketing Chair - Rang-Chen (Ryan) Yu Editor

More information

SFCxxB24GExD SFP Dual Fibre CWDM CWDM / 24dB / Gigabit Ethernet

SFCxxB24GExD SFP Dual Fibre CWDM CWDM / 24dB / Gigabit Ethernet SFCxxB24GExD SFP Dual Fibre CWDM CWDM / 24dB / Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This transceiver

More information

o-microgigacn Data Sheet Revision Channel Optical Transceiver Module Part Number: Module: FPD-010R008-0E Patch Cord: FOC-CC****

o-microgigacn Data Sheet Revision Channel Optical Transceiver Module Part Number: Module: FPD-010R008-0E Patch Cord: FOC-CC**** o-microgigacn 4-Channel Optical Transceiver Module Part Number: Module: FPD-010R008-0E Patch Cord: FOC-CC**** Description Newly developed optical transceiver module, FUJITSU s o-microgigacn series supports

More information