TVS-2-TAIT VPU-15-TAIT

Size: px
Start display at page:

Download "TVS-2-TAIT VPU-15-TAIT"

Transcription

1 TVS-2-TAIT High Level Rolling Code Scrambler for the Tait Orca & TM-8000 Radios VPU-15-TAIT Voice Inversion Scrambler for the Tait Orca & TM-8000 Radios Manual Revision: Rev B Covers Software Revisions: TVS-2-TAIT: 4.93 & Higher VPU-15-TAIT: 4.93 & Higher This manual & product supports the following radios: Portables: Tait Orca 5010/5020/5040 Mobiles: TM

2 SPECIFICATIONS Operating Voltage Operating Current Operating Temperature Frequency Response Input Impedance Carrier Suppression Audio Output Impedance Security Specifications: TVS-2 Encryption Sequences Random Number Generator Sequence Length (est.) 5 VDC 8 ma C Hz >25 kω 65 db < Peak Voice <1K Ω +40 Trillion 64 bits 84 billion years Security Specifications: VPU-15 Inversion Frequencies 37 INSTALLATION OVERVIEW 1. Test the radio for functionality. 2. Program the radio per the Radio Programming Section of this manual. 3. Install the scrambler into the radio per the Hardware Installation Section of this manual. 4. Program the scrambler per the Product Programming Section of this manual. *** Midian is not responsible for any damage/loss resulting from the use of Midian s products. GENERAL INFORMATION TVS-2: The TVS-2 is a high-level rolling code scrambler that uses hopping type rolling code encryption for higher security rather than the sweeping code type. The scrambler is capable of features such as ANI, ENI, Deadbeat Disable, Spy, and more when using Midian s Kryptic Signaling format with the CAD-300/DDU-300/TRC-300. For more details, please see the TVS-2 Technical Reference Manual. VPU-15: The VPU-15 is an entry level voice inversion scrambler. The scrambler is capable of features such as ANI, ENI, Deadbeat Disable, Spy, and more when using Midian s Kryptic Signaling format with the CAD- 300/DDU-300/TRC-300. For more details, please see the VPU-15 Technical Reference Manual. 2

3 RADIO PROGRAMMING Tait Orca Portables: In the Specifications screen, set the Maximum Number of Encryption Codes to the desired number of codes (1-4 codes). This should correspond to the number of codes programmed into the scrambler. The 5010 can only be single code. In the Key Settings screen, set the Function 1, 2 or 3 key for mode select and code select. It is recommended to program the Short Press key to Encryption On/Off for mode select and the Long Press key to Encryption Code Select for code select. If only using 1 security code it is not necessary to program a key for code select. 3

4 Tait TM-8000 Mobiles: Set the Programmable I/O on the Digital tab as follows: 1. Set Pin IOP_GP101 to Output > PTT > Reflect PTT Status > Active Low. 2. Set Pin IOP_GP102 to Input > PTTOUT > External PTT 1 > Active Low. 3. Set Pin IOP_GP103 to Output > MODE > F1 Key Status > Active Low >Latching. Note: This can also be set to F2, F3 or F4. F2, F3 and F4 can also be set to momentary to allow for code selection in addition to mode. 4. Set Pin IOP_GP106 to Output > Busy Status > Active Low. Set the Programmable I/O on the Audio tab as shown in the diagram below. 4

5 1. Set one key (Key 1 Key 4) to Encryption. This will be the front panel key used to turn the scrambler on/off. If the button is programmed for latched (see above) the button can only be used for mode selection. Key 2-4 can be programmed for momentary. In this case the button can be used for mode selection and code selection. Pressing and releasing the key will change mode. Pressing and holding the key will change code. 5

6 HARDWARE INSTALLATION Be certain to follow standard anti-static procedures when handling any of Midian s products. Tait Orca Portables: Disassembling the Radio: Reference the Tait Orca Service Manual for instructions on disassembly of the radio. Use extreme care when disassembling the radio. Installing the Scrambler: Flex Installed: Make certain R5 and R6 are removed from the flex. The scrambler plugs onto the flex pads labeled TS1. Lift the latch on the scrambler and plug the scrambler into the flex. Make certain the flex is inserted evenly into the connector. Close the latch. Remove R5 & R6 Program Out Right Pad Program In Flex Not Installed: If the flex is not installed, please reference the Service Manual for Tait Encryption for installation of the flex. Make certain R5 and R6 are removed from the flex. The scrambler plugs onto the flex pads labeled TS1. Lift the latch on the scrambler and plug the scrambler into the flex. Make certain the flex is inserted evenly into the connector. Close the latch. Reassembling the Radio: 1. If programming the scrambler using the KL-3, proceed to the programming section. Reference the Tait Orca Service Manual for instructions on assembly of the radio. Use extreme care when assembling the radio. 6

7 Tait TM-8000 Series Mobiles: Tait Orca Portables: Disassembling the Radio: Reference the Tait Service Manual for instructions on disassembly of the radio. Use extreme care when disassembling the radio. Installing the Scrambler: The scrambler plugs into the TM-8000 using the encryption interface module (EIM) from Tait. The Tait part number for this is The should include the EIM, a gray ribbon cable, a white flex cable, and mounting screws for the scrambler and EIM. 1. Set the links on the Tait EIM as follows and remove resistor R-27 from the interface: Link Position 1 Open 2 Open 3 Open 4 Open 5 Open 6 Open Open Open 2. Plug the scrambler into the EIM using the white flex cable. See picture below: 3. Mount the scrambler onto the EIM as shown in the picture below: 7

8 4. Plug the gray ribbon cable from the SK102 connector on the main board to the SK102 connector on the EIM, as shown in the picture below: 5. Mount the EIM into the metal lid of the radio using the mounting screws (torx type), as shown in the picture below: Reassembling the Radio: Reference the Tait Service Manual for instructions on assembly of the radio. 8

9 PRODUCT PROGRAMMING Midian s TVS-2-TAIT and VPU-15-TAIT are programmed via Midian s KL-4 programming cable or using Tait s TOPA-EA-007G. Please reference the KL-4 manual for setup instructions of the KL-4 hardware. Go to our website midians.com and under downloads> software download the latest MPS software version. If using the supplied CD-ROM insert it into the PC s CD-ROM drive. In the browser that will pop-up, install the MPS programming software. Be certain that the Install KL-4 USB Driver box is checked during the installation process. Open Windows Control Panel and go to Device Manager. Open Ports (COM& LPT) to identify the port assignment issued by computer. Plug in the KL4 programmer to the USB port and the screen will flash and show the device location. From the product selection screen on the programming software, select the appropriate product from the list and click OK. Set the parameters of the TVS-2-TAIT / VPU-15-TAIT software to fit the application. If any clarifications on a feature are required, move the mouse cursor over the feature name until the question mark appears and right click, a definition of the feature will be shown. After the latest MPS has been installed default programming files for specific radio models can be found at: C:\Apps\Midian\MPS\MPS_vX_xx\Additional Default Files\ \TVS-2_VPU-15\Tait Set the parameters of the scrambler software to fit the application. If any clarifications on a feature are required, move the mouse cursor over the feature name until the question mark appears and right click, a definition of the feature will be shown. After entering the parameters, save the file by going to File - Save As. Enter the file name in the File Name block and click Save. Saving the file will allow for quick and easy reprogramming of units. Tait Orca Portable Programming: KL-4 Programming: After plugging the board into the radio, but with the radio still open, connect the black lead of the KL-4 to a common ground and the green clip lead to the Program In hole (P11). Turn power on to the radio and click Program Unit in the MPS software. KL-4 Reading: It will be necessary to connect the yellow clip lead to the Program Out pad (link 5 right pad), in addition to having the green clip lead connected to the Program In hole (P11). Follow the same procedure to read the unit as for programming, but select Read Unit in the menu bar. It is necessary to cycle power after programming or reading. Note: When the scrambler is read, the security codes will be read out as zeroes. If another scrambler is then cloned with this information, the scramblers will be incompatible because they have different security codes. TOPA-EA-007G Programming: This enables the scrambler to be programmed through the radio s accessory connector. Plug the TOPA-EA-007G cable into the KL-4 s RJ-11, P10 connector. Connect the TOPA-EA-007G to the accessory connector of the radio. Turn power on to the radio and click Program Unit in the MPS software. Note: The read function is not available when using the TOPA-EA-007G, as well as programming tones. 9

10 Tait TM-8000 Series Mobile Programming: KL-4 Programming: Connect the black lead of the KL-4 to a common ground and the green clip lead to pin 6 of the DB15 (HD). Turn power on to the radio and click Program Unit in the MPS software. The only indication that the TVS-2 was programmed successfully will be listening for the beeps from the TVS-2 in the radio speaker. The squelch circuit must be open to hear the beeps the TVS-2 generates. This can be accomplished two ways, press and hold the monitor/squelch override button or send a fully quieting signal with no modulation using a communication system analyzer. With the squelch open press program unit and after the program is sent you will hear several beeps in the speaker if programmed successfully. KL-4 Reading: It will be necessary to connect the yellow clip lead to pin 7 of the DB15 (HD), in addition to having the green clip lead connected to pin 6 of the DB15 (HD). Follow the same procedure to read the unit as for programming, but select Read Unit in the menu bar. It is necessary to cycle power after programming or reading. Note: When the scrambler is read, the security codes will be read out as zeroes. If another scrambler is then cloned with this information, the scramblers will be incompatible because they have different security codes X Programming: The scrambler may be programmed through the radio using the TM-8000 Encryption Direct Programming Cable ( X) available from Tait. Plug the cable into the DB-9 connector on the EIM. Turn power on to the radio and click Program Unit or Read Unit in the MPS software. Tait Orca Portables: Display Radios: OPERATION Mode Select: Press the Function Key (1, 2, or 3) that was assigned to this function (short or long press). When the scrambler is on SC will be indicated on the screen as well as the symbol. Code Select: Press the Function Key (1, 2, or 3) that was assigned to this function (short or long press). Then enter 1, 2, 3, or 4 on the keypad for the desired code followed by pressing the green Menu/Enter button. The display will show SC01 for instance when the scramble is on with code 1 selected. If the scrambler is off it would show 01. Non-Display Radios: Mode Select: Press the Function Key (1 or 2) that was assigned to this function (short or long press). The LED indicates Encryption On/Off status. Code Select: Code select is not available in this radio. Tait TM-8000 Mobiles: Mode Select: Press and release the key that was assigned to this function in the radio programming (F1, F2, F3 or F4). F1 is only available as a latched condition. F2, F3 and F4 can be momentary or latched. Code Select: Pressing and holding the mode select key will step the scrambler through the multiple keys if programmed. A number of beeps will be heard that correspond to the code (i.e. 2 beeps for code 2). Code select is only available when using F2, F3, or F4 as momentary. 10

11 TECHNICAL NOTES Radio Compatibility: Midian has taken the utmost care to ensure the option board integrates into the radio with minimal impact to the features of the radio. However, some features may not be available in the radio when an option board is used. If a feature is not available, please contact Midian to see if the feature can be added. Known Issues: Tones: Tones such as the Go-Ahead Beep, programming tones, etc. are not heard in the Orca radio. Multi-Code: If using multiple codes in the TVS-2-TAIT or VPU-15-TAIT and other Midian TVS-2 or VPU-15 Series scramblers are being used in other types of radios, it should be noted that in the TVS-2-TAIT and VPU-15-TAIT the binary is reversed. This means that code 4 in the TVS-2-TAIT or VPU-15-TAIT would equate to code 1 in a regular TVS-2 or VPU-15 scrambler. MIDIAN CONTACT INFORMATION Midian s sales and technical support departments are available by phone, fax and from 8 am to 5 pm (Arizona Standard Time) Monday through Friday (except holidays). Midian Electronics Inc N. Forbes Blvd. #101 Tucson, Arizona USA Orders: MIDIANS Phone: Fax: sales@midians.com Web: 11

12 - This page intentionally left blank -

13

14

TVS-2-VX. High Level Hopping Code Scrambler for Vertex Radios VPU-15-VX. Voice Inversion Scrambler with Kryptic Signaling for Vertex Radios

TVS-2-VX. High Level Hopping Code Scrambler for Vertex Radios VPU-15-VX. Voice Inversion Scrambler with Kryptic Signaling for Vertex Radios TVS--VX High Level Hopping Code Scrambler for Vertex Radios VPU--VX Voice Inversion Scrambler with Kryptic Signaling for Vertex Radios Manual Revision: 0--0 Covers Software Revisions: TVS--VX:.9 & Higher

More information

TVS-2-KW2 VPU-15-KW2

TVS-2-KW2 VPU-15-KW2 TVS--KW High Level Hopping Code Scrambler VPU--KW Voice Inversion Scrambler with Midian s Kryptic Signaling Manual Revision: 0-08- Covers Software Revisions: TVS-:.9 & Higher VPU-:.9 & Higher This manual

More information

Installation Manual VS-1200-KW1. Frequency Domain Scrambler with Multi-Format ANI VS-110- KW1. Rolling Double Inversion Scrambler VS KW1

Installation Manual VS-1200-KW1. Frequency Domain Scrambler with Multi-Format ANI VS-110- KW1. Rolling Double Inversion Scrambler VS KW1 Installation Manual VS-00-KW Frequency Domain Scrambler with Multi-Format ANI VS-0- KW Rolling Double Inversion Scrambler VS-00- KW Double Inversion Scrambler VS-000- KW Voice Inversion Scrambler VS-00-

More information

TVS-2 Series. Technical Reference Manual. Hopping Code Voice Scrambler. Manual Revision: Supports TVS-2 Firmware Versions: 4.

TVS-2 Series. Technical Reference Manual. Hopping Code Voice Scrambler. Manual Revision: Supports TVS-2 Firmware Versions: 4. TVS-2 Series Hopping Code Voice Scrambler Technical Reference Manual Manual Revision: 2009-08-28 Supports TVS-2 Firmware Versions: 4.93 & Higher Supports TVS-2 (MOT-PRO & COM) Firmware Versions: 2.95 &

More information

IRIG-B PTP Clock Converter Output Module Hardware Installation Manual

IRIG-B PTP Clock Converter Output Module Hardware Installation Manual IRIG-B PTP Clock Converter Output Module Hardware Installation Manual Kyland Technology Co., LTD. Publication Date: May 2012 Version: V1.2 Customer Service Hotline: (+8610) 88796676 FAX: (+8610) 88796678

More information

SXGA096 DESIGN REFERENCE BOARD

SXGA096 DESIGN REFERENCE BOARD SXGA096 DESIGN REFERENCE BOARD For Use with all emagin SXGA096 OLED Microdisplays USER S MANUAL VERSION 1.0 TABLE OF CONTENTS D01-501152-01 SXGA096 Design Reference Board User s Manual i 1. INTRODUCTION...

More information

Syntor X Flash Memory Module Revision C

Syntor X Flash Memory Module Revision C Syntor X Flash Memory Module Revision C The PIEXX SynXFlash memory module, along with the supplied PC software, replaces the original SyntorX code plugs and allows you to easily set modify and update your

More information

Transmitter Interface Program

Transmitter Interface Program Transmitter Interface Program Operational Manual Version 3.0.4 1 Overview The transmitter interface software allows you to adjust configuration settings of your Max solid state transmitters. The following

More information

Vorne Industries. 87/719 Analog Input Module User's Manual Industrial Drive Itasca, IL (630) Telefax (630)

Vorne Industries. 87/719 Analog Input Module User's Manual Industrial Drive Itasca, IL (630) Telefax (630) Vorne Industries 87/719 Analog Input Module User's Manual 1445 Industrial Drive Itasca, IL 60143-1849 (630) 875-3600 Telefax (630) 875-3609 . 3 Chapter 1 Introduction... 1.1 Accessing Wiring Connections

More information

DM1624, DM1612, DM812

DM1624, DM1612, DM812 Installation Guide Hardware and Software DM Series Digital Processors models DM1624, DM1612, DM812 LECTROSONICS, INC. 1 Installation Specific Information Only This guide covers only installation related

More information

Quick Guide Book of Sending and receiving card

Quick Guide Book of Sending and receiving card Quick Guide Book of Sending and receiving card ----take K10 card for example 1 Hardware connection diagram Here take one module (32x16 pixels), 1 piece of K10 card, HUB75 for example, please refer to the

More information

Re:source. Communication Module. SAT Version. Dominating Entertainment. Revox of Switzerland. E2.00

Re:source. Communication Module. SAT Version. Dominating Entertainment. Revox of Switzerland. E2.00 Re:source Communication Module SAT Version Dominating Entertainment. Revox of Switzerland. E2.00 Please note: Software update! Unlike the software for the Standard communication module, the SAT control

More information

Yellow Frog. Manual Version 1.1

Yellow Frog. Manual Version 1.1 Yellow Frog Manual Version 1.1 1 YellowFrog Contents PC Requirements...... 2 YellowFrog Power Meter Measurement.... 3 YellowFrog PC Software..... 3 Main Screen....... 4 Input Overload....... 5 Battery

More information

HD4112 Quad HDMI MPEG2 HD DVBT Encoder Modulator U S E R M A N U A L

HD4112 Quad HDMI MPEG2 HD DVBT Encoder Modulator U S E R M A N U A L HD4112 Quad HDMI MPEG2 HD DVBT Encoder Modulator U S E R M A N U A L HD4112 Manual Rev 1 Contents 1. GENERAL 1.1 Description 1.2 Specifications 2. INSTALLATION 2.1 What s in the Box 2.2 Connection 2.2.1

More information

Simple and highly effective technology to communicate your brand s distinctive character

Simple and highly effective technology to communicate your brand s distinctive character . . . Advantages 4 Simple and highly effective technology to communicate your brand s distinctive character COST EFFECTIVE No need to print graphics, you can change your message every day! No media player

More information

M1, M2GO and M2PC MIDI PCB Module Installation Guide SMPTE PCB Module Installation Guide

M1, M2GO and M2PC MIDI PCB Module Installation Guide SMPTE PCB Module Installation Guide M1, M2GO and M2PC MIDI PCB Module Installation Guide SMPTE PCB Module Installation Guide Author Part number Date Matthias Hinrichs/Chris Foblets 35000620-B 20.06.2012 This guide is also available for download

More information

Manual Version Ver 1.0

Manual Version Ver 1.0 The BG-3 & The BG-7 Multiple Test Pattern Generator with Field Programmable ID Option Manual Version Ver 1.0 BURST ELECTRONICS INC CORRALES, NM 87048 USA (505) 898-1455 VOICE (505) 890-8926 Tech Support

More information

DX-10 tm Digital Interface User s Guide

DX-10 tm Digital Interface User s Guide DX-10 tm Digital Interface User s Guide GPIO Communications Revision B Copyright Component Engineering, All Rights Reserved Table of Contents Foreword... 2 Introduction... 3 What s in the Box... 3 What

More information

FS1-X. Quick Start Guide. Overview. Frame Rate Conversion Option. Two Video Processors. Two Operating Modes

FS1-X. Quick Start Guide. Overview. Frame Rate Conversion Option. Two Video Processors. Two Operating Modes FS1-X Quick Start Guide Overview Matching up and synchronizing disparate video and audio formats is a critical part of any broadcast, mobile or post-production environment. Within its compact 1RU chassis,

More information

SINGLE ZONE CLIMATE ZONING SYSTEM. Technical Manual. Polyaire Pty Ltd

SINGLE ZONE CLIMATE ZONING SYSTEM. Technical Manual. Polyaire Pty Ltd SINGLE ZONE CLIMATE ZONING SYSTEM Technical Manual Polyaire Pty Ltd 11-13 White Road GEPPS CROSS South Australia, 5094 Tel: (08) 8349 8466 Fax: (08) 8349 8446 www.polyaire.com.au CONTENTS Features 1 Application

More information

GWL/ Power Group Technology Solutions Stay Powered for the Future

GWL/ Power Group Technology Solutions Stay Powered for the Future GWL/ Power Group Technology Solutions Stay Powered for the Future BMS2405 CONNECTION GUIDE: This is simple step-by-step manual how to CONNECT AND proceed basic SETUP of BMS2405. In following example connection

More information

EdgeConnect Module Quick Start Guide ITERIS INNOVATION FOR BETTER MOBILITY

EdgeConnect Module Quick Start Guide ITERIS INNOVATION FOR BETTER MOBILITY EdgeConnect Module Quick Start Guide ITERIS INNOVATION FOR BETTER MOBILITY 493456301 Rev B April 2009 Table of Contents Installation... 1 Setup... 2 Operation... 4 Live Video... 4 Video Settings... 5 Network

More information

Ten-Tec (865) Service Department:(865)

Ten-Tec (865) Service Department:(865) Ten-Tec (865) 453-7172 Service Department:(865) 428-0364 Installation Instructions for Ten-Tec Jupiter AT538K Tuner Kit The installation of the AT538K is divided into two steps. The first step is to reprogram

More information

LMH0340/LMH0341 SerDes EVK User Guide

LMH0340/LMH0341 SerDes EVK User Guide LMH0340/LMH0341 SerDes EVK User Guide July 1, 2008 Version 1.05 1 1... Overview 3 2... Evaluation Kit (SD3GXLEVK) Contents 3 3... Hardware Setup 4 3.1 ALP100 BOARD (MAIN BOARD) DESCRIPTION 5 3.2 SD340EVK

More information

Show Designer 3. Software Revision 1.15

Show Designer 3. Software Revision 1.15 Show Designer 3 Software Revision 1.15 OVERVIEW... 1 REAR PANEL CONNECTIONS... 1 TOP PANEL... 2 MENU AND SETUP FUNCTIONS... 3 CHOOSE FIXTURES... 3 PATCH FIXTURES... 3 PATCH CONVENTIONAL DIMMERS... 4 COPY

More information

AC335A. VGA-Video Ultimate Plus BLACK BOX Back Panel View. Remote Control. Side View MOUSE DC IN OVERLAY

AC335A. VGA-Video Ultimate Plus BLACK BOX Back Panel View. Remote Control. Side View MOUSE DC IN OVERLAY AC335A BLACK BOX 724-746-5500 VGA-Video Ultimate Plus Position OVERLAY MIX POWER FREEZE ZOOM NTSC/PAL SIZE GENLOCK POWER DC IN MOUSE MIC IN AUDIO OUT VGA IN/OUT (MAC) Remote Control Back Panel View RGB

More information

FCPM-6000RC. Mini-Circuits P.O. Box , Brooklyn, NY (718)

FCPM-6000RC. Mini-Circuits  P.O. Box , Brooklyn, NY (718) USB / Ethernet Integrated Frequency Counter & Power Meter 50Ω -30 dbm to +20 dbm, 1 MHz to 6000 MHz The Big Deal Automatically synchronized power & frequency measurements USB and Ethernet control Includes

More information

Media Tube HO ActionPad Configuration Manual V0.2 User Version

Media Tube HO ActionPad Configuration Manual V0.2 User Version Media Tube HO Media Tube HO ActionPad Configuration Manual V0.2 User Version Cover: Media Tube HO RGBW/RGB/White Direct View Media Tube HO RGBW/RGB/White Diffused CONTENT 1. INTRODUCTIOn 3 2. Connection

More information

Quick Operation Guide of LTN7700/7600 Series NVR

Quick Operation Guide of LTN7700/7600 Series NVR Quick Operation Guide of LTN7700/7600 Series NVR UD.6L0202B0042A02 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable

More information

AC334A. VGA-Video Ultimate BLACK BOX Remote Control. Back Panel View. Side View MOUSE DC IN BLACK BOX ZOOM/FREEZE POWER

AC334A. VGA-Video Ultimate BLACK BOX Remote Control. Back Panel View. Side View MOUSE DC IN BLACK BOX ZOOM/FREEZE POWER AC334A BLACK BOX 724-746-5500 VGA-Video Ultimate BLACK BOX 724-746-5500 Zoom Position PAL ZOOM/FREEZE POWER FREEZE ZOOM NTSC/PAL SIZE RESET POWER Size Power Remote Control DC IN MOUSE MIC IN AUDIO OUT

More information

1. Get support Attention Safety Caution Applications View Cameras on Screen (ex. HD TV or PC monitor) 3. Change Time Zone 5

1. Get support Attention Safety Caution Applications View Cameras on Screen (ex. HD TV or PC monitor) 3. Change Time Zone 5 1. Get support 1 2. Attention 1 3. Safety Caution 1 4. Applications 1 5. View Cameras on Screen (ex. HD TV or PC monitor) 3 Change Time Zone 5 6. Installation Guide for ONWOTE Cameras 6 7. View Cameras

More information

Agilent 11713A Attenuator/Switch Driver

Agilent 11713A Attenuator/Switch Driver Agilent A Attenuator/Switch Driver Configuration Guide This configuration guide will help you through the process of configuring a switching system utilizing Agilent s A attenuator/switch driver. The A

More information

BNC-Panel-16-TTL User Manual

BNC-Panel-16-TTL User Manual BNC-Panel-16-TTL User Manual Used to mate TTL signals on BNC Connectors to the Digital Lynx SX Mother Board, Digital Lynx Control Board, and DIO-24 Card. Neuralynx, Inc. 105 Commercial Drive, Bozeman,

More information

HD-CM HORIZON DIGITAL CABLE METER

HD-CM HORIZON DIGITAL CABLE METER HD-CM OFF! Max RF i/p = +17dBm 75Ω Max AC/DC i/p = 120Vrms MENU INPUT ON HORIZON DIGITAL CABLE METER Horizon Global Electronics Ltd. Unit 3, West Side Flex Meadow Harlow, Essex CM19 5SR Phone: +44(0) 1279

More information

FS3. Quick Start Guide. Overview. FS3 Control

FS3. Quick Start Guide. Overview. FS3 Control FS3 Quick Start Guide Overview The new FS3 combines AJA's industry-proven frame synchronization with high-quality 4K up-conversion technology to seamlessly integrate SD and HD signals into 4K workflows.

More information

Auxiliary states devices

Auxiliary states devices 22 Auxiliary states devices When sampling using multiple frame states, Signal can control external devices such as stimulators in addition to switching the 1401 outputs. This is achieved by using auxiliary

More information

STC 160 Head-End Station Quad modulators

STC 160 Head-End Station Quad modulators STC 160 Head-End Station Quad modulators HMS 480 HMM 480 / HMM 480 OIRT Notes on the Assembly Instructions. As well as this supplementary Assembly Instructions, the Assembly Instructions for the STC 160

More information

Element 78 MPE-200. by Summit Audio. Guide To Operations. for software version 1.23

Element 78 MPE-200. by Summit Audio. Guide To Operations. for software version 1.23 Element 78 MPE-200 by Summit Audio Guide To Operations for software version 1.23 TABLE OF CONTENTS IMPORTANT SAFETY AND GROUNDING INSTRUCTIONS COVER 1. UNPACKING AND CONNECTING...3 AUDIO CONNECTIONS...4

More information

0.56" 4 Digital Blue LED Panel Meter (rescalable) User s Guide

0.56 4 Digital Blue LED Panel Meter (rescalable) User s Guide 0.56" 4 Digital Blue LED Panel Meter (rescalable) User s Guide 2004-2009 Sure Electronics Inc. ME-SP037B_Ver1.0 0.56" 4 DIGITAL BLUE LED PANEL METER (RESCALABLE) USER S GUIDE Table of Contents Chapter

More information

Package Contents. LED Protocols Supported. Safety Information. Physical Dimensions

Package Contents. LED Protocols Supported. Safety Information. Physical Dimensions Pixel Triton Table of Contents Package Contents... 1 Safety Information... 1 LED Protocols Supported... 1 Physical Dimensions... 1 Software Features... 2 LED Status... 2 Power... 2 Activity LED... 2 Link

More information

TRIMBLE GPS / 10MHz REFERENCE MONITOR DISPLAY V January 2015

TRIMBLE GPS / 10MHz REFERENCE MONITOR DISPLAY V January 2015 TRIMBLE GPS / 10MHz REFERENCE MONITOR DISPLAY V1.2-1.4 January 2015 A display and command module for the Trimble Thunderbolt GPS with 10MHz reference oscillator. by Hubbatech Software Revision Notes: 1.2-2014

More information

Component Video Matrix Switcher Series ITEM NO.: YS04MA, YS04MD

Component Video Matrix Switcher Series ITEM NO.: YS04MA, YS04MD Component Video Matrix Switcher Series ITEM NO.: YS04MA, YS04MD Our component video switcher allows four different component video and stereo/digital audio sources to share two video displays. Manage multiple

More information

QUICK START GUIDE. QT Analog HD Camera & DVR Bundle ENGLISH

QUICK START GUIDE. QT Analog HD Camera & DVR Bundle ENGLISH QUICK START GUIDE QT Analog HD Camera & DVR Bundle ENGLISH Table of Contents Welcome What s Included...3 Understanding your DVR...4 Get Connected Registration...5 Connect Your Cameras...5 Connect DVR to

More information

EEG A1452 SCTE-104 Inserter Frame Card

EEG A1452 SCTE-104 Inserter Frame Card EEG A1452 SCTE-104 Inserter Frame Card Product Manual EEG Enterprises, Inc. 586 Main Street Farmingdale, New York 11735 TEL: (516) 293-7472 FAX: (516) 293-7417 Copyright EEG Enterprises, Inc. 2017 All

More information

KRS-V7A Programming Software for the Kenwood TM-V7A

KRS-V7A Programming Software for the Kenwood TM-V7A for the Kenwood TM-V7A Memory Types VHF Memories UHF Memories VHF Limit Memories UHF Limit Memories VFO Call Channel Memory Channel Functions Name Skip The KRS-V7A Programmer is designed to give you the

More information

EZ Encoder : Optical Incremental (P Series)

EZ Encoder : Optical Incremental (P Series) 1. Introduction Our EZ Encoders effectively eliminate multiple encoder part numbers by bringing intelligence and security to the design. A four-digit LED display with two push-buttons enables the user

More information

SAT IF distribution system

SAT IF distribution system 7. Technical specifications Type cs43 RF input frequency range pr. 50-350 MHz inputs number 4 level pr. 55...88 dbµv 60...93 dbµv symbol rate 3 45 Ms/s return loss/impedance > 0 db/75 Ω LNB powering/control

More information

HD168Bi Quad CVBS/HDMI HD DVBT Encoder Modulator U S E R M A N U A L

HD168Bi Quad CVBS/HDMI HD DVBT Encoder Modulator U S E R M A N U A L HD168Bi Quad CVBS/HDMI HD DVBT Encoder Modulator U S E R M A N U A L Contents 1. GENERAL 1.1 Description 1.2 Specifications 2. INSTALLATION 2.1 What s in the Box 2.2 Connection 2.2.1 DEVICE Programming

More information

Access Control Keypad for MK-DV, JB-DV

Access Control Keypad for MK-DV, JB-DV #91173 0406 Access Control Keypad for MK-DV, JB-DV - INSTRUCTIONS - The KVI is a surface mount electronic access control keypad for use with Aiphone s MK-DV or JB-DV video door station. Designed with the

More information

Trusted 40 Channel Analogue Input FTA

Trusted 40 Channel Analogue Input FTA PD-T8830 Trusted Trusted 40 Channel Analogue Input FTA Product Overview The Trusted 40 Channel Analogue Input Field Termination Assembly (FTA) T8830 is designed to act as the main interface between a field

More information

IC-F300/F400/S SERIES PRECAUTIONS

IC-F300/F400/S SERIES PRECAUTIONS SCRAMBLER UNIT INSTALLATION INSTRUCTIONS UT-109/UT-110 Rev.1.2 Thank you for purchasing the UT-109/UT-110 SCRAMBLER UNIT. The UT-109 and UT-110 are designed for Icom F series VHF/UHF FM transceivers. Please

More information

TeamWork Installation Guide

TeamWork Installation Guide C G G 00-0V/ A MAX TX RX +V APARATUS US 0 TeamWork Installation Guide TeamWork TeamWork is a fully customizable collaboration system comprised of an switcher, Show Me cables, a control processor, and a

More information

AI-1204Z-PCI. Features. 10MSPS, 12-bit Analog Input Board for PCI AI-1204Z-PCI 1. Ver.1.04

AI-1204Z-PCI. Features. 10MSPS, 12-bit Analog Input Board for PCI AI-1204Z-PCI 1. Ver.1.04 10MSPS, 12-bit Analog Board for PCI AI-1204Z-PCI * Specifications, color and design of the products are subject to change without notice. This product is a PCI bus-compliant interface board that expands

More information

AT450SAW Programmable Selective Amplifier

AT450SAW Programmable Selective Amplifier AT450SAW Programmable Selective Amplifier LEMELETTRONICA srl Via Grezze 38 25015 Desenzano del Garda (BS) ITALY Tel. +39 030-9120006 Fax +39 030-9123035 www.lemelettronica.it Technical Specifications

More information

QUICK START GUIDE QT ANALOG HD CAMERA & DVR BUNDLE ENGLISH

QUICK START GUIDE QT ANALOG HD CAMERA & DVR BUNDLE ENGLISH QUICK START GUIDE QT ANALOG HD CAMERA & DVR BUNDLE ENGLISH Table of Contents Welcome What s Included...3 Understanding your DVR...4 Get Connected Registration...5 Connect Your Cameras...5 Connect DVR to

More information

DVB-T USB SET-TOP BOX

DVB-T USB SET-TOP BOX DVB-T USB SET-TOP BOX User Manual Version: 1.0 (February 2005) TRANSYSTEM INC. No.1-2 Li-Hsin Rd.I Science-Based Industrial Park, Hsinchu, Taiwan Tel:+886-3-5780393 Fax:+886-3-5784111 e-mail: sales@transystem.com.tw

More information

Installation / Set-up of Autoread Camera System to DS1000/DS1200 Inserters

Installation / Set-up of Autoread Camera System to DS1000/DS1200 Inserters Installation / Set-up of Autoread Camera System to DS1000/DS1200 Inserters Written By: Colin Langridge Issue: Draft Date: 03 rd July 2008 1 Date: 29 th July 2008 2 Date: 20 th August 2008 3 Date: 02 nd

More information

P-2 Installing the monitor (continued) Carry out as necessary

P-2 Installing the monitor (continued) Carry out as necessary P-2 Installing the monitor (continued) Carry out as necessary Using the monitor without the bezel MDT552S satisfies the UL requirements as long as it is used with the bezel attached. When using the monitor

More information

Step What to do Expected result What to do if test fails Component tested 1 Visual inspection. Board is accurately assembled

Step What to do Expected result What to do if test fails Component tested 1 Visual inspection. Board is accurately assembled Fox Delta Amateur Radio Projects & Kits AAZ-0914A 50MHZ Antenna Analyzer Testing Guide by Tony / I2TZK SWR Analyzer 4 steps for a quick test Step What to do Expected result What to do if test fails Component

More information

FN:4181M5.DOC MC4181N SERIES MASTER CLOCKS MC4181N

FN:4181M5.DOC MC4181N SERIES MASTER CLOCKS MC4181N FN:4181M5.DOC MC4181N SERIES MASTER CLOCKS MC4181N TABLE OF CONTENTS 1.0 INTRODUCTION 2.0 SPECIFICATIONS 3.0 INSTALLATION 4.0 GETTING STARTED 4.1 The Auto-Prompt Display 4.2 The Cursor, Entering Data 4.3

More information

BMW12N-DYNAMIC KIT NTV-KIT717

BMW12N-DYNAMIC KIT NTV-KIT717 3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com BMW12N-DYNAMIC KIT NTV-KIT717 Screen Connector Overview The BMW12-N kit interfaces 2 video inputs

More information

RF Solution for LED Display Screen

RF Solution for LED Display Screen RF Solution for LED Display Screen Introduction RF is a kind of wireless telecommunication technology, now standard IEEE802.11B is much popular. Communication speed between server and terminal can reach

More information

L, LTC, LTM, LT are registered trademarks of Linear Technology Corporation. Other product

L, LTC, LTM, LT are registered trademarks of Linear Technology Corporation. Other product DESCRIPTION WARNING! Do not look directly at operating LED. This circuit produces light that can damage eyes. Demo Circuit 1265 QUICK START GUIDE LTC3220/LTC3220-1 360mA Universal 18-Channel LED Driver

More information

Quick Start for TrueRTA (v3.5) on Windows XP (and earlier)

Quick Start for TrueRTA (v3.5) on Windows XP (and earlier) Skip directly to the section that covers your version of Windows (XP and earlier, Vista or Windows 7) Quick Start for TrueRTA (v3.5) on Windows XP (and earlier) Here are step-by-step instructions to get

More information

innovative technology to keep you a step ahead Tailored to Simplify Installation and Troubleshooting of RF Signals

innovative technology to keep you a step ahead Tailored to Simplify Installation and Troubleshooting of RF Signals Tailored to Simplify Installation and Troubleshooting of RF Signals Intuitive Color Display with Simple Pass/ Fail Indicators Reduce Installer Entry Errors and Improves Decision Making Autotests Streamline

More information

Installation Instructions

Installation Instructions Bell Ringer OVERVIEW Thank you for choosing a TimeTrax Sync 5300 Bell Ringer. The TimeTrax Sync 5300 directs bells and horns (sold separately) to promote accountability, productivity and punctuality with

More information

Combo Board.

Combo Board. Combo Board www.matrixtsl.com EB083 Contents About This Document 2 General Information 3 Board Layout 4 Testing This Product 5 Circuit Diagram 6 Liquid Crystal Display 7 Sensors 9 Circuit Diagram 10 About

More information

FS4 Quick Start Guide

FS4 Quick Start Guide FS4 Quick Start Guide Overview FS4 is AJA s flagship frame synchronizer and converter, offering incredible versatility and connectivity in a sleek and compact 1RU frame for all your 4K/ UltraHD/2K/HD/SD

More information

User Manual rev: Made in Taiwan

User Manual rev: Made in Taiwan CV-500S HDMI to Component/CVBS & Audio Scaler Converter User Manual rev: 131218 Made in Taiwan The CV-500S HDMI to Component/CVBS & Audio Scaler Converter has been tested for conformance to safety regulations

More information

Troubleshooting. 1. Symptom: Status indicator (Red LED) on SSR is constant on. 2. Symptom: Output indicator (Yellow LED) on SSR is flashing.

Troubleshooting. 1. Symptom: Status indicator (Red LED) on SSR is constant on. 2. Symptom: Output indicator (Yellow LED) on SSR is flashing. Product Data Electrical Data SST (Transmitter) SSR (Receiver) Supply voltage 18 30 V dc Max. Voltage ripple 15 % (within supply range) Current consumption 100 ma (RMS) 75 ma Digital - 100 ma Max. outputs

More information

Single cable multiswich programmer PC102W

Single cable multiswich programmer PC102W Single cable multiswich programmer PC102W 1. Product description The PC102W - single cable multiswich programmer (in the text - programmer) is useful instrument while configuring and troubleshooting SAT

More information

VM15 Streamer V User s Guide

VM15 Streamer V User s Guide VM15 Streamer V3.33.6 User s Guide Endpoint Technology, LLC 26624 Ocean View Drive Malibu CA U.S. 90265 Technical Questions Contact: Jim Ketcham jsketcham@earthlink.net Index to VM- 15 Users Guide 1. Product

More information

Integration Note. Manufacturer: OVERVIEW AND SUPPORTED FEATURES

Integration Note. Manufacturer: OVERVIEW AND SUPPORTED FEATURES Manufacturer: Model Number(s): Minimum Core Module Version: Document Revision Date: Denon Integration Note AVR-2805, 3805, 1613, 1713, 1912CI, 1913, 2112CI, 2113CI, 2310CI, 2311CI, 2312CI, 2313CI, 2808CI,

More information

SignalTap Plus System Analyzer

SignalTap Plus System Analyzer SignalTap Plus System Analyzer June 2000, ver. 1 Data Sheet Features Simultaneous internal programmable logic device (PLD) and external (board-level) logic analysis 32-channel external logic analyzer 166

More information

DS-7200HVI/HFI-SH Series DVR Quick Operation Guide

DS-7200HVI/HFI-SH Series DVR Quick Operation Guide DS-7200HVI/HFI-SH Series DVR Quick Operation Guide UD.6L0202B0019A01 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is

More information

F24X DSK Setup and Tutorial

F24X DSK Setup and Tutorial F24X DSK Setup and Tutorial 1999 DSP Development Systems F24X DSK Setup and Tutorial 504706-0001 Rev. A July 1999 SPECTRUM DIGITAL, INC. 10853 Rockley Road Houston, TX. 77099 Tel: 281.561.6952 Fax: 281.561.6037

More information

USER GUIDE. DM Engineering Multi Station Relay Adapter (MSRA and MSRA-RM) Version DM Engineering

USER GUIDE. DM Engineering Multi Station Relay Adapter (MSRA and MSRA-RM) Version DM Engineering USER GUIDE DM Engineering Multi Station Relay Adapter (MSRA and MSRA-RM) Version 1.35 DM Engineering 2174 Chandler St. Camarillo, CA 91345-4611 805-987-7881 800-249-0487 www.dmengineering.com Overview:

More information

YSC -HD-AK1 HDMI / HD-SDI

YSC -HD-AK1 HDMI / HD-SDI Remote Head Kamera 1/2.7 CMOS 2.14 Megapixel Sensor image memory Video Output 1 HDMI Video Output 2 HD-SDI Video Output 3 HD-SDI signal system 1080p/30fps YSC-HD-AK1 HDMI / HD-SDI POWER HDMI HD-SDI USB

More information

RAKK dac. RAKK dac Mark IV. RAKK dac Mark IV. Assembly and Installation Manual

RAKK dac. RAKK dac Mark IV. RAKK dac Mark IV. Assembly and Installation Manual RAKK dac RAKK dac Mark IV RAKK dac Mark IV Assembly and Installation Manual Version 1.3 2013-2014 Raleigh Audio version Use this manual with RAKK dac Mark IV v 2.0, which is marked on the board. Required

More information

Outdoor & Indoor Full Color LED Display Screen. Installation Manual

Outdoor & Indoor Full Color LED Display Screen. Installation Manual SHENZHEN VISULAL LUMEN CO.,LTD. Outdoor & Indoor Full Color LED Display Screen Installation Manual Thank you for your selected Visuallumen's outdoor & Indoor Full Color LED Display. For proper operation,

More information

VLC-3 USER'S MANUAL. Light Program Controller. M rev. 04 K rev. 00 & ( ( 5, 352*5$0 1 : $ 2 ' 6(77,1*6 )81&7,216

VLC-3 USER'S MANUAL. Light Program Controller. M rev. 04 K rev. 00 & ( ( 5, 352*5$0 1 : $ 2 ' 6(77,1*6 )81&7,216 Light Program Controller VLC-3 USER'S MANUAL +50,1 +50,1 1 : $ ' 2 7. 6 8 ' 5, 7 6 6. $ ( 3 352*5$0 0,16(& )81&7,216 6(77,1*6 & 8 5 5 ( 1 7 3 ( 5, 2 ' M 890-00189 rev. 04 K 895-00406 rev. 00 GENERAL...

More information

ENGR 1000, Introduction to Engineering Design

ENGR 1000, Introduction to Engineering Design ENGR 1000, Introduction to Engineering Design Unit 2: Data Acquisition and Control Technology Lesson 2.4: Programming Digital Ports Hardware: 12 VDC power supply Several lengths of wire NI-USB 6008 Device

More information

Model Colorado Ultra Wide Bandwidth HDTV Matrix Switch

Model Colorado Ultra Wide Bandwidth HDTV Matrix Switch HDTV Supply, Inc www.hdtvsupply.com Model Colorado Ultra Wide Bandwidth HDTV Matrix Switch Overview: This product is a full featured video & audio matrix switch. It is most commonly used to independently

More information

AVTuner PVR Quick Installation Guide

AVTuner PVR Quick Installation Guide AVTuner PVR Quick Installation Guide Introducing the AVTuner PVR The AVTuner PVR allows you to watch, record, pause live TV and capture high resolution video on your computer. Features and Benefits Up

More information

User Manual DV-HDSS-41-TX. 4x1 4K Scaling Presentation Switcher with Dual Outputs. NOTE: See FSR LIT1628 API manual for serial commands.

User Manual DV-HDSS-41-TX. 4x1 4K Scaling Presentation Switcher with Dual Outputs. NOTE: See FSR LIT1628 API manual for serial commands. User Manual DV-HDSS-41-TX 4x1 4K Scaling Presentation Switcher with Dual Outputs NOTE: See FSR LIT1628 API manual for serial commands. 43153 LIT1627 Important Safety Instructions. Table of Contents Important

More information

SingMai Electronics SM06. Advanced Composite Video Interface: HD-SDI to acvi converter module. User Manual. Revision 0.

SingMai Electronics SM06. Advanced Composite Video Interface: HD-SDI to acvi converter module. User Manual. Revision 0. SM06 Advanced Composite Video Interface: HD-SDI to acvi converter module User Manual Revision 0.4 1 st May 2017 Page 1 of 26 Revision History Date Revisions Version 17-07-2016 First Draft. 0.1 28-08-2016

More information

C8188 C8000 1/10. digital audio modular processing system. 4 Channel AES/EBU I/O. features. block diagram. 4 balanced AES inputs

C8188 C8000 1/10. digital audio modular processing system. 4 Channel AES/EBU I/O. features. block diagram. 4 balanced AES inputs features 4 balanced AES inputs Input Sample Rate Converters (SRC) 4 balanced AES outputs Relay bypass for pairs of I/Os Relay wait time after power up Master mode (clock master for the frame) 25pin Sub-D,

More information

Instruction Manual Model Block Up/Downconverter

Instruction Manual Model Block Up/Downconverter Instruction Manual Model 4117-14 Block Up/Downconverter Weather Resistant Unit March 2017, Rev. J Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may

More information

Embedded Master Module

Embedded Master Module September 14, 2011 G H I Comparison Document Embedded Master Module E l e c t r o n i c s GHI Electronics offers various.net Micro Framework hardware solutions that fit a wide range of applications with

More information

Model 5250 Five Channel Digital to Analog Video Converter Data Pack

Model 5250 Five Channel Digital to Analog Video Converter Data Pack Model 5250 Five Channel Digital to Analog Video Converter Data Pack E NSEMBLE D E S I G N S Revision 3.1 SW v2.0.1 This data pack provides detailed installation, configuration and operation information

More information

Anritsu Setup Procedure for GSP-1720 Measurements

Anritsu Setup Procedure for GSP-1720 Measurements GS 09-1313 Rev. 1.0 11-April-2009 Purpose: This procedure demonstrates how to use the Anritsu MT8803G to place a GSP-1720 modem into a call state. After the lab technician becomes familiar with this process,

More information

Personal Information Page

Personal Information Page Rev. 08.29.07 Personal Information Page Installing Dealer Name Date of Installation Day Month Year Type of System Executive MD500 MD1000.2 MHDTV MD5Slim MSD60 Freedom (not recommended) Serial Number of

More information

TeamWork Kits Installation Guide

TeamWork Kits Installation Guide TX 0 RX COM +5V APARATUS US TeamWork Kits Installation Guide TeamWork 400 and TeamWork 600 Kits The TeamWork 400 and TeamWork 600 kits consist of an HDMI switcher, system controller, Cable Cubby, and cables

More information

DIGITAL PORTABLE RECORDER TRAINING MANUAL FOR COURT REPORTING OFFICERs

DIGITAL PORTABLE RECORDER TRAINING MANUAL FOR COURT REPORTING OFFICERs SUPREME & NATIONAL COURTS OF JUSTICE Court Reporting Service DIGITAL PORTABLE RECORDER TRAINING MANUAL FOR COURT REPORTING OFFICERs Author: Training Manager CRS 15/1/16 1 Contents Page 1. Portable case

More information

USB-TG124A Tracking Generator User Manual

USB-TG124A Tracking Generator User Manual USB-TG124A Tracking Generator User Manual Signal Hound USB-TG124A User Manual 2017, Signal Hound, Inc. 35707 NE 86th Ave La Center, WA 98629 USA Phone 360.263.5006 Fax 360.263.5007 This information is

More information

Scan Converter Quick Installation Guide

Scan Converter Quick Installation Guide Scan Converter Quick Installation Guide Software Note: No software is required to use your scan converter. Please complete the hardware installation and system setup before you determine the need to the

More information

MODEL 5493A DTMF MODEM

MODEL 5493A DTMF MODEM USER S GUIDE MODEL 5493A DTMF MODEM SIGNALCRAFTERS TECH, INC. 57 Eagle Rock Avenue, East Hanover, NJ 07936 Tel: 973-781 - 0880 or 800-523 - 5815 Fax: 973-781 - 9044 http://www.signalcrafters.com 01/07/2009

More information

USER'S MANUAL. Getting started with ALEXAN ATMEL AT89C2051/AT89C4051 Training Module - 1

USER'S MANUAL. Getting started with ALEXAN ATMEL AT89C2051/AT89C4051 Training Module - 1 USER'S MANUAL Getting started with ALEXAN ATMEL AT89C05/AT89C405 Training Module - Version.0 Copyright 006 Ace Electronic Technology Inc. All Rights Reserved Alexan 05/405 TM- v..0 Page of 7 About This

More information

Technical data. General specifications. 60 ma Power consumption P 0. 1 W Time delay before availability t v. 120 ms Interface. Protocol IO-Link V1.

Technical data. General specifications. 60 ma Power consumption P 0. 1 W Time delay before availability t v. 120 ms Interface. Protocol IO-Link V1. Model Number Single head system Features IO-link interface for service and process data Programmable via DTM with PACTWARE programmable switch outputs Selectable sound lobe width Synchronization options

More information

Table of Contents. Versa TILE & Versa DRIVE D2 Quick Start Manual

Table of Contents. Versa TILE & Versa DRIVE D2 Quick Start Manual Versa TILE & Versa DRIVE D2 Table of Contents 1. Introduction 2 2. Versa TILE Assembly & Cabling 2 3. Computer & Versa DRIVE Connections 2 4. RasterMAPPER 3 5. Buffer Board 4 6. Testing the System 5 7.

More information