Industrial Wi-Fi Access Point and Client - DM500

Transcription

1 Industrial Access Point and Client - High Performance Entry-Level Access Point The is an IEEE n Access Point, that provides even for very demanding applications sufficient performance at a maximum data transfer rate of 300 Mbps and a Gigabit Ethernet port. The supports in the 2.4 GHz and 5 GHz range. The use of frequencies in the 5 GHz band is ideal for applications in industrial environments, as this area has 19 non-overlapping channels. The 2.4 GHz band has 3 nonoverlapping channels and is therefore for disorders such as Crosstalk vulnerable. The rugged metal housing is very compact and perfect for the installation in the control cabinet, thanks to the DIN rail mount. Along with the wide operating temperature range, the is therefore ideally suited for the industrial use. In addition to Access Point mode, the can also operate as a client or WDS Bridge. This allows you, for example, to replace an Ethernet cable, or significantly increase a radio cell. 1

2 Industrial Access Point and Client - Technical Details General Data Type Access-Point and Client Wifi standard (highest) IEEE n Frequency ranges 2.4 GHz, 5 GHz Amount Wifi modules 1 Amount antennas 2 Antenna connector Reverse Polarity SMA (f) Antenna diversity Copper ports 1 Resetbutton Watchdog Hardware characteristics module Atheros AR9382 Tx / Rx 2T2R MIMO (2 x 2 with MCS 0-15) IEEE a 54 Mbps IEEE b 11 Mbps IEEE g 54 Mbps IEEE n 300 Mbps IEEE i WPA / WPA2 / TKIP / PSK / AES / CCMP WEP 64-bit / 128-bit encryption Frequency range , , MHz Access Point mode Client mode WDS Bridge Ethernet Connector TX RJ45 10/100/1000BaseTX 1 Ports IEEE BaseT / CSMA/CD (Ethernet) IEEE 802.3a 10Base2 IEEE 802.3i 10BaseT IEEE 802.3u 100BaseTX/T4/FX / Fast Ethernet IEEE 802.3ab 1000BaseT(X) / Gigabit Ethernet via UTP Speed 10/100/1000 Mbps Power supply Power supply V DC 9 48 V DC Power supply connector Terminal blocks 3-pin (m) Reverse polarity protection Power consumption typical 5.85 W Input current (9V DC) 0.65 A 2

3 Industrial Access Point and Client - Technical Details Protocols Configuration Network security Alerts Event Housing material Ingress protection Dimensions (W x H x D) Weight Installation Software characteristics ICMP / TCP / UDP / DHCP Server/Client / DNS / SNMP / NTP / SMTP / HTTP / IPv4 / 802.1x / RADIUS / STP/RSTP Webbrowser, Telnet, SSH, Windows Software Client Isolation, Firewall / Filtering, Turn off Radio Physical characteristics Environmental / SNMP Trap Metal IP50 47 x 110 x 90 mm 500 g DIN rail or wall mount Operating temperature range C Storage temperature range C Humidity 5 95 % RH (non condensing) Shock EN Free fall IEC Vibration EN CE Approvals 1999/5/EC Safety EN EMC EN /17 (Class A) Radio EN , EN EN ESD Contact Discharge: ± 8 KV - Level 4 Air Discharge: ± 15 KV - Level 4 EN , RS Radiated (Enclosure): 10 (V/m) - Level 3 EN , EFT EN Surge AC Power Port: ± 2.0 KV - Level 3 Port: ± 2.0 KV - Level 4 AC Power Port: Line-to-Line ± 1.0 KV - Level 3 AC Power Port: Line-to-Earth ± 2.0 KV - Level 3 Port: Line-to-Earth ± 2.0 KV - Level 3 EN CS Conducted (Enclosure): 10 V rms - Level 3 EN PFMF (Enclosure): 10 (A/m) - Level 3 ERM EN BRAN EN EMF EN EMS EN 55022, EN RoHS WEEE Hazardous areas IEC

4 Industrial Access Point and Client - Technical Details Europa (ETSI) 2.4 GHz 5 GHz (20 MHz) / (40 MHz) Frequency (20 MHz) / (40 MHz) Data Rate a 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 Mbps b 1 / 2 / 5,5 / 11 Mbps g 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 Mbps n 20 MHz bandwidth n 40 MHz bandwidth a 1 Nss: GI / GI (Max.) 2 Nss: GI / GI (Max.) 1 Nss: GI / GI (Max.) 2 Nss: GI / GI (Max.) Output Power / 9 / 12 / 18 / 24 Mbps Mbps Mbps Mbps b +14 dbm +17 6, 9, 12, 18, 24 Mbps Mbps g Mbps Mbps n 2.4GHz/ HT n 2.4GHz/ HT n 5GHz/HT n 5GHz/HT MCS 0/8 +16 MCS 4/ MCS 1/9 +16 MCS 5/ MCS 2/ MCS 6/ MCS 3/ MCS 7/ MCS 0/8 +15 MCS 4/ MCS 1/9 +15 MCS 5/ MCS 2/ MCS 6/ MCS 3/ MCS 7/ MCS 0/8 +15 MCS 4/ MCS 1/ MCS 5/ MCS 2/ MCS 6/ MCS 3/ MCS 7/ MCS 0/8 +14 MCS 1/9 +14 MCS 2/ MCS 3/ MCS 4/ MCS 5/ MCS 6/ MCS 7/15 4

5 Industrial Access Point and Client - Technical Details Data Rate IEEE Spec (1Rx dbm) Typ./Max. (2 Rx dbm) Data Rate IEEE Spec (1Rx dbm) Typ./Max. (2 Rx dbm) Receiver Sensitivity Receiver Sensitivity 6M /-85 MCS /-85 9M /-84 MCS /-82 12M /+82 MCS / a 18M /-80 24M / a/n HT20 MCS /-77 MCS /-73 36M /-73 MCS /-69 48M /-69 MCS /-68 54M /-68 MCS /-67 1M not specified -98/-85 MCS / b 5.5M not specified -98/-85 MCS /-79 11M not specified -94/-85 MCS /-77 6M /-85 9M / a/n HT40 MCS /-74 MCS /-70 12M /-82 MCS / g 18M /-80 24M /-77 MCS /-65 MCS /-64 36M /-73 MCS /-85 48M /-69 MCS /-82 54M /-68 MCS / b/g/n HT20 MCS /-77 MCS /-73 MCS /-69 MCS /-68 MCS /-67 MCS /-82 MCS /-79 MCS / b/g/n HT40 MCS /-74 MCS /-70 MCS /-66 MCS /-65 MCS /-64 5

6 Industrial Access Point and Client - Applications Basic Access Point Setup Coverage Range Extender Setup Laptop WDS Hybrid Control Room Regular Access Point IP Camera WDS Root WDS Hybrid Basic WDS Setup Laptop Laptop PC Control Room Switch WDS Root WDS Hybrid IP Camera Smart Phone Tablet PC Access Point Setup PC Control Room Access Point Switch Access Point Client IP Camera 6

7 Industrial Access Point and Client - Factory settings General settings Operation mode Regular AP SSID Security Settings Disabled system settings Username adm Password network settings IP Address Subnet Mask Default Gateway Preferred DNS Dimensions ANT1 Regular AP WDS Bridge AP Client 5 Ghz W Locate RUN Reset ANT2 Front Left Right Rear Bottom Top 7

8 Industrial Access Point and Client - Optional Accessories MMO NF WMLPVIDB244958PTRPC MP PTNF General Data Type Rod antenna Low-profile antenna Panel antenna Radiation type Omnidirectional Omnidirectional Directional Antenna connector N (f) RP TNC (m), 40 cm N (f), 30 cm Frequency range / MHz / MHz / MHz Gain 6 / 8 dbi 4 / 4 dbi 8 / 9 dbi Cable group Cable group 1 N-connector Antenna to SMA Reverse WI-FI AP CBL M-N1-S2 2 meters CBL M-N1-S2 5 meters CBL M-N1-S2 10 meters Cable group 2 TNC Bulkhead in control cabinet to AP with SMA Reverse CBL M-T10-S2 1 meter Box Contents 1x Industrial Access Point 1x Terminalblock 3-pin 1x DIN Rail Kit (mounted on device) 1x Quick Start Guide 1x CD (Manual) Box Contents Set 1x Industrial Access Point 2x 3/5 dbi Antenna 1x Power supply 1x Terminalblock 3-pin 1x DIN Rail Kit (mounted on device) 1x Quick Start Guide 1x CD (Manual) CAT--V1.1-EN ed. 12/16 Welotec GmbH 8