1310nm Single Channel Optical Transmitter
|
|
- Madlyn Byrd
- 5 years ago
- Views:
Transcription
1 0nm Single Channel Optical Transmitter TRPVGETC000EG Pb Product Description The TRPVGETC000EG is a single channel optical transmitter module designed to transmit optical serial digital signals as defined in SMPTE The module is specifically designed for robust performance in the presence of SDI pathological patterns for SMPTE 9M, SMPTE M, SMPTE 9M and SMPTE M serial rates. The SFP transmitter provides an excellent solution for transmission at 0nm to provide errorfree transmission of signals from 0Mb to Gb over single mode fiber. The product is RoHS 6/6 compliant and is designed and tested in accordance with industry safety standards. The transceiver is Class I laser product per U.S. FDA/CDRH and international IEC608 standards. The TRPVGETC000EG connects to standard 0pad SFP connector for hot plug capability. This allows the system designer to make configuration changes or maintenance by simply plugging in different transceivers without removing the power supply from the host system. The SFP transmitter also provides extensive operational status monitoring through an I C interface. Output optical power, bias current, supply voltage and operating temperature are monitored. If a parameter monitored is outside the predefined range, the alarm/warning flag associated with the parameter will be raised. Features Multirate from 0Mb to Gb for up to 0km singlemode fiber Maximum distance of 0km under worst case conditions and Gb video pathological signals Supports video pathological patterns for SDSDI, HDSDI and GSDI Digital diagnostics and control via I²C interface Low Power consumption (Typically 00mW) RoHS compliant SMPTE compatible Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Storage Temperature Range T ST C Case Operating Temperature Commercial T OP + 70 C Operating Relative Humidity RH 0 80 % Supply Voltage Range V CC V Measured on top side of SFP module at the front center vent hole of the cage. Non condensing An Oplink Company S086. Rev.0. (web) 0008
2 TRPVGETC000EG Transmitter Performance Characteristics (Over Operating Case Temperature. V CC =. to.7v) Data Rate B 0.0 Gb/s Center Wavelength λ C nm Spectral Width Δλ MS. nm Average Optical Output Power P Avg 0 dbm Extinction Ratio ER 7 db.97gb/s,.8gb/s, Mb/s, PRBS Optical Signal Intrinsic Jitter Optical Signal Rise Time (0% to 80%) Optical Signal Fall Time (0% to 80%).97Gb/s SMPTE M 70.8Gb/s SMPTE 9M Mb/s, SMPTE 9M 0 80 SMPTE M.97Gb/s SMPTE 9M.8Gb/s tr 70 SMPTE 9M 70Mb/s SMPTE M.97Gb/s SMPTE 9M.8Gb/s tf 70 SMPTE 9M 70Mb/s Laser Power Monitoring Accuracy + db Measured at C As specified in SMPTE 9M, SMPTE M, SMPTE 9, or SMPTE M for the corresponding electrical signal. Test method shall conform to SMPTE RP 8 Rise/fall times are measured following a fourthorder BesselThomon filter with a db point at 0.7 x data rate in MHz Electrical Characteristics (Over Operating Case Temperature. V CC =. to.7v) Differential Input Voltage Swing V PPDIFF 0.. V Input HIGH Voltage (TX Disable) V IH Vcc V Input LOW Voltage (TX Disable) V IL V Output HIGH Voltage (TX Fault) V OH Vcc V Output LOW Voltage (TX Fault) V OL V There is an internal.7kω to 0kΩ pullup resistor to VccT. Open collector compatible,.7kω to 0kΩ pullup resistor to Vcc (Host Supply Voltage). Electrical Power Supply Characteristics (Over Operating Case Temperature. V CC =. to.7v) Power Supply Voltage V CC...7 V DC Common Mode Voltage V CM 0.6 V Supply Current I VCC 8 ma Power Consumption P W 0 00 mw Maximum Allowable kHz 66 Power Supply Noise kHz 99 mv Oplink Communications, Inc S086. Rev.0. (web) 0008
3 TRPVGETC000EG Timing Specifications Time to Initialize (from power on) t_init 00 ms Tx_Disable Assert Time t_off 0 µs Tx_Disable Negate Time t_on ms I C Clock Rate 0 00 khz Electrical Pad Layout Host Board Connector Pad Layout TX Disable TD (TX DATA IN) TD+ (TX DATA IN+) VccTX Top of Board I C CLK I C DATA Bottom of Board (as viewed thru top of board) Toward Bezel Toward ASIC Application Notes Electrical Interface: Signal interfaces are compatible with the SFP MSA specification. The high speed DATA interface is differential ACcoupled internally and can be directly connected to a.v SERDES IC. All low speed control and sense output signals are open collector TTL compatible and should be pulled up with a.7 0kΩ resistor on the host board. TX_Fault: The output indicates LOW when the transmitter is operating normally and HIGH with a laser fault including laser endoflife. TX Fault is an open collector/drain output and should be pulled up with a.7 0kΩ resistor on the host board. TX_Disable: When the TX Disable pin is at logic HIGH, the transmitter optical output is disabled. The laser is also disabled if this line is left floating, as it is pulled high inside the transceiver. Serial Identification and Monitoring: The module definition of SFP is indicated by the MOD_ABS pin and the wrie serial interface. Upon power up, the wrie interface appears as NC (no connection), and MOD_ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol (standard twowire I C serial interface) and generates the serial clock signal (SCL). The positive edge clocks data into the EEPROM segments of the device that are not write protected, and the negative edge clocks data from the device. The serial data signal (SDA) is for serial data transfer. The host uses SDA in conjunction with SCL to mark the start and end of serial protocol activation. The supported monitoring functions are temperature, voltage, bias current, transmitter power, all alarms and warnings, and software monitoring of TX Fault. The device is internally calibrated. The data transfer protocol and the details of the mandatory and vendor specific data structures are defined in the SFP MSA, and SFF87, Rev. 9.. Power Supply and Grounding: The power supply line should be wellfiltered. All power supply bypass capacitors should be as close to the transceiver module as possible. Oplink Communications, Inc S086. Rev.0. (web) 0008
4 TRPVGETC000EG Interfacing the Transceivers Communication is via a serial wire serial interface. As described in the document SFF87 (REV. 9.) there are two distinct address spaces: Base Address A0(hex) Byte Address Content 0 9 Serial Transceiver ID as defined in SFP MSA 96 7 OPLINK Specific 8 Reserved Base Address A(hex) Byte Address Content 0 Alarm & Warnings thresholds & limits 6 9 External calibration constants (not used) 96 9 Values from real time diagnostic monitoring 0 7 Not used 8 7 Customer specific, writable area 8 Not used Application Schematics Vcc.V Vcc.V µh coil or ferrite bead (<0.Ω series resistance) 0. 6 R R TX Disable TX DATA IN+ 0Ω line 0 8 SFP I C CLK 6 I C DATA TX DATA IN 0Ω line 9,, 7,,, 7 R:.7 to 0kΩ CAP Values in µf No Connection:,, 8, 9, 0,,, Laser Safety: All transceivers are Class I Laser products per FDA/CDRH and IEC608 standards. They must be operated under specified operating conditions. Oplink Communications, Inc. DATE OF MANUFACTURE: This product complies with CFR 00.0 and 00. Meets Class I Laser Safety Requirements Oplink Communications, Inc S086. Rev.0. (web) 0008
5 TRPVGETC000EG Package Outline.80 [.66] 9.0 [.6] 6. [.6] 6 Landing Pkwy Fremont, CA 98 Tel: (0) 9700 Fax: (0) Sales@Oplink.com [.70].9 [.88].6 [.6].00 [.77].99 [.078] [.7] [.0].80 [.] Ordering Information.9 [.090] 0. [.].9 [.09].0 [.098] All dimensions shown are in [inches] and Millimeters. Millimeters are the primary units. Tolerances are in accordance with SFF8 Rev.. Model Name Operating Temperature Nominal Wavelength Distance TRPVGETC000EG C to +70 C Commercial 0nm 0km Oplink Communications, Inc. reserves the right to make changes in equipment design or specifications without notice. Information supplied by Oplink Communications, Inc. is believed to be accurate and reliable. However, no responsibility is assumed by Oplink Communications, Inc. for its use nor for any infringements of third parties, which may result from its use. No license is granted by implication or otherwise under any patent right of Oplink Communications, Inc. 0, Oplink Communications, Inc. S086. Rev.0. (web) [.0] 0. [.08] 8.6 [.]
1310nm Video SFP Optical Transceiver
0nm Video SFP Optical Transceiver TRPVGELRx000MG Pb Product Description The TRPVGELRx000MG is an optical transceiver module designed to transmit and receive electrical and optical serial digital signals
More informationCWDM Optical Transceiver
CWDM Optical Transceiver TPVGKEx000xxG Pb Product Description The TPVGKEx000xxG is an optical transceiver module designed to transmit and receive electrical and optical serial digital signals as defined
More informationVery Long Haul Multi-rate Gigabit Ethernet SFP CWDM Transceivers with Digital Diagnostics
Very Long Haul Multi-rate Gigabit Ethernet SFP CWDM Transceivers with Digital Diagnostics Pb Product Description The SFP series of multi-rate fiber optic transceivers with integrated digital diagnostics
More informationPower (dbm) λ (nm) LINK DISTANCE SDI Bit Rate Max. Link Distance (km) 3G-SDI 2.97Gbps 30 HD-SDI 1.485Gbps 30 SD-SDI 270Mbps 30
1310 nm / 3 Gb/s Medium Power SM Video SFP Transceiver (RoHS Compliant) **********************************************************************************************************************************************************************
More information1550 nm TX / 1310 nm RX / 3 Gb/s Medium Power 1-Fibre SM Video SFP Transceiver
1550 nm TX / 1310 nm RX / 3 Gb/s Medium Power 1-Fibre SM Video SFP Transceiver (RoHS Compliant) **********************************************************************************************************************************************************************
More information3G-SDI Video SFP CWDM nm 40km Optical Transceivers
Features 3G-SDI Video SFP CWDM 1270-1610nm 40km Optical Transceivers HD-SDI SFP Transceiver available SD-SDI SFP Transceiver available 3G-SDI SFP Transceiver available SMPTE 297-2006 Compatible. Metal
More informationCWDM / 3 Gb/s Medium Power SM Video Digital Diagnostic SFP Transceiver
CWDM / 3 Gb/s Medium Power SM Video Digital Diagnostic SFP Transceiver (RoHS Compliant) **********************************************************************************************************************************************************************
More informationOC-48/STM-16 SFP Transceiver (SR) RSP25SS1
RoHS Compliant OC-48/STM-16 SFP Transceiver (SR) RSP25SS1 Applications SONET OC-48 / SDH STM-16 Gigabit Ethernet (1000Base-SX) 1X / 2X Fiber Channel CPRI Line Rate Option 2: 1.2288Gb/s CPRI Line Rate Option
More informationOC-48/STM-16 Bi-directional SFP Transceiver (40km) RBT25SI2
RoHS Compliant OC-48/STM-16 Bi-directional SFP Transceiver (40km) RBT25SI2 Applications SONET OC-48 / SDH STM-16 Gigabit Ethernet 1X / 2X Fiber Channel Features Description RoHS compliant 2.5Gb/s, 40Km
More informationCWDM / 12 Gb/s Medium Power SM Video Digital Diagnostic SFP+ Transceiver
SPS-2310VW-CXX0G CWDM / 12 Gb/s Medium Power SM Video Digital Diagnostic SFP+ Transceiver (RoHS Compliant) FEATURES SMPTE 2082, SMPTE 424M, SMPTE 292M, SMPTE 259M, and DVB-ASI Compatible Hot-Pluggable
More informationSPCxxB10100D SFP+ Dual Fiber CWDM CWDM / 10dB / 10 Gigabit Ethernet
SPCxxB10100D SFP+ Dual Fiber CWDM CWDM / 10dB / 10 Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This transceiver
More informationGbE SFP CWDM Transceiver (120km) RCP12SVX
RoHS Compliant GbE SFP CWDM Transceiver (120km) RCP12SVX Applications Gigabit Ethernet 1x Fiber Channel Features Up to 1.25Gb/s, 120Km optical data link Eight wavelengths CWDM transceivers Uncooled CWDM
More informationSPDxx040100D SFP+ Dual Fibre DWDM 100GHz DWDM / 40 km / 10 Gigabit Ethernet
SPDxx040100D SFP+ Dual Fibre DWDM 100GHz DWDM / 40 km / 10 Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This
More informationSFCxxB16GExD SFP Dual Fibre CWDM ITU CWDM / 16dB / Gigabit Ethernet
SFCxxB16GExD SFP Dual Fibre CWDM ITU CWDM / 16dB / Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This transceiver
More informationSFCxxB24GExD SFP Dual Fibre CWDM CWDM / 24dB / Gigabit Ethernet
SFCxxB24GExD SFP Dual Fibre CWDM CWDM / 24dB / Gigabit Ethernet For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This transceiver
More informationThe receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting postamplifier
Applications o 10GBASE-LR at 10.3125 Gbps o 10GBASE-LW at 9.953 Gbps o Other Optical Links Product Description XTBxxA-10LY 10 Gbps SFP+ Bi-Directional Transceiver, 10 km Reach 1270/1330 nm TX/1330/1270
More informationCWDM / 3 Gb/s Medium Power Optical SM Digital Diagnostic Transmitter/Receiver FVD2-1TR-SM30-XX
CWDM / 3 Gb/s Medium Power Optical SM Digital Diagnostic Transmitter/Receiver Features FVD2-1TR-SM30-XX SMPTE 297-2006 Compatible Speed from 50kbps to 3Gbps Power Budget > 15 db Support Video Pathological
More information1550 nm / 3 Gb/s Medium Power Single Optical SM Digital Diagnostic Transmitter FVD2-1TR-SM50
1550 nm / 3 Gb/s Medium Power Single Optical SM Digital Diagnostic Transmitter FVD2-1TR-SM50 Features SMPTE 297-2006 Compatible Speed from 50 Mbps to 3Gbps with up to 50 km Single-mode Fiber Distance up
More informationFTS-R27G-S31L-002DI. Multirate SFP 125Mbps-2.67Gbps, 1310nm, single-mode, 2km
FTS-R21G-S31L-002D Multirate SFP 125Mbps-2.67Gbps, 1310nm, single-mode, 2km Description FTS-R27G-S31L-002D series SFP transceiver can be used to setup a reliable, high speed serial data link over single-mode
More informationFTS-M12G-S85L-55M. SFP 1000Base-SX, 850nm, multi-mode, 550m
FTS-M12G-S85L-55M SFP 1000Base-SX, 850nm, multi-mode, 550m Description FTS-M12G-S85L-55M series SFP transceiver can be used to setup a reliable, high speed serial data link over multi-mode fiber. Maximum
More information3G-SDI Video SFP Rx Optical Receivers
3G-SDI Video SFP Rx Optical Receivers Features HD-SDI SFP Receiver available SD-SDI SFP Receiver available 3G-SDI SFP Receiver available SMPTE 297-2006 Compatible. Metal enclosure for Lower EMI PIN photodetector
More informationPart Number Transmitter Output Power Receiver Sensitivity Reach Temp DDM RoHS. Logic Symbol Name/Description Note 1 - GND Module Ground 1
Product Features Compliant with IEEE Std 802.3-2005 10Gb Ethernet 10GBase-BX XFP MSA Rev. 4.5 compliant Full digital diagnostic management interface XFP MSA package with Single LC receptacle optical Uncooled
More informationFTS-S12G-B53Y-005. SFP 1000Base-LX, BiDi, 1550/1310nm, single-mode, 5km
FTS-S12G-B53Y-005 SFP 1000Base-LX, BiDi, 1550/1310nm, single-mode, 5km Description FTS-S12G-B53Y-005 series SFP transceiver can be used to setup a reliable, high speed serial data link over single-mode
More informationAddOn Computer s SFP transceivers are RoHS compliant and lead- free.
SFP- SX INDUSTRY STANDARD 1000BASE- SX SFP MMF 850NM 550M REACH LC www.addoncomputer.com SFP- SX 1.25Gbps SFP Transceiver Features Up to 1.25Gb/s data links Duplex LC connector Hot- pluggable SFP footprint
More informationSpecification. Small Form Factor Pluggable Transceiver (MSA) LC Receptacle SFP+ 12 Gigabit SDI TIM-A1CB1-F11
Specification Small Form Factor Pluggable Transceiver (MSA) LC Receptacle SFP+ 12 Gigabit SDI TIM-A1CB1-F11 Model Name Description Voltage Category Device type Interface LOS Temperature Distance Latch
More information10G E-PON ONU PR-30 Transceiver (20km)
10G E-PON ONU PR-30 Transceiver (20km) P2757-64D20-RSP Features 10G/10G E-PON ONU PR-30 SFP+ BIDI SC/UPC 1270nm Burst Mode Transmitter with DFB Laser 1577nm Continuous Mode Receiver with APD-TIA Up to
More information10G/1G E-PON ONU SFP+ Bidi Optical Transceiver (20km) P3157-8D20-RSP
10G/1G E-PON ONU SFP+ Bidi Optical Transceiver (20km) P3157-8D20-RSP Features 10G / 1G E-PON ONU SFP+ 1310nm Burst Mode Transmitter with DFB Laser 1577nm Continuous Mode Receiver with APD-TIA Up to 20km
More informationSFP+ BIDI Series Preliminary EOLP-BI1696-XAD & EOLP-BI1696-XDA Series
EOLP-BI1696-XAD & EOLP-BI1696-XDA Series Tx: 1270nm/Rx: 1330nm BIDI SFP+ Transceiver for 10GbE Tx: 1330nm/Rx: 1270nm BIDI SFP+ Transceiver for 10GbE RoHS 6 Compliant Features Operating data rate up to
More informationSFP-10G-LR (10G BASE-LR SFP+) Datasheet
SFP-10G-LR (10G BASE-LR SFP+) Datasheet Features Supports rate from 1.25 Gb/ to 10.3 Gb/s bit rates Optical interface compliant to IEEE 802.3ae Electrical interface compliant to SFF-8431 1310nm DFB transmitter,
More informationEOLP-BI1696-XAD & EOLP-BI1696-XDA Series
EOLP-BI1696-XAD & EOLP-BI1696-XDA Series Tx: 1270nm/Rx: 1330nm BIDI SFP+ Transceiver for 10GbE Tx: 1330nm/Rx: 1270nm BIDI SFP+ Transceiver for 10GbE RoHS 6 Compliant Features Operating data rate up to
More informationFTX-S1XG-S55L-040DI. XFP 10GBase-ER, 1550nm, single-mode, 40km
FTX-S1XG-S55L-040D XFP 10GBase-ER, 1550nm, single-mode, 40km Description FTX-S1XG-S55L-040D series XFP transceiver can be used to setup a reliable, high speed serial data link over single-mode fiber. Maximum
More informationXFP-1020-WA/B 10Gbps XFP Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX
Features XFP-1020-WA/B 10Gbps XFP Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX Supports 9.95Gb/s to 10.5Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 20km
More informationGigabit Ethernet LC Bi-directional SFP Transceivers RBT12SLX
RoHS Compliant Gigabit Ethernet LC Bi-directional SFP Transceivers RBT12SLX Applications Gigabit Ethernet / Fast Ethernet 1X Fiber Channel CPRI: 614Mb/s, 1.228Gb/s OBSAI: 768Mb/s, 1.536Gb/s Features RoHS
More information10Gbps SFP+ Optical Transceiver, 10km Reach
10Gbps SFP+ Optical Transceiver, 10km Reach Features Optical interface compliant to IEEE 802.3ae 10GBASE-LR Electrical interface compliant to SFF-8431 Hot Pluggable 1310nm DFB transmitter, PIN photo-detector
More information10G- XFP- LR- AO. 10Gbs XFP Transceiver
10G- XFP- LR- AO BROCADE 10GBASE- LR XFP SMF 1550NM 10KM REACH LC DOM www.addoncomputer.com 10G- XFP- LR- AO 10Gbs XFP Transceiver Features Duplex LC connector Support hot- pluggable Metal with lower EMI
More information10Gbps 10km Range 1310nm SFP+ Optical Transceiver
Page 1 of 9 Overview ARIA s 10Gbps 10km Range 1310nm SFP+ Optical Transceiver is designed to transmit and receive optical data over single mode optical fiber with a link length of up to 10km. The transceiver
More information10Gbps 10km Range SFP+ Optical Transceiver
Page 1 of 9 Overview This 1310 nm Distributed Feedback (DFB) 10Gbps 10km Range SFP+ Optical Transceiver is designed to transmit and receive optical data over singlemode optical fiber with a link length
More informationT A S A 2 N B 1 F A H
Specification Small Form Factor Pluggable Duplex LC Receptacle SFP+ Optical Transceivers 10 Gigabit Ethernet 10GBASE-LR Ordering Information T A S A 2 N B 1 F A H Voltage / Temperature 1. 3.3V / -40 ~
More informationEMPOWERFIBER 10Gbps 2km SFP+ Optical Transceiver EPP C
EMPOWERFIBER 10Gbps 2km SFP+ Optical Transceiver EPP-31192-02C Features Optical interface compliant to IEEE 802.3ae 10GBASE-LR Electrical interface compliant to SFF-8431 Hot Pluggable 1310nm FP transmitter,
More informationGigabit Ethernet CWDM SFP Transceivers
Gigabit Ethernet s Transmitter Specifications (Optical) Features Data rates from 1.062 to 1.25 Gbps 120 km, 80 km, and 50 km reach models Single 3.3 V supply CWDM wavelengths, DFB laser APD receiver (SFP-GDCWEZX-xx)
More information10G- XFP- SR- AO. 10Gbs XFP Transceiver
10G- XFP- SR- AO BROCADE 10GBASE- SR XFP MMF 850NM 300M REACH LC DOM www.addoncomputer.com 10G- XFP- SR- AO 10Gbs XFP Transceiver Features Duplex LC connector Support hot- pluggable Metal with lower EMI
More information10GE BIDI SFP+ Series
10GE BIDI SFP+ Series Datasheet Features: Operating data rate is 10.3Gbps Distance up to 60km Single 3.3V Power supply and TTL Logic Interface Bi-directional single LC Connector Interface Hot Pluggable
More informationProduct Specification. 10Gb/s, 10km XFP Optical Transceiver FTLX1413M3BCL
Product Specification 10Gb/s, 10km XFP Optical Transceiver FTLX1413M3BCL PRODUCT FEATURES Supports 8.5Gb/s to 11.32Gb/s bit rates Power dissipation
More informationSFP-Bxx-ttrr. Up to 80km Sinlge-Mode SFP Transceiver. Features. Applications. Benefits
SFP-Bxx-ttrr SFP-Bxx-ttrr Up to 80km Sinlge-Mode SFP Transceiver Optomark s SFP-Bxx-ttrr transceivers for single fiber bidirectional data communication, are designed according to Small Form Factor Pluggable
More informationProduct Specification XFP 10G LR 20km LC Optical Transceiver
Product Specification 1. Features Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km with SMF 1310nm Uncooled DFB laser XFP MSA package with duplex LC connector
More information10Gb/s SFP+ ER 1550nm Cooled EML with TEC, PIN Receiver 40km transmission distance
Feature 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-ER/EW Electrical interface compliant to SFF-8431 specifications for enhanced 8. and 10 Gigabit small form factor pluggable module SFP+
More informationOC-48/STM-16 LC Bi-directional SFP Transceiver (2km) RBT25xS1
RoHS Compliant OC-48/STM-16 LC Bi-directional SFP Transceiver (2km) RBT25xS1 Applications SONET OC-48 / SDH STM-16 SONET OC-12 / SDH STM-4 SONET OC-3 / SDH STM-1 Gigabit Ethernet 1X / 2X Fiber Channel
More informationProduct Specification. RoHS-6 Compliant 10Gb/s 10km XFP Optical Transceiver FTLX1412M3BCL
Product Specification RoHS-6 Compliant 10Gb/s 10km XFP Optical Transceiver FTLX1412M3BCL PRODUCT FEATURES Supports 9.95Gb/s to 11.3Gb/s bit rates Power dissipation
More informationTunable SFP+ DWDM 10G 80Km ZR SLSSD-10GE-ZR-T
Tunable SFP+ DWDM 10G 80Km ZR SLSSD-10GE-ZR-T Overview 50GHz Full C-band Tunable SFP+ transceivers are designed for use in 10Gb/s to 11.1Gb/s 50GHz DWDM links up to 80km of G.652 fiber. The SFP+ module
More information10Gb/s SFP+ Optical Transceiver Module 10GBASE-LR/LW
10Gb/s SFP+ Optical Transceiver Module 10GBASE-LR/LW Features 10Gb/s serial optical interface compliant to 802.3ae 10GBASE LR Electrical interface compliant to SFF 8431 specifications for enhanced 8.5
More informationApplications LX xDR 10Gb. Gb/s 10km XFP Optical Transceiver
0BProduct Features Compliant with TU-T G.691 STM-64-64. 1 Compliant to EEE Std 802.3-2005 Ethernet 10GBase-LR/LW XFP MSA Rev. 4.5 compliant Full digital diagnostic management interface XFP MSA package
More information10G BiDi XFP 10km Optical Transceiver GBX-xxxx192-LRC
10G BiDi XFP 10km Optical Transceiver GBX-xxxx192-LRC Features Supports 9.95Gb/s to 10.3Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km with SMF 1270/1330nm DFB laser Transmitter
More information10Gb/s 40km DWDM XFP Optical Transceiver
10Gb/s 40km DWDM XFP Optical Transceiver PRODUCT FEATURES Hot-pluggable XFP footprint Supports 9.95Gb/s to 11.3Gb/s bit rates Supports Lineside and XFI loopback RoHS-6 Compliant (lead-free) Power dissipation
More informationPart No. Data Rate Wavelength Interface Temp. DDMI EOLS-BI * (note1) EOLS-BI * (note1) Up to 4.25Gbps 1550nm SC Standard NO
EOLS-BI1348-10 20 30 40 Series EOLS-BI1548-10 20 30 40 Series Single-Mode for 4X/2X/1 FC and GBE application SC/LC Single-Fiber SFP Transceiver RoHS6 Compliant Features Up to 4.25Gbps Data Links A type:
More informationGbE SFP CWDM Transceiver (40km) RCP12SEX
RoHS Compliant GbE SFP CWDM Transceiver (40km) RCP12SEX Applications Gigabit Ethernet 1x Fiber Channel Features Up to 1.25Gb/s optical data link Eight wavelengths CWDM transceivers Uncooled CWDM DFB laser
More informationCWDM GBIC. 1.25Gbps GBIC Optical Transceiver, 80km Reach
CWDM GBIC 1.25Gbps GBIC Optical Transceiver, 80km Reach Features Dual data-rate of 1.25Gbps/1.0625Gbps operation 18 CWDM DFB wavelengths laser and PIN photodetector for 80km transmission Duplex SC optical
More informationApplications: Features: Description: 10G SFP+ Transceiver LR 10km (PLS-10G-LR) Hot Pluggable, Duplex LC, +3.3V 1310nm DFB-LD
Up to 20 km on 9/125µm SMF Single +3.3V Power Supply Built-in digital diagnostic functions Commercial operating temperature range: 0 C to 70 C Features: Supports 9.95 to 10.5Gb/s bit rates Hot-Pluggable
More informationWS G Gbps GBIC Optical Transceiver, 80km Reach
WS G5487 1.25Gbps GBIC Optical Transceiver, 80km Reach Features Dual data-rate of 1.25Gbps/1.0625Gbps operation 1550nm DFB laser and PIN photodetector for 80km transmission Duplex SC optical interface
More informationXFP Bi-Directional 10G 20Km 1270/1330nmTx / 1330/1270nmRx SLXFB-XXXX-20
XFP Bi-Directional 10G 20Km 1270/1330nmTx / 1330/1270nmRx SLXFB-XXXX-20 Description Sourcelight SLXFB-XXXX-20 is compliant with the IEEE803.3ae 10Gbase-Bx. and transmission distance up to 20km on SMF.
More information40GBd QSFP+ SR4 Transceiver
Preliminary DATA SHEET CFORTH-QSFP-40G-SR4 40GBd QSFP+ SR4 Transceiver CFORTH-QSFP-40G-SR4 Overview CFORTH-QSFP-40G-SR4 QSFP+ SR4 optical transceiver are base on Ethernet IEEE P802.3ba standard and SFF
More information10Gb/s XFP Optical Transceiver Module
10Gb/s XFP Optical Transceiver Module WDM/BIDI 1330/1270nm 20km Features 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-LR, single LC connector for bi-directional application, over20km SMF
More informationXFP 10G 850nm 300M SR SLXF-1085-SR
XFP 10G 850nm 300M SR SLXF-1085-SR Overview Sourcelight SLXF-1085-SR is compliant with the 10G Small Form-Factor Pluggable (XFP) Multi-Source Agreement (MSA), supporting data-rate of 10.3125Gbps (10G-SR)
More informationQSFP+ 40GBASE-SR4 Fiber Transceiver
QSFP+ 40GBASE-SR4 Fiber Transceiver Preliminary Features RoHS-6 compliant High speed / high density: support up to 4X10 Gb/s bi-directional operation Compliant to industrial standard SFF-8436 QSFP+ standard
More informationFX-1310-F10 10Gbps XFP Optical Transceiver, 10km Reach
Features FX-1310-F10 10Gbps XFP Optical Transceiver, 10km Reach Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km with SMF 1310nm Uncooled DFB laser XFP MSA
More informationCWDM BIDI SFP Series. EOLS-BI XX 21XX 24XX 26XX 34XX Series. Features. Applications. Ordering information
EOLS-BI1612-19XX 21XX 24XX 26XX 34XX Series Single-Mode 100Mbps to1.25gbps FE/GBE /FC SC/LC Single-Fiber SFP Transceiver RoHS6 Compliant Features Up to 1.25Gbps Data Links 19/21/24/26/34dB power budget
More informationSNS-XFP-10GD-LR 10 Gbps Multi-Rate XFP Transceivers OC192/STM-64, 10GE or 10G FC 1310nm, Single-Mode 10Km, with Digital Diagnostics.
SNS-XFP-10GD-LR 10 Gbps Multi-Rate XFP Transceivers OC192/STM-64, 10GE or 10G FC 1310nm, Single-Mode 10Km, with Digital Diagnostics. Highlights XFP MSA transceiver Multi-Rate: 9.95Gbps to 11.1Gb/s Protocols:
More informationFeatures: Compliance: Applications: Warranty: QSFP-40G-LR4-GT 40GBASE-LR4 QSFP+ SMF Module Cisco Compatible
The GigaTech Products is programmed to be fully compatible and functional with all intended CISCO switching devices. This QSFP+ optical transceiver is compliant with SFF-8436 and QSFP+ MSA standards. This
More informationTHIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
050-307 PRODUCT BRIEF SIZE 8 ELECTRO-OPTICAL CONTACT TRANSMITTER OR RECEIVER MULTI-MODE, 2.5MM TERIMINUS ELIO REV DESCRIPTION DATE APPROVED 2 Preliminary 07/06/2016 MF/RAS/GC 4 Rev up to 4. No change to
More information6ch LC duplex QSFP Receiver ROSA (4ch x 6Gbps) + μ-bosa (2.5Gbps) (2km) FVQ2-4R1B-SM2
6ch LC duplex QSFP Receiver ROSA (4ch x 6Gbps) + μ-bosa (2.5Gbps) (2km) FVQ2-4R1B-SM2 Product Features Video-dedicated transceiver Hot-pluggable QSFP+ form factor One LR4 ROSA and μ-bosa inside package
More informationXFP ZR Optical Transceiver, 80km Reach GX ZRC
XFP ZR Optical Transceiver, 80km Reach GX-55192-ZRC Features XFP MSA Rev 4.5 Compliant Data rate from 9.95Gbps to 11.1Gbps No Reference Clock required Cooled 1550 nm EML and APD receiver link length up
More informationDWDM SFP Series. Laser
EOLS-1603-XXXD Series SFP Single-Mode for DWDM Application Duplex SFP Transceiver Digital Diagnostic Function RoHS6 Compliant Features Operating Data Rate up to 155Mbps Available in all C-Band Wavelengths
More information100G QSFP28 SR4 Transceiver
Preliminary DATA SHEET CFORTH-QSFP28-100G-SR4 100G QSFP28 SR4 Transceiver CFORTH-QSFP28-100G-SR4 Overview CFORTH-QSFP28-100G-SR4 QSFP28 SR4 optical transceivers are based on Ethernet IEEE 802.3bm standard
More informationFeatures: Compliance: Applications: Warranty: 49Y7928-GT QSFP+ 40G BASE-SR Transceiver IBM Compatible
The GigaTech Products 49Y7928-GT is programmed to be fully compatible and functional with all intended LENOVO switching devices. This QSFP+ optical transceiver is a parallel fiber optical module with four
More informationLambdaFLEX Zero Chirp Tunable XFP Module TL8800ZPCND
LambdaFLEX Zero Chirp Tunable XFP Module TL8800ZPCND www.lumentum.com Data Sheet The Lumentum LambdaFLEX tunable XFP module is a high performance tunable pluggable transceiver for use in the C-band window
More informationSingle Fiber SFP Series
SFPS-MR4-MX-3155 and 5531 series SFP Multi-Mode, Single-Fiber Transceiver for 100Mbps to 4.25Gbps FE/GBE /FC Features Up to 4.25Gbps Data Links A type: 1310nm FP TX /1550nm RX B type: 1550nm FP TX /1310nm
More informationGIGALIGHT 300m XFP Optical Transceiver GX SRC
GIGALIGHT 300m XFP Optical Transceiver GX-85192-SRC Features Supports 9.95Gbps to 11.3Gbps bit rates Maximum link length of 300m (50um,MMF,2000MHz.Km) 850nm VCSEL laser and PIN receiver XFP MSA Rev 4.5
More informationXFP Optical Transceiver
XFP Optical Transceiver Small Form-Factor Pluggable (XFP) Fibre Optic Transceivers are compact transceivers used to interface networking devices to fibre or copper networking cables in telecom and data
More informationSHQP28-100G-LR4-B. 103/112Gb/s QSFP28 Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DML/PIN, Single mode, 10km, 0~70 C
SHQP28-100G-LR4-B 103/112Gb/s QSFP28 Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DML/PIN, Single mode, 10km, 0~70 C SHQP28-100G-LR4-B Transceiver module is designed for 103Gigabit and 112Gigabit
More informationDual Fiber SFP Series
SFP-LX, ELX and EX series SFP Single-Mode, Dual Fiber Transceiver for 1.25Gbps FC/GBE Features Operating Data Rate up to 1.25Gbps 10km with 9/125 µm SMF 20km with 9/125 µm SMF 40Km with 9/125 µm SMF Compliant
More informationLambdaFLEX Tunable XFP Module
LambdaFLEX Tunable XFP Module Features: The Oclaro LambdaFLEX TM Tunable XFP module is a high performance tunable pluggable transceiver for use in the C- band window covering 1528nm to 1566nm. The module
More information10303 (10G BASE-LRM SFP+) Datasheet
10303 (10G BASE-LRM SFP+) Datasheet Features Supports 9.95 to 10.3Gbps bit rates Transmission distance up to 300m (OS1 fibre) Transmission distance up to 220m (OM2 fibre) 1310nm FP transmitter, PIN photo-detector
More informationProduct Specification 40BASE-SR4 QSFP+ Gen3 Optical Transceiver Module FTL410QE3C
Product Specification 40BASE-SR4 QSFP+ Gen3 Optical Transceiver Module FTL410QE3C PRODUCT FEATURES Four-channel full-duplex transceiver module Hot Pluggable QSFP+ form factor Maximum link length of 100m
More informationTHIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
050-301 PRODUCT BRIEF SIZE 8 ELECTRO-OPTICAL CONTACT TRANSMITTER OR RECEIVER MULTI-MODE, 1.25MM FERRULE ARINC 801 REV DESCRIPTION DATE APPROVED A Released 09/10/2012 JDO B Revised per DCN 44316 09/10/2012
More informationo-microgigacn Data Sheet Revision Channel Optical Transceiver Module Part Number: Module: FPD-010R008-0E Patch Cord: FOC-CC****
o-microgigacn 4-Channel Optical Transceiver Module Part Number: Module: FPD-010R008-0E Patch Cord: FOC-CC**** Description Newly developed optical transceiver module, FUJITSU s o-microgigacn series supports
More informationEOLQ-851HG-02-MO Series Multi-Mode 100GBASE-SR4 QSFP28 Transceiver RoHS6 Compliant
EOLQ-851HG-02-MO Series Multi-Mode 100GBASE-SR4 QSFP28 Transceiver RoHS6 Compliant QSFP28 Series Features Supports 103.1Gbps aggregate bit rates Single 3.3V Power Supply and Power dissipation < 3.5W Up
More informationProduct Specification 40BASE-SR4 100m QSFP+ Gen2 Optical Transceiver Module FTL410QE2C
Product Specification 40BASE-SR4 100m QSFP+ Gen2 Optical Transceiver Module FTL410QE2C PRODUCT FEATURES Four-channel full-duplex transceiver module Hot Pluggable QSFP+ form factor Maximum link length of
More informationProduct Specification 56Gbps 60/100m QSFP+ Optical Transceiver Module FTL414QB2C APPLICATIONS
Product Specification 56Gbps 60/100m QSFP+ Optical Transceiver Module FTL414QB2C PRODUCT FEATURES Four-channel full-duplex transceiver module Hot Pluggable QSFP+ form factor Maximum link length of 60m
More informationLambdaFLEX Negative Chirp Tunable XFP Module TL8900NACND
LambdaFLEX Negative Chirp Tunable XFP Module TL8900NACND www.lumentum.com Data Sheet The Lumentum LambdaFLEX tunable XFP module is a high performance tunable pluggable transceiver for use in the C-band
More informationQSFP+ 40GBASE-LR4 Fiber Transceiver
QSFP+ 40GBASE-LR4 Fiber Transceiver Preliminary Features RoHS-6 compliant Hot pluggable QSFP+ form factor 40Gbps aggregate rate 4x10Gb/s CWDM transmitter Compliant to industrial standard SFF-8436 QSFP+
More informationOP6F-S04-13-xM Datasheet
Features SFP Multi-Source Agreement compliance Compliant with 4.25G Fiber Channel 400-SM-LC-M standard Compliant with 2.125G Fiber Channel 200-SM-LC-M standard Compliant with 1.0625G Fiber Channel 100-SM-LC-M
More informationQSFP28 Series Preliminary. EOLQ-161HG-20-LA2 Series. Features. Applications. Ordering Information
EOLQ-161HG-20-LA2 Series Single-Mode 100GBASE-eLR4 QSFP28 Transceiver Single-Mode OTU4 4I1-9D1F QSFP28 Transceiver RoHS6 Compliant QSFP28 Series Preliminary Features Supports 103Gbps and 112Gbps Single
More informationDatasheet. 10GBASE-ZR SFP+ 1550nm 80Km DOM Transceiver SFP-10GZR-55. Features. Application
Optical Communication System 10GBASE-ZR SFP+ 1550nm 80Km DOM Transceiver SFP-10GZR-55 Features Hot-pluggable SFP+ footprint Supports 8.5 and 9.95 to 11.3 Gb/s 80km link length 0/70 C case temperature range
More informationGBIC BIDI Series EOLG-BI1X12-X series
EOLG-BI1X12-X series Simplex-Mode 1.25Gbps GBE/FC Simplex SC Single-Fiber SFP Transceiver RoHS6 Compliant Features Support 1.25Gbps data links A type: 1310nmTx/1550nmRx B type: 1550nmTx/1310nmRx 10km with
More informationCWDM SFP Series. EOLS-1624-XX Series. Features. Applications. Ordering Information
EOLS-1624-XX Series Single-Mode SFP CWDM 2.5Gbps SDH/SONET Duplex SFP Transceiver RoHS6 Compliant Features Operating data rate up to 2.5Gbps 18-Wavelength CWDM DFB LD Transmitter from 1270nm to 1610nm,
More informationPart No. Data Rate Distance Interface Temp. DDMI MMF OM3 for 70m QSFP28.100G.SR Gbps
QSFP28, 100G, SR4, 70m/100m, MPO Особенности: - Supports 10.1Gbps aggregate bit rates - Single.V Power Supply and Power dissipation
More informationIntel Ethernet SFP+ Optics
Product Brief Intel Ethernet SFP+ Optics Network Connectivity Intel Ethernet SFP+ Optics SR and LR Optics for the Intel Ethernet Server Adapter X520 Family Hot-pluggable SFP+ footprint Supports rate selectable
More informationParameter Symbol Min. Typ. Max. Unit. Supply Voltage Vcc V. Input Voltage Vin -0.3 Vcc+0.3 V. Storage Temperature Tst C
QSFP-4X10G-LR-S-LEG CISCO 40GBASE-LR4 QSFP+ SMF 1310NM 10KM REACH MPO DOM PARALLEL QSFP-4X10G-LR-S-LEG 40Gbase QSFP+ Transceiver Features Four-Channel full-duplex transceiver modules Transmission data
More informationGBIC BIDI Series EOLG-BI1X12-X series
EOLG-BI1X12-X series Simplex-Mode 1.25Gbps GBE/FC Simplex SC Single-Fiber SFP Transceiver RoHS6 Compliant Features Support 1.25Gbps data links A type: 1310nmTx/1550nmRx B type: 1550nmTx/1310nmRx 10km with
More informationDATA SHEET. Two (2) fibers Detachable HDMI 2.0 Extender,
DATA SHEET Two (2) fibers Detachable HDMI 2.0 Extender, HDFX-300-TR Contents Description Features Applications Technical Specifications Operating Conditions Drawing of Module Drawing of Cable Connection
More informationPRE-QSFP-LR4L 100G QSFP 28 Dual Range Optical Transceiver, 10km. Product Features: General Product Description:
Product Features: -100 Gigabit Ethernet (100GbE) 100GBASE-LR4 & ITU-T G.959.1 4I1-9D1F Dual Rate Transceiver -103.125 & 111.810 Gbit/s Dual Rate Capability -Compliant to IEEE 802.3ba 100GBASE-LR4 [1] and
More information