KRAMER ELECTRONICS LTD. USER MANUAL MODEL: KDS-EN1 HD Video Encoder/Streamer. P/N: Rev 3

Transcription

1 KRAMER ELECTRONICS LTD. USER MANUAL MODEL: KDS-EN1 HD Video Encoder/Streamer P/N: Rev 3

2

3 Contents 1 Introduction 1 2 Getting Started Achieving the Best Performance Recycling Kramer Products 3 3 Overview 4 4 Defining the KDS-EN1 HD Video Encoder/Streamer 5 5 Installing the KDS-EN1 in a Rack 7 6 Connecting the KDS-EN Connecting to the KDS-EN1 via Ethernet Connecting the Balanced/Unbalanced Stereo Audio Input 11 7 Operating the KDS-EN1 Using the Front Panel Buttons Unlocking the Front Panel Buttons Using the Menu Changing the Video Input Selection To Reset the Device to Factory Default Configuration 17 8 Operating the KDS-EN1 Using the Web Pages Accessing the KDS-EN1 Web Pages 19 9 Technical Specifications Default Communication Parameters Default EDID 28 Figures Figure 1: KDS-EN1 HD Video Encoder/Streamer Front Panel 5 Figure 2: KDS-EN1 HD Video Encoder/Streamer Rear Panel 6 Figure 3: Connecting the KDS-EN1 HD Video Encoder/Streamer 8 Figure 4: Local Area Connection Properties Window 10 Figure 5: Internet Protocol (TCP/IP) Properties Window 11 Figure 6: Balanced Stereo Audio Connection 12 Figure 7: Unbalanced Stereo Audio Connection 12 Figure 8: Web Browser Address Bar 19 Figure 9: Home Page 20 Figure 10: Video Parameters Page 20 Figure 11: Audio Parameters Page 21 Figure 12: System Parameters Page 22 Figure 13: TS IP Parameters Page 23 Figure 14: Host IP Parameters Page 23 Figure 15: System Information Page 24 Figure 16: Save Default Confirmation Message 24 Figure 17: Load Default Confirmation Message 25 Figure 18: Restore Initial Settings Confirmation Message 25 Figure 19: Software Upgrade Page 25 KDS-EN1 Contents i

4 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups that are clearly defined by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11: Sierra Video Products. Congratulations on purchasing your KDS-EN1 HD Video Encoder/Streamer which is ideal for broadcast and production studios as well as digital/analog AV authoring. KDS-EN1 - Introduction 1

5 2 Getting Started We recommend that you: Unpack the equipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual Use Kramer high performance, high resolution cables Use only the power cord supplied with the device i Go to to check for up-to-date user manuals, application programs and to check whether firmware upgrades are available (where appropriate). 2.1 Achieving the Best Performance To achieve the best performance: Use only good quality connection cables to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables) Do not secure the cables in tight bundles or roll the slack into tight coils Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer KDS-EN1 away from moisture, excessive sunlight and dust! This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building. 2 KDS-EN1 - Getting Started

6 2.2 Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer s recycling arrangements in your particular country go to our recycling pages at KDS-EN1 - Getting Started 3

7 3 Overview The KDS-EN1 HD Video Encoder/Streamer is ideal as a broadcast quality video scaler and audio embedder/de-embedder for digital signals up to 3G HD-SDI, composite and component video signals, HDMI and balanced audio signals, which are output as an IP stream and as a DVB-ASI signal. All mentions of SDI in this manual include signals up to and including 3G HD-SDI. Note: If the content is protected by HDCP, the stream is not encoded. The KDS-EN1 features: A maximum data rate of 3Gpbs One SDI video, one HDMI, one composite and one component video input One balanced, stereo audio input One TCP/IP output Two ASI outputs The option to select either the embedded audio or to embed two independent audio groups An LCD text display for easy configuration and operation 4 KDS-EN1 - Overview

8 4 Defining the KDS-EN1 HD Video Encoder/Streamer 5 KDS-EN1 Defining the KDS-EN1 HD Video Encoder/Streamer Figure 1 defines the front panel of the KDS-EN1. Figure 1: KDS-EN1 HD Video Encoder/Streamer Front Panel # Feature Function 1 LCD Readout Displays either the input/output resolution currently selected or the menu during configuration 2 ON LED Lights green when the device is powered on 3 LOCK LED Lights orange when the front panel buttons are locked. Lights green when the buttons are unlocked (see Section 7.1) 4 STATUS LED Lights green to indicate that the device is working correctly and that there is a valid input signal. Lights red to indicate a device fault or if there is no valid input signal 5 Menu Navigation Buttons Press the Enter, up ( ), down ( ), left ( ) and right ( ) buttons to navigate the menu, and modify parameters or values 6 ESC Button Press to move back one level through the menu

9 KDS-EN1 Defining the KDS-EN1 HD Video Encoder/Streamer 6 Figure 2 defines the rear panel of the KDS-EN1. Figure 2: KDS-EN1 HD Video Encoder/Streamer Rear Panel # Feature Function 1 2 CV BNC Connector Y BNC Connector Connect to a composite video source Connect to the Y component of the component video source 3 Component Video PB BNC Connector Connect to the Pb component of the component video source 4 INPUTS PR BNC Connector Connect to the Pr component of the component video source 5 AUDIO Balanced Stereo 5-Pin Terminal Block Connect to the balanced, stereo audio source Audio Connector 6 SDI/HD-SDI BNC Connector Connect to the SDI source 7 HDMI Connector Connect to the HDMI source 8 ASI OUT A BNC Connector Connect to the first ASI acceptor 9 Outputs ASI OUT B BNC Connector Connect to the second ASI acceptor 10 IP OUT RJ-45 Connector Connect to the IP acceptor 11 CONTROL RJ-45 Connector Connect to the PC controller via a LAN 12 Grounding Terminal Connect to the common system ground 13 Power Socket Connect the mains power cord 14 Fuse AC mains supply protection fuse 15 Power Switch Turn the device on and off

10 5 Installing the KDS-EN1 in a Rack This section provides instructions on rack mounting the KDS-EN1. KDS-EN1 - Installing the KDS-EN1 in a Rack 7

11 6 Connecting the KDS-EN1 i Always switch off the power to any device before connecting it to your KDS-EN1. After connecting your KDS-EN1, connect its power and then switch on the power to the other devices. Figure 3: Connecting the KDS-EN1 HD Video Encoder/Streamer To connect the KDS-EN1 as illustrated in the example in Figure 3: 1. Connect the composite video source (for example, a composite video player) to the CV INPUT BNC connector. 2. Connect the balanced audio source (for example, a balanced audio player) to the AUDIO INPUT 5-pin terminal block. 8 KDS-EN1 - Connecting the KDS-EN1

12 3. Connect the SDI source (for example, a video camcorder) to the SD/HD-SDI INPUT BNC connector. 4. Connect the HDMI source (for example, a DVD player) to the HDMI INPUT connector. 5. Connect the ASI OUT A BNC connector to the ASI acceptor (for example, an H.264 decoder). 6. Connect the IP OUT RJ-45 connector to the IP acceptor (for example, an IP set top box). 7. Optional Connect a PC controller via a LAN to the CONTROL RJ-45 Ethernet connector. 6.1 Connecting to the KDS-EN1 via Ethernet You can connect the KDS-EN1 via Ethernet via either of the following methods: A crossover cable (see Section 6.1.1) for direct connection to the PC A straight through cable (see Section 6.1.2) for connection via a network hub or network router After connecting the Ethernet port, you have to install and configure your Ethernet Port. For detailed instructions, see the Ethernet Configuration Guide (Lantronix) in the technical support section on our Web site Connecting the Ethernet Port directly to a PC You can connect the Ethernet port on the KDS-EN1 to the Ethernet port on your PC via a crossover cable with RJ-45 connectors. This type of connection is recommended for identification of the factory default IP Address of the KDS-EN1 during the initial configuration. To configure your PC after connecting the Ethernet port: 1. Right-click the My Network Places icon on your desktop. 2. Select Properties. 3. Right-click Local Area Connection Properties. KDS-EN1 - Connecting the KDS-EN1 9

13 4. Select Properties. The Local Area Connection Properties window appears. 5. Select the Internet Protocol (TCP/IP) and click the Properties Button. Figure 4: Local Area Connection Properties Window 6. Select Use the following IP Address and enter the details as shown in Figure 5. You can use any IP address in the range to (excluding ) that is provided by your IT department. 10 KDS-EN1 - Connecting the KDS-EN1

14 Figure 5: Internet Protocol (TCP/IP) Properties Window 7. Click OK Connecting to the Ethernet Port via a Network Switch/Hub To connect to the Ethernet port on the KDS-EN1 via a network switch/hub: Connect the PC to the Ethernet network switch/hub using a straight through cable 6.2 Connecting the Balanced/Unbalanced Stereo Audio Input This section illustrates how to wire the devices to the balanced audio input: A balanced stereo input connection, see Figure 6 An unbalanced stereo input connection, see Figure 7 KDS-EN1 - Connecting the KDS-EN1 11

15 Figure 6: Balanced Stereo Audio Connection Figure 7: Unbalanced Stereo Audio Connection 12 KDS-EN1 - Connecting the KDS-EN1

16 7 Operating the KDS-EN1 Using the Front Panel Buttons Approximately 30 seconds after powering on the KDS-EN1, the model name, firmware version and serial number of the device is displayed (standby display). When this display appears, you can operate the KDS-EN1 via ether the front panel buttons or remotely using Ethernet over a LAN (see Section 8). 7.1 Unlocking the Front Panel Buttons After approximately 30 seconds of no button activity the front panel buttons are locked and the Lock LED lights orange. To unlock the front panel buttons: 1. Press Enter twice in quick succession. 2. Immediately press Esc twice in quick succession. The front panel buttons are unlocked and the Lock LED lights green. 7.2 Using the Menu The menu is shown on the display when the Enter button is pressed. If there is no button activity for approximately 30 seconds, display reverts back to the standby display. Navigation through the menu is performed as follows: Enter display the menu, select a parameter/value, save a value Up ( ) or Right ( ) scroll up through the parameter/value list Down ( ) or Left ( ) scroll down through the parameter/value list ESC Move up one level through the menu or exit the menu if at the first menu level KDS-EN1 - Operating the KDS-EN1 Using the Front Panel Buttons 13

17 The main menu comprises six sub-menus: Video (see Section 7.2.1) Audio (see Section 7.2.2) System (see Section 7.2.3) TS/IP (see Section 7.2.4) Host IP (see Section 7.2.5) Advanced (see Section 7.2.6) Video Sub-menu The parameters in the Video sub-menu set the video characteristics. Parameter Description Options Video Input Video input port selection CVBS, YPbPr, HDMI, SDI Default CVBS Video Resolution The current video signal resolution (not supported by component input), Video GOP Video GOP selection IBBP, IPPP, IBP Default IBBP Video Bit Mode Video bit rate mode selection CBR,VBR Average BitRate Max BitRate (VBR) Min BitRate (VBR) Sets the average video bitrate. This is only valid when in VBR mode and must be more than the average video bitrate Sets the maximum video bitrate. This is only valid when in VBR mode and must be more than the average video bitrate Sets the minimum video bitrate. This is only valid when in VBR mode and must be less than the average video bitrate From 1000Kbps to 19999Kbps From 10000Kbps to 19999Kbps From 1000Kbps to 7999Kbps 14 KDS-EN1 - Operating the KDS-EN1 Using the Front Panel Buttons

18 7.2.2 Audio Sub-menu The parameters in the Audio sub-menu set the audio characteristics. Parameter Description Options Audio Input Audio input source selection Analog, HDMI, SDI Default Analog Audio Format Audio format selection MPEG-I Layer II, S/PDIF AC3 Default MPEG Audio BitRate Audio bitrate selection 32Kbps, 64Kbps, 128Kbps, 192Kbps, 256Kbps, 320Kbps, 384Kbps Default 384Kbps Audio Gain Audio gain selection 12dB, 6dB, 0dB, +6dB, +12dB, Default 0dB System Sub-menu The parameters in the System sub-menu display the system parameters. Parameter Description Options PMT PID Sets the video output PMT PID From 50 to 7999 Default 101 PCR PID Sets the video output PCR PID From 100 to 8190 Default 102 VID PID Sets the video output PID From 100 to 7999 Default 103 AUD PID Sets the audio output PID From 100 to 7999 Default 104 TS ID Sets the transport stream ID From 0 to Default 1 Service ID Sets the output service ID From 1 to Default 1 Service Name Sets the service name Textual name Default TV1 Provider Name Sets the service provider name Textual name Default TV-Channel Packet Size Packet size selection 188, 204 FEC OFF, 204 FEC ON Default 188 System Bitrate Sets the system bitrate From 2000Kbps to 19999Kbps Default 9500Kbps KDS-EN1 - Operating the KDS-EN1 Using the Front Panel Buttons 15

19 7.2.4 TS/IP Sub-menu The parameters in the TS/IP sub-menu set the transport stream IP parameters. Parameter Description Options Stream IP Sets the transport stream IP address Any valid IP address Default Stream Netmask Stream Gateway Sets the transport stream network mask address Sets the transport stream gateway address Any valid netmask IP address Default Any valid gateway IP address Default Stream MAC Sets the physical MAC address Any valid MAC address Default B0-6D Protocol Transport stream protocol selection UDP, RTP, Pro-MPEG Default UDP Destination IP Destination Port Sets the transport stream destination IP address Sets the transport stream destination IP port Any valid IP address Default Any valid IP port Default 1234 IGMP IGMP enable Enable, Disable Default Disable FEC Col Offset Sets the FEC col offset From 4 to 16 Default 10 FEC Col NA Sets the FEC col NA From 4 to 16 Default Host IP Sub-menu The parameters in the Host IP sub-menu display the device network IP parameters. Parameter Description Options Host IP Sets the IP network address of the device All valid IP addresses Default Host Netmask Host Gateway Host MAC Sets the IP network mask of the device Sets the IP gateway address of the device Sets the IP port number of the device All valid subnets Default All valid gateway addresses Default All valid TCP ports Default B0-6C 16 KDS-EN1 - Operating the KDS-EN1 Using the Front Panel Buttons

20 7.2.6 Advanced Sub-menu The parameters in the Advanced Settings sub-menu allow you to save and load configurations, reset to factory defaults, and display the codec version. Parameter Description Save Default Save the current configuration as the default configuration Load Default Load the default configuration Restore Initial Load the factory default configuration Codec Version Displays the codec version 7.3 Changing the Video Input Selection To change the video input selection: 1. Press the Enter button to display the menu. The menu is displayed. 2. Press the Enter button to select the Video Input sub-menu. The Video Input sub-menu is displayed. 3. Press the Enter button to enable changing the parameter. The current video input selection flashes. 4. Using the right ( ) or left ( ) button, move through the parameter options until the required video input is displayed. 5. Press Enter to save the selection. The Updating message flashes for a few seconds and the change is saved. Note: If the media player does not display correctly following input resolution or selection changes, refresh the media player. 7.4 To Reset the Device to Factory Default Configuration To reset the device to the factory default configuration: 1. Press Enter. The menu is displayed. KDS-EN1 - Operating the KDS-EN1 Using the Front Panel Buttons 17

21 2. Press down ( ) repeatedly until the Advanced sub-menu is displayed. 3. Press Enter to enter the Advanced sub-menu. The first option in the Advanced sub-menu is displayed. 4. Press down ( ) repeatedly until the Restore Initial option is displayed. 5. Press Enter. The Updating message flashes for a few seconds and the factory defaults are loaded. 6. Press Esc twice to exit the menu. 18 KDS-EN1 - Operating the KDS-EN1 Using the Front Panel Buttons

22 8 Operating the KDS-EN1 Using the Web Pages The embedded Web pages can be used to remotely operate the KDS-EN1 using a Web browser and an Ethernet connection over a LAN. The menu appears on the left side of the screen. There are ten Web pages: Video Settings Page (see Section 8.1.1) Audio Settings Page (see Section 8.1.2) System Settings Page (see Section 8.1.3) TS/IP Settings Page (see Section 8.1.4) Host IP Settings Page (see Section 8.1.5) System Information Page (see Section 8.1.6) Saving the Default Configuration Page (see Section 8.1.7) Loading the Default Configuration Page (see Section 8.1.8) Load the Factory Defaults Page (see Section 8.1.9) Software Upgrade Page (see Section ) After making changes on any of the pages click Save to save the changes. 8.1 Accessing the KDS-EN1 Web Pages To access the KDS-EN1 Web pages: 1. Open your Internet browser. 2. Enter the IP address of the device (see Section 10) in the address bar of your browser (see Figure 8). Figure 8: Web Browser Address Bar The home page similar to that shown in Figure 9 appears. KDS-EN1 - Operating the KDS-EN1 Using the Web Pages 19

23 Figure 9: Home Page Video Settings Page The following video parameters are included: Input port selection Resolution GOP Encoding mode Average, maximum and minimum bitrates Figure 10: Video Parameters Page For video parameter descriptions see Section KDS-EN1 - Operating the KDS-EN1 Using the Web Pages

24 8.1.2 Audio Settings Page The following audio parameters are included: Input port selection Audio format, bitrate and gain Figure 11: Audio Parameters Page For audio parameter descriptions see Section System Settings Page The following system parameters are included: PMT PID PCR PID VID PID AUD PID Service name and provider name TS ID Service ID Packet size System bitrate KDS-EN1 - Operating the KDS-EN1 Using the Web Pages 21

25 Figure 12: System Parameters Page For system parameter descriptions see Section TS IP Settings Page The following TS IP parameters are included: Stream IP, netmask and gateway MAC address Protocol Destination IP and port Enable/disable IGMP FEC column offset FEC column Na number 22 KDS-EN1 - Operating the KDS-EN1 Using the Web Pages

26 Figure 13: TS IP Parameters Page For TS IP parameter descriptions see Section Host IP Settings Page The following host IP parameters are included: Host IP, netmask and gateway MAC address Figure 14: Host IP Parameters Page For host IP parameter descriptions see Section KDS-EN1 - Operating the KDS-EN1 Using the Web Pages 23

27 8.1.6 System Information Page The following system details are displayed (all fields are read only): Device and model name Hardware and software versions IP address Device status Figure 15: System Information Page Saving the Default Configuration Page The Save Default page allows you to store the current configuration. The message shown in Figure 16 is displayed before the operation is executed. Figure 16: Save Default Confirmation Message Loading the Default Configuration Page The Load Default page allows you to retrieve a previously stored configuration. The message shown in Figure 17 is displayed before the operation is executed. 24 KDS-EN1 - Operating the KDS-EN1 Using the Web Pages

28 Figure 17: Load Default Confirmation Message Loading the Factory Defaults Page The Restore Initial page allows you to load the factory default parameters. The message shown in Figure 17 is displayed before the operation is executed. Figure 18: Restore Initial Settings Confirmation Message Software Upgrade Page The Software Upgrade page allows you to upgrade the firmware of the device. Prior to performing this operation, you must download the latest firmware version to your PC. The latest version is available from Figure 19: Software Upgrade Page KDS-EN1 - Operating the KDS-EN1 Using the Web Pages 25

29 9 Technical Specifications INPUTS: Digital Video 1 SDI serial video, 75Ω on BNC connectors 1 HDMI SD SMPTE-259M SMPTE-125M 480i ITU-R BT i 50 5 HD SMPTE-292 SMPTE-296M 720p 59.94/60/50 SMPTE-274M 1080i 59.94/60/ p 29.97/30/ / sF/24sF 3G SMPTE-424M SMPTE-296M 1080p 59.94/60/50 Analog Video 1 Composite video on a BNC connector Analog Audio 1 Component video (Y, Pb, Pr) on 3 BNC connectors. Supported resolutions: 1 Stereo balanced audio on a 5-pin terminal block OUTPUTS: Digital Video 2 DVB-ASI on BNC connectors Max. data rate 72Mbps Packet length 188 bytes IP 1 IP UDP transport stream on an RJ-45 connector CONTROL: 1 TCP/IP on an RJ-45 Connector POWER CONSUMPTION: V AC 50/60Hz 24VA OPERATING TEMPERATURE: STORAGE TEMPERATURE: HUMIDITY: DIMENSIONS: WEIGHT: ACCESSORIES: 0 to +40 C (32 to 104 F) 40 to +70 C ( 40 to 158 F) 10% to 90%, RHL non-condensing 19 x 9.41 x 1U (W, D, H) rack mountable 1.8kg (3.97lbs) approx. Power cord, rack ears 26 KDS-EN1 - Technical Specifications

30 10 Default Communication Parameters Ethernet IP Address Subnet mask Default gateway KDS-EN1 - Default Communication Parameters 27

31 11 Default EDID Monitor Model name... KDS EN1 Manufacturer... KRM Plug and Play ID... KRM0619 Serial number... 1 Manufacture date , ISO week 9 Filter driver... None EDID revision Input signal type... Digital Color bit depth... Undefined Display type... RGB color Screen size x 570 mm (46.0 in) Power management... Not supported Extension blocs... 1 (CEA-EXT) DDC/CI... n/a Color characteristics Default color space... Non-sRGB Display gamma Red chromaticity... Rx Ry Green chromaticity... Gx Gy Blue chromaticity... Bx By White point (default)... Wx Wy Additional descriptors... None Timing characteristics Horizontal scan range kHz Vertical scan range Hz Video bandwidth MHz CVT standard... Not supported GTF standard... Not supported Additional descriptors... None Preferred timing... Yes Native/preferred timing x720p at 60Hz Modeline... "1280x720" hsync -vsync Detailed timing # x720p at 50Hz (16:9) Modeline... "1280x720" hsync -vsync Standard timings supported 720 x 400p at 70Hz - IBM VGA 640 x 480p at 60Hz - IBM VGA 640 x 480p at 67Hz - Apple Mac II 640 x 480p at 72Hz - VESA 640 x 480p at 75Hz - VESA 800 x 600p at 56Hz - VESA 800 x 600p at 60Hz - VESA 800 x 600p at 72Hz - VESA 800 x 600p at 75Hz - VESA 1024 x 768p at 60Hz - VESA 1024 x 768p at 70Hz - VESA 1024 x 768p at 75Hz - VESA 1280 x 1024p at 75Hz - VESA EIA/CEA-861 Information Revision number... 3 IT underscan... Not supported Basic audio... Supported YCbCr 4:4:4... Supported YCbCr 4:2:2... Supported Native formats... 0 Detailed timing # x1080i at 60Hz (16:9) 28 KDS-EN1 - Default EDID

32 Modeline... "1920x1080" interlace +hsync +vsync Detailed timing # x1080i at 50Hz (16:9) Modeline... "1920x1080" interlace +hsync +vsync Detailed timing # x576p at 50Hz (4:3) Modeline... "720x576" hsync -vsync Detailed timing # x480p at 60Hz (4:3) Modeline... "720x480" hsync -vsync Detailed timing # x480p at 60Hz (4:3) Modeline... "640x480" hsync -vsync CE video identifiers (VICs) - timing/formats supported 640 x 480p at 60Hz - Default (4:3, 1:1) 720 x 480p at 60Hz - EDTV (4:3, 8:9) 1280 x 720p at 60Hz - HDTV (16:9, 1:1) 1920 x 1080i at 60Hz - HDTV (16:9, 1:1) 720 x 480i at 60Hz - Doublescan (4:3, 8:9) 1440 x 480p at 60Hz - DVD (4:3, 4:9) 1920 x 1080p at 60Hz - HDTV (16:9, 1:1) 720 x 576p at 50Hz - EDTV (4:3, 16:15) 1280 x 720p at 50Hz - HDTV (16:9, 1:1) 1920 x 1080i at 50Hz - HDTV (16:9, 1:1) 2880 x 576i at 50Hz - Console (4:3, 2:15-20:15) 1920 x 1080p at 50Hz - HDTV (16:9, 1:1) NB: NTSC refresh rate = (Hz*1000)/1001 CE audio data (formats supported) LPCM 2-channel, 16/20/24 bit depths at 32/44/48 khz CE audio data (formats supported) AC-3 8-channel, 448k max. bit rate at 32/44/48/88/96/176/192 khz CE vendor specific data (VSDB) IEEE registration number. 0x000C03 CEC physical address Supports AI (ACP, ISRC).. No Supports 48bpp... No Supports 36bpp... No Supports 30bpp... No Supports YCbCr 4:4:4... No Supports dual-link DVI... No Maximum TMDS clock MHz Report information Date generated... 03/02/2013 Software revision Data source... File Operating system Service Pack 1 Raw data 00,FF,FF,FF,FF,FF,FF,00,2E,4D,19,06,01,00,00,00,09,17,01,03,80,66,39,78,0A,0D,C9,A0,57,47,98,27, 12,48,4C,BF,CF,00,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,1D,00,72,51,D0,1A,20,6E,28, 55,00,7E,88,42,00,00,1A,01,1D,00,BC,52,D0,1E,20,B8,28,55,40,C4,8E,21,00,00,18,00,00,00,FC,00,4B, 44,53,20,45,4E,31,20,20,20,20,20,20,00,00,00,FD,00,32,50,0F,44,0F,00,0A,20,20,20,20,20,20,01,EF, 02,03,20,70,4C,01,02,04,05,06,0E,10,11,13,14,19,1F,23,09,07,07,23,17,7F,38,66,03,0C,00,10,00,00, 01,1D,80,18,71,1C,16,20,58,2C,25,00,C4,8E,21,00,00,9E,01,1D,80,D0,72,1C,16,20,10,2C,25,80,C4,8E, 21,00,00,9E,8C,0A,D0,90,20,40,31,20,0C,40,55,00,13,8E,21,00,00,18,8C,0A,D0,8A,20,E0,2D,10,10,3E, 96,00,13,8E,21,00,00,18,D6,09,80,A0,20,E0,2D,10,08,60,22,00,12,8E,21,08,08,21,08,08,21,08,08,72 KDS-EN1 - Default EDID 29

33

34 For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: info@kramerel.com! SAFETY WARNING Disconnect the unit from the power supply before opening and servicing P/N: Rev: 3