PT9150. Heavy Industrial Incremental Encoder
|
|
|
- Erick Cameron
- 5 years ago
- Views:
Transcription
1 PT950 Heavy Industrial Incremental Encoder Linear Position to 550 inches (00 cm) luminum or Stainless Steel Enclosure Options VLS Option To Prevent Free-Release Damage IP67 NEM 6 Protection GENERL Full Stroke Range Options (on this datasheet) 0-75 to inches Output Signal Options incremental encoder (quadrature) ccuracy 0.0% full stroke (contact factory for higher accuracy) Repeatability ± 0.0% full stroke ±/ pulse max. Resolution Options 0 to 50 pulses per inch Measuring able Options stainless steel or thermoplastic Enclosure Material powder-painted aluminum or 0 stainless steel Sensor optical incremental encoder Maximum Retraction cceleration Maximum Velocity Weight, luminum (Stainless Steel) Enclosure 8 lbs. (6 lbs.) max. ELETRIL Input Voltage Input urrent ENVIRONMENTL Enclosure NEM /X/6, IP 67 Operating Temperature 0 to 60 F (-7 to 7 ) Vibration up to 0 g to 000 Hz maximum 7.9 [00 mm] Output Signal: channel channel channel channel 5. [5 mm] With its incremental optical encoder and industrial design this rugged transducer provides the highest accuracy and longest life of any measurement device of its kind. This model is available in a wide variety of resolutions and output stages to fit virtually any requirement. It can measure up to 550, yet when its cable is retracted it is only 6 long. Its small size and low-cost-to-measurement ratio offers remarkable flexibility and value. 5. [ mm] -- for available channels 060 Plummer Street hatsworth, 9 Meas-Spec.com tel: fax: PT950
2 Fig. Outline Drawing (8 oz. cable tension only) 0.85 [.6] 6.5 ±0.06 [5, ±,5] mounting hole detail 0.6 [6,] 0.7 [6,9] eyelet detail Ø.9 [,9]* Ø.75 [9,5]**.65 [,9]**.80 [,9].0 ±0.08 [7,9 ±,0] full extension full retraction.5 ±0.08 [,8 ±,0] DIMENSION (INHES) MESURING LE RNGE Ø.0 in. Ø.0 in. Ø.07 in. Ø.06 in. 75 n/a n/a n/a n/a n/a n/a n/a n/a n/a..77 n/a 500 n/a.6.97 n/a n/a n/a.90 [,5] 0.5 [6,] 5.6 [,] max..75 ±0.06 [0,7 ±,0] 7.87 [99,9] max. 5.0 [,6] DIMENSIONS RE IN INHES [MM] tolerances are 0.0 IN. [0.5 MM] unless otherwise noted. * tolerance = [+..0] ** tolerance = [+..] Ordering Information: Model Number: PT order code: R D E F G Sample Model Number: PT R D E F range: enclosure/cable tension: measuring cable: cable exit: output signal: resolution: electrical connection: 500 inches aluminum/8 oz..0 nylon-coated stainless front TTL/MOS driver 00 ± pulses per inch 6-pin plastic connector Full Stroke Range: english ranges R order code: * 0500* 0550* full stroke range, min: 75 in. 00 in. 50 in. 00 in. 50 in. 00 in. 50 in. 00 in. 50 in. 500 in. 550 in. metric ranges R order code: * 750* full stroke range, min: 500 mm 750 mm 5000 mm 650 mm 7500 mm 8750 mm 0000 mm 50 mm 500 mm 750 mm * 6 oz. cable tension strongly recommended tel: fax: PT950
3 Ordering Information (cont.): Enclosure Material and Measuring able Tension: order code: tension (±0%): enclosure material: max. acceleration: max. velocity: 8 oz. 6 oz. powder-painted aluminum 0 stainless steel powder-painted aluminum 0 stainless steel g g 5 g 5 g 60 inches/sec 60 inches/sec 00 inches/sec 00 inches/sec standard housing see fig. dual-spring housing see fig. Measuring able: order code: cable construction: available ranges: general use: Ø.0-inch nylon-coated Ø.07-inch bare Ø.058-inch PV jacketed vectra fiber rope Ø.0-inch bare all ranges all ranges up to 500 inches all ranges up to 00 inches 550-inch range only indoor outdoor, debris, high temperature high voltage or magnetic field outdoor, debris, high temperature able Exit: order code: front top back down Output Signals: D order code: output driver: TTL - MOS Open ollector 5 V - Line Driver Universal Line Driver Input voltage ():.5... Vdc 0 m max. 80 m max. Input voltage (): Vdc 0 m max. 80 m max. Input voltage (): 5 Vdc 0 m max. 50 m max. Input voltage (): VD Source/Sink: 0 m max. 00 m max, no load.5... VD VD 5 VD VD output stage ( of 6) Resolution: E order code: english ranges: 00 ± pulses per in. 00 ± pulses per in. 50 ±5 pulses per in. 0 ±0. pulses per in. metric ranges: 5 ±0, pulses per mm 0 ±0, pulses per mm,5 ±0,5 pulses per mm 0,5 ±0,0 pulses per mm tel: fax: PT950
4 Ordering Information (cont.): Electrical onnection: F order code: 6-pin plastic connector 5-ft. instrumentation cable WG, shielded 8-pin plastic connector 6-pin metal connector IP 67, NEM X*,6 IP 67, NEM 6 IP 65, NEM IP 67, NEM 6.0 in. [78 mm].5 in. [6 mm]. in. [60 mm].0.9 in. [8 0 mm] cable dia. 6 WG max conductor size connector: MS0E-S-6P mating plug: MS06E-S-6S 5 ft. x 0.-in. dia. [7,5 M x 5 mm dia.] WG, shielded.6.0 in. [6,6 7,6 mm] cable dia. 0 WG conductor size connector: onxall 8-8PG-00-K mating plug: onxall 8-8SG-6-K /8-in. [9 mm] max cable dia. 6 WG max conductor size connector: MS0E-S-6P mating plug: MS06E-S-6S 6-pin mating plug: 8-pin mating plug: 5-ft. instrumentation cable: TTL/MOS 5 V Line Driver pin Open ollector Universal Line Driver input voltage input voltage common common channel channel D channel channel E - channel ' F - channel ' TTL/MOS 5 V Line Driver pin Open ollector Universal Line Driver input voltage input voltage common common channel channel 6 channel channel channel ' - channel ' 5 - ' TTL/MOS 5 V Line Driver color Open ollector Universal Line Driver red input voltage input voltage black common common green channel channel white channel channel blue - channel ' brown - channel ' yellow - orange - ' contact view D F E contact view * applies to stainless steel enclosure only. VLS Option - Free Release Protection The patented elesco Velocity Limiting System (VLS) is an option for PT9000 Series cable extension transducers that limits cable retraction to a safe 0 to 55 inches per second for the single spring option and 0 to 80 inches per second for the higher tension dual spring option. The VLS option prevents the measuring cable from ever reaching a damaging velocity during an accidental free release. This option is ideal for mobile applications that require frequent cable disconnection and reconnection. It prevents expensive unscheduled downtime due to accidental cable mishandling or attachment failure. How To onfigure Model Number for VLS Option:. using guide below, select PT950 model. remove PT from the model number. add VLS. completed model number! VLS950 - english ranges metric ranges to to 750 PT PT VLS VLS R D E F = available options. tel: fax: PT950
5 Fig. Outline Drawing (6 oz. cable tension only) 5.8 ±0.06 [,6 ±,5] 0.85 [,6] mounting hole detail 0.6 [6,] eyelet detail Ø.9 [,9]* Ø.75 [9,5]**.80 [,9].90 [,5].0 ±0.08 [7,9 ±,0] full extension 0.5 [6,] full retraction.5 ±0.08 [,8 ±,0] 5.6 [,] max. 0.7 [6,9].65 [,9]** MESURING LE RNGE Ø.0 in. Ø.0 in. Ø.07 in. Ø.06 in. 75 n/a n/a n/a n/a n/a n/a n/a n/a n/a..77 n/a 500 n/a.6.97 n/a n/a n/a.75 ±0.06 [0,7 ±,5] DIMENSION (INHES) 9.5 [0] max. DIMENSIONS RE IN INHES [MM] tolerances are 0.0 IN. [0.5 MM] unless otherwise noted. 5.0 [,6] * tolerance = [+..0] ** tolerance = [+..] version:.0 last updated: February, 06 tel: fax: PT950 5
PT9420 Cable Actuated Sensor Industrial ma 0..20mA
PT9 Cable ctuated Sensor Industrial.. m 0..m bsolute Linear Position to 550 inches ( meters) luminum or Stainless Steel Enclosure Options VLS Option to Prevent Free-Release Damage IP68 / NEM 6 Hazardous
PT8420 Cable Actuated Sensor Industrial ma 0..20mA
PT8 Cable ctuated Sensor Industrial.. m..m bsolute Linear Position to 6 inches (5 mm) luminum or Stainless Steel Enclosure Options VLS Option to Prevent Free-Release Damage IP68 / NEM 6 Hazardous rea Certification
PT9232. Heavy Industrial RS232 Communication
PT9232 Heavy Industrial RS232 Communication Linear Position/Velocity to 550 inches (1400 cm) luminum or Stainless Steel Enclosure Options VLS Option To Prevent FreeRelease amage IP68 NEM 6 Protection GENERL
PT9232. Heavy Industrial RS232 Communication
PT9232 Heavy Industrial RS232 Communication Linear Position/Velocity to 550 inches (1400 cm) luminum or Stainless Steel Enclosure Options VLS Option To Prevent FreeRelease amage IP68 NEM 6 Protection Hazardous
DRAW WIRE SENSOR. Series LX. Key-Features:
DRAW WIRE SENSOR Series LX Key-Features: Content: Technical Data...2 Electrical Connection...2 Technical Drawing...3 Accessories...4 Order Code...5 - Low cost series for use in dry environments - Available
Type SCH94FO. Type SCH94FO. Description
Type SCH94FO Hollow Shaft Fiber Optic Encoder - Ø 94 mm Dual Output Option (Digital & Fiber Optic) Fiber Optic Transmission up to 2,000 meters (~ 1.25 miles) No Degradation of Encoder Signal from Electrical
ENC - LKE51 - L I B
ENC-LKE51 Linear Magnetic Encoder FEATURES DESCRIPTION LKE51 ORDERING INFORMATION Resolutions: 5, 10, 25, and 50μm Linear Travel Speed: Up to 16m/s Standard Sensor for Linear and Rotary Axis Gap Clearance
Linear Probe Encoder Page 1 of 7. Description. Features
Page 1 of 7 Description The PE series linear plunger-style optical encoder has a machined aluminum enclosure. The PE provides either single-ended or differential quadrature encoder output in a convenient
EZ Encoder : Optical Incremental
1. Introduction The EZ25 Encoder is a 2.5 incremental optical encoder, designed for optical shaft encoder motion control and precision sensor systems. Our ET7272 available models are short circuit proof
Material: Weight: Bearing Life: Shaft Speed: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
Material: Weight: Shaft Speed: Starting Torque: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
ELECTRICAL. DATA AND INDEX Not all complements shown A shown for reference. Index A leads B, CW (from shaft end) TERMINAL CONNECTIONS COM VCC CASE
NorthStar brand SERIES HD35R Heavy Duty Encoder Key Features Phased Array Sensor for Reliable Signal Output Rugged Design with Wide-Spaced Oversized Bearings Unbreakable Code Disc up to 5000PPR Improved
Smart-Encoder : Optical Incremental
1. Introduction The Smart-Encoder effectively eliminates multiple encoder part numbers by bringing intelligence and security to its design. In seconds, a four-digit LED display with two push-buttons enables
Gurley Models LA18, LA20, LA25, High Resolution - Industrial Ruggedness
Gurley Models LA18, LA20, LA25, and LA35 Absolute Linear Encoders Motion Type: Linear Usage Grade: Industrial Output: absolute Max Resolution: 0.5 to 8µm High Resolution - Industrial Ruggedness ingenuity@work
Material: Weight: IP Rating: Cable: Connector:
Automation / Mini Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 6 mm Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution: Supply Voltage:
Draw Wire Sensor. Series HX
raw Wire ensor eries HX ey-eatures: ontent: Technical ata... Technical rawing... Options... Incremental... Tachometer... lectrical connection... Order ode... - Measurement ranges up to.8 m - istance measurement
Magnetic Sensor - Incremental EHP
small design: 12 x 13 x 35 mm stainless steel case resolution up to 0,5 μm; hysteresis ± 1μm pole pitch:1; 2 mm output signal: Digital (TTL-RS422) or analog (1 Vpp) direct connection to control / display
ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:
ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental
TECHNICAL MANUAL DRAW-WIRE DISPLACEMENT TRANSDUCER TYPE DWT
RDP Customer Document TECHNICAL MANUAL DRAW-WIRE DISPLACEMENT TRANSDUCER TYPE DWT Doc. Ref CD1004L BS EN ISO 9001 Certificate No. FM13141 Affirmed by Declaration of Conformity USA & Canada RDP Electrosense
Material: Weight: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry Type 2REX-H EN 60079 Electrical Specifications Code: Resolution: Supply Voltage: Voltage: Current: Incremental 1 to 10,000 ppr (pulses per revolution) 4.5 Vdc min. to 30 Vdc
Material: Weight: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry Type 2REX-H-SR EN 60079 Electrical Specifications Code: Resolution: Supply Voltage: Voltage: Current: Incremental 1 to 10,000 ppr (pulses per revolution) 4.5 Vdc min. to 30 Vdc
E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm
Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.
DATA AND INDEX Not all complements shown A shown for reference. Index A leads B, CW (from clamp end)
NorthStar brand HAZARDOUS SERIES HSD35 Key Features UL Certified for Hazardous Applications Rugged Design Resists up to 400g Shock and 20g Vibration Compact Design with Field Serviceable Connector for
EZ-LIGHT K30L Series With Independent Push Button Contact
EZ-LIGHT K0L Series With Independent Push Button Contact Datasheet Compact with One, Two, or Three s and a Momentary Push Button Output Rugged, cost-effective and easy-to-install multicolor indicator light
ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:
ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental
MODEL LDL-C Miniature Non-Contacting Linear Encoder Kit
MODEL LDL-C Miniature Non-Contacting Linear Encoder Kit Differential RS422 line driver output. Two count channels ( A & B ) wave in quadrature with compliments and index Low cost non-contacting linear
Index. Index. 1.0 Introduction...2 This Manual Operation Finger Lift Cable Lift Pneumatic Operation...
Li nearenc oder s wi t httlout put Us ermanual Index 1.0 Introduction..........................2 This Manual...........................2 2.0 Safety Summary......................3 Terms in this Manual....................3
Single Point Flow Monitor SW118 SW119
SW8 SW9 SW8 SW9 Single point flow monitors with MIN/MAX monitoring function, suitable for water, oil, air and media with similar thermal conductivities (selectable by means of a medium switch). With either
MODEL HS35 DRAWWORKS OPTICAL ENCODER
MODEL HS35 DRAWWORKS OPTICAL ENCODER Product Description This specially configured DrawWorks Model HS35 encoder combines rugged, heavy-duty features into a unique through-shaft style for use as a winchturns
Linear encoders without bearings incremental System for linear motion feedback
Features Robust magnetic sensing method Output signals A 90 B with index signal Output circuits: HTL/push-pull and TTL/RS422 Resolution up to 5 µm (4-times evaluation) Non-contact, wear-free sensing system
EZ Encoder : Optical Incremental (P Series)
1. Introduction Our EZ Encoders effectively eliminate multiple encoder part numbers by bringing intelligence and security to the design. A four-digit LED display with two push-buttons enables the user
HOG 86. The incremental HeavyDuty encoder for highest demands
HOG 86 The incremental HeavyDuty encoder for highest demands Extremely robust. Failsafe in any environment The solid, extremely sturdy housing with minimum 10 mm wall thickness is a prerequisite design
ENC-MC58SN-L R-L1
MC58/ MC59/ MC60 Hollow Shaft Magnetic Encoder Series FETURES DESCRIPTION Standard Encoder for Heavy Industrial pplications Hollow Shaft up to ø15mm 20 to 10,000 Cycles Per Revolution 80 to 40,000 Pulses
.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71.
Optical SERIES 61K High Resolution, 4-Pin FEATURES 25, 32, 50, 64, 100, 128 and 256 Cycles per Revolution Available Sealed Version Available Rugged Construction Cable or Pin Versions 10 Million Rotational
Absolute Rotary Encoder E6CP
Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the
Contactless Encoder Incremental: ppr RI360P0-QR24M0- INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
Clamps, mounting plate EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles
PRDS2 Magnetic Angle Encoder with Incremental Output Magnetic angle encoder 0-360 degrees in a flat housing with 36 mm dia. Measurement range 0 to 360 Protection class IP67 / IP69K Incremental encoder
SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR
SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR Description SE22HR is a very high performance hollow shaft encoder; a high resolution is achievable in a small space with a good performance/price
ENC-CK58SN-L R-L1
CK58/ CK59/ CK60 Blind Hollow Shaft Encoder Series FETURES Standard Encoder for Heavy Industrial pplications Blind Hollow Shaft up to ø15mm 2 to 10,000 Cycles Per Revolution 8 to 40,000 Pulses Per Revolution
Product Information. LS 1679 Incremental Linear Encoder with Integrated Roller Guide
Product Information LS 1679 Incremental Linear Encoder with Integrated Roller Guide February 2007 LS 1679 Incremental linear encoder for measuring steps to 5 µm or 1 µm Integrated wear-free roller guide
Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment.
Absolute 60-mm-dia. Rotary Encoder A High Accuracy and Durability for Automatic Equipment Stronger shaft and greater durability (120 N in the radial direction and 50 N in the thrust direction) than previous
EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features
Description Page 1 of 8 The EM1 is a transmissive optical encoder module designed to be an improved replacement for the HEDS-9000 series encoder module. This module is designed to detect rotary or linear
Proportional output thumbwheels - sprung to centre
New! HR series Distinctive features and specifications High reliability, long life HR-A-R Sealed to IP68 Backlighting option EMI/RFI shielding Other detent options on request Patented solution ENVIRONMENTAL
EZ-LIGHT K90FDL Daylight Visible
Datasheet Large one to five color daylight visible indicator with flashing input control Intense levels of light output for areas with high ambient light - even outdoors All models have flashing input
Rotative measurement Incremental rotary encoder Ri-10S10C-2B4096-H1181
Clamping flange, Ø 58 mm Solid shaft, Ø 10mm x 20mm Optical measuring principle Shaft material, stainless steel Protection class IP67 on the shaft side -40 +85 C Max. 6000 rev/min (continuous operation
DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
Contactless encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED LED indicates measuring range Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024,
SCALE & WEIGHT DISPLAYS
The MICRO SERIES SCALE & WEIGHT DISPLAYS LARGE DIGIT MODELS Mighty-5S DPM MODELS Micro-S & Mighty-1S Mighty-1S Micro-S ELECTRO-NUMERICS, INC. Introduction The Electro-Numerics family of Digital Panel Meters
Linear Array with Intensity Adjustment
Datasheet High-Power Lighting with Intensity Adjustment for use with Vision Systems For complete technical information about this product, including dimensions, accessories, and specifications, see www.bannerengineering.com/lineararraylights.
LD OEM/LD PDS/LD PeCo
LD OEM/LD PDS/LD PeCo Features LD OEM/PDS: 360 field of view LD OEM: the basic platform to LD PeCo: 90 field of view provide customized software 14,400 Hz scan rate programs on board and offers the Class
Absolute Encoders Multiturn
The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 4 mm and a blind hollow shaft
Precision Linear Motor / Stepper Motor Stage Reference Manual (Open and Closed Loop Versions)
PPS-20 Series Precision Linear Motor / Stepper Motor Stage (Open and Closed Loop Versions) PPS-20 Linear/Stepper Motor Positioner Stage Rev 3.06 MICRONIX USA, LLC 15375 Barranca Parkway, E-106 Irvine,
TPHADA TRANSMITTER FOR HIGH PRESSURE WITH DIGITAL AUTO-ZERO & SPAN
TPHADA TRANSMITTER FOR HIGH PRESSURE WITH DIGITAL AUTO-ZERO & SPAN Main features Ranges: from: 0...1000 to 0...5000 bar Output signal 4...20mA 2 wires / 0,1...5,1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that
Electrical connection
Color sensors Dimensioned drawing en 02-2013/01 50121262 068-14515 12mm 32mm 10-30 V DC 500 Hz Scanner for color detection Simultaneous selection of up to 3 colors Detection independent of distance Teach-in
Linear measuring technology
raw wire encoder 80 The draw wire mechanics 80 can be used up to a measuring length of 3 meters These draw wire mechanics may be combined with the proven Kübler Sendix encoders with incremental or absolute
www.mete-enerji.com.tr INDUSTIAL IEC PLUGS AND SOCKETS INDUSTIAL IEC PLUGS AND SOCKETS Position of the Earthing Contact acc. to IEC 60309-2 225/400-265/460 V~ 60 Hz (1) 3 P+N+ 3 P+ 2 P+ 120/208-144/250V~
LVDT. Inductive Position Transducer - Hydraulic Series. SM-HYD Hydraulic Series. Key-Features:
HM 1808 LVDT Inductive Position Transducer - Hydraulic Series SM-HYD Hydraulic Series Key-Features: Content: - Screw flange M18x1,5 / M30x1,5 or plug-in flange Ø18 - Pressure up to 400 bar - Measurement
EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features
Description Page 1 of 8 The EM1 is a transmissive optical encoder module. This module is designed to detect rotary or linear position when used together with a codewheel or linear strip. The EM1 consists
TEK-LCD 7801A. NEMA 4X Loop-Powered Feet and Inches Level Meter. ACCESSORIES. Technology Solutions
Technology Solutions TEK-LCD 7801A NEMA 4X Loop-Powered Feet and Inches Level Meter ACCESSORIES www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction The
RLC2IC component magnetic encoder with magnetic rings MR050C and MR047B
Issue 1, 29 th September 2014 RLC2IC component magnetic encoder with magnetic rings MR050C and MR047B RLC is a PCB level encoder for rotary measurements. With its compact design it is suitable for integration
WLC60 Heavy Duty LED Light - PWM Dimmable
WLC60 Heavy Duty LED Light - PWM Dimmable Datasheet Banner's WLC60 Heavy Duty Lights are engineered to withstand harsh environments, making it the first choice for a machine lighting solution. A conservative
Modular Lube Lubrication Systems System Controls
Model 84501 Program Timer Solid State Designed to control the lubrication cycle frequency of air-operated single-stroke pumps. Timer turns pump on/off at programmed intervals via a 3-way or 4-way air solenoid
MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT)
MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT) TECHNICAL DATA Measurement taken Position read sampling time (typical) Shock test DIN IEC68T2-27 Vibrations DIN
DMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0,35 % FSO. Nominal pressure
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0,5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
MAGNETIC TAPE. Series MB. incremental scale. Key-Features:
MAGNETIC TAPE incremental scale Series MB Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...3 Installation Instruction...3 Digital Displays...4 Order Code...5 - Available
MODEL ED32i TTL LINEAR ENCODER
Reliable non-contact measurement Can be used for rotary as well as linear measurements Differential 5V TTL A/B-Quadrature output Error detection like out of range or missing scale Programmable reference
TECHNICAL DATASHEET Absolute Encoder AC 58 - SSI-P
n n n n n Compact design: 59 mm mounting depth for single or multiturn Aids for start up and operation: diagnostic LED, preset key with optical response Parameterization: Resolution, code type, direction,
Micro-Machined Silicon Transducers
Micro-Machined Silicon Transducers wet/wet differential Pressure Models mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-25 mbar to 0-70 bar PXM409 Differential Series Standard
technical data (according to IEC ) Degree of protection IP 67 Max. ripple content 15 % U B / 20 % U B (amplifier) No-load supply current
Inductive Sensors: high-temperature ü For ambient temperatures of up to +230 C ü With integrated electronics, up to +180 C ü With external electronics, up to +230 C ü Excellent long-term reliability (according
Smart encoders & actuators
Smart encoders & actuators? Draw wire units 2014 ROTAPULS Incremental rotary encoders ROTACOD Absolute rotary & Fieldbus encoders ROTAMAG Rotary Magnetic encoder & Encoder modules LINEPULS LINECOD Linear
Speed sensor MiniCoder GEL 2471
Speed sensor MiniCoder GEL 2471 for electrically conducting toothed-wheels Technical information version 10.02 The MiniCoder family from Lenord + Bauer offers spacesaving solutions for the contactless
Model # of Colors Colors Input Connection 1 K90TLGRPQ 2 Green, Red K90TLGYRPQ 3 Green, Red, Yellow K90TLBGYRPQ 4 Blue, Green, Yellow, Red
Datasheet Large Multicolor that Alternates Between Active Inputs Bright, uniform indicator light Alternates between colors when multiple inputs are active Models are available with up to five colors in
DRAW WIRE SENSOR. Series MH120 for mobile hydraulics applications. Key-Features:
DRAW WIRE SENSOR Series MH120 for mobile hydraulics applications Key-Features: Content: Introduction...2 Technical data...3 Analog outputs...3 Digital output CANopen...4 Electrical connection...4 Technical
Absolute encoders multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANopenift interface and optical sensor technology are the right encoders for all CANopen or CANopenift applications. With a maximum resolution
1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Color Mark Color Mark Feature Outstanding color matching accuracy - RGB light emitting diodes and 12-bit resolution - 2 detection modes (color only / color + intensity) - -step sensitivity adjustment for
EZ-LIGHT S18L General Purpose Indicators Controlled Access, Inc. orders this part as S18DLGRYPQ
EZ-LIGHT S8L General Purpose Indicators ontrolled ccess, Inc. orders this part as S8DLGRYPQ Datasheet D-Operated LED Indicators with One, Two, or Three olors Up to three independent colors in one unit
Nikon s DigiMicro Position Encoders Nanometer Resolution with Sub-Micron Accuracy
Nikon s DigiMicro Position Encoders Nanometer Resolution with Sub-Micron Accuracy Available in North America through NanoWave, Inc. The DigiMicro product line from Nikon is a family of optically-based
Temposonics. Magnetostrictive Position Sensors. L Series (Model LH) to G-Series Linear-Position Sensor. Cross Reference A
Temposonics Magnetostrictive Position Sensors L Series (Model LH) to G-Series Linear-Position Sensor 550956 A Cross Reference Replacement and retrofit options for the L-Series Model LH sensor L-Series
Inductive linear position sensor LI300P0-Q25LM0-LIU5X3-H1151
Rectangular, aluminium / plastic Versatile mounting possibilities LED indicates measuring range Immune to electromagnetic interferences Extremely short blind zones 12 bit resolution 4-wire, 15 30 VDC Analog
Contactless Encoder IO-Link Ri360P0-QR24M0-IOLX2-H1141
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 16 bits singleturn Process value in 32 bit telegram 3 error bits 16 bits singleturn 15
Product Information. RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads
Product Information RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads May 2014 RIQ 425 Absolute rotary encoders Synchro flange 01C Solid shaft for separate shaft
Metric Series. PXM409 Differential Series. mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-25 mbar to 0-70 bar
Micro-Machined Silicon Transducers wet/dry differential mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-25 mbar to 0-70 bar PXM409 Differential Series U 5-Point NIST Traceable
Sentronic PLUS Electronic Pressure Regulator. Installation Manual
Sentronic PLUS Electronic Pressure Regulator Installation Manual Sentronic PLUS ASCO NUMATICS Sentronic PLUS Electronic Pressure Regulator Electrical Characteristics * Max. ripple: 10 % Specifications
Sensor technologies Distance measuring sensors Series SM6. Brochure
Series SM6 Brochure Series SM6 6 mm groove with cable without wire end ferrule, tin-plated, -pin with distance measuring sensor, measurement range - 56 mm 6 mm groove with cable Plug, M8x, -pin, with knurled
Contactless Encoder Analog RI360P0-QR24M0-ELIU5X2-H1151
Compact, rugged housing Many mounting possibilities Status displayed via LED Measuring range indicated via LED Immune to electromagnetic interference Measuring range programmable via Easy Teach Output
Sentronic PLUS. Electronic Pressure Regulator. Installation Manual
Sentronic PLUS Electronic Pressure Regulator Electronic Pressure Regulator Sentronic PLUS Sentronic PLUS Electronic Pressure Regulator General Electrical Characteristics Nominal Diameter DN (mm) Voltage
EM1. Transmissive Optical Encoder Module Page 1 of 9. Description. Features
Description Page 1 of 9 The EM1 is a transmissive optical encoder module designed to be an improved replacement for the HEDS-9000 series encoder module. This module is designed to detect rotary or linear
CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions
CSM Color sensors Color sensors for the detection of a single color in restricted space conditions Due to its compact design, the CSM can be used in the most confined of spaces. The choice of color tolerance
DRAW WIRE SENSOR. Series SX50. Key-Features:
DRAW WIRE SENSOR Series SX50 Key-Features: Content: Introduction...2 Technical Data Analog...3 Technical Data Incremental...4 Technical Data Digital WCAN...5 Technical Data Digital CAN, SSI...6 Technical
Inductive sensor With analog output BI15-M30-LI-EXI
ATEX category II 1 G, Ex-zone 0 ATEX category II 2 D, Ex-zone 21 Threaded barrel, M30 x 1.5 Chrome-plated brass 2-wire, 14 30 VDC Analog output 4 20 ma Cable connection Wiring Diagram Type designation
SERIES 400 SERIES 620
x 0. 0... PUR cable type,000 Hz SERIES 00 SERIES 0 0,000 Hz Table Diagram ---.... 9 VDC /. ma** PUR cable type / Connector S,000 Hz 0,000 Hz Table Diagram ---.... 9 VDC /. ma** PUR cable type,000 Hz x
Wall-/Pipe-Mount Level Indicator
Data Sheet SS/_4 Wall-/Pipe-Mount Level Indicator High visibility 5-digit LED display clear multi-functional indication Analog and 2-relay outputs as standard high, low, latch and rate alarms, plus isolated
DS 210. Electronic Pressure Switch. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure
Without Media Isolation accuracy according to IEC 60770: 0. % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Contacts, or independent contacts freely configurable Analogue output wire:... 0
IK10 IP68. Specifications. White (4 300 K typical) Warm white (3 000 K typical) Blue (470 nm) Other colors by request
1300 Industrial Road, Unit #19 San Carlos, CA 94070 FREE CALL 1-866-695-5862 US & Canada info@lumascape.com LS553LED Via Ingrade IP68 IK10 The LS553LED is a rugged, side emitting marker light constructed
EZ-LIGHT K50 Beacon. Datasheet. Models
Datasheet Daylight-Visible, General-Purpose Indicators for Indoor or Outdoor Use To view or download the latest technical information about this product, including specifications, dimensions, accessories,
DATA SHEET Panorama Rudder Indicator, TRI-2
DATA SHEET Panorama Rudder Indicator, TRI-2 Class 1 accuracy on CAN version Readable from up to 5 metres Single and dual CAN or analogue interface LED illumination DEIF A/S Frisenborgvej 33 DK-7800 Skive
DMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter Nominal pressure from 0... 6 bar up to 0... 600 bar Output
SERIES x5. Nickel-plated brass Connection 1) PUR cable type 1 Degree of protection. IP 67 Mounting. Embeddable Max. switching frequency
1 Size SERIES 400 x SERIES x Operating distance mm 0.8 0.8 1. Housing material Connection 1) PUR cable type 1 PUR cable type 1 / Connector S8 PUR cable type 1 Degree of protection Mounting Max. switching
MAGNETOSTICTIVE TRANSDUCER
MGNETOSTICTIVE TRNSDUCER MZ Series Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...5 Order Code...7 Options & ccessories...8 - vailable measurement ranges 50 to