Series HSW and HSWM SPST & SPDT PIN Switches
|
|
|
- Emery Farmer
- 5 years ago
- Views:
Transcription
1 Description The HSW and HSWM series of broadband PIN Diode switches cover frequency ranges from 18 to 65+ GHz. The HSW switches utilize a low loss finline structure with silicon or GaAs beam lead diodes, while the HSWM switches utilize GaAs MMIC switches in a microstrip configuration with launch to either 2.9/2.4 connectors or waveguide. Superior performance in a compact size is featured in these designs. Gold plated housings are used to achieve maximum performance and reliability. Applications Attenuators AM Modulators General RF Switching Receiver Protection Integrated Systems Features Switching Options Driver Options Compact Design Low Loss High
2 SPST Switches RF Interface Insertion Loss (db) (db) Switching Speed (ns) HSW4201-XXX WR-42 Full HSW4203-XXX WR-42 Full HSWM4201/ mm female Full HSW2801-XXX WR-28 Full HSW2803-XXX WR-28 Full HSWM2801/ mm female Full HSWM WR-15 4 GHz Note: XXX Implies part numbers assigned to customer specific frequency ranges
3 SPDT Switches ( mw Power Handling) RF Interface Insertion Loss db db Switching Speed (ns) HSWM4201/ mm female Full HSW22801-XXX WR-28, UG-599/U 10 GHz HSWM2801/ mm female Full HSWM22801/ female Full SPDT Switches (10W Power Handling) RF Interface Insertion Loss db db Switching Speed (ns) 1,4 HSWM WR-28, UG-599/U Full HSWM22801/ mm female Full Note: XXX Implies part numbers assigned to customer specific frequency ranges
4 General Specifications Power Handling VSWR Driver Delay, TTL Driver Spec compliant to +20 dbm Operates to +23 dbm without damage 10 watt 26.5 to 40.0 GHz SPDT models are available 2.0:1 (typ) 25 ns typical Notes 1. Other on/off ratios, drivers, and switching speed options available. 2. Other flange options available. 3. Operating temperature 0 to C. 4. Specifications shown are for reflective switches. Contact factory for available non-reflective switch configurations.
5 Requesting quotes When requesting a quote for HSW and HSWM PIN Switches, please specify required frequency range, isolation level and any other required specifications. HSW and HSWM switches are built to order and will be optimized for the bandwidth specified by the customer. The HSW and HSWM part number guides below can also be used as a reference for requesting quotes. HSW / XXX Assigned by factory Option: Add flange # for non-standard flange Attenuation Option (See table below) Band (WR #) Number of switch arms: Use 2 for SPDT, leave blank for SPST HXI Model # HSW On/Off Ratio and Driver Options Option # Insertion Loss / Logic States 01 Standard Unit (low loss) Logic 1 = Low Loss State 02 Standard Unit (low loss) Logic 1 = State 03 High Logic 1 = Low Loss State 04 High Logic 1 = State HSWM / XXX Assigned by factory Option: Add flange # for non-standard flange Option: Add 2.4 or 2.9 for coaxial connectors Attenuation Option (See table below) Band (WR #) Number of switch arms: Use 2 for SPDT, leave blank for SPST HXI Model #
GaAs MMIC Double Balanced Mixer
Page 1 The is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation
GaAs MMIC Double Balanced Mixer
Page 1 The is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation and spurious
Parabolic. Click Part Number for Datasheet. 25 ± 1 dbi 32.5 ± 1 dbi. GHz GHz GHz 32dBi
Parabolic Click Part Number for Datasheet Part Number Description Frequency band Gain Polarization Dimension Antenna type Page MA-WP2556- DP12 Band Polarization Parabolic Reflector, 1.2m 2.4-2.7 GHz 5.0-6.0
4400X Series. Orbital. X-Band Ext Ref LNB. MIL Spec MIL-STD A, 45 db internal filter LNB630S-500X-WN60-G12. Orbital Features: Orbital Specs:
Orbital 4400X Series X-Band Ext Ref LNB 4400X Series, X-Band Ext Ref LNB with Universal 12-hole gasket input isolator. MIL Spec MIL-STD-188-164A, 45 db internal filter How to order an Orbital 4400X Series
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Clarke & Severn Electronics Ph + Email sales@clarke.com.au www.cseonline.com.au RF-LAMBDA LEADER OF RF BROADBAND SOLTIONS RFSPTA0GSB SB Control Absorptive Coaxial SPT Switch - GHz Electrical Specifications,
Orbital 4400X & 4400XI Series X-Band Ext Ref LNB
Orbital 4400X & 4400XI Series X-Band Ext Ref LNB 4400XI Series, X-Band Ext Ref LNB with Universal 12-hole gasket input isolator MIL Spec MIL-STD-188-164A, 45 db internal filter How to order an Orbital
GaAs DOUBLE-BALANCED MIXER
MM167LS The MM167LS is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation
Features. Gain Variation Over Temperature db/ C
v4.3 MODULE,. - 5 GHz Features Typical Applications The Wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Gain:
GaAs MMIC Double Balanced Mixer
Page 1 The is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor. Accurate,
Features. = +25 C, IF= 100 MHz, LO = +17 dbm*
v2.31 HMC-C44 1-23 GHz Typical Applications The HMC-C44 is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Features Wide
CMD179C GHz Fundamental Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description The CMD179C3 is a general purpose
CMD180C GHz Fundamental Mixer. Features. Functional Block Diagram. Description
CMD18C3 2-32 GHz Fundamental Mixer Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description
CMD183C GHz I/Q Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High isolation Image rejection: 26 db Wide IF bandwidth Pb-free RoHs compliant 4x4 mm SMT package Description The CMD183C4 is a compact I/Q mixer in
Parameter Input Output Min Typ Max Diode Option (GHz) (GHz) Input drive level (dbm)
MMD3H The MMD3H is a passive double balanced MMIC doubler covering 1 to 3 GHz on the output. It features excellent conversion loss, superior isolations and harmonic suppressions across a broad bandwidth,
MILLIMETER WAVE VNA MODULE BROCHURE
MILLIMETER WAVE VNA MODULE BROCHURE General Information OML, founded in 1991, is an expert at millimeter wave (mm-wave) measurements. Our successful foundation is built on mm-wave S-parameter measurements,
MICROLITHIC DOUBLE-BALANCED I/Q MIXER
MLIQ18 The MLIQ18 is a miniaturized, multi-octave 2-18 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either up
Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units
Features Passive: No DC Bias Required Input IP3: +2 dbm LO/RF Isolation: 3 db Wide IF Bandwidth: DC - 8 GHz Typical Applications The is ideal for: Telecom Infrastructure Military Radio, Radar & ECM Space
MICROLITHIC DOUBLE-BALANCED MIXER
Page 1 The is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
GaAs DOUBLE-BALANCED MIXER
MM1-124S The MM1-124S is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form
GaAs MMIC Double Balanced Mixer
Page 1 The is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor. Low
Parameter Min. Typ. Max. Units. Frequency Range 5 20 GHz. Minimum Insertion Loss db. Dynamic 5 GHz 23 db
5-2 GHz GaAs MMIC EWA21ZZ September 29 Rev 3 Features Broadband Performance: 5 to 2 GHz Dynamic Range: 23 db, typical Input IP3: + 21 dbm, typical (any attenuation) Dual Voltage Control: -1.5 to V ESD
GaAs MMIC Double Balanced Mixer
Page 1 The is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor. Low
GaAs DOUBLE-BALANCED MIXER
The MM1-312S is a high linearity passive double balanced MMIC mixer. The S diode offers superior 1 db compression, two tone intermodulation performance, and spurious suppression to other GaAs MMIC mixers.
GaAs DOUBLE-BALANCED MIXER
MM1-3H The MM1-3H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
CMD178C GHz Fundamental Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description The CMD178C3 is a general purpose
MICROLITHIC DOUBLE-BALANCED I/Q MIXER
MLIQ-416 The MLIQ-416 is a miniaturized, multi-octave 4-16 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either
Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units
Typical Applications The is ideal for: Telecom Infrastructure Military Radio, Radar & ECM Space Systems Test Instrumentation Functional Diagram Features Wide IF Bandwidth: DC - 13 GHz Passive: No DC Bias
GaAs DOUBLE-BALANCED MIXER
MM1-185H The MM1-185H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form
MICROLITHIC DOUBLE-BALANCED MIXER
ML1-185 The ML1-185 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
Parameter Input Output Min Typ Max Diode Option (GHz) (GHz) Input drive level (dbm)
MMD3HSM The MMD3HSM is a passive double balanced MMIC doubler covering to 3 GHz on the output. It features excellent conversion loss, superior isolations and harmonic suppressions across a broad bandwidth,
MICROLITHIC DOUBLE-BALANCED I/Q MIXER
The is a miniaturized, multi-octave 185 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either up or downconversion.
CMD255C GHz High IP3 Fundamental Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High IP3 High isolation Wide IF bandwidth Pb-free RoHs compliant 3x3 mm SMT package Description The CMD255C3 is a general purpose double balanced mixer
Features. = +25 C, IF= 100 MHz, LO= +13 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units
Features Passive Double Balanced Topology High LO/RF Isolation: 48 db Low Conversion Loss: 7 db Wide IF Bandwidth: DC - GHz Robust 1,000V esd, Class 1C Typical Applications The is ideal for: Point-to-Point
INTEGRATED ASSEMBLIES MICROWAVE SOLUTIONS FROM TELEDYNE COUGAR
INTEGRATED ASSEMBLIES MICROWAVE SOLUTIONS FROM TELEDYNE COUGAR INTEGRATED ASSEMBLIES MICROWAVE SOLUTIONS FROM TELEDYNE COUGAR Teledyne Cougar offers full first-level integration capabilities, providing
GaAs MMIC High Dynamic Range Mixer
Page 1 MT3-113HCQG The MT3-113HCQG is a triple balanced passive diode GaAs MMIC mixer offering high dynamic range, low conversion loss, and excellent repeatability. As with all T3 mixers, this mixer offers
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
LEADER OF RF BROADBAND SOLTIONS Clarke & Severn Electronics Ph + Email sales@clarke.com.au www.clarke.com.au RFSPTA000GSB Absorptive Coaxial SPT Switch 0. - 0GHz Electrical Specifications, TA = + C, SB
TGL2210-SM_EVB GHz 100 Watt VPIN Limiter. Product Overview. Key Features. Applications. Functional Block Diagram. Ordering Information
.5 6 GHz Watt VPIN Limiter Product Overview The Qorvo is a high-power receive protection circuit (limiter) operating from.5-6ghz. Capable of withstanding up to W incident power levels, the allows < dbm
SR1320AD DC TO 20GHZ GAAS SP3T SWITCH
FEATURES: Low Insertion Loss: 1.6dB at 20GHz High Isolation: 42dB at 20GHz Excellent Return Loss 19ns Switching Speed GaAs phemt Technology PACKAGE - BARE DIE, 1.91MM X 2.11MM X 0.10MM 100% RoHS Compliant
-Preliminary- Ku-band PLL LNB - Internal Reference (L.O. Stability: ±1 ppm) - MODEL No. NJR2835U/36U/37U/39U series
-Preliminary- Ku-band PLL LNB - Internal Reference (L.O. Stability: ±1 ppm) - MODEL No. NJR2835U/36U/37U/39U series < Features > * Low Noise Figure Noise Figure: 0.8 db * Low DC Current Drain DC Current
Parameter Symbol Units MIN MAX. RF Input Power (CW) Pin dbm +20. LO Input Power (CW) Pin dbm +27
AMT-X0103 6 GHz to 10 GHz RF/LO IMAGE REJECT MIXER Data Sheet Features RF/LO Frequency Range 6 to 10 GHz Image Rejection 30 db Typical Typical Conversion loss 6 db LO-RF Isolation 36 db LO-IF Isolation
HMC-C078. SDLVAs. Features. Typical Applications. General Description. Functional Diagram
HMC-C8 v. MODULE w/ LIMITED RF OUTPUT, - GHz Typical Applications The HMC-C8 is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control
MPI Cable Selection Guide
MPI Cable Selection Guide MPI engineers focus to provide on optimal cable solutions taking into account a number of requirements specific for wafer-level measurement systems: optimal cable length, cable
Product Introduction. Duplexer Box MN2555A. Signal Analyzer MS2830A. Ver.1.0
Product Introduction Duplexer Box MN2555A Signal Analyzer MS2830A Ver.1.0 Duplexer Box MN2555A Duplexer Box MN2555A Connecting MN2555A, Signal Analyzer MS2830A, and USB Power Sensor *The shape of the accessory
MICROLITHIC DOUBLE-BALANCED MIXER
M1-638 The M1-638 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
MICROLITHIC DOUBLE-BALANCED MIXER
ML1-936 The ML1-936 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
v SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) 1-20 GHz Features Parameter Conditions Typ. Units Input Frequency Range 1-20 GHz
HMC-C88 v.6 - GHz Features to GHz Operation Typical Applications The HMC-C88 is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control
Parameter LO RF IF Min Typ Max Diode Option (GHz) (GHz) (GHz) LO drive level (dbm)
MM-726HSM The MM-726HSM is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation
Test Systems. Typical JFW Systems. Matrix switches Programmable assemblies Switch assemblies Manual attenuator assemblies Power divider assemblies
Test Systems This section of our catalog showcases some standard JFW test systems. However, we understand that everyone s system requirements are unique. For this reason, we can design a system to suit
Silicon Double Balanced HMIC TM Mixer, MHz V2
Silicon Double Balanced HMIC TM Mixer, 3500 4500 MHz MA4EXP400H1277T Features + 24 dbm Typical Input IP3 7.7 db Typical Conversion Loss + 13 to + 19 dbm LO Drive Fully Balanced Passive Mixer NO External
CMD257C GHz High IP3 I/Q Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High IP3 Image rejection: 3 db Wide IF bandwidth Pb-free RoHs compliant 4x4 mm SMT package Description The is a high IP3 I/Q mixer in a leadless surface
CMD195. DC-20 GHz SPDT Non-reflective Switch. Features. Functional Block Diagram. Description
Features Positive gain slope High isolation Fast switching speed Non-reflective design Small die size Functional Block Diagram B A 3 4 5 2 RFC A B 6 Description The is a broadband nonreflective GaAs MMIC
MICROLITHIC DOUBLE-BALANCED MIXER
ML1-15 The ML1-15 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
MICROLITHIC DOUBLE-BALANCED MIXER
ML15 The ML15 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
14 GHz, 2.2 kw KLYSTRON GENERATOR GKP 22KP 14GHz WR62 3x400V
14 GHz, 2.2 kw KLYSTRON GENERATOR GKP 22KP 14GHz WR62 3x400V With its characteristics of power stability independent of the load, very fast response time when pulsed (via external modulated signal), low
1.5 GHz to 4.5 GHz, GaAs, MMIC, Double Balanced Mixer HMC213BMS8E
FEATURES Passive: no dc bias required Conversion loss: 1 db typical Input IP3: 21 dbm typical RoHS compliant, ultraminiature package: 8-lead MSOP APPLICATIONS Base stations Personal Computer Memory Card
FMMX9004 DATA SHEET. Field Replaceable SMA IQ Mixer From 15 GHz to 23 GHz With an IF Range From DC to 3.5 GHz And LO Power of +17 dbm.
FMMX94 Field Replaceable SMA IQ Mixer From 15 GHz to 23 GHz With an IF Range From DC to 3.5 GHz And LO Power of +17 dbm FMMX94 is an I/Q double balanced millimeter-wave mixer module that operates across
Features. = +25 C, IF = 1 GHz, LO = +13 dbm*
v.5 HMC56LM3 SMT MIXER, 24-4 GHz Typical Applications Features The HMC56LM3 is ideal for: Test Equipment & Sensors Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Functional Diagram
18 GHz, 2.2 kw KLYSTRON GENERATOR GKP 24KP 18GHz WR62 3x400V
18 GHz, 2.2 kw KLYSTRON GENERATOR GKP 24KP 18GHz WR62 3x400V With its characteristics of power stability whatever the load, very fast response time when pulsed (via external modulated signal), low ripple,
FMMX9002 DATA SHEET. Field Replaceable SMA IQ Mixer From 8.5 GHz to 13.5 GHz With an IF Range From DC to 2 GHz And LO Power of +19 dbm.
FMMX92 Field Replaceable SMA IQ Mixer From 8.5 GHz to 13.5 GHz With an IF Range From DC to 2 GHz And LO Power of +19 dbm FMMX92 is an I/Q double balanced millimeter-wave mixer module that operates across
SATCOM FIBER OPTIC PRODUCTS
INDOOR APPLICATIONS ONE THIRD RACK SATCOM FIBER OPTIC PRODUCTS CARD CAGE RACK OUTDOOR APPLICATIONS DC-POWERED L-BAND C-BAND LNA TABLE OF CONTENTS INDOOR EQUIPMENT Page One third rack links 2 One third
MICROLITHIC DOUBLE-BALANCED MIXER
ML1-11SM The ML1-11SM is a Surface Mount Microlithic double balanced mixer. As with all Microlithic mixers, it features excellent conversion loss, isolation, and spurious performance across a broad bandwidth
GaAs MMIC Double Balanced Mixer. Description Package Green Status
GaAs MMIC Double Balanced Mixer MM132HSM 1. Device Overview 1.1 General Description The MM132HSM is a GaAs MMIC double balanced mixer that is optimized for high frequency applications. MM1-832HSM is a
Synthesized Block Up- and Downconverter
Visit us at www.w ork-microw ave.de Synthesized Block Up- and Downconverter S, C, X, Ku, K, The satellite up- and downconverters developed and manufactured by WORK Microwave are designed to meet the requirements
HIGH-LINEARITY TRIPLE-BALANCED MIXERS T3-0838
HIGH-LINEARITY TRIPLE-BALANCED MIXERS T3-838 The T3-838 is a high performance mixer featuring LO/RF from 8 to 38 GHz and IF from MHz to GHz. As with all T3 mixers, this mixer offers unparalleled nonlinear
GaAs MMIC High Dynamic Range Mixer
Page 1 The is a triple balanced passive diode mixer offering high dynamic range, low conversion loss, and excellent repeatability. As with all T3 mixers, this mixer offers unparalleled nonlinear performance
CMD197C GHz Distributed Driver Amplifier
Features Functional Block Diagram Wide bandwidth High linearity Single positive supply voltage On chip bias choke Pb-free RoHs compliant 4x4 mm SMT package Description The CMD197C4 is a wideband GaAs MMIC
Synthesized Block Up- and Downconverter Indoor / Outdoor
Visit us at www.work-microwave.de Synthesized Block Up- and Downconverter Single / Dual / Triple Band Single / Dual Channel S-, C-, Ku-, K (DBS)-, Ka- and Q-band WORK Microwave s synthesized block converters
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES SGRF300 SGRF300D SGRF300DD SGRF303 SGRF303D SGRF303DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil
MICROLITHIC DOUBLE-BALANCED MIXER
ML1-11SM The ML1-11SM is a Surface Mount Microlithic double balanced mixer. As with all Microlithic mixers, it features excellent conversion loss, isolation, and spurious performance across a broad bandwidth
CMD176P GHz 4-Bit Digital Phase Shifter. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low phase error Low insertion loss 36 phase shift, LSB = 22.5 Single bit positive logic Pb-free RoHs compliant 4x4 QFN package Description The CMD176P4 is a GaAs MMIC
11 GHz MDD FIBER OPTIC LINK FEATURES TYPICAL APPLICATIONS
11 GHz MDD FIBER OPTIC LINK FEATURES Small size Bandwidth to 11 GHz Plug-in optical connector No external control circuits required Transimpedance amplifier in both transmitter and receiver Custom transmitter
GaAs MMIC Triple Balanced Mixer
Page 1 The is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. GaAs MMIC technology improves upon the previous
Parameter Min. Typ. Max. Min. Typ. Max. Units
Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features db Conversion Gain Image Rejection:
FMMX9000 DATA SHEET. Field Replaceable SMA IQ Mixer From 4 GHz to 8.5 GHz With an IF Range From DC to 3.5 GHz And LO Power of +15 dbm.
FMMX9 Field Replaceable SMA IQ Mixer From 4 GHz to 8.5 GHz With an IF Range From DC to 3.5 GHz And LO Power of +15 dbm FMMX9 is an I/Q double balanced millimeter-wave mixer module that operates across
RF2360 LINEAR GENERAL PURPOSE AMPLIFIER
Linear General Purpose Amplifier RF2360 LINEAR GENERAL PURPOSE AMPLIFIER RoHS Compliant & Pb-Free Product Package Style: Standard Batwing Features 5MHz to 1500MHz Operation Internally Matched Input and
6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A
FEATURES Conversion loss: 9 db typical Local oscillator (LO) to radio frequency (RF) isolation: 37 db typical LO to intermediate frequency (IF) isolation: 37 db typical RF to IF isolation: db typical Input
15-32 GHz GaAs MMIC Voltage Variable Attenuator EWA4001YB. Voltage Variable Attenuator - Packaged. Device Photo. Features.
- Packaged EWA41YB February 211 Rev 1 Features Broadband Performance: to 32 GHz Dynamic Range: 2 db @ 23 GHz, typical Input IP3: +21 dbm, typical Dual Voltage Control: -1. to V ESD Protection Bias Circuitry
GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A
FEATURES Conversion loss: db LO to RF isolation: db LO to IF isolation: 3 db Input third-order intercept (IP3): 1 dbm Input second-order intercept (IP2): dbm LO port return loss: dbm RF port return loss:
= +25 C, IF= 100 MHz, LO = +17 dbm*
v3.514 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Wide IF Bandwidth: DC - 3.5
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.55 Typical Applications The is
MAXTECH, Inc. BRC-1000 Series. C-Band Redundant LNB Systems. Technology for Communications. System Block Diagrams
MAXTECH, Inc. Technology for Communications BRC-1000 Series C-Band Redundant LNB Systems Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic
OPTICAL DISTRIBUTION STATION -
optical distribution station is a high performance, four individual outputs node. With high output levels and performance to 862MHz, it provides an ideal platform for support of the evolving technologies
HMC613LC4B POWER DETECTORS - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz
v.54 HMC6LC4B AMPLIFIER (SDLVA),. - GHz Typical Applications The HMC6LC4B is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control Circuits
Parameter Min Typ Max Units Frequency Range, RF
Features Low conversion loss High isolation Ultra wide IF bandwidth Passive double balanced topology Small die size Description The is a general purpose double balanced mixer die with ultra wide IF bandwidth
MICROLITHIC DOUBLE-BALANCED MIXER
M1 The M1 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth and
10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B
Data Sheet FEATURES Passive; no dc bias required Conversion loss 8 db typical for 1 GHz to 18 GHz 9 db typical for 18 GHz to 26 GHz LO to RF isolation: 4 db Input IP3: 19 dbm typical for 18 GHz to 26 GHz
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.514 MIXER, 5.5-14. GHz Typical
Emcore SITU2831 Externally Modulated RF Amplified Fiber Optic Transmitter and SIRU3000 Fiber Optic Receiver
PRELIMINARY Applications RF and microwave antenna signal distribution EW Systems Broadband delay-line and signal processing systems Frequency distribution systems Radar system calibration Phased array
Orbital Ka-ISO. Ext Ref Ka LNB with integrated isolator. Orbital Research Ltd Marine Drive, White Rock, BC. Canada V4B 1A9
Orbital Ka-ISO Ext Ref Ka LNB with integrated isolator Orbital Research Ltd 14239 Marine Drive, White Rock, BC. Canada V4B 1A9 Part number generator Frequencies (GHz): LO Input Output Bandwidth 18.40F
FOM-9010, FOM-9011 and FOM-9012
Control and Alarm Voltage sense, open collector, or contact inputs Features: FOM-00: Voltage Sense, Open Collector, or Dry Contact Inputs. State Detection for TIA-, TIA-, and TTL Signals. FOM-0: SPDT Form
DOUBLE-BALANCED MIXERS M1-0008
DOUBLE-BALANCED MIXERS M-8 Features LO/RF. to 8. GHz IF DC to. GHz 7. db Typical Conversion Loss Ultra-Broadband RF, LO, and IF Electrical Specifications - Specifications guaranteed from - to + C, measured
Product Operation Manual
Product Operation Manual VL-FTX FORWARD TRANSMITTER MODULE Ver 1.1(Doc#01-02-008) VALE SYSTEMS INC. 10400 Overland Road #408 Boise, ID 83709-1449,USA Tel: 208.935.6317Fax: 208.935.6234 All rights reserved
Features OBSOLETE. = +25 C, As an IRM. IF = MHz. Frequency Range, RF GHz. Frequency Range, LO
v.17 Typical Applications The is ideal for: Microwave Radio & VSAT Test Instrumentation Military Radios Radar & ECM Space Functional Diagram Electrical Specifications, T A = +25 C, As an IRM Parameter
= +25 C, IF= 100 MHz, LO = +15 dbm*
v4.514 HMC62LC4 Typical Applications The HMC62LC4 is ideal for: Point-to-Point Point-to-Multi-Point Radio WiMAX & Fixed Wireless VSAT Functional Diagram Features General Description Electrical Specifications,
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.514 MIXER, 2.5-7. GHz Typical
HMC576LC3B MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications
v2.514 Typical Applications The is suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram Features
R&S ZVA-Zxx Millimeter-Wave Converters Specifications
ZVA-Zxx_dat-sw_en_5214.2033.22_umschlag.indd 1 Data Sheet 13.00 Test & Measurement R&S ZVA-Zxx Millimeter-Wave Converters Specifications 28.01.2013 15:08:06 CONTENTS General information... 3 Definitions...
40-Gb/s Limiting Amplifier Model 1424
USER S GUIDE 40-Gb/s Limiting Amplifier Model 1424 2584 Junction Ave. San Jose, CA 95134-1902 USA phone: (408) 919-1500 e-mail: contact@newfocus.com www.newfocus.com Warranty New Focus, Inc. guarantees
SWITCHING SYSTEMS CAPABILITY GUIDE ELECTROMECHANICAL MATRIX SOLID STATE MATRIX PXI MODULES FULL INTEGRATED SYSTEMS FIBER OPTICAL SYSTEMS
SWITCHING SYSTEMS CAPABILITY GUIDE ELECTROMECHANICAL MATRIX SOLID STATE MATRIX PXI MODULES FULL INTEGRATED SYSTEMS FIBER OPTICAL SYSTEMS OUR EXPERIENCE, YOUR SWITCH SOLUTION SINCE 1945 EXPERIENCE. Custom
= +25 C, IF= 100 MHz, LO = +15 dbm*
v3.514 Typical Applications Features The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Digital Radio VSAT Functional Diagram Wide IF Bandwidth: DC - 3.5 GHz Image Rejection: 35 db LO to RF