HDC Data sheet and Instruction Manual V DVB S2 Tuner / 2 ASI-IN / IP-IN to 16 DVB-C & IP out
|
|
- Delphia Davidson
- 6 years ago
- Views:
Transcription
1 HDC DVB S2 Tuner / 2 ASI-IN / IP-IN to 16 DVB-C & IP out Data sheet and Instruction Manual V / 29
2 Table of content: TABLE OF CONTENT:... 1 INTRODUCTION:... 2 FEATURES:... 2 TECHNİCAL DATA:... 3 LET'S START WITH THE WEB-INTERFACE:... 4 NETWORK SETTINGS:... 4 SAFE & RESTORE, BACKUP & LOAD CONFIGS:... 5 LOGFILES:... 7 FIRMWARE UPGRADE:... 8 USERNAME/PASSWORD CHANGING:... 8 TUNER CONFIGURATION DVB S/S2:... 9 CREATE 16X QAM-CHANNELS: SCRAMBLING: FINAL DVB-C QAM SETUP READY: IMPORTANT NOTES! CONTACT: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 1
3 Introduction: The BLANKOM HDC-7016 is a high performance and cost-effective QAM modulator. It has 16 DVB-S/S2 FTA (Free to Air unencrypted) tuner inputs, 16 groups of multiplexing, with 16 groups CA scrambling capabilities, 16 RF-output channels DVB-C QAM modulating and supports a maximum of 512 IP-Stream inputs through Gigabit Ethernet port. Modulating to 16 non-adjacent DVB-C QAM carriers (50MHz...960MHz) output through the RF output interface. To meet customers various requirements, this device is also equipped with 2 ASI input ports which selected services can be mixed (remultiplexed) to the output channels. The BLANKOM HDC-7016 is also characterized with an high integration level, high performance and very cost effective. This is very adaptable to new generations of CATV headend systems i.e. in hospitality environments. Features: 16 Channel DVB-C (QAM) Headend System 16 DVB-S/S2 tuner inputs for 16 FTA satellite transponders 512 IPTV inputs (UDP, RTP) 2 ASI inputs 16 groups multiplexing +16 groups CA scrambling 16 groups QAM modulating Excellent RF output performance index, MER 40 db Accurate PCR adjusting; PSI/SI editing and inserting Web management, Updates via web DiSEqC 1.0 LNB control for up to 4 satellites Dual power supply (optional) Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 2
4 Technical Data: Function 16 channel DVB-C Headend with Satellite, IPTV and ASI input 16 DVB-S/S2 FTA Tuner INPUT 512 IPTV channels over UDP and RTP protocol 2 ASI input, BNC interface OUTPUT 16 DVB-C groups which can be multiplexed from any combination of input channels 16 DVB-S/S2 tuners with input frequency range: MHz Tuner section Symbol rate: Signal strength: dBm 2-45 MSps (supports SCPC and MCPC) QPSK, 8PSK; supporting DiSEqC 1.0 LNB control for up to 8 satellites Multiplexing 16 multiplexers, Maximum PID remapping: 128 per input channel PID remapping (automatically or manually), Accurate PCR adjusting, Generate PSI/SI table automatically Max simulcrypt CA: 4 Scrambling Scramble Standard: ETR289, ETSI , ETSI Local/remote connection 16 DVB-C (QAM) channels, Standard EN /ITU-T J.83A/B RF frequency 50~960 MHz, 1 khz step Modulation RF output level 87~107 dbµv, 0.1 db step Constellation 16/32/64/128/256QAM MPTS / SPTS over UDP, 10/100/1000 Base-T Ethernet interface (UDP unicast / multicast) SYSTEM Control Remote management Web NMS( 10M/100M) GENERAL Dimensions Power Temperature 482mm 300mm 44.5mm, 19 1U, 3.7 kg AC 110V±10%,50/60Hz or AC 220V±10%, 50/60Hz, 25 W, dual power supply optional 0 45 C (operation), C (storage) Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 3
5 Let's start with the Web-Interface: The user can control and set the configuration of the device with any computer by connecting to the webserver by the 100BaseT NMS Port. The user should ensure that the computer s IP address is different from other device s IP address; otherwise, it might cause an IP conflict. Default Login-Data on (default factory address) are admin/admin: Note: We recommend using the newest version of the browser Firefox. Network settings: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 4
6 We assume that the user is familiar with IP settings and already knows his own system to connect the unit to. If you use the Output Streaming feature: We recommend using 2 separate Switches! At least a 100BaseT for the Management NMS RJ45 port and a second one with Gigabit Ethernet 10/100/1000BaseT with at least Layer 2+ with IGMP V2 features. Otherwise you might flood your IP-Streaming network with unnecessary Data, which might overload connected IPTV STB's because they almost have only 100BaseT capacity (Never ones use 1GbE ports) but too many inputs into a STB can result in side effects. If you need to select a Switch, we recommend HP Procurve G or 48G which are cost effective, easy to configure, can be trunked and supporting IGMP V2. If the switch needs routing functions, the bigger brother of this series might be the right choice. Because to not accidently put DATA and NMS port in the same sub-network the data port setting does not allow this by default. Usually the DATA GbE Port needs an IP address- otherwise the Switch or the receivers (i.e. IPTV STB's) cannot locate the source of the streams. APPLY and better to Safe & restore, Backup & load configs: We highly recommend to safe the configuration to be able to restore it at all time just in case the unit was accidently w/o power or any other interruptions happened. This method is only temporary so we recommend to use the Backup and Load function instead: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 5
7 Safe/Store the config.bin file on your local PC. Restoring this config: Select the file and start the upload: than LOAD config Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 6
8 confirm it please Remark: Time & Date Settings like in our other units is actually not implemented. So the unit currently acquires this information from your logged in browser/pc settings. Future releases may enable these settings. Logfiles: Kernel Log and System Log can be reviewed and exported for service issues just in case. Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 7
9 Firmware upgrade: Self explaining Username/Password changing: The default username / PW can be changed to your needs. Please make sure you do not lose it or a complete factory Reset (Front panel RESET button) must be initiated. And the configuration would get lost -> Backup Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 8
10 Tuner configuration DVB S/S2: We start this configuration with an Example by combining Inputs and even loop some out- to next In-puts. We recommend not using this method, because the extra attenuation of the LOOP-OUT Ports may cause a too weak Signal-Input to the next RF-IN as shown here. We will setup here 2 Satellites as an Example: ASTRA 19 EAST (SAT Pos. 1) and Hotbird 13 EAST (SAT Pos.2). Input: 1 st RF IN is directly connected to the Multiswitch, 2 nd looped from the first and so on until port 8: But that s way too much attenuation from loop to next RF IN: If you setup the 6 th Input, 5 th is toggling off and on again because they are losing the signal. And anyway if you chose to use them also in Loop-connected mode, only one of the inputs should serve the Multiswitch with 13VDC(Vertical) or 18VDC (Horizontal) and 22KHz (High Band) signal should be only sent by one port if you are using a Splitter for several ports to be combined. Otherwise, if every RF-IN port has a direct connection to a SAT-Matrix or Multiswitch, each parameter needs to be setup accordingly for every single port. Connected Ports 9-16 with an external active SAT Splitter 1 to 8 to the Multiswitch. Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 9
11 Now we check Sat-Pos. 2 = Hotbird 13 East by DiSEqC: Assure before, that all 13/18V settings from tuner the splitter are off: and DiSEqC is set to the same sattelite: e Voila: Now better to change the first 8 inputs and use a 1:8 active splitter with DC Pass (sourced from the H/V- DC supplied to the coax-cable): Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 10
12 and 9-10 keeping as it was for Hotbird: Signal quality of 1 8 are much better now. Now that we have setup 16 SAT-Inputs, I have additional connected the 2x ASI ports from an external source to the unit: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 11
13 Now we parse the inputs to collect each TS data: If the parsing wasn't sufficient, maybe increase the time-out value for the demultiplexer to 100s or more depending on how many information might be detectable but 60 sec are usually OK. With press the "+" you can add Channels from the Gigabit input: we have TS2/3 from the external source on: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 12
14 So importing them now, SET IGMP to V2 or V3 please (depending on your GbE Switch you are using, this makes a lot of sense). We recommend to use HP G or 48G- sufficient, easy to operate and not that expensive like Cisco. Do not mess-up with just IGMP Snooping in very cheap Layer 2 Switches. You need full IGMP-Support V2/3 as at least Layer 2+ Switches, better Layer 3. Otherwise, you are passing the streams to all ports even if they don't want them. Imagine: with 2 MPTS streams each has approximately 50 Mb/s = 100 Mb/s in total, every connected device with a 'only' fast Ethernet 100 BaseT - like Management ports will be flooded with unwanted data and maybe not reachable any more. Parse program and here we go: next Stream: Remarkable. Now we need to select and create Output Transport streams: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 13
15 Passing all of Input 1to out TS1: isn't that simple? Just some hints: If the content is FTA not encrypted and no CI-Flag set in the TS, you can skip set the CA-Filter: and PID remapping is often not necessary. Maybe only to avoid collisions in a multiplex from different sources but that later get more info's: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 14
16 the PSI-SI multiplexer already assigns LCN's to the NIT which is Logical Channel Number Sorting for your TV/STB if it supports LCN's. These can be re-numbered in a later step manually. compare it: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 15
17 Change single output TS values by clicking right the service opens a popup: Another hint: we have some space left in this stream: because I previous have set the output QAM-channel to 256QAM / 6900 SR, let's check this for the others as well, to not underestimate the QAM Datarates because DVB-S2 transponders can carry more than a QAM Channel can carry: General Settings for all is recommended first Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 16
18 we DVB-C Annex A/C not using J83B (ITU) Annex B which is used in US and Korea Lets test the GAP: changed to start all from 666MHz and used the first on reducing 8MHz, so we will get a GAP in the bandwidth: Also this is possible: Adjusted an 8MHZ at the end of the 15 th channel. Result: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 17
19 So now we are able to Create 16x QAM-Channels: almost with Free to Air TV and Radio Services: As you can see, the almost max. data rate in a QAM-DVB-C Annex A/C channel is: 50.9 Mb/s. Because TV services usually do not use constant bitrates (see Sports, they increase bitrates per service) We need to consider an average overhead of 10-15%: % = 43 Mb/s and we would be safe. Back to TS CONFIG-Menu: This might be irritating because in the GE1-Stream Input, all are encrypted except: HSE24 HD, and 1-2-3TV HD and QVC PlusHD. So we add one of these to TS1: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 18
20 Looks promising: So we see, we have 8Mbit space to less for another HD channel Now checking the CA-Filter feature: and whoops, the CA-PIDs are gone great!!!: Next step: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 19
21 That setting with Mux needs to be done if the output QAM exists by mixing different sources. The DVB-Tables need to be re-created. Useful for passing In to Out Tuner to QAM Here is the possibility shown to create the NIT according to your setup manually: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 20
22 Otherwise an external PSI editor can be used and the NIT-file uploaded to the unit. Disadvantage: If you change something, you need to create/correct and upload that again. PID bypass can be used if some selective particular Input PID need to be passed to the QAM channel. now we wanne pass just an input to the output : Repeat these steps for every output STREAM: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 21
23 no CA filter necessary, neither PID remapping. The easiest way to do DVB-S(2) into QAM : Setting up all 16 QAM channels and lets tune the TV Just passing in to output : Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 22
24 If you are muxing with IP MPTS Inputs, you have to start "+" action for every TS In to out again : Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 23
25 and first use the tuner services, than the IP ones Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 24
26 Scrambling: Select which and what to encrypt and connect the unit to the IP-Address of the CA-Server. The values need to be set according to that system. Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 25
27 Final DVB-C QAM Setup ready: Anyway, we should adjust the QAM Channels according to the ITU Cenelec Channel line ups, so that TV sets can easier tune by using the default channel lists: Example starting with That s enough for 16 channels. Please note: Remultiplexing would destroy EPG data from the original source. This cost effective Receiver / multiplexer / scrambler / modulator does not support EIT remultiplexing. Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 26
28 Important Notes! This manual is for use by qualified personnel only. Handling this device or system requires special electronic technical knowledge. To reduce the risk of electrical shock or damage to the equipment, do not perform any servicing other than the installation and operating instructions contained in this manual unless you are qualified to do so. This device operates in the given voltage and frequency range without requiring manual adjustment. Do not open the top case w/o unplugged power source because serious injury or death may be the result! Inside are components under risk from electrostatic discharge. To avoid equipment damages do not touch these components or, observe the respective handling rules! For continued protection against fire, the fuses may only be replaced by identical fuses with the same electrical specifications which are designed for the corresponding fuse positions. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation or adaptation) without the written permission from Blankom / IRENIS GmbH. IRENIS GmbH reserves the right to revise this publication and make changes in its content from time to time, whereby it shall not be obligatory for IRENIS GmbH to provide notification of such revision or change. IRENIS GmbH provides this manual without warranty of any kind, neither implied nor expressed, this includes also any warranties regarding the merchantability and fitness for a particular purpose. IRENIS GmbH may improve this manual or make changes in the products described herein at any point of time. Installation Notes All types of the IRENIS-BLANKOM family are 19 devices with 1 RU height designed for installation in 19 racks. In addition to the front panel screws an internal module support is required at the rack. Depending on the Frontend used and the operating adjustments, the RF-input port carries DC Voltage (13V /18V, max. 400 ma). By connecting a mains cable, the device can become functional without any auxiliary appliances. The power supply units are designed for the wide range of V AC; a manual adjustment of the voltage is not necessary. For some models the second power connector is feeding another independent power supply for internal redundancy. For a maximum of redundancy both power supplies should use different circuits. All the outputs are decoupled from one another. Thus, the circuit does not have any effect on the functioning of the device. Connections that are not required need not to be terminated. Suggestion: CAT 6E Ethernet cable for GbEthernet Note: IPv4 global scope sessions use multicast addresses in the range with SAP Announcements being sent to Port 9875 (note that is used by the obsolete SAPv0 and MUST NOT be used). IPv4 administrative scope sessions using administratively scoped IP multicast. The multicast address to be used for announcements is the highest multicast address in the relevant administrative scope zone. For example, if the scope range is , then is used for SAP Announcements. Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 27
29 Contact: IRENIS GmbH Owiesenkehre 1 D Hamburg - Germany Managing Director: Dipl.Ing. Riccardo Rossini Commercial Register: HRB / District Court Hamburg Web: info@blankom.de Irenis-Direct Phone: Technical Hotline: Filename: BlankomHDC-7016-Manual V1.1-RR.docx Page 28
HDC DVB-C Headend Transmodulator with Satellite and IP Stream Input
DVB-C Headend Transmodulator with Satellite and IP Stream Input 4 Channel DVB-C (QAM) Headend System 12 DVB-S/S2 tuner inputs for 12 FTA satellite transponders 128 IPTV inputs (UDP, RTP, MPTS & SPTS) 4
HDC 6008CI. DVB-C Headend with Satellite and IPTV Input
DVB-C Headend with Satellite and IPTV Input 4 Channel DVB-C (QAM) Headend System 8 DVB-S/S2 tuner inputs for up to 8 FTA and 4 scrambled satellite transponders 128 IPTV inputs (UDP, RTP) 4 groups multiplexing
IP MUX Scrambling QAM Modulator NDS3332. Product Overview. Key Features
NDS3332 IP MUX Scrambling QAM Modulator Product Overview NDS3332 IP Mux-Scrambling modulator is the latest generational Mux-scrambling-modulating all-in-one device developed by DEXIN. It has 32 multiplexing
T3316 IP QAM Modulator User Manual
T3316 IP QAM Modulator User Manual SW Version: 1.02 HW version: 0.70.0.0 Web NMS version: 1.02 Intended Audience About This Manual This user manual has been written to help people who have to use, to integrate
DVB-C RF out front panel
www.transliteglobal.com 1 DVB-T RF out front panel DVB-C RF out front panel DVB-C Tuner in RF out & RF test port FE in port GE in & out port WEB port 4HDMI IN Power supply 8HDMI IN 12 HDMI IN www.transliteglobal.com
DHP 400A. Product Outline. Key Fetures. DHP 400A Head-end Processor
DHP 400A Product Outline Redundancy Power Supply (optional) DHP400A DTV head-end processor is the new generation of intelligent headend processing equipment. This 1-U case comes with 6 independent module
Professional 4-Channel DVB Receiver and Transmodulator Item: 5213
IDLV-3440DM Professional 4-Channel DVB Receiver and Transmodulator Item: 5213 IDLV-3440DM integrates 4 DVB Receiver and Transmodulator in one 1U 19 chassis. It provides operators an ideal DTV headend setup
12 HDMI 16* DVB-C/8*DVB-T/6*ISDB-T Digital RF
NDS3544M Encoder Modulator 12 HDMI 16* DVB-C/8*DVB-T/6*ISDB-T Digital RF Product Overview NDS3544M HD encoder modulator is a professional high integration device which includes encoding, multiplexing,
DX3316 IP QAM Modulator User Manual
DX3316 IP QAM Modulator User Manual SW Version: 1.02 HW version: 0.70.0.0 Web NMS version: 1.02 DEXIN DIGITAL TECHNOLOGY 20142014 CORP. LTD. Intended Audience About This Manual This user manual has been
Encoder Modulator NDS3544I. Product Overview
NDS3544I Encoder Modulator & RF test port GE output port Tuner in GE input port WEB port 24 HDMI IN Power supply Product Overview NDS3544I is a professional high integration device which includes encoding,
About IPTV. The Headend is the key > the network -> middleware > SetTopBox -> TV. Ralf Riedel
About IPTV The Headend is the key > the network -> middleware > SetTopBox -> TV Ralf Riedel 25.03.2014 So first of all, if you want to migrate to IPTV systems, you need to know some basics about the Transmission
TL-4459C ENCODER MODULATOR
& RF test port GE output port Tuner in GE input port WEB port 24 HDMI IN Power supply Product Overview TL-4459C is a professional high integration device which includes encoding, multiplexing, scrambling
Z-IP Stream 004/008. User Guide and Installation Manual. Four or Eight Input QAM Encoder / Modulator
Z-IP Stream 004/008 User Guide and Installation Manual Four or Eight Input QAM Encoder / Modulator MPEG-2 / H.264 HD ENCODER with QAM /IP/ & ASI Outputs Contents Safety Precautions... 3 Package Contents...
AQ1016 IP MUX Scrambling QAM Modulator. Quick Reference Guide. Revision A
AQ1016 IP MUX Scrambling QAM Modulator Quick Reference Guide Revision A ACT AQ1016 1 RU Quick Reference Guide ACT Document Number: ACT AQ1016 Quick Reference Guide User Guide Revision A Copyright 2016
Operation and Installation Guide
Operation and Installation Guide HDS2800 Series Encoder Modulator High Definition (HD) Digital COFDM MPEG2 and H.264 Modulator with IP Multicast. 19 Rack Mount Revision 4.0 Firmware version Released File
Digital Tuner Streamer
Digital Tuner Streamer This Manual Apply to the MTRX 4/8 Tuner To IPTV Systems On 8 Tuners Systems, The inputs are all assigned to the 8 Tuners Only and no asi Web-NMS Version: 1.03 Software: 1.00 Hardware:
AMD-53-C TWIN MODULATOR / MULTIPLEXER AMD-53-C DVB-C MODULATOR / MULTIPLEXER INSTRUCTION MANUAL
AMD-53-C DVB-C MODULATOR / MULTIPLEXER INSTRUCTION MANUAL HEADEND SYSTEM H.264 TRANSCODING_DVB-S2/CABLE/_TROPHY HEADEND is the most convient and versatile for digital multichannel satellite&cable solution.
16 channels transmodulator S2C16
16 channels transmodulator S2C16 Vers. 1.01 USER S MANUAL S2C16 - SAT to QAM transmodulator 1. Product description S2C16 is a 16 channel transmodulator with DVB-S/S2 input and DVB-C output. It has 4 main
Professional Headend Solutions. A-LINE series featuring MPEG Encoder, Multiplexer, Scrambler, Modulators, and IP Streamers
19 PREMIUM HEADEND EMA 207 MXA 107 SCA 107 AMA 299 VMA 191 MSA 108 S/T/C/A 4-way MPEG-Encoder/Multiplexer 8-way Multiplexer DVB Scrambler QAM Modulator Audio/Video Modulator Twin DVB to IP Streamer A-LINE
for Cable TV and IPTV networks
3.1 B-Nova 3.1 DXP 400 Compact & Modular Headend Platform for Cable TV and IPTV networks The B-NOVA Chassis is a base for an IPTV modular platform and cable TV headends. B-NOVA enables the operator to
Operation and Installation Guide
Operation and Installation Guide HDS2800 Series Encoder Modulator High Definition (HD) Digital COFDM MPEG2 and H.264 Modulator with IP Multicast. 19 Rack Mount Wall Mount Revision 0.1 Firmware version
QAM MODULATOR CI. 4 x DVB-S/S2/T/T2/C+CI 4 x DVB-T/C + IP. Operation Manual
QAM MODULATOR CI 4 x DVB-S/S2/T/T2/C+CI 4 x DVB-T/C + IP Operation Manual 1 1. IMPORTANT SAFETY PRECAUTIONS INFORMATION READ THE FOLLOWING WARNINGS BEFORE YOU USE YOUR DEVICE WARNING The following safety
CRT1041M-C-IP Datasheet. Datasheet. 4-channel Edge QAM Modulator.
4-channel Edge QAM Modulator Table of contents 1 General information...3 1.1 Description...3 1.2 Technical Specifications...3 2 Physical description...4 2.1 Front View...4 2.2 Rear View...4 3 Functional
TV4U QUAD DVB-S2 to DVB-C TRANSMODULATOR
INSTRUCTION MANUAL Features of the new DVB-C transmodulators line Through the use of the FPGA technology the transmodulators provides the highest performance at the lowest price. Four carriers are formed
User Manual. UNIVERSE Ref. 8600
User Manual UNIVERSE Ref. 8600 No part of this manual may be copied, reproduced, transmitted, transcribed or translated into any language without permission. Unitron reserves the right to change the specifications
IxStream Headend. Quick Guide - Begin working with the IxStream headend. IX-Streamer, rev 1.1
IxStream Headend Quick Guide - Begin working with the IxStream headend IX-Streamer, rev 1.1 Introduction... 3 Example setup... 3 Access the headend... 4 Important Concepts... 5 Push Config... 5 EMM...
Thor Broadcast SDI-DVBT-IP & SDI-DVBT-IPLL Product Lines
700-1200 ms 1080p60 70-125 ms (LL) H-4SDI-DVBT-IP H-4SDI-DVBT-IP 4x HD-SDI 1080p60 700-1200 ms 70-125 ms (LL) Data Sheet: H-1/4SDI-DVBT-IP User s Manual: H-1/4SDI-DVBT-IP Thor Broadcast SDI-DVBT-IP & SDI-DVBT-IPLL
HD4112 Quad HDMI MPEG2 HD DVBT Encoder Modulator U S E R M A N U A L
HD4112 Quad HDMI MPEG2 HD DVBT Encoder Modulator U S E R M A N U A L HD4112 Manual Rev 1 Contents 1. GENERAL 1.1 Description 1.2 Specifications 2. INSTALLATION 2.1 What s in the Box 2.2 Connection 2.2.1
DVB IP CONVERTER FOR IPTV HEADENDS with INTEGRATED RECEIVER & DECODER & REMUXER
DVB IP CONVERTER FOR IPTV HEADENDS with INTEGRATED RECEIVER & DECODER & REMUXER PRODUCT DESCRIPTION The DMM-151 is a high-density, cost-effective modular DVB to IP gateway system and DVB streamer for IPTV
Continuum DVP D9600 Advanced Headend Processor Model D9655 IP Streamer with optional built-in scrambler
Headend Systems Continuum DVP D9600 Advanced Headend Processor Description Today s digital systems demand powerful, flexible and compact solutions. The Model D9655 IP Streamer with built-in scrambler,
The first TV Smart Headend designed for Hospitality SOLUTIONS FOR IN-ROOM ENTERTAINMENT PROVIDERS AND INTEGRATORS
The first TV Smart Headend designed for Hospitality SOLUTIONS FOR IN-ROOM ENTERTAINMENT PROVIDERS AND INTEGRATORS 1 FLOW IN...3 FLOW SEC...4 FLOW ENC...5 FLOW OUT...6 FLOW HUB...7 FLOW BASE...8 FLOW PSU...9
4IN1 IP QAM Modulator USER S MANUAL
4IN1 IP QAM Modulator USER S MANUAL Catalog 1. SAFETY INSTRUCTION... 1 2. SYSTEM DIAGRAM AND WORK PRINCIPLE... 1 2.1 SYSTEM DIAGRAM... 1 2.2 WORKING PRINCIPLE... 2 3 FEATURE... 3 4 SPECIFICATIONS... 4
User manual Transmodulators. Ref. 5103S/5103T/5103Q/5130
User manual Transmodulators Ref. 5103S/5103T/5103Q/5130 Contents 1 Introduction 2 1.1 The ProQuad range................................ 2 1.2 Modular system solution.............................. 4 1.3
User Manual. UNIVERSE Ref. 8600
User Manual UNIVERSE Ref. 8600 No part of this manual may be copied, reproduced, transmitted, transcribed or translated into any language without permission. Unitron reserves the right to change the specifications
8-Way Professional Demodulator & IPTV Streamer
8-Way Professional Demodulator & IPTV Streamer Model: Main Feature: 8 DVB-S2/S, DVB-C, DVB-T2/T or DTMB or ATSC or ISDB-T Tuner Inputs Tuner RSSI, received signal strength, Eb/N0, C/N and BER monitoring
USER MANUAL FOR THE REMOTE CONTROL (NEW version)
USER MANUAL FOR THE REMOTE CONTROL (NEW version) 2 Versions are existing: One with (left picture) and one w/o TV code learning (right pic). We always deploy the version with learning TV control code capabilities.
DRD 700. Quad Multistream Processor. Instruction Manual
DRD 700 Quad Multistream Processor Instruction Manual Blankom Digital GmbH TecCenter 31162 Bad Salzdetfurth Germany Phone +49 (0) 5063 / 2711-0 Fax +49 (0) 5063 / 2711-60 E-Mail info@blankom-digital.de
B-QAM-SDI-IP-2CH-LL User Manual
User Manual Directory CHAPTER 1 INTRODUCTION... 1 1.1 PRODUCT OVERVIEW... 1 1.2 KEY FEATURES... 1 1.3 SPECIFICATIONS... 2 1.4 PRINCIPLE CHART... 3 1.5 APPEARANCE AND DESCRIPTION... 3 CHAPTER 2 INSTALLATION
User Manual. UNIVERSE Ref SW Release
User Manual UNIVERSE Ref. 8600 SW 1.3.0.Release No part of this manual may be copied, reproduced, transmitted, transcribed or translated into any language without permission. Unitron reserves the right
DXI-800 DVB-S/S2/T to IP streamer User Manual
DXI-800 DVB-S/S2/T to IP streamer User Manual 1. Purpose of use DXI-800 is HD compatible IP streamer designed for a processing satellite and terrestrial signals to data broadcast (IP) connected to Ethernet.
DVB IP CONVERTER FOR IPTV HEADENDS with INTEGRATED RECEIVER & DECODER & REMUXER
DVB IP CONVERTER FOR IPTV HEADENDS with INTEGRATED RECEIVER & DECODER & REMUXER PRODUCT DESCRIPTION The DMM-151/152 is a high-density, cost-effective modular DVB to IP gateway system and DVB streamer for
CompactMax-2 DVB-S/S2 TO DVB-T2 TRANSMODULATOR - 0 MI2100 -
CompactMax-2 DVB-S/S2 TO DVB-T2 TRANSMODULATOR - 0 MI2100 - SAFETY NOTES Read the user s manual before using the equipment, mainly "SAFETY RULES" paragraph. The symbol on the equipment means "SEE USER
PD1600. Satellite Gateways. Media Distribution. Headend in a Box. Applications. Features
Satellite Gateways Media Distribution Headend in a Box (front view) ATX s is an ultra-compact headend in a box for the secure delivery of cable, satellite & IPTV content to MDUs, headend in the sky (HITS)
DRD 696. Multi-Format Receiver. Instruction Manual
Multi-Format Receiver Instruction Manual DRD 696 Blankom Digital GmbH TecCenter 31162 Bad Salzdetfurth Germany Phone +49 (0) 5063 / 2711-0 Fax +49 (0) 5063 / 2711-60 E-Mail info@blankom-digital.de Web
Product Introduction. Key Features
NDS356xH HD IRD Product Introduction NDS356xH HD IRD is DEXIN s all-in-one device which integrates demodulation, de-scrambler, re-mux and decoding in one case to convert RF signals into audio/video (CVBS
SAT IF distribution system
7. Technical specifications Type cs43 RF input frequency range pr. 50-350 MHz inputs number 4 level pr. 55...88 dbµv 60...93 dbµv symbol rate 3 45 Ms/s return loss/impedance > 0 db/75 Ω LNB powering/control
SD4650 DVB-T HD MODULATOR. User Manual
SD4650 DVB-T HD MODULATOR User Manual 0 TABLE OF CONTENT 1 GENERAL...2 1.1 Description...2 1.2 Specifications...3 2 INSTALLATION...4 2.1 What s in the Box...4 One power cable...4 2.2 Connection...4 2.2.1
HD-1603 Single Input MPEG-4 DVB-T HD Encoder/Modulator User Guide and Install Manual
ZyCastR digi-mod HD Range digi-mod HD-1603 www.digi-modbyzycast.com HD-1603 Single Input MPEG-4 DVB-T HD Encoder/Modulator User Guide and Install Manual Table of Contents www.digi-modbyzycast.com Safety
Television on IP Networks. SNS-101 (Ref. 5101) FTA or Multicrypt DVB-S IP Streamer Common Interface. Configuration and Settings.
Television on IP Networks SNS-101 (Ref. 5101) FTA or Multicrypt DVB-S IP Streamer Common Interface Configuration and Settings User Manual EN Configuration and Setting of the SNS-101 Streamer Module User
Simple Media Platform Quick Installation Guide V1.0-N. Simple Media Platform. Quick Installation Guide
Simple Media Platform Quick Installation Guide 1. Installation Instruction 1.1 Mounting unit to a 19 rack When selecting the installation site, try to comply with the following: Protective Ground - The
Application examples. 2 Tel. +49 (0)7081 / Fax +49 (0)7081 / Office buildings. Cruise ships. Hotels.
IP Streamer POLYTRON IP streamer The transmission of TV channels via digital data networks (IPTV) is getting more and more important. The headend PCU 4131 converts the received DVB signals into IPTV signals
CompactMax-4 DVB-S/S2 TO ISDB-T TRANSMODULATOR - 0 MI2101 -
CompactMax-4 DVB-S/S2 TO ISDB-T TRANSMODULATOR - 0 MI2101 - SAFETY NOTES Read the user s manual before using the equipment, mainly "SAFETY RULES" paragraph. The symbol on the equipment means "SEE USER
PREMIUM HEADEND SYSTEM
B-LINE NEW modules for processing of 8PSK/QPSK, COFDM, QAM, ASI, Analog TV and Audio/Video signals Modular Headend system featuring Hot Swap technology and automatic power supply redundancy Frequency a
Contents. SAT IF distribution system
Contents SAT IF distribution system 5 cable dscr system Cascadable single cable multiswitches 2-4 Single cable adaptor/multiswitch 5 Multiswitch programmer 6 Splitband amplifier 7 System accessories 8
Cisco D9859 Advanced Receiver Transcoder
Deliver MPEG-4 high-definition (HD) services to MPEG-2 cable TV (CATV) headends with the Cisco D9859 Advanced Receiver Transcoder. The Cisco D9859 platform (Figures 1 and 2) extends the distribution options
Digital Compact Headends
Johansson introduces the range of Digital Compact Headends, known as Colosseum. Already shortly after their introduction in Germany, these compact TV distribution stations were recommended by several magazines
World Class Modular MPEG-4 Digital Headend. 10 IRD 7U Rack can deliver up to 150 Channels (FTA + PAY) 56 FTA with 2 Gigabit 5U Rack (300~600 channels)
Product Briefs 10 IRD Rack can deliver (FTA + PAY) We use Professional Digital Satellite receivers with ASI and input and output interfaces which offers real time professional receive, demodulation, and
Cisco D9859 Advanced Receiver Transcoder
Data Sheet Cisco D9859 Advanced Receiver Transcoder Deliver MPEG-4 high-definition (HD) services to MPEG-2 cable TV (CATV) headends with the Cisco D9859 Advanced Receiver Transcoder. The Cisco D9859 platform
S7000L. TV & Satellite Analyzer. All IN ONE. Satellite & Terrestrial. Key Features. Model Guide
S7000 TV & Satellite Analyzer Key Features All standards in one: QAM(J.83A/B/C), 8VSB, DVB-T/H/T2, DVB-S/ S2 Digital/Analog TV and Satellite TV analysis MPEG2 Transport stream analyzer and monitoring via
AVE HOME FAGOR CVBS TO DVB-T ENCODER MODULATOR. Fagor Electr6nica
AVE HOME CVBS TO DVB-T ENCODER MODULATOR FAGOR Fagor Electr6nica TABLE OF CONTENTS 1. SPECIFICATIONS... 12 1.1 Product Overview... 12 1.2 Appearance and Description... 12 1.3 Diagram... 13 1.4 Characteristics...
NDS3542 Encoder Modulator Low Delay
NDS3542 Encoder Modulator 2*SDI/HDMI 2* DVB-T Carriers Out Low Delay Front View Rear View SDI Input Rear View HDMI Input Key Features MPEG2 HD & MPEG4 AVC/H.264 HD video encoding Up to 1920*1080@50P/60P
TV4U DVB-S2 to DVB-S2 TRANSMODULATOR
TV4U to TRANSMODULATOR TV4U to TRANSMODULATOR INSTRUTION MANUAL TV4U to TRANSMODULATOR The main application of to transmodulator Experience of MVDS terrestrial broadcasting shows that carrier must be restored
It receives contents from 4 DVB-T/T2, DVB-S/S2 or DVB-C transponders/muxes and broadcasts them in 4 DVB-T, DVB-C or IP output channels.
+ HTI HEADEND It receives contents from DVB-T/T, DVB-S/S or DVB-C transponders/muxes and broadcasts them in DVB-T, DVB-C or IP output channels. Quad universal tuner Output DVB-T or DVB-C selectable channels
Broadcast Satellite Modulator
M6100 Modulator Broadcast Satellite Modulator The M6100 Broadcast Satellite Modulator is the latest generation satellite modulator built from the ground up for contribution, distribution and direct-to-home
CM 3S-TC. Triple Transmodulator 8PSK-COFDM/QAM. User manual
CM 3S-TC 082016 Triple Transmodulator 8PSK-COFDM/QAM User manual 1 1. Accessories... 1 2. General Description... 2 3. Installing and connections... 4 3.1. Installing and general connections... 4 3.2. Installation
AES/EOU R-AUDIO2 R-AUDIO1 L-AUDIO1 L-AUDIO2 CVBS CVBS OUT R-AUDIO1 R-AUDIO2 ASI OUT2 GPI/LS DATA
160R-Base R-AUDIO1 R-AUDIO2 AES/EOU ASI OUT RF OUT RF IN L-AUDIO1 L-AUDIO2 CVBS ASI IN GPI/LS DATA 160R-AD GPI/LS DATA CVBS OUT R-AUDIO1 R-AUDIO2 ASI OUT2 ASI IN2 RF OUT2 RF IN2 RF OUT1 RF IN1 Introduction
user manual Colosseum 8500D
user manual Colosseum 8500D No part of this manual may be copied, reproduced, transmitted, transcribed or translated into any language without permission. Unitron reserves the right to change the specifications
The new standard for customer entertainment
The new standard for customer entertainment TDH 800 headend system your ultimate connection 2 TRIAX TDH 800 New standard for headend systems The TDH 800 is a headend system designed to provide cost effective
The new standard for customer entertainment
The new standard for customer entertainment TDH 800 basic headend system your ultimate connection 2 TRIAX TDH 800 New standard for basic headend systems The TDH 800 is a basic headend system designed to
DCP Internet DCP-1000AV SDI/HDMI/AES & XLR
Digital TV Equipment System Digital Contents Processing Platform DCP-1000 brings a compact flexible solutions that allow the users to build or update the DTV or IPTV headend to meet a variety of requirements
CRT1041M-C-02 CRT1041M-C-02 DATASHEET DATASHEET. 4-channel DVB-C modulator
DATASHEET DATASHEET CRT1041M-C-02 4-channel DVB-C modulator Crypton October, 2013 Contents 1. Overview...3 2. Features... 4 3. General description... 5 4. Functional block diagram... 6 5. Technical specification...
User guide. IP output module - Art. No A
User guide IP output module - Art. No. 492072 891080A GB Contents Contents Disposal... 3 Box content... 3 IP output module... 3 Labels... 4 Installation of IP modules... 5 Installation of extender boards...
HD168Bi Quad CVBS/HDMI HD DVBT Encoder Modulator U S E R M A N U A L
HD168Bi Quad CVBS/HDMI HD DVBT Encoder Modulator U S E R M A N U A L Contents 1. GENERAL 1.1 Description 1.2 Specifications 2. INSTALLATION 2.1 What s in the Box 2.2 Connection 2.2.1 DEVICE Programming
Common Media Platform
CMP100 Common Media Platform Introduction Remote Network Management Unified Access to the Signal 4RU High Density Design Dual Power Supply 16 Hot-Swappable Modules N+1 Input Backup 1+1 Output Backup Introduction
NDS32xx Series MPEG4 AVC/H.264 Encoder
32xx Series MPEG4 AVC/H.264 Encoder Encoding Resolution 3211H 3211H-2 3214H 3224 3224-4 3224D 3224D-4 Channel 1 4 Standard MPEG4 AVC/H.264 1920*1080i 1280*720p 720*480i 720*576i HDMI HD/SD-SDI 1 1 2 2
INT-DS2 DVB-S/S2 SATELLITE MODULATOR DVB MODULATOR
INT-DS2 DVB-S/S2 SATELLITE MODULATOR Key Features In compliance with DVB-S/S2/DSNG and in partial compliance with DVB-S2x standards. Supporting up to 200Mbps at ASI and 80Mbps at TSoIP input. Capable to
HEVC H.265 TV ANALYSER
INTRODUCING THE WORLD S FIRST HEVC H.265 METER & TV ANALYSER Digital terrestrial TV is at the dawn of a new transformation driven by the need to release yet further spectrum in the so called second dividend
4 HDMI & Component HD to COAX and IPTV HD 480i/720p/1080i/1080p CC Modulator
Product Information Datasheet 4 HDMI & Component HD to COAX and IPTV HD 480i/720p/1080i/1080p CC Modulator 4 HDMI Digital RF modulator QAM, ATSC, DVB-T, ISDB-T, HDCP compliant modulator, HD Modulator Over
ADR-1000AS Compact Modular SMATV Headend
ADR-1000AS Compact Modular SMATV Headend ADR-1000AS is a compact modular SMATV headend, supporting up to 16 channels in one 19 4U chassis. It integrates multiple functions including DTV signal reception,
MyM-3S Micro Master. Installation Guide. English. design for TV
MyM-3S Micro Master Installation Guide design for TV 1 CONTENT 1. Introduction 2. Unpacking the unit 3. Connections and indications 4. IP settings 5. Menus and settings 5.1 Overview menu 5.2 Input settings
CHENGDU DEXIN DIGITAL TECHNOLOGY CO., LTD
NDS3208 8 in 1 MPEG-2 Encoder User s Manual NMS Version: 1.12.5 SW: 2.07 HW: 1.3 CHENGDU DEXIN DIGITAL TECHNOLOGY CO., LTD DIRECTORY Chapter 1 Product Introduction... 1 1.1 Outline... 1 1.2 Main Features...
Professional HD Integrated Receiver Decoder
Professional HD Integrated Receiver Decoder User Manual V1.00-C Preface About This Manual This manual provides introductions to users about how to operate the device correctly. The content includes introduction
Portable TV Meter (LCD) USER S MANUAL
1 Portable TV Meter User Manual (LCD) Portable TV Meter (LCD) USER S MANUAL www.kvarta.net 1 / 19 2 Portable TV Meter User Manual (LCD) Contents 1. INTRODUCTION... 3 1.1. About KVARTA... 3 1.2. About DVB...
BROADCAST VIDEO ENCODING SYSTEMS
BROADCAST VIDEO ENCODING SYSTEMS Video Encoding TV Modulation CREATE Your Own CATV QAM Cable or off air ATSC Channel HD MPEG2 and H.264 Encoder & Modulator Encode Latency 70ms Up to 4x HD-SDI Inputs Up
QAM HD Integrated Receiver Decoder with SDI/HDMI/ASI/IP Signal Outputs. User Manual B-IRD-HD-PRO-Q HD IRD
QAM HD Integrated Receiver Decoder with SDI/HDMI/ASI/IP Signal Outputs User Manual B-IRD-HD-PRO-Q HD IRD DIRECTORY Chapter 1 Product Outline... 1 1.1 Outline... 1 1.2 Features... 1 1.3 Specifications...
2 HDMI to DVB-T Encoder Modulator
2 HDMI to DVB-T Encoder Modulator (MPEG-2 HD/MPEG-4 HD Encoding + DVB-T Modulating) SW Version: 1.07 HW version: 0.6 Web NMS version: 1.03 Date: 27 th NOV, 2012 Intended Audience About This Manual This
WISI COMPACT HEADEND Channel Processing
WISI COMPACT HEADEND Channel Processing The new WISI COMPACT HEADEND System OH is best suited for use in small CATV networks, medium sized residences, high rise buildings, recreational facilities, hospitals,
HD-1600 Single Input MPEG-4 DVB-T HD Encoder/Modulator User Guide and Install Manual
digi-mod HD Range digi-mod HD-1600 www.resi-linx.com HD-1600 Single Input MPEG-4 DVB-T HD Encoder/Modulator User Guide and Install Manual Table of Contents Safety Precautions 2 Package Contents 2 Product
Channel processing equipment
7. Technical specifications Type C / ttx420c / ttx420 RF input freuency range 950-2150 MHz 47-862 MHz LNB powering/ control 0/13/18 V & 22 khz, 500 ma max. DiSEC 1.0, EN50607, EN50494 12 V 100 ma level
EK MODULATORS: THE MOST COMPLETE MARKET RANGE
EK : THE MOST COMPLETE MARKET RANGE ANALOG MD A REFERENCE MD A Code 121001 Inputs Nº 2 x AUDIO + VIDEO Audio regulation db 0-14 RF Outputs Nº 1 Frequency Range MHz 47-862 Standards B/G/D/K/H/I/L/M/N DBS
Investing in your future
Investing in your future As important as it is to have a technically superior platform for your networks, as important is the commercial platform. Technology changes and increasing quality requirements
Channel processing equipment
Channel processing equipment DVB to IP streamers sdi410c, sti410c, sda410c, sta410c, sai410c, saa410c 1. Product description DVB-S/S2 (sdi410c, sda410c), DVB-T/T2/C (sti410c, sta410c), DVB-ASI (sai410c,
Channel processing equipment
Technical specifications Type sdi480 RF input 4x QPSK / 8PSK COFDM / QAM frequency range 950-2150 MHz 47-862 MHz level/impedance 45-85 dbµv / 75 Ω 45-80 dbµv / 75 Ω symbol rate 2 45 Ms/s - LNB powering/control
SPAUN BluBox 16. Satellite Headend TEST REPORT
TEST REPORT Satellite Headend SPAUN BluBox 16 excellent technical quality due to specially designed hardware ICs automatically detects faulty settings extremely easy to use each unit contains a full tuner
Professional 8-in-1 TS Processor MX5308 USER MANUAL 2015/06
Professional 8-in-1 TS Processor MX5308 USER MANUAL 2015/06 MX5308 8-in-1 TS Processor License Declaration Without the prior written permission of ANTIK Technology, no part of this manual shall be added
DIGICAST DTVANE. DMB-9020 HD Professional IRD OVERVIEW
OVERVIEW Conforming to MPEG-2(MP@ML), DMB-9020 HD Professional IRD supports DVB-S2 Tuner standard, and adopts high-quality decoding of MPEG-2, MPEG-4, and H.264 in broadcast level. Its CI descrambling
Operating instructions
Professional Headend Solutions Operating instructions Contents 1. Safety and operating instructions...2 2. Device variants...2 3. General...2 4. Front view...3 5. Functional description...3 6. Adjustments...3
SPM x HDMI/AV to 1 x DVB-T/C Operation Manual
SPM-2011 2 x HDMI/AV to 1 x DVB-T/C Operation Manual QM-Products 2016 v1.0 1 1. IMPORTANT SAFETY PRECAUTIONS INFORMATION READ THE FOLLOWING WARNINGS BEFORE YOU USE YOUR DEVICE WARNING The following safety
RANGER Neo 2 ATSC TV, CABLE, SATELLITE & WIFI ANALYSER HEVC H.265 EASY OPERATION WIFI ANALYSER WIDEBAND LNB A NEW STANDARD IN FIELD STRENGTH METERS
A NEW STANDARD IN FIELD STRENGTH METERS TV, CABLE, SATELLITE & WIFI ANALYSER RANGER Neo 2 ATSC EASY OPERATION HEVC H.265 WIFI ANALYSER WIDEBAND LNB Hybrid user interface (touch + keyboard) High Efficiency
Broadcast 1 Channel LPTV HD/SD Universal Encoder
PRO1-BT-HDX Video Encoder For LPTV Broadcasting Broadcast 1 Channel LPTV HD/SD Universal Encoder The BT-ENCODER PRO1-BT-HDX is a Single Channel HD/SD Digital Video Broadcasting Encoder, perfect solution