M-8460Se Printer Standard Unit
|
|
- Joel Daniels
- 5 years ago
- Views:
Transcription
1 M-8460Se Printer Standard Unit Parts List Page 1-1 P/N
2 Table of Contents M-8460Se Spare Parts List Page Frame Assembly...3 Print Head Assembly...8 Ribbon Assembly Platen Frame Assembly...14 Cover Assembly...21 Cont PCB Assembly...24 Check PCB Assembly...25 Interface Option...26 Memory Option...27 Page 2 SATO M-8460Se Printer Parts List
3 Frame Assembly SATO M-8460Se Printer Parts List Page 3
4 Frame Assembly Page 4 SATO M-8460Se Printer Parts List
5 Frame Assembly SATO M-8460Se Printer Parts List Page 5
6 Frame Assembly NO. CODE DESCRIPTION QTY 5 PL ENGINE FRAME 1 10 MT HEX NUT 1 13 PB GUIDE POST 1 14 MC PAN HEAD SCREW 1 18 PR STAY 1 22 MN HEX SOCKET BOLT 2 23 PA GUIDE PLATE (HEAD BR) 1 25 PA SPRING BRACKET 1 27 MC PAN HEAD SCREW 1 29 PC SPRING (OPEN) 1 33 PB SHAFT(SUPPORT) 1 35 MN HEX SOCKET BOLT 2 37 PB SHAFT (RIBBON ADJUST) 1 40 PR ROLLER 1 41 PR FEED ROLLER 1 42 PA DISPENSE BAR BRACKET 1 44 MN HEX SOCKET BOLT 1 48 PT BALL SUPPORTER 1 49 PT BALL SUPPORTER 1 50 PE GEAR 1 51 ND E-RING PA PULLEY BRACKET PA PLATE NUT PB SHAFT (ROLLER) ND E-RING PR TENSION ROLLER MD PAN HEAD SCREW PT TIMING BELT PL MOTOR PULLEY MJ HEX SOCKET SET SCREW RH STEPPER MOTOR ASSY MC PAN HEAD SCREW PB SHAFT (IDLE) 1 Page 6 SATO M-8460Se Printer Parts List
7 Frame Assembly NO. CODE DESCRIPTION QTY 142 PE GEAR PE PULLEY PT BALL SUPPORTER ND E-RING PT TIMING BELT PT TIMING BELT PA SHAFT BRACKET MC PAN HEAD SCREW MA PAN HEAD SCREW MT HEX NUT PA TENSION BRACKET PB POST (TENSION) MD PAN HEAD SCREW PR TENSION ROLLER ND E-RING MD PAN HEAD SCREW PR KEYBOARD COVER MD PAN HEAD SCREW RJ KEY PCB SET MH PAN HEAD P TITE SCREW RH PSW CABLE PA CONNECTOR LOCK RJ DSW PCB SET MD PAN HEAD SCREW PH DIP SWITCH COVER RH DSW CABLE SET 1 SATO M-8460Se Printer Parts List Page 7
8 Print Head Assembly Page 8 SATO M-8460Se Printer Parts List
9 Print Head Assembly SATO M-8460Se Printer Parts List Page 9
10 Print Head Assembly NO. CODE DESCRIPTION QTY 2 RH SEN5 CABLE 1 3 MD PAN HEAD SCREW 2 7 PR PRESSURE CAM 1 9 ND E-RING 3 20 PA HEAD FRAME 1 24 MN HEX SOCKET BOLT 5 26 PA PLATE (ADJUST) 1 27 PL ADJUST COLLAR 1 29 MN HEX SOCKET BOLT 1 30 NA PLAIN WASHER 1 35 PL ADJUST COLLAR 1 39 PE HANDLE (B) 1 40 PD HANDLE (A) 1 41 PA LATCH HANDLE (C) 1 43 PE HANDLE (B) 1 45 MJ HEX SOCKET SET SCREW 2 46 MN HEX SOCKET BOLT 2 56 PA HEAD BRACKET (TOP) 1 59 PV BUSHING 1 66 PB SHAFT (ADJUST CAM) 1 69 PE ADJUST CAM 2 70 ND E-RING 2 71 PC SPRING (HEAD) 2 77 PA HEAD BRACKET (BOTTOM) 1 84 PR ADJUST PLATE 1 85 MD PAN HEAD SCREW 2 90 PB SHAFT (HEAD BRACKET) 1 93 MN HEX SOCKET BOLT 1 94 ND E-RING 2 97 PA RIBBON PLATE 1 98 MD PAN HEAD SCREW 2 99 PA PLATE SPRING (HEAD CAM) PC SPRING (HEAD OPEN) GH000661A PRINT HEAD RH HDS CABLE RH POWER & HEAD CORD SET PB SCREW (HEAD) 2 Page 10 SATO M-8460Se Printer Parts List
11 Ribbon Assembly SATO M-8460Se Printer Parts List Page 11
12 Ribbon Assembly NO. CODE DESCRIPTION QTY 2 RH SEN4 CABLE 1 3 MA PAN HEAD SCREW 2 4 PA SENSOR BRACKET(RIBBON) 1 5 MC PAN HEAD SCREW 1 7 PE DISK PLATE COVER 1 9 MD PAN HEAD SCREW 3 11 MD PAN HEAD SCREW 1 12 MA PAN HEAD SCREW 1 13 MT HEX NUT 1 20 RC RIBBON SUB(UNWIND) 1 21 RC RIBBON SUB(REWIND) 1 23 PT BALL SUPPORTER 4 25 PR PULLEY 1 27 ND E-RING 1 33 PA RIBBON FRAME 1 35 MC PAN HEAD SCREW 4 37 PV BUSH 1 38 PA ADJUST PLATE 2 39 MD PAN HEAD SCREW 4 40 MD PAN HEAD SCREW 2 43 PB SHAFT RIBBON 2 44 PE PLATE HOLDER BOSS 2 45 PA GUIDE PLATE 2 47 MH FLAT HEAD P TITE SCREW 4 48 MT HEX NUT 1 49 MA PAN HEAD SCREW 1 51 PC SPRING (BACK) 1 52 MA PAN HEAD SCREW 1 53 PA HOLD PLATE 2 54 PA FRICTION WASHER 2 55 PE DISK PLATE(A) 1 56 PR RIBBON BOSS 2 57 PE GUIDE PLATE(B) 1 59 PA SPRING 8 60 MH PAN HEAD P TITE SCREW 8 62 PT OIL LESS METAL WASHER 2 Page 12 SATO M-8460Se Printer Parts List
13 Ribbon Assembly NO. CODE DESCRIPTION QTY 63 PA DISK 2 64 PC SPRING 2 67 PE STOPPER COLLAR 2 68 PB ADJUST SCREW 2 69 MA PAN HEAD SCREW 2 72 PR PULLEY 1 74 PC SPRING (BACK) 1 76 MH PAN HEAD P TITE SCREW 1 SATO M-8460Se Printer Parts List Page 13
14 Platen Frame Assembly Page 14 SATO M-8460Se Printer Parts List
15 Platen Frame Assembly SATO M-8460Se Printer Parts List Page 15
16 Platen Frame Assembly Page 16 SATO M-8460Se Printer Parts List
17 Platen Frame Assembly SATO M-8460Se Printer Parts List Page 17
18 Platen Frame Assembly NO. CODE DESCRIPTION QTY 2 MN HEX SOCKET BOLT 1 3 MN HEX SOCKET BOLT 3 4 PR PLATEN FRAME 1 11 PB POST (LATCH) 1 12 PA PLATE SPRING 1 14 PB SHAFT (HOLDER) 1 15 NB SPRING WASHER 1 16 PR PLATEN ROLLER 3 17 PT BALL SUPPORTER 3 18 PT BALL SUPPORTER 3 20 PE PULLEY 3 21 ND E-RING 3 23 PA SUPPORTER CLAMP (A) 1 25 MN HEX SOCKET BOLT 2 26 PB SHAFT (LATCH HANDLE) C 1 28 PE HANDLE (C) 1 29 NG PARALLEL PIN 1 30 ND E-RING 2 32 PA LATCH HANDLE (HOLDER) 1 33 PC SPRING (LATCH HANDLE) 1 35 PA SUPPORTER CLAMP (B) 1 36 MN HEX SOCKET BOLT 2 39 PA PAPER GUIDE (LH) 1 41 MN HEX SOCKET BOLT 2 42 PA SLIDE GUIDE 1 44 PE SLIDER 1 45 PA SLIDE SPRING 1 47 MA PAN HEAD SCREW 1 48 MT HEX NUT 1 50 PA COVER (SEN1) 1 52 MA PAN HEAD SCREW 4 54 PD DISPENSE BAR 1 55 MN HEX SOCKET BOLT 2 57 RH SEN1 CABLE 1 58 MD PAN HEAD SCREW 2 59 RH SEN7 CABLE 1 60 MA PAN HEAD SCREW 2 63 PA MICRO SWITCH BRACKET 1 Page 18 SATO M-8460Se Printer Parts List
19 Platen Frame Assembly NO. CODE DESCRIPTION QTY 64 MC PAN HEAD SCREW 2 66 MN HEX SOCKET BOLT 3 67 PL PAPER LID BRACKET 1 69 PB SHAFT (RIBBON) 1 70 ND E-RING 2 72 PC SPRING (OPEN) 1 73 PA PAPER LID (BOTTOM) 1 76 PA LATCH HANDLE 1 77 PB SHAFT (LATCH) 1 78 PC SPRING (LATCH) 1 80 ND E-RING 2 82 PA SENSOR BRACKET (PITCH) 1 84 MD PAN HEAD SCREW 1 85 RH SEN2 CABLE 1 86 MJ THIN HEAD SCREW 2 88 PA PAPER LID (TOP) 1 90 MC PAN HEAD SCREW 2 92 MA PAN HEAD SCREW 2 93 MT HEX NUT 2 97 PE STOPPER COLLAR 2 98 PC SPRING (PRESSURE) PA ROLLER BRACKET PL ADJUST COLLAR PA WASHER MN HEX SOCKET BOLT NB SPRING WASHER NA FLAT WASHER PB SHAFT (PRESSURE ROLLER) PE ROLLER PE ROLLER PA PAPER GUIDE (LID) MC PAN HEAD SCREW PL ROLLER HOLDER (PRESS) PB PRESSURE ROLLER PT BALL SUPPORTER PA PLATE SPRING MJ THIN HEAD SCREW 4 SATO M-8460Se Printer Parts List Page 19
20 Platen Frame Assembly NO. CODE DESCRIPTION QTY 132 PR PLATE (HOLDER) (F) PR PLATE (HOLDER) (R) MA FLAT HEAD SCREW PB SCREW (HOLDER) PE COLLAR PB COLLAR MJ HEX SOCKET BOLT 3 Page 20 SATO M-8460Se Printer Parts List
21 Cover Assembly SATO M-8460Se Printer Parts List Page 21
22 Cover Assembly Page 22 SATO M-8460Se Printer Parts List
23 Cover Assembly NO. CODE DESCRIPTION QTY 2 PH CLOSE COVER (A) 1 4 PR POWER SUPPLY ASSY 1 5 GA300161A POW SWITCH 1 6 HD100311A FUSE 1 12 RH POW/SW CABLE 1 13 MC PAN HEAD SCREW 2 14 MC PAN HEAD SCREW 1 15 MC PAN HEAD SCREW 4 16 MC PAN HEAD SCREW 1 17 PH CLOSE COVER (B) 1 19 MC PAN HEAD SCREW 5 20 PH MEMORY CARD COVER 1 21 MC PAN HEAD SCREW 1 22 PH CLOSE COVER (C) 1 23 MD PAN HEAD SCREW 2 24 PR COVER BRACKET 1 26 RH SEN6 CABLE 1 28 MA PAN HEAD SCREW 2 32 PR ANTI STATIC BRUSH 1 33 MD PAN HEAD SCREW 2 34 MC PAN HEAD SCREW 3 36 PH OPEN COVER (A) 1 40 PH OPEN COVER (B) 1 41 PH SET PLATE 1 42 MA TRUSS SCREW 2 43 MA TRUSS SCREW 4 46 PB SPRING CASE (A) 1 47 PE SPRING CASE (B) 1 49 PC SPRING (OPEN) 1 50 PB SPRING SHAFT 2 51 MT HEX NUT 4 52 NA PLAIN WASHER 2 53 NB SPRING WASHER 2 55 PA COVER (SEN6) 1 SATO M-8460Se Printer Parts List Page 23
24 CONT PCB Assembly NO. CODE DESCRIPTION QTY 2 RJ CONT PCB ASSY-B 1 4 MD PAN HEAD SCREW 4 6 PC SPRING(LOCK) 1 8 PA CONNECTOR LOCK 1 10 RH PITCH SENSOR RELAY 1 12 RH SENSOR RELAY CODE 1 13 RJ MEMORY PCB ASSY 1 14 RJ MB FLASH MEMORY 1 UPGRADE (OPTION) Page 24 SATO M-8460Se Printer Parts List
25 Check PCB Assembly NO. CODE DESCRIPTION QTY 2 RJ CHECK PCB SET 1 4 RH CHECK CABLE SET 1 6 PA PCB BRACKET (CHECK) 1 8 MD PAN HEAD SCREW 6 SATO M-8460Se Printer Parts List Page 25
26 Interface Option NO. CODE DESCRIPTION QTY 2 MD SCREW 2 8 WCL IEEE-1284 PARALLEL INTERFACE (OPTION) 1 9 WCL SERIAL INTERFACE (OPTION) 1 10 WCL USB INTERFACE (OPTION) S ETHERNET INTERFACE (OPTION) S CX/TX INTERFACE (OPTION) 1 Page 26 SATO M-8460Se Printer Parts List
27 Memory Option NO. CODE DESCRIPTION QTY 2 RJ PC CARD PCB ASSY 1 13 PT SPACER 2 14 MD PAN SCREW 4 16 PT SPACER 2 17 MD PAN SCREW 2 18 MT NUT 2 SATO M-8460Se Printer Parts List Page 27
M-8400RVe Printer. Parts List. Page 1-1. P/N Rev.B
M-8400RVe Printer Parts List Page 1-1 P/N 9001085 Rev.B Table of Contents M-8400RVe Parts List Page Frame Assembly...3 Head Assembly... 8 Ribbon Assembly... 11 Feed Roller Assembly... 16 Base Cover Assembly...
More informationM8400RV Base Cover Assembly Item # Part Number Part Description Qty
Base Cover Assembly Item # Part Number Part Description Qty 1 PH1741200 Base frame 1 2 PT6680100 Rubber foot 4 3 PA3741000 Frame bracket 1 4 MD4301022 Pan head screw 3 5 PA3742500 Frame bracket 1 6 MD4301022
More informationFor printer model: TG3 Series
RFID User Guide Parts List For printer model: TG3 Series PN: 9001227(A) Read this User Guide before and during usage of the above product. Keep this document handy for future reference. www.satoamerica.com
More informationCollator series 300/400, 310B Spare parts list
Collator series 300/400, 30B Spare parts list AUGUST 997 Part # 9049 USER INFORMATION T0703 This Spare part list is devided into one Series 300/400 section, one 30 B section and one Paper feeder section.
More informationThingMagic RFID Module INSTALLATION GUIDE. FOR CL e SERIES
ThingMagic RFID Module INSTALLATION GUIDE FOR CL e SERIES SATO International Pte Ltd 438A Alexandra Road #05-0/02 Alexandra Technopark Singapore 9967 Tel: (65) 627 222 Fax: (65) 627 25 Email: customerservice@sato-int.com
More informationContents Section 9, Illustrated Parts
Contents Section 9, Illustrated Parts Figures 9-1. Parts of RT7... 9-5 9-2. RT7 Drive Assembly... 9-9 9-3. RT7 Refrigeration System... 9-10 9-4. Parts of RT7 PLUS... 9-15 9-5. RT7 PLUS Drive Assembly...
More informationOrdering parts and supplies
Ordering parts and supplies Parts Order replacement parts from the following website: http://www.hp.com/ssg/parts/direct_order.html Related documentation and software Order documentation and software from
More information5351 Series Printer Parts Information Manual
5351 Series Printer Parts Information Manual Pertech TM Pertech Resources Inc. 2009 220324 Rev.02 Page 1 Disclaimer Information in this document is subject to change without notice. Consult your Pertech
More information3. Disassembly and Reassembly
3. Disassembly and Reassembly 3.1 General Precautions on Disassembly When you disassemble and reassemble components, you must use extreme caution. The close proximity of cables to moving parts makes proper
More informationMP Maker Pro Mk.1. Quick Start Guide
MP Maker Pro Mk.1 P/N 33013 Quick Start Guide ONLINE SUPPORT Monoprice is pleased to provide free online support. For order related issues, contact the Customer Service department through the Live Chat
More informationM SERIES DISPENSER M SERIES DISPENSER
M SERIES DISPENSER PART NUMBER 5006621 M SERIES DISPENSER M SERIES DISPENSER... M - 1 M15 TOP EXPLODED VIEW... M - 2 M15 TOP PARTS LIST... M - 3 M15 BASE EXPLODED VIEW... M - 4 M15 BASE PARTS LIST... M
More informationINSTRUCTION MANUAL AND PARTS LIST
7360R-2SS INSTRUCTION MANUAL AND PARTS LIST 1. COVER COMPONENTS Ref. No Part No. Name Qty 1 100 1400 Face plate arm 1 2 100 1401 Gasket 1 3 100 1287 Rubber plug (ɸ19) 1 4 100 1288 Rubber plug (ɸ11.8)
More informationFELIX3.1 assemblymanual
FELIX3.1 assemblymanual Assemblymanualfor: FELIX3.1Single FELIX3.1Dual copyrightinformation Thisdocumentcontainsproprietaryinformationthatisprotectedbycopyright. nopartofthisdocumentmaybephotocopied,reproduced,ortranslatedtoanotherlanguagewithoutthepriorwritenconsentoffelixroboticsbv.
More information2100/2200/4100/6200 & MPB Series Bottom Mount Drive Pack. for Standard Load Parallel Shaft 60 Hz Gearmotors
00/00/400/600 & MPB Series Bottom Mount Drive Pack. for Standard Load Parallel Shaft 60 Hz Gearmotors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box
More informationPushbutton Units and Indicator Lights
Insert labels and insert caps Clear, illuminated and indicator lights can be fitted with insert labels and caps for identification purposes. These labels and caps are made of a semi-transparent molded
More informationPARTS LIST ERSATZTEILLISTE LISTE DE PIECES
MBS-708CS Metal Working Bandsaw 50000331T 400/50/1 PARTS LIST ERSATZTEILLISTE LISTE DE PIECES WMH Tool Group AG Bahnstrasse 24, CH 8603 Schwerzenbach www.wmhtoolgroup.ch; info@wmhtoolgroup.ch Tel +41 (0)
More information2100, 2200, 4100, 6200, MPB Series Side Mount Drive Package for Light Load 60 Hz Gearmotors
00, 00, 400, 600, MPB Series Side Mount Drive Package for Light Load 60 Hz Gearmotors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood
More informationCC-M12 and CC-M48 Series Controllers Model No. CC-M12-M48
Form No. 380-0052 Rev A CC-M12 and CC-M48 Series Controllers Model No. CC-M12-M48 Register at www.toro.com. Original Instructions (EN) *380-0052* A Ordering Replacement Parts To order replacement parts,
More informationStep 1. 1x NXT Ultrasonic Sensor
Start with the build completed in Lesson 3 of the TETRIX Getting Started Guide. Step 1 involves removing an element from the model. This element will be reattached later. Parts to be Removed Step 1 1x
More information12A-969D190 LC-215 (1997) Page 1 of 12 Cables And Pivot Shaft
12A-969D190 LC-215 (1997) Page 1 of 12 Cables And Pivot Shaft 12A-969D190 LC-215 (1997) Page 2 of 12 Cables And Pivot Shaft 1 746-0939 1 S 6 Spd. Cable Code: N Notates a new part (not 2 656-0613 1 S Pulley
More informationCM MTC PARTS LIST
8650 Enterprise Drive, Peosta IA 52068-0050 319-556-7484 / Fax 319-556-1235 CM-2400-0MTC PARTS LIST ENGINE OIL GRADE: ENGINE OIL CAPACITY: PUMP OIL: PUMP OIL CAPACITY: NOZZLE SIZE: 30W 21 oz. MI-T-M #AW-4085-0016
More informationService Parts Diagrams. For Model: 10/20/09 Service Parts Diagrams for the Rear Projection SMART Board 3000i-DV Interactive Whiteboard 1
Service Parts Diagrams For Model: 000i-DV with the serial NEC MT060 numbers Serial greater numbers than 000 000i-DV-09000 to 0999 0/0/09 Service Parts Diagrams for the Rear Projection SMART Board 000i-DV
More informationBriggs&Stratton 44Q B1
Accessories IPL, Briggs&Stratton 44Q777-1272-B1, 2010-03 Briggs&Stratton 44Q777-1272-B1 Spare parts Ersatzteile Pièces détachées Reserve onderdelen Repuestos Reservdelar 48 SHORT BLOCK 1329 REPLACMENT
More informationMDT3 and MDT4 Service Parts
This parts lists contains part numbers for the service parts available for the MDT and MDT4. They have been manufactured in both 60 Hz and 50 Hz models. The 60 Hz models are: MDTF-A or MDTFA-H MDT4F-A
More information8mm PrecisionPro (Green) DL Spliceable 7-13 Tape Feeder. T Rev. B hd This document supports assembly Rev. -
8mm PrecisionPro (Green) DL Spliceable Tape Feeder 8mm PrecisionPro (Green) DL Spliceable Tape Feeder 8mm PrecisionPro (Green) DL Spliceable Tape Feeder 8mm PrecisionPro (Green) DL Spliceable 7-13 Tape
More informationAUDIO ROOF KIT P/N , , APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 6
AUDIO ROOF KIT P/N 2882064, 2882065, 2882066 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please
More informationeasydelta BUILD MANUAL easydelta 3D printer design & documentation by Achatz Industries Haefland 8A 6441 PA Brunssum The Netherlands
easydelta BUILD MANUAL easydelta 3D printer design & documentation by Achatz Industries Haefland 8A 6441 PA Brunssum The Netherlands BUILD MANUAL Welcome to the 1. Edition Build Manual for your easydelta
More informationManual placement system MPL3100. for BGA, CSP and Fine-Pitch components
Manual placement system MPL3100 for BGA, CSP and Fine-Pitch components Part No: MPL3100BA1.0e Issue Date: 02/2001 You have opted for an ESSEMTEC MPL3100 pick and place system. We thank you for this decision
More informationEndurance Robotics PT-3
Endurance Robotics PT-3 The Endurance Robotics Pan and Tilt PT-3 base is a rugged pan and tilt system based around standard sized hobby servos. Featuring all around rigid 1/4" ABS laser cut construction,
More informationSPARE PARTS OVERVIEW.
SPARE PARTS OVERVIEW www.spiro.ch CONTENTS Contents Spare Parts Packages... 4 Silver Package...4 Tubeformer Packages - Formroller Units...5-8 Tubeformer Packages - Slitter Maintenance...9 Tubeformer Packages
More informationSPIRAL MIXERS CONTENT CHAPTER 1 COMPANY BRIEF INTRODUCTION OPERATION INSTRUCTION
SPIRAL MIXERS OPERATION INSTRUCTION CONTENT CHAPTER 1 COMPANY BRIEF INTRODUCTION.....P1 CHAPTER 2 PRODUCTION INTRODUCTION.....P2 2.1 Machine trait........p2-3 2.2 Technical parameter.......p4-6 CHAPTER
More informationCM MVC & CM MHC PARTS LIST
8650 Enterprise Drive, Peosta IA 52068 319-556-7484 / Fax 319-556-1235 CM-2400-0MVC & CM-2403-0MHC PARTS LIST (After Serial #215703) Vanguard Engine Oil Grade: Vanguard Engine Oil Capacity: Honda Engine
More informationRevision 1.0 Parts List Mega
Revision.0 www.grindex.com Parts List 824.390 Mega Table of Contents Table of Contents Introduction... 2. Specially approved products... 2 2 Product Description...3 2. Products included... 3 2.2 The data
More informationTYPE ASR 650 / 850 FLAT LIST 1/3
TYPE ASR 650 / 850 FLAT LIST 1/3 TYPE ASR 650 / 850 FLAT LIST 1/3 NR. ARTICLECODE DESCRIPTION REMARKS 1 110006000.2 Fixation (grey) for antenna ASR 650 FLAT 1 110006004 Fixation (grey) for antenna ASR
More informationCable ISOBUS Active Termination
ISOBUS Retrofit Kit Ag Leader Technology Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity ISOBUS Retrofit Kit 4100843 1 Hex Head Bolt
More informationPARTS LIST FOR CM-1250-A/C 1.5 HP
8650 Enterprise Drive, Peosta IA 52068 563-556-7484 / Fax 563-556-1235 PARTS LIST FOR CM-1250-A/C Motor Specs: Pump Oil: Pump Oil Capacity: Nozzle Size: 1.5 HP / 1 Phase / 115 Volts Mi-T-M #AW-4085-0016
More informationRevision 1.0 Parts List Salvador 1~, 3~
Revision.0 www.grindex.com Parts List 809.8 Salvador ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded
More informationStep 1. 2x Kep Nut 1x Left Motor Assembly
Start with the build completed in Lesson 3 of the TETRIX Getting Started Guide. Steps 1 to 3 involve removing elements from the model. These elements will be reattached later. Parts to be Removed Step
More information1Ver.0.2OldStyle. t r i. v t o. m e. a c
Se r v omo t o rf o r I ndus t r i a lse wi ngma c hi ne SV7 1Ver.0.2OldStyle or hmot c t u l c hana gt n i v a s gy r ne e e r o m ntand e i c i f f e e r Mo SV-71 INSTRUCTION MANUAL Ver. 0.2 Old Style
More informationChallenges. TETRIX Getting Started Guide STEM Challenge Building Guide. Step 1. Parts Needed. Tips
Note: The Arm and Gripper Extension has been recommended as an initial build to complete the STEM Challenge. The STEM Challenge Sample Program and Programming Guide have been created to work effectively
More informationRevision 1.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 The data plate...3 Parts... 4 Exploded view...
More informationPC-250. SMD Taped Parts Counter Operator s Manual. ISO 9001:2008 Certified. V-TEK, Incorporated 751 Summit Avenue Mankato, MN USA
PC-250 SMD Taped Parts Counter Operator s Manual ISO 9001:2008 Certified V-TEK, Incorporated 751 Summit Avenue Mankato, MN 56001 USA (P) 507-387-2039 (F) 507-387-2257 www.vtekusa.com Dear Customer: All
More informationENGLISH INSTRUCTION MANUAL
ENGLISH INSTRUCTION MANUAL * "CompactFlash(TM)" is the registered trademark of SanDisk Corporation, U.S.A. CONTENTS. PREFACE.... SET-UP... () Installing M-9 small sized motor unit... () Installing to the
More informationCabling and Completing Assembly of the Cisco TelePresence System 1000
CHAPTER 5 Cabling and Completing Assembly of the Cisco TelePresence System 1000 Revised: April 5, 2010, Introduction This chapter describes how to set up and connect the cables, microphone and Cisco Unified
More informationMaterials: Programming Objectives:
Lessons Lesson 1: Basic Chassis Overview TETRIX Getting Started Guide In this lesson, users will learn how to use the elements of the TETRIX system that will be involved in building the basic chassis of
More informationSingle sensor setup with NIVEL210
Single sensor setup with NIVEL210 Essential Items: 576 198 NIVEL210 RS232 748 335 Cable, Lemo 0 power supply cable Lemo 1 802 902 Cable, Lemo 0 722 409 Power supply plus power cords 802 902 576 198 748
More informationField Service Procedure Replacement PCU Kit, Coastal
1. Brief Summary: Troubleshooting document for diagnosing a fault with and replacing the PCU assembly on the coastal series antennas. 2. Checklist: Initialization Rate Sensor Outputs Run the Built In Test
More informationA449-6S 70 CENTIMETER FM YAGI ANTENNA MHz
ASSEMBLY AND INSTALLATION A449-6S 70 CENTIMETER FM YAGI ANTENNA 440-450 MHz COMMUNICATIONS ANTENNAS 951425 (7/93) WARNING THIS ANTENNA IS AN ELECTRICAL CONDUCTOR. CONTACT WITH POWER LINES CAN RESULT IN
More informationInstruction Guide February 2017
Instruction Guide February 2017 3M Instruction Guide: 3M TM Locator Plate 3443-81-XX, 3D-Printed Instructions for the assembly of 3M TM Ribbon Cable Wiremount Socket Assembly, 451 Series 1.0 General 1.1
More informationSystems Pow-R Breakers Renewal Parts and Accessories
Systems Pow-R Breakers Renewal Parts and Accessories Renewal Parts RP01301013E Effective February 2006 Supersedes RPD29-890A pages 1 16 dated, March 2000 Cutler-Hammer SPB 100, 65 and 50 Series Contents
More informationA CENTIMETER FM YAGI ANTENNA MHz
ASSEMBLY AND INSTALLATION A449-70 CENTIMETER FM YAGI ANTENNA 440-450 MHz COMMUNICATIONS ANTENNAS 951424 (10/91) WARNING THIS ANTENNA IS AN ELECTRICAL CONDUCTOR. CONTACT WITH POWER LINES CAN RESULT IN DEATH
More informationM1, M2GO and M2PC MIDI PCB Module Installation Guide SMPTE PCB Module Installation Guide
M1, M2GO and M2PC MIDI PCB Module Installation Guide SMPTE PCB Module Installation Guide Author Part number Date Matthias Hinrichs/Chris Foblets 35000620-B 20.06.2012 This guide is also available for download
More information3. Electronics and MMU2 unit assembly
Written By: Jakub Dolezal 2018 manual.prusa3d.com/ Page 1 of 34 Step 1 Tools necessary for this chapter Please prepare tools for this chapter: 2.5mm Allen key for M3 screws 2mm Allen key for nut alignment
More information16S151-16S181 16S221-16S251 Planetary Gear with HELICAL TEETH
400.195 ZF EcoSplit Models 16S151-16S181 16S221-16S251 Planetary Gear with HELICAL TEETH 04/2008 File ZFE0023.Pdf 1 Z.F. EcoSplit III 6S151 to 16S25 6S251 From 16S1 suitable to : Planetary Gear with HELICAL
More informationRECORDERS 0001 FLIGHT DATA RECORDER SYSTEM INSTALLATION FLIGHT DATA RECORDER SYSTEM INSTALLATION FIG 0001 PAGE 0
RECORDERS 0001 FLIGHT DATA RECORDER SYSTEM INSTALLATION FLIGHT DATA RECORDER SYSTEM INSTALLATION 31-30 FIG 0001 PAGE 0 0001-001 FLIGHT DATA RECORDER SYSTEM - INST (SD3 06 6073XH) (SD3 81 6242XL) 010 SE40L041V
More informationSPECIFICATIONS: Model: Supply Voltage: LED: Weight: Size: Fuse: Power Consumption: Working Position: Duty Cycle: DMX Channels:
STEALTH WASH ZOOM Introduction: The Stealth Wash Zoom is a unique DMX intelligent moving head unit. The Stealth Wash Zoom has 3 operating modes; sound active mode, show mode, or controlled via DMX controller.
More informationDLMP Installation Instructions
DLMP Installation Instructions Tools Needed Posidrive No.3 Screwdriver Large Flat Head Screwdriver 2x 10mm Spanner 1x 13mm Spanner Ø8mm Drill Ø6mm Drill Kit Contents [ ] 1x Tube 2.5M long 17420 [ ] 2 x
More informationAUTOMATIC TAPING MACHINE INSTRUCTION MANUAL TAIYO SEIKI CO., LTD.
- AUTOMATIC TAPING MACHINE INSTRUCTION MANUAL TAIYO SEIKI CO., LTD. 1 Contents CONTENTS 1. Introduction... 2 1-1. Important safety notice...2 1-2. Precautions for use and installation...2 1-3. Operating
More informationStep 1. 1x Single-Servo Motor Bracket. 1x L Bracket
Extensions TETRIX Getting Started Guide Step 1 1x Single-Servo Motor Bracket 1x L Bracket 3x 5/16" SHCS 3x Kep Nut Tips The 7/64" and 5/64" hex keys will be used in this model. Ensure that the teeth of
More informationProdigy Eclipse ECC and EH222 Service Parts EH222 Cabinet - C Series
This part list contains the service parts for the Eclipse ECC 800 and 000 systems. Prodigy Plus D Series production began in late 0. The models that are covered include: EH - head ECC0800 - condensing
More informationDISCOVER SE: 19 INCH LCD TREADMILL CONSOLE
DISCOVER SE: 19 INCH LCD TREADMILL CONSOLE PARTS MANUAL 19DT-XXXXX-XX EAT, EPT, EDT, EIT, ENT, EST, FAT, FPT, FDT, FIT, FXT, FST October 2018 Table of Contents Console Table 1 Common Boards for Consoles
More informationNewScope-7A Operating Manual
2016 SIMMCONN Labs, LLC All rights reserved NewScope-7A Operating Manual Preliminary May 13, 2017 NewScope-7A Operating Manual 1 Introduction... 3 1.1 Kit compatibility... 3 2 Initial Inspection... 3 3
More informationIndustrial Monitor Update Kit
Industrial Monitor Update Kit (Bulletin Number 6157) Installation Instructions 2 Table of Contents Table of Contents Industrial Monitor Update Kit... 3 Overview... 3 Part 1 - Initial Preparation... 5 Part
More informationAccessories EXTENSION CABLE OPTIONS - HOW TO ORDER. Standard 6-Pin connector type (D60) used with R-Series G-Series. Type DJ.
EXTENSION CABLE OPTIONS - HOW TO ORDER Standard 6-Pin connector type (D60) used with R-Series G-Series 1 2 3 4 5 6 7 8 K6 = Female connector, (straight exit), and standard (PVC jacket) for sensors with
More informationExploded Views and Parts List 1. HCF MAIN. Exploded View. Parts List. Copyright SAMSUNG. All rights reserved.
Exploded Views and Parts List. HCF MAIN Exploded View Parts List No. Lvl. Loc. Material Code Description & Specification JC95-0978A COVER-CASSETTE; K7600 JC9-04A DRIVE-FEED HCF; K7600 JC9-05A DRIVE-PICKUP;
More informationAristoMig U320w 208/230/400/460/475/500 V 3~ 50/60 Hz With cooling unit and central connection
Spare parts list Edition 060727 Valid for serial no. 310 -xxx -xxx, 445 -xxx -xxx, 620 -xxx -xxx The AristoMig 450 power source is renamed: New name Old name Mig 4500i AristoMig 450 Mig U4500i AristoMig
More informationRevision 1.0 Parts List Mega
Revision.0 www.grindex.com Parts List 824.400 Mega Table of Contents Table of Contents Introduction... 2 Specially approved products...2 Product Description...3 The data plate...3 Exploded Views...4 Drive
More informationOWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: LPDA 200 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DRAWING - WARRANTY AntennaTek, Inc. 425 S. Bowen, #4 Longmont,
More informationINSTRUCTIONS and PARTS MANUAL STAND ALONE CDS LINEAR WEAVER
INSTRUCTIONS and PARTS MANUAL STAND ALONE CDS LINEAR WEAVER Please record your equipment identification information below for future reference. This information can be found on your machine nameplate.
More informationMedium Box for Cable Termination
FIST-MB2-T I N S T A L L A T I O N I N S T R U C T I O N Medium Box for Cable Termination Contents 1 Introduction 1.1 Product description. 2 General 2.1 Tools 2.2 Kit contents 3 Installation and pre assembling
More informationPanzer 3.0 Assembly Instructions & Checklist
Panzer 3.0 Assembly Instructions & Checklist Parts Included & Preparation Legend A. 5x Silver M4 Aluminum Screws B. 4x 10-24 Screws C. 8x 4-40 Pan head Screws D. 2x 4-40 Flat head Screws E. 2x 4-40 Nuts
More informationIP-LINX Fiber :: X-XXXX
Fiber :: 055-797X-XXXX User Manual Telect, Inc. All rights reserved. 146653-A0 Table of Contents Chapter 1: Introduction...3 1.1 Tools Required...3 1.2 Additional Parts...3 1.3 Assemblies...3 Chapter 2:
More informationFIST-MB2-S. FIST Medium Box for Cable Splicing Only. 4 Cable installation. 1 Introduction. Contents. 2 General. 5. Fiber routing to individual trays
FIST-MB2-S I N S T A L L A T I O N I N S T R U C T I O N FIST Medium Box for Cable Splicing Only Contents 1 Introduction 1.1 Product description 2 General 2.1 Tools 2.2 Kit contents 3 Installation and
More informationSite Installation Model MP-8433
Site Installation Model MP- Rev. //0 SCOREBOARD SITE INSTALLATION INSTRUCTIONS CAUTION: All American Scoreboards (AAS) recommends the sign be installed by a licensed contractor, and must meet all local
More informationSite Installation Model MP-8424
Site Installation Model MP- Rev. //0 SCOREBOARD SITE INSTALLATION INSTRUCTIONS CAUTION: All American Scoreboards (AAS) recommends the sign be installed by a licensed contractor, and must meet all local
More informationKRAMER ELECTRONICS LTD. USER MANUAL MODEL: RTBUS-12 Round Table Connection Bus. P/N: Rev 1
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: RTBUS-12 Round Table Connection Bus P/N: 2900-300099 Rev 1 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 3 Overview 3 3.1
More informationHigh Performance (Gold Plus) Spliceable Tape Feeder Part Number: Part Number: Revision 3 Jun 2008 No.
8mm High Performance (Gold Plus) Spliceable Tape Feeder Part Number: 50934707 12mm High Performance (Gold Plus) Spliceable Tape Feeder Part Number: 50934807 Revision 3 Jun 2008 No. 0930D-E010 i Table
More informationRAIL BULL TRACK WELDING CARRIAGE WITH OSCILLATOR
RAIL BULL TRACK WELDING CARRIAGE WITH OSCILLATOR The Rail Bull is a track welding carriage designed to produce butt and fillet welds with or without oscillation. The carriage can work in PA (flat), PB
More informationDLMP-45/45R Installation Instructions
DLMP-45/45R Installation Instructions Tools Needed Posidrive No.3 Screwdriver Large Flat Head Screwdriver 2x 10mm Spanner 1x 13mm Spanner Ø8mm Drill Ø6mm Drill Kit Contents [ ] 1x Tube 2.5M long 17420
More informationTRAINING. Manual. DVD-VCR COMBINATION Chassis : Kaiser SV-DVD440
AUX DVD-VCR COMBINATION Chassis : Kaiser SV-DVD440 ELECTRONICS TRAINING MANUAL SV-DVD440 TRAINING DVD-VCR COMBINATION Manual CONTENTS 1. Precautions 2. Reference Information 3. Product Specification 4.
More informationBelts ITEM DESCRIPTION FITS MACHINES
Belts PDG.83226.50 4 Row Belt PDG 8000P (propane) PDG.83226.30 3 Row Belt PDG 8000P (propane) PDG.83226.00 Belt, 3/3VP 450 GATES PDG 8000P (propane) PDG.80039.00 Belt, PK21 Bottom PDG 8000 PDG.80040.00
More informationAS-300D Series Smart Bench Scales Owner s Manual
DETE CTO A Division of Cardinal Scale Manufacturing Co. AS-300D Series Smart Bench Scales Owner s Manual 8527-M214-O1 Rev B 01/03 PO BOX 151 WEBB CITY, MO 64870 417-673-4631 Printed in USA INTRODUCTION
More information8753E, 8753ET, and 8753ES Network Analyzer Option 1D5 High Stability Frequency Reference Upgrade Kit. Applicable Upgrade Kit Model Number
Installation Note 8753E, 8753ET, and 8753ES Network Analyzer Option 1D5 High Stability Frequency Reference Upgrade Kit Network Analyzer Model Number 8753E 8753ET 8753ES Applicable Upgrade Kit Model Number
More informationIP-LINX. Installation Guide
Installation Guide Installation Guide, 146653-4 Copyright 2017, Telect, Inc. All Rights Reserved Telect and Connecting the Future are registered trademarks of Telect, Inc. 22425 East Appleway Ave. # 11
More informationOWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: MOD 550 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DRAWING - WARRANTY AntennaTek, Inc. 425 S. Bowen, #4 Longmont,
More informationRevision 3.0 Parts List Salvador 1~, 3~
Revision 3.0 www.grindex.com Parts List 809.8 Salvador ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data
More informationRP 4 DISK PACK DRIVE ILLUSTRATED PARTS REAKDOWN EK-ORP04-IP-002 REVISION HISTORY HOW TO USE THE IPB
ILLUSTRATED PARTS REAKDOWN HOW TO USE THE IPB GENERAL This IPB is compiled following the organization and nomenclature of the engineering drawing structure. MAJOR ASSEMBL Y LOCATOR The Major Assembly Locator
More informationRevision 2.0 Parts List Minor
Revision.0 www.grindex.com Parts List 803.8 Minor Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3 Exploded
More informationHow To: Replace the stock Antenna with a CB Antenna A CFans Members Mod Project by coyote
How To: Replace the stock Antenna with a CB Antenna A CFans Members Mod Project by coyote Skill Level: Easy Disclaimer: Please use caution and seek professional assistance when necessary. ColoradoFans.com,
More informationAmphenol. Amphenol-Tuchel Electronics GmbH. C 112 Series M12 - Connectors
Amphenol Amphenol-Tuchel Electronics GmbH C 112 Series M12 - Connectors We connect con The company Amphenol-Tuchel Electronics is a worldwide leader in electrical connectors and contacting devices. Our
More informationKeysight Noise Figure Measurement Capability Upgrade Kit
Keysight Noise Figure Measurement Capability Upgrade Kit To Upgrade PNA-X N5244A or N5245A with Option 423, N5244B Option 422 or Option 423, N5245B Option 422 or Option 423 to include Option 029 Upgrade
More informationAlice EduPad Board. User s Guide Version /11/2017
Alice EduPad Board User s Guide Version 1.02 08/11/2017 1 Table OF Contents Chapter 1. Overview... 3 1.1 Welcome... 3 1.2 Launchpad features... 4 1.3 Alice EduPad hardware features... 4 Chapter 2. Software
More informationAssembling and Mounting the Presentation Display, Speakers, Speaker Screens, and Table Door
CHAPTER 8 Assembling and Mounting the Presentation Display, Speakers, Speaker Screens, and Table Door July 13, 2012, This document provides you with the procedures you perform to assemble and mount the
More informationINSTRUCTIONS and PARTS MANUAL STAND ALONE CDS LINEAR WEAVER
INSTRUCTIONS and PARTS MANUAL SD ALONE CDS LINEAR WEAVER Please record your equipment identification information below for future reference. This information can be found on your machine nameplate. Model
More informationTable of Contents REVISION HISTORY...2 BASIC COMPONENTS...3 GAME PLAY/ SEQUENCE BEHAVIOR...4 GAME SETUP...6 MAIN ELECTRONIC COMPONENTS...
Table of Contents REVISION HISTORY...2 BASIC COMPONENTS...3 GAME PLAY/ SEQUENCE BEHAVIOR...4 GAME SETUP...6 MAIN ELECTRONIC COMPONENTS... 15 TECHNICAL OPERATION... 20 PROGRAMMING OPTIONS... 22 ERROR CODES
More informationBasics of building the ROV Rev2
Basics of building the ROV Rev2 www.rollette.com/rovrev2 1. Assemble the PVC pipe hull as shown below. All pieces are off the shelf parts. The only parts that need to be cut to length are the 2 pipe. This
More informationPower Rack with Lat Pull
Power Rack with Lat Pull BD-7 Owner's Manual VA0900 D SAFETY & PRECAUTIONS IMPORTANT: READ ALL PRECAUTIONS CAREFULLY BEFORE USING THIS PRODUCT. RETAIN OWNER'S MANUAL FOR FUTURE REFERENCE. Note: This item
More informationRevision 2.0 Parts List Minette 1~, 3~
Revision.0 www.grindex.com Parts List 80.7 Minette ~, 3~ Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3
More informationTV Lift System Model CL-65 Installation Instructions
TV Lift System Model CL-65 Installation Instructions Contact: Support@Nexus21.com Toll Free: (866) 500-5438 Phone: (480) 951-6885 Fax: (480) 951-6879 Revised: 01/17/17 Below is a parts list describing
More information2018 PARTS CATALOG. Head Office - Calgary, AB, Canada Mounting, Parts, Service, Engineering, Administration
2018 PARTS CATALOG 2018 PARTS CATALOG DY has you covered, coast to coast, country to country. With parts for all pump brands in stock, our parts and service departments are there when you need us most.
More information