LENGTH LEAD WIRES LENGTH. Lead wires at one end. Lead wires at both ends. See length ordering guide. Standard is 0975(975mm)

Transcription

1 TWO TONE WHITE LEDS DESCRIPTION Long Silicone Light Series two-tone white products offer a two-circuit system for varying white lighting. The durable and flexible lighting strands consistently illuminate exterior facades, long linear applications, coves, contours and other architectural features. Adjust the Kelvin temperature in your project environment to deliver the perfect effect. KEY FEATURES AND BENEFITS ORDERING PRODUCT No. GL A1 C PRODUCT OUTPUT LED COLOR 1 PRODUCT GL-C Long Silicone Light Two Tone 4 LEAD WIRES - W 4 LEAD WIRES LENGTH LENGTH Lead wires at one end. Lead wires at both ends. Construction: LEDs sealed in silicone rubber Installation: See ACCESSORIES for options on straight and flexible mounting channels. Environment: Exterior. IP67 rated. Water and dust resistant. Proper drainage required. Product should not reside in standing water. Not for use as a submersible light source. Operating Temperature: -10 to 55 C (14 to 131 F) Bending Radius: 30 mm horizontal 2 OUTPUT 10 LED 10mm pitch 3 LED COLOR PRODUCT No. C TWO TONE Alternating 3200K and 5000K LEDs PRODUCT NO. LED COLOR GL10-96A1C /5000K 5 LENGTH Enter 4-digit code See length ordering guide. Standard is 0975(975mm) Power and Control: DMX-512, DALI on/off, and dimming control options. See POWER AND CONTROL data sheets or contact factory for more information. PRODUCT SPECIFICATIONS LEDS 96/m LED PITCH OUTPUT lms/m INPUT 24VDC WATTS 1 12 W/m WIDTH 2 HEIGHT 2 16 mm LENGTH 3 WEIGHT 975 mm BEAM ANGLE 130 TRIM POINTS 160 g (5.6 oz) per meter Every 120 mm 1 With individually controlled 3200K and 5000K circuits illuminated. 2 End cap is 13x20 mm. See DRAWINGS. 3 Standard. See LENGTH ORDER GUIDE. Page 36 Specifications subject to change. Visit for the most current product data A4.

2 DIMENSIONS GL10 MODELS 75-5,055 mm with end caps Trim in 60 mm increments END CAPS () TWO-TONE GL-C MODELS 135-5,055 mm with end caps Trim in 120 mm increments 13 mm 20 mm GL-M RGB MODELS 195-5,055 mm with end caps Trim in 180 mm increments GL20 MODELS 135-5,055 mm with end caps Trim in 120 mm increments 20 mm (13/16 in) (3/8 in) GL30 MODELS 195-5,055 mm with end caps Trim in 180 mm increments 30 mm Specifications subject to change. Visit for the most current product data A4. Page 39

3 SELECTED MODELS DOWNLOAD IES FILES AT ACCESSORIES 1 ALUMINUM C CHANNELS FAS00-01S Rigid channel for straight line installations. Weight : 80g FAC10-01S Flexible channel for maintaining installations with curves. Weight : 80g W x H x L: 10 x 10.5 x 1000 mm POLYCARBONATE MOUNTING BRACKET FJB30-01(Qty:4pcs per pack) Mounting bracket. UV stabilized polycarbonate. Installs with screws (supplied by others). Please use 4pcs per meter with AL channel. Weight : 3g/PC W x H x L: 33 x 20 x 18 mm 1 Both accessories (channels and brackets) must be used together when installing this product. See INSTALLATION. SYSTEM DIAGRAMS SINGLE RUN LESS THAN 10 METERS (1.25 SQ MM or 16 AWG WIRE) DMX/DALI SYSTEMS 120/240VAC Pink Wire Positive (+) Branch cable not to exceed 10 m Ten (10) meters maximum Third party (supplied by others) DMX/DALI Show Designer(PC) DMX/DALI Show Player Power supply (24VDC) Blue Wire Negative (-) MULTIPLE RUNS GREATER THAN 5 METERS (1.25 SQ MM or 16 AWG WIRE) 120/240VAC Connect to branch cable (supplied by others) using code compliant wiring method such as wire nuts or shrink wrap within optional contractor provided junction box. Pink Wire Positive (+) Branch cable not to exceed 10 m Ten (10) meters maximum Atex DMX/DALI Signal Receiver Red (-) Green (-) Blue (-) DMX/DALI signal via PC or Player (+) (+) (-) Power Supply 24VDC 180W/720W maximum per Signal Receiver See POWER AND CONTROL data sheet for more information. Power supply (24VDC) Blue Wire Negative (-) Connect to branch cable (supplied by others) using code compliant wiring method such as wire nuts or shrink wrap within optional contractor provided junction box. Page 40 Specifications subject to change. Visit for the most current product data A4.

4 INSTALLATION ALUMINUM CHANNEL AND MOUNTING BRACKET Using the recommended aluminum channel (Part No. FAS00-01S/ FAC10-01S) and polycarbonate mounting bracket (Part No. FJB30-01), Long Silicone Light can be securely installed to most surfaces in horizontal or vertical directions. Aluminum channel Pan head screws (M4) 33 mm Flat head screws (M3) Mounting bracket ONE METER EXAMPLE Mounting brackets 125 mm 125 mm Specifications subject to change. Visit for the most current product data A4. Page 41

5 LENGTH ORDER CODE GUIDE (LENGTHS INCLUDE END CAPS. SEE DRAWINGS.) WHITE LED GL10 OUTPUT MODELS CODE MM CODE MM CODE MM CODE MM WHITE LED GL20 OUTPUT AND GL-C MODELS CODE MM CODE MM WHITE LED GL30 OUTPUT AND RGB GL-M(RGB) MODELS CODE MM CODE MM Page 38 Specifications subject to change. Visit for the most current product data A4.