Scoreboard Operator s Instructions MPCX Volleyball Control

Transcription

1 Scoreboard Operator s Instructions MPCX Volleyball Control Since 1934 Retain this manual in your permanent files Rev. 2/3/

2 These Instructions are for the Following Models: LED models: Incandescent models: D A4-D 2500-A A D A A Note: Some features may not be available on some models. May not be compatible with certain older scoreboards Thank You Thank You for choosing NEVCO. We appreciate your business. The following instructions will help you become familiar with the operation and features of the scoreboard system. Please take a few minutes to study this manual, and to practice with the control. If you ever have any questions or comments, please call or us. NEVCO GUARANTEE To view or receive the most recent copy of the Guarantee, please visit our website, or call NEVCO, Inc. 301 East Harris Avenue Greenville, IL USA USA TOLL-FREE CANADA TOLL-FREE International Telephone: Website: info@nevco.com

3 BNC Connector (Signal out to scoreboard) LED Status Indicator (On steady = Power) (Blinking = Signal I/O) Belt Clip Power Input (9 V DC) Not Used Battery Compartment Cover (2 x AA) MPCX CONTROL (rear view) MPCX Receiver HORN PERIOD / SCORE (also functions as Escape) LCD Display (16 characters x 2 lines) Power ON / OFF Switch Selects HOME or GUESTS (for Scoring and for use with Special Multifunction key) Add to or Subtract from the selected feature / also used to select options SET TIME OPTIONS key Allows you to: Clear Scoreboard Set Brightness of Scoreboard Set Direction Timer Will Count Enable / disable Auto Horn Activate Time Of Day (shows on scoreboard when control is off) Check Battery Level Check Signal Strength Turn Security ON/OFF Re-link Control Special Multifunction key Provides access to these features: TEAM SERVING TIMEOUTS LEFT GAMES WON GAME NUMBER TIME ON TIME OFF MPCX VOLLEYBALL CONTROL (front view)

4 TABLE OF CONTENTS QUICK START GUIDE...1 KEYBOARD FUNCTIONS...3 GREETING SCREEN...3 MAIN SCREEN...4 MULTI-FUNCTION SCREEN...6 SET TIME SCREEN...7 OPTIONS MENU...8 SCOREBOARD WITH INNING BY INNING SCORING...11 TROUBLESHOOTING CHART...12

5 QUICK START GUIDE Note: It is assumed here that the control has been linked to the desired receiver(s). This function is explained in the setup guide that comes with a new control. (See page 11 for detailed instructions). It is assumed that the receiver is powered ON. To Start a New Game Press ON/OFF The control will display a greeting while it establishes communications with its receiver(s). (Up to 30 seconds). MPCX Volleyball >>>>> Next the display will show the period, the time status and the score. Note: The cursor indicates the active function. Note: If the receiver has been powered OFF then the scoreboard data will have been cleared. Prd: 3 Time:OFF Home:25 Gst: 22 Press OPTIONS The control will display Clear Scoreboard Press(+) Press to clear the scoreboard data. + The control will display the main screen Prd: 1 Time:OFF Note: The Period is automatically set to 1. Home: Gst: To Set the Time Press SET TIME to set the time (Minutes). Set Time: DN 0:00.0 Use the + or - keys to enter the desired number of minutes. Note: Hold the key down for fast advance. Set Time: DN 12:00.0 Note: You can return to the main screen at any time by pressing PERIOD / SCORE. Prd: 1 Time:OFF Home: Gst: You are now ready for the game to begin. 1

6 To Start the Timer Press TIME ON The control will display Prd: 1 Time:ON Home: Gst: To Stop the Timer Press TIME OFF The control will display Prd: 1 Time:OFF Home: Gst: To Add to the Score Press then or then PERIOD SCORE HOME GUESTS Note: When the scoreboard data is cleared the scores display a blank. Add 1 to display a zero. + Prd: 1 Time:ON Home: 1 Gst: 0 Please consult the following sections of this manual for more details, functions, and features 2

7 KEYBOARD FUNCTIONS GREETING screen MPCX >>>>> Volleyball GREETING When the control is Powered ON, the greeting showing the type of control and the sport is displayed. This greeting continues to be displayed while the control establishes communications with its receiver(s). (May take up to 30 seconds) Accessed by pressing ON/OFF ON/OFF When you are done using the control turn it OFF to conserve batteries. Note: Always power ON the receiver(s) (scoreboard(s)) first, and wait a few seconds for the receiver(s) to initialize (red LED illuminates) before powering ON the control. If the control is already ON, turn it OFF, wait a few seconds, and then turn it back ON. Note: If the scoreboard fails to respond to the control, power the control OFF, wait a few seconds, and then try again. Please allow time for each control to complete its powering ON process (main screen appears) before turning ON another control. 3

8 Prd: 1 Time:OFF Home: 0 Gst: 0 MAIN screen MAIN The main screen shows the Period, the Timer Status, and the Scores. You must use this screen if you want to change the Period or Scores. Press PERIOD / SCORE any time to return to this screen. The cursor indicates the currently selected function. Use the HOME, GUESTS, or PERIOD / SCORE keys to select the function, then, use the + or - keys to change its value and send it to the scoreboard. You should keep this screen displayed during the game. Accessed by pressing PERIOD SCORE PERIOD SCORE HOME Selects the main screen. From this screen use the + or - keys to change the period. Note: The cursor indicates the selected function. Use the Home or Guests keys to select the team whose data you want to change. Prd: 1 Time:OFF Home: 0 Gst: 0 Prd: 1 Time:OFF Home: 0 Gst: 0 GUESTS Prd: 1 Time:OFF Home: 0 Gst: Then use the + or - keys to change the data for the selected feature. Note: Hold the key down for fast advance. Prd: 1 Time:OFF Home: 0 Gst: 1 Note: When the scoreboard data is cleared the scores display a blank. Add 1 to display a zero. 4

9 TIME ON Turns the time ON. Prd: 1 Time:ON Home: 0 Gst: 1 TIME OFF Turns the time OFF. Prd: 1 Time:OFF Home: 0 Gst: 1 HORN Sounds the horn. (Approximately 2 seconds) Note: Does not change the control display. Note: Hold key down to extend duration. Note: If, when the main screen appears, it shows Period 0 and the scoreboard remains dark and does not respond to the control, then the receiver was not found. Power the control OFF, make sure all associated receivers are powered ON, and try the control again. Please allow time for each control to complete its powering ON process (main screen appears) before turning ON another control. Prd: 0 Time:OFF Home: 0 Guest: 0 5

10 Serving MULTI-FUNCTION screen MULTI-FUNCTION This Multi-function screen provides access to Team Serving as well as Timeouts Left, Games Won, and the Game Number. Use the Multi-function key to step thru functions and screens. The cursor will indicate the selected function. Use the HOME or GUESTS keys to select the team. Use the + or - keys to update the selected functions value and send it to the scoreboard. Accessed by pressing SERVING WON GAME SERVING WON GAME This multifunction key is used to access the following functions. Each press of this key moves you to the next function. Note: You can abort the list at any time by pressing PERIOD / SCORE. Serving Use the Home or Guests keys to toggle the serving indicators. H Serving Serving G Timeouts Left Home: Guest: _ Use the Home or Guests keys to select the team, then use the + or - keys to change the data for the selected team. Won Home: _ Guest: Use the Home or Guests keys to select the team, then use the + or - keys to change the data for the selected team. Game: 0 Use the + or - keys to change the Game Number. 6

11 SET TIME screen Set Time: 0:00.0 DN SET TIME This screen is for setting the time. (Timer must be stopped). The cursor indicates the Minutes, Seconds, or Tenths of Seconds as being selected. Use the SET TIME key to step to the desired element of time, then, use the + or - keys to change its value and send it to the scoreboard. (Hold down the + or - keys for fast advance). Note: To change the direction the timer will count, use the OPTIONS menu. Accessed by pressing SET TIME Note: The following key is active only if the time is stopped. Pressing it with time running causes the control to prompt. Time Is Running Stop Time To Set SET TIME Allows you to set the time (Minutes). Use the + or - keys to enter the desired number of minutes. Note: Hold the key down for fast advance. Set Time: 0:00.0 DN Press SET TIME again to set the Seconds: Use the + and - keys to enter the desired number of seconds. Note: Hold the key down for fast advance. Set Time: 0:00.0 DN Press SET TIME again to set the Tenths of a Second: Use the + and - keys to enter the desired number of tenths of a second. Set Time: 0:00.0 DN Note: Some scoreboard models may not display tenths of seconds. Note: Press PERIOD / SCORE any time to return to the normal display. Note: Some timers will display tenths of seconds while others display only whole seconds. In all cases the time is divided into fractions of a second for greater accuracy. It may be possible to start and stop the time and see no change in the displayed time even though several fractions of a second may have been counted off. The fractions of seconds are always cleared when a new time is set. 7

12 Options Menu Several option settings are available to fine tune the scoreboard system to your needs. These settings are saved in the control. They are remembered even if the control is turned OFF or the batteries removed. When a control turns ON the scoreboard, these settings are sent to the scoreboard and are used to define how it operates. This allows each coach or group to have their own control with its unique option choices, thus eliminating the need to set up the options every time the scoreboard is used. For example, Brightness (Baseball day time) (Soccer night time). It is also possible to use more than one control to operate the scoreboard. For instance, the Time can be controlled by one person while someone else operates the rest of the scoreboard with another control. OPTIONS The options key can be used to access the following features. Each press of the options key moves you to the next option screen. Note: In this illustration the cursor indicates the default factory settings. Note: You can return to the main screen at any time by pressing PERIOD / SCORE. Clear Scoreboard Press(+) Allows you to clear (set to zero) the scoreboard data. Note: The period will be set to 1, scores and shots are set to blank. Set Brightness (+)Bright (-)Dim Allows you to select the Brightness Level of the scoreboard. (Bright or Dim) Time Direction (+)Up (-)Down Allows you to set the direction the timer will count. Auto Horn (+)On (-)Off Allows you to enable or disable the automatic horn. (Sounds for about 4 seconds when time has expired). Time Of Day Press(+) Turns the control OFF and blanks all scoreboard functions except Time. Uses the displayed time as the set time if it is a valid Time Of Day. Otherwise blanks the entire scoreboard. Note: Not all scoreboard models support Time Of Day. 8

13 Battery Level L >>>>>> H Reports the condition of the batteries in the control. Signal Strength Press(+) Allows you to check signal strength when connected to a receiver. Used as an indication of reliability of communications. Affected by distance, battery condition, obstructions and signal interference. Signal Strength Signal Strength L >>>>>>>>> H Enter Code to Change Settings This menu option allows you to access settings that affect how the control operates. Generally, these settings need not be changed and should only be changed by an experienced operator or under direction from the Nevco Service Department. Press the following key sequence: HOME + - GUESTS to gain access to the following additional menu items. Or Press the Options key to return to the main screen. 9

14 Security (+)On (-)Off The Security setting is used to allow multiple controls to simultaneously operate the scoreboard. With the Security set to (+)ON, the scoreboard will ignore all other controls and can be operated only by the control that turned it ON. When this control is turned OFF another control can be used to turn the scoreboard ON. Should the batteries go dead or the 1 st control leave the area Power must be cycled to the scoreboard to allow another control to operate the scoreboard. If the Security is set to (-)OFF, multiple controls can be used to operate the same scoreboard or scoreboard system. This allows one person to operate part of the scoreboard, such as the clock, while someone else operates the rest of the scoreboard with another control. Allow each control to establish communications with its receiver(s) (Greeting screen disappears) before powering ON the next control. Note: Set the Security of ALL controls used in a multicontrol system to (-)OFF. Note: All controls need to be configured for the appropriate scoreboard model group and linked to the same receiver(s). Note: The control display will only update when keys are pressed. Note: Make sure all controls of a multi-control scoreboard system are powered OFF before starting the system. Power ON the system receivers, then, power ON the control that will determine the scoreboard attributes (Brightness Level etc.). Next; power ON the remaining controls. Please allow time for each control to complete its powering ON process (main screen appears) before turning ON another control. 10

15 Link Control 0/0 Press (+) This menu option reports the number of receivers the control is currently linked to (0/0), and the number of receivers on its Link To list (0/0). The option also allows you to link a control to a scoreboard (receiver) or group of scoreboards (receivers). This link procedure is required only at the time of installation, when additional controls are added to an existing system, a change to the system configuration is needed, or a control or receiver has been repaired or replaced. An MPCX control can operate up to eight scoreboards (receivers) in a dual type configuration. (All scoreboards must be in the same model series). Procedure to mate a control and receiver(s) Step 1. Insert the batteries included with the MPCX control or turn the control ON by pressing Step 2. Power up one to eight receivers using the 9V wall plug-in power supply provided with the receiver. Because all receivers powered up and within range of this control will be linked to this control with this procedure, power down all receivers not to be mated with new control. Step 3. Press the Options button until the display reads Enter Code to Change Settings ON/ OFF Step 4. Enter the Code with the buttons in the sequence HOME + - Guests Step 5. Continue pressing the button until the display reads Link Control 0/0 Press (+) Step 6. Press the button. The control will link to all receivers in range. + Options Step 7. This process could take as long as 3 minutes. The control will automatically reset when linking is complete and each scoreboard connected to a linked receiver will light. Repeat steps 3 5 in the Re-Mating procedure below to ensure the correct number of receivers are linked indicated by 0/0 on the Link Control screen. The 0/0 on this screen indicates how many receivers are found / how many receivers are linked. If more receivers than intended are linked to the control, then power down any MPCX receivers in the area that are within 2000 and repeat the process. If you cannot find these receivers, or they are located on an adjacent property, you may have to perform this process in another location. This process creates a list of receivers in the control. The control can only communicate with receivers on this list. The list remains intact even if the batteries are removed from the control. During normal operation (with any or all receivers ON), when you turn the control on, it searches for receivers on its list and the scoreboard(s) will light. Note: During normal operation, the receiver should always be powered ON before the control. In a multi-control system, the controls must be powered ON and allowed to find the receiver one at a time. Wait about 30 seconds between powering-up controls. 11

16 TROUBLESHOOTING CHART Problem Cause Solution Scoreboard will not turn ON when control is turned ON Control continues to search after an unusually long time Data won t change on control Control display shows incorrect information Control is ON but scoreboard is OFF (data is changing on control) Scoreboard is ON but does not respond to control My control will not operate the scoreboard (1 st control has left area, scoreboard is ON) Receiver not working Control signal weak Check signal strength (see Options menu) Check LED status indicator on receiver (on solid = power, blinking when key is pressed on control = has signal I/O) Battery level low Control in a poor location Control is linked to extra unwanted receivers or wanted receivers are not powered ON. Control is not linked to this scoreboard Didn t sync up No power to scoreboard Bad connection between Receiver and scoreboard module Control and receiver are not communicating Scoreboard was left with security ON Replace batteries Restore power to receiver Make sure the control is in clear line of sight of the scoreboard Move closer to scoreboard Use the Options Menu to check the number of receivers the control is linked to and the number of receivers on its list. Find and use the control for this scoreboard. Link the control to this scoreboard or group (see Options Menu) Power control OFF, then ON Check all switches, breakers, and fuses Check all cables and connections Turn control OFF, then ON to establish communications Cycle power to receiver I cannot set the time The time is running Stop the time first Cannot turn the time ON Scoreboard is ON Control is OFF Only one control of a multi-control scoreboard system will operate the scoreboard Time at 0.0 and set to count down Batteries were removed while scoreboard ON One or more of the controls has its Security set to (+)ON Set some time on the clock or change timer direction to UP count Install batteries -- power ON then OFF Cycle power at scoreboard Set the Security of ALL controls used in a multi-control system to (-)OFF (See the Options Menu) Scoreboard is being controlled by more than one control Cannot turn OFF all receivers within operating range. (Linking procedure) Security is set to (-) OFF. Note: The scoreboard assumes the security level of the control that turns it ON. Another nearby organization also has an MPCX control system. (a) In the Options Menu, set the Security to (+) ON. (b) Turn the receiver and control OFF. (c) Turn the receiver ON. (d) Turn the control ON. Move the receivers to an isolated area for Linking. If the problem persists please contact the Nevco Service Department

17 Features Specifications MPCX Control: Size: o Small and light weight (fits in or clips to pocket) Approximately 3¼ x 5½ x 7 / 8 o Tactile confirmation of key pressed Weight: o High visibility transflective display 5½ oz. (including batteries) o Convenient wireless operation Keypad: o Built in wireless signal strength meter 12 keys o Power conservation circuitry Display: o Built in battery meter 32 character LCD o Long battery life Power requirements: o Uses inexpensive, readily available AA batteries Two AA cells (included) o Sealed keyboard Operating distance: o No slip grip 1000 feet (Clear line of sight) o Ergonomic single hand operation Receiver Output: o Internal antenna One BNC connector (2 loads with up to 1000 ft. coax each) o Mate multiple controls to same scoreboard Operating temperature: o Operate dual scoreboards 0 F to 150 F o Retrofits to existing wired installations Certifications: FCC part 15 Class B CE RoHS NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. The user is cautioned that changes and modifications made to the equipment without the approval of Nevco could void the user s authority to operate this equipment. This class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations. Cet appareil numerique de la classe B repecte toutes les exigences du Reglement sure le materiel brouller du Canada. WARNING: To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter. 13