3 -color/2 -screen display

Size: px
Start display at page:

Download "3 -color/2 -screen display"

Transcription

1 3-Color Display Digital Flow Switch for Water 4 3 -color/2 -screen display 4 Excludes -X445 IP65 Main screen Sub screen 3 Main screen Sub screen 3 Instantaneous flow rate 1 Set value ccumulated value Peak/Bottom value Instantaneous flow rate 1 Line name 1 Main screen shows the instantaneous flow rate only. 2 Fluid temperature can be displayed only when the digital flow switch with a temperature sensor is selected. 3 Sub screen can be turned off. Fluid temperature 2 compatible products have been added to the integrated display type. p. 16 Made to order 7 -X445 Integrated flow adjustment valve and temperature sensor Flow adjustment valve Remote type PVC piping type Remote sensor unit Temperature sensor Series Remote type 3-color display Digital flow monitor pplicable fluid: Deionized water, chemical liquids, etc. Integrated type and remote type added to series CT.ES1-8D

2 Digital Flow Switch for Water 4% smaller than the current product Reduced required piping space Shortened 5 3 PF2W74-3 (Current product) Straight piping length PF2W74 1 Current product requires a straight piping length of at least 8 times the piping diameter. Refer to straight piping length and accuracy on pages 9 and 19. Flow adjustment valve Temperature sensor 1 to 11 C Display range: Space saving with reduced piping labor (Temperature sensor alone) 1 Smallest settable increment: C nalog output: Current output/voltage output Temperature sensor Temperature display Fluid temperature: to 9 C Ethylene glycol aqueous solution can be used. Example) Flow control of the circulating fluid in a chiller User s equipment Rotatable display Display can be rotated in increments of 45 to suit the installation conditions. Easy operation, improved visibility Counterclockwise 9 Clockwise 225 IN 135 turn OUT OUT (No rotation) Non-grease OUT IN IN 18 turn Mounting Bracket mounting Direct mounting Panel mounting Front protective cover Tapping screw (4 pcs.) 1 9 turn Panel mount adapter Waterproof seal (ccessory) Panel Mounting screw (M3 x 8 L) (ccessory)

3 dded: Measured flow rate Variations Type pplicable fluid Integrated Water Ethylene glycol aqueous solution Remote Sensor Monitor PVC piping type Integrated Deionized water Remote Chemical liquids Sensor Monitor 3-color display to up to 1 Series 25 L/min type Rated flow range [L/min] Flow adjustment valve/temperature sensor Flow adjustment valve None Temperature sensor Port size Rc, NPT, G Flow adjustment valve + Temperature sensor.5 to 4 3/8 2 to 16 3/8, 1/2 5 to 4 1/2, 3/4 1 to 1 3/4, 1 5 to , 11 1 to to Digital flow monitor: The set value can be copied flow monitors simultaneously. The settings of the master monitor (source of copy) can be copied to the slave monitors. setting labor Minimized risk of setting mistakes Copy Reduced Master monitor (Source of copy) Indicator Visually check the status of the sensor via the indicator. Slave side (Copy destination) / 1 unit Connector reduces wiring labor 2 units 1 units PVC piping type e-con connector: No tools or peeling required. M8 connector Wetted Parts Flow rate: High Blinking green/fast Flow rate: Low Blinking green/slow Rated flow or less OFF Rated flow or more Red ON Pipe CPVC (Heat-resistant PVC) Body PPS Power supply/output connection lead wire Seal FKM 2

4 Digital Flow Switch for Water IO-Link Compatible 7 -X445 p. 16 Supports the IO-Link communication protocol Configuration File (IODD File*1 ) Manufacturer Product part no. Set value IO-Link is an open communication interface technology between the sensor/ actuator and the I/O terminal that is an international standard, IEC PLC Fieldbus PC *1 IODD File: IODD is an abbreviation of IO Device Description. This file is necessary for setting the device and connecting it to a master. Save the IODD file on the PC to be used to set the device prior to use. Device settings can be set by the master. Threshold value Operation mode, etc. IO-Link Master Read the device data. Switch ON/OFF signal and analog value Device information: Manufacturer, Product part number, Serial number, etc. Normal or abnormal device status Cable breakage IO-Link Compatible Device: Digital Flow Switch for Water Implement diagnostic bits in the process data. The diagnostic bit in the cyclic process data makes it easy to find problems with the equipment. It is possible to find problems with the equipment in real time using the cyclic (cycle) data and to monitor such problems in detail with the noncyclic (aperiodic) data. Process Data Bit offset Item Note OUT1 output : OFF 1: ON 1 OUT2 output : OFF 1: ON 8 Diagnosis (error) : OFF 1: ON 9 Diagnosis (flow rate) : OFF 1: ON 1 Diagnosis (temperature) : OFF 1: ON 16 to 31 Measured temperature value Signed 16 bit 32 to 47 Measured flow rate value Signed 16 bit Diagnosis items Over current error bove the rated flow range ccumulated flow error bove the rated temperature range Below the rated temperature range Internal product malfunction Temperature sensor failure Bit offset Item Measured flow rate value (PD) Bit offset Item Measured temperature value (PD) Bit offset Item Reservation Temperature Flow rate Error Reservation OUT2 OUT1 Diagnosis Switch output pplication Examples For the predictive maintenance of cooling water problems Monitors flow rate and temperature s switch ON/ OFF signals and analog values to determine the cooling status The process and cooling status can be compared. Chiller Digital flow switch for water User s equipment Display function Displays the output communication status and indicates the presence of communication data SIO mode Start-up mode Preoperate mode Operate mode Operation and Display Communication with master IO-Link status indicator light Status Screen display Description 1 Operate Normal communication status (readout of measured value) Normal Start up Preoperate t the start of communication Yes 1 IO-Link mode Version does not match The IO-Link version does not match that of the master. The master uses version 1.. (Flashing) bnormal Lock Backup and restore required due to data storage lock. No Communication disconnection Normal communication was not received for 1 second or longer. OFF SIO mode General switch output *1 In IO-Link mode, the IO-Link indicator will be ON or flashing. 3

5 CONTENTS 3-Color Display Digital Flow Switch for Water Series 3-Color Display Digital Flow Switch for PVC Piping Series 3-Color Display Digital Flow Monitor for Water 3 Series 3-Color Display Digital Flow Switch for Water Series How to Order... p. 5 Specifications (Integrated Display)... p. 6 Specifications (Remote Sensor Unit)... p. 7 Temperature Sensor Specifications... p. 6, 7 Set Flow Range and Rated Flow Range... p. 7 nalog Output... p. 8 Operating Pressure and Proof Pressure... p. 8 Flow Rate Characteristics (Pressure Loss: Without Flow djustment Valve)... p. 9 Straight Piping Length and ccuracy (Reference Value)... p. 9 Flow Rate Characteristics of Flow djustment Valve... p. 1 Measurable Range for Ethylene Glycol queous Solution (Reference Value)... p. 1 Wetted Parts Construction... p. 1 Internal Circuits and Wiring Examples... p. 11 Dimensions... p. 12 Made to Order EPDM seal material (-X19)... p. 15 nalog 4 to 2 m 2-output type (-X128)... p. 15 Brass piping material specification (-X143)... p. 15 IO-Link compatible (-X445)... p Color Display Digital Flow Switch for PVC Piping Series How to Order... p. 17 Specifications (Integrated Display)... p. 18 nalog Output... p. 18 Operating Pressure and Proof Pressure... p. 18 Specifications (Remote Sensor Unit)... p. 19 Flow Rate Characteristics (Pressure Loss)... p. 19 Straight Piping Length and ccuracy (Reference Value)... p. 19 Wetted Parts Construction... p. 2 Internal Circuits and Wiring Examples... p. 11 Dimensions... p. 21 Made to Order EPDM seal material (-X19)... p Color Display Digital Flow Monitor for Water 3 Series How to Order... p. 24 Specifications... p. 25 nalog Output... p. 25 Internal Circuits and Wiring Examples... p. 26 Dimensions... p. 27 Function Details... p. 28 pplicable Fluids... p. 31 Safety Instructions... Back cover 3-Color Display Digital Flow Switch for Water 3-Color Display Digital Flow Switch for PVC Piping 3-Color Display Digital Flow Monitor for Water 3 Function Details 4

6 Remote sensor unit Integrated display 1 External input: The accumulated value, peak value, and bottom value can be reset. 2 For units with temperature sensor, only OUT2 can be set as either temperature output or flow rate output. Setting when shipped is for temperature output. Options/Part Nos. 3-Color Display Digital Flow Switch for Water Series Type 5 Remote sensor unit 7 Integrated display 1 and 25 L/min types with flow adjustment valves are not available. The flow adjustment valve of this product is not suitable for applications which require constant adjustment of flow rate. How to Order Remote sensor unit Output specification/temperature sensor OUT1 OUT2 Temperature For how to order of Symbol Flow rate Temperature sensor remote monitor unit, 1 nalog 1 to 5 V refer to page 24. None 2 nalog 4 to 2 m 1T nalog 1 to 5 V nalog 1 to 5 V With temperature sensor Symbol With/without flow adjustment valve To use in combination with remote monitor (3 series), select analog output of 1 to 5 V of flow rate (output symbol -1 or -1T ). nalog output of 4 to 2 m with temperature sensor is made to order. (Refer to page 15.) T Rated flow range (Flow range) Symbol Rated flow range 4.5 to 4 L/min 2 2 to 16 L/min 4 5 to 4 L/min 11 1 to 1 L/min 21 5 to 25 L/min Flow adjustment valve Rated flow range Nil None S Yes T M Symbol Port size Thread type Nil Rc N NPT F G 1 1 ISO 228 equivalent Port size Rated flow range /8 4 1/2 6 3/4 1 1/ / /2 Integrated display Output specification/temperature sensor OUT1 OUT2 Temperature Symbol Flow rate Flow rate Temperature sensor NPN NPN B PNP PNP C NPN nalog 1 to 5 V D NPN nalog 4 to 2 m E PNP nalog 1 to 5 V None F PNP nalog 4 to 2 m G NPN External input 1 H PNP External input 1 T NPN (NPN) 2 NPN BT PNP (PNP) 2 PNP CT NPN (nalog 1 to 5 V) 2 nalog 1 to 5 V DT NPN (nalog 4 to 2 m) 2 nalog 4 to 2 m ET PNP (nalog 1 to 5 V) 2 nalog 1 to 5 V FT PNP (nalog 4 to 2 m) 2 nalog 4 to 2 m With temperature sensor When only optional parts are required, order with the part numbers listed below. Description Part no. Qty. Note ZS-4-K 1 For 74/72/54/52 With 4 tapping screws (3 x 8) Bracket 1 ZS-4-L 1 For 74/54 With 4 tapping screws (3 x 8) ZS-4-M 1 For 711/511 With 4 tapping screws (4 x 1) Lead wire with M8 connector ZS-4-1 Lead wire length: 3 m 1 For units with flow adjustment valve, 2 brackets are required. 5 Remote sensor unit/unit printed on label Symbol Instantaneous flow Temperature Nil L/min C G 1 L/min (gal/min) C/ F 1 Under the New Measurement ct, units other than SI (symbol Nil ) cannot be used in Japan. G: Made to order Reference: 1 [L/min].2642 [gal/min] 1 [gal/min] [L/min] F = 9/5 C + 32 Calibration certificate (Only for flow rate) Nil None With calibration certificate The certificate is written in both Japanese and English. The integrated display type with temperature sensor can only display the flow rate. Made to order X19 EPDM seal material X128 nalog 4 to 2 m 2-output type 1 X143 Brass piping material specification X445 IO-Link compatible 2 1 pplicable only for remote type with temperature sensor (Refer to page 15.) 2 Integrated display type only Bracket (Option) Nil None With bracket R Bracket is not available for 25 L/min type. Integrated display/unit specification Symbol Instantaneous flow ccumulated flow Temperature M L/min L C G gal/min gal C F gal/min gal F J L/min L F Under the New Measurement ct, units other than SI (symbol M ) cannot be used in Japan. G, F, J: Made to order Reference: 1 [L/min].2642 [gal/min] 1 [gal/min] [L/min] F = 9/5 C + 32 Lead wire (Option) Nil N With lead wire with M8 Without lead wire connector with M8 (3 m) connector

7 3-Color Display Digital Flow Switch for Water Series Specifications (Integrated Display) For flow switch precautions and specific product precautions, refer to the Operation Manual on the SMC website. Model pplicable fluid Water and ethylene glycol aqueous solution (with viscosity of 3 mpa s [3 cp] or less) 1 Detection method Karman vortex Rated flow range.5 to 4 L/min 2 to 16 L/min 5 to 4 L/min 1 to 1 L/min 5 to 25 L/min Display flow range.35 to 5.5 L/min 1.7 to 22. L/min 3.5 to 55. L/min 7 to 14 L/min 2 to 35 L/min (Flow under.35 L/min is displayed as. ) (Flow under 1.7 L/min is displayed as. ) (Flow under 3.5 L/min is displayed as. ) (Flow under 7 L/min is displayed as ) (Flow under 2 L/min is displayed as ) Set flow range.35 to 5.5 L/min 1.7 to 22. L/min 3.5 to 55. L/min 7 to 14 L/min 2 to 35 L/min Smallest settable increment.1 L/min.1 L/min 1 L/min 2 L/min Conversion of accumulated pulse (Pulse width: 5 ms).5 L/pulse.1 L/pulse.5 L/pulse 1 L/pulse 2 L/pulse Fluid temperature to 9 C (No freezing or condensation) to 7 C (No freezing or condensation) Display unit Instantaneous flow: L/min, ccumulated flow: L ccuracy Display value: ±3% F.S. nalog output: ±3% F.S. Repeatability ±2% F.S. 2 Temperature characteristics ±5% F.S. (25 C standard) Operating pressure range 3 to 1 MPa Proof pressure MPa Pressure loss (without flow adjustment valve) 45 kpa or less at the maximum flow 6 kpa or less at the maximum flow L L ccumulated flow range 4 By.1 L By.5 L By 1 L Switch output NPN or PNP open collector output Max. load current 8 m Max. applied voltage 28 VDC Internal voltage drop NPN: 1 V or less (at load current of 8 m) PNP: 1.5 V or less (at load current of 8 m) Response time 2, 5.5 s/1 s/2 s Output protection Short-circuit protection Output Flow rate Select from Hysteresis, Window comparator, ccumulated output, or ccumulated pulse output modes. mode Temperature Select from Hysteresis mode or Window comparator mode. Response time 6.5 s/1 s/2 s (linked with the switch output) nalog output Voltage output Voltage output: 1 to 5 V Output impedance: 1 kω Current output Output current: 4 to 2 m Max. load impedance: 3 Ω for 12 VDC, 6 Ω for 24 VDC Hysteresis Variable External input Voltage free input:.4 V or less (Reed or Solid state), input for 3 ms or longer Display method 2-screen display (Main screen: 4-digit, 7-segment, 2-color, Red/Green Sub screen: 6-digit, 11-segment, White) Display values updated 5 times per second Indicator light Output 1, Output 2: Orange Power supply voltage 12 to 24 VDC ±1% Current consumption 5 m or less Enclosure IP65 Operating temperature range to 5 C (No freezing or condensation) Environment Operating humidity range Operation, Storage: 35 to 85% R.H. (No condensation) Withstand voltage 7 1 VC for 1 minute between terminals and housing Insulation resistance 5 MΩ or more (5 VDC measured via megohmmeter) between terminals and housing Standards and regulations CE marking, UL (CS), RoHS Wetted parts material 8 PPS, Stainless steel 34, FKM, SCS13 Non-grease Piping port size 9 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 1 1/4, 1 1/2 Without temperature sensor/without flow adjustment valve 21 g 26 g 41 g 72 g 89 g With temperature sensor/without flow adjustment valve 285 g 335 g 53 g 86 g 175 g Without temperature sensor/with flow adjustment valve 31 g 36 g 61 g With temperature sensor/with flow adjustment valve 385 g 435 g 73 g With lead wire with connector +85 g 1 Refer to the graph of measurable range for ethylene glycol aqueous solution on page 1. Measurement is possible as long as the fluid does not corrode the wetted parts and viscosity is 3 mpa s (3 cp) or less. Be aware that water leakage may occur due to internal seal shrinkage or swelling depending on the type of fluid. 2 If.5 s is selected for the response time of the switch output, the repeatability will be ±3% F.S. 3 The operating pressure range and proof pressure may change according to the fluid temperature. Refer to the graphs on page 8. 4 Cleared when the power supply is turned off. The hold function can be selected. (Intervals of 2 or 5 minutes can be selected.) If the 5-minute interval is selected, the life of the memory element (electronic parts) is limited to 1 million times. (If energized for 24 hours, life is calculated as 5 minutes x 1 million = 5 million minutes = about 9.5 years.) Therefore, if using the hold function, calculate the memory life for your operating conditions, and use within this life. 5 The response time when the set value is 9% in relation to the step input (The response time is 7 s when it is output by the temperature sensor.) 6 The response time until the set value reaches 9% in relation to the step input (The response time is 7 s when it is analog output by the temperature sensor.) 7 When the temperature sensor is used, it will be 25 VC. 8 For details, refer to Wetted Parts Construction on page 1. 9 When the piping diameter or piping passage is restricted, the specifications may not be satisfied. Products with tiny scratches, marks, or display color or brightness variations which do not affect the performance of the product are verified as conforming products. Weight Temperature Sensor Specifications Rated temperature range to 1 C 1 Set/Display temperature range 1 to 11 C Smallest settable increment 1 C Display unit C Display accuracy ±2 C nalog output accuracy ±3% F.S. Response time 7 s 2 mbient temperature characteristics ±5% F.S. 1 The rated temperature range refers solely to that of the temperature sensor. The fluid temperature range specification of the flow switch as a whole is to 9 C. 2 The response time refers solely to that of the temperature sensor. The output related to the temperature sensor is OUT2 only. Flow rate detecting circuit Temperature detecting circuit Main circuit OUT1 Switch output OUT2 Switch output nalog output Brown DC (+) Black OUT1 White OUT2 Blue DC ( ) The OUT2 can be selected from either the output for temperature or flow rate by button operation. 6 3-Color Display Digital Flow Switch for Water 3-Color Display Digital Flow Switch for PVC Piping 3-Color Display Digital Flow Monitor for Water 3 Function Details

8 Series For flow switch precautions and specific product precautions, refer to the Operation Manual on the SMC website. Specifications (Remote Sensor Unit) Refer to page 25 for monitor unit specifications. Model pplicable fluid Water and ethylene glycol aqueous solution (with viscosity of 3 mpa s [3 cp] or less) 1 Detection method Karman vortex Rated flow range.5 to 4 L/min 2 to 16 L/min 5 to 4 L/min 1 to 1 L/min 5 to 25 L/min Fluid temperature to 9 C (No freezing or condensation) to 7 C (No freezing or condensation) ccuracy ±3% F.S. Repeatability ±2% F.S. Temperature characteristics ±5% F.S. (25 C standard) Operating pressure range 2 to 1 MPa 2 Proof pressure MPa Pressure loss (without flow adjustment valve) 45 kpa or less at the maximum flow 6 kpa or less at the maximum flow Response time 3 1 s nalog output Voltage output Voltage output: 1 to 5 V Output impedance: 1 kω Current output Output current: 4 to 2 m Max. load impedance: 3 Ω for 12 VDC, 6 Ω for 24 VDC Indicator light For power supply status, flow rate indicator (Blinking speed changes in response to flow rate.), and other error indicator Power supply voltage 12 to 24 VDC ±1% Current consumption 3 m or less Enclosure IP65 Operating temperature range to 5 C (No freezing or condensation) Environment Operating humidity range Operation, Storage: 35 to 85% R.H. (No condensation) Withstand voltage 4 1 VC for 1 minute between terminals and housing Insulation resistance 5 MΩ or more (5 VDC measured via megohmmeter) between terminals and housing Standards and regulations CE marking, UL (CS), RoHS Wetted parts material 5 PPS, Stainless steel 34, FKM, SCS13 Non-grease Piping port size 6 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 1 1/4, 1 1/2 Without temperature sensor/without flow adjustment valve 195 g 245 g 395 g 75 g 875 g With temperature sensor/without flow adjustment valve 27 g 32 g 515 g 84 g 16 g Without temperature sensor/with flow adjustment valve 295 g 345 g 595 g With temperature sensor/with flow adjustment valve 37 g 415 g 715 g With lead wire with connector +85 g Weight Temperature Sensor Specifications 1 Refer to the graph of measurable range for ethylene glycol aqueous solution on page 1. Measurement is possible as long as the fluid does not corrode the wetted parts and viscosity is 3 mpa s (3 cp) or less. Be aware that water leakage may occur due to internal seal shrinkage or swelling depending on the type of fluid. 2 The operating pressure range and proof pressure may change according to the fluid temperature. Refer to the graphs on page 8. 3 The response time until the set value reaches 9% in relation to the step input (The response time is 7 s when it is analog output by the temperature sensor.) 4 When the temperature sensor is used, it will be 25 VC. 5 For details, refer to Wetted Parts Construction on page 1. 6 When the piping diameter or piping passage is restricted, the specifications may not be satisfied. Products with tiny scratches, marks, or display color or brightness variations which do not affect the performance of the product are verified as conforming products. Rated temperature range nalog output accuracy Response time mbient temperature characteristics to 1 C 1 ±3% F.S. 7 s 2 ±5% F.S. 1 The rated temperature range refers solely to that of the temperature sensor. The fluid temperature range specification of the flow switch as a whole is to 9 C. 2 The response time refers solely to that of the temperature sensor. Caution Sensor Set Flow Range and Rated Flow Range Set the flow rate within the rated flow range. The set flow range is the range of flow rate within which setting is possible. The rated flow range is the range within which the sensor specifications (accuracy, etc.) are satisfied. It is possible to set a value outside of the rated flow range if it is within the set flow range. However, the satisfaction of the specifications cannot be guaranteed. Flow range.5 L/min 2 L/min 5 L/min 2 L/min 4 L/min 1 L/min 14 L/min 25 L/min 35 L/min.5 L/min 4 L/min 5.5 L/min 5.5 L/min.35 L/min.35 L/min 2 L/min 1.7 L/min 1.7 L/min 5 L/min 3.5 L/min 3.5 L/min 1 L/min 7 L/min 7 L/min 2 L/min 2 L/min 2 L/min 2 L/min 16 L/min 22 L/min 22 L/min 5 L/min 5 L/min 4 L/min 55 L/min 55 L/min 1 L/min 14 L/min 14 L/min 25 L/min 25 L/min 28 L/min 28 L/min 35 L/min 35 L/min For the 5 series, the display flow range and set flow range are the same as those of the flow monitor 3 series. 7 Rated flow range Display flow range Set flow range

9 3-Color Display Digital Flow Switch for Water Series nalog Output Flow rate/nalog output B C Output 4/16/ C Voltage output 1 V 1.5 V 1.4 V 1.8 V 5 V Current output 4 m 6 m 5.6 m 7.2 m 2 m Model Rated flow [L/min] Minimum Maximum 74/ / / / / Minimum rated flow Operating Pressure and Proof Pressure B MaximumFlow rate rated flow Fluid temperature/nalog output 7/5 Output B Voltage output.6 V 1 V Current output 2.4 m 4 m C D Voltage output 5 V 5.4 V Current output 2 m 21.6 m D C B 1 C C 1 C 11 C Fluid temperature 3-Color Display Digital Flow Switch for Water 74/72/74/54/52/54 Pressure [MPa] 711/511 Pressure [MPa] Proof pressure [MPa] Operating pressure [MPa] Fluid temperature [ C] Proof pressure [MPa] Operating pressure [MPa] Fluid temperature [ C] 74S/72S/74S/54S/52S/54S Pressure [MPa] /521 Pressure [MPa] Proof pressure [MPa] Operating pressure [MPa] Fluid temperature [ C] Operating pressure/ Proof pressure [MPa] Fluid temperature [ C] 3-Color Display Digital Flow Switch for PVC Piping Function Details 3-Color Display Digital Flow Monitor for Water 3 8

10 Series Flow Rate Characteristics (Pressure Loss: Without Flow djustment Valve) 74/54 72/52 74/ Pressure loss [MPa] Pressure loss [MPa] Pressure loss [MPa] Flow rate [L/min] 711/ Flow rate [L/min] 721/ Flow rate [L/min].4.5 Pressure loss [MPa] Pressure loss [MPa] Flow rate [L/min] Flow rate [L/min] Straight Piping Length and ccuracy (Reference Value) Straight piping length The smaller the piping size, the more the product is affected by the straight piping length. Fluid pressure has almost no affect. Low flow rate lessens the effect of the straight piping length. Use a straight pipe that is 8 cm or longer in length to satisfy the ±3% F.S. specification. (11 cm or longer for 1 L/min and 25 L/min types) Pressure:.3 MPa Pressure:.3 MPa 74/54 Piping diameter: ø12 72/52 Piping diameter: ø12 74/54 ±1 ±9 ±8 ±7 ±6 ±5 74/54-3 (at 4 L/min) ±4 ±3 ±2 ±1 ± Straight piping length [cm] Pressure:.3 MPa Piping diameter: 25 (Port size 1) 711/511 2 (Port size 6) ccuracy [% F.S.] ccuracy [% F.S.] ±16 ±14 ±12 ±1 ±8 ±6 ±4 ±2 711/511-6 (at 5 L/min) 711/511-6 (at 1 L/min) 711/511-1 (at 1 L/min) 711/511-1 (at 5 L/min) ccuracy [% F.S.] Straight piping length [cm] Pressure:.3 MPa Piping diameter: 32 (Port size 12) 721/521 4 (Port size 14) ccuracy [% F.S.] ±1 ±9 ±8 ±7 ±6 ±5 ±4 ±3 ±2 ±1 ± ±1 ±9 ±8 ±7 ±6 ±5 ±4 ±3 ±2 ±1 72/52-3 (at 16 L/min) 72/52-4 (at 16 L/min) 72/52-3 (at 8 L/min) 721/ (at 25 L/min) 721/ (at 25 L/min) ccuracy [% F.S.] Pressure:.3 MPa Piping diameter: ø16 ±1 ±9 ±8 ±7 ±6 ±5 74/54-4 (at 4 L/min) ±4 ±3 ±2 74/54-6 (at 4 L/min) ±1 ± Straight piping length [cm] ± Straight piping length [cm] No data for 4 cm, or for under 5 cm, as these cannot be used due to piping dimensions. 9 ± Straight piping length [cm]

11 3-Color Display Digital Flow Switch for Water Series Flow Rate Characteristics of Flow djustment Valve 74S/54S 72S/52S 74S/54S Flow rate [L/min] P =.4 MPa P =.3 MPa P =.2 MPa P =.1 MPa P =.5 MPa Number of rotations P: Pressure differential between the front and the rear of product Measurable Range for Ethylene Glycol queous Solution (Reference Value) Flow rate [L/min] P =.3 MPa 5. P =.5 MPa P =.4 MPa P =.2 MPa P =.1 MPa Number of rotations P: Pressure differential between the front and the rear of product Flow rate [L/min] P =.5 MPa P =.4 MPa P =.3 MPa P =.2 MPa P =.1 MPa Number of rotations P: Pressure differential between the front and the rear of product 3-Color Display Digital Flow Switch for Water queous solution concentration [%] (Weight) Measurable within this range queous solution temperature [ C] Wetted Parts Construction q r w o i t w e y w u w Component Parts No. Description Material Note 1 ttachment SCS13 Stainless steel 34 equivalent 74/72/74/711/54/52/54/511 Stainless steel /521 2 Seal FKM 3 Body PPS 4 Sensor PPS 5 Temperature sensor With brazing Stainless JIS Z 3261: Bg-7, steel 34 ISO 3677: B-g56CuZnSn-62/65 6 Temperature sensor body Stainless steel 34 7 Flow adjustment valve body PPS 8 Flow adjustment valve cover PPS 9 Flow adjustment valve shaft Stainless steel 34 1 Shaft support PPS 11 Y seal FKM 12 Cap seal FKM!2!1 w! ( ) 1 3-Color Display Digital Flow Switch for PVC Piping 3-Color Display Digital Flow Monitor for Water 3 Function Details

12 U U Series Internal Circuits and Wiring Examples 7 -(T) NPN (2 outputs) -E(T)/F(T) E(T): PNP + nalog voltage output F(T): PNP + nalog current output Main circuit Black OUT1 White OUT2 Blue DC( ) + 12 to 24 VDC Main circuit Black OUT1 White nalog output Blue DC( ) + 12 to 24 VDC -B(T) PNP (2 outputs) -G NPN + External input Main circuit Black OUT1 White OUT2 Blue DC( ) + 12 to 24 VDC Main circuit Black OUT1 White External input Blue DC( ) + 12 to 24 VDC -C(T)/D(T) C(T): NPN + nalog voltage output D(T): NPN + nalog current output -H PNP + External input Main circuit Black OUT1 White nalog output Blue DC( ) + 12 to 24 VDC Main circuit Black OUT1 White External input Blue DC( ) + 12 to 24 VDC ccumulated pulse output wiring examples -(T)/C(T)/D(T)/G (T): NPN (2 outputs) C(T), D(T): NPN + nalog output G: NPN + External input Black OUT1 Max. 28 V 8 m -B(T)/E(T)/F(T)/H B(T): PNP (2 outputs) E(T), F(T): PNP + nalog output G: PNP + External input White OUT2 (7 - -(T)- only) Blue DC( ) Black OUT1 White OUT2 (7 - -B(T)- only) Max. 8 m V or 5 ms 5 ms V or 5 ms 5 ms 5-1/2 1: nalog voltage output 2: nalog current output -1T nalog voltage output (With temperature sensor output) Main circuit 1 kω Black 1 to 5 V/4 to 2 m White N.C. Blue DC( ) + 12 to 24 VDC Main circuit 1 kω 1 kω Black 1 to 5 V Temperature sensor White 1 to 5 V Blue DC( ) + 12 to 24 VDC 11

13 3-Color Display Digital Flow Switch for Water Series Dimensions 74/72/74/711/721 Integrated display Connector pin number Example 3 4 For Pin no. Pin name 1 DC (+) 2 OUT2 3 DC ( ) 4 OUT1 G Z Y D 1.4 E F 2 x Piping port B 3 5 S (35.5) H J T U 42 4 x WX V W 3-Color Display Digital Flow Switch for Water IN OUT G 54/52/54/511/521 Remote sensor unit For 521 Model G G 2 x Piping port G Port size (Rc, NPT, G) 2 x Piping port G Z Y F DD E 2 x Piping port B D DD E F G H J K L N P B IN N 3 N K S (35.5) J L T U H 42 K L 4 x P 4 x WX 4 x P V W OUT [mm] Bracket dimensions S T U V W WX Y Z 74/54 3/ ø2.7 depth /52 3/8, 1/ ø2.7 depth /54 1/2, 3/ ø2.7 depth /511 3/4, ø3.5 depth /4, 1 1/ /521 G1 1/ ø3.5 depth 14 G1 1/ Color Display Digital Flow Switch for PVC Piping 3-Color Display Digital Flow Monitor for Water 3 Function Details

14 Series Dimensions 74/72/74/711/ T Integrated display: With temperature sensor 54/52/54/511/ T Remote sensor unit: With temperature sensor [mm] Model 74/54- - T /52- - T /54- - T / T / T /521-F12- T /521-F14- T S/72S/74S Integrated display: With flow adjustment valve D S T 54S/52S/54S Remote sensor unit: With flow adjustment valve D S T Q Q B F K L 4 x P N B F K L 4 x P N Model B D F K L N P Q of Q rotations number Bracket dimensions S T 74S/54S (Max. 68.6) ø2.7 depth 1 ø S/52S (Max. 68.6) ø2.7 depth 1 ø S/54S (Max. 81) ø2.7 depth 1 ø [mm]

15 3-Color Display Digital Flow Switch for Water Series Dimensions 74S/72S/74S- - T Integrated display: With temperature sensor and flow adjustment valve D S 54S/52S/54S- - T Remote sensor unit: With temperature sensor and flow adjustment valve D S 3-Color Display Digital Flow Switch for Water K 11 [mm] K 11 3-Color Display Digital Flow Switch for PVC Piping Model D K S 74S/54S- - T S/52S- - T S/54S- - T ZS-4- Lead wire with M8 connector (Black) 4 (Blue) 3 M8 2 (White) 1 (Brown) Pin no. Pin name Wire color 1 DC (+) Brown 2 OUT2 White 3 DC ( ) Blue 4 OUT1 Black ø1 (32.8) ø4 (3) 4-wire type lead wire with M8 connector used for the series For wiring, refer to the Operation Manual on the SMC website ( (45) (15) Lead Wire Specifications Nominal cross Conductor section WG23 O.D. pprox..7 mm Material Heat-resistant PVC Insulator O.D. pprox. 1.1 mm Color Brown, White, Black, Blue Sheath Material Heat- and oil-resistant PVC Finished O.D. ø4 3-Color Display Digital Flow Monitor for Water 3 Function Details 14

16 Series Made to Order Please contact SMC for detailed dimensions, specifications, and lead times. 1 EPDM seal material Seal material for wetted parts changed to EPDM Symbol -X X19 X19 EPDM seal material Refer to page 5 for details of How to Order. Not compatible with units with flow adjustment valve Please special-order separately. 2 nalog 4 to 2 m 2-output type Output specification of remote type with a temperature sensor: nalog 4 to 2 m 2 outputs Symbol -X T X128 nalog 4 to 2 m 2-output type Refer to page 5 for details of How to Order. Remote monitor unit is equipped as standard. 3 Brass piping material specification Piping (attachment) material changed to brass Symbol -X X143 X143 Brass piping (attachment) material specification Piping (attachment) Refer to page 5 for details of How to Order. Not compatible with units with flow adjustment valve Please special-order separately. Surface treatment is not applied on piping. 15

17 Made to Order Series 4 IO-Link compatible Supports the IO-Link communication protocol Integrated display q q Rated flow range (Flow range) w Thread type e Piping port size 4.5 to 4 L/min Nil Rc Symbol Port size 2 2 to 16 L/min N NPT 4 5 to 4 L/min F G to 1 L/min 1 ISO 228 compliant 21 5 to 25 L/min t Lead wire (Option) Nil With lead wire with M8 connector (3 m) N Without lead wire with M8 connector Q With M12-M8 conversion lead wire (.1 m) 2 2 cable (3 m) with an M12 connector is also available separately. Click here for details. Specifications How to Order LT pplicable flow range /8 4 1/2 6 3/ / /2 y Unit specification Symbol Instantaneous flow ccumulated flow Temperature Nil gal/min gal C M L/min L C Under the New Measurement ct, units other than SI (symbol M ) cannot be used in Japan. Reference: 1 [L/min] =.2642 [gal/min] 1 [gal/min] = [L/min] Symbol -X445 IO-Link compatible r Output specification/temperature sensor Output specification Symbol Temperature OUT1 OUT2 sensor LT IO-Link: Switch output (N/P) Yes u Bracket (Option) Nil None R With bracket i Calibration certificate (Only for flow rate) Nil None Yes The certificate is written in both Japanese and English. The integrated display type with temperature sensor can only display the flow rate. The temperature sensor is not calibrated. Other specifications and dimensions that are not indicated are the same as those of the standard product. For details, refer to page 6 and later. Q M w e r t y u i Model ccumulated flow range L L By.1 L By 1 L Maximum applied voltage 3 V (NPN output) Internal voltage drop 1.5 V or less (at load current of 8 m) 3.5 ms Delay time 2 Variable from to 6 s/.1 s increments Output Select from Hysteresis, Window comparator, ccumulated output, Flow rate mode ccumulated pulse output, Error output, or Switch output OFF modes. When used as a switch output device 12 to 24 VDC, including ripple (p-p) 1% When used as an IO-Link device 18 to 3 VDC, including ripple (p-p) 1% Digital filter 3 Select from.5 s, 1. s, 2. s, 5. s, 1. s, 15. s, 2. s, or 3. s. Environment Withstand voltage 25 VC for 1 minute between external terminals and case Standards and regulations CE marking, RoHS Communication Specifications (IO-Link mode) IO-Link type Device IO-Link version V1.1 Communication speed COM2 (38.4 kbps) Configuration file IODD file*1 Minimum cycle time 3.5 ms Process data length Input data: 6 bytes, Output data: byte On request data communication Yes Data storage function Yes Event function Yes Vendor ID 131 (x83) 74- -LT -M-X445: 33 (x14) 72- -LT -M-X445: 31 (x136) Device ID LT -M-X445: 317 (x13d) LT -M-X445: 331 (x14b) LT -M-X445: 332 (x14c) Switch output Power supply voltage X445 1 Cleared when the power supply is turned off The hold function can be selected. If the 5-minute interval is selected, the life of the memory element (electronic parts) is limited to 3.7 million times. (If energized for 24 hours, life is calculated as 5 minutes x access times (3.7 million) = 18.5 million minutes = about 35 years.) Therefore, if using the hold function, calculate the memory life for your operating conditions, and use within this life. 2 Does not include the value of the digital filter 3 The response time until the set value reaches 9% in relation to the step input (The response time is 7 s when it is output by the temperature sensor.) 1 The configuration file can be downloaded from the SMC website, 2 The device ID differs according to each product type (flow range, whether or not a temperature sensor is provided, etc.). 3-Color Display Digital Flow Switch for Water 3-Color Display Digital Flow Switch for PVC Piping 3-Color Display Digital Flow Monitor for Water 3 ZS-4-M12M8- M12-M8 conversion lead wire M8 connector (32.8) 1 (42.2) M8 (Female) M12 (Male) 3 2 Brown q q White w w Blue 4 1 e e Black r r M12 connector Wiring diagram For wiring, refer to the Operation Manual on the SMC website ( B 16 Function Details

18 For how to order of remote monitor unit, refer to page 24. Remote sensor unit Integrated display 3-Color Display Digital Flow Switch for PVC Piping Series Remote sensor unit Output specification Symbol OUT1 1 nalog 1 to 5 V 2 nalog 4 to 2 m To use in combination with remote monitor (3 series), select analog output of 1 to 5 V of flow rate (output symbol -1 ). How to Order 5 U U 25 M Type 5 Remote sensor unit 7 Integrated display Rated flow range (Flow range) Symbol Rated flow range 11 1 to 1 L/min 21 3 to 25 L/min Connection type U PVC pipe Remote sensor unit/unit printed on label Symbol Instantaneous flow Nil L/min G 1 L/min (gal/min) 1 Under the New Measurement ct, units other than SI (symbol Nil ) cannot be used in Japan. G: Made to order Reference: 1 [L/min].2642 [gal/min] 1 [gal/min] [L/min] Calibration certificate (Only for flow rate) Nil None With calibration certificate The certificate is written in both Japanese and English. The integrated display type with temperature sensor can only display the flow rate. Made to order X19 EPDM seal material (Refer to page 23.) Bracket (Option) Nil None With bracket R Options/Part Nos. PVC pipe O.D. Symbol Port Rated flow range Pipe size O.D.* mm mm *1 JIS K 6742 equivalent Integrated display Output specification Symbol OUT1 OUT2 NPN NPN B PNP PNP C NPN nalog 1 to 5 V D NPN nalog 4 to 2 m E PNP nalog 1 to 5 V F PNP nalog 4 to 2 m G NPN External input H PNP External input External input: The accumulated value, peak value, and bottom value can be reset. Bracket is not available for 25 L/min type. Integrated display/unit specification Symbol Instantaneous flow ccumulated flow M L/min L G gal/min gal Under the New Measurement ct, units other than SI (symbol M ) cannot be used in Japan. G: Made to order Reference: 1 [L/min].2642 [gal/min] 1 [gal/min] [L/min] Lead wire (Option) Nil N With lead wire with M8 connector (3 m) Without lead wire with M8 connector When only optional parts are required, order with the part numbers listed below. Description Part no. Qty. Note Bracket ZS-4-M 1 For 711/511 With 4 tapping screws (4 x 1) Lead wire with M8 connector ZS-4-1 Lead wire length: 3 m 17

19 3-Color Display Digital Flow Switch for PVC Piping Series Specifications (Integrated Display) For flow switch precautions and specific product precautions, refer to the Operation Manual on the SMC website. Model pplicable fluid Water and ethylene glycol aqueous solution (with viscosity of 3 mpa s [3 cp] or less) 1 Detection method Karman vortex Rated flow range 1 to 1 L/min 3 to 25 L/min Display flow range 7 to 14 L/min 2 to 35 L/min (Flow under 7 L/min is displayed as ) (Flow under 2 L/min is displayed as ) Set flow range 7 to 14 L/min 2 to 35 L/min Smallest settable increment 1 L/min 2 L/min Conversion of accumulated pulse 1 L/pulse 2 L/pulse Fluid temperature to 7 C (No freezing or condensation) Display unit Instantaneous flow: L/min, ccumulated flow: L, Display values updated 5 times per second ccuracy Display value: ±3% F.S. nalog output: ±3% F.S. Repeatability ±2% F.S. 2 Temperature characteristics ±5% F.S. (25 C standard) Operating pressure range 3 to 1 MPa Proof pressure 3 1 MPa Pressure loss 45 kpa or less at the maximum flow ccumulated flow range L By 1 L Switch output NPN or PNP open collector output Max. load current 8 m Max. applied voltage 28 VDC Internal voltage drop NPN: 1 V or less (at load current of 8 m) PNP: 1.5 V or less (at load current of 8 m) Response time 2, 5.5 s/1 s/2 s Output protection Short-circuit protection Output mode Flow rate Select from Hysteresis, Window comparator, ccumulated output, or ccumulated pulse output modes. Response time 6.5 s/1 s/2 s (linked with the switch output) nalog output Voltage output Voltage output: 1 to 5 V Output impedance: 1 kω Current output Output current: 4 to 2 m Max. load impedance: 3 Ω for 12 VDC, 6 Ω for 24 VDC Hysteresis Variable External input Voltage free input:.4 V or less (Reed or Solid state), input for 3 ms or longer Display method 2-screen display (Main screen: 4-digit, 7-segment, 2-color, Red/Green Sub screen: 6-digit, 11-segment, White) Indicator light Output 1, Output 2: Orange Power supply voltage 12 to 24 VDC ±1% Current consumption 5 m or less Enclosure IP65 Operating temperature range to 5 C (No freezing or condensation) Environment Operating humidity range Operation, Storage: 35 to 85% R.H. (No condensation) Withstand voltage 1 VC for 1 minute between terminals and housing Insulation resistance 5 MΩ or more (5 VDC measured via megohmmeter) between terminals and housing Standards and regulations CE marking, UL (CS), RoHS PPS, FKM, CPVC Wetted parts material 7 Non-grease Piping port size Weight Without lead wire with connector 285 g 34 g With lead wire with connector 37 g 425 g 1 Refer to the graph of measurable range for ethylene glycol aqueous solution on page 1. Measurement is possible as long as the fluid does not corrode the wetted parts and viscosity is 3 mpa s (3 cp) or less. Refer to the list of applicable fluids on page 31. Be aware that water leakage may occur due to internal seal shrinkage or swelling depending on the type of fluid. 2 If.5 s is selected for the response time of the switch output, the repeatability will be ±3% F.S. 3 The operating pressure range and proof pressure may change according to the fluid temperature. Refer to the graph below. 4 Cleared when the power supply is turned off. The hold function can be selected. (Intervals of 2 or 5 minutes can be selected.) If the 5-minute interval is selected, the life of the memory element (electronic parts) is limited to 1 million times. (If energized for 24 hours, life is calculated as 5 minutes x 1 million = 5 million minutes = about 9.5 years.) Therefore, if using the hold function, calculate the memory life for your operating conditions, and use within this life. 5 The response time when the set value is 9% in relation to the step input 6 The response time until the set value reaches 9% in relation to the step input 7 For details, refer to Wetted Parts Construction on page 2. 8 When the piping diameter or piping passage is restricted, the specifications may not be satisfied. Products with tiny scratches, marks, or display color or brightness variations which do not affect the performance of the product are verified as conforming products. nalog Output Flow rate/nalog output B Voltage output 1 V 1.4 V 1.5 V 5 V Current output C 4 m 5.6 m 5.9 m 2 m Model Rated flow [L/min] Minimum Maximum 711/ / Output C B Minimum rated flow Maximum Flow rate rated flow Operating Pressure and Proof Pressure 711/721/511/521 (for PVC Piping) Pressure [MPa] Fluid temperature [ C] Color Display Digital Flow Switch for Water 3-Color Display Digital Flow Switch for PVC Piping 3-Color Display Digital Flow Monitor for Water 3 Function Details

20 Series For flow switch precautions and specific product precautions, refer to the Operation Manual on the SMC website. Specifications (Remote Sensor Unit) Refer to page 25 for monitor unit specifications. Model pplicable fluid Water and ethylene glycol aqueous solution (with viscosity of 3 mpa s [3 cp] or less) 1 Detection method Karman vortex Rated flow range 1 to 1 L/min 3 to 25 L/min Fluid temperature to 7 C (No freezing or condensation) ccuracy ±3% F.S. Repeatability ±2% F.S. Temperature characteristics ±5% F.S. (25 C standard) Operating pressure range 2 to 1 MPa 2 Proof pressure 2 1 MPa Pressure loss 45 kpa or less at the maximum flow Response time 3 1 s nalog output Voltage output Voltage output: 1 to 5 V Output impedance: 1 kω Current output Output current: 4 to 2 m Max. load impedance: 3 Ω for 12 VDC, 6 Ω for 24 VDC Indicator light For power supply status, flow rate indicator (Blinking speed changes in response to flow rate.), and other error indicator Power supply voltage 12 to 24 VDC ±1% Current consumption 3 m or less Enclosure IP65 Operating temperature range to 5 C (No freezing or condensation) Environment Operating humidity range Operation, Storage: 35 to 85% R.H. (No condensation) Withstand voltage 1 VC for 1 minute between terminals and housing Insulation resistance 5 MΩ or more (5 VDC measured via megohmmeter) between terminals and housing Standards and regulations CE marking, UL (CS), RoHS Wetted parts material 4 PPS, FKM, CPVC Non-grease Piping port size Weight Without lead wire with connector 27 g 325 g With lead wire with connector 355 g 41 g 1 Refer to the graph of measurable range for ethylene glycol aqueous solution on page 1. Measurement is possible as long as the fluid does not corrode the wetted parts and viscosity is 3 mpa s (3 cp) or less. Refer to the list of applicable fluids on page The operating pressure range and proof pressure may change according to the fluid temperature. Refer to the graphs below. 3 The response time until the set value reaches 9% in relation to the step input 4 For details, refer to Wetted Parts Construction on page 2. 5 When the piping diameter or piping passage is restricted, the specifications may not be satisfied. Products with tiny scratches, marks, or display color or brightness variations which do not affect the performance of the product are verified as conforming products. Flow Rate Characteristics (Pressure Loss) 711/ / Pressure loss [MPa] Pressure loss [MPa] Flow rate [L/min] Flow rate [L/min] Straight Piping Length and ccuracy (Reference Value) Straight piping length 711/721/511/521 ±1 Pressure:.3 MPa Piping diameter: 25, 3 Fluid pressure has almost no effect. To maintain ±3% F.S. in the specifications, use a straight pipe that is 11 cm or longer in length. ccuracy [% F.S.] ±8 ±6 ±4 ±2 711/511-U25 721/521-U3 (at 1 L/min) (at 25 L/min) ± Straight piping length [cm] 19 For measurable range for ethylene glycol aqueous solution (reference values), refer to page 1.

21 3-Color Display Digital Flow Switch for PVC Piping Series Wetted Parts Construction q t w e r w t 3-Color Display Digital Flow Switch for Water Component Parts No. Description Material Note 1 PVC pipe CPVC 2 Seal FKM 3 Body PPS 4 Sensor PPS Internal Circuits and Wiring Examples Refer to page 11. Replacement Parts No. Description Part no. Qty. PVC pipe (25) ZS-4-U PVC pipe (3) ZS-4-U retaining plate (With two M5 x 8 hexagonal socket head cap screws) 3 retaining plate (With two M5 x 65 hexagonal socket head cap screws) ZS-4-U25-1 ZS-4-U3-1 Replacing the PVC pipe may cause accuracy to fluctuate by 1 to 2%. 3-Color Display Digital Flow Switch for PVC Piping Function Details 3-Color Display Digital Flow Monitor for Water 3 2

22 Series Dimensions 711-U25 Integrated display x 25 Example 3 4 Connector pin number 2 1 IN (35.5) OUT ø x Pin no. Pin name 1 DC (+) 2 OUT2 3 DC ( ) 4 OUT1 4 x 3.5 depth U25 Remote sensor unit 62.6 IN OUT ZS-4- Lead wire with M8 connector (Black) 4 (Blue) 3 M8 2 (White) 1 (Brown) Pin no. Pin name Wire color 1 DC (+) Brown 2 OUT2 White 3 DC ( ) Blue 4 OUT1 Black 21 ø1 (32.8) ø4 (3) (45) Lead Wire Specifications Nominal cross Conductor section WG23 O.D. pprox..7 mm Material Heat-resistant PVC Insulator O.D. pprox. 1.1 mm Color Brown, White, Black, Blue Sheath Material Heat- and oil-resistant PVC Finished O.D. ø4 4-wire type lead wire with M8 connector used for the series For wiring, refer to the Operation Manual on the SMC website ( (15)

23 3-Color Display Digital Flow Switch for PVC Piping Series Dimensions 721-U3 Integrated display Body side Connector pin number x (35.5) 3-Color Display Digital Flow Switch for Water Pin no. Pin name 1 DC (+) 2 OUT2 3 DC ( ) 4 OUT Flow direction 25 4 x 3.5 depth 14 ø38 3-Color Display Digital Flow Switch for PVC Piping 521-U3 Remote sensor unit Body side Connector pin number x (35.5) 3-Color Display Digital Flow Monitor for Water Pin no. Pin name 1 DC (+) 2 Not used 3 DC ( ) 4 OUT1 Flow direction Function Details 22

24 Series Made to Order Please contact SMC for detailed dimensions, specifications, and lead times. 1 EPDM seal material Seal material for wetted parts changed to EPDM Symbol -X U U X19 X19 EPDM seal material Refer to page 17 for details of How to Order. 23

25 Digital Flow Monitor for Water 3 Series 3 Type 3 Remote monitor unit For remote sensor units, select the analog output 1 to 5 V type. pplicable sensors: 5mm-mm-1(T) Output specification Symbol OUT1 OUT2 NPN NPN B PNP PNP C NPN nalog 1 to 5 V D NPN nalog 4 to 2 m E PNP nalog 1 to 5 V F PNP nalog 4 to 2 m G NPN External input H PNP External input J nalog 1 to 5 V nalog 1 to 5 V K nalog 4 to 2 m nalog 4 to 2 m In combination with remote sensor unit with temperature sensor, only OUT2 can be set for temperature sensor output. Lead wire With power supply/output connection lead wire (2 m) Nil Options/Part Nos. 3-Color Display Power supply/output connection lead wire ZS-4-W How to Order N Without power supply/output connection lead wire The lead wire does not come connected, but it is shipped together with the product. Remote monitor unit/unit specification Symbol Instantaneous flow ccumulated flow Temperature M L/min L C G gal/min gal C F gal/min gal F J L/min L F Under the New Measurement ct, units other than SI (symbol M ) cannot be used in Japan. G, F, J: Made to order Reference: 1 [L/min].2642 [gal/min] 1 [gal/min] [L/min] F = 9/5 C + 32 M V C Calibration certificate (Only flow monitor) Nil None With calibration certificate The certificate is written in both Japanese and English. Option 2 Nil The connector does not come connected, but it is shipped together with the product. Option 1 Nil Waterproof seal (ccessory) Waterproof seal (ccessory) When only optional parts are required, order with the part numbers listed below. Description Part no. Note Panel mount adapter ZS-26-B With waterproof seal and screws Front protective cover + Panel mount adapter ZS-26-C With waterproof seal and screws Front protective cover only ZS-26-1 Separately order panel mount adapter, etc. Power supply/output connection lead wire ZS-4-W Lead wire length: 2 m Sensor connector (e-con) ZS-28-C-4 1 pc. Lead wire with connector for copying ZS-4-Y Connect up to 1 slave units T V C None Sensor connector (1 pc.) Panel Sensor connector (e-con) None Panel mount adapter Panel mount adapter Mounting screw (M3 x 8 L) (ccessory) Front protective cover + Panel mount adapter Front protective cover Panel mount adapter Mounting screw (M3 x 8 L) (ccessory) Panel 24 3-Color Display Digital Flow Switch for Water 3-Color Display Digital Flow Switch for PVC Piping 3-Color Display Digital Flow Monitor for Water 3 Function Details

Digital Flow Switch for Water 3 -color/2-screen display

Digital Flow Switch for Water 3 -color/2-screen display 3-color display New Digital Flow Switch for Water 3 -color/-screen display RoHS Main screen Sub screen Note 3) Main screen Sub screen Note 3) Instantaneous flow rate Set value Note ) ccumulated value Peak/ottom

More information

Digital Flow Switch for Water

Digital Flow Switch for Water 3-color display New Digital Flow Switch for Water RoHS IP65 3-color / 2-screen display Main screen Sub screen Note 3) Main screen Sub screen Note 3) Instantaneous flow rate Set value Note ) ccumulated

More information

Digital Flow Switch for Air/Water

Digital Flow Switch for Air/Water Digital Flow Switch for ir/water Series PF/PFW RoHS For ir Series PF For Water New digital flow switch product, Series PFW, with the compact design and expanded flow rate range has been launched. Please

More information

Digital Flow Switch for Large Flow

Digital Flow Switch for Large Flow 3-Color Display Digital Flow Switch for Large Flow Applicable fluid Air, N2 RoHS IP65 Flow range: Max. 12 L/min Flow ratio * 1 1:1 *1 The flow ratio is 2 : 1 for the current model (PF2A7 H/Large flow type).

More information

Electromagnetic Type Digital Flow Switch

Electromagnetic Type Digital Flow Switch 3-color display New Electromagnetic Type Digital Flow Switch RoHS IP65 Compact/Lightweight Weight: 340 g (LFE3) Actual size 90 mm 56 mm 40 mm Oval fluid passage reduced product width Reverse flow can be

More information

Electromagnetic Type Digital Flow Switch

Electromagnetic Type Digital Flow Switch 3-color display New Electromagnetic Type Digital Flow Switch RoHS IP65 Compact/Lightweight Weight: 340 g (LFE3) Actual size 90 mm 56 mm 40 mm Oval fluid passage reduced product width Reverse flow can be

More information

Electromagnetic Digital Flow Switch

Electromagnetic Digital Flow Switch 3-Color Display Electromagnetic Digital Flow Switch RoHS Compact Actual size (LFE1) 56 mm The oval fluid passage enables the width to be reduced. New Close proximity setting allows for space saving. (p.

More information

100 : 1. Digital Flow Switch. PFMB Series 66 % 67% 76 % 81% 2-Color Display (Only 200 L type) Compact, Space saving

100 : 1. Digital Flow Switch. PFMB Series 66 % 67% 76 % 81% 2-Color Display (Only 200 L type) Compact, Space saving 2-Color Display (Only 200 L type) Digital Flow Switch RoHS New Applicable fluid Dry air, N2 3-Screen Display Digital Flow Monitor Allows for the monitoring of remote lines Wide range of flow measurement

More information

3-color/ 2-screen display 1

3-color/ 2-screen display 1 3-Color Display Digital Flow Switch Applicable fluid Dry air, N2 RoHS IP65 3-color/ 2-screen display 1 1 2-row display of main screen and sub screen Accumulated value Instantaneous flow rate (Main screen)

More information

How to Order. Flow rate (l/min) Applicable models PFA710, PFA750. Nil

How to Order. Flow rate (l/min) Applicable models PFA710, PFA750. Nil Integrated Display Type Flow rate range 0 2 5 Symbol 0 02 03 0 Specifications ow Order PFA7 0 0 27 0l/min 5 l/min 0 00l/min 20 200l/min 0l/min Port size /8 / 3/8 /2 Model Measured fluid Detection type

More information

1 Output 1 operation. 3 Pressure unit display. 4 Main display Large 4-character LCD display. 5 Sub-display Small 4-character LCD display.

1 Output 1 operation. 3 Pressure unit display. 4 Main display Large 4-character LCD display. 5 Sub-display Small 4-character LCD display. ure Sensor DP-100 Series INSTRUCTI MANUAL High-performance Digital Display For use outside Japan MEUML-DP100 V1.1 Thank you for purchasing products from Panasonic Electric Works SUNX Co., Ltd. Please read

More information

Mechanical flow switch for On/Off control

Mechanical flow switch for On/Off control Mechanical flow switch for On/Off control Economic integration in pipe systems without any additional piping Magnetic measuring principle Mechanical adjustment of setpoint Type 8010 can be combined with...

More information

Digital Gap Checker to 0.15 mm (Displayable/Settable range: 10 to 300) G type Rated distance range. Workpiece. Large gap. Workpiece.

Digital Gap Checker to 0.15 mm (Displayable/Settable range: 10 to 300) G type Rated distance range. Workpiece. Large gap. Workpiece. 3-Color Display New F type Rated distance range.1 to.3 mm (Displayable/Settable range: to 6) Digital Gap Checker G type Rated distance range.2 to.15 mm (Displayable/Settable range: 1 to 3) H type Rated

More information

WIRING. Connection connector. NPN output type Standard type. Main circuit. High-function type. Main circuit. PNP output type.

WIRING. Connection connector. NPN output type Standard type. Main circuit. High-function type. Main circuit. PNP output type. INSTRUCTI MANUAL Sensor High-performance Digital Display DP-1 Series Thank you very much for using SUNX products. Please read this Instruction Manual carefully and thoroughly for the correct and optimum

More information

AP-40. AP-40 Series Features Industry s smallest-sensor head Ultra lightweight High-speed response Two-color LED digital pressure display

AP-40. AP-40 Series Features Industry s smallest-sensor head Ultra lightweight High-speed response Two-color LED digital pressure display AP-34 Separate Amplifier Type Sensor Series Features Industry s smallest-sensor head Ultra lightweight High-speed response Two-color LED digital pressure display Description Industry's smallest & lightest

More information

Digital Gap Checker to 0.15 mm (Displayable/Settable range: 10 to 300) G type Rated distance range. Workpiece. Large gap. Workpiece.

Digital Gap Checker to 0.15 mm (Displayable/Settable range: 10 to 300) G type Rated distance range. Workpiece. Large gap. Workpiece. 3-Color Display F type Rated distance range.1 to.3 mm (Displayable/Settable range: to 6) Digital Gap Checker G type Rated distance range.2 to.15 mm (Displayable/Settable range: 1 to 3) H type Rated distance

More information

Digital Gap Checker. Workpiece. Large gap. Workpiece. Workpiece. Small gap. Detection surface Detection nozzle. Air STEP 2 STEP 3

Digital Gap Checker. Workpiece. Large gap. Workpiece. Workpiece. Small gap. Detection surface Detection nozzle. Air STEP 2 STEP 3 3-Color Display Digital Gap Checker A 2 outputs type has been added. RoHS Check at a glance if the workpiece is placed or not! : Placed Workpiece Main screen OFF: Not placed Workpiece The clearance distance

More information

RK-2 ENVIRONMENTAL DATA CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD. Main characteristics

RK-2 ENVIRONMENTAL DATA CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD. Main characteristics RK-2 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD (ANALOG OR START/STOP OUTPUT) Main characteristics Absolute transducer Strokes from 50 to 4000mm (RK-2- -N/E/S) Digital output

More information

Pressure Sensor. PSAN Series. Compact Digital Pressure Sensors. Features Pressure Measurement Range (Negative, Standard, Compound)

Pressure Sensor. PSAN Series. Compact Digital Pressure Sensors. Features Pressure Measurement Range (Negative, Standard, Compound) Compact Digital Wide Range 2 Independent Outputs Features Measurement Range (Negative, Standard, Compound) Analog Output Stable Output 2 Independent Outputs Two independent outputs are available (OUT1,

More information

Single Point Flow Monitor SW118 SW119

Single Point Flow Monitor SW118 SW119 SW8 SW9 SW8 SW9 Single point flow monitors with MIN/MAX monitoring function, suitable for water, oil, air and media with similar thermal conductivities (selectable by means of a medium switch). With either

More information

Electromagnetic Type Digital Flow Switch

Electromagnetic Type Digital Flow Switch 3-colour display New Electromagnetic Type Digital Flow Switch RoHS IP65 Compact/Lightweight Weight: 340 g (LFE3) Actual size 90 mm 56 mm 40 mm Oval fluid passage reduced product width Reverse flow can

More information

1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times

1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times Color Mark Color Mark Feature Outstanding color matching accuracy - RGB light emitting diodes and 12-bit resolution - 2 detection modes (color only / color + intensity) - -step sensitivity adjustment for

More information

PROPORTIONAL VALVES Sentronic plus

PROPORTIONAL VALVES Sentronic plus 04GB-06/R0 PROPORTIONAL VALVES Sentronic plus with external pressure supply G / FEATURES Sentronic plus is a highly dynamical -way proportional valve with digital control. Sentronic plus stands for: Digital

More information

Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON

Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that

More information

Selection matrix for electronic pressure switches

Selection matrix for electronic pressure switches Selection matrix for electronic pressure switches Type / series 0500 050 050 05 050 0570 050 05 05 05 050 05 05 05 055 056 Page 09 09 7 0 5 5 5 5 9 9 9 9 9 9 Technology Measuring cell ceramic / thick-film

More information

E8Y. Micropressure Sensor with Easy-to-Read Digital Display. Differential Pressure Sensor. Ordering Information. Sensors

E8Y. Micropressure Sensor with Easy-to-Read Digital Display. Differential Pressure Sensor. Ordering Information. Sensors Differential Sensor Micropressure Sensor with Easy-to-Read Digital Repeat accuracy of ±1% FS (setting resolution: 0.01 kpa), high-precision pressure control available. Compact design (31 mm) saves mounting

More information

Pressure Sensor. Ordering Information. Mini-Cube Pressure Sensor with Easy-to-Read LED Display

Pressure Sensor. Ordering Information. Mini-Cube Pressure Sensor with Easy-to-Read LED Display Sens Mini-Cube Sens with Easy-to-Read LED Display Industry s smallest, lightest l Both analog bar and digital pressure values are displayed Two independent outputs plus one analog output are available

More information

20 mm Beam Pitch General Purpose Area Sensor. Distance between parts shelf and sensor can be shortened (Enables miniaturization of equipment)

20 mm Beam Pitch General Purpose Area Sensor. Distance between parts shelf and sensor can be shortened (Enables miniaturization of equipment) OTHER SUNX PRODUCTS SERIES 0 mm Beam Pitch General Purpose Area Sensor Diagnosis Self-diagnosis Test input Interference prevention Wide sensing area of 7 m,60 mm with 0 mm beam pitch Refer to p.9l for

More information

ZN-PD. Smallest Air Particle Sensor in the Industry for In-line Measurement. Air Particle Sensor. Features

ZN-PD. Smallest Air Particle Sensor in the Industry for In-line Measurement. Air Particle Sensor. Features Air Particle Sensor Smallest Air Particle Sensor in the Industry for In-line Measurement Suitable for continuous measurement. With Realtime Clean Air Monitor. Be sure to read Safety Precautions on page

More information

Technical data. General specifications. 60 ma Power consumption P 0. 1 W Time delay before availability t v. 120 ms Interface. Protocol IO-Link V1.

Technical data. General specifications. 60 ma Power consumption P 0. 1 W Time delay before availability t v. 120 ms Interface. Protocol IO-Link V1. Model Number Single head system Features IO-link interface for service and process data Programmable via DTM with PACTWARE programmable switch outputs Selectable sound lobe width Synchronization options

More information

GC61 Digital Pressure Gauge. Operation Manual

GC61 Digital Pressure Gauge. Operation Manual TY-GC61-009A エ GC61 Digital Pressure Gauge Operation Manual 2016. 3 TY-GC61-009A 1/24 For proper and safe operation GC61 Digital Pressure Gauge is a compact digital pressure gauge which complies with the

More information

APPLICATIONS. Automatic warehouse. Trasportation lines

APPLICATIONS. Automatic warehouse. Trasportation lines INDUCTIVE TUBULAR SENSOR M8 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating

More information

SERIES x5. Nickel-plated brass Connection 1) PUR cable type 1 Degree of protection. IP 67 Mounting. Embeddable Max. switching frequency

SERIES x5. Nickel-plated brass Connection 1) PUR cable type 1 Degree of protection. IP 67 Mounting. Embeddable Max. switching frequency 1 Size SERIES 400 x SERIES x Operating distance mm 0.8 0.8 1. Housing material Connection 1) PUR cable type 1 PUR cable type 1 / Connector S8 PUR cable type 1 Degree of protection Mounting Max. switching

More information

Sentronic PLUS Electronic Pressure Regulator. Installation Manual

Sentronic PLUS Electronic Pressure Regulator. Installation Manual Sentronic PLUS Electronic Pressure Regulator Installation Manual Sentronic PLUS ASCO NUMATICS Sentronic PLUS Electronic Pressure Regulator Electrical Characteristics * Max. ripple: 10 % Specifications

More information

Separate Thin Amplifier type. AP-V40AW Series

Separate Thin Amplifier type. AP-V40AW Series Separate Thin Amplifier type AP-V40AW Series COMPACT PRESSURE SENSOR THE IDEAL SIZE FOR EASY INSTALLATION AND OPERABILITY World s Smallest Model with the Largest Character Height The world s most compact

More information

GC30 Digital Differential Pressure Gauge Operation Manual

GC30 Digital Differential Pressure Gauge Operation Manual TY-GC30-001A GC30 Digital Differential Pressure Gauge Operation Manual NAGANO KEIKI CO., LTD 2004.02.12 For safety of use TY-GC30-001A In order to safely and correctly utilize this device, please read

More information

DS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections

DS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing Description The electronic pressure switch is the successful combination of hygienic process connections with flush welded

More information

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment rtisan Technology Group is your source for quality new and certified-used/pre-owned equipment FST SHIPPING ND DELIVERY TENS OF THOUSNDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MNUFCTURERS SUPPORTED

More information

Photoelectric Sensors E3F2

Photoelectric Sensors E3F2 Photoelectric Sensors E3F2 Threaded Cylindrical Photoelectric Sensors with Built-in Amplifier for Use as an Optical Proximity Switch M18 DIN-sized cylindrical housing Housing materials: plastic, nickel

More information

DMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial

DMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter Nominal pressure from 0... 6 bar up to 0... 600 bar Output

More information

Digital Flow Monitor PFG3#0

Digital Flow Monitor PFG3#0 PRODUCT NAME Digital Flow Monitor MODEL / Series / Product Number PFG3#0 Table of Contents Safety Instructions 2 Model Indication and How to Order 8 Summary of Product parts 9 Definition and terminology

More information

DS 200 P DS 200 P. Electronic Pressure Switch with Flush Process Connection

DS 200 P DS 200 P. Electronic Pressure Switch with Flush Process Connection with Flush Process Connection piezoresistive pressure sensor up to independent contacts, configurable optional: analogue output Exprotection (for wire) cooling element up to 00 C nominal pressure ranges

More information

DCT 532. Industrial Pressure Transmitter with i²c interface. Stainless Steel Sensor

DCT 532. Industrial Pressure Transmitter with i²c interface. Stainless Steel Sensor Industrial Pressure Transmitter with i²c interface Stainless Steel Sensor Accuracy according to IEC 60770: standard: ± 0. % FSO option: ± 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Digital

More information

Ultrasonic Sensor Diffuse Mode Sensor RU40U-M18E-LIU2PN8X2T-H1151

Ultrasonic Sensor Diffuse Mode Sensor RU40U-M18E-LIU2PN8X2T-H1151 Smooth sonic transducer face Cylindrical housing M18, potted Connection via M12 x 1 male Teach range adjustable via pushbutton or adapter Temperature compensation Blind zone: 2.5 cm Range: 40 cm Resolution:

More information

Operating Instructions

Operating Instructions CNTX Contrast sensor Operating Instructions CAUTIONS AND WARNINGS SET-UP DISTANCE ADJUSTMENT: As a general rule, the sensor should be fixed at a 15 to 20 angle from directly perpendicular to the target

More information

Ultrasonic Sensor Diffuse Mode Sensor RU600U-EM30E-LIU2PN8X2T-H1151/3GD

Ultrasonic Sensor Diffuse Mode Sensor RU600U-EM30E-LIU2PN8X2T-H1151/3GD ATEX II 3 G approval Gases and vapors IIC group, zone 2 Dusts IIIC group, zone 22 When used in Ex areas, the special conditions of the approval must be observed Safety clips to prevent inadvertent detachment

More information

E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm

E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.

More information

Flow Monitor PF3W3##

Flow Monitor PF3W3## PRODUCT NAME Flow Monitor MODEL / Series / Product Number PF3W3## Table of Contents Safety Instructions 2 Model Indication and How to Order 9 Summary of Product parts 12 Definition and terminology 13 Mounting

More information

Metric Series. PXM409 Differential Series. mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-25 mbar to 0-70 bar

Metric Series. PXM409 Differential Series. mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-25 mbar to 0-70 bar Micro-Machined Silicon Transducers wet/dry differential mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-25 mbar to 0-70 bar PXM409 Differential Series U 5-Point NIST Traceable

More information

Solid-State Digital Timer

Solid-State Digital Timer Solid-State Digital Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay,

More information

High Resolution Multicolor Contrast Scanner. Dimensioned drawing

High Resolution Multicolor Contrast Scanner. Dimensioned drawing Specifications and description KRTM 20 High Resolution Multicolor Contrast Scanner Dimensioned drawing en 01-2011/06 50116669 12mm 20mm 50mm 12-30 V DC 50 / 25 khz We reserve the right to make changes

More information

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment.

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment. Absolute 60-mm-dia. Rotary Encoder A High Accuracy and Durability for Automatic Equipment Stronger shaft and greater durability (120 N in the radial direction and 50 N in the thrust direction) than previous

More information

ADVANCED ultrasonic sensors with analog output. Dimensioned drawing

ADVANCED ultrasonic sensors with analog output. Dimensioned drawing ADVANCED ultrasonic sensors with analog output Dimensioned drawing en 07-2017/02 50124880 4...20 ma 0...10 V 25 400mm 150 1300mm 15-30 V DC We reserve the right to make changes PAL_DMU418BX3LTVC_en_50124880.fm

More information

PROXIMITY SWITCHES INDUCTIVE TUBULAR SENSOR M30 SERIES HIGHLIGHTS APPLICATIONS

PROXIMITY SWITCHES INDUCTIVE TUBULAR SENSOR M30 SERIES HIGHLIGHTS APPLICATIONS INDUCTIVE TUBULAR SENSOR M30 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating

More information

Photoelectrics Through-beam Type PA18C.T..., DC

Photoelectrics Through-beam Type PA18C.T..., DC Photoelectrics Through-beam Type, DC Miniature sensor range Range: 20 m (Axial), 16 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to 30 VDC Output:

More information

Sensor technologies Proximity sensors Series ST4. Brochure

Sensor technologies Proximity sensors Series ST4. Brochure Series ST Brochure 2 Series ST ST Sensor, Series ST with cable open cable ends, -pin Sensor, Series ST mm C-slot with cable Plug, M8, -pin 6 Sensor, Series ST mm C-slot with cable Plug, M8, -pin, with

More information

Sentronic PLUS. Electronic Pressure Regulator. Installation Manual

Sentronic PLUS. Electronic Pressure Regulator. Installation Manual Sentronic PLUS Electronic Pressure Regulator Electronic Pressure Regulator Sentronic PLUS Sentronic PLUS Electronic Pressure Regulator General Electrical Characteristics Nominal Diameter DN (mm) Voltage

More information

Scanning Laser Range Finder Smart-URG mini UST-10LX (UUST003) Specification

Scanning Laser Range Finder Smart-URG mini UST-10LX (UUST003) Specification Date: 2014.6.12 Scanning Laser Range Finder Smart-URG mini UST-10LX (UUST003) Specification RoHS Symbol Amended Reason Pages Date Amended by Ref.No Approved by Checked by Drawn by Designed by Title UST-10LX

More information

CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions

CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions CSM Color sensors Color sensors for the detection of a single color in restricted space conditions Due to its compact design, the CSM can be used in the most confined of spaces. The choice of color tolerance

More information

- special pressure ranges - variety of electrical and mechanical. Characteristics. - other versions on request

- special pressure ranges - variety of electrical and mechanical. Characteristics. - other versions on request DMP Industrial Pressure Transmitter for Low Pressure piezoresistive stainless steel sensor O p t i o n : f l u s h v e r s i o n accuracy: 0.75 %, 0.5 %, 0.0 %, 0.05 % FSO BFSL (0.5 %, 0.5 %, 0. %, 0.

More information

TEK-LCD 7801A. NEMA 4X Loop-Powered Feet and Inches Level Meter. ACCESSORIES. Technology Solutions

TEK-LCD 7801A. NEMA 4X Loop-Powered Feet and Inches Level Meter.   ACCESSORIES. Technology Solutions Technology Solutions TEK-LCD 7801A NEMA 4X Loop-Powered Feet and Inches Level Meter ACCESSORIES www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction The

More information

DMP 331 DMP 331. Industrial Pressure Transmitter. for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial. tri-matic.

DMP 331 DMP 331. Industrial Pressure Transmitter. for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial. tri-matic. DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter from 0... 00 mbar

More information

Figure 1: Standard 906 Sensor and Pulser Disc. Figure 2: Standard 906 Sensor and Pulser Wrap

Figure 1: Standard 906 Sensor and Pulser Disc. Figure 2: Standard 906 Sensor and Pulser Wrap Description: The TR5000 is a Full Logic Control Process ratemeter that can display up to three separate values of rate and compare them to programmable set points. Rates A & B can be programmed by the

More information

Micro-Machined Silicon Transducers

Micro-Machined Silicon Transducers Micro-Machined Silicon Transducers wet/wet differential Pressure Models mv/v, 0 to 5 or 0 to 10 Vdc, or 4 to 20 ma Outputs Uni-Directional Ranges 0-25 mbar to 0-70 bar PXM409 Differential Series Standard

More information

The full range of performance

The full range of performance sensors sensors P sensors PS series series The full range of performance The sensors of this series cover all important pressure ranges from -1 +600 bar with an accuracy of 0.5% f.s.. Bar, psi and further

More information

Absolute Rotary Encoder E6CP

Absolute Rotary Encoder E6CP Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the

More information

Cylindrical Photoelectric Sensor CY-100 SERIES

Cylindrical Photoelectric Sensor CY-100 SERIES Cylindrical Photoelectric Sensor CY-00 SERIES Listing (2 m cable length type only) Features Wide product range Shape: Standard type Side view type Connector: 2 m cable length type M2 plug-in connector

More information

LMP 331 LMP 331. Screw-In Transmitter with piezoresistive Stainless Steel Sensor

LMP 331 LMP 331. Screw-In Transmitter with piezoresistive Stainless Steel Sensor LMP Screw-In Transmitter with piezoresistive Stainless Steel Sensor flush diaphragm hydrostatic level measurement of clean, thin fluid media nominal pressure ranges from 0... 40 mbar up to 0... 40 bar

More information

Technical data. General specifications. Indicators/operating means

Technical data. General specifications. Indicators/operating means Model Number Single head system Features Sensor head bidirectional and rotatable Function indicators visible from all directions Quick mounting bracket Selectable sound lobe width Programmable Diagrams

More information

Pressure transmitter COMPACT IO-Link,

Pressure transmitter COMPACT IO-Link, Pressure transmitter COMPACT IO-Link, for diaphragm seal operation, Type series CA1510 Features Digital pressure transmitter with IO-Link V1.1 output signal Data transmission rate COM 3 (230.4 kbaud) Hygienic

More information

FTS84/85 Feature Application Field. Temperature & Humidity / Flow Measuring Specialist. Monitor gas and flow for industrial process

FTS84/85  Feature Application Field. Temperature & Humidity / Flow Measuring Specialist. Monitor gas and flow for industrial process FTS84/8 Feature Application Field Capable of temperature compensation and linear adjustment Double line character : air velocity & temperature Switch for physical quantity:[m/s] [ft/s] [km/h] [mph] [knot]

More information

Signet 2250 Hydrostatic Level Sensor

Signet 2250 Hydrostatic Level Sensor Signet 2250 Hydrostatic Sensor *32250.090* 32250.090 Rev. A 10/06 English English Safety Instructions 1. Prior to installation or removal: Depressurize and vent system Drain below sensor level 2. Confi

More information

DMP 339. Pressure Transmitter. with G ¼" flush diaphragm. Pressure Transmitter. Industrial. accuracy according to IEC 60770: 0.

DMP 339. Pressure Transmitter. with G ¼ flush diaphragm. Pressure Transmitter. Industrial. accuracy according to IEC 60770: 0. DMP 9 Industrial Pressure Transmitter with G ¼" flush diaphragm accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter DMP 9 Nominal pressure from 0... 60 bar up to 0... 600 bar Output

More information

Capacitive sensor BCT5-S18-UP6X2T-H1151

Capacitive sensor BCT5-S18-UP6X2T-H1151 M18 1 threaded barrel Plastic, PA12-GF30 Teach-in and configuration via buttons on the device, pin 5 and IO-Link Wiring Diagram Functional principle Type designation Ident no. 2101100 Remark to product

More information

Level instruments. Point level measurement - Capacitance switches. Pointek CLS100. 5/10 Siemens FI Overview.

Level instruments. Point level measurement - Capacitance switches. Pointek CLS100. 5/10 Siemens FI Overview. Siemens G 2009 Overview Configuration is a compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam. Benefits

More information

Inductive sensor NI3-EG08K-Y1-H1341

Inductive sensor NI3-EG08K-Y1-H1341 ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1

More information

02/11/2015

02/11/2015 24 x 48 Totalizers CTR24 non-backlit model Part number 87622062 Display : 8-digit LCD, height 8 mm Powered by a lithium battery Counter inputs : solid state (4-30 VDC) or voltage (10 260 VAC) Reset on

More information

Panel-mounting thermostats, type series EM

Panel-mounting thermostats, type series EM Data sheet 602025 Page /5 Panel-mounting thermostats, type series EM Particularities Operating temperature limiter Limit value range up to +650 C with temperature compensation Brief description Panel-mounting

More information

Assembly. Front view. LEDs. Parametrization interface. Power Bus

Assembly. Front view. LEDs. Parametrization interface. Power Bus otation Speed Monitor Features Assembly 1-channel signal conditioner 2 V DC supply Input for 2- or -wire sensors Input frequency 10 mhz... 50 khz elay contact output Start-up override and restart inhibit

More information

EZ-SCREEN LS. Safety Light Screen

EZ-SCREEN LS. Safety Light Screen EZ-SCREEN LS Safety Light Screen Quick, easy configuration no DIP switches or software to configure End-to-end sensing Heavy-duty aluminum housing and recessed window to avoid damage in harsh environments

More information

FLOMAT Electromagnetic Insertion Flowmeter

FLOMAT Electromagnetic Insertion Flowmeter LOMAT Electromagnetic Insertion lowmeter Working pressure manufacturing according to PED 97/23/CE (Lloyd s Register Certificate Nº 031) Introduction or use in large diameter pipes or open channels as an

More information

Bimetal Temperature Switch

Bimetal Temperature Switch Phone: +44 19 635533 Fax: +44 19 635262 Data sheet 608301 Page 1/8 Bimetal Temperature Switch Special features Electromechanical temperature switch with a fixed switching temperature Protection type IP52,

More information

ATEX. 50D (Pneumatic) Electronic pressure switch bar, bar, bar, bar, bar

ATEX. 50D (Pneumatic) Electronic pressure switch bar, bar, bar, bar, bar 0D (Pneumatic) Electronic pressure switch -... 0 bar, -... bar, 0... 6 bar, 0... 0 bar, 0... bar Fast error detection viamulti-colour display Easy to use pressure switch with clear display and intuitive

More information

LMP 305. Slimline Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.

LMP 305. Slimline Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO. Slimline Probe Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO Nominal pressure from 0... mh 2 O up to 0... 250 mh 2 O Output signals 2-wire: 4... 20 ma

More information

MS2540 Current Loop Receiver with RS485 Communication

MS2540 Current Loop Receiver with RS485 Communication MS2540 Current Loop Receiver with RS485 Communication User Manual Metal Samples Company A Division of Alabama Specialty Products, Inc. 152 Metal Samples Rd., Munford, AL 36268 Phone: (256) 358 4202 Fax:

More information

DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO.

DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. accuracy according to IEC 60770: 0.5 % FSO. DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 6 bar up to 0... 600 bar Output signals -wire: 4... 0 ma -wire:

More information

02/11/2015

02/11/2015 DIN Rail Mount 17.5 mm MUS/MUSF 80 AC/DC Part number 84872141 Control relays monitoring their own power supply - MUS : Over/undervoltage control Selectable latching (memory) function - MUSF : Over/undervoltage

More information

Digital pressure sensor PPX series

Digital pressure sensor PPX series Easy to check with dual digital display! New product Digital pressure sensor PPX series DIGITAL PRESSURE SENSOR PPX SERIES CC-825 1 Easy to check with dual digital New easy-to-use high-function digital

More information

Wall-/Pipe-Mount Level Indicator

Wall-/Pipe-Mount Level Indicator Data Sheet SS/_4 Wall-/Pipe-Mount Level Indicator High visibility 5-digit LED display clear multi-functional indication Analog and 2-relay outputs as standard high, low, latch and rate alarms, plus isolated

More information

AI-1204Z-PCI. Features. 10MSPS, 12-bit Analog Input Board for PCI AI-1204Z-PCI 1. Ver.1.04

AI-1204Z-PCI. Features. 10MSPS, 12-bit Analog Input Board for PCI AI-1204Z-PCI 1. Ver.1.04 10MSPS, 12-bit Analog Board for PCI AI-1204Z-PCI * Specifications, color and design of the products are subject to change without notice. This product is a PCI bus-compliant interface board that expands

More information

10 PDUs 19 PDUs Zero-U PDUs

10 PDUs 19 PDUs Zero-U PDUs 128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex - France Tel: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 www.legrand.com 10 PDUs Page 1. GENERL CHRCTERISTICS...1 2. EQUIPMENT ND PERFORMNCE...3

More information

APPLICATIONS. Automatic warehouse. Trasportation lines

APPLICATIONS. Automatic warehouse. Trasportation lines INDUCTIVE TUBULAR SENSOR M12 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating

More information

LAUREL ELECTRONICS, INC.

LAUREL ELECTRONICS, INC. LAUREL ELECTRONICS, INC. Laureate Digital Panel Meter for Process, Strain & Potentiometer Follower Signals Features Selectable ±0.2, ±2, ±20, ±200, ±300 & ±600 Vdc voltage ranges Selectable ±2, ±20, ±200

More information

EVENT INPUT/OUTPUT MODULE [PUME]

EVENT INPUT/OUTPUT MODULE [PUME] PUM Series Multi-loop module type Temperature controller DATA SHEET EVENT INPUT/OUTPUT MODULE [] is a digital input/output module used as an auxiliary input/output of control modules. Each module, 30mm

More information

XW3D. Simple Wiring of Sensor Actuators. Connector Terminal Boxes. Specifications. Materials and Finish. Connection Combinations

XW3D. Simple Wiring of Sensor Actuators. Connector Terminal Boxes. Specifications. Materials and Finish. Connection Combinations Terminal Boxes XWD CSM_XWD_DS_E Simple Wiring of Sensor Actuators Greatly reduce wiring in combination with the Smartclick XS. Insert the connector and turn / of a turn to lock the connectors. Higher rated

More information

Solenoid valves VZWD, directly actuated

Solenoid valves VZWD, directly actuated 2015/12 Subject to change Internet: www.festo.com/catalogue/... 1 Key features and overview General Directly actuated solenoid valves VZWD are mainly intended for applications with high pressure ranges

More information

UV Power Monitor. incident light 200 to 370 nm 300 C (Use at temperatures below the Fiber Unit s rated operating

UV Power Monitor. incident light 200 to 370 nm 300 C (Use at temperatures below the Fiber Unit s rated operating UV Power Monitor Monitor the Output of a UV Light Source through an Optical Fiber Cable Head Unit withstands temperatures of up to 300 C. Easy-to-read digital display of measurement values. Harmful UV

More information

Set for simple I/O communication via PROFIBUS-DP in IP20 TI-BL20-DPV1-S-8

Set for simple I/O communication via PROFIBUS-DP in IP20 TI-BL20-DPV1-S-8 Type code Ident no. 1545077 Number of channels 8 Dimensions (W x L x H) 110.3 x 128.9 x 74.4 mm A special software (function module) for integration in PLC systems is not required. Cable max. 50 m between

More information

Inductive sensor NI10-M18-Y1X-H1141

Inductive sensor NI10-M18-Y1X-H1141 ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1

More information

Amphenol. Amphenol-Tuchel Electronics GmbH. C 112 Series M12 - Connectors

Amphenol. Amphenol-Tuchel Electronics GmbH. C 112 Series M12 - Connectors Amphenol Amphenol-Tuchel Electronics GmbH C 112 Series M12 - Connectors We connect con The company Amphenol-Tuchel Electronics is a worldwide leader in electrical connectors and contacting devices. Our

More information