Electrical 25 C Operating Temperature 0 C to +70 C TX RX L/R. RJ45 Durability Testing Rating

Transcription

1 Description: RoHS-5 1,6 RoHS-6 7 No. of Compliant Compliant Ports Part No. Part No. J2039H3 ( A,B,C) J2042H3 ( A,B,C) J2045H3 ( A,B,C) _ Insertion Return Loss Coon Mode Turns 2 LEDs 3 PoE 4 Loss (db TYP) Crosstalk Rejection Ratios Enabled (db TYP) 100Ω ±15Ω (db TYP) (db TYP) TX RX L/R MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz 8,12,16 1:1 1:1 None No ,12,16 1:1 1:1 None No ,12,16 1:1 1:1 None No J J NL 4 1:1 1:1 G/Y, G/Y No J J NL 8 1:1 1:1 G/Y, G/Y No J _ 12 1:1 1:1 G/Y, G/Y No J _ 16 1:1 1:1 G/Y, G/Y No J _ 8 1:1 1:1 None Yes J _ 12 1:1 1:1 None Yes Notes: Electrical 25 C Operating Temperature 0 C to +70 C 10/100 Base-TX RJ45 2XN Tab-UP with or without LEDs (J2 series) integrated magnetics connector (ICM), designed to support applications, such as Hub and Switches and Power over Ethernet enabled switch/hub systems. 1. Part numbers code (A,B,C, D): A = 2x4, B = 2x6, C = 2x8, D = 2x2 2. Both transmit and receive channels meet IEEE specifications. 3. Bi-color LEDs: G = green; Y = yellow for each port 4. PoE = Power over Ethernet Compatible product, compliant to IEEE 802.3af standard, providing minimum 1.5Kv isolation 5. Contact Pulse for PoE enabled product with LEDs. Part Number Features and Benefits: RoHS-5 peak wave solder temperature rating 235 C RoHS-6 peak wave solder temperature rating 260 C 2XN RJ45 with internal magnetics Available with or without LEDs Power over Ethernet (PoE) Enabled. Compatible to IEEE 802.3af standard Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP Internal magnetics are 100% electrically tested for HI-POT and functionality Electrical Performance Suary: Internal magnetics options available Meets or exceeds IEEE 802.3i/u/af standard 350µH minimum OCL with 8mA bias current High performance for maximum EMI suppression Minimum 1500 Vrms isolation per IEEE 802.3i/u/af requirement 6. RoHS-5 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive. Product contains lead in applications considered as solders. 7. RoHS-6 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive. Some internal connections may contain lead in high temperature solder (solder alloys containing more than 85% lead). RJ45 Durability Testing Rating Mating Force Unmating Force Durability Plug to Jack (MAX) (MAX) Retention (MIN) J2 Series 5lbs./2.268kgs. 5lbs./2.268kgs. 0 Insertions 20lbs./9.072kgs. RJ45 Material Specification Part Shield Contact Housing Number Material Finish Material Plating Area Solder Area Material Specification J m inches Nickel over Phosphor Nickel underplating and 120µ inches Sn90/Pb10 Series Brass 10-20m inches Brass Bronze selective gold plating 30µ inches over 50µ inches nickel Thermoplastic UL 94 V-0 Notes: 1. All connector part numbers starting with the series prefix J2 comply to the above limits. 2. Connector dimensions comply with FCC dimension requirements. 1 J401.C (6/06)

2 2 X 4 J2 Series (No LEDs) Mechanicals (available PoE Enabled) PoE Enabled Connector Pin Out Assignment PoE Pins Signal Pins Signal Pins PoE Pins CHANNELS 1-4 (REPEAT FOR 5-8, 9-12, AND 13-16) CH 4 CH 6 CH 8 NOTE: This applies to 2x4, 2x6 PoE configurations. CH 1 CH 3 CH 5 CH 7 Increased creepage and clearance between the PoE and the signals pins increased to maintain a Hi Pot isolation of 1500 Volts min. Unless otherwise specified, all tolerances are ± J401.C (6/06)

3 2 X 6 J2 Series (No LEDs) Mechanicals (available PoE Enabled) PoE Enabled Connector Pin Out Assignment PoE Pins Signal Pins Signal Pins PoE Pins CHANNELS 1-4 (REPEAT FOR 5-8, 9-12, AND 13-16) CH 4 CH 6 CH 8 NOTE: This applies to 2x4, 2x6 PoE configurations. CH 1 CH 3 CH 5 CH 7 Increased creepage and clearance between the PoE and the signals pins increased to maintain a Hi Pot isolation of 1500 Volts min. Unless otherwise specified, all tolerances are ± J401.C (6/06)

4 2 X 8 J2 Series (No LEDs) Mechanicals (not PoE Enabled) Unless otherwise specified, all tolerances are ± J401.C (6/06)

5 2 X 2 J2 Series (With LEDs) Mechanicals (not PoE Enabled) Unless otherwise specified, all tolerances are ± J401.C (6/06)

6 2 X 4 J2 Series (With LEDs) Mechanicals (not PoE Enabled) Unless otherwise specified, all tolerances are ± J401.C (6/06)

7 2 X 6 J2 Series (With LEDs) Mechanicals (not PoE Enabled) Unless otherwise specified, all tolerances are ± J401.C (6/06)

8 2 X 8 J2 Series (With LEDs) Mechanicals (not PoE Enabled) Unless otherwise specified, all tolerances are ± J401.C (6/06)

9 J2 Series (No LEDs) Schematics (not PoE Enabled) J2039 PCB SIDE TO PHY TD+ RD+ 2 RX- TD- RD- CHS GND 1 :1 TRANSMIT 1 :1 RECEIVE.001m F NOTE: Connect CHS GND to PCB ground. 3 TX+ 6 TX- 1 RX CABLE SIDE CH 1 CH 3 CHS GND RD+ N/C TD+ TD TD+ N/C RD+ TD- RD RD- CHS GND RD- RD TD- TD TD- RD RD-CHS GND RD- RD TD- TD CHS GND RD+ N/C TD+ TD TD+ N/C RD+ CHANNELS 1-4 (REPEAT FOR 5-8, 9-12, AND 13-16) CH 4 CH 6 CH 5 CH 8 CH 7 NOTE: This applies to 2x4, 2x6, and 2x8 configurations. J2042 PCB SIDE TO PHY TD+ RD+ 2 RX- TD- RD- 1 :1 TRANSMIT 1 :1 RECEIVE 7.001m F CHS GND 8 NOTE: Connect CHS GND to PCB ground. 3 TX+ 6 TX- 1 RX+ 4 5 CABLE SIDE RD- N/C TD RD- RD+ N/C TD RD- RD+ CHS GND TD- TD+ RD CHS GND TD- TD+ RD RD TD+ TD- CHS GND RD TD+ TD- CHS GND RD+ RD- TD N/C RD+ RD- TD N/C CHANNELS 1-4 (REPEAT FOR 5-8, 9-12, AND 13-16) CH 4 CH 6 CH 8 CH 1 CH 3 CH 5 CH 7 NOTE: This applies to 2x4, 2x6, and 2x8 configurations. J2045 PCB SIDE TO PHY TD+ RD+ 2 RX- TD- 1 :1 TRANSMIT 1 :1 RECEIVE 7.001m F CHS GND 8 NOTE: Connect CHS GND to PCB ground. 3 TX+ 6 TX- 1 RX+ 4 5 CABLE SIDE TD N/C TD+ RD+ CHS GND TD- RD RD- CHS GND TD- RD RD- RD- RD TD- CHS GND RD+ TD+ N/C TD RD+ TD+ N/C TD CHANNELS 1-4 (REPEAT FOR 5-8, 13-16) CH 4 CH 1 CH 3 CH 6 CH 8 CH 5 CH 7 TD N/C TD+ RD+ RD- RD TD- CHS GND NOTE: This applies to 2x4, 2x6, and 2x8 configurations. 9 J401.C (6/06)

10 J2 Series (No LEDs/PoE Enabled) Schematics J /19 RD2- N/C TD4+ RD4+ PWR4- PWR2- TD PWR4+ PWR2+ TD2- RD2+ TD4- RD4- RD1- TDI- RD3+ TD3- PWR3+ PWR RD1+ TD1+ N/C RD3- TD3+ PWR3- PWR1- CHANNELS 1-4 (REPEAT FOR 5-8, 13-16) CH 4 CH 6 CH 8 CH 1 CH 3 CH 5 CH 7 NOTE: This applies to 2xN PoE enabled configurations. 10 J401.C (6/06)

11 J2 Series (With LEDs) Schematics (not PoE Enabled) J /14/15/16 PCB SIDE TO PHY TD+ RD+ 2 RX- TD- RD- CHS GND 1 :1 TRANSMIT 1 :1 RECEIVE.001m F NOTE: Connect CHS GND to PCB ground. 3 TX+ 6 TX- 1 RX CABLE SIDE TD N/C TD+ RD+ CHS GND TD- RD RD- CHS GND TD- RD RD- RD- RD TD- CHS GND RD+ TD+ N/C TD RD+ TD+ N/C TD CHANNELS 1-4 (REPEAT FOR 5-8, 13-16) CH 4 CH 1 CH 3 CH 6 CH 8 CH 5 CH 7 TD N/C TD+ RD+ RD- RD TD- CHS GND NOTE: This applies to LED 2xN configurations. LED Configuration Green Coon Yellow For More Information: Pulse Worldwide Headquarters World Trade Drive San Diego, CA U.S.A. TEL: FAX: Pulse Northern Europe 3 Huxley Road Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: FAX: Standard LED Forward 2 Typical LED Color Wavelength 1 (V MAX) (V TYP) Green nm Yellow nm LED intensity/wavelength measured with Photo Research PR-650 Colormeter 2. With a forward current of 20 ma Pulse Southern Europe Zone Industrielle F Orgelet France TEL: FAX: Pulse China Headquarters No. 1 Industrial District Changan, Dongguan China TEL: FAX: Pulse North China Room 1503 XinYin Building No. 888 YiShan Road Shanghai China TEL: /2 FAX: Pulse South Asia 150 Kampong Ampat #07-01/02 KA Centre Singapore TEL: FAX: Pulse North Asia No. 26 Kao Ching Road Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. TEL: FAX: Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, Pulse Engineering, Inc. All rights reserved. 11 J401.C (6/06)