26 HD Ready Digital LCD TV with DVD Player

Transcription

1 26 HD Ready Digital LCD TV with DVD Player Instruction Manual L26DVDB10 L26DVDB10_IB_final110210_running change3.indd 1 10/02/2011 3:36 PM

2 Contents Preparation... 4 Unpacking the TV...4 Installing / Removing the Base Stand...5 Front View and Controls...6 Rear View and Sockets...7 Installing Batteries in the Remote Control...8 Remote Control Operation Range...8 Remote Control...9 Connections Making Video and Audio Connections Connecting an AV Device with an HDMI Cable Connecting a Computer with a VGA Cable Connecting an AV Device with a Component (YPbPr) Cable Connecting an AV Device with a SCART Cable Connecting an AV Device with a Composite Cable Connecting a SPDIF Audio Receiver Connecting a USB Storage Device Connecting the Aerial Initial Setup Turning the TV on for the First Time Selecting the Input Source Channel Selection Display Channel Information Volume Adjustment Using the Features Customising the Channel Setting (TV, DTV or Radio Mode) Auto Install DTV Manual Install ATV Manual Install Channel Edit CI (Common Interface) Information Customising the Picture Setting Customising the Sound Setting Customising the Time Settings Customising the Option Setting Language Audio Language (DTV Mode) Subtitle Language (DTV Mode) Factory Reset Customising the LOCK Setting Lock System Change Password Block Channel Parental Guidance Teletext (TV Mode) To Turn on Teletext Function Digital Teletext (DTV Mode) Teletext within Digital Service EPG (Electronic EPG (Electronic (DTV Mode) Switch On/Off EPG View a Programme L26DVDB10_IB_final110210_running change3.indd 2 10/02/2011 3:36 PM

3 ...34 Using the Built-in DVD Player Compatible Disc Types Supported Formats Region Code Basic DVD Playback Functions Playing the DVD Menu Playback (for DVD) Stopping Playback Previous / Next (for DVD / CD / Multimedia discs) Forward / Backward (for DVD / CD / Multimedia discs) Pause (for DVD / CD / Multimedia discs) Repeat (for DVD / CD / Multimedia discs) Display (for DVD) Goto (for DVD / CD / Multimedia discs) Audio (for DVD / CD) Program (for DVD) Using the DVD Language Setup Page OSD Language Subtitle Audio DVD Menu Using the DVD Video Setup Page Aspect Ratio TV System Using the DVD Rating Setup Page Parental Control Set the Password Using the MISC Setup Page MISC Setup Playing Multimedia Discs MP3/WMA/JPEG PLAYBACK PICTURE CD PLAYBACK Image rotation CARD READER in 1 Card Reader USB Maintenance...40 Hints and Tips Display Modes YPbPr Mode VGA Mode HDMI Mode Specification...44 Safety Warnings L26DVDB10_IB_final110210_running change3.indd 3 10/02/2011 3:36 PM

4 STANDBY DVD MENU SOUND EXIT SLEEP DVD SETUP TV/RADIO ASPECT TEXT EPG FAV INFO DVD/USB/CARD TITLE RETURN DISPLAY PICTURE PBC ANGLE DVD AUDIO SUBTITLE REVEAL HOLD LIST INDEX SUBPAGE SIZE MIX PROGRAM REPEAT A-B MUTE TV AUDIO RECALL/GOTO TV MENU + _ VOL SOURCE + CH _ FREEZE Preparation Preparation Connections Initial Setup Using the Features EPG (Electronic Congratulations on the purchase of your new Logik 26" HD Ready Digital LCD TV with DVD Player. Your new TV has many features and incorporates the latest technology to enhance your viewing experience. We recommend that you spend some time reading this instruction manual in order that you fully understand these features. You will also find some hints and tips to help you resolve any issues. Read all the safety instructions carefully before use and keep this instruction manual for future reference. Unpacking the TV Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations. The following items are included: TV with TV Base (TV Base s P.N.: 102C ) OK Remote Control / AAA Batteries x 2 (P.N.: 504C & ) GB-4 Instruction Manual (P.N.: 4031C V3) Quick Start Guide (P.N.: 4033C V2) Digital TV Switchcover Addendum (P.N.: 4031C261210) If items are missing, or damaged please contact Partmaster (UK only). Tel: for assistance. L26DVDB10_IB_final110210_running change3.indd 4 10/02/2011 3:36 PM

5 Installing / Removing the Base Stand Preparation The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack. 1. Disconnect all cables connected to the TV. 2. Lay the TV down on a flat surface with the back side facing up. Please make sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen. Connections 3. To install the base stand, slide in the base stand until the screw holes are aligned. Secure the base stand with the 4 screws. Remove the base stand before mounting the TV onto the wall. Screw Initial Setup 4. To remove the base stand, untighten the 4 screws that hold the base stand to the rear of the TV. Slide the base stand out. Screws x 4 (P.N.: B1) Unscrew Slide in Using the Features Keep all the screws. You will need them if you want to use the base stand option. 5. Mounting on the wall. This TV is designed to be wallmounted with a standard 200 mm x 100 mm mounting kit designed for flat-panel TVs (sold separately). Mount this TV according to the instructions included in the mounting kit. Due to space restrictions, we recommend that you make all connections (refer to page for details) before mounting on to the wall. Screws x 4 (P.N.: B1) 200 mm Four mounting holes (size M4x27 screw) 100 mm Slide out EPG (Electronic If items are missing, or damaged please contact Partmaster (UK only). Tel: for assistance. GB-5 L26DVDB10_IB_final110210_running change3.indd 5 10/02/2011 3:36 PM

6 Preparation Connections Initial Setup Using the Features EPG (Electronic Front View and Controls Item USB SD/MMC MS 1 POWER LED 2 IR (Infrared Receiver) 3 USB port 4 SD/MMC/MS port Description 1 2 Illuminates green when the TV is turned on. Illuminates red when the TV is in standby mode. The LED will illuminate green when the timer programming has started in the standby mode. Receives IR signals from the remote control. Do not put anything near the sensor, as its function may be affected. Allows the insertion of a USB storage device to play video, audio, photo and text files by using the USB extension cable provided. (DVD Mode) Allows the insertion of a SD/MMC/MS card to play video, audio, photo and text files. (DVD mode) / Press to skip to the beginning of the previous / next chapter or track. (DVD mode) 6 Press to stop playback. (DVD mode) 7 Press to start playback or pause. (DVD mode) 8 Press to eject disc. (DVD mode) 9 SOURCE GB-6 Press to select among different input signal sources: DTV / TV / Scart / AV / DVD / YPbPr / PC / HDMI1 / HDMI2. 10 MENU Displays the OSD (on screen display) menu. 11 CH +/- Press to select a channel or select a sub-menu from the OSD menu. 12 VOL +/- 13 Adjusts the volume. Press to select and adjust a setting in the OSD menu. Switches the TV on from standby. Switches the TV back to standby. L26DVDB10_IB_final110210_running change3.indd 6 10/02/2011 3:36 PM

7 Rear View and Sockets Preparation HEADPHONE Video L AV Connections OFF ON R AC-INPUT V~ 50/60Hz HDMI 1 HDMI 2 VGA INPUT 4 Y Pb Pr AUDIO VGA INPUT COMMON INTERFACE CARD FACE FRONT ANT SCART Initial Setup L R SPDIF Using the Features Item Description 1 AC~INPUT Connects the mains cable to the mains socket. 2 HDMI1 / 2 To connect to a High-Definition (HD) signal output device, such as a set-top box, blu-ray disc player or AV receiver. 3 VGA INPUT / AUDIO To connect to a computer or other devices with a VGA interface. 4 Y, PB, PR To connect to a DVD player, Digital Set-Top-Box, or other AV devices with component (YPbPr) video and audio output sockets. EPG (Electronic 5 AUDIO (L/R) To connect to the AUDIO (L/R) output sockets on audio devices. 6 SPDIF To connect to the audio socket on a digital / standard 5.1 audio system. 7 COMMON INTERFACE Allows the insertion of a Common Access Module. (Refer to page 22 for details) 8 ANT 75 Ω 5V 50mA/Output To connect to the aerial socket on the wall with the RF coaxial cable. 9 SCART To connect to a VCR, DVD Player, or other AV device with a SCART output socket. 10 HEADPHONE To connect earphones for private listening. 11 VIDEO/AUDIO (L/R) To connect to the Composite VIDEO and AUDIO (L/R) output sockets on external video devices. GB-7 L26DVDB10_IB_final110210_running change3.indd 7 10/02/2011 3:36 PM

8 STANDBY DVD MENU SOUND EXIT SLEEP DVD SETUP TV/RADIO ASPECT TEXT EPG FAV INFO DVD/USB/CARD TITLE RETURN DISPLAY PICTURE PBC ANGLE DVD AUDIO SUBTITLE REVEAL HOLD LIST INDEX SUBPAGE SIZE MIX PROGRAM REPEAT A-B MUTE TV AUDIO RECALL/GOTO TV MENU + _ VOL OK SOURCE + CH _ FREEZE Preparation Connections Initial Setup Using the Features EPG (Electronic Installing Batteries in the Remote Control 1. Press and lift the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment cover. Handling the Batteries Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property. Only use the battery type indicated in this manual. When the batteries are exhausted, the remote will not function. Replace both batteries at the same time with new ones. Do not install new batteries with used ones and do not mix different types of batteries. Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local regulations. Remote Control Operation Range Handling the Remote Control Take care of your fingernails when you press and hold the battery release tab. Do not drop or cause impact to the remote control. Do not spill water or any liquid on the remote control. Do not place the remote control on a wet object. Do not place the remote control under direct sunlight or near sources of excessive heat. Remove the battery from the remote control when not in use for a long period of time, as it could cause corrosion or battery leakage and may result in physical injury and/or property damage including fire. Point the remote control at the TV no more than 5 metres from the remote control sensor on the TV and within 60 in front of the TV. The operating distance may vary depending on the brightness of the room. GB M L26DVDB10_IB_final110210_running change3.indd 8 10/02/2011 3:36 PM

9 Remote Control Preparation 1 STANDBY Switches the TV between on and standby mode. 2 MUTE Mutes and restores your TV sound Number Button Press to select a programme. 4 TV AUDIO Switches between different audio languages (only applicable when the TV programme has this feature). 1 3 STANDBY MUTE TV AUDIO RECALL/GOTO Connections Press to eject a disc. (DVD mode) 5 RECALL/GOTO Press to return to the previous viewing channel. Press to skip to a specific location on a DVD / CD. (DVD mode) 6 TV MENU Displays the OSD (On Screen Display) menu. 6 8 TV MENU OK SOURCE 7 Initial Setup 7 SOURCE Press to select from different input signal sources: DTV / TV / Scart / AV / DVD / YPbPr / PC / HDMI1 / HDMI2. 8 Allows you to navigate the OSD menus and adjust the system settings to your preference. OK Press to confirm the selection in the OSD menus. 9 DVD MENU Press to display the DVD menu. (DVD mode) 10 EXIT Press to exit the OSD (On Screen Display) menu. 11 SOUND Press to select sound mode: Standard / Music / Movie / Sports / User. 12 VOL + / Adjusts the volume. 13 CH + / Press to select a channel DVD MENU SOUND EXIT + VOL _ SLEEP DVD SETUP TV/RADIO ASPECT TEXT EPG FAV INFO DVD/USB/CARD TITLE RETURN PICTURE PBC ANGLE DISPLAY DVD AUDIO SUBTITLE REVEAL HOLD LIST INDEX + CH _ Using the Features EPG (Electronic 14 PICTURE Press to select picture mode: Standard / Mild / User / Dynamic. 15 SLEEP Sets the TV sleep timer: OFF/10/20/ /180/240 min. 16 ASPECT Allows you to watch the screens in various formats: 4:3 / Auto / 16:9 / Smart Zoom / Zoom / Subtitle. 17 DVD SETUP Press to display and exit the DVD setup menu. (DVD mode) SUBPAGE SIZE MIX PROGRAM REPEAT A-B FREEZE 18 TV/RADIO A short-cut to switch input source to TV / digital radio channels. Display / remove the programme information. 19 TEXT Turns on and off the Teletext function. (TV / DTV mode) GB-9 L26DVDB10_IB_final110210_running change3.indd 9 10/02/2011 3:36 PM

10 Preparation Connections Initial Setup Using the Features EPG (Electronic 20 EPG Displays the EPG (Electronic. (DTV mode) GB-10 Press to start playback or pause. (DVD mode) 21 FAV Displays the Favourite Channel List. (TV / DTV mode) Stop Press to stop playback. (DVD mode) 22 INFO Displays the present screen information such as the current channel and the input source. 23 Coloured buttons (RED / GREEN / YELLOW / BLUE) Press to access the TELETEXT items or programme edit when using Digital / Freeview TV Channels. (TV / DTV mode) DVD/USB/CARD (red) Switch input source. (DVD mode) TITLE (green) Displays the DVD title content. (DVD mode) PBC (yellow) Switches the PBC (Playback Control) On / Off (only applicable when the VCD has this feature). (DVD mode) ANGLE (blue) Press to select different angles for the video. (DVD mode) 24 Press to advance or reverse playback rapidly. 25 Press to skip to the beginning of the previous or next chapter / track / photo. (DVD mode) 26 RETURN Displays the DVD title menu or plays the first title. (DVD mode) DISPLAY Displays the present screen information such as the current title / chapter. (DVD mode) DVD AUDIO Changes the audio language or audio channel. (DVD mode) SUBTITLE Displays subtitles which are broadcast with the programme. (TV / DTV mode) Displays subtitles on the DVD. (DVD mode) 21 STANDBY TV MENU DVD MENU SOUND EXIT + VOL _ SLEEP DVD SETUP TV/RADIO ASPECT TEXT EPG FAV INFO DVD/USB/CARD TITLE RETURN PICTURE PBC ANGLE DISPLAY DVD AUDIO SUBTITLE REVEAL HOLD LIST INDEX SUBPAGE SIZE MIX PROGRAM REPEAT A-B MUTE TV AUDIO RECALL/GOTO OK SOURCE CH _ FREEZE L26DVDB10_IB_final110210_running change3.indd 10 10/02/2011 3:36 PM

11 Connections Initial Setup Preparation 27 REVEAL Reveals hidden information such as the answer to a quiz in Teletext. (TV mode) HOLD Freezes a multi-page passage on screen in Teletext. (TV mode) LIST The user can set four favourite pages to be directly linked to the four colour keys. While list mode is activated, it is not possible to use TOP or FLOF navigation with the colour keys. The favourite page numbers should be stored and restored to/from nonvolatile memory for each channel by the system software. (TV / DTV mode) Displays the text page on the teletext screen. (TV mode) INDEX Press to select the page number of the Index from teletext. (TV mode) 28 SUBPAGE Displays the subpage on the teletext screen. (TV mode) PROGRAM Press to program and view the selected starting point of a chapter and title REPEAT on the DVD disc. (DVD mode) 29 SIZE Press to enlarge the picture on the TV in teletext. (TV mode) REPEAT Press to select between different repeat modes REPEAT CHAPTER / REPEAT TITLE / REPEAT OFF. (DVD mode) 30 MIX Press to select TELETEXT with a TV programme. A B Repeat a segment between A and B. (DVD mode) 31 FREEZE Press to freeze a picture on screen. 27 STANDBY TV MENU DVD MENU SOUND EXIT + VOL _ SLEEP DVD SETUP TV/RADIO ASPECT TEXT EPG FAV INFO DVD/USB/CARD TITLE RETURN PICTURE PBC ANGLE DISPLAY DVD AUDIO SUBTITLE REVEAL HOLD LIST INDEX SUBPAGE SIZE MIX PROGRAM REPEAT A-B MUTE TV AUDIO RECALL/GOTO OK SOURCE + CH _ FREEZE Using the Features EPG (Electronic GB-11 L26DVDB10_IB_final110210_running change3.indd 11 10/02/2011 3:36 PM

12 CARD FACE FRONT Connections Preparation Connections Initial Setup Using the Features EPG (Electronic Making Video and Audio Connections Not all AV devices have the ability to connect to a TV, please refer to the owner s manual of your AV device for compatibility and connection procedures. When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are complete. Best Video Performance HDMI VGA INPUT Signal Type HDMI (480i/480p/576i/576p/720p/1080i/1080p*) VGA Y Pb Pr Component Video (480i/480p/576i/576p/720p/1080i/1080p*) SCART SCART (RGB Input) Composite Video Separate audio connection required *1080p: Although this TV is compatible with a 1080p input, the screen is not capable of displaying this resolution and consequently the image will be scaled to suit the screen. Connecting an AV Device with an HDMI Cable This TV can accept High-Definition Multimedia Interface (HDMI) supports HDCP (High-Bandwidth Digital Content Protection) Protocol. When you connect to the output of an HD ready player (blu-ray disc player, game console, set-top box or computer) switch to the HDMI function and the TV will automatically detect the resolution used by the HDMI source. To get the best picture quality, adjust the blu-ray disc player, game console or set-top box output resolution up to 1920 x 1080p. 1. Use a HDMI cable to connect the TV s HDMI input socket to the external AV device s HDMI output socket. 2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch at the side of the TV. 3. Press the button on the side panel of the TV or on the remote control to turn on your TV. 4. Press the SOURCE button to display the Source List. Use the buttons to select HDMI and then press the OK button to confirm. AC-INPUT V~ 50/60Hz HDMI 1 HDMI 2 VGA INPUT HDMI Cable (not included) Rear View of TV Y Pb Pr L R SPDIF AUDIO VGA INPUT No Yes Yes No Yes COMMON INTERFACE ANT SCART GB-12 Although this TV is able to connect to a HDMI device, it is possible that some devices may not operate correctly. Game Console Set-top Box Blu-ray Player / DVD Player / Recorder L26DVDB10_IB_final110210_running change3.indd 12 10/02/2011 3:36 PM

13 L CARD FACE FRONT CARD FACE FRONT Connecting a Computer with a VGA Cable Preparation 1. Use a VGA cable to connect the TV s VGA input socket to a computer s VGA output socket. Use an audio cable to connect the TV s PC AUDIO input socket to the computer s audio output socket. AC-INPUT V~ 50/60Hz HDMI 1 HDMI 2 VGA INPUT Rear View of TV Y Pb Pr L R SPDIF AUDIO VGA INPUT COMMON INTERFACE ANT SCART 2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch at the side of the TV. 3. Press the button on the side panel of the TV or on the remote control to turn on your TV. VGA Cable (not included) Audio Cable (not included) Connections 4. Press the SOURCE button to display the Source List. Use the buttons to select PC and then press the OK button to confirm. The best resolution is 1360 * 768. If your computer is set to shut down after a few minutes of idle mode, the TV will also switch to standby due to no signal being received, this is to save energy. Press the button on the side panel of the TV or on the remote control to restart the TV. Computer Connecting an AV Device with a Component (YPbPr) Cable Initial Setup Using the Features 1. Use a component cable to connect the TV s YPbPr input sockets to an external AV device s component output sockets. 2. Use an AV cable to connect the TV s AUDIO(L/R) input sockets to the external AV device s component audio output sockets. (Audio Left = white, and Audio Right = red) Component port on the TV Y Pb Pr Video output ports on DVD player Y Pb Pr Y Cb Cr 3. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch at the side of the TV. 4. Press the button on the side panel of the TV or on the remote control to turn on your TV. 5. Press the SOURCE button to display the Source List. Use the buttons to select YPbPr and then press the OK button to confirm. AC-INPUT V~ 50/60Hz Y Component Cable (not included) Y HDMI 1 HDMI 2 Y Pb/Cb Pb/Cb Pb VGA INPUT Pr/Cr Pr/Cr Pr Y Pb Pr L R SPDIF White (L) R White (L) Red (R) AV Cable (included) Red (R) COMPONENT OUT Yellow (Video) AUDIO VGA INPUT Rear View of TV Yellow (Video) COMMON INTERFACE ANT SCART EPG (Electronic Video Camera Game Console Blu-ray Player / DVD Player / Recorder Set-top Box Satellite Receiver GB-13 L26DVDB10_IB_final110210_running change3.indd 13 10/02/2011 3:36 PM

14 CARD FACE FRONT Preparation Connections Initial Setup Using the Features EPG (Electronic Connecting an AV Device with a SCART Cable 1. Use a SCART cable to connect the TV s SCART input socket to an external AV device s SCART output socket. 2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch at the side of the TV. 3. Press the button on the side panel of the TV or on the remote control to turn on your TV. 4. The TV will change the input source to SCART automatically once the AV device is switched on. Connecting an AV Device with a Composite Cable 1. Use an AV cable to connect the TV s AUDIO(L/R)/ VIDEO input sockets to an external AV device s composite audio/video sockets. (Video = yellow, Audio Left = white, and Audio Right = red) 2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch at the side of the TV. 3. Press the button on the side panel of the TV or on the remote control to turn on your TV. 4. Press the SOURCE button to display the Source List. Use the buttons to select AV and then press the OK button or to confirm. AC-INPUT V~ 50/60Hz AV Cable (included) HDMI 1 HDMI 2 VGA INPUT VCR Rear View of TV DVD Player / Recorder Yellow (VIDEO) White (L) Red (R) Side View of TV HEADPHONE Video L R Red (R) Y Pb Pr L R SPDIF AV White (L) Yellow (VIDEO) AUDIO VGA INPUT COMMON INTERFACE SCART Cable (not included) Set-top Box ANT Satellite Receiver DVD Player / Recorder SCART GB-14 Video Camera VCR Game Console Set-top Box Satellite Receiver L26DVDB10_IB_final110210_running change3.indd 14

15 CARD FACE FRONT Connecting a SPDIF Audio Receiver Preparation For better sound quality, you may want to play the DVD audio through your multi-channel audio receiver. AC-INPUT V~ 50/60Hz HDMI 1 HDMI 2 Rear View of TV Y Pb Pr VGA INPUT L R SPDIF AUDIO VGA INPUT COMMON INTERFACE ANT SCART 1. Use an audio cable to connect the TV s SPDIF output socket to an external audio receiver s audio SPDIF input socket. 2. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch at the bottom of the TV. Audio Cable (not included) Connections 3. Press the button on the side panel of the TV or on the remote control to turn on your TV and your audio receiver and then select SPDIF to "ON" in the SOUND menu of your TV. The TV's volume control will have no effect. You may control the audio level via the Audio Receiver. Initial Setup Connecting a USB Storage Device Using the Features 1. Switch off the TV before connecting any USB storage device. Side View of TV 2. Connect your USB storage device to the USB port of your TV. 3. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch at the side of the TV. 4. Press the button on the side panel of the TV or on the remote control to turn on your TV and your audio receiver and then set it to DVD mode. 5. Press the RED button on the remote control and then press the buttons to select USB or SD/MMC/MS, press the OK button to confirm. USB SD/MMC MS OR USB USB Cable EPG (Electronic If a hard disk is used, make sure its mains adapter is connected to the mains supply. Portable hard Disk If a USB hub is used, make sure its mains adapter is connected to the mains supply as the total current consumption may exceed 500mA. If a USB hub is used, you may refer to the Recording Device on page 38 for details on selecting the active device when several USB storage devices are connected. The maximum supported storage space of the hard disk is 160 GB. The file system only supports FAT32 format. If you want to store the video streaming of a DTV programme, the transfer rate of the USB storage device must not be less than 5MB/s, otherwise the picture and sound of the programme will be affected and a warning statement will be shown on the screen. If this happens, please upgrade your USB storage device. The TV screen will be blank temporarily as it will take time to start up and stabilise the connected hard disk. This is normal and the starting time may vary depending on the brand and the memory size of the connected hard disk. Disconnect the USB storage device if it is not in use. Adapter GB-15 L26DVDB10_IB_final110210_running change3.indd 15

16 AC-INPUT V~ 50/60Hz Y Pb Pr L R COAXIAL VGA INPUT COMMON INTERFACE CARD FACE FRONT Preparation Connections Initial Setup Using the Features EPG (Electronic Connecting the Aerial Connect one end of the RF coaxial cable to the aerial socket on the wall and the other end of the cable to the RF (75Ω) socket at the bottom of your TV. Do not connect the TV to the mains supply until you have completed all the connections. HDMI 1 HDMI 2 VGA INPUT AUDIO ANT SCART OR RF coaxial cable (not included) GB-16 L26DVDB10_IB_final110210_running change3.indd 16

17 Initial Setup Turning the TV on for the First Time Preparation 1. Connect the mains cable to the mains socket after you have completed all the connections. 2. Switch on the POWER ON/OFF switch at the back of the TV. At this stage, the TV switches to standby mode. The power LED on the front panel of the TV will illuminate. 3. In standby mode, press the button on the side panel of the TV or on the remote control to turn the TV on. To the mains socket STANDBY OFF ON Connections Always disconnect the TV from the mains socket when not in use for a long period of time. The button on the side panel of the TV or on the remote control is only used for switching the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the mains power, please remove the mains plug from the mains socket. Initial Setup 4. The first time you turn the TV on, it will go straight into the INSTALLATION GUIDE menu. (If you have already installed the TV using the Quick Start Guide, please go to the next step Selecting the Input Source on the next page.) 5. The default on-screen menu language is set as English. INSTALLATION GUIDE Language English Auto Tuning Using the Features 6. Press the button and then press the OK button or the button to select Auto Tuning. INSTALLATION GUIDE Language English Auto Tuning EPG (Electronic 7. A pop-up screen will be displayed, press the OK button on the remote control to start the Auto Tuning. Select Cancel on the screen or press the EXIT button to cancel the new installation. An installation reminder will appear the next time you turn on the TV. INSTALLATION GUIDE Language English Auto Tuning Please ensure aerial is plugged in!! Then press OK button. GB-17 L26DVDB10_IB_final110210_running change3.indd 17

18 Preparation Connections Initial Setup Using the Features EPG (Electronic Selecting the Input Source 1. Press the SOURCE button to display the input source list. 2. Press the buttons to select the input source that you want: DTV / TV / Scart / AV / DVD / YPbPr / PC / HDMI1 / HDMI2. 3. Press the OK button to confirm your selection. Alternative Press the TV/RADIO button to switch to digital radio channels directly. Press it again to return to the previous DTV channel. Channel Selection Press the CH + / buttons on the remote control repeatedly or the 0-9 buttons to select the channel. Press the FAV button to view the Favourite List. Then use the buttons to highlight and select the favourite channel if you have previously preset your favourite channels. Press the OK button to confirm the setting. Press the RECALL/GOTO button to return to the previously viewed channel. If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the channel will then be unlocked (refer to page 30 for details on Block Channel). Display Channel Information Press the INFO button to view the current information. Volume Adjustment Press the VOL + or button on the side panel of the TV or on the remote control to adjust the volume. Input Source DTV TV Scart AV DVD YPbPr PC HDMI1 HDMI2 If you wish to switch the sound off, press the MUTE button, press the MUTE button again or the VOL + button to resume audio listening. GB-18 L26DVDB10_IB_final110210_running change3.indd 18

19 Using the Features Customising the Channel Setting (TV, DTV or Radio Mode) Auto Install Use this to automatically find and store all available channels. This is normally recommended if some channels have been added or removed by the broadcaster or if you have moved house. 1. Press the TV MENU button and then press the buttons to select the CHANNEL menu. CHANNEL Preparation Connections 2. Press the button to select Auto tuning and then press the OK button or the button to confirm. Auto tuning DTV Manual tuning ATV Manual tuning Channel edit CI information Initial Setup 3. A pop-up screen will be displayed, press the OK button to select Start on the screen to start the auto tuning. Auto tuning will commence. This operation may take up to 15 minutes. The display will show the progress of the tuning and the number of channels found. Please ensure aerial is plugged in!! Then press OK button. Channel Tuning TV TV : 0 Channel(s) DTV : 0 Channel(s) Radio : 0 Channel(s) Press<Menu> to skip. Press<Exit> to skip. Using the Features EPG (Electronic 4. If you want to skip the DTV tuning, press the TV MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select Yes and then press the OK button to confirm. You will then go straight to ATV tuning. You may repeat the above step if you also want to skip the ATV tuning. 5. After tuning is complete, press the EXIT button to exit. The channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Channel Edit under the channel menu (refer to page 21 for details). Saving TV : 10 Channel(s) DTV : 10 Channel(s) Radio : 20 Channel(s) GB-19 L26DVDB10_IB_final110210_running change3.indd 19

20 Preparation Connections Initial Setup Using the Features EPG (Electronic DTV Manual Install Allows you to make manual fine tuning adjustments of the channel under DTV mode. 1. Press the TV MENU button and then press the buttons to select the CHANNEL menu. 2. Press the button to select DTV Manual tuning and then press the OK button or the button to confirm. 3. The DTV Manual Install screen will pop up. Press the buttons to select the desired UHF channel and then press the OK button to commence the search of that channel. When the signal has been tuned, the picture and signal strength will be displayed on the screen. 4. Press the TV MENU button to return back to the previous menu. 5. Press the EXIT button to exit the menu. ATV Manual Install Allows you to make manual fine tuning adjustments if the channel reception is poor under TV mode. 1. Press the TV MENU button and then press the buttons to select the CHANNEL menu. 2. Press the button to select ATV Manual tuning and then press the OK button or the button to confirm. Auto tuning DTV Manual tuning ATV Manual tuning Channel edit CI information Auto tuning DTV Manual tuning ATV Manual tuning Channel edit CI information CHANNEL DTV Manual Tuning UHF CH 23 Please select channel then press OK to search Bad Normal Good CHANNEL GB-20 L26DVDB10_IB_final110210_running change3.indd 20

21 3. The ATV Manual Install screen will pop up. Use the buttons to select the following options and the buttons to adjust the setting. Storage To System Current CH Presets the channel number. Selects the sound system: I / DK / L / BG (for SECAM). Displays the current channel number. Search Press the buttons to start the manual tuning. Fine-Tune Press the buttons to make manual fine tuning adjustments. ATV Manual Tuning Storage To 1 System Current CH Search Fine-Tune Skip Frequency BG 1 Yes MHz Preparation Connections Skip Frequency Skips the current channel. Displays the current tuned frequency. 4. After finishing all the manual tuning adjustments, press the RED button to save your settings. 5. Press the TV MENU button to return back to the previous menu. 6. Press the EXIT button to exit the menu. Initial Setup Channel Edit Allows you to edit TV programmes in the Channel List. 1. Press the TV MENU button and then press the buttons to select the CHANNEL menu. Using the Features 2. Press the button to select Channel edit and then press the OK button or the button to confirm. 3. A Channel Edit screen will pop up. Press the buttons to select the programme you want to edit. a. Delete Press the RED button twice to delete the selected channel. b. Rename (ATV channels) Press the GREEN button to rename the selected channel. Press the buttons to select the characters to represent the station name. Press the buttons to move to the next character and then press the GREEN button again to confirm the new name. c. Move (ATV channels) Press the YELLOW button and then press the buttons to move to the selected channel. Press the YELLOW button or the TV MENU button to confirm. d. Skip Press the BLUE button to skip the selected channel. Press the BLUE button again to undo it. e. FAV (Favourite) Press the FAV button to set the selected channel as one of the favourite programmes. Press the FAV button again to undo it. 4. Press the TV MENU button to return back to the previous menu. 5. Press the EXIT button to exit the menu. Auto tuning DTV Manual tuning ATV Manual tuning Channel edit CI information Care should be taken when editing the position of digital channels as this may affect EPG and reminder settings. DTV DTV DTV TV TV TV TV TV TV TV CHANNEL Channel Edit Delate Remane Move Skip Fav GB-21 EPG (Electronic L26DVDB10_IB_final110210_running change3.indd 21

22 CARD FACE FRONT Preparation Connections Initial Setup Using the Features EPG (Electronic CI (Common Interface) Information The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These services are provided by TopUp TV (UK only) and others. The Common Access Module and viewing card can be obtained from the service provider. Do not repeatedly insert or remove the Common Access Module as this may damage the interface and cause a malfunction. This feature is not available in all countries. To insert the Common Access Module 1. Before you insert the Common Access Module, ensure that the TV is switched off and the viewing card is inserted in accordance with the Service Provider s instructions. 2. Insert the Common Access Module into the slot. Flip the Common Access Module to another side and try again if you feel resistance. 3. Switch the TV on. To remove the Common Access Module 1. Before you remove the Common Access Module, ensure that the TV is switched off. 2. Pull the Common Access Module from the slot. 3. Switch the TV on. To view the module information 1. Press the TV MENU button and then use the buttons to select the CHANNEL menu. 2. Press the button and then the OK button or the button to select CI Information. AC-INPUT V~ 50/60Hz HDMI 1 HDMI 2 VGA INPUT Rear View of TV Y Pb Pr L R SPDIF AUDIO VGA INPUT COMMON INTERFACE ANT SCART CI (Common Interface) Allows the Common Access Module to be inserted and access the content that has been encrypted. COMMON INTERFACE CARD FACE FRONT ANT Common Access Module Auto tuning DTV Manual tuning ATV Manual tuning Channel edit CI information CHANNEL 3. A CI Information Main menu will pop up. Press the buttons to display the Module Information, Smart Card Information, Language, Software Download. Press the OK button to confirm. 4. Press the TV MENU button to return back to the previous menu. 5. Press the EXIT button to exit the menu. Main menu Module Information Smart Card Information Language Software Download Press OK to select, or EXIT to quit GB-22 This screen is for illustration purposes only. L26DVDB10_IB_final110210_running change3.indd 22

23 Customising the Picture Setting Preparation Allows you to set your preferred picture mode. 1. Press the TV MENU button and then press the buttons to select the PICTURE menu. PICTURE PICTURE Connections Picture Mode Contrast Brightness Colour Sharpness Tint Dynamic Colour Temperature Red Green Blue Aspect Ratio Noise Reducion Screen Medium 16:9 ON Initial Setup 2. Press the button and then press the buttons to select the following options. Press the buttons to adjust each option s setting. Picture Mode Contrast Cycles among picture mode: Standard / Mild / User / Dynamic. Alternative You may press the PICTURE button to select the picture mode directly. Adjusts the difference between light and dark levels in the picture. (for User mode) Using the Features Brightness Increases or decreases the amount of white in the picture. (for User mode) Colour Sharpness Tint (For NTSC format) Colour Temperature Controls the colour intensity. (for User mode) Adjusts the level of crispness in the edges between light and dark areas of the picture. Adjusts the balance between red and green levels. (Tint is only available for NTSC signal reception.) Adjusts the colour components independently to achieve a warm or cool. Red: Increases red tint Green: Increases green tint Blue: Increases blue tint EPG (Electronic GB-23 L26DVDB10_IB_final110210_running change3.indd 23

24 Preparation Connections Initial Setup Using the Features EPG (Electronic Aspect Ratio Allows you to watch the screen in various picture formats: 4:3 / Auto / 16:9 / Smart Zoom / Zoom / Subtitle. 4:3 This selection will allow you to view a picture with an original 4:3 aspect ratio. Black bars will appear on both the left and right of the screen. Auto Input Signal 4:3 Input Signal 16:9 This selection will display the picture according to the aspect ratio of the input source. 16:9 This selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen. Smart Zoom Zoom Subtitle This selection is similar to 16:9 mode, but the picture slightly stretches vertically and clips off a little from the top and bottom. This selection will allow you to zoom in the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. This selection will allow you to zoom in the picture without any alternation, while filling the entire screen with subtitles shown at the bottom of the screen. This selection will allow you to adjust the picture horizontally, in linear proportion. Black bars will appear on both the left and right of the screen. This selection will display the picture according to the aspect ratio of the input source. This selection will allow you to view a picture with an original 16:9 aspect ratio. This selection is similar to 16:9 mode, but the picture slightly stretches vertically and clips off a little from the top and bottom. This selection will allow you to zoom in the picture without any alteration, while the 4 sides of the picture will be cropped. This selection will allow you to zoom in the picture without any alternation, while showing subtitles at the bottom of the screen. GB-24 Noise Reduction Screen Select to reduce the noise level of the connected device: On / Off. (TV mode) Allows you to adjust the PC desktop content. (PC mode only) Auto Adjust Horizontal Pos. Vertical Pos. Size Phase Allows you to synchronise a PC signal automatically. Adjusts the position of the picture left and right in the window. Adjusts the position of the picture up and down in the window. Allows you to adjust the picture horizontally, in linear properties 3. Press the TV MENU button to return to the previous menu. 4. Press the EXIT button to exit the menu. Controls the signal phase, which can improve focus clarity and image stability based on the PC mode. Auto Adjust Horizotal Pos. Vertical Pos. Size Phase PICTURE L26DVDB10_IB_final110210_running change3.indd 24

25 Customising the Sound Setting Preparation Allows you to select an audio-enhancement technique. 1. Press the TV MENU button and then press the buttons to select the SOUND menu. Sound Mode Treble SOUND Standard 50 Connections Bass 50 Balance 50 Auto Volume Off Surround Sound Off 2. Press the button and then the buttons to select the following options. Press the buttons to adjust each option s setting. Spdif Off Initial Setup Sound Mode Allows the selection of an audio-enhancement technique: Standard / Music / Movie / Sports / User. Treble Bass Balance Auto Volume Surround Sound SPDIF Alternative You may press the Sound button to select the sound mode directly. Controls the relative intensity of higher pitched sounds. Controls the relative intensity of lower-pitched sounds. Adjusts the relative volume of the speakers in a multiple speaker system. Volume levels are automatically controlled. (e.g. advertisements tend to be louder than the programmes) Allows the selection of surround sound: Surround / Off. Allows the selection of a Digital Optical Audio output: On / Off. 3. Press the TV MENU button to return to the previous menu. 4. Press the EXIT button to exit the menu. Using the Features EPG (Electronic Customising the Time Settings Allows you to adjust power on/off time, sleep time. 1. Press the TV MENU button and then press the buttons to select the TIME menu. Clock TIME Off Time Off On Time Off Sleep Timer Auto Sleep Time Zone Off Off Canary GMT GB-25 L26DVDB10_IB_final110210_running change3.indd 25

26 Preparation Connections Initial Setup Using the Features EPG (Electronic 2. Press the button and then the buttons to select the following options. Press the buttons to adjust each option s setting. Clock Off Time On Time Sleep Timer Auto Sleep Time Zone Customising the Option Setting Language The clock is set automatically when receiving a digital signal. Allows you to set the off time that the TV will switch off automatically. Allows you to set the on time that the TV will switch on automatically and tune to the channel you select. The sleep timer automatically switches the TV to standby after the preset time has elapsed. The clock will be set automatically when receiving a digital signal. Time must be set before using Sleep Timer function. Press the buttons to select a period of time after which the TV automatically switches to standby mode: OFF / 10 / 20 / / 180 / 240 min. The timer begins to count down from the number of minutes selected. Allows you to select your desired on screen menu language. \ If you turn the TV off after setting the sleep timer, the sleep timer setting will be erased. Alternative 1. You may press the SLEEP button repeatedly to select the number of minutes: OFF / 10 / 20 / / 180 / 240 min directly. 2. To cancel the sleep time, press the SLEEP button repeatedly until Off appears. You can select Auto Sleep to on or off. When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal. 3. Press the TV MENU button to save the settings and return back to the previous menu. 4. Press the EXIT button to exit the menu. 1. Press the TV MENU button and then press the buttons to select the OPTION menu. 2. Press the button to select Language. The default on-screen menu language is set as English. 3. Press the TV MENU button to return back to the previous menu. 4. Press the EXIT button to exit the menu. OPTION Language Audio Language Subtitle Language Country Restore Factory Default English English English UK GB-26 L26DVDB10_IB_final110210_running change3.indd 26

27 Audio Language (DTV Mode) Allows you to select your desired audio language. (Available for digital channels if multiple audio languages are broadcast.) Preparation 1. Press the TV MENU button and then press the buttons to select the OPTION menu. 2. Press the button to select Audio Language and then press the OK button or the button to confirm. OPTION Language Audio Language Subtitle Language Country Restore Factory Default English English English UK Connections 3. Press the buttons to select the primary audio language and then press the button to select the secondary audio language. Press the button to select the close and then press the OK button to return to the previous menu. OPTION Initial Setup 4. Press the TV MENU button to return back to the previous menu. 5. Press the EXIT button to exit the menu. Language English Audio Language English Subtitle Language English Primary English Country UK. Secondary English Restore Factory Default Close Using the Features Alternative While watching a DTV programme, you can press the TV AUDIO button to display the audio language list. 1. Press the buttons to select an audio language or audio format if available and then press the buttons to select sound track between L/R (Stereo), L/L (Mono Left) and R/R (Mono Right). Press the OK button to confirm and exit. 2. Press the TV MENU button or the EXIT button to return back to the previous screen. For analogue TV programme, press the TV AUDIO button to select Mono / Stereo directly. audio format MPEG EXIT audio language Audio Language English OK sound track EPG (Electronic GB-27 L26DVDB10_IB_final110210_running change3.indd 27

28 Preparation Connections Initial Setup Using the Features EPG (Electronic Subtitle Language (DTV Mode) Allows you to select your desired subtitle language or turn off the subtitle. (Available for digital channels if multiple subtitle languages are broadcast.) 1. Press the TV MENU button and then press the buttons to select the OPTION menu. 2. Press the button to select Subtitle Language and then press the OK button or the button to confirm. 3. Press the buttons to select the primary subtitle language and then press the button to select the secondary subtitle language. Press the buttons to select the secondary subtitle and then press the button to select close. Press the OK button to confirm and exit. 4. Press the TV MENU button to return back to the previous menu. 5. Press the EXIT button to exit the menu. Factory Reset Restores all settings to factory defaults. 1. Press the TV MENU button and then press the buttons to select the OPTION menu. 2. Press the button to select Restore Factory Reset and then press the OK button or the button to confirm. 3. Press the buttons to select Yes and then press the OK button to confirm. The TV will turn off and restart after a few seconds. OPTION Language Audio Language Subtitle Language Country Restore Factory Default OPTION English English English UK Language English Audio Language Primary English English. Subtitle Language Secondary English Country UK Restore Factory DefaultClose OPTION Language Audio Language Subtitle Language Country Restore Factory Default English English English UK GB-28 L26DVDB10_IB_final110210_running change3.indd 28

29 Customising the LOCK Setting Preparation To access the LOCK menu, you must enter the password. Enter the default password 6666 for the first time use. To change the password, refer to Change Password (see below). Lock System Lock System is designed to prevent accidental retuning of the TV / losing channels and prevent children watching unsuitable programmes. The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered when you access Auto Tuning / Manual Tuning / Channel Edit / Installation Guide / Block Channel / Parental Guidance. Connections 1. Press the TV MENU button and then press the buttons to select the LOCK menu. 2. Press the button and then press the 0-9 buttons to enter the password and enter the LOCK menu. 3. Press the buttons to select Lock System and then the buttons to select ON. 4. Press the TV MENU button to return to the previous menu. 5. Press the EXIT button to exit the menu. LOCK Lock System Set Password Block Channel Parental Guidance Off Off Initial Setup Using the Features Change Password 1. Press the TV MENU button and then use the buttons to select the LOCK menu. 2. Press the button and then press the 0-9 buttons to enter the password and enter the LOCK menu. 3. Press the buttons to select Set Password, then press the OK button or the button. Enter the password to proceed. LOCK Lock System Set Password Block Channel Parental Guidance Off Off EPG (Electronic The default password is If you change the password, be sure to remember the new password! If you forget the new password, press the master password 9527 on the remote control. 4. Press the TV MENU button to return to the previous menu. 5. Press the EXIT button to exit the menu. GB-29 L26DVDB10_IB_final110210_running change3.indd 29

30 Preparation Connections Initial Setup Using the Features EPG (Electronic Block Channel Block Channel is designed to prevent children watching unsuitable programmes. The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered. 1. Press the TV MENU button and then use the buttons to select the LOCK menu. 2. Press the button and then press the 0-9 buttons to enter the password and enter the LOCK menu. 3. Press the buttons to select Block Channel, then press the OK button or the button. 4. A Block Channel screen will pop up. Press the buttons to select a channel. Press the GREEN button on the remote control to block or unblock the programme. Press the GREEN button again to unblock. 5. Press the TV MENU button to return to the previous menu. 6. Press the EXIT button to exit the menu. Parental Guidance Lock System Set Password Block Channel Parental Guidance This function allows you to set up blocking schemes to block specific channels and ratings. It operates according to information from the broadcasting station, therefore if the signal has incorrect information, this function will not operate. This allows you to set up blocking schemes to block specific channels and ratings. This TV is programmed to remember which option it was last set to even if you switch the TV off. When a programme is locked or rated with delayed state, the message locked programme is displayed without displaying the password window. The Lock System must be set to On for this function to operate. If the Lock System is set to On, a valid password must be entered. 1. Press the TV MENU button and then use the buttons to select the LOCK menu. 2. Press the button and then press the 0-9 buttons to enter the password and enter the LOCK menu. 3. Press the buttons to select Parental Guidance, then press the buttons to select different rating: Off, 4,, Press the TV MENU button to return to the previous menu. 5. Press the EXIT button to exit the menu. Lock System Set Password Block Channel Parental Guidance LOCK LOCK Off Off Off Off GB-30 L26DVDB10_IB_final110210_running change3.indd 30

31 Teletext (TV Mode) Preparation Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. Using the Teletext control buttons you can view pages of information that are listed in the teletext index. To Turn on Teletext Function Make sure the TV channel you are watching transmits teletext. No Teletext sign will show on the screen if teletext is not available. Connections In TV mode, press the TEXT button to enter Teletext mode. Press the INDEX button to display the index page. Press the TEXT button once to exit and the TV will return to the channel you were watching. To select a page of text Find the number of the page in the index and enter it using the 0-9 buttons. The number of the page will appear on the top left corner of the screen. The page counter will search for your page. When it finds it, the page will be displayed. To move to the next page of text, press the CH + button. To move to the previous page, press the CH button. To return to the index page, enter the 100 by using the 0-9 buttons or press the INDEX button. Mix Press the TEXT button to display the teletext page and then press the MIX button. The text will be superimposed over the TV programme. Press the MIX button again to return to the text page. Double height text If you have difficulty reading the text on the TV you can double the height of the text. Press the SIZE button. The top half of the page will be displayed in double height text. Press the SIZE button again. The bottom half of the page will be displayed in double height text. Press the SIZE button again to return to the full page. Page STOP If the page of text you have selected contains subpages, these subpages will automatically be displayed in order with a delay to allow you to have enough time to read the page. Press the HOLD button. will appear on the top left corner of the screen. While the page is on-hold, press the buttons to scroll through the subpages in your own time. Alternatively, press the SUBPAGE button, use the colour buttons to scroll through the subpages. To Reveal Information Press the REVEAL button to reveal concealed information (quiz answers etc.). Press the REVEAL button again to conceal the information again. Fasttext At the bottom of the teletext screen is a row of subject headings in red, green, yellow and blue. The remote control has a row of colour buttons corresponding to the row of coloured subjects on the screen. Pressing one of the colour buttons will take you directly to the page corresponding to the subject heading. Initial Setup Using the Features EPG (Electronic GB-31 L26DVDB10_IB_final110210_running change3.indd 31

32 Preparation Connections Initial Setup Using the Features EPG (Electronic Digital Teletext (DTV Mode) Some programmes are broadcast with digital teletext and special services, these can be identified in the Info screen when "MHEG" is displayed. Subtitles will vanish while the digital teletext is displayed. Teletext within Digital Service 1. In DTV mode, press the OK button to display the Channel List. Press the buttons and then press the OK button to select the teletext channel. Press the TV MENU button to exit the Channel List and the teletext page will be displayed after a few seconds. Alternative Press the TEXT button while watching some programmes to reveal the teletext page (MHEG). 2. Follow the instructions on digital teletext and move onto the next step by pressing OK,, RED, GREEN, YELLOW, BLUE or 0-9 buttons etc. 3. To change digital teletext service, select a different service by pressing the 0-9 buttons. GB-32 L26DVDB10_IB_final110210_running change3.indd 32

33 EPG (Electronic EPG (Electronic (DTV Mode) Preparation This system has an Electronic Programme Guide (EPG) to help you navigate through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of programme information will vary, depending on the particular broadcaster). This function can be used only when the EPG information is broadcast by broadcasting companies. The EPG displays the programme details for the next 7 days. Switch On/Off EPG 1. Press the EPG button to switch on EPG. 2. Press the EPG button or the EXIT button again to switch off EPG and return to normal TV viewing. View a Programme Press the buttons to select the desired channel and the buttons to view programme schedule. Button Functions in a 7 Days Guide Remote Control Button GREEN (Schedule) current date and time channel no. channel name Programme Guide DTV 801 France 4 20 Feb :07 15:55.16:25 Last Exit Function DTV 800 France France France ARTE 804 LCP 805 France 3 Last Exit 16:00 20 Feb 17:00 Information Movie 1 Programme 2 Programme 3 Programme 4 Programme 5 EXIT INFO Schedule DATE Reminder OK Press the GREEN button to view the preset reminders in the Schedule List. To delete a reminder, press the RED button when on the selected reminder. current channel number and name programme date programme time programme information Connections Initial Setup Using the Features EPG (Electronic YELLOW (Date) BLUE (Remind) Press the YELLOW button and then press the buttons to view schedule of the previous / next day. Press the YELLOW button again to return to the EPG. Press the BLUE button while on the selected programme, the Reminder menu will be displayed. Press the buttons to adjust settings and then press the OK button to confirm the settings. After confirmation, the Schedule List will then be displayed with your preset reminders shown. Press the TV MENU button to return to the EPG. The TV will automatically tune to the selected programme with it starts. DELETE Reminder EXIT Schedule MENU OK INFO or or OK EPG / EXIT Displays detailed information of the selected programme (if available). Press to select a channel. Press to select a programme. Press to confirm and view the selected channel. Press to switch off EPG. GB-33 L26DVDB10_IB_final110210_running change3.indd 33

34 Preparation Connections Initial Setup Using the Features EPG (Electronic Using the Built-in DVD Player 1. Press the SOURCE button and select DVD mode. 2. Insert a disc with the label side facing toward to you. (CD-R, CD-RW, DVD-R, DVD-RW, CD, DVD+R, or DVD+RW). Allow 10 seconds for the player to load the disc. 3. After the disc is inserted, Smart NAVl will show the content of the disc automatically. 4. If the DVD player does not automatically play the disc, press the button on the remote control to start playing. 5. Press the button if you want to remove the disc. Compatible Disc Types Disc Types Disc Logo Recorded Content DVD-VIDEO (Digital Versatile Disc) DVD±RW (Audio/Video format or JPEG files) DVD±R (DVD Recordable - Audio/Video format or JPEG files) CD-R (CD Recordable - Audio/Video format or JPEG files) CD-RW (CD-Rewritable - Audio/Video format or JPEG files) AUDIO-CD (Compact Disc Digital Audio) Supported Formats JPEG The file extensions has to be.jpg and not.jpeg. DVD+ReWritable Pictures encoding must comply with JPEG/ISO format. DVD+R AUDIO + VIDEO AUDIO + VIDEO + JPEG AUDIO + VIDEO + JPEG AUDIO + VIDEO + JPEG AUDIO + VIDEO + JPEG AUDIO This DVD player can only display DCF-standard still pictures or JPEG pictures such as TIFF. Some recorded files may not be able to be played due to the type and format of disc or condition of the recording. Region Code Only insert 12cm discs. Do not insert or play 8cm discs. They will get stuck. Both the DVD player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this DVD player is described on the rear panel of the DVD player. Disc Type DVD-VIDEO Region code GB-34 L26DVDB10_IB_final110210_running change3.indd 34

35 Basic DVD Playback Functions Playing the DVD Depending on the disc, a menu may appear on the TV screen once the disc has loaded. When playing the disc, you may use the button to toggle between Play and Pause mode. This product also supports Menu / Title / Sequential / Program Playback. Menu Playback (for DVD) For DVD discs, the screen will display the DVD Disc Menu (Root Menu). Press the OK button or the button to start from the highlighted content. Press the DVD MENU button to return to the Root Menu when playing the disc. For some DVD discs you may need to press the DVD MENU button or the TITLE button to display the Disc Menu. Stopping Playback Press the button once to stop. Press the button to resume from where you stopped. Press the button twice to stop. Press the button to start from the beginning. In order to protect the disc, press the button and then press the button to eject the disc. When the disc is ejected, hold the disc edge slightly and remove it from the disc slot. When not using the DVD function (in stand-by-mode or using others modes for a long period of time), please take out the disc to protect the DVD loader and the disc. Previous / Next (for DVD / CD / Multimedia discs) Press the Press the button to play the last Title / Chapter / Track. button to play the next Title / Chapter / Track. If the current track is the first one, pressing the button will restart the disc at the beginning. For DVD discs, the above functions may very due to different DVD disc s structure. Forward / Backward (for DVD / CD / Multimedia discs) There are 4 speeds for forward. Press the button to toggle between the different forward options in sequence. (FORWARD x 2 / FORWARD x 4 / FORWARD x 8 / FORWARD x 16 / Play). Press the button to resume normal speed. The sound will be off during Forward or Backward. Preparation Connections Initial Setup Using the Features EPG (Electronic Pause (for DVD / CD / Multimedia discs) For CD / JPEG discs, press the button to pause; press the button again to resume. For DVDs, press the button to pause; press the button again to resume. Repeat (for DVD / CD / Multimedia discs) For CD discs, while playing in sequence, you may use the repeat playback. Press the REPEAT button to toggle between different repeat modes in sequence. (REPEAT (OFF) / REPEAT (SINGLE) / REPEAT (FOLDER)). For DVD discs, you may setup the repeat playback mode. Press the REPEAT button to toggle between different repeat modes in sequence. (REP: (OFF) / REP: (CHAPTER) / REP: (TITLE) ). For JPEG discs, while playing the disc, you may use the repeat playback. Press the REPEAT button to toggle between different repeat modes in sequence. (REPEAT (OFF) / REPEAT (SINGLE) / REPEAT (FOLDER) ). GB-35 L26DVDB10_IB_final110210_running change3.indd 35

36 Preparation Connections Initial Setup Using the Features EPG (Electronic Display (for DVD) Press the DISPLAY button to activate the on screen roll-down menu for the current Title, Chapter, Time and other information. Press the DISPLAY button repeatedly to turn off the on screen display. For JPEG discs, press the DISPLAY button once to display the first page: Disc type, Track -/- (Current / Full). Press the DISPLAY button repeatedly to turn off the screen display. Goto (for DVD / CD / Multimedia discs) This function allows you to play your favorite Title / Chapter / Time. Press the GOTO button to activate the on screen scroll-down menu for selecting. Input your Title / Chapter / Time number by 0-9 buttons or input the playback time. After editing, press the OK button to start. If the input is invalid, it will not function. Audio (for DVD / CD) Press the AUDIO button to toggle between different audio modes in sequence. For CD discs: Stereo / MonoL / MonoR / Mix Some discs may contain multi-languages which can be selected by pressing the AUDIO button. Program (for DVD) Program (valid only for DVD playback) The Program Playback option allows entering the order in which the chapters or tracks will be played, up to a maximum of 12. Press the PROGRAM button to display the Program Menu. According to the highlight, input your chapter/title number by 0-9 buttons and use the button to highlight the PLAY item on the screen and press the OK button to confirm. The chapters/title will play in the programmed order. During Program Playback, press the PROGRAM button, the programmed order and the contents will be displayed on the screen, and the Program Playback will be stopped. To clear the programmed order, use the buttons to highlight the Clear Program item, then press the OK button. To modify the programmed order, use the buttons to highlight the modifying item and enter the new chapter/title you want to program directly. GB-36 L26DVDB10_IB_final110210_running change3.indd 36

37 Using the DVD Language Setup Page Preparation In the DVD mode, press the DVD SETUP button on the remote control. Press the buttons to select the Language Setup menu, and the buttons to select the menu options. Press the DVD Setup button to exit the menu. In Setup mode, the disc playback function will not be available. OSD Language Set the OSD language to your language of choice. Connections Not all DVD discs support multiple OSD Languages. Subtitle Select the subtitle language. Not all DVD discs support multiple Subtitle Languages. Audio Set the audio language to your language of choice. Initial Setup Not all DVD discs support multiple Audio Languages. DVD Menu Select the Disc Menu language. Not all DVD discs support multiple DVD Menu. Using the DVD Video Setup Page In the DVD mode, press the DVD SETUP button on the remote control. Press the buttons to select the Video Setup menu, and the buttons to select the menu options. Press the DVD Setup button to exit the menu. In Setup mode, the disc playback function will not be available. Aspect Ratio Selects the aspect ratio. The image display ratio is related to the recorded disc format. Some discs cannot display images in the aspect ratio you choose. If you play a disc recorded in 4:3 format on a wide screen TV, black bars will appear on the left and right side of the screen. You must adjust the screen setting depending on the type of the television you have. TV System You can select from either PAL or NTSC. The DVD player setting should be matched to your TV set. Using the Features EPG (Electronic GB-37 L26DVDB10_IB_final110210_running change3.indd 37

38 Preparation Connections Initial Setup Using the Features EPG (Electronic Using the DVD Rating Setup Page In the DVD mode, press the DVD SETUP button on the remote control. Press the buttons to select the Rating Setup menu, and the buttons to select the menu options. Press the DVD Setup button to exit the menu. In Setup mode, the disc playback function will not be available. Parental Control Set the parental control feature of the player. Password is needed before setting Parental Control. Set the Password Input four digits(password), then press the OK button to confirm. Select to change the old password to a new password. (Factory default is 6666) To change the password, you need to: 1. Input the old password. 2. Input a new 4 digit password. 3. Confirm the password again. Using the MISC Setup Page In the DVD mode, press the DVD SETUP button on the remote control. Press the buttons to select the MISC Setup menu, and the buttons to select the menu options. Press the MISC Setup button to exit the menu. In Setup mode, the disc playback function will not be available. MISC Setup Select MISC in the setup menu, and display the submenu Use Default Settings Reset setup data to factory default value GB-38 L26DVDB10_IB_final110210_running change3.indd 38

39 Playing Multimedia Discs Preparation MP3/WMA/JPEG PLAYBACK When you insert a MP3/WMA/JPEG disc while in DVD mode the menu on the right will appear. Press the buttons to choose the root directory and then press the OK button to enter into the sub directory. Press the buttons to choose the desired track and then press the OK button or the button to enjoy the music or movie. If you want to return to the upper menu, press the buttons to choose the icon and press the OK button. Connections Button Filter Repeat Mode Normal Shuffle Edit Mode Browser View Program View Add to Program Clear Program Function Allows you to select the categories of files displayed in the browser list. To switch different repeat playing mode. Selects different playing mode as follows. Cancels shuffle mode. Enables shuffle mode. When playback reaches the end of the current chapter/track, playback jumps to a random chapter/track. As the end of each chapter/track is reached, another random chapter/track will be played until all tracks/chapters have been played or the Shuffle mode is cancelled by toggling to a different Mode Option. Enables programmed playback mode. When you select this mode, press the to the directory. Press the OK button to choose the desired track. Press the program track and press the OK button to start program playback. Display track directory. Displays program track. Press the Add to Program button to add the track to the program play directory. button to return button to display In the complete stop state (press the STOP button twice). First press Edit Mode button to enable the edit mode. Press the button to program track and press the OK button to cancel the desired track. Press the Clear Program button to delete the track of the program play directory. PICTURE CD PLAYBACK When you insert a PICTURE CD while in DVD mode the menu on the right will appear. Press the buttons to choose the root directory and then press the OK button to enter into the sub directory. Press the buttons to choose the desired picture and then press the OK button or the button to enjoy the picture. If you want to return to the upper menu, press the buttons to choose the icon and press the OK button. Image rotation In picture play state, press the CARD READER buttons to rotate the picture. 3 in 1 Card Reader You can insert three kinds of memory cards (MMC/SD/MS) to play MP3 music, movies or JPEG files. All playing functions are the same as playing a disc. USB You can insert a USB device or a MP3 Player with a USB Interface to play MP3 music or view JPEG files. All playing functions are the same as playing a disc. Press the DVD/USB/CARD button on the remote controller, and then press the Press the OK button to confirm. button to select DISC/USB/CARD. Not all USB/CARD devices are supported by this system. Take care when inserting USB/CARD devices so that you don't damage the unit. If you are playing a disc you will need to stop playing the disc and then insert your USB/CARD device. GB-39 Initial Setup Using the Features EPG (Electronic L26DVDB10_IB_final110210_running change3.indd 39