velocity standard 08 velocity features and benefits: dimensions:
|
|
- Lorena Bailey
- 5 years ago
- Views:
Transcription
1 velocity standard 08 V-S-08 Chic and robust - a highly-structural portable 10 x20 exhibit that emphasizes your identity and message seamlessly with a combinaton of fabric graphics, rigid accents and accessories Nimlok Display and Exhibit Solutions Worldwide For questions contact your local Nimlok distributor features and benefits: - Custom appearance - Easy to assemble - Combination of rigid and fabric graphics - aluminum construction: vertical extrusions 50mm x 100mm - Fully printed counter graphics dimensions: Hardware Assembled unit: (w) x (h) x 49.5 (d) approx mm(w) x 2524mm(h) x 1257mm(d) Table: 17 (w) x 40.5 (h) x 28.4 (d) approx. 433mm(w) x mm(h) x 722 mm(d) Counter: (w) x 40.5 (h) x (d) approx. 922mm(w) x 1029mm(h) x 384mm(d) Counter internal dimensions: 36.3 (w) x (h) x 13.8 (d) approx. 922mm(w) x 1000mm(h) x 351mm(d) Shipping Shipping dimensions - ships in 5 cases Each WMC12x6 case: 52 (l) x 30 (w) x 15 (h) mm(l) x 762mm(w) x 381mm(h) Approximate shipping weight (entire kit): 650 lbs / kgs additional information: Graphic materials: Dye-sublimated fabric & UV prints on 6mm sintra Table holds max weight 50 lbs / 22.8 kgs Counter holds max weight 100 lbs / 45.4 kgs - Kit includes one frame, one storage counter, one straight leg table, one graphic header, five fabric graphic panels, four roller graphic panels, seven 50 watt spotlights, three literature holders, one monitor bracket, and five WMC12x6 molded cases - Lifetime hardware warranty against manufacturer defects Graphic Panel A,B,C: Total visible area: w x h 299.9mm(w) x mm(h) Panel D,E,F: Total visible area: w x h 1179mm(w) x mm(h) Panel G & I: Total visible area: w x h 599.9mm(w) x mm(h) Panel H: Total visible area: w x h 876mm(w) x mm(h) Header: Total visible area: w x 12 h 1076mm(w) x 304.8mm(h) Refer to related graphic template for more information Monitor mount max weight: 50 lbs / 22.7 kgs Lights included: LV1 50 watt, low voltage spotlight, curved arm, silver finish, 19.5 from end to end Canopy can be upgraded to printed dye-sublimated graphic Tabletop colors: silver black mahogany natural velocity
2 Parts included Part label Qty Part code x20 PM4S A-A VE-07 x2 PM4S3-600-L-L VE-08 x2 PM4S3-300-L-L VE-09 x6 PH S-S VE-10 x1 PH2-900-S-S VE-99 x2 PS2 VE-11 x2 PH2-600-S-S VE-12 x3 PH2-300-S-S x10 PH2C-1 VE-16 x4 PH-600-S-S VE-17 x2 PH-300-S-S VE-31 x6 PH-351-S-S VE-40 x2 PM2S-1000 VE-44 x1 PM4S2-300-L-L V-LWS-CT-03 x1 V-LWS-CT-03 V-LWS-CT-02 x1 V-LWS-CT-02 SP VC-03 x1 C-CAB-02-DR Part label Qty Part code Graphic A x1 - Graphic B x1 - Panel C x1 - VE-53 panel D x1 PM4-RB4 VE-53 panel E x1 PM4-RB4 VE-53 panel F x1 PM4-RB4 Panel G x1 - Panel H x1 PM4-RB3 Panel I x1 - Header x1 - Counter infill x3 - Light x7 LV1-CLP-LIGHT Monitor mount x1 LM-LB Graphic clip x19 CTC8 Cable display x3 V-CK3A Standoff x2 CKSO Curved canopy x1 V-S-CAN-02 20'-0" [6096mm] Tool kit x1 V-TK-01 Step stool x1 STEP STOOL 10'-0" [3048mm] Steamer x1 FABRIC STEAMER-ES 1.
3 Step 1. Moving from left to right, connect uprights at base using the VE-12s, VE- 09s, VE-11s and VE-10 where designated in the diagram below. Connect using the attachment detail shown. Note that the VE-09s go into the first and second channel of the s. Take care to turn locks only half a turn. VE-09 VE-09 VE-10 VE-09 VE-11 VE-12 VE-09 VE-09 VE-11 VE-12 VE-09 VE-12 WITH S WITH S WITH S HORIZONTAL BY HORIZONTAL BY HORIZONTAL BY 2.
4 Step 2. Attach internal connectors to lower uprights using the attachment detail shown below. Slide upper s over the internal connectors to complete the vertical posts. POST W/ STOP 1-2- Tension Glides TOP BOTTOM STOP STOP 3.
5 Step 3. Connect the VE-08,VE-44 and VE-07 horizontals to the top of the completed uprights where designated in the diagram using the attachment detail below. VE-07 VE-07 VE-08 VE-08 VE-44 WITH S WITH S PH HORIZONTAL BY HORIZONTAL BY 4.
6 Step 4. Assure monitor mount is secured to the VE-99s using the wingnuts as seen in the attachment detail below. Attach both VE-99s, with monitor mount attached, to the designated uprights using attachment detail below. 5.
7 Step 5. Attach VE-53/VE-54, containing panels D, E, F and G, to the designated uprights as shown in attachment detail. Insert graphic clips into VE-09/VE-10 where designated and turn clockwise to tighten. Note that clips go in front VE-09s. Pull graphics down from VE-53/VE-54 and snap rods into clips. When removing, never pull on the graphic, always pull on the graphic rod. PANEL D VE-53 PANEL E VE-53 PANEL F VE-53 PANEL H VE-54 PH HORIZONTAL BY BOTTOM Dyesub Graphic Graphic Rod CLIP MIDDLE CHANNEL GRAPHIC CLIP The CLIP locations are represented by orange dots on the drawings. 6.
8 Step 6. Using the attachment detail show, push rubber gasket around edge of panels A, B, C, G and I into the designated channels as shown in diagram below. PANEL G GRAPHIC G PANEL I GRAPHIC I PANEL A GRAPHIC A PANEL B GRAPHIC B PANEL C GRAPHIC C TOP BOTTOM PULL TABS PULL TABS Fabric graphic is installed by pressing into TOP and BOTTOM channel. To pull the graphic out of the channels, use TABS on the back side. Fabric graphic is installed by pressing into TOP and BOTTOM channel. To pull the graphic out of the channels, use TABS on the back side. 7.
9 Step 7. To attach cable display, insert clips on end of cables into the front channel of both the VE-12 and VE-44 and twist gently to the right to tighten. To attach header, connect two standoffs to the front channel of designated uprights using detail below. Attach wings to the standoffs using detail below. HEADER STANDOFF CKSO CHANNEL CABLE DISPLAY TOP STANDOFF CKSO CABLE DISPLAY CABLE DISPLAY CABLE DISPLAY CHANNEL Twist in extrusion channel. Gently tight in place BOTTOM INSTALL CABLE DISPLAY IN THE FRONT CHANNEL CABLE DISPLAY BROCHURE OR GRAPHIC 2.5 MM HEX KEY STANDOFF Top STANDOFF DETAIL Graphic Channel of extrusion NT Toggle CABLE STANDOFF CABLE DISPLAY STANDOFF STANDOFF 2.5 MM HEX KEY STANDOFF Barrel Attach STANDOFF to brochure or sintra and gently tight in place. Then link Cables to extrusions top and bottom Screw the NT toggle into the base of the STANDOFF barrel and then insert the NT toggle into the channel of the extrusion and twist to tighten into place. Next, place the top of the STANDOFF through the hole in the graphic and then screw on the STANFOFF top to secure the graphic in place. 8.
10 Step 8. Assemble the canopy by connecting the pieces following the numbered labels. Clean the frame and place it on a clean surface. Carefully remove the graphic and place it around the bottom of the frame, slits on underside of graphic. Pull the cover carefully over the frame and close all zippers. When breaking system down, be sure to fold or roll the graphic neatly and place in bag. Screw supplied plates to the top of designated s as shown in detail below. Slide completed canopy onto tube secured to the plate. CURVED CANOPY CURVED CANOPY SET UP INSTRUCTIONS: 1. CONNECT BOTTOM AND TOP RAILS FOLLOWING THE LABELS 2. CONNECT SIDE RAILS 3. CLEAN THE FRAME AND PLACE THEM ON CLEAN PLACE 4. CAREFULLY REMOVE FABRIC COVER FROM BAGS 5. PLACE COVER AROUND THE BOTTOM OF THE FRAME 6. PULL COVER CAREFULLY UP TO THE TOP 7. CLOSE ALL ZIPPERS 1 8. ADJUST FABRIC AROUND THE FRAME Frame Assembly Assemble frame as shown 2 BREAK DOWN INSTRUCTIONS: REVERSE SET-UP STEPS TO BREAKDOWN FRAME FABRIC CARE INSTRUCTIONS: 1. UNZIP COVER ZIPPERS 2. CAREFULLY REMOVE FABRIC COVER 3. CLOSE ALL ZIPPERS 4. FOLD OR ROLL NEATLY 5. PLACE FABRIC IN COVER BAG PART LIST: PER UNIT 6 30MM DIA. TUBE SECTIONS 1 FABRIC COVER #8 SHEET METAL SCREW REQUIRED W/MINIMUIM OF 3/4" LENGTH TO SCREW THE PLATE TO THE 30MM TUBE #8 SCREW ZIPPER PLATE NOTCH BOTTOM FABRIC PANEL ON CENTER OF THE SPREADER TUBES FOR TUBE CONNECTION (1.25" DIA.). slits in graphic go on the underside of frame VERTICAL 9.
11 Step 9. Lock VE-31s at bottom of designated uprights using attachment detail below. Attach SP VC-03 counter door, VE-63 and remaining VE-31 to the secured VE-31s. SP VC-03 P90R-1000 VE-63 WITH S VE-31 VE-31 VE-31 HORIZONTAL BY 10.
12 Step 10. Slide front and side infills into the channels of the, SP VC-03 counter door, and VE-63 uprights. SIDE INFILL SIDE INFILL FRONT INFILL 11.
13 Step 11. Connect three upper VE-31s where designated in diagram below using the attachment detail shown. Set V-LSW-CT-02 counter top onto completed frame. VE-31 V-LWS-CT-02 VE-31 WITH S VE-31 HORIZONTAL BY 12.
14 Step 12. Connect VE-40s to the s on the frame using the VE-16s. See attachment detail below. Connect the VE-40s using the VE-17s. VE-17 VE-16 VE-16 VE-1 6 VE-1 6 VE-17 VE-40 VE-40 HORIZONTAL BY 13.
15 Step 13. Gently place V-LWS-CT-03 tabletop on completed frame. V-LWS-CT
16 Step 14. Slide seven lights onto clips and place into the middle channel of VE-53s and VE-44 as designated below using the attachment shown. LIGHT LIGHT LIGHT LIGHT LIGHT LIGHT LIGHT LIGHT W/ CLIP LV1 Light Light clip 1- Slide light clip onto the LIGHT. 2-Then slide the LIGHT into the channel at an angle and then gently lower down. 15.
17 check out these related products: velocity standard 01 velocity standard 05 velocity standard 02 velocity standard 06 velocity standard 03 velocity standard 07 Redesign of this exhibit without approval by Nimlok may result in dangerous and unsafe structures. Nimlok disclaims any responsibility for redesigned exhibits it does not approve in writing. Parts and components such as panels and extrusions are manufactured to metric sizing. We continue to improve and modify our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications. velocity standard 04 velocity standard 08
velocity standard 07 velocity features and benefits: dimensions: additional information:
velocity standard 07 V-S-07 Chic and robust - a highly-structural portable 10 x10 exhibit that emphasizes your identity and message seamlessly with a combinaton of fabric graphics, rigid accents and accessories.
More informationFormulate Designer Series 20 Backwall - Kit 07
Formulate Designer Series 20 Backwall - Kit 07 FMLT-DS-20-07 Formulate TM Designer Series 20ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame
More informationModulate Magnetic Kit 10-07
Modulate Magnetic Kit 10-07 MOD-10-07-M MOD-10-07-M-OCE Modulate Fabric Banner kits feature unique angles and shapes, are portable and now are even easier to configure to achieve your dream space! Modulate
More informationModulate Magnetic Kit 10-01
Modulate Magnetic Kit 10-01 MOD-10-01-M MOD-10-01-M-OCE Modulate Fabric Banner kits feature unique angles and shapes, are portable and now are even easier to configure to achieve your dream space! Modulate
More informationTabletop Kit 03. features and benefits: dimensions: additional information:
Tabletop Kit 03 TK-TTK-03 Stylish & simple, the Formulate tension fabric tabletop display is lightweight & highly portable. The sophisticated Formulate tension fabric banner includes literature attachments
More informationFormulate 20 Straight
Formulate 20 Straight FMLT-WS20-30MM-01 Formulate 20 Master Straight backwall incorporates a sleek, straight aluminum frame with a zipper pillowcase fabric graphic to create a sharp, bold backwall that
More informationFormulate Designer Series 10 Backwall - Kit 05
Formulate Designer Series 10 Backwall - Kit 05 FMLT-DS-10-05 Formulate TM Designer Series 10ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame
More informationFormulate Designer Series 30 Backwall - Kit 05
Formulate Designer Series 30 Backwall - Kit 05 Formulate Designer Series 30ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame features snap-buttons
More informationFormulate Designer Series 30 Backwall - Kit 05
Formulate Designer Series 30 Backwall - Kit 05 FMLT-DS-30-05 Formulate TM Designer Series 30ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame
More informationEmbrace 2.5 Backlit Push-Fit Tension Fabric Display
Embrace 2.5 Backlit Push-Fit Tension Fabric Display EMB-2-BL-1X1-S The Embrace 2.5ft tabletop (1 Quad x 1 Quad) backlit push-fit fabric display is a sleek illuminated collapsible display. The Backlit Embrace
More informationCoyote popup features
Coyote popup features The Coyote popup display system combines strength, reliablility, and style in a lightweight and easy to use system. It is fully magnetic, making it simple to assemble and disassemble,
More informationCoyote popup display set up instructions
Coyote popup display set up instructions Frame 1 2 3 Prepare frame for assembly by locating the purple hooks on top of the frame. Stretch frame to size, snapping magnetic locking arms together. Attach
More informationOrder #XXXXX - ECO x10 Inline Display. Setups. 10 Plan View
Order #XXXXX - ECO-054-0 x0 Inline Display Setups 0 0 Plan View 7A General Setup Instructions The setup instructions are created specifically for your configuration. Setup instructions are laid out sequentially
More informationLUMIÈRE CONFIGURATION - D LUMIÈRE LIGHT WALL PRODUCT CODE: LLW20D
On frame On graphic Shown with optional feet PRODUCT DESCRIPTION Illuminate your message with the Lumiere Light Wall! Lumiere ladder lights make backlit graphics pop on this innovative combo display of
More informationTECHNICAL INFORMATION
OCTALUMINA 120: PARTS LIST AND TECHNICAL INFORMATION HIGH POWER LEDS INNER CORNER LABELED FRAME MOUNTED POWER SUPPLY UNIT EASY PLUG-IN CONNECTION BRACING TECHNIQUE CABLE OUTLET AT THE BOTTOM SYSTEM PACKAGING
More informationCable System Installation Guide
Overview Cable System Installation Guide 5/19/2008 Our recommended approach for the installation of your Circle Graphics Cable Systems on the panels in your market is to install the fixed hardware (namely
More informationMIRAGE. Skyline Mirage Set-Up Instructions Skyline Exhibits
MIRAGE Skyline Mirage Set-Up Instructions www.skyline.com Table of Contents Mirage Pop-up is available in many sizes from 32 tall tabletops to 92 tall backwalls. The following set-up and repacking instructions
More informationREAD ME FIRST. Touchstone TV Lift
Whisper Lift II PRO 2 READ ME FIRST 1. After completing the unpacking and uncrating of the cabinet, you will find the Owner s Manual, TV, installation hardware, and the wireless remote all together and
More informationAssembling and Mounting the Presentation Display, Speakers, Speaker Screens, and Table Door
CHAPTER 8 Assembling and Mounting the Presentation Display, Speakers, Speaker Screens, and Table Door July 13, 2012, This document provides you with the procedures you perform to assemble and mount the
More informationRALLY SIGNS HAND HELD DOUBLE-SIDED SIGNS
MADE IN USA FREE ART NO CHARGE FOR FREE SET UPS OVERRUNS GUARANTEED FREE SCREENS INVENTORY MADE IN USA #198-12 ¼ " x 19 ¼ " Stick-Mounted Sign Hand Held Signs for Every Event or Function Multiple and Durable
More informationCheck what you have received against the component checklist and hardware above.
SSS SSPW SSW SSPB SSB Component Checklist Installation Instructions SYSTEMA Systema Monitor Spring Arm HARDWARE Display Mounting Spacers (x4) 3/4mm Allen Keys Display Mounting Screws M4 x 14mm (x1) Silver
More informationFOSC 450 C6 and D6 Closures
FOSC 450 C6 and D6 Closures I N S T A L L A T I O N I N S T R U C T I O N Fiber Optic Splice Closure 1. General Product Information The FOSC 450 C6 and D6 fiber optic splice closures use compressed gel
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PARTS REQUIRED Parts in the box Single monitor Dual monitor M2 M8 M/Flex + (package contents will depend on configuration ordered) Tools required for installation 6.0 mm Hex Key
More information24-Fiber LANLINXS (Model # ) 48-Fiber LANLINXS (Model # ) User Manual
24-Fiber LANLINXS (Model # 055-8632-5000) 48-Fiber LANLINXS (Model # 055-8832-5000) User Manual 24-Fiber LANLINXS (Model # 055-8632-5000) 48-Fiber LANLINXS (Model # 055-8832-5000) User Manual, Part Number
More informationDesk Mount Articulating Dual Monitor Arm with Cable Management & Height Adjust
Desk Mount Articulating Dual Monitor Arm with Cable Management & Height Adjust ARMDUAL *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com
More informationCheck what you have received against the component checklist and hardware above.
SA46S SA46W SA46B SA46PB Component Checklist Installation Instructions SYSTEMA Systema Monitor Arm 460mm HARDWARE Display Mounting Spacers (x4) Display Mounting Screws Arm Assembly VESA monitor head M4
More informationASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 75 OHM AND 75 OHM HD COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT
More informationFOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N
FOSC-600 C and D I N S T A L L A T I O N I N S T R U C T I O N In-line and butt version Cold applied re-usable fiber optic closure Contents 1 Introduction 1.1 Product description 1.2 Capacity 2 General
More informationIP-LINX Fiber :: X-XXXX
Fiber :: 055-797X-XXXX User Manual Telect, Inc. All rights reserved. 146653-A0 Table of Contents Chapter 1: Introduction...3 1.1 Tools Required...3 1.2 Additional Parts...3 1.3 Assemblies...3 Chapter 2:
More informationOFDC-B8-72. Outdoor fiber distribution closure. 6 Closing. Content 1 Introduction. 7 Re-entry. 2 Kit content. 3 Closure preparation
OFDC-B8-72 I N S T A L L A T I O N I N S T R U C T I O N Outdoor fiber distribution closure Content 1 Introduction 2 Kit content 3 Closure preparation 4 Cable preparation 4.1 Feeder cable 4.2 Drop cable
More informationDesk Mount Articulating Tablet Arm with Locking Security Clamp
Desk Mount Articulating Tablet Arm with Locking Security Clamp ARMTBLTI DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT:
More informationIP-LINX. Installation Guide
Installation Guide Installation Guide, 146653-4 Copyright 2017, Telect, Inc. All Rights Reserved Telect and Connecting the Future are registered trademarks of Telect, Inc. 22425 East Appleway Ave. # 11
More informationlumenalpha spot Specification Sheet
Client Project name Order# Type Qty FEATURES AND BENEFITS Physical Housing material: extruded aluminum Available in or 8 sections Finish: black or white Ceiling mounting: surface or recessed Wall mounting:
More informationSetup Guide. Read me BefoRe unpacking!
Setup Guide Read me BefoRe unpacking! Package Contents In The Replicator package The Replicator SD card (in The Replicator SD card slot) In the Accessory Box found within The Replicator frame Single or
More informationOperating Manual. Automated Gear. Apollo Design Technology, Inc Fourier Drive Fort Wayne, IN USA
Operating Manual Automated Gear Apollo Design Technology, Inc. 4130 Fourier Drive Fort Wayne, IN 46818 USA PH: +01(260)497-9191 FX: +01(260)497-9192 www.apollodesign.net 11-25-09 5-6 POWERING UP THE RIGHT
More informationInstallation Guide OvalSox TM Cable
Installation Guide OvalSox TM Cable Thank you for selecting a DuctSox System. This guide will be helpful for the installation of an OvalSox Cable System. Sections of fabric will be labeled, assembled,
More informationOWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: LPDA 200 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DRAWING - WARRANTY AntennaTek, Inc. 425 S. Bowen, #4 Longmont,
More informationRT AUDIO RETRACTABLE CABLE
AUDIO RETRACTABLE CABLE Welcome! Thank you for purchasing the MINI-ME RT300-134 audio Cable Retractor. We know you will find it easy to install, easy to use and easy to maintain. Our goal is to provide
More informationM2 Antenna Systems, Inc. Model No: 23CM35
M2 Antenna Systems, Inc. Model No: 23CM35 SPECIFICATIONS: Model... 23CM35 Frequency Range... 1250 To 1300 MHz *Gain... 20.94 dbi Front to back... 25 db Typical Beamwidth... E=17 H=18 Feed type... Folded
More informationSafety Rules Parts Check Lists and Photos Cable Diagrams for Various Crane Configurations Step by Step Instructions Tips for Packaging and Storage
EZ CRANE USER MANUAL INCLUDED INSIDE Safety Rules Parts Check Lists and Photos Cable Diagrams for Various Crane Configurations Step by Step Instructions Tips for Packaging and Storage WATCH THE INSTRUCTIONAL
More informationSimple and highly effective technology to communicate your brand s distinctive character
. . . Advantages 4 Simple and highly effective technology to communicate your brand s distinctive character COST EFFECTIVE No need to print graphics, you can change your message every day! No media player
More information3M Better Buried Compound Compression Closure System
3M Better Buried Compound Compression Closure System Instructions March 2016 78-0015-2948-2-A Contents: 1.0 General...3 2.0 Kit Contents...3 3.0 Closure Selection Guide...4 4.0 LHS End Cap Installation...5
More informationAutomatic Connector MHV Connectors MHV Introduction MHV series connectors Contents Polarized mating interfaces Anti-Rock mating interfaces
Automatic s 2004 Automatic. All rights reserved. pdf 1.0 3-18-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable Plugs...................
More informationMotor Operated Solar Shade with Valance Installation and Care Instructions Complete Video Instructions Available Online at
* Motor Operated Solar Shade with Valance Installation and Care Instructions Complete Video Instructions Available Online at www.keystonefabrics.com Step 1: Identify the parts of your shade (parts shown
More informationThe Two Assemblies. Standard Assembly For signs up to 11" wide. Pull flexible lens directly outward with Sucton Cup Tool for lens removal
System Overview The Two Assemblies The Arris system is comprised of two unique assemblies, each designed to provide maximum cost effectiveness and design flexibility for specific types of signs. With both
More informationSeries 2500 Vibration Isolation Table
Series 2500 Vibration Isolation Table October 2008 1741 W. University Drive, Ste. 146 1741 W. University Drive, Ste. 146 Now, even better! The Series 2500 Vibration Isolation Table has been very well received.
More informationMP Maker Pro Mk.1. Quick Start Guide
MP Maker Pro Mk.1 P/N 33013 Quick Start Guide ONLINE SUPPORT Monoprice is pleased to provide free online support. For order related issues, contact the Customer Service department through the Live Chat
More informationFlex Tube Pixel. User guide
01 Flex Tube Pixel User guide CONTENTS INTRODUCTION...2 Welcome 2 Safety 2 Large scale installations 3 INSTALLATION...5 Flex Tube Pixel orientation 5 Bending a Flex Tube Pixel 6 Cutting a Flex Tube Pixel
More informationWebsite: Tel: ADDRESS: 6475 Las Positas Rd. Livermore, CA Item No. E5B/E5S Installation Guide
Website: www.flexispot.com Tel: -855-4-808 ADDRESS: 6475 Las Positas Rd. Livermore, CA 9455 Item No. E5B/E5S Installation Guide Specifications Step Column 3 Max. Weight Capacity 0 Ibs (00 kg) Speed 38mm/s
More informationCaution. Hanging the Screen:
Installation Instructions for Laminar and Laminar XL Projection Screens Caution 1. Read Instructions through completely before proceeding; keep them for future reference. Follow these instructions carefully.
More informationM-8400RVe Printer. Parts List. Page 1-1. P/N Rev.B
M-8400RVe Printer Parts List Page 1-1 P/N 9001085 Rev.B Table of Contents M-8400RVe Parts List Page Frame Assembly...3 Head Assembly... 8 Ribbon Assembly... 11 Feed Roller Assembly... 16 Base Cover Assembly...
More information3M Motor Lead Inline Splice 5331, 5332, 5333 & 5334
3M Motor Lead Inline Splice 5331, 5332, 5333 & 5334 for 5/8 kv Non-Shielded and Shielded Cables (Ribbon, Wire and UniShield Cables) Instructions Cable Size Range: Feeder: #8 AWG 500 kcmil Motor Lead: #10
More information3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx Preparing drop cable with micro-tubes
FIST-GCOG2-Dx24 I N S T A L L A T I O N I N S T R U C T I O N FTTH closure for micro-tubes and micro-cables Content 1 Introduction 2 Kit content 3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx24
More informationControlTrac PRODUCT GUIDE tbcconsoles.com
ControlTrac PRODUCT GUIDE tbcconsoles.com TABLE OF CONTENTS CTL SERIES OVERVIEW... PAGE 3 FEATURES... PAGE 4 PRE-CONFIGURED CONSOLES STRAIGHT... PAGE 5 PRE-CONFIGURED CONSOLES ANGULAR... PAGE 6 E SERIES
More informationUSER MANUAL. Table of Contents. 1.0 Introduction Specifications Package Contents Panel Descriptions...3
USER MANUAL Table of Contents 1.0 Introduction...2 2.0 Specifications.. 2 3.0 Package Contents...3 4.0 Panel Descriptions...3 5.0 Connection and Operation.....4 DEAR CUSTOMER Thank you for purchasing this
More information3M Distribution Box (DDB)
3M Distribution Box (DDB) Merged Copper and Fiber Pole/Post Mount Enclosure Installation Instructions November 2015 78-0015-2736-1-A 2 November 2015 78-0015-2736-1-A Contents 1.0 General 2.0 Enclosure
More informationRAIL BULL TRACK WELDING CARRIAGE WITH OSCILLATOR
RAIL BULL TRACK WELDING CARRIAGE WITH OSCILLATOR The Rail Bull is a track welding carriage designed to produce butt and fillet welds with or without oscillation. The carriage can work in PA (flat), PB
More informationDistributed Design Series
D10SUB 10-INCH FEATURES Powerful, high-impact bass response Internal passive low-pass crossover Spring loaded Drop-Stop installation assistant tabs support the back can on the included rails and C-ring
More informationNewScope-7A Operating Manual
2016 SIMMCONN Labs, LLC All rights reserved NewScope-7A Operating Manual Preliminary May 13, 2017 NewScope-7A Operating Manual 1 Introduction... 3 1.1 Kit compatibility... 3 2 Initial Inspection... 3 3
More informationOptical Distribution Box 300 Installation Guide. Version : R0.0
Optical Distribution Box 300 Installation Guide Document No. : OD16-546-L-01 Version : R0.0 Date: 21-Mar-2018 IMPORTANT INSTRUCTIONS When using fiber optic equipment, basic precautions should always be
More informationRemote Tuner Options for the DXE-MBVE-1 Vertical Antenna
Remote Tuner Options for the DXE-MBVE-1 Vertical Antenna DXE-MBVE-1UGBRT3 for the MFJ-993BRT 300 Watt Remote Tuner DXE-MBVE-1UGBRT4 for the MFJ-994BRT 600 Watt Remote Tuner DXE-MBVE-1UGRT8 for the MFJ-998RT
More informationOCT 15 Rev B
AMP+ HVA280-3pxm XE High-Voltage Plug Connector with 1-Stage Latching Application Specification 114-32125 15 OCT 15 Rev B NOTE All numerical values are in metric units [with U.S. customary units in brackets].
More informationINSTRUCTION MANUAL. Model V-4R Collinear Gain Vertical for MHz. General SPECIFICATIONS
308 Industrial Park Road Starkville, MS 39759 USA, Ph: (662) 323-9538 FAX: (662) 323-651 Model V-4R Collinear Gain Vertical for 420-450 MHz INSTRUCTION MANUAL General The new Hy-Gain V-4R 70cm antenna
More informationKRAMER ELECTRONICS LTD. USER MANUAL MODEL: RTBUS-12 Round Table Connection Bus. P/N: Rev 1
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: RTBUS-12 Round Table Connection Bus P/N: 2900-300099 Rev 1 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 3 Overview 3 3.1
More informationM8400RV Base Cover Assembly Item # Part Number Part Description Qty
Base Cover Assembly Item # Part Number Part Description Qty 1 PH1741200 Base frame 1 2 PT6680100 Rubber foot 4 3 PA3741000 Frame bracket 1 4 MD4301022 Pan head screw 3 5 PA3742500 Frame bracket 1 6 MD4301022
More informationChannel Cable Tray - Accessories
Splice Plate The Splice Plate has the standard 4-hole pattern for all cable channel. Provided with straight sections and fittings. 9(*)-1043 3 (76) 9(*)-1044 4 (101) 9(*)-1044-6 6 (152) Horizontal Adjustable
More informationK Service Source. Apple High-Res Monochrome Monitor
K Service Source Apple High-Res Monochrome Monitor K Service Source Specifications Apple High-Resolution Monochrome Monitor Specifications Characteristics - 1 Characteristics Picture Tube 12-in. diagonal
More informationVGA Extender LR EXT-VGA-141LR. User s Manual
VGA Extender LR EXT-VGA-141LR User s Manual Congratulations on your purchase of the VGA Extender LR. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer
More informationSECTION 4 TABLE OF CONTENTS
Contents Introduction LC, SC and ST Series...4-2 Markets and Applications...4-2 International Standard Documents Compliance...4-2 LC Series Features and Benefits...4-3 LC Standard... 4-4 to 4-5 LC for
More informationWID-DL74 WID-DL74 BLP WID. Designed for. Installation guide for workitdesk interactive table for. BrightLink Pro
WID-DL74 WID-DL74 BLP WID Designed for BrightLink Pro Installation guide for workitdesk interactive table BrightLink Pro for Mounting the table unit 1 Unpack boxes 1 of 4 (Mobile base) and 2 of 4 (Motorized
More informationPower Rack with Lat Pull
Power Rack with Lat Pull BD-7 Owner's Manual VA0900 D SAFETY & PRECAUTIONS IMPORTANT: READ ALL PRECAUTIONS CAREFULLY BEFORE USING THIS PRODUCT. RETAIN OWNER'S MANUAL FOR FUTURE REFERENCE. Note: This item
More informationSCREEN WINCH SYSTEM INSTALLATION MANUAL FOR SCREENS FROM 300 cm. UP TO 450 cm. of width
SCREEN WINCH SYSTEM INSTALLATION MANUAL FOR SCREENS FROM 300 cm. UP TO 450 cm. of width Before installing the screen winch system, please read the following instructions carefully: The screen winch system
More informationNEPTUNE PROJECTION SCREEN PRO-LINE MANUAL SCREEN NEPTUNE PRO-LINE MNAUAL SCREEN SPRING ROLL LOCKING SYSTEM DEFINITE ASPECT UNIQUE APPEARANCE DURABLE
NEPTUNE PRO-LINE MANUAL SCREEN QS Neptune pro-line manual screen combines comfortable viewing and simplicity in use. It satisfies the most exacting viewers with clear black border for definite aspect.
More informationTripod Portable Projection Screen Elite Tripod Series
Tripod Portable Projection Screen Elite Tripod Series USER S GUIDE Rev. 060809-JA www.elitescreens.com info@elitescreens.com Tripod Screen Parts Identification Support beam Top Hook, Keystone Eliminator
More information3M Better Buried Closures
3M Better Buried Closures Instructions March 2016 78-0015-2945-8-A Contents: 1.0 General... 3 2.0 Kit Contents... 3 3.0 Closure Selection Guide... 4 4.0 LHS End Cap Installation... 5 5.0 Cable Preparations...
More informationPelican PL-957. Adding additional Tos Link (Digital Optical) inputs, and / or IR Remote
Pelican PL-957 Adding additional Tos Link (Digital Optical) inputs, and / or IR Remote Table of Contents: Background;... 2 Section 1: Adding TosLink receivers... 3 Section 2: Adding Remote Capability...
More informationINVISILED ACCESSORIES
Indoor mounting accessories v" 5 feet LED-T-CH Aluminum Channel Includes a diffuser, two end caps, and five screws a" 2 pcs LED-T-CH-EC End caps for Aluminum Channel 1" 5 feet LED-T-CH1 Deep Aluminum Channel
More informationKramer Electronics, Ltd. USER MANUAL. Model: VM Video Component Distributor
Kramer Electronics, Ltd. USER MANUAL Model: VM-1045 Video Component Distributor Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 1 3 Overview 3 4 Your VM-1045 Video Component Distributor
More informationOWNER'S MANUAL SIGNAL COMMANDER
OWNER'S MANUAL SIGNAL COMMANDER THIS MANUAL CONTAINS INSTRUCTIONS FOR: LPDA 100 - INSTALLATION - OPERATION - TROUBLESHOOTING - EXPLODED PARTS DIAGRAM - WARRANTY AntennaTek, Inc. 425 S. Bowen, # 4 Longmont,
More informationINSTRUCTION AND MAINTENANCE VIDEO MOTORE PROJECTION SCREEN
INSTRUCTION AND MAINTENANCE VIDEO MOTORE PROJECTION SCREEN 1.1 TECHNICAL DATA PRODUCT DESCRIPTION Screens made with the following projection fabrics: SOFT WHITE, MATT WHITE SOFT, SOFT WHITE TRANSOUND,
More informationPowerBook G4 Aluminum 12" GHz LCD panel upgrade
PowerBook G4 Aluminum 12" 1-1.5 GHz LCD panel upgrade Upgrade a 1400x1050 LCD panel. Written By: martin ifixit CC BY-NC-SA www.ifixit.com Page 1 of 18 INTRODUCTION The original LCD 1024x768 resolution
More informationOperation and Maintenance Guide Electric Needle Scalers
Operation and Maintenance Guide Electric Needle Scalers Models Covered Model Number ENS100V ENS200V Electric Needle Scaler, 110V-1ph Electric Needle Scaler, 220V-1ph Description IMPA Number 59 12 01 59
More informationVT VGA TFT NEMA 4/12 Flat Panel Monitor. User s Guide
VT1040 10.4 VGA TFT NEMA 4/12 Flat Panel Monitor User s Guide 301040(A) (was document no. 920A0001 version 1.1), revised 01/98 Viewtronix Viewtronix reserves the right to make changes in specifications
More informationBionic Elephant Trunk. Assembly Instructions
Bionic Elephant Trunk Assembly Instructions Equipment and Supplies Required items from the Bionics Kit and/or Materials Pack: 1. Tail fin (small) assembled 2 see Start Here for tail fin assembly instructions
More information3M Locator Plate N
M Locator Plate 44-107N Instructions for the assembly of.100 x.100 preassembled socket connectors 1.0 General The M Locator Plate 44-107N is designed to aid in the assembly of the preassembled socket connector
More informationEXPERIENCE INCREASE THE
CATALOGUE 2018-2019 INCREASE THE EXPERIENCE Have you ever felt like you don t just wanna watch, but to actually be there? experience the car chase from the passenger seat or sit in the crowd at the GAME
More informationTechnical Information Bulletin
June 4, 2001 #TIB0003 Units Affected: Model Serial Numbers Model Serial Numbers SVT-2PRO T2PDxxxxxxxxx SVTAV AXVDxxxxxxxxx ATLDxxxxxxxxx BJIDMAxxxxxxx SVT-2PROJ T2PJxxxxxxxxx SVTAVJ BAHJxxxxxxxxx ATLJxxxxxxxxx
More informationInstructions. Cable with Armor F CAUTION. October Rev A
3M Single Conductor Accessory Breakout Kits (BOK's) for use with 3M Cable Accessories (Terminations, T-Bodies and Push-On Elbows) For Use With Single Conductor Accessories On Three-Core Conductor Cables
More informationA449-6S 70 CENTIMETER FM YAGI ANTENNA MHz
ASSEMBLY AND INSTALLATION A449-6S 70 CENTIMETER FM YAGI ANTENNA 440-450 MHz COMMUNICATIONS ANTENNAS 951425 (7/93) WARNING THIS ANTENNA IS AN ELECTRICAL CONDUCTOR. CONTACT WITH POWER LINES CAN RESULT IN
More informationManual placement system MPL3100. for BGA, CSP and Fine-Pitch components
Manual placement system MPL3100 for BGA, CSP and Fine-Pitch components Part No: MPL3100BA1.0e Issue Date: 02/2001 You have opted for an ESSEMTEC MPL3100 pick and place system. We thank you for this decision
More informationCrimp & Cleave Termination Instructions for SEL ST Connectors
Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for SEL ST Connectors For Use With: ST Termination Kit (SEL, Part Number BT05402-01) 200 µm HCS Fiber-Optic Cable ST Crimp &
More informationFELIX3.1 assemblymanual
FELIX3.1 assemblymanual Assemblymanualfor: FELIX3.1Single FELIX3.1Dual copyrightinformation Thisdocumentcontainsproprietaryinformationthatisprotectedbycopyright. nopartofthisdocumentmaybephotocopied,reproduced,ortranslatedtoanotherlanguagewithoutthepriorwritenconsentoffelixroboticsbv.
More informationRoof-mounted Blue e+ cooling unit Integration solution VX25
Roof-mounted Blue e+ cooling unit Integration solution VX25 Ease of use Intuitive operation via touch display Integration solution VX25 and Blue e+ Cooling unit with 1.3 kw and Blue e+ technology with
More informationVGA Extender LR EXT-VGA-141LR. User s Manual
VGA Extender LR EXT-VGA-141LR User s Manual ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru
More informationSCREEN WINCH SYSTEM INSTALLATION MANUAL FOR SCREENS UP TO 300 cm. of width
SCREEN WINCH SYSTEM INSTALLATION MANUAL FOR SCREENS UP TO 300 cm. of width Before installing the screen winch system, please read the following instructions carefully: The screen winch system must be used
More informationSPECIFICATION. Spec No : VSS-1402-CS603B
SPECIFICATION Spec No : VSS-1402-CS603B 1. INTRODUCTION 1.1. General This specification covers the design requirements and characteristics required of fiber optic splice closures to be used on fiber optic
More informationK Service Source. Apple High-Res Monochrome Monitor
K Service Source Apple High-Res Monochrome Monitor K Service Source Specifications Apple High-Resolution Monochrome Monitor Specifications Characteristics - 1 Characteristics Picture Tube 12-in. diagonal
More informationUltraTwist. Product Description. Instruction Guide
UltraTwist Instruction Guide English 7EN111103-01 2009-07-06 Applies to the following models: UltraTwist Slim Prod. No. 3126045 UltraTwist Wide Prod. No. 3126047 UltraTwist Slim UltraTwist Wide Product
More informationT5-RM HD MITS. User Manual. 3-Dmed LEARNING THROUGH SIMULATION
T5-RM HD MITS User Manual 3-Dmed LEARNING THROUGH SIMULATION T5-RM HD Minimally Invasive Training System Thank you for purchasing the T5-RM HD MITS from 3-Dmed Each has been fully tested prior to shipment
More informationRibbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
More information