Applications protects low noise amplifiers and other devices from ESD or input power damage military, hi-rel applications

Transcription

1 +12 to +3dBm Limiter 5Ω Broadband 3 to 3 MHz Maximum Ratings Operating Temperature -55 C to 1 C Storage Temperature -55 C to 1 C RF Power 2W Permanent damage may occur if any of these limits are exceeded. Coaxial Connections* INPUT OUTPUT DELTA OUTPUT (db/db) Across Flats in some models DELTA OUTPUT/DELTA 1dB INPUT. 12 to 2 dbm - 2 to 25 dbm 25 to 3 dbm SMA FEMALE Outline Drawing B D E wt grams SMA MALE *Suggested Connections. For reverse connections, consult Mini-Circuits. Outline Dimensions ( inch mm ) Features wideband, 3 to 3 MHz low insertion loss 3 db typ. fast recovery time, 1nsec typ. excellent 1.5:1 typ. low leakage power, 11.5 dbm typ. Applications protects low noise amplifiers and other devices from ESD or input power damage military, hi-rel applications POWER OUTPUT (dbm) POWER OUTPUT vs. POWER INPUT at 3 MHz at 16 MHz at 3 MHz POWER INPUT (dbm) INPUT IN LINEAR RANGE Electrical Specifications Typical Performance Data CASE STYLE: FF74 Connectors Model SMA VLM-33-S+ Parameter Condition Min. Typ. Max. Units Frequency Range 3 3 MHz Insertion Loss in Linear Range <+5 dbm 3.7 db <+5 dbm :1 Power Limiting Range dbm Output Power In limiting range dbm Recovery Time 1 watt pulse 5 µsec pw 1kHz duty cycle recovery to within 9% of final value. POWER OUTPUT vs. FREQUENCY Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. REV. D C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled M15117 to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at Mini-Circuits ED-13537/4 DJ/CP/AM P.O. Box 35166, Brooklyn, NY (718) sales@minicircuits.com Page 1 of 1 POWER OUTPUT (dbm) nsec Response Time -3 to +3 dbm input 5 µsec, BW 1 khz duty cycle 2 nsec Limiting Output/1dB Freq. (MHz) I. Loss in Linear Range (db) in Linear Range (:1) Power Range (dbm) 12 to 2 2 to to 3 +12dBm Power Output (dbm) +2dBm +25 dbm +3dBm +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications +12 to +2dBm Power =+12 dbm Power =+2 dbm Power =+25 dbm Power =+3 dbm OUTPUT IN LINEAR RANGE Output 1dB +2 to +25 dbm db/db +25 to +3 dbm

2 LIMITER Typical Performance Data LOW INPUT POWER FREQUENCY POWER OUTPUT (dbm) DELTA OUTPUT/1dB DELTA INPUT (db/db) INSERTION LOSS (MHz) (db) INPUT OUTPUT +12 dbm +2 dbm +25 dbm +3 dbm +12 to +2 dbm +2 to +25 dbm +25 to +3 dbm (:1) INPUT INPUT INPUT INPUT INPUT INPUT INPUT Rev. X3 2/9/211 Page 1 of 2

3 LIMITER Typical Performance Data POWER INPUT POWER OUTPUT POWER INPUT POWER OUTPUT POWER INPUT POWER MHz (dbm) (dbm) (dbm) Rev. X3 2/9/211 Page 2 of 2

4 LIMITER Typical Performance Curves Insertion Loss (db) Insertion Loss Power Output (dbm) Power Output vs MHz Power (dbm) 2 Power Output vs Frequency 1.4 Delta Output / Delta 1dB Power Output (dbm) Power =+12 (dbm) Power =+2 (dbm) Power =+25 (dbm) Power =+3 (dbm) Delta Output/Delta 1 db (db/db) to +2 (dbm) to +25 (dbm) to +3 (dbm) INPUT OUTPUT INPUT (:1) OUTPUT (:1) Rev. X3 2/9/211 Page 1 of 1

5 Case Style Outline Dimensions FF FF74 FF886 FF887 FF888 FF969 FF1118 FF1145 CASE #. A B C D E WT GRAMS FF74 FF886 FF887 FF888 FF969 FF1118 FF (1.41).62 (15.75).62 (15.75).41 (1.41).555 (14.1).41 (1.41).41 (1.41) Dimensions are in inches (mm). Tolerances: 2Pl. ±.3; 3Pl. ±.15 Notes: 1. Case material: Stainless steel. 2. Case finish: Passivation for FF888, gold plate on all remaining case style. 3. Round Flange may have.312 Across Flats in some models (36.32) 1.9 (48.26) 2.24 (56.9) 1.18 (29.97) 1.75 (44.45) 2.67 (67.82) 1.91 (48.51).312 (7.92) FF Rev.: AP (1/9/18) M File: 98-FF.docx Sheet 7 of 2 This document and its contents are the property of Mini-Circuits.

6 Mini-Circuits Environmental Specifications ENV28 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -55 to 1 C Ambient Environment Individual Model Data Sheet Storage Temperature -55 to 1 C Ambient Environment Individual Model Data Sheet Barometric Pressure 1, Feet MIL-STD-22, Method 15, Condition D Humidity 9% RH, 65 C Units may require bake-out after humidity to restore full performance. MIL-STD-22, Method 13 Thermal Shock -65 to 125 C, 5 cycles MIL-STD-22, Method 17, Condition B Vibration (High Frequency) 2g peak, 1-2 Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-22, Method 24, Condition D Mechanical Shock 1g, 6ms sawtooth, 3 shocks each direction 3 axes (total 18) MIL-STD-22, Method 213, Condition I ENV28 Rev: B 9/26/13 M File: ENV28.pdf This document and its contents are the property of Mini-Circuits. Page: 1