Heating films. Articelnumber build:

Transcription

1 Frenzelit GmbH 2018

2 Heating films The hicotherm 36 V heating film can be installed inconspicuously into a wall, ceiling and floor and brings a new feel-good experience to your home. Number Name Description xxx yy hicotherm V 60 W/m² - max. length 11 m film width 0.6 m xxx yy hicotherm V 110 W/m² - max. length 6 m film width 0.6 m xxx yy hicotherm CFI 115 W/m² - max. length 5.8 m film width 0.6 m xxx yy hicotherm V 220 W/m² - max. length 3 m film width 0.6 m xxx yy hicotherm L V 290 W/m² - max. length 8 m film width 0.17 m Fleece-laminated xxx yy hicotherm L V 145 W/m² - max. length 15 m film width 0.17 m V = CFI = L = fleece laminated PET-laminated (insulated) embrasure (width 17 cm) Articelnumber build: xxx = length in decimeter = for example: 1 m = 010 // 2.2 m = 022 yy = type of connection = 00 = 2.5 mm² crimp without cable 03 = 6.0 mm² crimp without cable 01 = 2.5 mm² crimp with 15 cm cable 04 = 6.0 mm² crimp with 15 cm cable 02 = 2.5 mm² crimp with 250 cm cable PET-laminated 2

3 Power units 36 V All power units are fused primary and secondary. Can be easily connected via wireless or wired temperature controller To avoid drone noises, which can rise through outside influences, we advise to use the DC line filter, if you use the power unit in living areas. Every power unit can change for wall tempering and mould remediation, look reconstruction packages page Number Name Description * Power unit UP 400 Flush mounted with 400 W Power unit UP 800 Flush mounted with 800 W Power unit UP 1200 Flush mounted with 1200 W Power unit UP 1600 Flush mounted with 1600 W ** Power unit SC 400 Switch cabinet mounting with 400 W *** Power unit SC 2000 Switch cabinet mounting with 2000 W Flush mounted power units can be installed in the wall, with our installation boxes ( / ). * For installation box small ** For switch cabinet application and installation box big *** ONLY for switch cabinet application 3

4 Number Name Description Power unit 1200 Installation on wall with 1200 W Power unit 2000 Installation on wall with 2000 W Surface power units can easily and direct, with the help of our drilling template, installed on the wall The power plug realized a fast and easy installation. For small construction areas and especially for the mold reconstruction, we offer the hicotherm power unit with less power. This power unit is equipped with a plug and a temperature sensor, especially suitable for small areas. The installed temperature is 16 C (adjustable) Number Name Description Reconstruction Power Unit Power unit with plastic case for wall installation and flush mounting AP 100 Power 100 W Equipped with plug and temperature sensor 186 x 123 x 41 mm 4

5 Controller Thanks to the modern PI control your desired room temperature is reached quickly and energy-saving at the same time. This system approaches the desired temperature without exceeding the temperature. Number Name Description Digital wired controller UP standard flush mounted HT-R010 9 weekly programms 6 changes per day PI-control Analog wireless controller standard easy operating via control wheel HT-R120 night-time temperature reduction wireless 5

6 Digital wireless controller standard 9 weekly programms HT-R110 6 changes per day PI-control wireless Digital wireless controller comfort wireless HT-R130 controllable via mobile phone**** clearly arranged big display PID-control Incl. base **** additional GSM Modul has to be purchased 6

7 Accessories Number Name Description Installation box big for UP power units from 800 W HT-Z003 plastic case with lid 305 x 315 x 85 mm inclusive lock Installation box small for UP power units 400 W HT-Z x 208 x 68 mm plastic case with lid Temperature sensor connection to power unit or HT-Z001 controller HT-R 010 length: 3 m prolongable up to 30 m 7

8 slot housing for surface mounting for 3 power units UP* + SC easy wall mounting aluminium installation plate plastic cover * unsuitable for power unit UP 400 open close slot housing for surface mounting for power unit 400 SC or 800 UP 265 x 220 x 85 mm Fixture on the mounting plate of the power unit plastic 8

9 Switch cabinet 8 Slots (400 W to 2000 W) power supply is primary and secondary fused including ventilator enclosures with door made of sheet steel inclusive lock 1100 x 600 x 400 mm Antenna for switch cabinet increase the radio range positioning out of the switch cabinet magnet foot cable 2.5 m 9

10 Radio antenna increase the radio range HT-Z002 for power units AP Cable radio antenna increase the radio range HT-Z008 for power units UP Crimp connector insulated 2.5 mm² cable splicer 2.5 mm² HT-Z020 inclusive shrink tubing PU: 20 pieces 10

11 Crimp connector insulated 6 mm² cable splicer 6 mm² HT-Z021 inclusive shrink tubing PU: 20 pieces Cable lug 6.3 mm non insulated 2.5 mm² compatible for Y-connector HT-Z mm² cable PU: 20 pieces Cable lug 6.3 mm non insulated 6 mm² compatible for Y-connector HT-Z023 6 mm² cable PU: 20 pieces 11

12 Insulated terminals pin type 6mm² Connecting the heating film HT-Z025 with the power unit PU: 20 pieces Set: Y-connector insulated mm² 2 x Y-connector HT-Z024 2 x shrink tubing 10 cm Ready-made junction for heating film with Y-connector-Set (water proof) Set: Y-connector insulated Crimper (for cable lug 6.3 mm non insulated) HT-Z100 12

13 DC-linefilter 250 V / 8 A 50 x 40 x 30 mm Prevents vibration noise of the power unit, by filtering the disturbing DC components from the mains 13

14 Cable These cables are especially for house construction. Because of the resistant PUR-insulation the cable can installed directly in the masonry or in the plaster. Number Name Description PUR-cable 2.5 mm² black 100 m PUR-cable 2.5 mm² black 25 m PUR-cable 6 mm² black 100 m PUR-cable 6 mm² black 25 m PUR-cable 2.5 mm² blue 100 m PUR-cable 2.5 mm² blue 25 m PUR-cable 6 mm² blue 100 m PUR-cable 6 mm² blue 25 m PUR-twin cable 2 x 2.5 mm² black with red sideline 25 m PUR-twin cable 2 x 2.5 mm² black with red sideline 50 m PUR-twin cable 2 x 6 mm² black with red sideline 25 m PUR-twin cable 2 x 6 mm² black with red sideline 50 m 14

15 Reconstruction packages The reconstruction packages available in big (B) and small (S), in the big package you get the hicotherm V with the wide of 60 cm, in the small package you get the hicotherm V with the wide of 17 cm. The packages are available with power of 100 W or with 400 W, in each package you get the following parts. The power units are set on 16 C for the sensor. Reconstruction package 100 W Number Description reconstruction package 100W-B Following parts 1x Reconstruction Power Unit AP 100 1x m - hicotherm V with 2.5 m cable reconstruction package 100W-S Following parts 1x Reconstruction Power Unit AP 100 2x m - hicotherm V with 2.5 m cable 15

16 Reconstruction package 400 W Number Description reconstruction package 100W-B Following parts 1x Power unit UP 400 1x Temperature sensor 1x Installation box small 4x m - hicotherm V 1x m PUR-cable 2.5 mm² black 1x m PUR-cable 2.5 mm² blue 1x pcs. Crimp connector insulated 2.5 mm² reconstruction package 100W-S Following parts 1x Power unit UP 400 1x Temperature sensor 1x Installation box small 4x m - hicotherm V 1x m PUR-cable 2.5 mm² black 1x m PUR-cable 2.5 mm² blue 1x pcs. Crimp connector insulated 2.5 mm² 16