Package View. TSSOP-16EP (Type DX) DETAIL 'A' 01( 18x) 02 R1 R L L1

Transcription

1 PKGE INFORMTION Mechanical Data Package View Surface Mount Package ase Material: Molded Plastic, UL Flammability Rating 94V-0 Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: grams (pproximate) Moisture Sensitivity: Level 1 per J-STD-020 Max Soldering Temperature +260 for 30 secs as per JEDE J-STD-020 Package Outline Dimensions e3 TSSOP-16EP (Type DX) E/2 E PIN 1 e D b E1 SETING PLNE D2 E2 DETIL '' 01( 18x) 02 R1 R L L1 c 0 L2 SEE DETIL '' GUGE PLNE TSSOP-16EP (Type DX) Dim Min Max Typ b c D D E 6.40 BS E E e 0.65 BS L L REF L BS R R θ θ θ ll Dimensions in mm Suggested Pad Layout TSSOP-16EP (Type DX) X3 Y3 Y2 X1 X2 Y1 Y Dimensions Value (in mm) 0.65 X 0.35 X X X Y 1.40 Y Y Y X The suggested land pattern dimensions have been provided for reference only, as actual pad layouts may vary depending on application. These dimensions may be modified based on user equipment capability or fabrication criteria. more robust pattern may be desired for wave soldering and is calculated by adding 0.2 mm to the Z dimension. For further information, please reference document IP-7351, Naming onvention for Standard SMT Land Patterns, and for International grid details, please see document IE, Publication 97. For high voltage applications, the appropriate industry sector guidelines should be considered with regards to creepage and clearance distances between device Terminals and PB tracking. 1 of 5

2 Minimum Packing Quantity Quantity Tape Width Part Number Suffix 13 Reel 2,500 12mm -13 Package quantities given are for minimum packaging quantity only, not minimum order quantity. For minimum order quantity, please contact Sales Department. No mixed date codes or partial quantity (less than minimum packaging quantity) per packaging is allowed. In no case shall there be two or more consecutive components missing from any reel for any reason. Device Tape Orientation Tape Width Part Number Suffix Tape Orientation Pin 1 12mm -13 Direction of feed For part marking, refer to product datasheet. Tape and package drawings are not to scale and are shown for device tape orientation only. Embossed arrier Tape Specifications t P2 P0 P Ø D 10 pitches cumulative tolerance on tape +/-0.2mm Ø D1 E B1 B0 F W 0 K1 K0 Direction of Feed enter lines of cavity Tape Width (W) Dimension Value Dimension Value Dimension Value 12mm E 1.75 ±0.10 P0 4.0 ±0.10 B F 5.50 ±0.05 P2 2.0 ±0.05 B K t 0.30 ±0.05 D /-0.0 K W 12.0 ±0.30 D min P 8.0 ±0.10 The clearance between the component and the cavity must comply to the rotational and lateral 0 B0 K0 movement requirement provided in figures in the "Maximum omponent Movement in Tape Pocket section. 2 of 5

3 Embossed arrier Tape Specifications (ontinued) 3 of 5

4 Maximum omponent Movement in Tape Pocket 4 of 5

5 Surface Mount Reel Specifications T B* D* N Full Radius * Drive spokes optional. If used, dimensions with asterisks apply. G [Measured at hub] Tape Width Reel Size B Max D Max N Min G T Max 12mm ± ± ± Tape Leader and Trailer Specifications User Direction of Feed END Min. 390mm Top over Tape STRT Min. 160mm Trailer Tape (No omponents) Min. 160mm Leader Tape (No omponents) arrier Tape Sealed with over Tape There shall be a leader of at least 230mm which may consist of carrier tape and/or cover tape or a start tape followed by at least 160mm of empty carrier tape sealed with cover tape. There shall be a trailer of at least 160mm of empty carrier tape sealed with cover tape. The entire carrier tape must release from the reel hub as the last portion of the tape unwinds from the reel without damage to the carrier tape and the remaining components in the cavities. 5 of 5