DBS Installation Guide

Transcription

1 DBS Installation Guide

2 Model No. I. DBS Units and Models Product Picture Description DM-400D Teacher Panel Support 80 students in matrix. Full functions: teacher broadcast student broadcast, auto observe, area observe, darken, dialog, TalkII and group functions. DM-3162D Teacher Console Support two teacher control sources. 2 VGA/ earphone/ MIC. With high audio & video quality. BT-2088 Booster Connecting by STP 8P8C cable, and standard RJ- 45 connector. With 1 BUS IN and 8 BUS OUT, to amplify the signal. Each port can support 10~12 students. (depends on the real layout) SB-1082A5S Student Unit Support two student PC, 2 VGA/earphone/ MIC, with full student interactive functions. By-pass function. High audio and video quality. USB BOX Kb/M Control Box Remote control keyboard/ mouse. With the USB box, it can achieve teacher student, student teacher and student student controls. DM-316BV AV Converter Multimedia converter supports various inputs of AV signals.

3 II. Accessories 1. DM-400D I. In the Package II. Accessories. Model/ Name Picture Description DM-400D Control Panel POWER CABLE Power Cord CAT5E 1.8M BUS Cable TER-8-M Terminator

4 2. BT-2088 I. In the Package II. Accessories Model/ Name Picture Description BT-2088 Booster POWER CABLE Power Cord TER-8-M Terminator

5 3. DM-3162D I. In the Package II. Accessories Model/ Name DM-3162D Picture Description Teacher Console CAT5E 1.8M BUS Cable m VGA VGA Cable (between PC and Teacher Console) AUDIO CABLE Audio cable (between PC and Teacher Console) SWITCH POWER Power Adapter for Teacher Console

6 4. SB-1082A5S I. In the Package II. Accessories Model/ Name Picture Description DM-3162D Student Unit CAT5E 1.8M BUS Cable m VGA VGA Cable (between PC and Student Unit) AUDIO CABLE Audio Cable (between PC and Student Unit) HELP KEY Help Key SWITCH POWER Power Adapter for Student Unit

7 5. USB-BOX I. In the Package II. Accessories Model/ Name Picture Description USB- BOX Remote Keyboard/ mouse control box USB CABLE For USB-BOX BOX power supply

8 6. DM-316BV II. Accessories Model/Name Picture Description I. In the Package DM-316BV POWER CABLE AV Converter; Supports 4 AV devices, and 2 VGA input Power Cord AV CABLE For AV devices m VGA AUDIO CABLE IR CABLE VGA cable, (between PC/ NB and VGA) Audio Cable (between PC/ NB and audio device) IR receiver cable 14 KEY IR remote controller

9 III. Connect the devices 1. DM-400D 1. UTP BUS: connect the 1.8m CAT5E BUS Cable to the teacher console.

10 2. DM-3162D 1. VGA2: Connect to Note book with 1.8m VGA cable. 2. C.M.: Connect to Projector with VGA cable. 3. VGA1: Connect to teacher PC video card with 1.8m VGA cable. 4. LCD1: Connect to teacher monitor 1. LINE IN: connect to teacher PC sound card with 1.8m audio cable. 2. HEADSET/MIC 3. BUS IN: connect to BT-2088 with CAT5E cable. 4. BUS OUT: Connect Terminator 5. BUS OUT: Connect to DM-400D with 1.8m CAT5E cable. 6. LINE IN: Connect to Note Book sound card with 1.8m audio cable.

11 3. BT BUS: connect to Teacher Console 2. P1: connect to Port 1 Student Unit 3. P2: connect to Port 2 Student Unit 4. P3: connect to Port 3 Student Unit or Terminator 5. P4: connect to Port 4 Student Unit or Terminator 6. P5: connect to Port 5 Student Unit or Terminator 7. P6: connect to Port 6 Student Unit or Terminator 8. P7: connect to Port 7 Student Unit or Terminator 9. P8: connect to Port 8 Student Unit or Terminator

12 4. SB-1082A5S 1.LCD2: Connect to student 2 monitor 2.VGA2: Connect to student 2 video card with 1.8m VGA cable 3. C.M.: Connect to center monitor 4. VGA1: Connect to student 1 video card with 1.8m VGA cable 5. LCD1: Connect to student 1 monitor 1. HELP: Connect to Help Key 2. LINE IN: Connect to student 1 sound card with 1.8m audio cable. 3. HEADSET/MIC 4. BUS IN: connect to BT-2088 with CAT5E Bus Cable 5. BUS OUT: Connect to next student unit with CAT5E BUS Cable 6. HELP: Connect to Help Key 7. LINE IN: Connect to student 2 sound card with 1.8m audio cable 8. HEADSET/MIC

13 5. USB-BOX 1.UTP port: Connect to DM-400D with 1.8m CAT5E BUS cable 2. UTP port: Connect to DM-3162D with 1.8m CAT5E BUS cable

14 6. DM-316BV 1. AV1: Connect to AV Device (AV Out) 2. AV2: Connect to AV Device (AV Out) 3. AV3: Connect to AV Device (AV Out) 4. AV4: Connect to AV Device (AV Out) 5. STEREO-L/ STEREO-R: Connect to AMP 6. Headset 7. LINE IN: Connect to teacher PC sound card with 1.8m audio cable 8. MONITOR1: Connect to teacher monitor 9. VGA1: Connect to teacher PC video card with 1.8m VGA cable 10. MONITOR2: Connect to Projector 11. VGA2: Connect to Note Book with 1.8m VGA cable 12.A/B: Connect to DM-3162D with CAT5E BUS cable 13.A/B: Connect to BT-2088 with CAT5E BUS cable

15 1. DBS+AVC+USB BOX IV. Device Connection

16 2. DBS+USB BOX

17 3. DBS+AVC

18 4. DBS

19 V. Setup DBS Attention: After the hardware are installed, please setup the booster ports according to the real layout. For example, when P1 connects 5 student units, and the ID to be [01][11] [02][12] [03][13] [04][14] [05][15], which are different from the default setting. Please setup [01][02]..[05][11][12]..[15] to be P1. (Setup the port P1, P2 P8 according to the real layout), If you like to use the default setting, it is not necessary to setup the port. When the setup procedures are wrong, the Observe function will not show student screens correctly. Setup ID must be done after Setup Port. When the setup procedures are wrong, the Group function will not show student screens correctly. Default Value: 'P1'-->[01][02]...[10] 'P2'-->[11][12]...[20] 'P3'-->[21][22]...[30] 'P4'-->[31][32]...[40] 'P5'-->[41][42]...[50] 'P6'-->[51][52]...[60] 'P7'-->[61][62]...[70] 'P8'-->[71][72]...[80]

20 I. Setup Port: Press Setup for 5 times Press(+) key, LED shows P1 Press the selected student ID Press Setup/NB to confirm Press(+)key,LED shows P2 Press selected student ID Press Setup/NB to confirm Setup P3 ~ P8 Press (+) until shows 5A press Setup/ NB to save II. Setup Student ID: Press Setup for 5 times Press the selected student ID Press the student unit Help Key Press Setup/ NB Finish to the next student

21 III. BSNT Installation 1. Teacher software (Master) installation (1) Teacher (Master) file is KBM-Master.exe (2) Installation page (3) Select single or all users to install this program

22 (4) The setting after installation Launch the program (Auto-run KBM program) FireWall Authentication Setting, automatically exclude KBM program from Windows firewall. (5) Teacher s setup page DBS Black DBS White (6) This icon shows when installation is successful. MBS System

23 Student software (Client) installation (1) Student (Client) file is KBM-Client.exe (2) The procedures are the same as M (3) The student setup page Input student ID Select the IP or name 1. Teacher PC name 2. Teacher PC IP (4) This icon shows when installation is successful.

24 DBS Panel ID and software ID reference chart Teacher ID: 250 Panel/ ID Panel/ ID Panel/ ID Panel/ ID Panel/ ID Panel/ ID Panel/ ID Panel/ ID 10 / 9 20 / / / / / / / / 8 19 / / / / / / / / 7 18 / / / / / / / / 6 17 / / / / / / / / 5 16 / / / / / / / / 4 15 / / / / / / / / 3 14 / / / / / / / / 2 13 / / / / / / / / 1 12 / / / / / / / / 0 11 / / / / / / / 70

25 VI. Operation Guide Basic Operation: Teacher (1) Broadcast: Press [Teacher Broadcast] Teacher(2 NOTE BOOK) Broadcast: Press [SET/ NB] [Teacher Broadcast] Teacher Area Broadcast: Press [student ID] [Teacher Broadcast] Student Broadcast to all: [student ID] [Student Broadcast] [Execute] Student Area Broadcast: [student ID] [Student Broadcast] [student ID] [Execute] Observe: press [Observe] and adjust timer LED/[+][-] Area Observe/ Single Observe: [student ID] [Observe] All Darken: Press [Darken] Area Darken: [student ID] [Darken] Keyboard/ mouse control function: (optional; please install BSNT software) Teacher controls student: 1. [student ID] [Observe] [KB/M] 2. [student ID] [Student Broadcast] [Execute] [KB/M] Student controls teacher: [Teacher Broadcast] [student ID] [KB/M] Student controls student: [student ID] [Student Broadcast] [Execute] [Student ID] [KB/M]

26 DM-400 to AVC Operation (1). Broadcast AV1 to students Under [Break] mode [Teacher Broadcast] (counter shows A1) [Observe] (2). Broadcast AV1 to AUX monitor Under [Break] mode [Teacher Broadcast] (counter shows A1) [AUX monitor] Select AVC source [+] AVC source UP [-] AVC source DOWN Broadcast AVC to student monitor and AUX monitor [AUX] (ON/OFF)

27 Detect Student Unit ON_LINE setting: Student Unit set to be not to detect PC on-line status (when PC is power-off or no PC, the DBS can still broadcast to students): Press [Setup] 5 times [MIC] [Break] (Student LED on) Student Unit set to be detect PC on-line status (When OC is poweron, DBS can broadcast to students): [Setup] 5 times [AUDIO] [Break] (Student LED off) Twin monitor ON setting: (Teacher uses twin monitors, one is for teacher PC; the other is for Observe function) Twin monitor AUX mode (AUX ON): Press [Setup] 5 times [KB/M] (Teacher s LCD1 cannot observe student monitors; please use C.M port to observe) Normal Mode (AUX OFF): Press [Setup] 5 times, [Dialog] (Teacher s LCD1 can observe student monitors; C.M. port is for projector)