A. All equipment and materials used shall be standard components that are regularly manufactured and used in the manufacturer s system.

Transcription

1 ESPRIT SERIES POSITIONING SYSTEM TECHNICAL SPECIFICATIONS SECURITY SYSTEM DIVISION 28 ELECTRONIC SAFETY AND SECURITY LEVEL ELECTRONIC SURVEILLANCE LEVEL VIDEO SURVEILLANCE LEVEL VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS PART 2 - PRODUCTS 2.01 GENERAL A. All equipment and materials used shall be standard components that are regularly manufactured and used in the manufacturer s system. B. All systems and components shall have been thoroughly tested and proven in actual use. C. All systems and components shall be provided with the availability of a toll-free (U.S. and Canada), 24-hour technical assistance program (TAP) from the manufacturer. The TAP shall allow for immediate technical assistance for either the dealer/installer or the end user at no charge for as long as the product is installed. D. All systems and components shall be provided with a one-day turnaround repair express and 24-hour parts replacement. The repair and parts express shall be guaranteed by the manufacturer on warranty and nonwarranty items OUTDOOR CCTV CAMERA PAN/TILT POSITIONING SYSTEM A. The indoor/outdoor CCTV camera pan and tilt drive advanced thermal imaging system shall combine with an integral, environmental, variable speed/high speed pan and tilt drive unit with continuous 360 degrees rotation; integrated optics cartridge, consisting of a lens, camera unit, and mount.. B. The indoor/outdoor CCTV thermal imaging camera system shall consist of an advanced uncooled vanadium oxide microbolometer capable of 320 x 240 resolution, multiple display formats, 2x digital zoom, onscreen programmability, combined with an integral, environmental, variable speed/high speed pan and tilt drive unit with continuous 360 degrees rotation. C. The outdoor CCTV camera pan and tilt drive system shall meet or exceed the following specifications defined by pan and tilt drive unit, camera, lens, and operations: 2.03 PAN/TILT DRIVE UNIT SPECIFICATIONS A. General Construction Die-cast, extruded, and sheet aluminum; stainless steel hardware B. Finish Gray polyester powder coating C. Viewing Window 3 mm thick hard carbon coated Germanium D. Drive Unit Cogged belt drive with 0.9 stepper motor operation in microstep mode E. Motors Sealed bearings attached without gear head attached

2 Page 2 F. Limit Stops Nonmechanical; programmable for manual panning, auto/random scanning, and frame scanning G. Wiring Internally prewired with no exposed wiring from the mount to the camera enclosure H. Video Coaxial Cable Maximum Wiring Distances RG59/U 750 feet (229 m) RG6/U 1,000 feet (305 m) RG11/U 1,500 feet (457 m) I. Programming Built-in, user-friendly menu system for on-screen setup of pan/tilt and thermal camera settings; programming stored on non-volatile memory chip J. Azimuth Zero Programmable to 0 point to correspond to true or magnetic north compass readings K. Azimuth/Elevation Programmable on-screen readout of azimuth from 0 to 359 and elevation from +33 to -83 L. Direction Display Programmable on-screen readout of compass directions (N, NE, NW, E, SE, S, SW, and W) M. Mode of Operation Selectable at power-up N. Zones 8, programmable in size with 20-character label for each and with the ability to blank the video in the zone O. Auxiliary Output 1, which shall be an open collector rated at 32 VDC maximum at an output of 40 ma and which shall deactivate automatically after two seconds of activation P. Pattern 1 for a maximum of six minutes or 2 for a maximum of three minutes each Q. Receiver Integral with automatic sensing for selection of protocol R. Protocol Coaxitron ; Pelco P and Pelco D, RS-422 S. Addressing Selectable DIP switches T. Pan Control Variable and proportional to depth of zoom U. Pan Rotation 360 continuous rotation V. Pan Speed 1. Winds 50 MPH Manual control variable from 0.1 to a maximum of 40 Turbo mode up to a maximum 100 Preset mode up to a maximum Winds 90 MPH Manual control variable from 0.1 to a maximum of 40 Turbo mode up to a maximum 50 Preset mode up to a maximum 50 W. Vertical Tilt +33 to -83 unobstructed X. Tilt Speed 1. Winds 50 MPH Manual control variable from 0.1 to a maximum of 20 Turbo mode up to a maximum 30 Preset mode up to a maximum 30

3 Page 3 2. Winds 90 MPH Manual control variable from 0.1 to a maximum of 20 Turbo mode up to a maximum 30 Preset mode up to a maximum 30 Y. Presets 64, with 20-character label for each preset position Z. Preset Accuracy +/-0.25 AA. Remote Data Port Compatible Ability to control and set up unit through optional remote data port that is located in area with easy access; compatible with personal computers and PDAs such as Palm and ipaq AB. RS-422 Position Feedback ASCII output of azimuth, elevation, and zoom factor AC. RS-422 Direct Positioning ASCII command capability for exact positioning based upon azimuth, elevation, and zoom factor AD. Third-Party Control Systems Ability to plug in optional board that converts control signals from selected third-party controllers 2.04 INTEGRAL ENCLOSURE ASSEMBLY A. Integral Enclosure Assembly Part of pan/tilt unit, thermal imaging camera assembled at factory B. Access Forward-opening lid with spring assist C. Latch Stainless steel clamp capable of being padlocked D. Temperature Protection Standard with factory-installed defroster/defoggers, thermostatically controlled heaters, thermal insulation, and sun shroud E. Camera and Lens Assembly Installed in the enclosure at the factory F. Camera and Lens Connectors Plug-in type for easy removal G. Camera Mounting Integrated thermal camera assembly 2.05 POWER TRANSFORMER MODULE ASSEMBLY A. Power Transfer Module Integral part of the mounting of the pan/tilt unit B. Voltage Input Selectable 24, 120 or 230 VAC, 50/60 Hz; switch selectable for 120/230 VAC inputs C. Voltage Input Range +/-10% D. Power/Control Connection Single 12-position pigtail including power, video, auxiliary function output, and control wiring E. Power Consumption Maximum 70 VA F. Operating Temperatures -40 to 131 F (-40 to 55 C) G. Operating Environment Remains operational in 90 mph wind conditions; withstands 130 mph 2.06 INTEGRAL THERMAL CAMERA/OPTICS A. Integration Integrated with pan/tilt drive B. Programming Built-in, on-screen setup, accessible through pan/tilt/camera programming menu using standard Pelco controller C. Detector Uncooled microbolometer, Vanadium Oxide

4 Page 4 D. Array Front 320x240 E. Pixel Size 38 micrometers F. Spectral Response 7.5 to 13.5 micrometers G. Video Output NTSC/PAL H. Normalization Source Internal Shutter (offset only), 0.7 sec video freeze during shutter wink I. Time to Image <2 sec, no thermoelectric cooler (TEC) J. Image Control 2x digital zoom K. Serial Command RS-232 Compatible L. Scene Temp Range Lens Dependant To 150 C standard; optional auto-gain mode extends range to 560 C M. Display Types Multiple display types selectable through pan/tilt/camera programming menu N. Hot Keys Display settings can be toggled during use, using pre-programmed commands initiated by a standard Pelco controller 2.07 PHYSICAL SPECIFICATIONS A. General Construction Die-cast, extruded, and sheet aluminum; stainless steel hardware B. Finish Gray polyester powder coating C. Dimensions 13.4 (L) x 7.7 (W) x 17.0 (H) (33.9 x 19.6 x 43.2 cm), positioned horizontally (not including mount) D. Weight 20 lb with Pedestal Adapter 22 lb with Wall Mount 2.08 CERTIFICATIONS A. All Models CE Class B B. NTSC Models UL Listed UL Listed to Canadian Safety Standards FCC Class B C. Pan/Tilt and Enclosure NEMA 4X and IP66 standards D. U.S. Patents 340,940 and 5,224, MANUFACTURER S WARRANTY A. Repair or Replacement: Defective parts for a period of two years from the date of shipment, including continuous motion modes 2.10 PELCO MODEL NUMBERS A mm Lens: 1. ES3014TI-2N NTSC; 24 VAC, Pedestal Mount 2. ES3014TI-2N-1 NTSC 9 Hz; 24 VAC, Pedestal Mount

5 Page 5 3. ES3014TI-2N-X PAL; 24 VAC, Pedestal Mount 4. ES3014TI-2N-X1 PAL 9 Hz; 24 VAC, Pedestal Mount 5. ES3014TI-2W NTSC; 24 VAC, Wall Mount 6. ES3014TI-2W-1 NTSC 9 Hz; 24 VAC, Wall Mount 7. ES3014TI-2W-X PAL; 24 VAC, Wall Mount 8. ES3014TI-2W-X1 PAL 9 Hz; 24 VAC, Wall Mount 9. ES3014TI-5N NTSC; 120/230 VAC, Pedestal Mount 10. ES3014TI-5N-1 NTSC 9 Hz; 120/230 VAC, Pedestal Mount 11. ES3014TI-5N-X PAL; 120/230 VAC, Pedestal Mount 12. ES3014TI-5N-X1 PAL 9 Hz; 120/230 VAC, Pedestal Mount 13. ES3014TI-5W NTSC; 120/230 VAC, Wall Mount 14. ES3014TI-5W-1 NTSC 9 Hz; 120/230 VAC, Wall Mount 15. ES3014TI-5W-X PAL; 120/230 VAC, Wall Mount 16. ES3014TI-5W-X1 PAL 9 Hz; 120/230 VAC, Wall Mount B. 35 mm Lens: 1. ES3035TI-2N NTSC; 24 VAC, Pedestal Mount 2. ES3035TI-2N-1 NTSC 9 Hz; 24 VAC, Pedestal Mount 3. ES3035TI-2N-X PAL; 24 VAC, Pedestal Mount 4. ES3035TI-2N-X1 PAL 9 Hz; 24 VAC, Pedestal Mount 5. ES3035TI-2W NTSC; 24 VAC, Wall Mount 6. ES3035TI-2W-1 NTSC 9 Hz; 24 VAC, Wall Mount 7. ES3035TI-2W-X PAL; 24 VAC, Wall Mount 8. ES3035TI-2W-X1 PAL 9 Hz; 24 VAC, Wall Mount 9. ES3035TI-5N NTSC; 120/230 VAC, Pedestal Mount 10. ES3035TI-5N-1 NTSC 9 Hz; 120/230 VAC, Pedestal Mount 11. ES3035TI-5N-X PAL; 120/230 VAC, Pedestal Mount 12. ES3035TI-5N-X1 PAL 9 Hz; 120/230 VAC, Pedestal Mount 13. ES3035TI-5W NTSC; 120/230 VAC, Wall Mount 14. ES3035TI-5W-1 NTSC 9 Hz; 120/230 VAC, Wall Mount 15. ES3035TI-5W-X PAL; 120/230 VAC, Wall Mount 16. ES3035TI-5W-X1 PAL 9 Hz; 120/230 VAC, Wall Mount C. 50 mm Lens: 1. ES3050TI-2N NTSC; 24 VAC, Pedestal Mount 2. ES3050TI-2N-1 NTSC 9 Hz; 24 VAC, Pedestal Mount 3. ES3050TI-2N-X PAL; 24 VAC, Pedestal Mount 4. ES3050TI-2N-X1 PAL 9 Hz; 24 VAC, Pedestal Mount 5. ES3050TI-2W NTSC; 24 VAC, Wall Mount 6. ES3050TI-2W-1 NTSC 9 Hz; 24 VAC, Wall Mount 7. ES3050TI-2W-X PAL; 24 VAC, Wall Mount 8. ES3050TI-2W-X1 PAL 9 Hz; 24 VAC, Wall Mount 9. ES3050TI-5N NTSC; 120/230 VAC, Pedestal Mount 10. ES3050TI-5N-1 NTSC 9 Hz; 120/230 VAC, Pedestal Mount 11. ES3050TI-5N-X PAL; 120/230 VAC, Pedestal Mount 12. ES3050TI-5N-X1 PAL 9 Hz; 120/230 VAC, Pedestal Mount 13. ES3050TI-5W NTSC; 120/230 VAC, Wall Mount 14. ES3050TI-5W-1 NTSC 9 Hz; 120/230 VAC, Wall Mount 15. ES3050TI-5W-X PAL; 120/230 VAC, Wall Mount 16. ES3050TI-5W-X1 PAL 9 Hz; 120/230 VAC, Wall Mount (Revised September 5, 2007)