VT VGA TFT NEMA 4/12 Flat Panel Monitor. User s Guide
|
|
- Melissa Wiggins
- 5 years ago
- Views:
Transcription
1 VT VGA TFT NEMA 4/12 Flat Panel Monitor User s Guide (A) (was document no. 920A0001 version 1.1), revised 01/98 Viewtronix
2 Viewtronix reserves the right to make changes in specifications described herein at any time without notice in order to improve design and reliability. Viewtronix does not assume any responsibility for the use of any circuitry described; no circuit patent licenses are implied. Viewtronix assumes no responsibility for damage caused by misuse or improper use of its products. WARRANTY Viewtronix warrants to Customer that the Products will be free from defects in material and workmanship under normal use and service for a period of one year from date of invoice. Customer s exclusive remedy for breach of this warranty is that Viewtronix will either (i) repair or replace, at its option, any Product which fails during the warranty period because of such defect (if Customer promptly reported the failure to Viewtronix in writing) or, (ii) if Viewtronix is unable to repair or replace, Viewtronix will refund the purchase price of the Product upon its return to Viewtronix. This warranty does not apply to any Product which has been subjected to misuse, abnormal service or handling, or which has been altered or modified in design or construction, or which has been serviced by anyone other than Viewtronix. The warranty set forth herein is in lieu of, and exclusive of, all other warranties, express or implied. Document No (A) (was 920A0001 version 1.1) Revised 01/98 2
3 Table of Contents Introduction...4 Specifications...5 Front and Side View of Monitor...6 Installation of Monitor...6 Cutout Pattern for Monitor...7 Video Signal Adjustment...7 Adjustment Procedure...8 Back Light Replacement Procedure...9 Trouble Shooting Guide...10 VGA Input Connector Pin Out
4 Introduction The VT1040 is a 10.4 VGA TFT industrial flat panel monitor for use in NEMA 4 and NEMA 12 applications. Graphics and text can be displayed on the monitor in up to 262,144 colors. The VT1040 will operate in 350 x 640, 400 x 640 and 480 x 640 display modes. The unit is fully self-contained needing only to be panel mounted in an appropriate enclosure and connected to 120/240 VAC and a VGA source. The monitor features a bright 300-nit LCD display with long life back lights (25,000 Hours). The unit is designed to provide easy and quick access for tool free back light replacement and cleaning. The VT1040 is available with an optional integrated analog resistive touch screen. 4
5 Specifications DISPLAY PARAMETER SPECIFICATION Display Size 10.4 Diagonal Active Area 8.32 (H) x 6.24 (V) Pixel Format 640 (H) x 480 (V) Pixels (1 Pixel = R + G + B Dots) Brightness 240 Nit Minimum, 300 Nit Typical Back Light Life 25,000 Hrs Minimum Contrast Ratio >100:1 Number Colors 6 bits / color (262,144 Total Colors) PHYSICAL PARAMETER Monitor Outside Dimensions Monitor Weight Operating Temperature Storage Temperature Relative Humidity Operating Vibration Operating Shock Operating Altitude SPECIFICATION 10.5 (H) x 12.6 (W) x 3.25 (D) 10 Pounds 0 ~ 55 Degrees Centigrade -25 ~ 75 Degrees Centigrade 5% ~ 90%, Non-condensing 5 ~ 500 Hz, 1G 15G for 11ms 40,000 Feet Above Sea Level ELECTRICAL PARAMETER SPECIFICATION Input Voltage Input Power 90 ~ 264 VAC, 47 ~ 440 Hz 25 W COMPLIANCE PARAMETER SPECIFICATION NEMA Rating NEMA 4/12 From front when properly installed in an enclosure. EMC FCC Part 15, Class A / Industry Canada ICES-003 Issue 2, Rev. 1 / EN , 4-3, 4-4 / EMC Directive 89/336/EEC (Pending) Safety UL-1950 / CUL/CSA M93/ EN60950 / Low Voltage Directive 73/23/EEC (Pending) 5
6 Front and Side View of Monitor Installation of Monitor This monitor is intended to be mounted in and used where NEMA 4 and NEMA 12 type enclosures are employed. When mounted properly, the monitor meets or exceeds the sealing requirements set forth in the NEMA 4 and NEMA 12 specifications. The monitor uses U -shaped clips and a special gasket to achieve the proper seal. To install the monitor, make a cutout per the diagram below in one of the walls of your NEMA enclosure. Enclosures made of heavier gauge metal work better in that they won t deform or bend as easily when the monitor s sealing gasket is compressed. Next hold the monitor in place while you install the mounting clips. Tighten the clips in a cross pattern. This will help to develop an even pressure on the sealing gasket. Tighten the clips to the point were the back of the monitor s front bezel just begins to contact the front of the NEMA enclosure. DO NOT OVER TIGHTEN AS DAMAGE CAN RESULT IN THE MONITOR CAUSING LOSS OF SEALING INTEGRITY. 6
7 Cutout Pattern for Monitor Video Signal Adjustment Not all VGA controllers produce exactly the same video output levels or the same timing. The following procedure can be used to optimize your monitor s performance. When adjusting your monitor, the use of video test software such as DisplayMate for Windows by SONERA Technologies can be very beneficial. When adjusting the monitor s screen width and vertical & horizontal position in the 480 x 640 mode, use an image with only white pixels on in the 1 st and 640 th columns and the 1 st and 480 th row with all other pixels off. Use a similar pattern for setting width and position in the 350 x 640 and 400 x 640 modes. When setting the clock pot, a checker board image with every other pixel white (all others black) or an image with alternating white and black columns (one pixel wide each) is most helpful. 7
8 Adjustment Procedure STEP ACTION Power OFF, Video OFF Initial setup condition Initial Pot Setting CLOCK pot full clockwise. BLACK pot full clockwise.* BRIGHT pot full counter-clockwise. CONTRAST pot full clockwise. Power ON Turn power ON to the monitor. The monitor should recognize the absence of incoming video and flash the FAULT LED rapidly. The ACTIVE LED should be OFF. Video ON Start video signal. FAULT LED should be OFF and the ACTIVE LED should be ON. Set Black Level* Turn BLACK pot counter-clock until image starts to appear Identify a black object in the image and adjust the pot for the desired black level. Set Contrast Turn CONTRAST pot either direction until image presents all colors equally- not too white or to too dark. Look at image detailed areas for this. Set Brightness Adjust BRIGHT pot in either direction until the image is bright without washing out detail (too white). Set Horizontal Width Push HORZ push button and hold down for about 5 seconds while watching for the FAULT LED to stay ON and the ACTIVE LED to go OFF. Push F1 (WIDER) or F2 (NARROWER) push buttons to adjust the image width. Push HORZ again quickly to save the new setting in nonvolatile memory. Push RESET to ignore changes Set Horizontal Position Push HORIZ push button and watch for the ACTIVE LED to stay ON. Push F1 (RIGHT) or F2 (LEFT) push buttons to adjust image right or left to the desired location. Push HORZ again quickly to save the new setting in nonvolatile memory. Push RESET to ignore changes. Set Vertical Position Push VERT push button and watch for the ACTIVE LED to stay on. Push F1 (UP) or F2 (DOWN) push buttons to adjust image up or down to the desired location. Push VERT again quickly to save new settings in nonvolatile memory. Push RESET to ignore changes. RESET To be sure changes are stored in non-volatile memory, press RESET. Image should reappear with settings just applied Set CLOCK Pot Turn CLOCK pot in either direction to obtain the sharpest image. * This pot is located inside the monitor and is factory set. In most situations, the user should ignore these steps. 8
9 Back Light Replacement Procedure After 25,000 hours of use, the two lamps used for back lighting in the LCD may become dim or burn out. You may return the monitor to Viewtronix for lamp replacement or you can order new lamps and follow the procedure below to install them. You can perform the lamp replacement procedure without removing the monitor from the NEMA enclosure were it is mounted, but it is recommended you do this only if it is a clean environment. Otherwise, the procedure is better performed at a service bench. TURN THE MONITORS POWER OFF AND DISCONNECT THE LINE CORD! Loosen the four thumbscrews that hold the back of the monitor on. Separate the two halves of the monitor. If the unit is equipped with a touch screen, you will have to disconnect its cable. The lamps are mounted in small plastic carriers that slide in the right side of the LCD display at the top and bottom edges. Note their orientation and then unplug the two sets of lamp wires (3 pink and white silicone wires) from the nearby inverter. Look in the hole where the lamp is presently installed and note the small black locking tab on the front side of each hole. With a small slotted screwdriver, depress the tab while carefully pulling on the wires and slide the lamps outward. Discard the old lamps. Carefully slide the new lamps fully into place noting the top lamp has a small triangle molded in the end where the wires protrude. Similar triangles a stamped in the LCD s sheet metal near the top hole. Reconnect the lamp wires to the inverter. These are keyed connectors permitting insertion in only one orientation. You may now want to clean the LCD and the inside of the monitor s window or touch screen with a slightly damp soft cloth. Carefully reunite the two monitor halves remembering to reconnect the touch screen cable if the unit is so equipped. The lamp replacement procedure is now complete. 9
10 Trouble Shooting Guide Symptom Possible Cause Action No LCD display image No video signal Check to see that video source is No power on and operating, perhaps using another monitor. The monitor will flash the FAULT LED if no video syncs are present. Make sure the fuse is good and the unit is turned on. Verify the pot settings as indicated above in the video adjustment section. Too low BLACK will inhibit LCD image is too bright or white Adjustments Unrecognizable sync patterns VGA controller vertical refresh set >60Hz VGA controller set for >16-bit color LCD image is not centered Adjustments Unrecognizable format VGA controller vertical refresh set >60Hz VGA controller set for >16-bit color LCD image will not adjust or will not adjust vertically display. Reset the pots and follow the instructions above for setting the video image. Verify the video format supplied to the board. The monitor only recognizes 640 x 480, 640 x 400 and 640 x 350 PC formats at 60 Hz vertical refresh. Also check to see that your VGA controller is set to 16-bit color or less. Other formats or resolutions may cause the display to roll as well. Reset the image using video positioning instructions above. Different video sources have different timing characteristics. Verify the video format supplied to the board. The monitor only recognizes 640 x 480, 640 x 400 and 640 x 350 PC formats at 60Hz vertical refresh. Also check to see that your VGA controller is set to 16-bit color or less. Other format or resolutions may cause the display to roll as well Adjustments When using the video frame position push buttons, be sure the ACTIVE LED come on steadily before pushing F1 of F2. If you press HORIZ or VERT too fast, and do not hold the button in, the monitor will not recognize the input as your request to enter position modes. The ACTIVE LED will continue to flash at 1 Hz. 640 x 400 and 640 x 350 modes are centered automatically by the LCD display panel. These modes may be positioned horizontally only. 10
11 Symptom Possible Cause Action Image position changes are not remembered by the controller. Image is not stable (i.e. rolls or jitters). Adjustments When exiting the positioning modes by pushing the RESET button, all changes made in the current session are not saved to nonvolatile memory. Previously saved positions are restored from nonvolatile memory on power up of RESET. Position changes are stored only by exiting the positioning mode by pushing the appropriate mode button (VERT or HORZ). Adjustments Unrecognized video format Verify sync timing. Reposition the image with the position controls if possible. Adjust the CLOCK pot either way to see if image is affected (may assist controller to re-sync). Verify the video format supplied to the board. The monitor only recognizes 640 x 480, 640 x 400 and 640 x 350 at 60Hz vertical refresh and only up to 16-bit color. Other formats or resolutions may cause the display to roll as well. VGA Input Connector Pin Out SIGNAL NAME 15-PIN D-SHELL (FEMALE) Red 1 Green 2 Blue 3 4 GND-Digital 5 GND-Red return 6 GND-Green return 7 GND-Blue return 8 9 GND-Digital Hsync 13 Vsync
12 Xycom Automation, Inc Fax: AT-XYCOM Northern Europe Sales: Southern Europe Sales: Xycom Automation, Inc. All rights reserved. Printed in US. All brand or product names are the property of their respective owners. Specifications may change without notice.
SXT SXGA TFT NEMA 4/12 Flat Panel Monitor. User s Guide
SXT2010 20.1 SXGA TFT NEMA 4/12 Flat Panel Monitor User s Guide 302010(A) (was document no. 920A0007 version 1.0), revised 12/98 Viewtronix Viewtronix reserves the right to make changes in specifications
More information2013, 2014 Hewlett-Packard Development Company, L.P.
User Guide 2013, 2014 Hewlett-Packard Development Company, L.P. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
More information17 19 PROFESSIONAL LCD COLOUR MONITOR ART
17 19 PROFESSIONAL LCD COLOUR MONITOR ART. 41657-41659 Via Don Arrigoni, 5 24020 Rovetta S. Lorenzo (Bergamo) http://www.comelit.eu e-mail:export.department@comelit.it WARNING: TO REDUCE THE RISK OF FIRE
More information19 / 20.1 / 22 WIDE SCREEN TFT-LCD MONITOR
19 / 20.1 / 22 WIDE SCREEN TFT-LCD MONITOR V193/ V220 Series V202 Series USER MANUAL www.viewera.com Rev. 2.0 Table of Contents EMC Compliance......1 Important Precautions...2 1. Package contents....3
More informationPL2410W LCD Monitor USER'S GUIDE.
PL2410W LCD Monitor USER'S GUIDE www.planar.com Content Operation Instructions...1 Safety Precautions...2 First Setup...3 Front View of the Product...4 Rear View of the Product...5 Quick Installation...6
More informationPLL2210MW LED Monitor
PLL2210MW LED Monitor USER'S GUIDE www.planar.com Content Operation Instructions...1 Safety Precautions...2 First Setup...3 Front View of the Product...4 Rear View of the Product...5 Quick Installation...6
More informationTRANSDUCTION USER S MANUAL. TR-LCD1900-OCD 19 Rack/Panel Mount TFT LCD Monitor with Front LCD Controls
TRANSDUCTION USER S MANUAL Version 1.0 07/02/09 TR-LCD1900-OCD 19 Rack/Panel Mount TFT LCD Monitor with Front LCD Controls 5155-23 Spectrum Way, Mississauga, ON, Canada L4W 5A1 TEL: 1-800-268-0427, 905-625-1907
More informationK Service Source. Apple High-Res Monochrome Monitor
K Service Source Apple High-Res Monochrome Monitor K Service Source Specifications Apple High-Resolution Monochrome Monitor Specifications Characteristics - 1 Characteristics Picture Tube 12-in. diagonal
More informationK Service Source. Apple High-Res Monochrome Monitor
K Service Source Apple High-Res Monochrome Monitor K Service Source Specifications Apple High-Resolution Monochrome Monitor Specifications Characteristics - 1 Characteristics Picture Tube 12-in. diagonal
More informationUser Manual 15" LCD Open frame SAW Touch Monitor KOT-0150US-SA4W. Table of Contents
User Manual 15" LCD Open frame SAW Touch Monitor KOT-0150US-SA4W Table of Contents Chapter 1. Introduction...2 1.1 Product Description 1.2 About the Product Chapter 2. Installation and Setup...2 2.1 Unpacking
More informationUSER MANUAL. 27 Full HD Widescreen LED Monitor L27ADS
USER MANUAL 27 Full HD Widescreen LED Monitor L27ADS TABLE OF CONTENTS 1 Getting Started 2 Control Panel/ Back Panel 3 On Screen Display 4 Technical Specs 5 Care & Maintenance 6 Troubleshooting 7 Safety
More informationUser s Guide L1734S Important Precautions
User s Guide L1734S Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and
More informationUser s Guide L1718S. LCD Computer Monitor
User s Guide L1718S LCD Computer Monitor Make sure to read the Important Precautions before using this product. Keep the User's Guide(CD) in an accessible place for furture reference. Have the model and
More informationHope Industrial Systems, Inc. User Manual. 12 Panel Mount Industrial Monitor Revision C. Model Numbers: HIS-ML12- _ C
Hope Industrial Systems, Inc. User Manual 12 Panel Mount Industrial Monitor Revision C Model Numbers: HIS-ML12- _ C Table of Contents SAFETY AND REGULATORY INFORMATION... 3 Warning... 3 FCC Notice... 3
More informationL203WT L203WTX. User s Guide
User s Guide L203WT L203WTX Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product
More informationPLL1920M LED LCD Monitor
PLL1920M LED LCD Monitor USER'S GUIDE www.planar.com Content Operation Instructions...1 Safety Precautions...2 First Setup...3 Front View of the Product...4 Rear View of the Product...5 Installation...6
More informationPXL2760MW LED LCD Monitor
PXL2760MW LED LCD Monitor USER'S GUIDE www.planar.com Content Operation Instructions...1 Safety Precautions...2 Package Overview...3 First Setup...4 Front View of the Product...5 Rear View of the Product...6
More informationUSER MANUAL. 22" Class Slim HD Widescreen Monitor L215DS
USER MANUAL 22" Class Slim HD Widescreen Monitor L215DS TABLE OF CONTENTS 1 Getting Started Package Includes Installation 2 Control Panel / Back Panel Control Panel Back Panel 3 On Screen Display 4 Technical
More informationL1752SE L1952SE. User s Guide
User s Guide L1752SE L1952SE Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the
More informationPLL2710W LED LCD Monitor
PLL2710W LED LCD Monitor USER'S GUIDE www.planar.com Content Operation Instructions...1 Safety Precautions...2 Package Overview...3 First Setup...4 Front View of the Product...5 Rear View of the Product...6
More informationVITEK VTM-TLM191 VTM-TLM240
VTM-TLM191 VTM-TLM240 19 & 24 Professional LED Monitors with HDMI, VGA, and Looping BNC VITEK FEATURES 19 & 24 Wide Screen LED Display Panel HDMI, VGA, and Looping BNC Composite Video Inputs & Stereo Audio
More informationUser s Guide L192WS. LCD Computer Monitor
User s Guide L192WS LCD Computer Monitor Make sure to read the Important Precautions before using this product. Keep the User's Guide(CD) in an accessible place for furture reference. Have the model and
More informationUser Guide. 20 Widescreen LED Monitor NS-20EM50A13
User Guide 20 Widescreen LED Monitor NS-20EM50A13 Contents Introduction.....................................................1 Safety Precautions...............................................1 WARNINGS:......................................................
More information22" Touchscreen LED Monitor USER'S GUIDE
22" Touchscreen LED Monitor USER'S GUIDE Content Operation Instructions...1 Unpacking Instructions...2 Safety Precautions...2 Front View of the Product...3 Rear View of the Product...4 Quick Installation...5
More informationHP EliteDisplay LED Backlit Monitors. User Guide
HP EliteDisplay LED Backlit Monitors User Guide 2013 Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. The only warranties for HP
More informationVectorVGA Tempest User Manual
VectorVGA Tempest User Manual 2 Notice Regarding This Product WARNING! To install this product you should: Be familiar with safe handling procedures for electronic components. Be able to use hand tools
More informationWinmate Communication INC.
20.1 Military Grade Display Model: R20L100-RKA2ML User s Manual Winmate Communication INC. May, 2011 1 IMPORTANT SAFETY INSTRUCTIONS Please read these instructions carefully before using the product and
More informationUSER MANUAL Full HD Widescreen LED Monitor L236VA
USER MANUAL 23.6 Full HD Widescreen LED Monitor L236VA TABLE OF CONTENTS 1 Getting Started 2 Control Panel/ Back Panel 3 On Screen Display 4 Technical Specs 5 Care & Maintenance 6 Troubleshooting 7 Safety
More informationPXL2470MW LED LCD Monitor
PXL2470MW LED LCD Monitor USER'S GUIDE www.planar.com Content Operation Instructions...1 Unpacking Instructions...2 Safety Precautions...2 Package Overview...3 First Setup...4 Front View of the Product...5
More informationUser Guide. Single-Link DVI Active Cable Extender. DVI-7171c
User Guide Single-Link DVI Active Cable Extender DVI-7171c TABLE OF CONTENTS SECTION PAGE PRODUCT SAFETY...1 PRODUCT LIABILITY...1 1.0 INTRODUCTION...2 2.0 SPECIFICATIONS...3 3.0 PACKAGE CONTENTS...4 4.0
More informationL1750B L1950B. User s Guide
User s Guide L1750B L1950B Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the product
More informationIntroduction...2. Features...2 Safety Precautions...2. Installation...4
PE1900 Contents Introduction...2 Features...2 Safety Precautions...2 Installation...4 Unpacking the Display...4 Locations and Functions of Controls...4 Connections...5 Using Your Display...7 Turning the
More informationUSER MANUAL Full HD Widescreen LED Monitor L215ADS
USER MANUAL 21.5 Full HD Widescreen LED Monitor L215ADS TABLE OF CONTENTS 1 Getting Started 2 Control Panel/ Back Panel 3 On Screen Display 4 Technical Specs 5 Care & Maintenance 6 Troubleshooting 7 Safety
More informationUSER MANUAL Full HD Widescreen LED Monitor L215IPS
USER MANUAL 21.5 Full HD Widescreen LED Monitor L215IPS TABLE OF CONTENTS 1 Getting Started 2 Control Panel/ Back Panel 3 On Screen Display 4 Technical Specs 5 Care & Maintenance 6 Troubleshooting 7 Safety
More informationL194WS L204WS. User s Guide
User s Guide L194WS L204WS Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the product
More informationOperating Manual. Automated Gear. Apollo Design Technology, Inc Fourier Drive Fort Wayne, IN USA
Operating Manual Automated Gear Apollo Design Technology, Inc. 4130 Fourier Drive Fort Wayne, IN 46818 USA PH: +01(260)497-9191 FX: +01(260)497-9192 www.apollodesign.net 11-25-09 5-6 POWERING UP THE RIGHT
More informationSafety Precautions and Maintenance
Safety Precautions and Maintenance 1. Unplug the monitor before cleaning it with a slightly damp cloth. 2. Wiping the screen with a dry cloth is recommendable, and only during the power has been switched
More informationINSTRUCTIONAL MANUAL FOR LCD ZOOM MICROSCOPE
INSTRUCTIONAL MANUAL FOR LCD ZOOM MICROSCOPE ? 8 LCD Screen? 10.4 LCD Screen LCD Zoom Microscope Instruction Manual Please read the Instruction Manual carefully before installation and keep it for future
More informationHope Industrial Systems, Inc. User Manual. 18 Panel Mount Industrial Monitor. Model No. HIS-ML18-xxxC
Hope Industrial Systems, Inc. User Manual 18 Panel Mount Industrial Monitor Model No. HIS-ML18-xxxC 1 TABLE OF CONTENTS Safety and Regulatory Information...3 Using the LCD Display...4 Adjusting the Screen
More informationLecture 14: Computer Peripherals
Lecture 14: Computer Peripherals The last homework and lab for the course will involve using programmable logic to make interesting things happen on a computer monitor should be even more fun than the
More informationUSER MANUAL. 27 Full HD Widescreen LED Monitor L270E
USER MANUAL 27 Full HD Widescreen LED Monitor L270E TABLE OF CONTENTS 1 Getting Started 2 Control Panel/ Back Panel 3 On Screen Display 4 Technical Specs 5 Care & Maintenance 6 Troubleshooting 7 Safety
More information1215L 12 LCD Desktop Touchmonitor
1215L 12 LCD Desktop Touchmonitor Cost-effective LCD touchmonitor for systems integrators and OEMs Elo s 1215L desktop LCD touchmonitor is designed, developed, and built to provide the most cost-effective
More informationCrossLine Generator Operation Manual
WARRANTY MicroImage Video Systems warrants that each CL5400A is free from defects due to faulty materials or improper workmanship for a period of one (1) year. MicroImage Video Systems further warrants
More informationL1900J L1900R L1900E. User s Guide
User s Guide L1900J L1900R L1900E Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on
More informationUser Manual. Model 1365 Video Scaler
User Manual Model 1365 Video Scaler Model 1365 PC/HD Video Converter Table Of Contents 1.0 Introduction........................3 2.0 Specifications....................... 4 3.0 Checking Package Contents................5
More informationDisplays Open Frame Monitor Model Number: AND-TFT-150Bxx
Displays 15.0 Open Frame Monitor Model Number: AND-TFT-150Bxx The AND-TFT-150Bxx 15.0 Open Frame Monitor series are rugged, high performance Industrial LCD Monitors, designed for commercial and industrial
More informationModel Camera System (CCTV) User Manual
Model 4330 Camera System (CCTV) User Manual ETS-Lindgren L.P. reserves the right to make changes to any product described herein in order to improve function, design, or for any other reason. Nothing contained
More information12.1 Inch CGA EGA VGA SVGA LCD Panel - ID #492
12.1 Inch CGA EGA VGA SVGA LCD Panel - ID #492 Operation Manual Introduction This monitor is an open frame LCD Panel monitor. It features the VESA plug & play system which allows the monitor to automatically
More informationMarine LCD Display MV-1504/1704/1904/2104
Marine LCD Display MV-1504/1704/1904/2104 Operating Manual (04-0-13122013) St. Petersburg 2013 v.0.0 Table of Contents 1. GENERAL INFORMATION...4 2. DELIVERY SET...4 3. SPECIFICATIONS...5 4. MOUNTING AND
More informationapple Service Source Apple Studio Display 17" LCD (ADC) Updated 6 Decenber Apple Computer, Inc. All rights reserved.
apple Service Source Apple Studio Display 17" LCD (ADC) Updated 6 Decenber 2004 2003 Apple Computer, Inc. All rights reserved. apple Service Source Take Apart Apple Studio Display 17" LCD (ADC) 2003 Apple
More informationL1753T L1953T L1733TR L1933TR L1753TR L1953TR L1753TX L1953TX
User s Guide L1753T L1953T L1733TR L1933TR L1753TR L1953TR L1753TX L1953TX Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture
More informationPSM-003. Micro Polarization Controller/Scrambler. User Guide
PSM-003 Micro Polarization Controller/Scrambler User Guide Version: 1.0 Date: August 23, 2012 General Photonics, Incorporated is located in Chino California. For more information visit the company's website
More informationInstallation Manual SaVi Note Underwater LED Light
Installation Manual SaVi Note Underwater LED Light Model Numbers SAVI-NOTE7, SAVI-NOTE0 Table of Contents Safety Precautions...2 SaVi Note Install Instructions...3- M Instructions...- Warnings READ AND
More informationUser s Guide W1941S Important Precautions
User s Guide W1941S Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and
More information28 & 32 & 40 & 55 & 65 & 84-INCH TFT-LCD 4K MONITOR
28 & 32 & 40 & 55 & 65 & 84-INCH TFT-LCD 4K MONITOR INSTRUCTION MANUAL Please read this manual thoroughly before use, and keep it handy for future reference. TABLE OF CONTENTS 1, General information...
More informationDell D3218HN. User s Guide. Regulatory model: D3218HNo
Dell D3218HN User s Guide Regulatory model: D3218HNo Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates
More informationHope Industrial Systems, Inc. User Manual. 17 Panel Mount Industrial Monitor Revision A. Model Numbers: HIS-ML17- _ A
Hope Industrial Systems, Inc. User Manual 17 Panel Mount Industrial Monitor Revision A Model Numbers: HIS-ML17- _ A TABLE OF CONTENTS Safety and Regulation Information... 3 Factory Preset Timing... 4 Control
More informationVGA Extender LR EXT-VGA-141LR. User s Manual
VGA Extender LR EXT-VGA-141LR User s Manual ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru
More informationCOMPOSITE VIDEO (BNC) TO VGA VIDEO FORMAT CONVERTER AND SCALER AT-RGB110
User Manual COMPOSITE VIDEO (BNC) TO VGA VIDEO FORMAT CONVERTER AND SCALER AT-RGB110 TABLE OF CONTENTS 1. Introduction... 2 2. Package Contents... 2 3. Features... 2 4. Specification... 2 5. Panel Description...
More informationDUAL/QUAD DISPLAY CONTROLLER Operation Manual
DUAL/QUAD DISPLAY CONTROLLER Operation Manual Model PXD524 MicroImage Video Systems division of World Video Sales Co., Inc PO Box 331 Boyertown, PA 19512 Phone 610-754-6800 Fax 610-754-9766 sales@mivs.com
More informationUSER MANUAL. 27" 2K QHD LED Monitor L27HAS2K
USER MANUAL 27" 2K QHD LED Monitor L27HAS2K TABLE OF CONTENTS 1 Getting Started 2 Control Panel/ Back Panel 3 On Screen Display 4 Technical Specs 5 Troubleshooting 6 Safety Info & FCC warning 1 GETTING
More informationLM/TM-30xx, 31xx Series LCD Monitor User s Manual Rev. A0
LM/TM-30xx, 31xx Series LCD Monitor User s Manual Rev. A0 FCC NOTICE This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions
More informationSK2002DA SIDEKICKER 1-IN, 2-OUT VGA-UXGA DISTRIBUTION AMPLIFIER CABLE USER S GUIDE DISTRIBUTION AMPLIFIERS
MANUAL PART NUMBER: 400-0152-001 PRODUCT REVISION: 0 SK2002DA SIDEKICKER 1-IN, 2-OUT VGA-UXGA DISTRIBUTION AMPLIFIER CABLE USER S GUIDE TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS...2 GENERAL...2
More informationinstruction manual x-y indicator model 620D
instruction manual x-y indicator model 620D s/n boulder, colorado WARNING This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction
More informationElectronic M.O.P Card. Instruction Manual Model D
Electronic M.O.P Card Instruction Manual Model D10341-000 Table of Contents 1. General Description................................................................ 1 2. Specifications.....................................................................
More informationSCALE & WEIGHT DISPLAYS
The MICRO SERIES SCALE & WEIGHT DISPLAYS LARGE DIGIT MODELS Mighty-5S DPM MODELS Micro-S & Mighty-1S Mighty-1S Micro-S ELECTRO-NUMERICS, INC. Introduction The Electro-Numerics family of Digital Panel Meters
More informationwww.greenelectricalsupply.com MaxLite 6 & 8 Commercial Downlight Retrofit General Safety Information To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts,
More informationPIX/2 Operation Manual
Contents Description... Page 3 PIX/2 variations... Page 3 Choosing the Correct Cameras... Page 4 PIX/2 Operation Manual Video Split Screen and Fade Controller Models PX101EX PX101M1 PX101XC PX201EX Unpacking...
More informationDLP200M 2 Relay Module for Heating and Cooling Plants
Product Sheet TH6.24 Thermostat Type DLP200M DLP200M 2 Relay Module for Heating and Cooling Plants The DLP 200 M is a relay module for activation of loads (namely thermal actuators or circulators) in wireless
More informationACUBRITE 23 SS. Manual. Stainless Steel Chassis 23" LCD Display. Content
ACUBRITE 23 SS Stainless Steel Chassis 23" LCD Display Manual Introduction... 2 Hardware Installation... 2 The Display Timing... 5 The Display Outline Dimensions... 6 The Display Controls... 7 The Screen
More informationUser s Manual. Digital Media Converter Package Part #: DL-HDCAT-WP
User s Manual Digital Media Converter Package Part #: DL-HDCAT-WP TABLE OF CONTENTS 1-1 Table of Contents 1-2 Welcome and Safety Notes 1-3 Product Description and General Specifications 1-4 Environmental
More informationDCL9AW. User Manual. English
DCL9AW User Manual English PRECAUTIONS Information for users applicable in European Union countries 1 Information for users applicable in United States of America 1 Installation 1 Power connection 1 Maintenance
More informationUser Guide. HDMI Active Cable Extender. DVI-7370c
User Guide HDMI Active Cable Extender DVI-7370c TABLE OF CONTENTS SECTION PAGE PRODUCT SAFETY...1 PRODUCT LIABILITY STATEMENT........................ 1 1.0 INTRODUCTION...2 2.0 SPECIFICATIONS...3 3.0 PACKAGE
More informationI.Safety Prevention Measures
I.Safety Prevention Measures Please always place this device on a stable surface; otherwise, it may fall and be damaged. The altitude and the tropical environment the adapter fits depend on which adapter
More informationNewScope-7A Operating Manual
2016 SIMMCONN Labs, LLC All rights reserved NewScope-7A Operating Manual Preliminary May 13, 2017 NewScope-7A Operating Manual 1 Introduction... 3 1.1 Kit compatibility... 3 2 Initial Inspection... 3 3
More informationapple Service Source Apple Cinema HD Display 23" LCD (ADC) 11 April Apple Computer, Inc. All rights reserved.
apple Service Source Apple Cinema HD Display 23" LCD (ADC) 11 April 2003 2003 Apple Computer, Inc. All rights reserved. apple Service Source Take Apart Apple Cinema HD Display 23" LCD (ADC) 2003 Apple
More informationSV-LCD50. Installation and User Guide. Thin-Film Transistor (TFT) Liquid Crystal Display (LCD) Color Rear Vision Monitor. Version 1.
SV-LCD50 Installation and User Guide Thin-Film Transistor (TFT) Liquid Crystal Display (LCD) Color Rear Vision Monitor Version 1.00 August 2004 SV-LCD50 Installation and User Guide TFT LCD Color Rear Vision
More informationOWNER S MANUAL LCD MONITOR ENGLISH. Please read this manual carefully before operating your set and retain it for future reference.
ENGLISH OWNER S MANUAL LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LCD MONITOR MODEL ME20CR www.lg.com Important Precautions This unit has
More information10.4" LCD Monitor with Aluminum Front Bezel YPM1040PHB
SPECIFICATION FOR APPROVAL M0DEL: 10.4" LCD Monitor with Aluminum Front Bezel YPM1040PHB BASE MODEL Customer's Confirmation Approved by: Reviewed by: Prepared by: Supplier's Confirmation Approved by: Reviewed
More informationL1760TQ L1960TQ L1760TG L1960TG L1760TR L1960TR L1960TC
User s Guide L1760TQ L1960TQ L1760TG L1960TG L1760TR L1960TR L1960TC Make sure to read the Important Precautions before using the monitor. Keep the User's Guide(CD) in an accessible place for furture reference.
More informationL1753H L1953H L1753HM L1953HM L1753HR L1953HR
User s Guide L1753H L1953H L1753HM L1953HM L1753HR L1953HR Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference.
More informationLCD MONITOR. quick start guide P2070,P2270,P2370,P2070G,P2270G,P2370G
LCD MONITOR quick start guide P2070,P2270,P2370,P2070G,P2270G,P2370G ii Introduction Package Contents Please make sure the following items are included with your monitor. If any items are missing, contact
More informationVGA Extender LR EXT-VGA-141LR. User s Manual
VGA Extender LR EXT-VGA-141LR User s Manual Congratulations on your purchase of the VGA Extender LR. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer
More informationVarTech Systems Inc.
Solutions for Demanding Applications Industrial Flat Panel Displays VarTech Systems Inc. VT240 DiamondVue/CrystalVue Series 24.0 Flat Panel Series LCD Displays VT240P3 VT240PS3 VT240PHB3 VT240PSHB3 VT240W3
More informationLA1500R USER S GUIDE.
LA1500R USER S GUIDE www.planar.com The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights
More informationIn-Wall Control Mount for ipod Touch
In-Wall Control Mount for ipod Touch INTRODUCTION The Mirage KP-iOS is an in-wall system that allows ipod touch (4th generation) to become a semi-permanent fixture in your wall. The system allows you to
More informationTable of Contents 5.0 WARRANTY. 1.0 Introduction Unpacking 1.2 Repacking and Storage
5.0 WARRANTY ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the original purchaser that this product is of merchantable quality and confirms in kind and quality with the descriptions and specifications
More informationDISTRIBUTION AMPLIFIER
MANUAL PART NUMBER: 400-0045-005 DA1907SX 1-IN, 2-OUT VGA/SVGA/XGA/UXGA DISTRIBUTION AMPLIFIER USER S GUIDE TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS... 2 GENERAL...2 GUIDELINES FOR RACK-MOUNTING...2
More informationDLP600M 6+1 Relay Module for Heating and Cooling Plants
Product Sheet TH6.25 Thermostat Type DLP600M DLP600M 6+1 Relay Module for Heating and Cooling Plants The DLP 600 M is a relay module for activation of loads (namely thermal actuators or circulators) in
More informationK Service Source. Macintosh Color Display
K Service Source Macintosh Color Display K Service Source Specifications Macintosh Color Display Specifications Characteristics - 1 Characteristics Picture Tube 14-in. diagonal (11.5-in. viewable image)
More information26 Inch CGA/EGA/VGA/DVI to WXGA/1080p LCD - ID#703
26 Inch CGA/EGA/VGA/DVI to WXGA/1080p LCD - ID#703 Operation Manual Introduction This monitor is an open frame LCD Panel monitor. It features the VESA plug & play system which allows the monitor to automatically
More informationUser Manual. PC / HD Scaler. with advanced video processing. VGA to Component Video Component Video to VGA VGA to VGA Component to Component
User Manual PC / HD Scaler with advanced video processing VGA to Component Video Component Video to VGA VGA to VGA Component to Component Model 1366 WARNINGS Read these instructions before installing or
More informationChildren cannot always recognize potential hazards properly. This 5.1 system is not designed for operation in a heavy industry environment.
5.1 FLAT PANEL SPEAKER SYSTEM WITH POWERED SUBWOOFER Table of Contents: SAFETY AND SERVICE... 2 Operational Safety... 2 Location... 2 Ambient Temperature... 3 Electromagnetic Compliance... 3 Service...
More informationFPM Series. Industrial Flat Panel Touch-Screen Monitors
FPM Series Industrial Flat Panel Touch-Screen Monitors Features: High at a Low Price Mounting Bezel is Sealed to NEMA 4/12 and IP65 Screen Setup is Handled Through an Easy-To-Use RearMounted Membrane Keypad
More informationModel DT-311J. And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Model DT-311J And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL 1. GENERAL The DT-311J DIGITAL
More informationUSER MANUAL. 28" 4K Ultra HD Monitor L28TN4K
USER MANUAL 28" 4K Ultra HD Monitor L28TN4K TABLE OF CONTENTS 1 Getting Started 2 Control Panel/ Back Panel 3 On Screen Display 4 Technical Specs 5 Care & Maintenance 6 Troubleshooting 7 Safety Info &
More informationUser Manual. Innovative LCD Display Solutions AP-20 Series DP-20 Series OP-20 Series NAP-20 Series
Innovative LCD Display Solutions AP-20 Series DP-20 Series OP-20 Series NAP-20 Series 1. Table of Content 1. Table of Content P.1 2. Introduction 3. Installation A) Overview P.2 B) Features P.2 C) Dimension
More informationTIMETRAX SYNC RF WIRELESS DIGITAL CLOCK Installation Instructions
Installation Instructions OVERVIEW Thank you for choosing a TimeTrax Sync RF Wireless Clock System. The TimeTrax RF Wireless Clock System receives dependable, accurate time from the TimeTrax Sync RF Wireless
More informationFLAT DISPLAY TECHNOLOGY
15.0 Open Frame Monitor Model Number: LOF1506xx This product is RoHS compliant SPEC No.: SAS-1008002 Version: 0.0 Issue Date: September 6, 2010 1. Introduction: 1.1 About the Product The LOF1506xx 15.0
More informationHope Industrial Systems, Inc. User Manual. 19 Universal Mount Industrial Monitor. Model No. HIS-WL19- A
Hope Industrial Systems, Inc. User Manual 19 Universal Mount Industrial Monitor Model No. HIS-WL19- A 1 TABLE OF CONTENTS Safety and Regulatory Information... 3 Using the LCD Display... 4 Adjusting the
More information