TELEP~HONE. l I. wesrem Electric

Size: px
Start display at page:

Download "TELEP~HONE. l I. wesrem Electric"

Transcription

1 TELEP~HONE EM l wesrem Electric

2 Copyright, 955 W estem Electric Company, ncorporated \

3 Table of Contents General Description ~ ~ ~ ~~ ~~ ~~ ~ ~ ~ ~ ~ ~ ~ ~ ~~ ~ ~ ~~ ~ ~ ~~ ~ ~ ~~ ~ ~ ~~ ~ ~ ~. ~ ~~ ~ ~ ~~ ~ ~ ~~ ~ ~ ~~~~ ~ ~ ~ ~ ~ ~ ~ ~~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~~~ ~ ~ ~~~ ~~~ ~ ~ ~~~~ ~~ ~~~~~ Page Station Apparatus Backboard Bracket Buzzer ~~~~ ~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -~---~~~~~~~~~~-~ Condenser ~~~~ ~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~ Connecting Blocks ~ ~ ~~~~~~~~~~~~ ~~~ Covers~~~~ ~ ~~-~~~~~~~~~~~~~~ Fuses ~~~ ~~ ~~~~-~~~~~~ ~~~~~~~~~~~ Telephone Sets ~~~~~ ~~~~~~~~-~~~~~~ ~~~~~~~~~~ Cord & Cable Connections~ ~~~~~~~~-~~~~ 9, ~~~~~~~~~~~~~~~~ 8,9,22 ~ ~~~~~~~~~ 25 ~~~~~~~~~~~~~ 3 22,23 Common Equipment Cabinets ~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~ ~-~~~~~~~-~~~ ~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~ 8 ndividual Feature Key Telephone Units~~~~ ~~ ~~ ~ ~~~~ 4 Multi~feature Key Telephone Units ~ ~~~~~~~~~~ ~ 4 Ringing Arrangements ~~~~~~~~~~~~~~~~~~~~~~~~ ~ ~~~~~~~~~~~~~~~~ 6,24 Power Supply ~ ~~~~~~~~~~~~~~~~~~~~~~~~ 24 Operation Line Circuits ~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~ ~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~ Holding ~~~~~~~~~ Wink ~ ~~~~ ~~~~~~~~~ ~ ntercommunication~ Manual~ Dial ~~~~ Audible Signal ~~ ~ ~~~~~~~~~~~~~~~~~~~~~~~~~-~~~~ ~ ~ ~ ~~~~~~~~ ~ Hypothetical nstallations ~~~~~~~ ~~~~~~~~~~~~~~~ ~~~-~- ~~~ ~ ~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~ nterconnections Between Units ~~ ~~~~ ~~-~ ~~-~-~~~ ~ ~ ~~ ~ ~ ~~ ~ ~ ~ ~ ~ ~~ ~ ~~~--~~~ ~~ ~ ~ ~ ~~~ ~-~ ~~ ~~~ ~ -~ ~~~~~ ~-~~ ~ ~~ ~~ ~~ ~-~~ ~ ~ ~ 3 \

4 .. Uleslern Electric lal Key Telephone System General Description The lal Key Telephone System is a switching sy:;tem designed to provide a method of signaling cu~tomers stations on one or more lines from a common battery Central Office or PBX without the assistance of an attendant or operator. The lal Key Telephone System is a revision of the la Key Telephone System incorporating all the features available in the la System and introducing the wink and dial intercommunicating features. The cabinet type units of the la System are replaced by new cabinet type units with 3 instead of 5 relays per circuit, the relays being of a different type requiring less mainknance. The lal System permits the subscriber to utilize the following features: a. Answer and originate calls on from one to six central office, PBX, intercommunicating or private lines. b. Hold calls on from one to five central office or PBX Lines. c. Answer and originate calls on ringdown tie lines and automatic tie lines between stations of Key Telephone Systems. d. Answer and originate calls on lines to distant individual station telephone sets. e. Answer and originate calls on manual or dial intercommunicating lines between stations of a lal Key Telephone System. Any single operating feature described above requires the assignment of one key of the multi hutton key telephone sets associated with the lal System. The multi-button sets have either four or six buttons and accordingly the features provided with one lal System are limited to combinations of either four or less or six or less depending upon the types of telephone sets used. The combination furnished by a given set may be varied to some extent by making suitable changes in the connection of the spade tipped leads in the sets as, for example, to convert a pick up key to a signaling key in those sets arranged for such conversion. Some codes of telephone sets are equipped with an exclusion key which permits manual cut off of any other station or group of stations associated with a line appearing at several stations. Table l on the following page indicates the telephone set codes and feature combinations availablt for USt~ with the lal System. Circuit Figures l to 4 noted in Table l illustrate the differences in wirin: of the various sets. t should be noted as stated in information note 30 that manual sets can he obtained only by conversion of dial sets. l

5 CRCUT NOTE 5: 0. PROVDE THE KEV TELEPHONE SET N ACCORDANCE WTH REQUREMENTS AS NDCATED N THE FOLLOWNG TABLE- THE CORD CONDUCTOR COLORS ARE SHOWN UNDER THE DESGNATON Of THE TERMNALS N THE SET, EXCEPT WHERE "DO" APPEARS WHCH NDCATES THAT THE SPADE TP Of THE CONDUCTOR S TAPED AND DRESSED UNDER THE TERMNAL PLATE Of THE KEY. ~- ~ , ,----~ ~ ~ r ~~ r~~~"' ~~~~ FEATURES PROVDED FOR CODNG TO LNE TO LNE 2 TO LNE 3 TO LNE 4 TO LNE 5 TO LNE 6 SGNALNG ST:J~.~N RNGER TO EXCLUDED ~~;o6~ LAMP LEADS OR SGNALNG OR SGNALNG OR SGNALNG OR SGNALNG CKTS..AM" LEADS STATONS ";,;,r' --STATON CONTROL KEY SGNAL f---~-~ ,------, :::ba"'lc-r:ho-:::l-,d+-.---r--rh-c:o:-l-::dt--r' HOLD HOLD OLD HOLC l P! -:::},. ARRANGEMENT EXCLLAMPSS KT SET CODE CORD KEY RNGTP OR OR RNGTP BAL OR RNG TrP BAL AOR RNG TP BAL AORRNG TP BALAOR RNG TP AOR SG.LEADS :R~ BUSY R B RNOJ'-P BALHOLCR.,TFL~E~A:; L~E L~E L:E L~EL~, H HOLD P PrCKUP S SGNAL KEY SEE BUSY FG SEE NOTE 30 GOOE CODE A A A ~- ~ SG SG SG SG ps CONVERTBLE PCKUP SGNAL NOTE LAMP : f--:: - -- <><~<,NATON OF TERMNALS ON KEY ANO LAMP TERMNAL STRPS EXCEPT AS OTHERWS. E:-'!S.!.T~A.'.T. E~D-'---,--,--,--r-,--,--r---r.,.--,--r---,...,-,-~,----,,---j C CUTOFF TURNBUTTON) 30 DAL.. ANUAL R T 8 H 2R 2Ti DO" 2H 3R 3T l DD" 3H 4R 4T DD" 4H 5R 5T DD" 5H, 6R 6T 6H S SOR2sj SG L2(0NNO.CL R::~RTHR ET EB ~E_H_ CR CT LG ~--P~-Po_Po s4iisilw s4obaw D4D A R G v BK BL w er-r BR GBR YBR:_eKj_BR BLBR-w Y BLY-wf ~ e ;==-~==== 'r ~- - f--- - t ~ --- -t- -- t ~ -- -c ~-~~====~=~~-~-~-JT+--~-2~~s~~~s~s~w~s~~~B~A~w*---J.-~D~~~~-~3~.---+-hR~~G~~Y~t~a~K~~B~L~~w~e~R~-~R~B~R~~~~~~~~~BLB~w G~ ~BL~w-- --~--e-- s~ ~BK s~l ~w Ho Po PoPO f----t--.! " ~------' _-- 5eee \ i-----~g=cp~o~p"'o"' =Po"'2!n"=Po"'s~---!---.f.---J 3 s~;:b~ ~~4A~t ~~_ll~~~3j~~bbc R G ~ :~ :~C..~~~~~ ~~~;~~R-BK~~:R~W R-G R=~~ R-BL -_-- f---+- ~~ ~~ ~=~-=-!;~y:: = ~ --c---~;~-kj--s---bl+s---w+s---6-r+-f----i H() Po Po Po Po Po ---f---r-r---~=- 564BB\;s648A'wl---- ' o2b_a_::i:~ 8 _ 9 A +--+f--"r'--+_g,+y BK _B_l,_ ' BR--R~~~ sii:yer BK BR:el."BFM ~-~:'(_~BK ~:BL R-w G:Y~e'K"G-BLC..--t-- :~ Y~Bl~~ --- f--_::: --f---- s-vfs::'sk~_:_bl,_ii:-_w S-BR BR f-~~"'h=io~p=io."=p~oi==p~oi==p~0~ 5 ~0~~'-i--f-~J+--- -_-_-++-_-r_l- -o-5-5':64"_lc:tjbv\.w'f5'!'6:::4c"'-a'.":w+--- t---~~5_a- 3 t--_ 58 _ l-r-t-_g--t- Y-t!lK B'= W BR R,!!f!.:G BR Y BR BK BR--BL BR-W R-G R Y R-BK R BL ---- e-- _ - -G: BL ~ -~--- ~BL y;,v - j _ S-Y S BK S-BL S W+S'- _,_B_R ~ [ H0 P0 P0 P0 s0 s 0 v s64dow s64daw D25A 3 5B9 e: R G v BK a L w er-r er-g sr-y er BK BR-BL sr-w~ ~ ~ t R BL G BL ig-w Y-llL v-w ~ s-y s-ek s-bl s-w ~ ',_, ':_ l,_,, '," [ Ho Po Po P6 P6 P~ j v.; v 2 s6sssw s6sbaw --t--d-3_4_a_ _3-+_!5_B_9_a R---t-G-+--', ", " w " ~';;;:; "'""'":""_.,',,',:;, ',_;~,.,:;-~, -oc C--.~: l"'~ ~ '~",'~'-R+e R+--- f.-~~;;p;;o;;;p;:o;;;p;:o;;;p;:b;;;p;'6;;;;:p;';6~--i-.j ;f---.j~+-.j--+-3-f-5-6-5a_bv:: 565AAW D34A-3 589C R G. Y BK BL W BR G BR Y BR-6K BR W R G R Y R Bl R W G Y G Bl G W Y BK R 3K C BK BR BL Y BL Y-'N~K-3L BK W BL W S ~- Y S BK S BL S W S BR BR BR F ~-'-H_o_P_O_p_O_p_O_p_~ C~-~-.j-~-.j+-.J-4 -Y_-."B_K_~C-B-Li -W~j-B-R~---R LB~R- - GLB~R- ~~~,.W~4- -4-~5-6-5E_B_W" 5~6-5~E-A~W-:-----~ -~D~3~--A~-~3-:~-5-8_9_F--:--:~R-. G~:-- oc ~~ ~: ~- ~ ':"_~-~-~ ~~,--~-~- ~ ~- L '--L..-...L L _ c=:::) A CRCLE AROUND A COLOR ABOVf NDCATES A CORD CONDUCTOR DO NDCATES CONDUCTORS THAT ARE TAPED _L J....L r L J._j.! W_H_C_H_S_N_O_T_R_cE_O_U_R_E_D_F_O_R_U_S E N THS SET, AND STORED UNDER THE TERMNAL PLATE OF THE KEY J NFORMATON NOTES: 30. FOR MANUAL SERVCE REPLACE THE DAL OF THE CORRE SPONDNG DAL SET (E.G.-540BB) WTH A 958 APPARATUS BLANK AND TRANSFER THE GREEN KEY LEAD FROM TER MNAL "F" TO TERMNAL "RR" ON THE NETWORK TO OB TAN THE MANUAL SET (E.G.-540BA) PROVDE "M" WRNG WHEN THE BUZZER S TO OPERATE ON 60 CYCLE AC, AND PROVDE "N" WRNG WHEN THE BUZZER S TO OPERATE ON DC All CONVERTBLE KEY POSTONS ARE ARRANGED N THE SHOP AS PCKUP POSTONS. TO CONVERT A KEY POSTON FROM PCKUP (LOCKNG) TO SGNALNG (NON-LOCKNG). REMOVE THE SCREW DET All P-2A892 ENTRELY FROM THE PLUNGER AT THE KEY POSTON TO BE CONVERTED. MAKE THE NECESSARY CONNECTON CHANGES AS SHOWN N TABLE C OF THE FGURE NVOLVED. TO RECONVERT A KEY POSTON TO LOCKNG, NSERT A SCREW DETAL P-2A WHEN USNG THE ARRANGEMENT FOR A COMMON SG NALNG KEY FOR TWO OR THREE, PRVATE AND NTERCOM MUNCATNG LNES AS PROVDED FOR N FG. 2, THE SXTH KEY S CONVERTED TO NON-LOCKNG AND S USED AS THE SGNALNG KEY. THE SGNALNG S DRECTED TO THE "S" OR "S " LEAD OF THE 2nd 3rd OR 4th LNE, AS REQURED, THROUGH THE CROSS CONNECTONS SHOWN N TABLE C FOR FG. 2. THE AUTOMATC CUTOFF FEATURE OF THE A KEY TELEPHONE SYSTEM CANNOT BE USED ON A LNE CON NECTED TO THE COMMON SGNALNG KEY TO PROVDE FOR A STATON BUSY LAMP FOR THOSE SETS WHERE SPECFC PROVSON FOR THS FEATURE S MADE (SEE TABLE NOTE 0} THE NECESSARY CONNECTON CHANGES SHOULD BE MADE AS SHOWN N TABLE A OF THE PROPER CRCUT FGURE. FOR THE A KEY TELEPHONE SYSTEM T S NECESSARY, N ADDTON, TO PROVDE A N9 DODE (G.E. CO. OR EQUV.) AND A MW CORD (OR EQUV ALENT) AND CONNECT THEM AS SHOWN N FGURE, WTH THE DODE CLOSE ENOUGH TO THE TERMNALS TO PRE VENT T TOUCHNG THE CAN OF THE 425B NETWORK. SEE ALSO CRCUT DRAWNG, SD , FOR STATON BUSY SGNAL PROVDE "Y" WRNG FOR METALLC RETURN. (METALLC RETURN SHALL ALWAYS BE PROVDED WHEN THE BATTERY S NOT LOCATED N THE SAME BLDG. AS THE KEY TELE PHONE SYSTEM OR WHEN T S LOCATED N THE SAME BLDG. AND rt S CHARGED OVER METALLC RETURN FEED ERS. METALLC RETURN SHALL ALSO BE USED ON A-C SUPPLY). PROVDE "Z" WRNG FOR CABLE SHEATH RETURN (CABLE SHEATH RETURN SHALL ONLY BE USED WHEN THE BATTERY S LOCALLY GROUNDED AND LOCATED N THE SAME BLDG. AS KEY TELEPHONE SYSTEM.) 30i. SETS EQUPPED WTH CUTOFF KEY PER FGURE 4 ARE WRED N THE SHOP WTH THE G-W AND R-W LEADS FROM THE CUTOFF KEY CONNECTED TO TERMNALS "2T" AND "2R" RESPECTVELY. AS SHOWN N TABLE B FOR THS FGURE, THESE LEADS MAY BE CONNECTED BY THE NSTALLER TO OTHER "R" AND 'T' TERMNALS TO CUT OFF EXTENSON STATONS ON LNES OTHER THAN 2. WTH THE A KEY TELEPHONE SYSTEM THE "A" LEAD SHOWN N FG. 4 CON NECTNG TO THE EXTERNAL CONNECTNG BLOCK FOR LNE 2 MUST ALSO BE CONNECTED TO THE CORRESPOND NG LNE. 30L THE RNGER SHOULD BE CONNECTED WTHOUT CON DENSER FOR PRVATE LNE, COMMON OR NTERCOMMUN CATNG LNE SGNALS EXCEPT WHERE LOCAL NSTRUC TONS DRECT OTHERWSE. 30~. THE "R" AND "RR" TERMNALS N THE TABLES A & B OF EACH FGURE ARE ON THE TERMNAL STRP UNLESS OTHERWSE SPECFED. 3 '. THE LAMPS ARE NOT REGULARLY FURNSHED AS PART OF THE CODED SET. 3. BLOCKNG RNG P2A858 CAN BE USED TO MAKE A HOLD, PCKUP OR SGNAL KEY NOPERATVE. CONNECTON OF N9 DODE FOR USE WTH STATON BUSY LAMP A KEY TEL, SYSTEM SEE NOTE 30~ 4258 NETWORK TOTERM.NORM SEE TABLE A OF FGUPE NVOLVED "' (/) TO SWTCH *CONNECTONS PROVDED WTH SPADE TPS TABLE \ 3

6 TO LNE AND SGNALNG CRCUTS DR TO EXCLUSON K!YS OR CUTOFF KEYS AT OTHER STATONS 7D DAL TO LNE &SG CKT. TO LNE AND ( AUO. SG. CONTROL l.ea)g SGNALNG C KT TO ST LNE TO 2ND LNl TO 3RD LNE TO 4TH LNE TO 5TH LNE TO LNE AND SGNALNG CKT. < \ \ \ \ --;-"\ ii: 4: \ ii ' 4: < 4: ;;; iii a:... 0 a: 0 «a:... CD a:... CD a: a:... 0 a:: a: a:... a: a: a: a: a: ~! ~/ f SEE NOTE 302 C4A RNGER J L f!..._ _j 425 B NETWORK SEE NOTE 30 OFF&.. NORMAL CA L_ HAND SET ft ( v PUL~r/ w w \ R w..l_w BL ~ A* K* QL. QG QL2 ~~F c *.. F ~ s-c - *./... s-w RR.l r -- \ T ~ ~J J_ ~ ;sj f'l-.. '---~.. \. S-R f" S-BK 9" c CN B R * * *,... * SWTCH 5-BR "' " " :0:[/ i; :.:; ; 0 :r! ; ; ; rl/ t! :.:; / ; ; rij " \. ~; ~L( ; l-c~~i~~~~c- ( ( } ( l ) l ), ) ~ J BLOCK a:,....j CD lt i:i X..J X..J..J J 3,',.. " " ;a ~ ~ a:,.. X J >- " '.!: &: '',.. 0 CD 3:,.. CD CD 3: a: &: a: a: a: CD ttl 0 a: a: a: a: c.j " " <) a: " " TERMNAL STRP ON KEY,@, A r: =='+ - >-, 7 TYPE BUZZER SSEr.ABLY NO l(~h ' ON 44A BRACKET -,,,, S-R T *./\.' f R RR s RT )---< B N R -'-~rr-~-~ BK A -i JJF' ~D L * * ** * * - {----' L fi C BK -o---'-' _,,..,,.. ~ HOLD PROVDED ONLY AS SHOWN N NOTE 0 -r t--- -f >--=---- ~ ~ * * )-()M T H R ZT ZH 2R 3T 3H /3RU 4T ~H BK * R * ' ""'~ 5T SH 5R ~ 5 5 SG n S '2s sci - ~~ - c.~ "'"+--- ~ - '+,! l = = => => 2 f---< - L ST PCKUP KEY 2ND PCKU) KEY 3RD PCKUP KEY 4TH PCKUP KEY 5TH PCKUP KEY ONE TWO! SGNALNG SGNALNG! KEY KfYS!! i \ \ ( ( \ \ ~ ~ ~ ~ ~ LG a: 0 a: LAMP STRP * * * * * * X J CD,.. ttl ~ CD d) "' "' "' "' j CORD CONDUCTORS CORD CONDUCTORS THESE LEADS ARE TAPED AND STORED UNDER TERMNAL STRPS TABLE A OF FG. A-A SYSTEM CONVERSON CONNECTONS AND SWitCH LEADS (SEE NOTE 309) KEY TEL SYSTEM OF KEY KEY AND SWTCH LEAD. S-W S-G S-Y y Y- BK la B B N R A B N R M N TABLE B OF FG.! RNGER CONNECTON (SEE NOTE 309) SET RNGER USED AS LNE RNGER ON ANY LNE SET RNGER USED AS PRVATE LNE RNGER WTH OR SET RNGER OR CONDENSER BUZZER USED FOR A COMMON SGNAL OR WTHOUT OTHER USE (5'EE NOTE CONDENSER 308) * * T OR R LEAD OF LNE NVOLVED RNGER OR BUZZER LEADS S-R S BK R A A K RT RR A A RT RR * NDCATES CONNECTONS NSDE SET PROVDED WTH SPADE TPS. TO LNE AND SGNAL CKT OR TO LAMP LEADS N OTHER l l r FGURE l Key and Telephone Circuit Arranged for Pickup, Holding, Lamps and Signaling No Convertible Keys 5

7 l TO STATON BUSY LAMP CRCUT ~ TO EXCLUDED STATONS TO LNE AND SGNALNG CRCUTS OR TOE XCLUSON KEYS OR CUTOFF KEYS AT OTHER STATONS (WHEN (()NNECTEO TO AN NTERCOMMVNCAT NG Ll N E Cl RCVT WTH CODE SGNALNG CONNECT THE "S"OR "s" LEAD TO THE ASSOCATED LEAD N THE NTERCOMMUNCATNG CODE SGNALNG CRCUT.) rto-tst LNE TO 2ND LNE TO 3RD LNE TO 4TH LNE TO 5TH L;E\ TABLE A OF FG 2 la -AlSYs'fEMCONVE RSO N STATON BUS:CY-"-:Scci::G:-:N--:A-:-L--::-C-::0:-:N-:-Nc:E:-::C-::T:c-0::--::N-::5--, r----c_onnecton OF HOLD KEY AND SWTCH Lf AOS(SEE NOfE 309) ~~[ HOLD KEY a SWTCH-~~~ M W SYS. S-W S-G S-Y Y Y BK C_O_R_D---t---,-o---t NO STATON la 8 B N R M '-- BUSY LAMP A B N R M N WTH STATON la SG L2 + N R M BUSY LAMP A B L2+ R M N G+TONSEENOTE305!'_T_ER~f<4.!AL_()!~.- :!WOR~ ' PU 7 D DAL SEE NOTE ~0 w w 6A HANDSET J R G * RR * r jijlf\, y,...-+ ~ r'"o,._- (~_nr7~b~k r ~ ~ ~ -~ S R f EXCLUSON KEY PROVDED ONLY AS SHOWN N NOTE 0 BR-R ~ HOLD LAMf"cSTRP - ST PCKUP KEY Z NO PCKUP KEY 3 RD PCKUP KEY 4TH PiCKUP KEY 5TH PCK lip KEY ON 4 BUTTON S"TS ONLY OP SG KEY OR SG.KEY OR SG.KEY PROVDED ~N C:NVERT~=E-E~AB~~ C-A~O NOTE 30\ :J BUTTON SET ONLY 7 t--t-~ ~----j -----' R r-t-lg: t-,5 '--tr*-4*~-----+[*-c * * : f:c*:-' "'.J 0::,_. /) /) ' "'. "' a: /) ) ~ c"'"c-=rd CONDUCTORS _ ~ :_:_:::' =:-:::::::--::::-:= =-==~l=~---' "' EXTERNAL CONNECTNG~LOCK /:,_ ~!-,!? t SEE \\_ ---::-... -_J; \' '/ \~=--.../_/ \ v Tc fv\ fc ~ ~"" '.J.tPv.J' rv/v\ ' _.J_fPv.J~ "" t;, ~~ ~ ~fv \V _ ~~\V~- \V ~} 0 2._;~ ~t~~ TO CABL' \TO ST LNE TO ZND LNE TO 3RD LNE TO 4TH LNE TO 5TH ~ SHEAo~ TO LNE AND SGNALNG CRCUT OR TO LAMP LEADS N OTHER SETS, TABLE B OF FG.2 RNGER AND EXCLUSON KEY CONNECTONS(SEcNOTE309J RNGER OR ~X"Ll'~lr XEY B~fAEOR,, ~~ t ;, '. i S R S BK R G- ifi::-yi~;y.:v,j:,~ ----;,S-;:E;;T--,-;-Wc;-H:c-E;;-N:::-;U:-:S::-;E::-;Oo;-:;A-;S;-;:;B;:R-;;O;-;G;:;E;:;D::--t=-f-C--f-il.,.-.!-"lnl~"r--r-~f- --;-- RNGER RNGER ON ANY LNE A K T R or auzur WHEN us Eo As WTH ---r --r-- Nor TO BE PRVATE LNE OR COND. A t<: f CUT OFF N COMMON S G. 0 R!WTHOUT -t-i RT RR SfT FOSRE~TN~\~~g~ COND "t;v!aa c WHEN USED AS BRDGED - "* -:,.;-;,.:+---t----t SET RNGER RNGER ON ANY LNE A JK ET ER T R EH EB ~~ ~~l~5~ WHEN USED AS WTH A K OFF BY PRVATE LN~ OR COND. ET ER RT RR EH EB EXCLUSON ~g~moot~i~\~~~!wthout A A ~- SEE NOTE 308 GOND LNE EXCLUSON TABLE C OF FG.2 PCKUP SGNALNG CONVERSON CONVERT FROM LOCKNG TO NON-LOCKNG OR VCE-VERSA (SEE NOTE 303 AND CHANGE L[ADS AS FOLLOWS: NO. OF SG. NO. OF PRVATE NO. OF KEYS AND NTER- KEY LEADS PCKUP CONVERTED COMMUNCATNG KEYS FROMP.U. LNES WTH COMMON Y-BR BR S-BR BK-BR KEYS SG. KEY 4 3 BUTTONr-~---~---f S ET$ MM M X 6 ~ 4 M M M SG_ BUTTON M M SG X SET M X SG X 4 2 M X 5H SG 4 3 X X!H SG * NDCATES CONNECTONS N~DE SET PROVDED WTH SPADE TPS. FGURE 2 Key and Telephone Circuit Arranged for Exclusion, Pickup, Holding, Lamps and Signaling with ndividual Signaling Keys or on Private and ntercommunicating Lines with Common Signaling Key (See Note 304) 7

8

9 !700\AL ~-~W SEE NOTE NORMAL L--~ )B~L=+--*~-<FY'y~--. to Ll4!l TO,,_ TO EXTENSON RNGER, LSTENNG N SG CKT STA TO LNE a SGNA~ CRCUTS OR TO EXCLUSON KEYS OR CUTOFF LNE CKT,CUTOFF STATOS,OR Tl 6 Rl ~ _ TABLE A OF Fl(; 4 (AUO SG BUSY < HYS AT OTHER STATONS TO LNE 8 SG CKT (AUX. HOLDNG CKT.) r A-A SYSTEM CONV(R'>ON- STATON BUSY-SlG-ALCONECTfONS - c~l~~~l Lt:t T~:'Axr~~~~ED ~ s~~~~~~kt ;-:;:; STLNE J.o ln(une TO 3RO LNE TO 4TH LNE TOS~~N~K~ ~~c~$~t~~: ~~~ASJ~i6~~~~6~~~~~ CONNECT lon OF! HOLD KEY AND SWXtfl::i_LEADS (SEFE ' t\' '"'f'p' "'"'" ""' "\ ~-----, ::;t ----~ , --:;:- < L. _,.-:\ _ L? ~---,~~- -~ ;:; "\ KT~YL HOLD KEY8tS\fCH LEADS MW ~O:o-,_ "'o: ~ "'_ o- m "':;:r - o:,_ en :5 ; ~ ~ ~ ~ ~ co cr cr,_ ro = ;;: "' ::0 0 ~ ""~,_ ----~'}, '"" l/ - - [; v r ' ; ;. ; l! ~v ; ;~ ~ 0 z~ ~T.lTON _f<_ B JL rt- R M_ - -- p -f----- <r >- ~ r 8USYLAMP A 8 R M N - U) wht STATON _A_ SG- _Lz_ -_-~~~-- R-,_M _ ~ - ~ tr""----ex:~::a~o:oo::t~~~c-k--~-'j:.f-----e:=;t::=;t=;t:j-'--l~' ~~.== ) { -~Q.hr::;U ~~!~ Ml{P Oil ~:~T~~l_K_~- ~-- _::_-----c_n'--=====+-=-~----' ~- ;;! ~ ~' j.- -lo>-----lo- <9 >- ~ cr! 3: :.::.J _J~ Q)lV~~ ~ ~ <!)~aj! "' '!._:. ;.. ;f; i;;.;: U> cr "' >- m i! -~ f~f-- _ :;;-+--:lj-4--:;;+ -~+---"'-+--- "' ~ T_H_E_S_E-LEAD_S_A_R_E-TA-P-ED '' f STOREO UNOER TERM STRP EXCEPT AS COVERED N TABLE * C4A B FOOT NOTE RNGER -l---, l r ----f--. ;t!, i t=*'-----:c --- ~ J--#fr l l f2'- " ~ _4_T +--4=-H+4_R:. :. SG: x=-t-+- 9X..:.R,.-c:..T+.::.c:.:JR A~~ K 30 \~/ ~ GA HANOSET Vi w R A> BK G *NDCATE> CONNECTONS * RR OL,f'_T_ ~~~_li EB '":! R ~- M T H 2r -+2=-H-f~2_R +3_T +3_H+3:..R_ ~.t:*~ ~=~ ~~~~f*~~~~ ~~~~~~;*~"'*:+f::..j~-~f: ~f: -="l'~"~~ ~~-~ ::~:~:K:l=-- :-~~-;!:'_ \ ~- ~~ "~~:~~(. ~;; - \[:~ ' "TL...-lr------~ EXCLUSON KEY w ~ l...!!_tt=t.;_r::::::=t:::::::::::!utj s.-_r ~--~ l-q---'--.]_ c GN NSDE SET PROVDED WTH SPADE TPS. B * '-' a: ',..- d ~ HOLD ~ )--, s_bk J..:Co---.L.U y S-BR SWTCH -----f ;, 0:: "' (/')~~~ ----t--~ ST PCKUP KEY f , '- -- r--t NO PCKUP KEY 3RD. PCKUP KEY 4TH. PCKUP KEY OR SG KEY CONVERTBLE SEE TABLE C a NOTE 303 U) U) ' - L. CUTOFF <EY ~t_ ~...4-! r J "'..J _j m >- m _.;,+-_.,_ -- ~---~! U) LAMP STRP- ';~L[G:jl =:t: - =::::;~2r:=======:lt~3 ;:;;:;~f~l'l CORO CONOUCTORS - EXTERNAL CONN BLOCK rl--t L--f'r----l '\-- r-(!rj0 -( (,) ~~0'-+..J ~0--.-JJ~, f/..--j fj~p..,-j /-~l-----~( SEE NOTE306l\!\\ jj\ ~ j3~~' '- ----' ~ '---~!----_:..:. ; \ ~ \... C : ; TO CABLE ~ST LNE _0 2ND LNE TO 3RD LNE TO 4TH. LiNE; SHEATH TO LNE G. CKTS.OR TO L ~p LEADS OTHER SETS TABLE B OF FG 4 NO~OS') :--- ~ RtNG(R_,_EXC"i,0QN_- t:<~y -~CUTOFF ~EY CONNECTONS(SEENOTE 30 RNGER OR EXCLUSON CUTOFF BUZZER KEY KEY f-----,_j,ead LEADS LEADS - - S-R sfu R G-Y R Y BK-v.BR-R G-W R-W WHEN USED AS :... *" SET BRDGED RNGER A K T R [ RNGER Q.f:.~~-NO.,ET , t--+-- OR BUZZER WHEN USED WTH A K NOT TO BE e,~nkv~~ COND. CUT OFF N ~JG OR FOR Wf:-llcT::-H-:-cOc-U--cT RT RR SET OTHER USE! COND A A (SEE NOTE f--.-~-- ~~::;E:-;;D!-A~S:::--+-t-f--if-f--f f-+--~--l / SET RNGER BROGED RNGER A K ET ER T** R"" E H EB ( OR BUZZER ~NY LNE T~N ~~T X"sH~~c-:V.:.UA-~ST':::EE:CDT---W-T-H-+-A---4-K+---+-t----f--l ~ EXCLUSON LNE OR COM. COND KEY SG OR FOR J---4 ET ER RT RR EH EB OTHER USE WTHOUT A A f <se~o~re cono ~----- ~~~~~~-U~S~E~D~A~S~--r r-+---~~--~-+-, *--* BRDGED RNGER A K CT CR T R ()J\ AN'f LNE WHEN USED AS BOG. LNE RNGER \ PLACE OF EXTERNAL 6~TB~~~~~ ~fg~~~~n~~rey;_j~~n A TO BE CUT CUTOFF KEY S OFF BY OPERATED 0 lf!e 0r X"sH~~~~iH with A K LNE OR COM COND SG OR FOR CT FR OTHER USE WTHOUT ( SE~O~~TE COND A A T ** R ** RT RR LNE EXCLUSON OR CUTOFF EXCLUSON ON LNE OR NOT USED =..:..:::...:,.-,-=T--r~R~-~~H--r-B~----r~ EXCLUSON ON OTHER la KEY TEL SYSTEM T"" R*" H"* 8 t THAN LNE A KEY TEL SYSTEM T** R"" H"" EB CUTOFF ON TP 8 RNG OF ANY LNE CUTOFF OF HEAD RECEVER USED AS A Ll STEN lng N SET * * OF THE LNE NVOLVED t REMOVE THE YELLOW CORD CONDUCTOR FROM TERMNAL 8 TAPE a CONNECT THE BALANCE LEAD CORD CONDUCTOR OF THE LNE NVOLVED TO TERMNAL 8 t TERMNALS ON NETWORK rable C OF FG 4 PCKUP-SGNALNG CONVERSON CONVERT KEY FROM LOCKNG TO NON- LOCKNG OR VCE VERSA (SEE NOTE 303) a CONNECT S-BR LEAD AS FOLLOWS. CONNECT 5-BR LEAD TO 4 PCKUP KEYS 3 PCKUP KEYS SiGNALNG KEY SG "' a FGURE 4 Key and Telephone Circuit Arranged for Cutoff, Exclusion Pickup, Holding, Lamps and Signaling l

10 Station Apparatus Key Telephone Sets arc combined telephone sets which include in a single housing the switching keys, line and busy lamps if desired, subscriber set apparatus, ringer and the additional cord conduc tors required for keys and lamps. Where more than one line terminates in a set the ringer may be connected to any one of the lines, ringers in adjacent sets or externally mounted ringers being used for the balance of the lines. f desired, the set ringers may also be used as an audible signal common to a group of lines. This feature is described in more detail on page 2 of this bulletin. The keys of the set serve to switch the talking circuit to any one line. On sets having 4 or 6 button keys the keys are equipped with a device that prohibits two keys from becoming locked when depressed simul taneously. Common Equipment When line and signaling equipment for an installation is required it is provided in the form of Key Telephone Units (K.T.U.). These are small panel type units approximately 7" high varying in wtdth from 2-Y.-:" to 9;.4" wide. Two rows of key telephone units can be mounted in an apparatus cabinet consisting of a l6a Apparatus Mounting and a ll7a W Cover. The 200DW and 200EW Key Telephone Units consist of such an apparatus cabinet equipped for 3 or 4 central office or PBX Lines respectively in which line, lamp flashing, incoming common signaling and incoming line lamp time out circuits are assembled and wired. One lamp flashing and time out circuit will provide the requirements for 5 line circuits when a wink signal is provided or 6 line circuits without wink. f 6 lines with wink are required an additional 209A Unit must be installed. Other key telephone units may be added to the units provided in the 200DW and 200EW Key T~lephone Units depending upon the operating features desired in a particular installation. t is sometimes desirable to provide the apparatus cabinet separately to be equipped with individual feature units. The following table lists the Key Telephone Units available for use with the lal Key Telephone System and indicates the number of each required per line, per station, per group of lines, etc. 3

11 NDVDUAL FEATURE KEY TELEPHONE UNTS Feature Reqd. Fuse Mounting Panel Central Office or PBX Line Circuit Automatic Tie Line Circuit Ringdown Tie Line Circuit Station Line Circuit Dial Selective ntercom Line Ckt. Signal Ckt. for Flashing Line Lamps Lamp Flashing & ncoming Signal Time Out Circuit Hold Lamp Wink Ckt. Cent. Off. or PBX Line Circuit Manual ntercom Signal Ckt. Ringing Lamp Ckt. Common Audible Signal Lamp Resistance Ckt. for D.C. Lamp Power Supply Battery Feed Noise Suppression Condenser Automatic Cut off Circuit Cut Through & Control Ckt. for Automatic Cut off lntercomm. Line Battery Feed Ckt. K.T.U.Code 20B 202B 203A 204A 205A 207A 208A 209A 20A 23A 3A * lla * l6a 22 type * 23A 26B 29A * 3A # Reqd. See Desc. l Per C.O. or PBX line l Per Auto. Tie Line (see description) l Per Ringdown Tie Line l Per Station Line l Per 9 Station ntercom Line l Per 3 ntercom Stations l Per 5 or 6 lines (see description) l Per 5 Lines l Per Line l Per group for code signaling l Per System l Per System l Per 2 Lamps per 3 Lines or 6 Lamps per line l Per Line l Per Line See desc. l Per ntercom Line * These features included in multifeature 2A Key Tel. Unit noted below. Panel Size 6H" X 2;i\" 7" X 3fi" 7" x 3/z" 7" X 3f%" 7" X 3fi".7" X 5H" 7" X 3/z" 7" X 4ft" 7" x 2o/s" 7" X 4if' see desc. see desc; see desc. see desc. see desc. see desc. -see desc. see desc. Description See Para. A B c D E F G H J K L M N p Q R R s MULTFEATURE KEY TELEPHONE UNTS Comm. Equip. Unit 2llA l Per System 7" X 3fi" 3 Cent. Off. or PBX lines with 22A l Per 3 Lines 7" X 9%" lamp flashing & time out ckt. 3 Cent. Off. or PBX lines with 200DW l Per 3 Lines see desc. lamp flashing & time out ckt. 4 Cent. Off. or PBX lines with 200EW l Per 4 Lines see desc. lamp flashing & time out ckt. T u v v 4

12 DESCRPTON OF KEY TELEPHONE UNTS A. The 20B unit is a single panel fuse mounting for 7 fuses and 6 ground terminals with fuse terminals wired to an associated terminal panel. This unit is required where battery supply to the key telephone system is obtained from a source not always attended by a maintenance man for replacement of fw,es. Set> paragraph on fusing in POWER SUPPLY section of this bulletin. B. The 202B is a single panel unit on which the apparatus for one Central Office or PBX Line circuit is mounted and wired to an associated terminal panel with soldered terminations on the wired Hide and screw type terminals for connections outside the unit. This unit is used to answer and originate calls on lines to a Central Office or PBX. A holding feature is provided which permits the suhrcriher to apply a holding bridge across a line by depressing a hold key associated with the telephone set and to pick up the line again after having obtained desired information or conversed on any other line associated with the system. C. The 203A is a single panel unit on which the apparatus for one Automatic Tie Line is mounted and wired to an associated terminal panel with soldered terminations on the wired side and with screw type terminals for connections outside the unit. This unit is used when it is desired to signal automatically and talk on a designated tie line by removing the telephone set handset from its mounting and depressing the key associated with the tie line. No additional signaling features such as auxiliary signaling keys or lamps are required. An automatic tie line unit is also required at the distant end of the line. No hold feature is available with this circuit. D. The 204A is a single panel unit on which the apparatus for one ringdown tie line circuit is mounted and wired to an associated terminal panel with soldered terminations on the wired side and screw type terminals for connections outside the unit. This unit is used when it is desired to signal manually and talk on a designated line. Signaling is accomplished by removing the telephone set handset from its mounting, depressing the key associated with the tie line and operating the signaling key associated with the tie line. The manual signaling feature permits the calling party to make use of code signaling when more than one station is connected at the distant end. A ringdown tie line circuit is required at the distant end of the tie line. No hold feature is available with this circuit. E. The 205A is a single panel unit on which the apparatus for one Station line circuit is mounted and wired to an associated panel with soldered terminations on the wired side and screw type terminals for connections outside the unit. This unit is used when it is desired to signal and talk on a line to a distant key telephone station. When this unit is used the station at the distant end need only pick up the Handset and the station at the equipment end is automatically signalled. The station at the equipment end must signal with a button. F. The 207 A is a single panel unit on which the apparatus for one dial intercomm line having access to nine stations is mounted and wired to an associated panel with soldered terminations on the wired side and screw type terminals for connections outside the unit. This unit is used for selectively dialing nine stations associated with the same intercomm line, any station of the nine being able to dial any other station. When a station key associated with this circuit is depressed and the handset is removed from its associated telephone set single digit dialing causes a spurt of ringing of one to three seconds duration at the called station. No hold feature is available with this circuit. G. The 208A is a single panel unit on which the apparatus for providing a flashing lamp feature at three stations of a dial intercomm line is mounted and wired to an associated panel with soldered terminations on the wired side and screw type terminals for connection outside the unit. This unit is used to provide ~ flashing lamp feature at the called station of a dial intercomm line. Without this flashing feature the lamp at a called station would be lighted steady indicating only that the dial intercomm line was in use. 5

13 H. The 209A is a single panel unit on which the apparatus for the lamp flashing and incoming signal time out circuit is mounted and wired to an associated terminal panel with soldered termination!! on the wired side and screw type terminals for connections outside the unit. This unit is used when flashing lamps and a time out circuit are desired at the stations of a lal Key Telephone System, the flashing lamp indicating an unanswered condition on the line associated with the lamp and the time out circuit removing all indications of an incoming call on the line if the line is unanswered after approximately 30 seconds. f a wink signal is used for indicating a held condition this unit can provide the flashing and time out feature for five lines. Wheu the wink signal is not used the unit provides flashing and time out for 6 lines. This unit or its equivalent is required for all central office or PBX Lines. J. The 2lOA is a single panel unit on which the apparatus for a wink signal feature is mounted and wired to an associat<.>d terminal panel with soldered terminations on the wired side and screw type terminals for connection outside the unit. f a wink signal feature is not used a held line appears the same as a busy line having its line lamp illuminated steady. With the wink feature the lamp of a hdd line is off three hundredths of a second during each second of operation giving the impression of a wink. The wink is easily distinguishable from the flashing line lamp signal of an incoming call which flashes the line lamp off one half second and on one half second during each record of operation. K. The 23A is a panel type unit on which is mounted the apparatus and wiring for one central office or PBX Line Circuit for use as a single line common to stations of both lal and la Key Telephone systems. Apparatus is wired to associated terminal panels with soldered terminations on the wired side and screw type terminals for connections outside the unit. L. The 3A is an angle bracket type unit on which a signaling relay Js mounted and wired to a terminal panel with soldered terminations on the wired side and screw type terminals for connections outside the unit. This unit is not designed to mount directly on the l5a or 6A Apparatus Mountings and when required must be mounted on a bracket, P-37B204, which is arranged for mounting on the 5A or l6a Mounting". The 3A Key Telephone Unit is used when both code signaling and selective signaling are desired. No auxiliary equipm~nt is required for buzzer signaling when all of the buzzers are operated either selectively or on a code ringing basis but when some of the signaling keys are used for selective buzzer operation and others are employed to operate the same buzzers on a code signaling basis. the.3a Key Telephone Unit or its equivalent will he required. M. The lla is an anglt> bracket type unit on which a resistance lamp is mounted and wired to a terminal panel with soldered terminations on the wired side and screw type terminals for connections outside the unit. The resistance lamp is ust>d to prevent ringing current exceeding safe limits and to improve the performance of small ringing generators under maximum load. The resistance lamps are used to insure ringing current to other apparatus working on same supply if ringing grounds or cro,;ses occur beyond lamps of circuit in trouble. This unit. like the 3A KTU must be mounted on hinged bracket 37B:204 when it is desired to mnu nt the unit on the SA or l6a Apparatus Mountings with panel type key telephone units. N. The l6a is an angip bracket type unit on which the apparatus for an audible signal control circuit is mounted and wired to a terminal panel with soldered terminations on the wired side and screw type terminals for conneetions outside the unit. This unit. like the 3A KTC must be mounted on hinged bracket 37B204 when it is desired to mount the unit on the l5a or l6a Apparatus Mountings with panel type key telephone units. The audible signal control unit is used when two independent common audible signals are required with one or more line circuits common to two lines or common to separate groups of lines. P. The 22 Type Key Telephone Units are of the angle bracket type with resistances mounted and wired to a terminal panel with soldered terminations on the wired side and screw type terminals for connections out-;ide the unit. These units are required when DC power or t8 volt batterv over 6

14 feeders is used to illuminate lamps. The following table indicates the lettered code of 22 type units that should be used for various conditions: Type of Battery Supply FOR SA LAMPS Local battery 9 cells l i-20v 9 Cell building battery l6-22v 0 Cell building battery l8-24v ll Cell building battery 20-26V 2::: Cell regulated cent. off. battery 4.5-SOV FOR K2 LAMPS 23 Cell regulated cent. off. battery 47..'i-SOV Type of KTU Req'd. The~C' units like the 3A \:TC must be mounted on bracket P37B204 when it is de~ired to mount the units on lsa or 6A Apparatus Mountings. Q. The 2:3A is an angle bracket type unit on which a condenser i,; mounted and wired to a terminal panel with soldered terminations on the wired side and screw type t<'nninals for connection=outside the unit. The condenser is wired across the key telephone sy,;tt'm battery supply when the source is poorly filtererl or when noise caused by switching opnations in the system is objectionable. This unit, like the 3A KTU must be mounted on bracket. P-:nB20-L when it is desired to mount the unit on 5A or 6A Apparatus Mountings with panel type key telephone units. R. The 26B and 29A are angle bracket type units on which the relays are mounted and wired to terminal panels with ~oldered terminations on the wired ~ide and screw type terminals for connections outside the units. Combinations of the 26B and 29A Key Telephone (Tnits are used to provide automatic cut off of stations associated with an individual line appearing at several stations. Four optional arrangements can be provided as follows: -A 2--A 3-A,j, -~-A station station station station 22F 22:G 22H 22J 22K can cut-off others and can not be cut off. can cut-off others and can be cut-off except during a call. or group of stations cannot cut-oft others and can be cut-off except during a call. cannot cut-off others and can lw cut-off at any time. The Key Telephone Units required to provide the ahove conditions are respectively as follows: -One 26B Key Tel. l nit per line and one 29A Key Tel. Unit per station 2- One 26B Key Tel. Unit per line and one 29A Key Tel. Gnit per station 3 --One 26B and one 29A Key Tel. Unit per line and one 29A Key Tel. Unit per station or groups of stations !\one --This condition applicable only to one of tlw >'lations that can he cut off in accordance with condition~. 2. :3. above. The 26B and 29A Key TC'lephone Units like the 3A KTll must he mounted on a bracke P-37B204 when it is de;irej to mount the units on 5A or 6A Apparatus Mountings with panel type key telephone units. When th(' automatic cut-off feature is required with a dial intercomm line it is provided by furnishing one 26U Kry Tel. l_lnit per line which in conjunction with a 203A Key Telephone l-nit automatically cuts off all other stations on the line and reconnects only the called station to the calling station. S. The ::A is an angle bracket type unit on which a battery feed rela) is mounted and wired to a terminal pand with ~oldered terminations on the wired side and 5CTew type terminals for connec tions outside the unit. Thi~ unit is used to light busy lamps steady at stations on a manual intercomm line. The 3A KTU like the 3A KTU must be mounted on a bracket P-37B20J hen it j,; desired to mount the unit on 5A or 6A Apparatus Mountings with panel type units. 22] 7

15 T. The 2A is a single panel unit on which apparatus for the manual intercomm signaling ckt, the common audible signal control circuit, the ringing lamp circuit, the battery feed noise suppres sion circuit and the intercomm battery feed circuit is mounted and wired to an associated terminal panel with soldered terminations on the wired side and screw type terminals for connections outside the unit. This unit provides all of the features cov ered by paragraphs K, M, P and R. U. The 22A Key Telephone Unit is a single panel unit on which is mounted the apparatus and wiring for three Central Office or PBX Line circuits and flashing and time out circuit apparatus common to the three lines. This common apparatus will accommodate 5 lines. Apparatus is wired to associated terminal panels with soldered terminations on the wired side and screw type terminals for connections outside the unit. V. The 200DW and 200EW Key Telephone Units are packaged units mounted and wired in a cabinet consisting of a l6a Apparatus Mounting and a 7 A W Cover with equipment for 3 or 4 Central Office or PBX Lines respectively. The 200DW unit consists of the 22A Unit mounted in a cabinet. The 200EW unit consists of the 22A unit plus a 202B unit mounted in a cabinet. Adequate space is available in the cabinet for units required to complete a key telephone system in.which additional lines or additional operating features are desired. CABNETS AND MOUNTNG ARRANGEMENTS Cabinets per Figure 5 are available for housing the panel type key telephone units of the 200 series. The 200DW and 200EW Key Telephone Units are assembled units mounted and wired in a cabinet since it is expected that a high percentage of lal Key Telephone System installations will require one of these basic units. Cabinets consisting of a l6a Apparatus Mtg and a 7 A W Cover are part of the 200DW and 200EW Units or can be ordered separately when desired. 6A Apparatns Mounting on Metal Stand ED Groups 2 & 4 6A Apparatus Mounting and 7AW Cover on Metal Stand ED Groups 2 & 4 FGURE 5 8

16 Extension ED G-6 Foot ED C-2 FGURE 6 Cover ED G-4 The assembly of the 6A Apparatus Mounting includes a wood backboard which serves to insulate the cabinet from any surface on which it is mounted. When it is desirable to mount the cabinet on the floor a floor stand, ED Group 2, can be used and where appearance is a factor a cover for the base of the stand, ED Group 4 can be provided. One floor stand foot and cover are shown in Figure 6. One ED Group 2 and 4 is required to provide the two foot assemblies and covers neces3ary to support one cabinet. The 6A apparatus mounting and cover have overall dimensions of 26 ~" x 6-it;" x 9%". The cover has a beige gray wrinkle finish and is furnished with an inner lining of sound absorbent material for noise reduction purposes. The apparatus mounting has a hinged gate assembly affording easy access to the terminal side of mounted apparatus, the gate assembly providing two rows of mounting space each 7" high {see Fig. 7) each row having horizontal space available for any number of key telephone units with a total horizontal requirement of 2 ~" or less. 9

17 co... ' ft. u 200EW Key Telephone Unit with an Additional 202B Key Telephone Unit (Cabinet Cover Removed) FGURE 7 The gate assembly is also arranged for mounting six 2" x 23" apparatus mounting plates which permits a combination of panel type and mounting plate type units to be mounted in the same cabinet. The shorter 9" mounting plates may be mounted in the cabinet by using adapters per P-36B209. Two adapters are required for each plate to be mounted. For small installations of panel type key equipment units a smaller cabinet consisting of a 73A Backboard, a 5A Apparatus Mounting Assembly and ll6a W Cover is available. This cabinet is 6%" high and l3:lv' wide and 9%" deep. The apparatus mounting assembly provides two rows of mount ing space each 7" high, each row having horizontal space available for any number of key telephone units with a total horizontal requirement of lott; inches. Although the cabinet is primarily intended for wall mounting and not arranged for floor support, the floor stand ED Groups 2 and 4 can be used by drilling the cabinet backboard as required. 20

18 Small individual angle bracket type key telephone units such as the 3A, A, 6A, 3A, (Fig. 8) etc. can be mounted on the 5A or 6A apparatus mounting by using a mounting bracket assembly P37B204. Using this assembly three single space or one double space and one single space key telephone units of the angle bracket type can be mounted on the front and rear of the bracket. Extension auxiliary uprights, ED Group 6 can be provided when it is desirable to mount the l0g Power Plant on the same stand with the cabinet. With this arrangement the l0g Power Plant will be located above the equipment cabinet with approximately 2" separating the two units. Should it be desirable to mount the 0G Power Plant on a separate floor stand a metal stand ED Group 3 is used. Three other apparatus cabinets which are available can be used for mounting key telephone units of the angle bracket Fig A Key Telephone Units m-ounted front and rear on P-37B204 Angle Bracket mounting. or mounting plate type.. These cabinets which have a capacity of 4, %/' x 9" Mounting Plates or or 8 mounting plates %" x 23" are available per ED , ED and ED respectively. When it is necessary to mount angle bracket type units in these cabinet bent bars per ED Group for 9" mounting plates or Group 2 for 23" mounting plates are used. The hent bars, furnished in pairs, are designed to occupy the space of one or two 3,4" mounting plates and provide for mounting three single space or double space key telephone units on both front and hack, thereby giving a capacity of six key telephone units per set of bars. The 4-plate cabinet uses bent mounting bars 9" long per ED Group and the and lb-plate cabinets use bent mounting bars 9" or 23" long as required. The and 8 plate cab ind>~ are arranged for 23" mounting plates but each may be equipped with auxiliary framework to p(~rmit the mounting of 9" mounting plates. By using special adapter angle, mounting angles l':r; A502 for 23" spans or P37 A823 for 9" spans, the 200 series Key Telephone Units and the bracket P:7B204 may be mounted in the eleven or 8 plate apparatus cabinets or on relay rack dc~igned for 9" or 23" mounting plates. Two mounting angles are required for each row of panel type units or brackets. STATON SET CONNECTONS i\ ten ltmninal connecting block, 44A, is used to terminate key telephone set cords having more than four conductors. The 44A Connecting Block may be used individually or in a group arrangement of up to four blocks. The No~. lola-4 (vory) or 0A-9 (Brown) covers are used with a single No. 44A Connecting Block and two or three No. 44A Connecting Blocks may be mounted under the No. 0C-4 (vory) or lolc-9 (Brown) covers. The Nos. 68A-4 (vory) or 68A-9 (Brown) Backboards are arranged 2

19 for mounting one No. 44A Connecting Block and the Nos. l68b-4 (vory) or _l68b-9 (Brown) Backboards are arranged for mounting two or three No. 44A Connecting Blocks. The Nos. l68c-4 (vory) or l68c-9 (Brown) Backboards are arranged for mounting four No. 44A Connecting Blocks. One lola Type and one lolc Type Cover are used when four 44A Connecting Blocks are mounted on a l68c Type Backboard. Three No. 44A Connecting Blocks and No. lolc-4 Cover FGURE 9 One No. 44A Connecting Block and No. lola-4 Cover The following table associated with Fig. 0 indicates the terminals on which the various pairs of inside wiring cable and key telephone set cord conductors are terminated on No. 44A Connecting Blocks. The first group of ten conductors is for the fir st connecting block (one nearest butt of cable) and the second, third and fourth groups are for the second, third and fourth connecting blocks respectively. The cord attaches to the last block on the side opposite the side where the cable enters. FGURE lo Four No. 44A Connecting Block~. One Nos. lola and 0C Covers Required 22

20 - TypeD TypeC nside nside Connecting Wiring Wiring Block Block Cable Cable Cord No. Terminals Pairs Pairs Conductors l Blue / Blue Red 2 White White Green 4 Orange) Orange Yellow 5 White White Black 6 Green ) Green Blue 7 White White White -"9'\ Brown) Brown *Brown-Red 0/ White White *Brown-Green,..-3 Slate ) Slate *Brown-Yellow 8 White White *Brown-Black 2 l Blue Blue-White Brown-Blue 2 Red White Brown-White 4 Orange Blue-Orange Red-Green 5 Red White Red-Yellow 6 Green Blue-Green Red-Black 7 Red White Red-Blue 9 Brown Blue-Browjl Red-White 0 Red' White Green-Yell ow 3 Slate Blue-Slate Green-Black 8 Red White Green-Blue -. l Blue Orange-White Green-White 2 Black 'White Yellow-Black 4 Orang'e Orange-Green Yellow-Blue 5 Black White Yellow-White 6 Green Orange-Brown Black-Blue 3 7 Black White Black-White 9 Brown Orange-Slate Blue-White lo Black White Slate 3 Slate Green-White Slate-Red 8 Black White Slate-Green l Blue Green-Brown Slate-Yell ow 2 Yellow White Slate-Black 4 4 Orange Green-Slate Slate-Blue 5 Yellow White None 6 Green Brown-White Slate-White 7 Yellow White None 9 Brown Brown-Slate Slate-Brown 0 Yellow White None 3 Slate Slate-White Brown 8 Yellow White None * Double red, double green, double yellow and double black in cords with rubber insulated conductors. These conductors have ribs to distinguish them from the others in the cord. FGURE loa 23

21 POWER SUPPLY - The relays used in the A Key Telephone System which require a local battery supply are arranged to operate on 4 to 26 volts. Battery for lamp operation may be either 0 volts AC, 4 to 26 volts DC or 48 volts DC. The power supply may be obtained from agy of the following sources: a- direct fe~d over cable pairs from a central office b - direct feed from a PBX or building battery c- a local 0G Power Plant per 8673A List 6 & NP or List 4 & NP providing the following power: LST 6 Supply DC (talk) DC ( Sig.) Voltage Range Resistance Load Range to 20 ohms to 32 ohms Amp AC-60 Cycle 9-ll 0 to 7 ohms ( 36-5A Lamps).4 * AC-60 Cycle to 3 ohms (36-A3 Lamps).4 20 Cycle Ringing **LST 4 Same as above plus 75-0 to 8 high impedance ringers or to 2 high impedance ringers with condensers * * The List 4 power plant is used when a 20 cycle ringing supply is required for private lines or to ring local bell or buzzers. * The 6-20 volt 60 cycle output of the rectifier also can be used for buzzer signaling. When the sources of power listed above are not available the following alternate sources can be used: 24 d- a local storage battery plant per floated over cable pair or charged from a local rectifier. e-a KS57l4 Transformer for operating buzzers on alternating current. f- a 393B Transformer for illuminating key telephone set lamps or indicator lamps on alternating current.

22 Fusing The log Power Plants J-8673A Lists 6 & NP or List 4 & NP are equipped with 2 ampere fuses which eliminate the need for separate fusing when only the 0G power supply is used in a lal Key Telephone System. n eases where a A System obtains battery over cable pair from a central office or from a local building supply separate fusing will be required only where the main battery supply is not attended by a maintenance man for the replacement of fuses. When the central office or local building battery supply is unattended individual circuit fuses for a Al. System should be furnished by providing a 20B Key Telephone Unit when space is available in apparatus cabinet ED or by providing a 2A Key Telephone Unit for mounting in a 05A W Apparatus Box or on mounting plates in the 4, ll or 8 plate cabinets. The 2A Key Telephone Unit is an angle bracket type mounting with space for six fuses and three ground terminals. When used in a 05 Type Apparatus Box the fuse panel shouk be mounted in the top half of the box to facilitate replacement of fuses when required. Line Circuits OPERATON The key telephone sets listed herein provide for picking up central office, PBX, private or intercommunicating lines. ncoming calls on central office PBX or private lines are audibly indicated by the station ringers or by buzzers signaling which line to pick up. The key telephone sets equipped with signal lamps also provide a visual signal indicating which line has an incoming call waiting to he answered by illuminating the key button of the associated line at all stations at which the line appears. The tables of key telephone sets on the previous pages indicate the number of lines and feature combinations available. An incoming call on a line is answered by pressing the key button associated with the audible or visual (or both) signals received and picking up the station handset. An outgoing call is originated by selecting a desired line, pressing the associated key button and picking up the station handset. The line is then ready to place an outgoing call. Should a local power failure occur all types of lines except the Central Office or PBX Lines become inoperative. With central office or PBX lines, however, it is possible during a power failure to make an outgoing call since selection of a line and removal of the station handset permits the line to receive a call regardless of the availability of local power to the key telephone system. f, during a local power failure, the local ringing supply remains operative the common audible signals, if provided, will operate during an incoming call but will follow the incoming ringing on the line rather than locking in as would be the case when power is available to the relays of the system. During a complete local power failure it is possible, on Central Office and PBX lines only, to receive incoming signals only if ringers are bridged across the lines to operate on incoming ringing current. Holding A holding key button is provided on some key telephone sets to enable the subscriber to hold an incoming call while conversing with another person on a separate line or to transfer an incoming call to another station on the same line. When the subscriber desires to hold an incoming call for the purpose of obtaining information over another line, transferring an incoming call, etc., the hold key button is pressed. This causes a holding bridge to be placed across the line and keeps lighted the lamp associated with the line being held so that other stations will know the line is in use. When the subscriber (or the station to which 25

SPEAKERPHONE SYSTEM-3-TYPE 630-TYPE TELEPHONE SETS CONNECTIONS AND MAINTENANCE

SPEAKERPHONE SYSTEM-3-TYPE 630-TYPE TELEPHONE SETS CONNECTIONS AND MAINTENANCE BELL SYSTEM PRACTCES Plant Series SECTON 512-62440 ssue 2, September 170 AT&TCo Standard SPEAKERPHONE SYSTEM-3-TYPE 63TYPE TELEPHONE SETS CONNECTONS AND MANTENANCE 1. GENERAL 1.01 This section covers modification

More information

1A AND l Al KEY TELEPHONE SYSTEM

1A AND l Al KEY TELEPHONE SYSTEM 1 -r. " @ -A 4 ' ht, 1955 Tetbk by Con~pany.A Printed in U. S. k BELL SYSTEM PRACTICES SECTION C53.15t Station Installation and Maia&nmm& Issue 6, bug., 1955 - AT&TCo Standad 1A AND 1Al KEY TELEPHONE SYSTEM

More information

400A, 8, C, AND D TYPE KEY TELEPHONE UNITS IDENTIFICATION, INSTALLATION, CONNECTIONS, AND MAINTENANCE

400A, 8, C, AND D TYPE KEY TELEPHONE UNITS IDENTIFICATION, INSTALLATION, CONNECTIONS, AND MAINTENANCE BELL SYSTEM PRACTCES Plant Series SECTON 51-220-400 ssue 2, September, 1966 AT&TCo Standard 400A,, C, AND D TYPE KEY TELEPHONE UNTS DENTFCATON, NSTALLATON, CONNECTONS, AND MANTENANCE 1. GENERAL 1.01 These

More information

400A, B, C, AND D TYPE KEY TELEPHONE UNITS IDENTIFICATION, INSTALLATION, CONNECTIONS, AND MAINTENANCE

400A, B, C, AND D TYPE KEY TELEPHONE UNITS IDENTIFICATION, INSTALLATION, CONNECTIONS, AND MAINTENANCE ELL SYSTEM PRACTCES Plant Series ssue 2, September, 1966 AT&TCo Standard 400A,, C, AND D TYPE KEY TELEPHONE UNTS DENTFCATON, NSTALLATON, CONNECTONS, AND MANTENANCE J 1. GENERAL 1.01 These key telephone

More information

A. E. CO. TYPE 10A2 KEY TELEPHONE SYSTEM DESCRIPTION AND OPERATION PAGE

A. E. CO. TYPE 10A2 KEY TELEPHONE SYSTEM DESCRIPTION AND OPERATION PAGE GENERAL SYSEM PRACCES ENGNEERNG-PLAN SERES SECON 484-401-100 SSUE 3, JULY, 1966 G&E SANDARD A. E. CO. YPE 10A2 KEY ELEPHONE SYSEM DESCRPON AND OPERAON CONENS PAGE 1. GENERAL 1.01 1. 2. 3. GENERAL......

More information

Introduction and Definitions

Introduction and Definitions 14-1 Introduction and Definitions Supplying a properly equipped private branch exchange to a subscriber offers the telephone company a two-fold advantage. First, it makes a satisfied customer; second,

More information

REFERENCE 2750-TYPE TELEPHONE SETS

REFERENCE 2750-TYPE TELEPHONE SETS BELL SYSTEM PRACTICES Plant Series SECTION 52-77-1 Issue 1, March 197 AT&TCo. Standard REFERENCE 275-TYPE TELEPHONE SETS 2.2 Replaceable set Components are listed in Table A. 2.3 Associated Apparatus or

More information

A Versatile New Intercom System

A Versatile New Intercom System Key, or push-button, telephones have made the telephone station an almost universal tool for everyday communications. The 6A Key Telephone System, recently developed at Bell Laboratories, adds significantly

More information

Conettix D6600/D6100IPv6 Communications Receiver/Gateway Quick Start

Conettix D6600/D6100IPv6 Communications Receiver/Gateway Quick Start Conettx / Communcatons Recever/Gateway Quck Start.0 Parts Lst able : Conettx System Components Qty. Descrpton Conettx Communcatons Recever/Gateway AC power cord Battery cable P660 I/O cable P660 Rack mount

More information

VOICE CONNECTING ARRANGEMENTS RDL AND ROM KS-19522, LIST 1 OR LIST 2 RECORDER COUPLER USED WITH KS-16765, LIST 1 ANNOUNCEMENT SET

VOICE CONNECTING ARRANGEMENTS RDL AND ROM KS-19522, LIST 1 OR LIST 2 RECORDER COUPLER USED WITH KS-16765, LIST 1 ANNOUNCEMENT SET BSP 463-340-111-i02_1972-11.01.jpg Scanned by Frank Harre ll (CowboyFrank) Castle Rock. Colorad o Feb 23,2016 23 :46:54 BELL SYSTEM PRACTCES AT&TCo Standard SECTON 463-340-111 ssue 2, November 1972 VOCE

More information

MASTR II BASE STATION 12/24V POWER SUPPLY 19A149979P1-120 VOLT/60 Hz 19A149979P2-230 VOLT/50 Hz

MASTR II BASE STATION 12/24V POWER SUPPLY 19A149979P1-120 VOLT/60 Hz 19A149979P2-230 VOLT/50 Hz Mobile Communications MASTR II BASE STATION 12/24V POWER SUPPLY 19A149979P1-120 VOLT/60 Hz 19A149979P2-230 VOLT/50 Hz CAUTION THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALI- FIED PERSONNEL ONLY. TO

More information

GATES AMPLIFIERS. Plug -in. Audio. Solid- Statesman Series HARRIS INTERTYPE CORPORATION. Six Premium Quality Transistorized Products

GATES AMPLIFIERS. Plug -in. Audio. Solid- Statesman Series HARRIS INTERTYPE CORPORATION. Six Premium Quality Transistorized Products Six Premium Quality Transistorized Products 6300 Series Solid- Statesman Audio HARRIS INTERTYPE CORPORATION GATES AMPLIFIERS THE GATES M -6337 TELEVISION AUDIO CON- TROL CONSOLE marks a significant advance

More information

TONE COMMANDER SYSTEMS, INC l'oth Ave. N.E., Redmond, WA 980'2, U.s.A Telephone: (206) , Telex:

TONE COMMANDER SYSTEMS, INC l'oth Ave. N.E., Redmond, WA 980'2, U.s.A Telephone: (206) , Telex: TONE COMMANDER SYSTEMS, INC. 4320 l'oth Ave. N.E., Redmond, WA 980'2, U.s.A Telephone: (206) 883-3600, Telex: 32-8055 TONE AND ROTARY DIAL INTERCOM TECHNICAL INSTRUCTION Document #13-100444 REV. E April

More information

INTERFACE TERMINATION JTC USED WITH ATTESTED CUSTOMER-PROVIDED NON-POWERED CONFERENCING DEVICES

INTERFACE TERMINATION JTC USED WITH ATTESTED CUSTOMER-PROVIDED NON-POWERED CONFERENCING DEVICES BSP 463-322-100-101_1973.Q9.01.jpg Scanned by Frank Harrell (CowboyFrank) Castle Rock, Colorado Feb 23, 2016 22:20:12 BELL SYSTEM PRACTICES AT&TCo Standard SECTION 463-322-100 Issue 1, September 1973 INTERFACE

More information

REGO Start&Go USER MANUAL

REGO Start&Go USER MANUAL REGO Start&Go USER MANUAL Version 0 Rev. B of 03/03/16 Page 1 of 15 Introduction The purpose of the manual is to describe all of the steps required to commission and correctly operate the REGO Start&Go

More information

V-136RT 36 STATION ROTARY-TONE INTERCOM

V-136RT 36 STATION ROTARY-TONE INTERCOM VSP-V-136RT Issue 7 V-136RT 36 STATION ROTARY-TONE INTERCOM GENERAL The V-136RT is a single-path dial select microprocessor controlled intercom and page control unit used with a 1A2 key system to provide

More information

SECTION 7 -- CROSS-CONNECT SYSTEMS

SECTION 7 -- CROSS-CONNECT SYSTEMS DETAIL ENGINEERING REQUIREMENTS AT&T March, 2016 Section 7, ATT-TP-76400 Revised NA SECTION 7 -- CROSS-CONNECT SYSTEMS CONTENTS PAGE 1. GENERAL... 7-2 1.1. Introduction... 7-2 1.2. Cable Holes... 7-2 1.3.

More information

NORTHERN~ TELECOM~ Contents. Switching Products. a Northern Electric company. TSO Section 4

NORTHERN~ TELECOM~ Contents. Switching Products. a Northern Electric company. TSO Section 4 Contents NE-3CL Toll Switchboard NE-608A Private Branch Exchange Switchboard NE-23A Operating Room Desk NE-14 Local Test Desk NE-1 Portable Traffic Usage Recorder NE-3B Traffic Usage Recorder Answering

More information

User Guide. Centrex Recording Interface

User Guide. Centrex Recording Interface User Guide Centrex Recording Interface Table of Contents Introduction... 2 The Meridian Business Set... 3 Key Numbering Plan (18 button add-on)... 4 Key Numbering Plan (36 button add-on)... 5 Key Numbering

More information

www. ElectricalPartManuals. com l Basler Electric VOLTAGE REGULATOR FEATURES: CLASS 300 EQUIPMENT AVC63 4 FEATURES AND APPLICATIONS

www. ElectricalPartManuals. com l Basler Electric VOLTAGE REGULATOR FEATURES: CLASS 300 EQUIPMENT AVC63 4 FEATURES AND APPLICATIONS Using enhanced technology, the AVC63-4 voltage regulator is designed for use on 50/60 Hz brushless generators. This encapsulated regulator is economical, small in size, ruggedly constructed, and incorporates

More information

Selection guide siemens.com/sirius-modular-system

Selection guide siemens.com/sirius-modular-system SIRIUS modular system Selection guide siemens.com/sirius-modular-system Everything for the control cabinet: SIRIUS modular system Efficiently combined Advantages at a glance: Load feeders: easy to implement

More information

APPLICATION NOTE # Monitoring DTMF Digits Transmitted by a Phone

APPLICATION NOTE # Monitoring DTMF Digits Transmitted by a Phone APPLICATION NOTE # Product: 930A Communications Test Set 930i Communications Test Set Monitoring DTMF Digits Transmitted by a Phone Introduction This Application Note describes how to configure and connect

More information

RISER AND DISTRIBUTION TERMINALS

RISER AND DISTRIBUTION TERMINALS I BELL SYSTEM PRACTICES AT&TCo Standord SECTION 462-265-211 kue 1, July 1971 WIRING BUILDING RISER AND DISTRIBUTION S 1. CONTENTS PAGE GENERAL........... 1 1.04 All cable pairs entering and leaving these

More information

APPENDIX A Verify All Part Numbers (Partial List of Approved Products)

APPENDIX A Verify All Part Numbers (Partial List of Approved Products) SECTION 16651 APPENDIX A Verify All Part Numbers (Partial List of Approved Products) SYSTIMAX SCS: OVER-VOLTAGE PROTECTION 1. Over-voltage Protection Device, 100-Pair with Enclosure, Product 489ACAI-100,

More information

Master Time Clock MTC Users Manual

Master Time Clock MTC Users Manual Master Time Clock MTC-6000 Users Manual Midwest Time Control Phone (972)987-4408 Toll Free (888)713-0373 FAX (877)720-9291 www.midwest-time.com sales@midwest-time.com TABLE OF CONTENTS TOPIC PAGE GENERAL

More information

) AMANO. ,i CINCINNATI ELECTRONIC TIME RECORDER EX 6000 SERIES

) AMANO. ,i CINCINNATI ELECTRONIC TIME RECORDER EX 6000 SERIES ) AMANO,i CINCINNATI ELECTRONIC TIME RECORDER EX 6000 SERIES CONTENTS External View 1. 1 Specifications 1 Before Programing EX-6000 series 1 2 How To Program EX-6000 series 1 6 Printing Space (Vertical)

More information

Pushbutton Units and Indicator Lights

Pushbutton Units and Indicator Lights Insert labels and insert caps Clear, illuminated and indicator lights can be fitted with insert labels and caps for identification purposes. These labels and caps are made of a semi-transparent molded

More information

VALCOM HANDSFREE TALKBACK PAGING SYSTEM DESIGN/INFORMATION

VALCOM HANDSFREE TALKBACK PAGING SYSTEM DESIGN/INFORMATION VSP-Talkback Paging Issue 14 VALCOM HANDSFREE TALKBACK PAGING SYSTEM DESIGN/INFORMATION INTRODUCTION These instructions provide the basic information required to properly install a Valcom Handsfree Talkback

More information

INSTRUCTION BOOK FOR. Lectern

INSTRUCTION BOOK FOR. Lectern INSTRUCTION BOOK FOR Lectern All Models Connect power supply to 110/120 VAC 3-wire outlet (220/240 VAC models to 220/240 VAC source). Optional Height Adjustment Models with optional reading surface adjustment

More information

video door entry system - installation instructions

video door entry system - installation instructions 4 TRADE 007 AUDIO 008 VIDEO Tel : 0870 00 00 Fax : 0870 00 00 WEB : www.planetsrs.com 8480 oronation Road Park Royal, London NW0 7QJ video door entry system installation instructions IN008v 0008 Getting

More information

SPECIAL SPECIFICATION 2344 TMC Support Equipment

SPECIAL SPECIFICATION 2344 TMC Support Equipment 2004 Specifications CSJ 0912-00-488 SPECIAL SPECIFICATION 2344 TMC Support Equipment 1. Description. Furnish Traffic Management Center (TMC) support equipment in the City of Missouri City TMC location

More information

20 mm Beam Pitch General Purpose Area Sensor. Distance between parts shelf and sensor can be shortened (Enables miniaturization of equipment)

20 mm Beam Pitch General Purpose Area Sensor. Distance between parts shelf and sensor can be shortened (Enables miniaturization of equipment) OTHER SUNX PRODUCTS SERIES 0 mm Beam Pitch General Purpose Area Sensor Diagnosis Self-diagnosis Test input Interference prevention Wide sensing area of 7 m,60 mm with 0 mm beam pitch Refer to p.9l for

More information

Telephony Training Systems

Telephony Training Systems Telephony Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Topic Coverage 6 Features & Benefits 6 List of Available Training Systems

More information

SWS 160. Moment loading. Technical data. M x max Nm M y max Nm. M z max Nm

SWS 160. Moment loading. Technical data. M x max Nm M y max Nm. M z max Nm Moment loadng M x max. 7170 Nm M y max. 7170 Nm M z max. 3800 Nm Ths s the max. sum of all forces and moments (from acceleraton forces and moments, process forces or moments, emergency stop stuatons, etc.)

More information

PRESET TEN ARCHITECTURAL TWO OWNERS MANUAL

PRESET TEN ARCHITECTURAL TWO OWNERS MANUAL PRESET TEN ARCHITECTURAL TWO OWNERS MANUAL model PRE10-A2 Doug Fleenor Design 396 Corbett Canyon Road Arroyo Grande, CA 93420 (805) 481-9599 Software Version 1.0 Manual Revision 12/2/2008 Serial # 08B001

More information

MS2540 Current Loop Receiver with RS485 Communication

MS2540 Current Loop Receiver with RS485 Communication MS2540 Current Loop Receiver with RS485 Communication User Manual Metal Samples Company A Division of Alabama Specialty Products, Inc. 152 Metal Samples Rd., Munford, AL 36268 Phone: (256) 358 4202 Fax:

More information

INTRODUCTION PRODUCT CONCEPT AND DESCRIPTION

INTRODUCTION PRODUCT CONCEPT AND DESCRIPTION 1 INTRODUCTION PRODUCT CONCEPT AND DESCRIPTION The Audio Suite is a mainframe which accepts up to ten modular sections thereby permitting individualized selection of preamplifier features and functions.

More information

Azatrax Model Railroad Track Signal Control - Single Track

Azatrax Model Railroad Track Signal Control - Single Track Installation Guide Azatrax Model Railroad Track Signal Control - Single Track TS2 What it is: The TS2 operates one or two trackside block signals (one in each direction) on one track to simulate the block

More information

Master Time Clock MTC-200 MTC-400 MTC-600. Users Manual

Master Time Clock MTC-200 MTC-400 MTC-600. Users Manual Master Time Clock MTC-200 MTC-400 MTC-600 Users Manual MidWest Time Control, Incorporated P.O. Box 1108 Owasso, Oklahoma 74055 Phone (918)272-9430 FAX (918)272-9441 www.midwest-time.com EMAIL: sales@midwest-time.com

More information

INSTRUCTION BOOK FOR. Special Needs Lecterns

INSTRUCTION BOOK FOR. Special Needs Lecterns INSTRUCTION BOOK FOR Special Needs Lecterns All Models Connect power supply to 110/120 VAC 3-wire outlet (220/240 VAC models to 220/240 VAC source). Digital Clock/Count Down Timer Height Adjustment The

More information

Bulletin 509 Full Voltage

Bulletin 509 Full Voltage Bulletin 509 Full Voltage Example Cat. No. 509 B O D A2E 17 a b c d e f a Bulletin No. Bulletin No. 509 Top-wired starter 509DC Top-wired starter (DC voltage) b NEMA Size T 00 A 0 B 1 C 2 D 3 E 4 F 5 G

More information

Telephony Training Systems

Telephony Training Systems Telephony Training Systems LabVolt Series Datasheet Festo Didactic en 240 V - 50 Hz 04/2018 Table of Contents General Description 2 Topic Coverage 6 Features & Benefits 6 List of Available Training Systems

More information

Amphenol. Amphenol-Tuchel Electronics GmbH. C 112 Series M12 - Connectors

Amphenol. Amphenol-Tuchel Electronics GmbH. C 112 Series M12 - Connectors Amphenol Amphenol-Tuchel Electronics GmbH C 112 Series M12 - Connectors We connect con The company Amphenol-Tuchel Electronics is a worldwide leader in electrical connectors and contacting devices. Our

More information

Cambria County Association for the Blind and Handicapped 175 Industrial Park Road Ebensburg, PA Prepared for: Prepared by:

Cambria County Association for the Blind and Handicapped 175 Industrial Park Road Ebensburg, PA Prepared for: Prepared by: Cable Management in Solar PV Arrays: A Review of Requirements in the National Electrical Code and how CAB Cable Rings and Saddles Meet These Requirements Prepared for: Cambria County Association for the

More information

AES-402 Automatic Digital Audio Switcher/DA/Digital to Analog Converter

AES-402 Automatic Digital Audio Switcher/DA/Digital to Analog Converter Broadcast Devices, Inc. AES-402 Automatic Digital Audio Switcher/DA/Digital to Analog Converter Technical Reference Manual Broadcast Devices, Inc. Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide Web:

More information

Identification - electrical services

Identification - electrical services Identification - electrical services Aesthetic All live phase cable sheathing to be brown coloured and neutral phase cable sheathing to be blue coloured, all labelled L1, L2, L3 & N respectively in accordance

More information

TeleHawk Door entry system

TeleHawk Door entry system Veermount Technology Limited TeleHawk Door entry system INSTALLATION MANUAL (For product supplied after January 1st, 2006) IMPORTANT NOTE. Long term system reliability and low maintenance costs can only

More information

Eddy Current Probe System

Eddy Current Probe System CMSS 785 Eddy Current Probe System API-670 Proximity transducer system, 5 mm and 8 mm Eddy Current Probe System The CMSS 785 system is an eddy current type non-contact displacement/ vibration system, used

More information

Introduction. Accessories. Pan/Tilt Control Panel AW-RP400 NOTE

Introduction. Accessories. Pan/Tilt Control Panel AW-RP400 NOTE Pan/Tilt Control Panel AW-RP400 Introduction This pan/tilt control panel enables up to five AW-PH400 indoor pan/tilt heads to be controlled. By connecting the AW-CB400 remote operation panel or WV-CB700A

More information

SECTION INTERCOMMUNICATIONS AND PROGRAM SYSTEMS

SECTION INTERCOMMUNICATIONS AND PROGRAM SYSTEMS SECTION 27 51 23 SPEC WRITER NOTES: 1. Use this section only for NCA projects. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. Contact Department of Veterans

More information

SINAMICS G130. dv/dt filter plus Voltage Peak Limiter. Operating Instructions 03/2013 SINAMICS

SINAMICS G130. dv/dt filter plus Voltage Peak Limiter. Operating Instructions 03/2013 SINAMICS SINAMICS G130 Operating Instructions 03/2013 SINAMICS s dv/dt filter plus Voltage Peak Limiter Safety information 1 General 2 SINAMICS SINAMICS G130 Operating Instructions Mechanical installation 3 Electrical

More information

Installation. SAPTF33xx-1xx in the Network. Standard Configuration

Installation. SAPTF33xx-1xx in the Network. Standard Configuration SAPTF33xx-1xx in the Network Standard Configuration One Unit A device (SAPTF33xx-100) and one device () are required for the standard configuration. The Unit A device is connected to the while the device

More information

INSTRUCTION BOOK FOR. Lectern

INSTRUCTION BOOK FOR. Lectern INSTRUCTION BOOK FOR Lectern Disclaimer Milestone and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

More information

CR-R880-BL: Indoor/Outdoor Proximity Reader with 10cm (4in) read range

CR-R880-BL: Indoor/Outdoor Proximity Reader with 10cm (4in) read range CR-R880-BL: Indoor/Outdoor Proximity Reader with 10cm (4in) read range Installation Manual Table of Contents Basic Operation...2 CR-R880-BL Block Diagram...2 Technical Specifications...3 Features...4

More information

Switching and Telephone Products KEY TELEPHONE SYSTEM HANDBOOK

Switching and Telephone Products KEY TELEPHONE SYSTEM HANDBOOK Switching and Telephone Products KEY TELEPHONE SYSTEM HANDBOOK HANDBOOK INDEX, PUBLICATION NUMBER CHB 110 CHB 120 - CHB 125 CHB l30 CHB l40., CHB l50 CHB 155 CHB 156 CHB 157 CHB l60. CHB-170 CHB-200 CHB-500

More information

multi-function meters

multi-function meters multi-function meters eclipse 2 eclipse 7 installation and operating manual 1 GENERAL DESCRIPTION 2 INSTALLATION 3 WIRING INFORMATION 4 2 ECLIPSE 2 METERS 2.1 PROGRAMMING THE METER 5 2.2 INFORMATION 6

More information

Fiberglass - Technical Data

Fiberglass - Technical Data - Technical Data Cable Tray Thermal Contraction and Expansion X : Denotes hold-down clamp (anchor) at support. _ : Denotes expansion guide clamp at support. It is important that thermal contraction and

More information

Site Installation Model MP-8433

Site Installation Model MP-8433 Site Installation Model MP- Rev. //0 SCOREBOARD SITE INSTALLATION INSTRUCTIONS CAUTION: All American Scoreboards (AAS) recommends the sign be installed by a licensed contractor, and must meet all local

More information

HighBand 25. TrueNet Category 6 Solutions

HighBand 25. TrueNet Category 6 Solutions HighBand 25 TrueNet Category 6 Solutions The highest performing cross-connect system in the world. A unique high-density solution with superior cable management. ADC KRONE s HighBand 25 cross connect solution

More information

INSTALLATION GUIDE 2.4 Inch TFT Terminal Time Attendance & Access Control

INSTALLATION GUIDE 2.4 Inch TFT Terminal Time Attendance & Access Control STALLATION GUIDE.4 Inch TFT Terminal Time Attendance & Access Control Optional accessories Safety Precautions The following precautions are to keep user s safe and prevent any damage. Please read carefully

More information

Global Water Instrumentation, Inc.

Global Water Instrumentation, Inc. Instrumentation, Inc. 11390 Amalgam Way Gold River, CA 95670 T: 800-876-1172 Int l: (916) 638-3429, F: (916) 638-3270 PRODUCT NAME: 378 TEMPERATURE CONTROLLER - 1 - The model 378 is a high performance

More information

2 Hour Electronic Boost Timer

2 Hour Electronic Boost Timer 2 Hour Electronic Boost Timer Model No. TGBT4 Installation & Operating Instructions 1. General Information These instructions should be read carefully and retained for further reference and maintenance.

More information

2-Port Hub Type 1 2-Port Hub Type 3 Unshielded 2-Port Hub Type 3 Shielded

2-Port Hub Type 1 2-Port Hub Type 3 Unshielded 2-Port Hub Type 3 Shielded Type 1 Type 3 Unshielded Type 3 Shielded SEPTEMBER 1994 LT7000A LT7001A LT7002A 1 2 R I N G Type 1 R I N G 1 2 Type 3 R I N G 1 2 Type 3 CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours,

More information

Highlights: Cables & Adaptors. Stock Cable Assemblies Custom Cable Assemblies Multi-conductor Cables Patch Panels Connector Adaptors

Highlights: Cables & Adaptors. Stock Cable Assemblies Custom Cable Assemblies Multi-conductor Cables Patch Panels Connector Adaptors Cables & Adaptors Highlights: Stock Cable Assemblies Custom Cable Assemblies Multi-conductor Cables Patch Panels Adaptors www.pcb.com 716-684-0001 PCB Piezotronics, Inc. Automotive Sensors Division Common

More information

Passive UTP Transceiver Hub with Integral Camera Power Installation Guide

Passive UTP Transceiver Hub with Integral Camera Power Installation Guide Passive UTP Transceiver Hub with Integral Installation Guide Models Include: HubSat8D - Eight (8) Channels HubSat82D - HubSat8D w/eight (8) HubWayAv Balun/s for s HubSat83D - HubSat8D w/eight (8) HubWayDv

More information

RoHS. Atma-Sphere Music Preamplifier. model P-2 OWNER'S MANUAL. Please study this document carefully before using equipment

RoHS. Atma-Sphere Music Preamplifier. model P-2 OWNER'S MANUAL. Please study this document carefully before using equipment 1742 Selby Av. St. Paul, MN 55104 651 690 2246 atma sphere.com Atma-Sphere Music Preamplifier model P-2 OWNER'S MANUAL Please study this document carefully before using equipment RoHS CONGRATULATIONS!

More information

LAN / NETWORKING PRODUCTS

LAN / NETWORKING PRODUCTS 10.NETWORKING PROD137-152_Layout 1 5/13/15 9:31 AM Page 1 ohm COM 70V 1 0V 4/8 OUT AMPLIFIED ohm COM 70V 1 0V 4/8 OUT AMPLIFIED AUDIO INPUTS Audio R L Audio R L + - + - STEREO MINI 3.5mm STEREO MINI 3.5mm

More information

FOM-1090 FOM-1090 FOM FOM-1090 w/ DB-25 Female FOM-1091 w/ DB-25 Male

FOM-1090 FOM-1090 FOM FOM-1090 w/ DB-25 Female FOM-1091 w/ DB-25 Male Serial Data Communications Synchronous, Asynchronous or Isochronous Signal rates: DC to 20 MHz FOM-1090 w/ DB-25 Female FOM-1091 w/ DB-25 Male Supported Interface Standards TIA-530, TIA-530A TIA-232 TIA-574

More information

Obtained from Omarshauntedtrail.com

Obtained from Omarshauntedtrail.com http://www.cindybob.com/halloween/ledlighting/ledspotlights/ Introduction In our 2005 haunt providing 120V AC power to the various lights and props requiring it became a fairly large problem. Extension

More information

LAUREL ELECTRONICS, INC.

LAUREL ELECTRONICS, INC. LAUREL ELECTRONICS, INC. Laureate Digital Panel Meter for Process, Strain & Potentiometer Follower Signals Features Selectable ±0.2, ±2, ±20, ±200, ±300 & ±600 Vdc voltage ranges Selectable ±2, ±20, ±200

More information

ImproX (TRT) Twin Remote Terminal INSTALLATION MANUAL

ImproX (TRT) Twin Remote Terminal INSTALLATION MANUAL SPECIFICATIONS MODEL NUMBER: XRT910-0-0-GB-XX XRT911-0-0-GB-XX XTT911-0-0-NN-XX IMPROX TRT ImproX (TRT) Twin Remote Terminal INSTALLATION MANUAL Working Environment XRT910-0-0-GB-XX... (Aluminium Extruded

More information

TOKISTAR TOKISTAR LIGHTING

TOKISTAR TOKISTAR LIGHTING L i g hts tr ing s TOKISTAR TOKISTAR LIGHTING Lightstrings T okistar Lightstrings are a system of sockets wired in parallel and permanently attached to flexible, commercial-grade wire. All-weather construction

More information

Basics of building the ROV Rev2

Basics of building the ROV Rev2 Basics of building the ROV Rev2 www.rollette.com/rovrev2 1. Assemble the PVC pipe hull as shown below. All pieces are off the shelf parts. The only parts that need to be cut to length are the 2 pipe. This

More information

1995 Metric CSJ SPECIAL SPECIFICATION ITEM 6031 SINGLE MODE FIBER OPTIC VIDEO TRANSMISSION EQUIPMENT

1995 Metric CSJ SPECIAL SPECIFICATION ITEM 6031 SINGLE MODE FIBER OPTIC VIDEO TRANSMISSION EQUIPMENT 1995 Metric CSJ 0508-01-258 SPECIAL SPECIFICATION ITEM 6031 SINGLE MODE FIBER OPTIC VIDEO TRANSMISSION EQUIPMENT 1.0 Description This Item shall govern for the furnishing and installation of color Single

More information

6A KEY TELEPHONE SYSTEM IDENTIFICATION AND INSTALLATION

6A KEY TELEPHONE SYSTEM IDENTIFICATION AND INSTALLATION BELL SYSTEM PRACTICES Plant Series SECTION 518-4 1 0-1 00 Issue 6, November 1967 AT&TCo Standard 6A KEY TELEPHONE SYSTEM IDENTIFICATION AND INSTALLATION 1. GENERAL (b) Rotary dial station selection. 1.01

More information

SPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment

SPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment 2004 Specifications CSJ 3256-02-079 & 3256-03-082 SPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment 1. Description. Furnish and install Fiber Optic Video Data Transmission Equipment

More information

IL591 SECTION D Rev /2011. Tek-SAFE NC150R Area of Rescue Assistance System. Operation, Installation and Service Manual

IL591 SECTION D Rev /2011. Tek-SAFE NC150R Area of Rescue Assistance System. Operation, Installation and Service Manual IL591 SECTION D Rev. 12-03/2011 Tek-SAFE NC150R Area of Rescue Assistance System Operation, Installation and Service Manual Alpha Communications 42 Central Drive Farmingdale, NY 11735-1202 Phone: (631)

More information

DIN Connectors DIN06 E-03

DIN Connectors DIN06 E-03 DIN Connectors DIN0 E-0 Contents Introduction HOSIDEN DIN connectors are supplied to electronic equipment manufacturers both in Japan and overseas and are very well accepted because of high quality, a

More information

263 Series LED Bargraph Indicator and Controllers

263 Series LED Bargraph Indicator and Controllers 263 Series LED Bargraph Process Control Water Treatment High resolution 51 segment LED Bargraph for easy reading Accuracy 1% Red display Vertical or Horizontal mounting & stackable Connection Diagrams

More information

PREPAX DELUXE INTERCOM SYSTEMS

PREPAX DELUXE INTERCOM SYSTEMS PREPAX DELUXE INTERCOM SYSTEMS Thank you for investing in a PREPAX Deluxe model intercom system. Kindly make sure that the input voltage specifications are maintained and that no external voltage is applied

More information

HYPERLINE UTP/STP Cable Strippers and Cutters

HYPERLINE UTP/STP Cable Strippers and Cutters 198 HYPERLINE UTP/STP Cable Strippers and Cutters UTP/STP Cable Stripper and Cutter, type 110 HT-318 UTP/STP Cable Stripper and Cutter HT-501 Ordering HT-318 HYPERLINE UTP/STP Cable Stripper and Cutter,

More information

Instruction Manual. Series 3000 Model R-165A. Audio/Video IF/RF Relay Panel. CATV Switching and Control

Instruction Manual. Series 3000 Model R-165A. Audio/Video IF/RF Relay Panel. CATV Switching and Control Series 3000 Model R-165A Audio/Video IF/RF Relay Panel Instruction Manual CATV Switching and Control 585-765-2254 fax 585-765-9330 100 Housel Ave. Lyndonville NY 14098 www.monroe-electronics.com Table

More information

Example Transport Engineering Guide (TEG): DSX-1 Rear Cross Connect

Example Transport Engineering Guide (TEG): DSX-1 Rear Cross Connect Example Transport Engineering Guide (TEG): DSX-1 Rear Cross Connect BOTC-TEG-2290 Section Table of Contents Page DS Data Sheet (weight, footprint, power, heat, timing, alarms/rm, DF blocks, CLEI) 2 1 Overview

More information

Weekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N

Weekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N Weekly Timer 1/4 DIN Size Timer Features Prompted Programming and Large LCD Display 24 hours x 7 days programming using just 5 switches 16 program steps and cycle operation Two independent 15 A control

More information

ACT 10 Digital Keypad Operating & Installation Instructions This manual is found at

ACT 10 Digital Keypad Operating & Installation Instructions This manual is found at ACT 10 Digital Keypad Operating & Installation Instructions 18-00001 This manual is found at www.eaglesecuritysolutions.co.uk Installation Notes Always remember to factory default the controller before

More information

Linear flow controls VFC Linear flow controls with actuator IFC

Linear flow controls VFC Linear flow controls with actuator IFC Linear flow controls VFC Linear flow controls with actuator Product brochure GB 3 Edition 01.16 Linear relationship between adjustment angle and flow rate Large control ratio of 25:1 Actuators IC 20 or

More information

User s Manual Model WF100 Extension Cable for EXA100

User s Manual Model WF100 Extension Cable for EXA100 User s Manual Model WF100 Extension Cable for EXA100 1st Edition User s Manual Model WF100 Extension Cable for EXA100 1st Edition Safety Precautions Introduction This instruction manual covers the Extension

More information

Automated Local Loop Test System

Automated Local Loop Test System INSTRUMENTS Automated Local Loop Test System Comprehensive Local Loop Testing for Voice, Data, Fax and Internet Services Two-way Testing of Copper, Wireless, and Hybrid-Fiber Coax Local Loops A whole new

More information

SPECIAL SPECIFICATION 1291 Fiber Optic Video Data Transmission Equipment

SPECIAL SPECIFICATION 1291 Fiber Optic Video Data Transmission Equipment 1993 Specifications CSJ 0500-01-117 SPECIAL SPECIFICATION 1291 Fiber Optic Video Data Transmission Equipment 1. Description. This Item shall govern for the furnishing and installation of Fiber Optic Video

More information

SPECIFICATION SHEET lumencove

SPECIFICATION SHEET lumencove Client: Project name: Order #: Type: Qty: FEATURES AND BENEFITS Physical : Low copper content extruded aluminum housing Available in 1, 2, 3, 4 or sections Electro-statically applied polyester powder coat

More information

TIME SEQUENCE GENERATOR ( GIUSEPPE )

TIME SEQUENCE GENERATOR ( GIUSEPPE ) SLAC-TN-70-10 Boris Bertolucci May 1970 A DIGITAL TIME SEQUENCE GENERATOR ( GIUSEPPE ) Abstract A circuit, which starts at T = 0 with an input pulse and puts out 10 pulses which start at arbitrarily variable

More information

Site Installation Model MP-8424

Site Installation Model MP-8424 Site Installation Model MP- Rev. //0 SCOREBOARD SITE INSTALLATION INSTRUCTIONS CAUTION: All American Scoreboards (AAS) recommends the sign be installed by a licensed contractor, and must meet all local

More information

Bulletin 190 IEC Modular Starter System

Bulletin 190 IEC Modular Starter System Bulletin 90 Table of Contents Selection Guide Description Page Bulletin 90....................................... Accessories....................................... 7 Specifications.....................................

More information

Generator protection relay

Generator protection relay Page 1 Issued: April 1999 Status: New Data subject to change without notice Features Off-the-shelf generator protection relay for small and medium sized power generators Three-phase time overcurrent and

More information

LCS 2 RJ 45 Cat. 6A HD panels and units

LCS 2 RJ 45 Cat. 6A HD panels and units 87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: +33 (0)5 55 06 88 88 Page 0 335 85/86 1. General characteristics....1 2. Presentation...1 3. Positioning...1 4. Technical characteristics...1

More information

Instruction Manual Model # Block Upconverter

Instruction Manual Model # Block Upconverter Instruction Manual Model 2115-278# Block Upconverter August 2018, Rev. A MODEL 2115 UPCONVERTER CROSS TECHNOLOGIES INC. EXT 10MHZ ALARM POWER Data, drawings, and other material contained herein are proprietary

More information

Station-User Guide For Single Line Telephones

Station-User Guide For Single Line Telephones INTRODUCTION Station-User Guide For Single Line Telephones This guide provides instructions on the use of the single-line telephone instruments in the University of Hawaii s SL-1 Telephone System. The

More information

AT&T January, 2012 Revised December, 2018 TABLE OF CONTENTS SECTION 1--INTRODUCTION...1-1

AT&T January, 2012 Revised December, 2018 TABLE OF CONTENTS SECTION 1--INTRODUCTION...1-1 SECTION 1--INTRODUCTION...1-1 1. General...1-1 1.1. Introduction...1-1 1.2. Purpose...1-2 1.3. Application...1-2 1.4. Definitions...1-3 1.5. General Requirements...1-3 1.6. Proprietary Information...1-5

More information

EP A2 (19) (11) EP A2 (12) EUROPEAN PATENT APPLICATION. (43) Date of publication: Bulletin 2012/20

EP A2 (19) (11) EP A2 (12) EUROPEAN PATENT APPLICATION. (43) Date of publication: Bulletin 2012/20 (19) (12) EUROPEAN PATENT APPLICATION (11) EP 2 43 301 A2 (43) Date of publication: 16.0.2012 Bulletin 2012/20 (1) Int Cl.: G02F 1/1337 (2006.01) (21) Application number: 11103.3 (22) Date of filing: 22.02.2011

More information

MILITARY SPECIFICATION SHEET

MILITARY SPECIFICATION SHEET INCH POUND MIL-S-22885/100A 16 May 2003 SUPERSEDING MIL-S-22885/100 (USAF) 27 August 1982 MILITARY SPECIFICATION SHEET SWITCH, PUSH BUTTON, ILLUMINATED, 4-LAMP, SPDT AND DPDT, 7.5 AMPERES, SILVER CONTACTS,

More information