HPX-T Series. Auto-tuning Fiber Optic Photoelectric Control. Specifications CLICK FEATURES AMPLIFIER UNIT ORDER GUIDE. No.
|
|
- Allan Gilmore
- 5 years ago
- Views:
Transcription
1 6 HPX-T Series Au-tuning Fiber Optic Phoelectric Control Specifications FEATURES Built-in Au-tuning Aumatically Adjusts Scanning Characteristics. Adjustment Steps, Results and Scanning Conditions Digitally Displayed on Built-in au-tuning. (Scanning conditions are read select scanning characteristics.) : Close long scanning distances aumatically supported on a single control unit. Digital display indicates adjustment steps, results and scanning conditions. : Incoming light level display, scanning margin display, insufficient sensitivity display, maximum sensitivity setting 3 sensitivity settings can be selected. : Sensitivity setting (presence detection, back/front judgment), positioning sensitivity setting, maximum sensitivity setting Remote-tuning types T3/TV3 (Mark Detection type) Mutual interference prevention (pulse-phase shift system) OFF delay can be set. Low profile (10mm). Attachable on DIN rail at a single uch. Free-cut optical fiber unit attachable and detachable with single-uch, snap action lever Furnished cable adapter allows ease-of-use with small-diameter cables CLICK AMPLIFIER UNIT ORDER GUIDE Model Shape Supply voltage put mode Operation mode Autuning Remotetuning Incoming light level display Scanning margin display 3 sensitivity settings Timer function Mark detection type Catalog listing Au-tuning Remote-tuning Remote-tuning mark detection type 10 30V dc NPN open collecr PNP open collecr NPN open collecr Light ON/ dark ON selectable ~ ~ HPX-T1 HPX-T2 HPX-T3 HPX-TV3 1 No. CP-PC-2156SE
2 AMPLIFIER UNIT SPECIFICATIONS Model Au-tuning model Catalog listing HPX-T1/HPX-T2 HPX-T3 HPX-TV3 Supply voltage Current consumption Operation mode put mode Control output Response time Sensitivity adjustment 10 30V dc (ripple 10% max.) 50mA max. Light ON/dark ON switch selectable NPN transisr open collecr (-T2: PNP transisr open collecr) put switching circuit: 100mA max. (resistive load), output dielectric strength: 30V max., voltage drop: 1V max. (at 100mA switching circuit), with output short-circuit protection circuit 500 s max. for operation and recovery Sensitivity and hysteresis aumatically set by butn (au-tuning) (Remote-tuning is possible on -T3/-TV3 types by short-circuiting the pink lead. *) Light emitter (680 nm) Display functions Timer function Ambient light immunity Operating temperature range Srage temperature range Humidity range Digital display: incoming light level (in mode), scanning margin/setting error (after sensitivity is set) Operation indicar: red (lit at output ON). Stability indicar: green (ON during stable LO/ON during stable DO). OFF delay timer function: ON/OFF indication by decimal point. OFF delay 40ms/instantaneous switch selectable Incandescent lamp: 5,000lux max., Sunlight: 20,000lux max. ~ C (if gang mounted ~ C) ~ C 35 85% RH (condensation not allowed) Insulation resistance 20M min. (at 500V dc) Dielectric strength Vibration resistance Wiring method Weight Others * : Sensitivity Setting only. 1000V ac, 50/60Hz for 1 minute between case and electrically live metals 10 55Hz, 1.5mm peak--peak amplitude, 3 times in X, Y and Z directions Pre-leaded Approx. 55 g (body only with 2m cable) Reverse connection protection circuit, power ON/OFF malfunction prevention circuit (approx. 200ms) 2
3 EXTERNAL DIMENSIONS Amplifier unit HPX-T When mounted on bracket (supplied) (unit: mm) When mounted on DIN rail 3
4 NAMES OF PARTS OPERATIONAL TIMING CHARTS OF OUTPUTS & INDICATORS 4
5 SENSITIVITY TING (Tuning) Be sure place the optical fiber within the scanning distance before setting the sensitivity (tuning). Sensitivity setting Step Setting conditions Operation Digital indicar Display 1 ~ switch. 1 is displayed. Display during Insufficient sensitivity Digital indicar Display during insufficient level difference Digital indicar 2 Place the workpiece at the specified position. Workpiece ~ ~ ~ Background butn once (1st time) 2 is displayed. 2 is displayed. Move the workpiece. 3 Workpiece Background butn once (2nd time). Scanning margin 1 9 is displayed. E blinks. E 4 ~ ~ ~ End of Procedure switch. Incoming light level 09isdisplayed. E blinks. put is OFF. E put is OFF. Note: The order of steps 2 and 3 may be reversed. 5
6 Positioning sensitivity setting Step Setting conditions Operation Digital indicar Display 1 ~ switch. 1 is displayed. Display during insufficient sensitivity Digital indicar Align fiber unit with workpiece at desired position. 2 butn once. 2 is displayed. 2 is displayed. 3 End of Procedure ~ switch. Incoming light level 09isdisplayed. ~ ~ E blinks. put is OFF. Maximum sensitivity setting Step Operation Digital indicar Display 1 switch. 1 is displayed. 2 butn for at least three seconds. H is displayed. 3 End of Procedure switch. Incoming light level 09isdisplayed. ~ ~ 6
7 Setting the remote sensitivity (-T3, -TV3) Set the hysteresis level according the externally input au-tuning signal instead of pressing the tuning butn. (Note that positioning and maximum sensitivity cannot be set.) Step Operation If error occurs 1 Leave the mode selecr switch at. Workpiece Background Placetheworkpieceatthespecified position. Input the 1st signal the remote-tuning input. Workpiece It is same of Sensitivity setting s case. Please see the Sensitivity setting s page (Display during Insufficient Sensitivity and Insufficient Level Difference). 2 Background Move the workpiece, and input the 2nd signal the remote-tuning input. (Allow at least 200ms between input of the 1st and 2nd signals.) 3 The scanning margin is displayed for about one second after the 2nd remote-tuning signal is input, and the display then returns normal. When the remote sensitivity is not set, either cut the pink lead (remote-tuning input lead) at the root of the cord, or connect it + power supply terminal. DISPLAY DURING OPERATION ( Mode) Situation Operation Display Digital indicar Regular operation ~ at output ON during stable light or dark ON Incoming light level 09isdisplayed. To monir scanning margin during tuning (only when setting the sensitivity) See Note. butn once. The scanning margin 1 9 during tuning is displayed. See Note. ~ ~ Note: is displayed when set by positioning. is displayed when set by maximum sensitivity. TING THE OFF DELAY TIMER Be sure set the mode selecr switch before setting the OFF delay timer. Operating state Operation Digital indicar Switching from Instantaneous put OFF Delay put butn for at least 10 seconds. Digital display OFF delay timer lit Switching from OFF Delay put Instantaneous put (Same as above) Digital display OFF delay timer out 7
8 SCANNING MARGIN DISPLAY The following table shows the correspondence between the scanning margin and the digital display after the sensitivity has been set: Scanning margin display (digital indicar) Margin (facr) for aumatically set hysteresis 1.0X min. 1.2X min. 1.5X min. 2X min. 3X min. 4X min. 5X min. 6X min. 7X min. OUTPUT CIRCUIT HPX-T1 (NPN) HPX-T2 (PNP) HPX-T3, HPX-TV3 (NPN) WIRING DIAGRAMS HPX-T1 (NPN) When driving a direct load When connected a voltage input device HPX-T2 (PNP) When driving a direct load When connected a voltage input device HPX-T3, HPX-TV3 (NPN) When driving a direct load When connected a voltage input device 8
9 MOUNTING METHOD The single-uch DIN-mounting system allows the HPX-T be mounted on a DIN rail without using any ols. How attach/detach /from a DIN rail (1) Hook the front of the amplifier over the DIN rail. (2) Push down the rear of the amplifier on the DIN rail. (3) To detach the HPX-T from the DIN rail, pull out the rear lever with a flat-head screwdriver. When a DIN rail is not used When not using a DIN rail, use the mounting bracket (supplied). To attach the HPX-T on the mounting bracket, follow the same procedure as that for the DIN rail. BASIC PRECAUTIONS Wiring (1) Be sure connect the phoelectric control the power supply and load correctly. (2) If a high-voltage cable or power cable is located near a phoelectric control, isolate the phoelectric control s cable or lay in a separate conduit prevent surge or the influence of noise. (3) Connect the cable securely the connecr using a crimp terminal. (4) Use leads of 0.3mm 2 in cross-sectional area for extensions. The lead length should be kept 100m at most. When connecting extensions, consider the possible influence of noise. (5) If a switching power supply is used, ground its frame. (6) If a capacitive load is used, connect a current limiting resisr limit rush current 100mA or less. Handling (1) Do not swing a phoelectric control by its cable. (2) Do not impact or damage the scanning head. (3) Do not pull the cable of the phoelectric control with excessive force. The tensile strength of the cable is about 49N at 50cm from the conduit. 9
10 10 lssued Apr., 2002
Fiber-Optic Sensor Amplifiers E3S-X3, E3X-NL and E3X-NM Discontinued March 2012; Revised Replacements
NO: PH-165 PRODUCT: E3S-X3, E3X-NL, E3X-NM DATE: August 2012 TYPE: Discontinuation Update Fiber-Optic Sensor Amplifiers E3S-X3, E3X-NL and E3X-NM Discontinued March 2012; Revised Replacements Affected
More information1.5mm amplitude at 10 to 55Hz frequency in each X, Y, Z direction for 2 hours 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times
Color Mark Color Mark Feature Outstanding color matching accuracy - RGB light emitting diodes and 12-bit resolution - 2 detection modes (color only / color + intensity) - -step sensitivity adjustment for
More informationSU17 Series Fiber Optic Sensors
SU17 Series Fiber Optic Sensors Fiber Optic Diffuse and Thru-Beam Mode See page 750 Sensing Range: Determined by fiber optic cable Output: NPN, PNP Built-in auto-tuning Digital display Mutual interference
More informationPhotoelectric Sensors E3F2
Photoelectric Sensors E3F2 Threaded Cylindrical Photoelectric Sensors with Built-in Amplifier for Use as an Optical Proximity Switch M18 DIN-sized cylindrical housing Housing materials: plastic, nickel
More informationType F70AB F70ABPN. Digital display. Simple operation featured
F70Aseries Digital display Fiber optic sensors Digital indication of sensing information Simple operation for setting functions Direct reading of stablility level is available along with received light
More informationType. NPN output F71R F71G F71B F71W F71RH F71GH F71BH F71WH. Manual setting general-purpose type. Manual setting high-speed type
F71series Manual setting Fiber optic sensors Adjacent installation of up to 8 units - Proprietary Anti Interference feature is used - High-accuracy-8-turn sensitivity adjustment - Position indicator is
More informationWeekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N
Weekly Timer 1/4 DIN Size Timer Features Prompted Programming and Large LCD Display 24 hours x 7 days programming using just 5 switches 16 program steps and cycle operation Two independent 15 A control
More informationF70series. Variation. Excellent detection performance
F70series Digital display Fiber optic sensors Digital indication of sensing information arious advanced functions provide for optimum use of the sensor Unparalleled high resolution allows highly accurate
More informationWeekly Time Switch. Rated time Time setting range Time division 24 hrs x 7 days 00:00 to 23:59 1min
Weekly Time Switch Easy Programming with Large LCD Display and Interactive Functions Programming for 24 hrs x 7 days using just five switches. Sixteen program steps available. Power supply freely selectable
More informationHow to Order. Flow rate (l/min) Applicable models PFA710, PFA750. Nil
Integrated Display Type Flow rate range 0 2 5 Symbol 0 02 03 0 Specifications ow Order PFA7 0 0 27 0l/min 5 l/min 0 00l/min 20 200l/min 0l/min Port size /8 / 3/8 /2 Model Measured fluid Detection type
More information20 mm Beam Pitch General Purpose Area Sensor. Distance between parts shelf and sensor can be shortened (Enables miniaturization of equipment)
OTHER SUNX PRODUCTS SERIES 0 mm Beam Pitch General Purpose Area Sensor Diagnosis Self-diagnosis Test input Interference prevention Wide sensing area of 7 m,60 mm with 0 mm beam pitch Refer to p.9l for
More informationCylindrical Photoelectric Sensor CY-100 SERIES
Cylindrical Photoelectric Sensor CY-00 SERIES Listing (2 m cable length type only) Features Wide product range Shape: Standard type Side view type Connector: 2 m cable length type M2 plug-in connector
More informationSA1J-F: Full Color Fiber Optic Sensors
Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA, 94080-6370 ain ice: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com This new line of full color sensors offers
More informationSERIES. Manual teaching. Place a workpiece bearing the reference color under the fiber head and press the teaching button.
SERIES Color Detection Sensor Reliable and Precise Color Discrimination Marked Conforming to EMC Directive Red, Green and Blue LEDs incorporates red, green and blue LEDs as its beam sources, which promise
More informationSolid-State Digital Timer
Solid-State Digital Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay,
More informationSlot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON
Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that
More informationDigital Fiber Amplifier E3X-DA51. Ordering Information. Digital Fiber Amplifier Provides High Performance and Ease of Use
Digital Fiber Amplifier Digital Fiber Amplifier Provides High Performance and Ease of Use First amplifier to offer three user-selectable displays: digital level, percentage and analog display Flashing
More informationPhotoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units)
Photoelectric Sensors with Separate Digital Amplifiers (Laser-type Amplifier Units) All seven laser types provide ample long distance, for the Diffuse Reflective Model 1.000 mm and for Retroreflective
More informationPhotoelectrics Through-beam Type PA18C.T..., DC
Photoelectrics Through-beam Type, DC Miniature sensor range Range: 20 m (Axial), 16 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to 30 VDC Output:
More informationManual teaching. Place a workpiece bearing the reference color under the fiber head and press the teaching button. Teaching button
FZ- SERIES Color Detection Sensor N output type available Timer Reliable and precise color discrimination FX-30 Conforming to EMC Directive UL Recognition FZ- FX-A FX-3 FX-CH Color Detection Analog Output
More informationType Contact form Model
Low Signal Relay G6A High sensitivity can be driven by digital circuits. Low-profile design allows use in.70 mm (0.50 in) PC board rack. Surge withstand meets FCC Part 68 regulation. Units can be mounted
More informationUV Power Monitor. incident light 200 to 370 nm 300 C (Use at temperatures below the Fiber Unit s rated operating
UV Power Monitor Monitor the Output of a UV Light Source through an Optical Fiber Cable Head Unit withstands temperatures of up to 300 C. Easy-to-read digital display of measurement values. Harmful UV
More informationE6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm
Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.
More informationAP-40. AP-40 Series Features Industry s smallest-sensor head Ultra lightweight High-speed response Two-color LED digital pressure display
AP-34 Separate Amplifier Type Sensor Series Features Industry s smallest-sensor head Ultra lightweight High-speed response Two-color LED digital pressure display Description Industry's smallest & lightest
More informationSuper Side. Sense type
Front ense type Photoelectric ensor Photoelectric ensor series uper ide ense type uper ide-sense Type projects the beam from the mm (.9 inch) of wide edge of the sensor. M pig-tail connector types are
More informationOrdering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment.
Absolute 60-mm-dia. Rotary Encoder A High Accuracy and Durability for Automatic Equipment Stronger shaft and greater durability (120 N in the radial direction and 50 N in the thrust direction) than previous
More information02/11/2015
DIN Rail Mount 17.5 mm MUS/MUSF 80 AC/DC Part number 84872141 Control relays monitoring their own power supply - MUS : Over/undervoltage control Selectable latching (memory) function - MUSF : Over/undervoltage
More informationV 180 Series Photoelectric Switches
D A T A S H E E T V 180 Series Photoelectric Switches VS 180 / VE 180 1 m x VL 180 m 1 m*) *) with polarizing filter v VT 180 110 mm 00 mm n Photoelectric switches of cylindrical design in threaded metal
More informationMultifunction Digital Timer
Multifunction Digital Timer 72 x72 mm Timer with Easy-to-use Functions Nine output modes accommodate a wide variety of applications. All parameters set by scroll-through menus accessed from the front panel.
More informationLED Driver Compact fixed output
Driver LC 10W 250mA fixc R ADV ADV series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 250 ma For luminaires of protection class II For ambient temperatures
More informationSENSORS S62. Compact Sensors - S62. The most complete universal sensor in a compact 50x50 mm housing. Sensors with red, infrared LED or LASER emission
Compact Sensors - S6 S6 The most complete universal sensor in a compact x housing Sensors with red, infrared or LASER emission from 3 cm to m Polarized retroreflective up to 0 m Multivoltage 4-40Vac/4-60Vdc
More informationLED Driver Linear / area fixed output
Driver LC 10W 350mA fixc lp SNC2 ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 350 ma Max. output power 10.2 W Up to 80 % efficiency For
More informationLED Driver Compact fixed output
Driver LC 40W 900mA fixc C SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 900 ma Max. output power 40 W Nominal life-time up to 50,000
More information2 2 Relay outputs. M DIN W72 H7mm. LE7 Weekly/Yearly timer
LE7M-2 W72 H72mm, Weekly/Yearly Timer Features Easy to check and change the program setting Customizable weekly or yearly unit time setting and control by user Includes daylight saving time function Built-in
More informationSelf--powered Time Counter
Self--powered Time Counter Subminiature Time Counters With Enhanced Appearance and Features Large display with 8.6 mm (0.338 in) height Available with backlit LCD PNP/NPN DC voltage available Sevendigits,timerange0to
More informationOperating instructions Retro-reflective sensor. OJ50xx laser / / 2010
Operating instructions Retro-reflective sensor OJ50xx laser 70481 / 00 05 / 010 Contents 1 Preliminary note3 1.1 Symbols used 3 Safety instructions 3 4 Installation 4 4.1 Installation of the supplied mounting
More informationPHASED OUT. LED control gear Compact fixed output. Driver LC 40W 900mA fixc C SNC China Domestic ESSENCE series
Product description Fixed output built-in LED Driver Constant current LED Driver Output current 900 ma Max. output power 40 W Nominal life-time up to 30,000 h For luminaires of protection class I and protection
More informationLED Driver Compact fixed output
Driver LC 45W 1050mA fixc C SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 1,050 ma output power 45 W Nominal life-time up to 50,000
More informationAUTOMATIC SETTING TYPE OPTICAL FIBER PHOTOELECTRIC SENSORS. Long Sensing Range. The standard M4 fiber offers the sensing range of 600mm inch.
AUTOMATIC TING TYPE OPTICA FIBER PHOTOEECTRIC SENSORS UZF Series COMPACT SIZE WITH ADVANCED SENSING TECHNOOGY Thickness : mm inch Just mm inch thick. Even a number of UZF amplifiers save space. Only mm
More information60 ± 10 mm 4. (See Note.) PNP E3MC-X ± 4mm 4 NPN E3MC-MX11. (See Note.) PNP. mended. fiber. 4 NPN E3MC-MY11 E32-T16
R RGB Color Sensor RGB Color Sensor Detects Subtle Color Differences The Most Advanced Color Sensor In the Industry H LED light source insures ease of operation and long life H No separate light source
More informationPressure Sensor. Ordering Information. Mini-Cube Pressure Sensor with Easy-to-Read LED Display
Sens Mini-Cube Sens with Easy-to-Read LED Display Industry s smallest, lightest l Both analog bar and digital pressure values are displayed Two independent outputs plus one analog output are available
More informationInstallation Guide VL-MV10. Model No.
Installation Guide Model Name Model No. Main Monitor Station VL-MV0 R Main monitor station is described as "main monitor" in this guide. R In this guide, the suffix of each model number (e.g., the "EX"
More informationAbsolute Rotary Encoder E6CP
Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the
More informationLUT Luminescence scanners: Seeing what no-one else can
LUT Luminescence scanners Luminescence scanners LUT Luminescence scanners: Seeing what no-one else can Special features: A semi-conductor light source is used in the LUT series no lamp change required.
More information1 Output 1 operation. 3 Pressure unit display. 4 Main display Large 4-character LCD display. 5 Sub-display Small 4-character LCD display.
ure Sensor DP-100 Series INSTRUCTI MANUAL High-performance Digital Display For use outside Japan MEUML-DP100 V1.1 Thank you for purchasing products from Panasonic Electric Works SUNX Co., Ltd. Please read
More informationZN-PD. Smallest Air Particle Sensor in the Industry for In-line Measurement. Air Particle Sensor. Features
Air Particle Sensor Smallest Air Particle Sensor in the Industry for In-line Measurement Suitable for continuous measurement. With Realtime Clean Air Monitor. Be sure to read Safety Precautions on page
More informationDimensions. Model Number. Electrical connection. Features. Pinout Product information. Indicators/operating means. LGS25 Serie.
Q Dimensions Transmitter Detection field + 9. Detection field 7.8 n Beam. Beam Receiver III 0. 0 Fix H H H Fn Model Number Light grid with fixed cable with -pin, M x connector, and fixed cable with 8-pin,
More informationOperating instructions Through-beam sensor. OJ51xx / / 2004
Operating instructions Through-beam sensor OJ5xx UK 7098 / 0 07 / 004 Contents Function and features... Installation... Installation of the supplied mounting fixture...4 Electrical connection...4 Setting
More informationModel Number Structure
Cycle Control Units CSM DS_E_7_1 Refer to Safety Precautions for All Power Controllers. Used in Combination with the to Enable High-precision Temperature Control Use cycle control to achieve power control
More informationType Contact form Model Ag (Au clad) Standard DPDT G6A-274P-ST-US Low-sensitivity DPDT G6A-274P-ST40-US
Low Signal Relay G6A Fullly Sealed Relay with High Impulse Withstand High sensitivity can be driven by digital circuits. Low-profile design allows use in 12.70 mm PC board rack. Surge withstand meets FCC
More informationType Contact form Model PCB SPDT G6E-134P-ST-US G6E-134PL-ST-US. Type Contact form Model
Low Signal Relay G6E Subminiature 7.87 H x.1 W x 16 L mm (0.31 H x 0.3 W x 0.63 L in). High sensitivity with pick-up coil power of 8 mw. Surge withstand meets FCC Part 68 rule and Telcordia 2.5 kv Specifications.
More informationSPACESCAN SERIES SS 02
Description 0-10 metre sensing range 12 to 384 channels Available with channel spacing of 5, 10 or 20 mm Active length of 225 mm to 1920 mm Housing length of 300 mm to 1980 mm Plug connection 18-30 V dc
More information7 SegmneDisplay Unit With High Bright Characters (D1SC-N : W32 H57mm, D1SA Series: W11 H22mm)
SC-N/SA Series 7 Segment Display Unit 7 SegmneDisplay Unit With High Bright Characters (SC-N : W32 H57mm, SA Series: W H22mm) Features Selectable decimal (0 to 9) or hexadecimal (0 to 9, A to F) indication
More informationAssembly. Front view. LEDs. Parametrization interface. Power Bus
otation Speed Monitor Features Assembly 1-channel signal conditioner 2 V DC supply Input for 2- or -wire sensors Input frequency 10 mhz... 50 khz elay contact output Start-up override and restart inhibit
More information10 SERIES. Light dependent relays A
10 SERES 10 SERES Relays for automatic control of lighting according to the ambient light level ntegral light sensor For pole or wall mounting 10.32-2 O 16 A output contacts 10.41-1 O 16 A output contact
More informationtechnical data (according to IEC ) Degree of protection IP 67 Max. ripple content 15 % U B / 20 % U B (amplifier) No-load supply current
Inductive Sensors: high-temperature ü For ambient temperatures of up to +230 C ü With integrated electronics, up to +180 C ü With external electronics, up to +230 C ü Excellent long-term reliability (according
More informationCSM Color sensors. Color sensors for the detection of a single color in restricted space conditions
CSM Color sensors Color sensors for the detection of a single color in restricted space conditions Due to its compact design, the CSM can be used in the most confined of spaces. The choice of color tolerance
More informationPBC series. RoHS. Ready. IEC-Type Contactors & Accessories 9-80 Amp AC-3, Amp AC-1 AC Coils. P&B PBC Series IEC Type Contactors & Accessories
PBC series IEC-Type Contactors & Accessories 9-80 Amp AC-3, 25-125 Amp AC-1 AC Coils File E38802 (PBC) RoHS Ready Users should thoroughly review the technical data before selecting a product part number.
More informationOperating instructions Through-beam sensor. OJ51xx laser / / 2010
Operating instructions Through-beam sensor OJ5xx laser 70480 / 00 05 / 200 Contents Preliminary note. Symbols used 2 Safety instructions Functions and features 4 4 Installation 4 5 Electrical connection5
More informationAPPLICATIONS. Automatic warehouse. Trasportation lines
INDUCTIVE TUBULAR SENSOR M12 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
More informationOnline data sheet SGS4-S108P3PS2W03 SLG SWITCHING AUTOMATION LIGHT GRIDS
Online data sheet SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS SGS-S08PPSW0 SLG SWITCHING AUTOATI LIGHT GRIDS A B C D E F H I J K L N O P R S T Detailed technical data Features Technology Ordering information
More informationCAMTO LTD. Arc detecting system DC/AC
CAMTO LTD Arc detecting system DC/AC Arc detecting system DC/AC The system is based on experience with arc protection since 1962. The system units are built into boxes that all fit on a 35 mm DIN-rail.
More information2 2 Relay outputs. M DIN W72 H7mm. LE7 Weekly/Yearly timer
Weekly/Yearly Timer W72 H72mm, Weekly/Yearly timer Features Easy to check and change the program setting Customizable weekly or yearly unit time setting and control by user Includes daylight saving time
More informationSAFETY TERMS AND SYMBOLS
Contents Page Safety Terms and Symbols. 1 Introduction. 4 Preliminary Notes 5 Panel Description. 6 Operation Method... 10 Specifications 13 Maintenance. 16 Cleaning 16. Troubleshooting 16. Interchangeable
More informationLED control gear Compact fixed output
Driver LC 40W 900mA fixc SR SNC ESSENCE series Product description Independent fixed output LED Driver Constant current LED Driver Output current 900 ma Max. output power 39 W Nominal life-time up to 50,000
More informationLED Driver Compact dimming
Driver CA 15W 180-350mA flexc PH-C SR ADV ADVACED series Product description Dimmable constant current ED Driver (SEV) Independent ED Driver with cable clamps Selectable output current between 180, 250
More informationVoltage inputs: High and low signal voltages (count, reset, short, counter No. selection, I/O inhibit) No-contact outputs: RUN, forecast
Multi-maintenance Counter/Timer (DIN 72 x 72) CSM DS_E_4_1 Nine Built-in Counters/Timers to Measure Equipment Operating Cycles and Times and Forecast Maintenance Timing Provides up to nine counters or
More informationAmplifier for fiber optics. Dimensioned drawing
Amplifier for fiber optics Dimensioned drawing up to 525mm up to 120mm 10-30 V DC 3-digit display for indicating and setting the switching threshold NEW: AutoSet function for easy sensor adjustment Menu
More informationBMOA Component Systems. Miniature Optical Sensors. c Features. Technical Description
Component Systems Technical Description Features Applications The mini optical series of sensors are among smallest sensors in the world. Mini optical sensors require almost no space and with their low
More informationAPPLICATIONS. Automatic warehouse. Trasportation lines
INDUCTIVE TUBULAR SENSOR M8 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
More informationMaterial: Weight: Bearing Life: Shaft Speed: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
More informationHID control gear Electronic. PCIS, PCS outdoor FOX B011 PCI outdoor. Ordering data. Circuit power1. tc/ta for 60,000 h For luminaires with 1 lamp
Product description Pulse packets for increased ignition energy (pulsecontrol technology) Flicker-free light Colour stability thanks to constant power No acoustic resonance Safety shutdown if a lamp is
More informationMaterial: Weight: Shaft Speed: Starting Torque: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:
Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:
More informationLED Driver Linear / area dimming industry. Driver LC 200W 1050mA UNV ADV IND ADVANCED series
Driver LC 200W 1050mA UNV ADV IND ADVANCED series Product description Independent constant current LED Driver For dry, damp and wet locations Max. output power 200 W Up to 93.7 % efficiency For luminaires
More informationD12 Expert Series TEACH-Mode Fiber Optic Sensors
TEACH-Mode Fiber Optic Sensors One-button programmable sensors for use with glass or plastic fibers D Expert Features Fiber optic sensors for DIN rail mounting; 0 to 30V dc operation Visible red (680 nm)
More informationHYL-080D1750G358. Constant current LED driver DALI Dimmable. LED Driver. Product description. Benefits. Interfaces.
Linear / area dimming Constant current LED driver DALI Dimmable Product description Dimmable built-in constant current LED Driver Adjustable output current between 1,050 and 1,750mA via DIP switch Max.
More informationE8Y. Micropressure Sensor with Easy-to-Read Digital Display. Differential Pressure Sensor. Ordering Information. Sensors
Differential Sensor Micropressure Sensor with Easy-to-Read Digital Repeat accuracy of ±1% FS (setting resolution: 0.01 kpa), high-precision pressure control available. Compact design (31 mm) saves mounting
More informationW 9-2: A Versatile, Complete and Compact Series
suitable sensor can be selected from the W 9- series. Overview of the sensors: WT 9-, with adjustable background suppression, max. scanning distance 0 mm, WT 9-, energetic, max. scanning distance 0 mm,
More informationMaterial: Weight: IP Rating: Cable: Connector:
Automation / Mini Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 6 mm Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution: Supply Voltage:
More informationOrdering Information. Self -P owered Count Totalizer H7EC. Subminiature Total Counters With Improved Appearance and Features
R Self -P owered Count Totalizer Subminiature Total Counters With Improved Appearance and Features H Large display with 8.6 mm (0.338 in) height H Available with backlit LCD H PNP/NPN DC voltage input
More informationI r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100
DATASHEET - NZMH2-A100 Circuit-breaker, 3p, 100A Part no. NZMH2-A100 Catalog No. 259099 Similar to illustration Delivery program Product range Circuit-breaker Protective function System and cable protection
More informationSERIES x5. Nickel-plated brass Connection 1) PUR cable type 1 Degree of protection. IP 67 Mounting. Embeddable Max. switching frequency
1 Size SERIES 400 x SERIES x Operating distance mm 0.8 0.8 1. Housing material Connection 1) PUR cable type 1 PUR cable type 1 / Connector S8 PUR cable type 1 Degree of protection Mounting Max. switching
More informationVoltage inputs: High and low signal voltages (count, reset, short, counter No. selection, I/O inhibit) No-contact outputs: RUN, forecast
Multi-maintenance Counter/Timer (DIN 72 x 72) CSM DS_E_5_4 Nine Built-in Counters/Timers to Measure Equipment Operating Cycles and Times and Forecast Maintenance Timing Provides up to nine counters or
More informationEmergency lighting units EM powerled
E 15 W CE CPS ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation
More informationWIRING. Connection connector. NPN output type Standard type. Main circuit. High-function type. Main circuit. PNP output type.
INSTRUCTI MANUAL Sensor High-performance Digital Display DP-1 Series Thank you very much for using SUNX products. Please read this Instruction Manual carefully and thoroughly for the correct and optimum
More informationNo Need to Select. Intensity Detection (Previous Type)
Color Sensing Digital Fiber Sensor CSM DS_E_5_4 Easy and Reliable he Fiber Sensor hat Sees in Color High-power white LED and multi-rgb processing eliminate the need to select light source (wavelength)
More informationLevel Measurement silometer FMC 420, FMC 423
Technical Information TI 077F/00/en Level Measurement silometer FMC 420, FMC 423 For connecting to capacitance probes or Deltapilot S hydrostatic probes Main applications The is used for continuous level
More informationSensors. SA1J: Full Color Recognition Sensors. General Specifications. Q-4 USA: (800) 262-IDEC or (408) , Canada: (888) 317-IDEC
SA1J: Full Color Recognition SA1J: Full Color Recognition Introducing a cost-effective solution for full color sensing applications IDEC s SA1J full color recognition sensor. Outstanding benefits of the
More informationEmergency lighting units EM powerled
CE CPS 12/15 W ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation
More informationSH2RE16A4. Output relay module. Benefits. Description
Output relay module Benefits Integrated system. Dupline is the brand name for Carlo Gavazzi s 2-wire bus system. Cost reduction. The use of a bus system is a proven way to reduce installation costs - especially
More informationEVENT INPUT/OUTPUT MODULE [PUME]
PUM Series Multi-loop module type Temperature controller DATA SHEET EVENT INPUT/OUTPUT MODULE [] is a digital input/output module used as an auxiliary input/output of control modules. Each module, 30mm
More informationModular pulse operated latching relay 16 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 Modular pulse operated latc / 05 / 07 / 08 / 10 / 11 / 12 / 14 / 16 / 20 and 927 00 / 49 CONTENTS PAGES 1. Description,
More information45 mm : all channels. Output indicator Yellow LED System status indicator Light source Infrared (880 nm) Opening angle +/ 4 Emission angle +/ 5
SPACEGUARD SERIES Description 1-12 metre sensing range 16 to 56 parallel scanning beams Active height of 0 mm to 2520 mm Detector length of 1928 mm to 2648 mm 3 different channel placement models Cable
More informationTroubleshooting. 1. Symptom: Status indicator (Red LED) on SSR is constant on. 2. Symptom: Output indicator (Yellow LED) on SSR is flashing.
Product Data Electrical Data SST (Transmitter) SSR (Receiver) Supply voltage 18 30 V dc Max. Voltage ripple 15 % (within supply range) Current consumption 100 ma (RMS) 75 ma Digital - 100 ma Max. outputs
More informationW100L: Laser Sensor in Mini- Format
Product group W00 Laser Photoelectric proximity switch energ. Photoelectric reflex switch W00L: Laser Sensor in ini- Format Through-beam photoelectric switch Where applications demand it, the sensor can
More informationSafety Light Curtains
4 Safety Light Curtains F3SJ-A Safety Light Curtains Resolution: 14 mm (0.55 in.), 20 mm (0.79 in.), 25 mm (1.01 in.) 30 mm (1.18 in.), or 55 mm (2.17 in.) Range: 7 m (23 ft.) or 9 m (29.5 ft.) dependent
More informationBimetal Temperature Switch
Phone: +44 19 635533 Fax: +44 19 635262 Data sheet 608301 Page 1/8 Bimetal Temperature Switch Special features Electromechanical temperature switch with a fixed switching temperature Protection type IP52,
More informationWF next: Fork sensors for a wide range of applications
WF next: Fork sensors for a wide range of applications D ATA S H E E T Fork sensors TThe detection of labels, marks and double sheets, as well as holes and edges are typical applications for the new WF
More informationElectrical connection
Color sensors Dimensioned drawing en 02-2013/01 50121262 068-14515 12mm 32mm 10-30 V DC 500 Hz Scanner for color detection Simultaneous selection of up to 3 colors Detection independent of distance Teach-in
More informationPROXIMITY SWITCHES INDUCTIVE TUBULAR SENSOR M30 SERIES HIGHLIGHTS APPLICATIONS
INDUCTIVE TUBULAR SENSOR M30 SERIES There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating
More information