Version 1.07 ( ) Installation manual FISCUBE Audi Article-ID For factory equipment MMI High (2G) MMI High Navigation Plus

Transcription

1 Version 1.07 ( ) Installation manual FISCUBE Audi Article-ID For factory equipment MMI High (2G) MMI High Navigation Plus (3G) MMI Navigation Plus with MMI touch (3G Plus) Kufatec GmbH & Co. KG Dahlienstr Bad Segeberg

2 Content General advice...2 Safety Instructions...3 References of legal regulations for operation...3 FISCUBE...4 Scope of delivery...5 Wiring diagram...5 Installation instruction MMI 2G...6 Interface connection MMI 2G...7 Connection Video loom MMI 2G...9 Connection video loom MMI 2G RVC available...10 Installation instruction MMI 3G / MMI 3G Plus...11 Interface connection MMI 3G/ MMI 3G Plus...13 Connection video loom MMI 3G/ MMI 3G Plus...14 Coding...17 USB-connection...18 Control elements...19 Start Up...21 Operation instruction MMI 2G...24 Operating instruction MMI 3G...32 Operating instruction MMI 3G Plus...40 Additional video input 2G/ 3G/ 3GPlus...47 Video output...47 Connection in case of factory fitted analog MMI 2G

3 General advice While developing this product, your personal safety combined with the best operating service, modern design and an up-to-date production technique was especially taken into account. Unfortunately, despite the utmost care injuries and/or damages might occur due to improper installation and/or use. Please read the attached instruction manual completely with great care and keep it! All articles of our production line pass through a 100 % check - for your safety and security. We reserve the right to carry out technical changes which serve the improvement at any time. According to each article and purpose, it is sometimes necessary to check each country s legal regulations before installing and starting the unit. In case of guarantee claims, the device has to be sent back to the seller in the original packaging with the attached bill of purchase and detailed defect s description. Please pay attention to the manufacturer s return requirements (RMA). The legal warranty directions are valid. The guarantee claim as well as the operating permission becomes invalid due to: a) unauthorized changes to the device or accessories which have not been approved or carried out by the manufacturer or its partners b) opening the device s frame c) device s repairs carried out by one s own d) improper use / operation e) brute force to the device (drop, wilful damage, accident etc.) During installation, please pay attention to all safety relevant and legal directions. The device has only to be installed by trained personnel or similarly qualified people. Please limit on installation or function problems the troubleshooting to 0.5 hours for mechanical and 1.0 hours for electronic works. To avoid unnecessary work and to save costs, please send us immediately via the contact form Kufatec ( a request to our technical support. Please quote the following necessarily: Vehicle Identification Number Part number of the retrofit kit Detailed description of problems Already conducted operations 2

4 Safety Instructions Installation requires special knowledge. Do not install the unit yourself. For safe and reliable installation, consult a dealer having special knowledge. Never use bolts or nuts from the car s safety devices for installation. If bolts or nuts from the steering wheel,brakes or other safety devices are used for installation of the unit, it may cause an accident. Use the unit with a DC 12V negative ground car. This unit cannot be used in large trucks which use a DC 24V battery. If it is used with a DC 24V battery, it may cause a fire or accident. Avoid installing the unit in following places: - Where it would hinder your safe driving. - Where it could damage the car s fittings. This unit is only for use in the following vehicles. Only connections described within this instruction guide are allowed or required to use for installation. For damage impact caused by faulty installation, unsuitable connections inappropriate vehicles Kufatec GmbH assumes no liability. We advise you that these units process datas out of the MOST - protocol from the vehicle. As the supplier of this device we don t know the overall system you are working with. If our device causes damage due to other changes made by to the vehicle Kufatec GmbH assumes no liability. Kufatec GmbH supplier do not guaranty the use of the product for changing s within a new vehicle series. If the car manufacturer s don t agree with the installation of our device by reason of warranty the Kufatec GmbH assumes no liability. Please check conditions and warranty before you begin the installation. Kufatec GmbH supplier reserves the right to change the device specifications without notice. NOTE: The road traffic has to have your full attention. Telephone operations should only be done by suitable traffic and weather situations. The volume need to be set that you are still able to realise acoustic warn signals (Police, fire brigade). Errors and changes excepted. References of legal regulations for operation Only use this unit in the intended domain. If you use it in a foreign domain, if the unit is not installed properly, or if the unit will be reconstructed, the guarantee will expire. 3

5 FISCUBE Features DVB-T Integrated DVB-T receiver with recording function E13 approval - 10R Video/Audio coding: MPEG II (No MPEG4 /HD) recording stored on USB source Recording capacity 3h with an 5GB USB-memory recording format: *.mpg Dimensions (LxBxH): 11,4cm x 9,2cm x 3,1cm USB - USB connection for memory stick or HDD (FAT 32) limited capacity 40GB NOTE: Only for hard drives with current consumption not more than 500mA - it's necessary to have a external power supply with capacity over 500mA. Supported audio format: mp3, wav Supported video format: mpg; *.dat; *.vob; *.avi with MPEG4 ASP. USB extension must not be longer than 2 meter! NOTE USB Root directory Up to 95 entries can be stored within the root directory. Each entry can include another 95 entries. NOTE: Entries consists of single files as well as directories. NOTE: Before installing the multimedia system you need to check whether the car is retrofitted with an interface not developed by Kufatec GmbH & Co. KG. In case a non-kufatec interface is fitted we are not able to guaranty the absolute operation of the FISCUBE system. You may need to remove the non-kufatec interface. NOTE: Fiber optical looms MUST NOT BE CRACKED! The recommended radius for fitting is 40 mm. In case of incorrect fitting we are not able to guaranty the absolute operation of the multimedia system. NOTE: After the very first installation the system is completing an automatic generated search for available channels. For refreshing the channel list please see section Start up. NOTE: Make sure no wires are wound up. You produce a coil and thus maybe failures. NOTE: Do not cover the louver so that the device does not overheat. 4

6 Scope of delivery FISCUBE Interface Wiring Aerials 2x Wiring diagram Fig.1 * If factory fitted Note MMI 2G: In case the vehicle is not factory fitted with rear view camera (RVC) the displayinterface needs to be replaced. A displayinterface with FBAS input is needed. After replacing the displayinterface the component protection needs to be removed. Please contact your local Audi dealer. Detailed information please see page 46 5

7 Installation instruction MMI 2G For vehicles WITHOUT factory fitted rear view camera Fig. 2 1 Radiobox A4 8K, A5 8T, A6 4F, A8 4E 2 Radiobox Q7 4L 3 Displayinterface A4 8K, A5 8T 4 Displayinterface A6 4F, A8 4E, Q7 4L 5 FISCUBE Interface For vehicles WITH factory fitted rear view camera Fig. 3 1 Radiobox A4 8K, A5 8T, A6 4F 2 Radiobox Q7 4L 3 RVC control unit Q7 4L 4 RVC control unit A4, A5, A6 4F, A8 4E 5 FISCUBE Interface Location Radiobox The fitting location of the radiobox can be verify within the vehicle. A4 8K, A5 8T, A6 4F, A8 4E Q7 4L Fig.4 Fig.5 6 Fig.6

8 Interface connection MMI 2G Fiber optic cable The connection will be completed plug & play on the back of the radiobox. Fig.7 Remove the original fiber optical cable of the radiobox (Fig. 8). Join the original fiber optical connector to the female connector of the delivered loom (Fig. 9). Fig.8 Fig.9 Put the optical connector of the delivered loom to the radiobox (Fig. 10). ). Figure 11 is showing the final connection of the Interface. Fig.10 Fig.11 7

9 Join the 18-pole connector as well as the fiber optical to the interface (Fig. 12). Fig.12 Fig.13 Aerials To ensure correct operation, aerials should be installed far from: - shielded glasses/ Bodywork/ Other parts which may prevent a good signal reception. Mount the supplied areal horizontally or vertically. It is recommended to try different positions to assess the ideal location for the positioning of the aerials within the vehicle. NOTE: Sequence of Installation Aerials needs to be connected to the interface FIRST. AFTER connecting the aerials the power supply can be completed. In case this sequence will be not considered the reception can be weak. The number of available channels could decrease. Power The connection will be completed plug & play on the back of the radiobox. Remove the original power connector of the radiobox (Fig. 14). Join the original connector to the female connector of the delivered loom (Fig. 15). Fig.14 Fig.15 Put the connector of the delivered loom to the radiobox (Fig. 16). Figure 17 is showing the final connection of the multimedia interface. Fig.16 Fig.17 8

10 Connection Video loom MMI 2G For vehicles WITHOUT factory fitted rear view camera Wire the loom into the front of the vehicle (Fig ). Fig.18 Fig.19 Fig.20 A4 8K, A5 8T Remove the climate control with suitable tools (Fig. 21). Remove the CD-changer (Fig. 22). Loosen the necessary screws of the displayinterface and remove it (Fig. 23). Fig.21 Fig.22 Fig.23 A6 4F, A8 4E, Q7 4L Loosen the necessary screws of the glove box (Fig. 24, 25). Remove the displayinterface (Fig. 26). Fig.24 Fig.25 9 Fig.26

11 Connect the video loom to the displayinterface (Fig. 27). In case the vehicle is not factory fitted with rear view camera (RVC) the displayinterface needs to be replaced Kufatec Article-ID Notes please see page 46 Fig.27 Connection video loom MMI 2G RVC available For vehicles WITH factory fitted rear view camera Location RVC-control unit Depending of the vehicle the RVC-control unit is fitted on different fitting locations. A4 8K, A5 8T, A6 4F, A8 4E Q7 4L Fig.28 Fig.29 Connect the video loom to the RVC-control unit - FAKRA BROWN (Fig. 30). Fig.30 10

12 Installation instruction MMI 3G / MMI 3G Plus Fig Radiobox A4/ A5, A6 4F, A6-A7 4G, A8 4E, Q5 8R 2 Radiobox Q7 4L 3 Radiobox A8 4H 4 3G unit A4/A5, A6 4G, A7 4G, A8 4H, Q5, Q7 5 MMI 3G unit A6 4F 5 DVD changer A8 4H 6 FISCUBE Interface Audi A4 8K, A5 8T, A6 4F, Q5 MMI 3G Loosen the necessary screws of the trunk cover on the left hand side (Fig. 32). The radiobox is located behind the cover (Fig. 34). Fig.32 Fig.33 Fig.34 Audi Q7 4L MMI 3G Remove the trunk cover on the right hand side. The radiobox is located behind (Fig. 36). Fig.35 Fig.36 11

13 Audi A8 4H Remove the trunk cover on both sides. Remove the cover of the rear seats (Fig. 39). Fig.37 Fig.38 Fig.39 Loosen the necessary screws of the bracket of the comfort control unit (Fig. 40, 41). The radiobox is located behind (Fig. 42). Fig.40 Fig.41 Fig.42 Audi A6 4G, A7 4G Remove the cover on the left hand side of the trunk. The radiobox is situated in the bottom part of the control unit rack. 12

14 Interface connection MMI 3G/ MMI 3G Plus Fiber optic cable The connection will be completed plug & play on the back of the radiobox. Remove the original fiber optical cable of the radiobox (Fig. 43). Join the original fiber optical connector to the female connector of the delivered loom (Fig. 44). Fig.43 Fig.44 Put the optical connector of the delivered loom to the radiobox (Fig. 45). Figure 46 is showing the final connection of the multimedia interface. Fig.45 Fig.46 Join the 18-pole connector as well as the fiber optical to the interface (Fig. 47). Fig.47 Fig.48 13

15 Aerials To ensure correct operation, aerials should be installed far from: - shielded glasses/ Bodywork/ Other parts which may prevent a good signal reception. Mount the supplied areal horizontally or vertically. It is recommended to try different positions to assess the ideal location for the positioning of the aerials within the vehicle. NOTE: Sequence of Installation Aerials needs to be connected to the interface FIRST. AFTER connecting the aerials the power supply can be completed. In case this sequence will be not considered the reception can be weak. The number of available channels could decrease. Power With the connection of 2 new wires to the Quadlock connector of the radiobox you will complete the fitting of the power supply. Please see Fig 50. In order to achieve a proper connection we recommend both crimping and soldering the new wires. BROWN (Ground) PIN 17 RED (Steady plus) PIN 18 NOTE: Color of the loom can be gray Connection according loom printing. Fig. 49 Fig.50 Connection video loom MMI 3G/ MMI 3G Plus Wire the video loom in the front oft he vehicle (Fig ). Fig.51 Fig Fig.53

16 A4 8K, A5 8T, Q5 8R, Q7 4L Remove the MMI 3G unit using suitable tools (Fig. 54, 55). Fig.54 Fig.55 A6 4F, A8 4E Loosen the necessary screws of the glove box (Fig. 56, 57). Fig.56 Fig.57 A8 4H Loosen the screw of the center consol cover (Fig. 58) as well as the screws of the MMI 3G unit cover (Fig. 59). Remove the MMI 3G unit. Fig.58 Fig Fig.60

17 A7 4G, A6 4G Climate control needs tob e removed by using suitable tools (Fig. 61). Loosen the screw of the MMI 3G head unit (Fig. 62). Remove the MMI 3G unit of the center console. Fig.61 Fig.62 Fig.63 Connect the video loom to the MMI 3G unit FAKRA GREEN (Fig. 64). Fig.64 NOTE: In case the vehicle is factory fitted with DVD-changer (e.g. A8 4H, A7 4G) the video loom has to be connected to the DVD-changer. Fig.65 Fig.66 16

18 Coding After installation the system needs to be coded. Please contact an Audi dealer. In order to code the vehicle system you need to choose the Self-Diagnosis. Please complete the coding step by step as shown on images below. Address 19 Vehicle Self-Diagnosis Address 19 Diagnostic interface Coding Coding list -Tuner needs to be set from not coded to coded - confirmation 17

19 USB-connection Connecting of USB-memory sticks or hard disc drives (HDD) MP3 music / video via USB The whole memory capacity (Audio + Video) is up to 40GB - Format FAT32 NOTE: Only for hard drives with current consumption not more than 500mA - it's necessary to have an external power supply with capacity over 500mA. Root directory for the complete USB source (audio + video): Up to 95 entries can be stored within the root directory. Each entry can include another 95 entries. NOTE: Entries consists of single files as well as directories. Supported audio format: *.mp3, *.wav Supported video format: *.mpg; *.dat; *.vob; *.avi (MPEG4 ASP, XviD, DivX4.0/5.0/6.0) Files will be filtered autom. In USB audio mode only audio files will be displayed. In USB video mode only video files will be displayed. Last-Position-Memory: - For music files - the last listen track will start again from the beginning For video files - will start again directly where the video has been stopped playing Recording NOTE: In order to record an USB source has to be connected. The source need to have enough capacity for recording. Recording capacity 3h with an 5GB USB-memory recording format: *.mpg 18

20 Control elements Multifunctional steering wheel By pushing the MODE/ARROW button you will reach the menu (Fig. 67, 68). By using the SCROLL you will select the single channels. Push the SCROLL for selecting the channel. Volume adjustment will be done with the SCROLL on the right hand side. Example A5 8T Fig. 67 Example A8 4H Fig. 68 Driver information system The FISCUBE channels will be displayed within the driver information system. Example A5 8T Example A8 4H Fig.69 Fig.70 19

21 MMI operation panel OEM-menu driven operation by using the MMI panel. After pressing the button MEDIA or CD/ (Fig. 71, 72) the source can be selected. After that the FISCUBE can controlled by using the rotate controller as well as the control key (Fig. 74). Example MMI 2G/ MMI 3G Fig.71 Fig.72 Example A8 4H Fig Fig.74

22 Start Up Start up will be displayed in the following on MMI 3G. It is the same procedure for MMI 2G as well as MMI 3G Plus. 1. Push the MEDIA button -Tuner needs to be selected (Fig. 76). Fig Fig.76 Scroll down to 99 SETUP > selecting Programme Record 99 Setup 99 USB-Audio 99 USB-Video Fig.77 Push knob AGAIN > 3. Select REGION & LANGUAGE > Programme 1 Exit Setup 2 Region&Langu 3 Autoscan 4 Vol + 5 Vol Fig.78 Push knob AGAIN > 21

23 4. Select REGION (e.g. GERMANY) Programme Finland France Germany Fig.79 Push knob AGAIN > 5. Select LANGUAGE (e.g. GERMAN) Programme Finnisch French German Indonesian Fig.80 Push knob AGAIN > 6. Select 99 SETUP > Programme Record 99 Setup 99 USB-Audio 99 USB-Video Fig.81 Push knob AGAIN > 22

24 7. Select AUTOSCAN > Search will start automatically Programme 1 Exit Setup 2 Region&Langu 3 Autoscan 4 Vol + 5 Vol Fig.82 When auto search has finished the system will switch the first channel. Push knob AGAIN > 8. Select 99 SETUP > Programme Record 99 Setup 99 USB-Audio 99 USB-Video Fig.83 Push knob AGAIN > 9. Select VOL + > Set the volume to the same level of the radio or other sources of the vehicle. Programme 1 Exit Setup 2 Region&Langu 3 Autoscan 4 Vol + 5 Vol Fig.84 Leave the settings through the menu EXIT SETUP. 23

25 Operation instruction MMI 2G Push the MEDIA or CD/ button -Tuner needs to be selected (Fig. 86). Quelle CD Audi music interface Externe AV Quelle 1 Externe AV Quelle 2 Fig.85 Fig.86 Channel list Single channels can be selected of the channel list by using the knob (Fig. 87). WDR Köln Kabel eins N24 ProSieben SAT.1 Fig.87 Manual channel selection Press the buttons CONTROL > SEEK DOWN or SEEK UP. While using the knob you can switch between the single channels (Fig. 88). ProSieben Sender vor Manuell Fig.88 24

26 Recording USB-memory/ HDD (FAT 32) needs to be connected to the USB connection. Select source > scroll down to > 99 RECORD. > Select 99 RECORD in order to START recording. During recording a REC symbol will be displayed (Fig. 90) Record 99 Setup 99 USB-Audio 99 USB-Video REC Fig.89 Fig.90 Select 99 RECORD again in order to STOP recording. The record will be stored within directory RECORDED_. Playing records Select source > scroll down to > 99 USB-VIDEO > selecting Push knob AGAIN > > Select directory RECORDED_ > Push knob AGAIN > > Select the recorded file you want to play (Fig. 93) Record 99 Setup 99 USB-Audio.. Video 1 Video 2 99 USB-Video Recorded_ Fig.91 Fig.92.. Aufnahme 1 Aufnahme 2 Aufnahme 3 Fig.93 25

27 Store channels as a favorite 1. Option: Select channel and press MEMORY. Select a suitable position and confirm by using the knob again (Fig. 95). Speicher Speicher N24 speichern WDR Köln 1: 2: Hier N24 speichern 3: 4: 5: Kabel eins N24 ProSieben SAT.1 Fig.94 Fig Option: Select channel and press CONTROL > STORE. Select a suitable position and confirm by using the knob again (Fig. 97). ProSieben ProSieben speichern 1: 2: Hier ProSieben speichern 3: 4: 5: Speichern Manuell Speicher Fig.96 Fig.97 Teletext TXT While watching press CONTROL > TT (Fig. 98). Select a teletext site by using the knob. Turning SLOW Turning FAST Teletext will switch in single numbers Teletext will switch in numbers of 100 NOTE: You are not able to enter teletext numbers. ARD 100 ARD Text TT 317 WM-Vergabe: Nun keine Untersuchung Plusminus: u.a zu Atomausstieg USA Reise: Merkel trifft Obama Teletext Manuell Sturm der Liebe Tagesschau UT Sportschau live Fig.98 Fig.99 26

28 EPG Electronic Program Guide While watching press CONTROL > EGP (Fig. 100). NOTE: The display of EPG information could take a while. The channels will be refreshed step by step. EPG information can only be displayed if available. EP G ZDF Manuell Program List 2011/6/17 08:20: Das Erste 0020 Tele QVC 0022 DAS VIERT 0023 Channel21/E 0024 RTL HH SH 0025RTL SRTL Programminformation Fig.100 Fig.101 MP3 Music USB-memory/ HDD (FAT 32) needs to be connected to the USB connection. Select source > scroll down to > 99 USB-AUDIO >Select 99 USB-AUDIO > Record 99 Setup 99 USB-Audio 99 USB-Video Fig.102 Push knob AGAIN > >Select DIRECTORY or MUSIC FILE for playing (Fig. 103) Herbert Grönemeyer 22 Jennifer Lopez 23 Bon Jovi 24 Lady Gaga Fig

29 NOTE: With menu.. you will step back to the previous directory. Display of track information as well as interpret (Fig. 104) 00:10/04:03 Er gehört zu mir Marianne Rosenberg Music Fig.104 Manual selecting of music files While listening to the music press the buttons CONTROL > SEEK DOWN or SEEK UP. While using the knob the next or previous file can be selected (Fig. 105). ProSieben Sender vor Manuell Fig.105 Music fast forward/ fast backward While listening to the music press the buttons CONTROL > MANUAL DOWN or MANUAL UP. While using the knob the needed speed can be selected (Fig. 106). 2x 4x 8x 20x ProSieben Manuell vor Manuell Fig

30 Video USB-memory/ HDD (FAT 32) needs to be connected to the USB connection. Select source > scroll down to > 99 USB-VIDEO > selecting > Push knob AGAIN > > Select DIRECTORY or VIDEO FILE for playing (Fig. 108) Record 99 Setup 99 USB-Audio 99 USB-Video Titanic Fight Club.. Forrest Gump Der Pate II Fig.107 NOTE: With menu.. Fig.108 you will step back to the previous directory. Manual selecting of video files While watching video press the buttons CONTROL > SEEK DOWN or SEEK UP. While using the knob the next or previous video file can be selected. (Fig. 109). ProSieben Sender vor Manuell NOTE: Fig.109 Only video files within the same directory can be selected. 29

31 Video fast forward/ fast backward While watching video press the buttons CONTROL > MANUAL DOWN or MANUAL UP. While using the knob the needed speed can be selected (Fig. 110). 2x 4x 8x 20x ProSieben Manuell vor Manuell Fig.110 Setup Select source > scroll down to > 99 SETUP > selecting The following settings can be done (Fig. 112) Region & Language Selecting region + language Autoscan search for available channels Vol+ volume up Vol- volume down Aspect Ratio selecting picture size Reset restart of the FISCUBE device Exit Setup 99 Record Region&Langu 99 Setup 99 USB-Audio Autoscan Vol + 99 USB-Video Vol - Fig.111 Fig

32 Settings Within the mode press the SETUP button. The following settings can be done (Fig. 114) Brightness/ Contrast/ Color Helligkeit Kontrast Farbe Tint Mehrkanal -Norm Fig.113 Fig.114 Example Brightness Setup Helligkeit min max Fig.115 Aspect Ratio In case the image is cut please select the menu 99-SETUP > ASPECT RATIO and choose the suitable picture size (available from FISCUBE software-index 1.17). Exit Setup Region&Langu 4:3 16:9 OFF Aspect Ratio Fig.116 Fig

33 Operating instruction MMI 3G Push the MEDIA button -Tuner needs to be selected (Fig. 119). Fig.118 Fig.119 Channel list Single channels can be selected of the channel list by using the knob (Fig. 120). Programme WDR Köln kabel eins N24 ProSieben SAT.1 Fig.120 Manual channel selection 1. Option: Press the buttons CONTROL > CH. While using the knob you can switch between the single channels (Fig. 121) 2. Option: Press the buttons CONTROL > Symbol or. While using the knob you can switch between the single channels (Fig. 122). ProSieben ProSieben CH Manuell Fig.121 Manuell 32 Fig.122

34 Recording USB-memory/ HDD (FAT 32) needs to be connected to the USB connection. Select source > scroll down to > 99 RECORD. > Select 99 RECORD in order to START recording. During recording a REC symbol will be displayed (Fig. 124). Programme Record 99 Setup 99 USB-Audio 99 USB-Video REC Fig.123 Fig.124 Select 99 RECORD again in order to STOP recording. The record will be stored within directory RECORDED_. Playing records Select source > scroll down to > 99 USB-VIDEO > selecting Push knob AGAIN > > Select directory RECORDED_ > Push knob AGAIN > > Select the recorded file you want to play (Fig. 127). Programme Programme Record 99 Setup 99 USB-Audio Video 1 Video 2 99 USB-Video Recorded_ Fig.125 Fig.126 Programme Aufnahme 1 Aufnahme 2 Aufnahme 3 Fig

35 Store channels as a favorite Select channel and press MEMORY. Select a suitable position and confirm by using the knob again (Fig. 129). Speicher Speicher Programme N24 speichern 1: 2: Hier N24 speichern 3: 4: 5: WDR Köln kabel eins N24 ProSieben SAT.1 Fig.128 Fig.129 Teletext TXT While watching press CONTROL > TT (Fig. 130). Select a teletext site by using the knob. Turning SLOW Turning FAST Teletext will switch in single numbers Teletext will switch in numbers of 100 NOTE: You are not able to enter teletext numbers. ProSieben 100 ARD Text TT Sturm der Liebe Tagesschau UT Sportschau live WM-Vergabe: Nun keine Untersuchung Plusminus: u.a zu Atomausstieg USA Reise: Merkel trifft Obama Teletext Manuell Fig.130 Fig

36 EPG Electronic Program Guide While watching press CONTROL > EGP (Fig. 132). NOTE: The display of EPG information could take a while. The channels will be refreshed step by step. EPG information can only be displayed if available. EPG ProSieben ZDF Serie 15:30 3sat 16:45 Spielfilm 17:30 EPG Programminfos Manuell Manuell Fig.132 MP3 Music USB-memory/ HDD (FAT 32) needs to be connected to the USB connection. Select source > scroll down to > 99 USB-AUDIO >Select 99 USB-AUDIO > Programme Record 99 Setup 99 USB-Audio 99 USB-Video Fig.134 Push knob AGAIN > >Select DIRECTORY or MUSIC FILE for playing (Fig. 135). Programme.. 21 Herbert Grönemeyer 22 Jennifer Lopez 23 Bon Jovi 24 Lady Gaga Fig Fig.133

37 NOTE: With menu.. you will step back to the previous directory. Display of track information as well as interpret (Fig. 136) Programme 00:10/04:03 Er gehört zu mir Marianne Rosenberg Music Fig.136 Manual selecting of music files While listening to the music press CONTROL > Symbol previous file can be selected (Fig. 137). or. While using the knob the next or ProSieben Manuell Fig.137 Music fast forward/ fast backward While listening to the music press CONTROL > CH. While using the knob the needed speed can be selected (Fig. 138). 2x 4x 8x 20x ProSieben CH Manuell Fig

38 Video USB-memory/ HDD (FAT 32) needs to be connected to the USB connection. Select source > scroll down to > 99 USB-VIDEO > selecting > Push knob AGAIN > > Select DIRECTORY or VIDEO FILE for playing (Fig. 140). Programme Programme.. Forrest Gump Der Pate II Titanic Fight Club Record 99 Setup 99 USB-Audio 99 USB-Video Fig.139 NOTE: With menu.. Fig.140 you will step back to the previous directory. Manual selecting of video files While watching video press CONTROL > Symbol previous video file can be selected (Fig. 141). or. While using the knob the next or ProSieben Manuell NOTE: Fig.141 Only video files within the same directory can be selected. 37

39 Video fast forward/ fast backward While watching video press CONTROL > CH. While using the knob the needed speed can be selected (Fig. 142). 2x 4x 8x 20x ProSieben CH Manuell Fig.142 Setup Select source > scroll down to > 99 SETUP > selecting The following settings can be done (Fig. 144) Region & Language Selecting region + language Autoscan search for available channels Vol+ volume up Vol- volume down Aspect Ratio selecting picture size Reset restart of the FISCUBE device Programme Programme Record Exit Setup Region&Langu Autoscan Vol + Vol - 99 Setup 99 USB-Audio 99 USB-Video Fig.143 Fig

40 Settings Within the mode press the SETUP button. The following settings can be done (Fig. 146) Brightness/ Contrast/ Color Setup Helligkeit Kontrast Farbe Tint Mehrkanal -Norm Fig.145 Fig.146 Example Brightness Setup Helligkeit min Manuell max Fig.147 Aspect Ratio In case the image is cut please select the menu 99-SETUP > ASPECT RATIO and choose the suitable picture size (available from FISCUBE software-index 1.17). Programme Programme Exit Setup Region&Langu 4:3 16:9 OFF Aspect Ratio Fig.148 Fig

41 Operating instruction MMI 3G Plus Push the MEDIA button -Tuner needs to be selected (Fig. 151). Quelle Jukebox Leer Leer Nicht verbunden Tuner Fig.150 Fig.151 Channel list Single channels can be selected of the channel list by using the knob (Fig. 152). Speicher Quelle ZDF 3sat Neo/KiKa ZDFinfokanal Bayerisches FS MDR Fernsehen Einstellungen Funktionen Fig.152 Manual channel selection Select menu FUNCTIONS. While using the options SEEK DOWN or SEEK UP you can switch between the single channels (Fig. 153). Symbol 0:00 0:00 Phoenix Phoenix VOR ORT 0:00 0:00 VOR ORT EPG EPG Suchlauf zurück Suchlauf vor Funktionen Funktionen Fig.153 Fig

42 Recording USB-memory/ HDD (FAT 32) needs to be connected to the USB connection. Select source > scroll down to > 99 RECORD. > Select 99 RECORD in order to START recording. During recording a REC symbol will be displayed (Fig. 156). Speicher Quelle ZDF 3sat Neo/KiKa Record 99 Setup REC Einstellungen Funktionen Fig.155 Fig.156 Select 99 RECORD again in order to STOP recording. The record will be stored within directory RECORDED_. Playing records Select source > scroll down to > 99 USB-VIDEO > selecting Push knob AGAIN > > Select directory RECORDED_ > Push knob AGAIN > > Select the recorded file you want to play (Fig. 159). Speicher Quelle Speicher Record 99 Setup.. Video 1 99 USB-Audio Video 2 99 USB-Video Recorded_ Einstellungen Funktionen Funktionen Fig.157 Speicher Einstellungen Fig.158 Quelle.. Aufnahme 1 Aufnahme 2 Aufnahme 3 Funktionen Quelle Einstellungen Fig

43 Store channels as a favorite Select the menu FUNCTIONS. Select STORE CHANNEL. Select a suitable position and confirm by using the knob again (Fig. 161). Speicher 0:00 0:00 Phoenix 1 VOR ORT 2 EPG Sender speichern 3 Phoenix hier speichern 4 5 Funktionen Fig.160 Fig.161 Teletext TXT While watching press FUNCTIONS > TELETEXT (Fig. 162). Select a teletext site by using the knob. Turning SLOW Turning FAST Teletext will switch in single numbers Teletext will switch in numbers of 100 NOTE: You are not able to enter teletext numbers. ARD 100 0:00 0:00 ARD Text Sturm der EPG Teletext Sturm der Liebe Tagesschau UT Sportschau live WM-Vergabe: Nun keine Untersuchung Plusminus: u.a zu Atomausstieg 604 USA Reise: Merkel trifft Obama Funktionen Fig.162 Fig

44 EPG Electronic Program Guide While watching press FUNCTIONS > EGP (Fig. 164). NOTE: The display of EPG information could take a while. The channels will be refreshed step by step. EPG information can only be displayed if available. Speicher Quelle ZDF 0:00 0:00 Phoenix Serie VOR ORT 15:30 EPG 3sat EPG 16:45 Spielfilm 17:30 EPG Funktionen Funktionen Einstellungen Fig.164 Fig.165 MP3 Music USB-memory/ HDD (FAT 32) needs to be connected to the USB connection. Select source > scroll down to > 99 USB-AUDIO >Select 99 USB-AUDIO > (Fig. 167). Speicher Quelle Speicher WDR Köln Record.. 99 Setup 22 Jennifer Lopez 99 USB-Audio 23 Bon Jovi 99 USB-Video 24 Lady Gaga Quelle 21 Herbert Grönemeyer Einstellungen Funktionen Funktionen Fig.166 NOTE: With menu.. Einstellungen Fig.167 you will step back to the previous directory. Display of track information as well as interpret (Fig. 168) 00:10/04:03 Er gehört zu mir Hitmix Marianne Rosenberg Music Fig

45 Manual selecting of music files While listening to the music press FUNCTIONS > SEEK DOWN or SEEK UP in order to select the next or previous music file (Fig. 169). Symbol 0:00 0:00 Phoenix VOR ORT EPG Suchlauf zurück Funktionen Fig.169 Video USB-memory/ HDD (FAT 32) needs to be connected to the USB connection. Select source > scroll down to > 99 USB-VIDEO > selecting > Push knob AGAIN > > Select DIRECTORY or VIDEO FILE for playing (Fig.171). Speicher Quelle Speicher Record 99 Setup Forrest Gump 99 USB-Audio Der Pate II 99 USB-Video Titanic Quelle.. Fight Club Funktionen Einstellungen Funktionen Fig.170 NOTE: With menu.. Einstellungen Fig.171 you will step back to the previous directory. 44

46 Manual selecting of video files While watching video press FUNCTIONS > SEEK DOWN or SEEK UP in order to select the next or previous video file (Fig. 172). Symbol 0:00 0:00 Phoenix VOR ORT EPG Suchlauf zurück Funktionen Fig.172 NOTE: Only video files within the same directory can be selected. Setup Select source > scroll down to > 99 SETUP > selecting The following settings can be done (Fig. 174) Region & Language Selecting region + language Autoscan search for available channels Vol+ volume up Vol- volume down Aspect Ratio selecting picture size Reset restart of the FISCUBE device Speicher Quelle Speicher ARD Exit Setup WDR Köln Region & Language Record Autoscan 99 Setup Vol 99 USB-Audio Reset Funktionen Quelle Vol + Einstellungen Funktionen Fig.173 Einstellungen Fig

47 Settings Within the mode press the SETUP button. The following settings can be done (Fig. 176) Brightness/ Contrast/ Color Example Brigtness Einstellungen Helligkeit Helligkeit Kontrast Farbe Tint Mehrkanalton -Norm min max Einstellungen Einstellungen Fig.175 Fig.176 Aspect Ratio In case the image is cut please select the menu 99-SETUP > ASPECT RATIO and choose the suitable picture size (available from FISCUBE software-index 1.17). Speicher Quelle Speicher Exit Setup 4:3 Region & Language 16:9 Quelle OFF Aspect Ratio Funktionen Einstellungen Funktionen Fig.177 Einstellungen Fig

48 Additional video input 2G/ 3G/ 3GPlus Note: No processing of audio signals only video signals Remove the housing of the 18-pole connector of the FISCUBE loom. Integrate the single PIN s of the RCA -connector (Kufatec article-id 35570) (Fig. 179). PIN 2 Video ground (Black) PIN 1 Video (Yellow) The video source needs to be selected manually through the AV source on the MMI panel. NOTE: No auto switch available by choosing the rear gear. Quelle Jukebox Leer Leer Nicht verbunden Tuner AV Externer AV Eingang Fig.179 Fig.180 Video output For connecting to additional screens within the vehicle: e.g. Head rest screens, Overhead screens NOTE: No processing of audio signals ONLY VIDEO signals Join the adapter article-id with the FAKRA video loom of the FISCUBE wiring. The RCA connector can connected to an additional screen. NOTE: Depending on the number of additional screens a video booster may be required. Fig

49 Connection in case of factory fitted analog MMI 2G For vehicles with factory fitted analog tuner NOTE: Not needed for MMI 3G/ 3G Plus Location analog Tuner The tuner is located with the infotainment rack of the vehicle (Fig. 182). Item number (Fig. 183). Fig.182 Fig.183 Factory fitted analog tuner needs to be removed. Join wiring with the connections of the factory fitted -Tuner. Tuner connector Red FAKRA GREEN Fig.184 Fig.185 Fig.186 Join the 18-pole connector of the loom as well as the original fiber optical connector ( tuner) to the interface (Fig. 186). 48

50 Replacement Displayinterface NOTE: before replacing the displayinterface all MMI components needs to be updated to the latest software index. Please get in contact with your local Audi dealer. Neede update CD Model CD-part number A6 4F, A8 4E, Q7 4L 4L A4 8K, A5 8T 8K Procedure Disconnect battery replace interface connect battery again Turn ignition on remove component protection (Get in contact with your local Audi dealer online connection is required) Address 07 remove component protection (In some cases the coding machine is asking a blocking time These time needs to be elapsed completely) Additional coding Address 07 Country code, Vehicle Note down the values of the old interface Copy the values into the new interface Additional adaption channels Channel 01 MMI device list (ACC, AAS, PDC, MFSW, TPMS, RVC) Channel 02 Options within CAR menu (Left hand drive, battery status) Channel 11 Additional MMI features (logbook, clima comfort, aux heating) Channel 12 Phone version (1 for PR-Nr. 9ZW for PR-Nr. 9ZF) Channel 13 Protocol setting: 0 = A6, A8, Q7 / 8191 = A4 8K, A5 8T Channel 111 MMI start for activating the configurated values NOTE: Kufatec GmbH & Co. KG has got no influence in deleting the component protection. In case it is not possible to delete the protection please get in contact with info@kufatec.de. 49