Proffessional Quadraphonic DJ Mixer OWNER'S MANUAL VESTAX CORPORATION. VESTAX America. VESTAX (Europe)Ltd.

Transcription

1 Proffessional Quadraphonic DJ Mixer OWNE'S MANUA VESTAX COPOATION VESTAX America VESTAX (Europe)td.

2 CONGATUATIONS Thank you for purchasing the VESTAX, Professional Quadraphonic DJ Mixer. Please read this owner's manual carefully before you start to use your mixer in order to fully understand all of the special features. C A U T I O N IMPOTANT SAFEGUADS FEATUES 3 FUNCTIONS 4 HOW TO CHANGE THE FADE UNIT 8 CONNECTION DIAGAM 9 CHAIN CONNECTION 0 BOCK DIAGAM I.S.P MODE 3 SPECIFICATIONS 4 ISK OF EECTIC SHOCK DO NOT OPEN CAUTl0N TO EDUCE THE lsk OF EECTlC SHOCK DO NOT EMOVE COVE O BACK NO USE-SEVICEABE PATS INSIDE EFE SEVlCING T0 QUAIFIED SEVlCE PESONNE The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to consitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance T0 EDUCE THE ISK 0F FIE 0 EECTlC SHOCK DO NOT EXPOSE THIS APPIANCE T0 AIN 0 M0ISTUE

3 IMPOTANT SAFEGUADS EAD BEFOE OPEATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.. ead instructions-all the safety and operating instructions should be read before the appliance is operated.. etain instructions-the safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. 5. Cleaning-Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6. Attachments-Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. Water and Moisture-Do not use this product near water-for example, near a dath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. Accessories-Do not place this product on an unstable cart, stand, tripod, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart,. stand, tripod, bracket, or table recommended by the manufacturer, or sold with product. Any mounting of the appliance should follow the manufacturer's instructions, and sholud use a mounting accessory recommended by the manufacturer. 9. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 0. Power sources-this product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.. ightning-for added protection for this product during lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.. Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 3. Object and iquid Entry-Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 4. Servicing-Do not attempt to service product yourself as opening or removing covers may expose you to dangerrous voltage or other hazards. efer all servicing to qualified sersonnel.

4 5. Damage equiring Service-Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product dose not operate normally by following the operating instructions. Adjust only those controls that are coverd by the operating instructions as an improper adjustment of other, controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. If the product has been dropped or cabinet has been damaged. f. When the product exhibits a distinct change in perfromance-this indicates need for service. 6. eplacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characterristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards. 7. Safety Check-Upon completion of any service or repairs to product, ask the service technician to perfrom sefety checks to determine that the product is in proper operating condition. 8. Carts and Stands-The appliance should be used only with a cart stand that is recommended by manufacturer. 9. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. FEATUES The world's first quadraphonic (4channel) output allows DJs to expand their performance to 3D level. Q-stick controls the dimension of each input source amongst four speakers. The beats and scratches fly around the room front, back, left and right. Effect send volume controls are provided to each program. Effect return can be assigned to each program or the master enabling various flying effects. Effect return is also equipped with a dedicated two band equalizer. Master trim volume lets DJs "Crab Scratch" on master fader. Crossfader and Inputfader status (reverse or normal) is indicated in meter section. Input jacks are provided specially only for "SESSION IN" and "" which is required by I.S.P. A 3-band EQ is provided on each program. The adjustment range(+6db to -4dB) enables equalization and frequency elimination. Vestax invented the crossfader reverse switch and curve contorol and provided this feature for input faders as well. All faders are "photo coupler" to provide quicker response and longevity. Master / Cue select switch is provided to enable monitoring of cue source or master output signal. Master output is equipped with balanced /4 inch connectors for accurate sound integrity and durability. 3

5 FUNCTIONS TOP PANE SECTION EFFECT PGM PGM SEND ETUN GAIN PGM EV NOMA GAIN EVE TIM MIN MAX MIN MAX MIN MAX EVESE MIN MAX O PGM TN EQ db EFFECT TN PGM HI EFT +6-4 db O MID HI MIN EVE EQ. EFFECT SEND Q4 - STICK MAX I.F.- EVESE C.F. POWE EQ O MID HI db I.F.- MIN EFFECT SEND MAX Q4 - STICK ON OFF ON 6 IGHT PGM db METE EFT EVE OFF MIN MIN MAX SESSION MIX IGHT MAX MAX MIN PGM MONITO SEECT PGM CUE MONITO EVE MONITO

6 q EFFECT SEND VOUME Adjusts the output level of the EFFECT SEND. w EFFECT ETUN VOUME Adjusts the input level from the EFFECT ETUN. e EFFECT ETUN EQUAIZE HI and O frequency adjustment of effects signal. r EFFECT ETUN ASSIGN SWITCH The switch selects return point of effects. PGM Assigns effects to the Q-stick on PGM. PGM Assigns effects to the Q-stick on PGM. Assigns effects to pre-master fader. t POGAM GAIN VOUME Adjusts the input level of each program. The INPUT EVE METE (!8) should be at 0dB when the INPUT FADE (!9) is at 7 or 8 position. y 3 BAND EQUAIZE Adjusts HI, MID and O frequencies on each program. u POGAM EFFECT SEND VOUME Adjusts the send level for each program individually. When this volume is minimum, the same effect is off. i POGAM EVESE SWITCH Switches PGM and simultaneously. o TIM VOUME Trim adjustment for master level fader.!0 FADE Adjusts overall master output level.! SESSION MIX VOUME Adjusts the input level of SESSION IN JACKS (#5, #6).! MONITO SEECT SWITCH This allows monitoring of the OUT (#,#) or the CF MONITO (@).!3 Q-STICK ON/OFF SWITCH When this switch is on, the Q-stick functions. When this switch is off, the Q-stick does not function.!4 Q-STICK(Quadraphonic Stick) Controls the volume sent to the four speakers or zones.!5 METE SEECT SWITCH Selection for ED to represent each program or the level of the master output.!6 POWE ED Illuminates when power is on.!7 FADE EVESE ED Illuminates when respective faders are in reverse mode.!8 ED EVE METE Displays level of signal for each program or master out (determined by METE SEECT SWITCH (!5).!9 IF (INPUT FADE) This faders controls level of input signal for each program. This fader is easily replaced by user. Use IF-07PCV or IF-07PO as replacements. See "HOW TO CHANGE THE FADE CF (COSS FADE) Used to mix sound between PGM and, also detachable and easily replaced with CF-05PCV or MONITO EVE FADE Controls level in CF MONITO Crossfades signal to be monitored from each program. 5

7 PANE SECTION PGM COSS FADE PGM I.F. EV. C.F. EV. I.F. EV. NOMA NOMA NOMA EVESE EVESE EVESE PHONES PHONES 7 8 CUVE CUVE CUVE 5 6 IF EVESE SWITCH everses the action of the inputfader by making the zero point top instead of bottom. everse mode is indicated in ED CF EVESE SWITCH everses the action of the crossfader by switching PGM and. everse mode is indicated in ED IF CUVE SEECT VOUME Adjusts the input fader curve for steep or gentle CF CUVE SEECT VOUME Determines the slope characteristics of the crossfader's curve from steep to gradual. E V E 3 POSITION POSITION otate clockwise this volume, C.F curve changes like a chart ( 3 ) fig.b COSS FADE CUVE POSITION E V E MINI HEADPHONE JACK [ 3.5 ] Connect headphones with /8" mini headphone HEADPHONE JACK [ 6.3 ] Connect headphones with a standard /4" stereo plug. POSITION otate clockwise this volume, I.F curve changes like a chart ( 3 ) fig.a INPUT FADE CUVE 6

8 PANE SECTION WANING;SHOCK HAZAD-DO NOT OPEN. AVIS;ISQUE DE CHOC EECTIQUE -NE PAS OUVI. SUB SESSION IN AUX SEND ISK OF EECTIC SHOCK. DO NOT OPEN SEIA NO. MADE IN JAPAN POWE AC V AUX TN GND POWE SWITCH Power for mixer, on status indicated by POWE ED(!6) on top panel; should be turned on after all connections are made. Note As a general rule for protection, the amp should be turned on last and turned off first. #0 AC POWE JACK Connect AC ADAPTO (AC-A) in here before switching on power. Note UNAUTHOIZED POWE ADAPTOS MAY CAUSE HAM TO UNIT. # OUT JACK- [/4 inch TS balanced] Main output jacks for front left and front right speaker zones. Connect to power amp or crossover. # OUT JACK- [/4 inch TS balanced] Main output jacks for rear left and rear right speaker zones. Connect to power amp or crossover. Note These connectors are Tip=hot, ing=cold, Sleeve=ground. HOT COD GND #3 SUB OUT JACK- [/4 inch PHONE JACK unbalance] Sub output jack for front left and front right speaker zone. Unbalanced connectors at -4dBm for monitoring etc. #4 SUB OUT JACK- [/4 inch PHONE JACK unbalance] Sub output jack for rear left and rear right speaker zone. Unbalanced connectors at -4dBm for monitoring etc. #5 SESSION IN JACK- [/4 inch PHONE JACK] Allows front /4 inch chain connection with multiple mixers. #6 SESSION IN JACK- [ /4 inch PHONE JACK ] Allows rear /4 inch chain connection with multiple mixers. Note See "CHAIN CONNECTION DIAGAM" of page 0. #7 AUX SEND JACK [/4 inch PHONE JACK ] Connect to the input of external effects. (delay, reverb etc.) #8 AUX ETUN JACK [/4 inch PHONE JACK] Connect to the output of external effects. (delay, reverb etc.) #9 PUT JACK [ CA JACK ] This input for turntables with MM cartridges only. $0 GOUND(GND) TEMINA The grounding lugs for turntables. Ground for phono circuit necessary to avoid hum. fig.c T..S JACK 7

9 HOW TO CHANGE THE FADE UNIT Note Use a plus driver fitting screw. Caution: When you change any parts, do not loose the screws with marking. HOW TO EMOVE THE TOP PANE q emove each fader knobs and 4 screws which fix the top panel. w emove the top panel. Main panel Top panel Driver Knob HOW TO CHANGE THE FADE UNIT q emove the two screws on the fader panel. w emove the fader unit from position in mixer. e Carefully remove the multi-cable connector from fader unit. r Attach multi-cable connector to new fader unit. t Position the fader unit carefully and secure with screws. Driver Insert the multi-cable connector HOW TO CHANGE THE Q-STICK UNIT q emove the three screws on the Q-stick panel. w emove the Q-stick unit from position in mixer. e Carefully remove the multi-cable connector from Q-stick unit. r Attach multi-cable connector to new Q-stick unit. t Position the Q-stick carefully and secure with screws. Insert the multi-cable connector QS-07ISP 8

10 WANING;SHOCK HAZAD-DO NOT OPEN. AVIS;ISQUE DE CHOC EECTIQUE -NE PAS OUVI. ISK OF EECTIC SHOCK. DO NOT OPEN CONNECTION DIAGAM CONNECTION (EXAMPE) SPEAKE SPEAKE AMPIFIE TUN TABE INE IN to OUT- TUN TABE ED GND OUTPUT PMC-07Pro PANE SUB SESSION IN AUX SEND ED to GND OUTPUT to GND SEIA NO. MADE IN JAPAN POWE to PHONO ED AC V AUX TN GND to PHONO to AUX TN to OUT- ED INE IN to AUX SEND INPUT OUTPUT EFFECTO AMPIFIE SPEAKE SPEAKE 9

11 ED ED WANING;SHOCK HAZAD-DO NOT OPEN. AVIS;ISQUE DE CHOC EECTIQUE -NE PAS OUVI. SUB SESSION IN AUX SEND ISK OF EECTIC SHOCK. DO NOT OPEN WANING;SHOCK HAZAD-DO NOT OPEN. AVIS;ISQUE DE CHOC EECTIQUE -NE PAS OUVI. SUB SESSION IN AUX SEND ISK OF EECTIC SHOCK. DO NOT OPEN WANING;SHOCK HAZAD-DO NOT OPEN. AVIS;ISQUE DE CHOC EECTIQUE -NE PAS OUVI. SUB SESSION IN AUX SEND ISK OF EECTIC SHOCK. DO NOT OPEN SEIA NO. SEIA NO. SEIA NO. AC V AUX TN GND MADE IN JAPAN POWE AC V AUX TN GND MADE IN JAPAN POWE AC V AUX TN GND CHAIN CONNECTION DIAGAM CHAIN CONNECTION When multiple mixers are used, the OUT of one mixer is connected to the SESSION IN of another.the volume is adjusted by the SESSION MIX VOUME (!). EXAMPE Chain connection of more than one TO AMPIFIE SESSION IN OUT SESSION IN OUT ED ED ED MADE IN JAPAN POWE ED ED ED ED ED TO AMPIFIE SESSION IN OUT SESSION IN OUT 0

12 EXAMPE Chain connection of and other mixers Note Chain connection with other mixers is restricted to SESSION IN (Do not use SESSION IN). TO AMPIFIE SESSION IN OUT SESSION IN OUT PUT ED ED ED ED ED WANING;SHOCK HAZAD-DO NOT OPEN. AVIS;ISQUE DE CHOC EECTIQUE -NE PAS OUVI. SUB SESSION IN AUX SEND ISK OF EECTIC SHOCK. DO NOT OPEN WANING;SHOCK HAZAD-DO NOT OPEN. AVIS;ISQUE DE CHOC EECTIQUE -NE PAS OUVI. SUB SESSION IN AUX SEND ISK OF EECTIC SHOCK. DO NOT OPEN POFESSIONA MIXING CONTOE SESSION IN INE INE MADE IN JAPAN SEIA NO. OUT AC V AUX TN GND POWE AC V OUT PHONO PHONO GND GND WANING;SHOCK HAZAD-DO NOT OPEN. AVIS;ISQUE DE CHOC EECTIQUE -NE PAS OUVI. ISK OF EECTIC SHOCK. DO NOT OPEN SUB MAIN SEIA NO. MADE IN JAPAN POWE AC V AUX TN GND SEIA NO. MADE IN JAPAN POWE ED TO AMPIFIE ED ED SESSION IN OUT ex

13 BOCK DIAGAM PGM PGM IAA IAA IAA B A EFFECT SEND EVE EFFECT SEND GAIN EQ OW MID HI GAIN EQ OW MID HI B EFFECT TN A EFFECT TN EVE EFFECT TN EQ OW HI EFFECT SEND EVE F E H G EFFECT SEND EVE EFFECT TN SEECTO PGM PGM PGM PGM C D I.F CUVE A X B A X B I.F CUVE C D I.F EVESE C.F CUVE I.F EVESE SESSION EVE SESSION IN ch (0 db) SESSION IN ch (0 db) SESSION IN ch (0 db) SESSION IN ch (0 db) TIM EVE M OUT ch (+4 db) - M OUT ch (+4 db) - M OUT ch (+4 db) - M OUT ch (+4 db) - I.F SUB OUT ch (0 db) C.F SUB OUT ch (0 db) ch C.F PGM / ch EVESE PGM SUB OUT I.F PGM / ch ch (0 db) ch PGM SUB OUT ch (0 db) MONITO C.F E F PHONES EVE CUE PHONES OUT G CUE H MONITO PHONES OUT SEECTO (MINI) PMC-07Pro ISP BOCK DIAGAM A B A B EVESE SW JOYSTICK ON/OFF SW JOYSTICK ON/OFF SW IAA VCA VCA

14 I.S.P model I.S.P Invisibl Skratch Piklz. World Champion performance DJ group I.S.P composed of Yogafrog, Q-Bert, Mixmaster Mike, D-Styles and Shortkut. I.S.P reign as world champion of Turntablists and go on breaking new ground for DJ culture. The continues in that tradition of top performance mixer and innovative ideas at ISP's request. 3

15 SPECIFICATIONS ATED INPUT MAXlMUM INPUT IMPEDANCE INPUT PHONO / CA PIN JACK -46dBv -.4dBv 56k SECTION SESSION IN / /4"PHONE JACK -6dBv.4dBv 48k ETUN IN / /4"PHONE JACK -0dBv 4dBv 8k ATED OUTPUT MAXlMUM OUTPUT OAD IMPEDANCE OUTPUT / /4" TS BAANCED 0dBv 7.5dBv 3k SECTION SUB / /4" JACK UNBAANCED -6dBv.4dBv 3k SEND OUT / /4" JACK 0dBv 4dBv 3K HEADPHONE /4"PHONE JACK 47 load 00mW FEQUENCY ESPONSE 0Hz 0 Hz POWE SUPPY ACV 000mA S/N ATIO -65dB DIMENSIONS W H D mm WEIGHT 3.5kg 4

16 Vestax Corporation JUNE.000 PMC-07Pro ISPE

17