Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Size: px
Start display at page:

Download "Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED"

Transcription

1 Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

2 THIS PAGE INTENTIONALLY LEFT BLANK

3 Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features Conversion Gain: db Image Rejection: db LO to RF Isolation: db Noise Figure:. db Input IP: dbm Lead x mm SMT Package: mm² General Description The is a compact GaAs MMIC I/Q downconverter in a leadless RoHS compliant SMT package. This device provides a small signal conversion gain of db with a noise figure of db and db of image rejection across the frequency band. The utilizes an LNA followed by an image reject mixer which is driven by an LO buffer amplifier. The image reject mixer eliminates the need for a filter following the LNA, and removes thermal noise at the image frequency. I and Q mixer outputs are provided and an external hybrid is needed to select the required sideband. The is a much smaller alternative to hybrid style image reject mixer downconverter assemblies, and is compatible with surface mount manufacturing techniques. Electrical Specifications, T A = + C, IF = MHz, LO = dbm, Vdd = V LSB [] Parameter Min. Typ. Max. Units Frequency Range, RF Frequency Range, LO -. GHz Frequency Range, IF DC -. GHz Conversion Gain (As IRM) db Noise Figure db Image Rejection dbc db Compression (Input) - dbm LO to RF Isolation db LO to IF Isolation db IP (Input) dbm Amplitude Balance [] db Phase Balance [] - deg Total Supply = dbm [] Idd Idd ma Idd [] Data taken as IRM with external IF Hybrid. [] Data taken without external hybrid, IF = MHz. [] Current is set by the external bias resistor. Idq of LO Amp = ma. - Phone: -- Fax: -- Order On-line at Application Support: Phone: -- or apps@hittite.com

4 Data Taken As IRM With External IF Hybrid, IF = MHz Conversion Gain LSB vs. Temperature Conversion Gain LSB vs. LO Drive C +C -C Image Rejection LSB vs. Temperature IMAGE REJECTION (dbc) C +C -C LO Return Loss vs. Temperature RETURN LOSS (db) dbm dbm RF Return Loss vs. Temperature RETURN LOSS (db) IF Return Loss [] RETURN LOSS (db) C +C -C C +C -C IF IF [] Data taken without external hybrid. Phone: -- Fax: -- Order On-line at Application Support: Phone: -- or apps@hittite.com -

5 Data Taken as IRM With External IF Hybrid, IF = MHz Isolations ISOLATION (db) LO/RF RF/IF LO/IF RF/IF Input IP, LSB vs. Temperature - LO/IF C +C -C NOISE FIGURE (db) Noise Figure vs. Temperature, IF Frequency = MHz Input PdB LSB vs. Temperature PdB (dbm) C + C - C Input IP, LSB vs. LO Drive.... dbm C +C -C - Phone: -- Fax: -- Order On-line at Application Support: Phone: -- or apps@hittite.com

6 Quadrature Channel Data Taken Without IF Hybrid, IF = MHz IF Bandwidth Amplitude Balance vs. LO Drive [] RESPONSE (db) IF FREQUENCY (GHz) CONVERSION GAIN RETURN LOSS PHASE BALANCE (deg) Phase Balance vs. LO Drive [] AMPLITUDE BALANCE (db) LO = LO = LO = + dbm LO = + dbm LO = - dbm LO = LO = dbm LO = [] Data taken with IF = MHz Phone: -- Fax: -- Order On-line at Application Support: Phone: -- or apps@hittite.com -

7 Data Taken as IRM With External IF Hybrid, IF = MHz Conversion Gain, USB vs. Temperature Conversion Gain, USB vs. LO Drive C +C -C Image Rejection USB vs. Temperature IMAGE REJECTION (dbc) C +C -C Input IP, USB vs. Temperature dbm dbm Input PdB, USB vs. Temperature PdB (dbm) Input IP, USB vs. LO Drive C + C - C FREQUENCY (GHz) FREQUENCY (GHz) +C +C -C dbm - Phone: -- Fax: -- Order On-line at Application Support: Phone: -- or apps@hittite.com

8 Data Taken as IRM With External IF Hybrid, IF = MHz Conversion Gain, LSB vs. Temperature Conversion Gain, LSB vs. LO Drive C +C -C Image Rejection LSB vs. Temperature IMAGE REJECTION (dbc) C +C -C Input IP, LSB vs. Temperature dbm dbm Input PdB, LSB vs. Temperature PdB (dbm) Input IP, LSB vs. LO Drive C + C - C FREQUENCY (GHz).... FREQUENCY (GHz) +C +C -C dbm Phone: -- Fax: -- Order On-line at Application Support: Phone: -- or apps@hittite.com -

9 Data Taken as IRM With External IF Hybrid, IF = MHz Conversion Gain, USB vs. Temperature Conversion Gain, USB vs. LO Drive C +C -C Image Rejection USB vs. Temperature IMAGE REJECTION (dbc) C +C -C Input IP, USB vs. Temperature dbm dbm Input PdB, USB vs. Temperature PdB (dbm) Input IP, USB vs. LO Drive C + C - C FREQUENCY (GHz) FREQUENCY (GHz) +C +C -C dbm - Phone: -- Fax: -- Order On-line at Application Support: Phone: -- or apps@hittite.com

10 MxN Spurious Outputs nlo mrf x RF =. LO =. dbm Data taken without IF hybrid All values in dbc below IF power level (LO - RF = GHz) Outline Drawing Absolute Maximum Ratings RF + dbm LO Drive Vdd +.V Channel Temperature C Continuous Pdiss (T= C) (derate. mw/ C above C). W Thermal Resistance (R TH ) (channel to package bottom). C/W Storage Temperature - to + C Operating Temperature - to + C ESD Sensitivity (HBM) Class A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS NOTES:. LEADFRAME MATERIAL: COPPER ALLOY. DIMENSIONS ARE IN INCHES [MILLIMETERS]. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.. PAD BURR LENGTH SHALL BE.mm MAXIMUM. PAD BURR HEIGHT SHALL BE.mm MAXIMUM.. PACKAGE WARP SHALL NOT EXCEED.mm.. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [] [] H RoHS-compliant Low Stress Injection Molded Plastic % matte Sn MSL XXXX [] -Digit lot number XXXX [] Max peak reflow temperature of C Phone: -- Fax: -- Order On-line at Application Support: Phone: -- or apps@hittite.com -

11 Pin Descriptions Pin Number Function Description Interface Schematic,,,,,,,,,,,, GND These pins and package bottom must be connected to RF/DC ground VDD VBIAS_RF RFIN LOIN, VDD, VDD VBIAS_LO, N/C IF IF Power supply voltage for RF Amplifier. Bypass capacitors are required. See application circuit This pin is used to set the DC current of the RF amplifier by selection of the external bias resistor. See application circuit. This pin is the RF input pin. It is AC coupled and matched to Ohms This pin is the LO input pin. It is AC coupled and matched to Ohms Power supply voltages for LO Amplifier. Bypass capacitors are required. See application circuit This pin is used to set the DC current of the LO amplifier by selection of the external bias resistor. See application circuit. These pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. This pin is DC coupled. For applications not requiring operations to DC this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary frequency range. For operation to DC, this pin must not sink / source more than ma of current or part non-function and possible failure will result. - Phone: -- Fax: -- Order On-line at Application Support: Phone: -- or apps@hittite.com

12 Typical Application Circuit pf Vdd O HYBRID RF IN ohms + Volts (Iq = ma) Vbias RF +. µf pf pf + Volts Vdd +. µf pf pf + Volts Vdd +. µf pf pf Notes:. µf capacitors can be shared. Evaluation Board is generic and handles multiple parts. Not all components or bias lines are used on the evaluation board. LO IN. -. GHz IF IF Vbias LO pf ohms (Iq ma) pf +. µf + Volts IF OUT Phone: -- Fax: -- Order On-line at Application Support: Phone: -- or apps@hittite.com -

13 Evaluation PCB List of Materials for Evaluation PCB [] Item Description J, J PCB Mount SMA RF Connector, SRI J, J PCB Mount SMA Connector, Johnson J, J DC Pins C, C, C, C, C, C pf Capacitor, Pkg. C, C, C, C, C, C pf Capacitor, Pkg. C, C. µf Capacitor, Pkg. R Ohm Resistor, Pkg. R kohm Resistor, Pkg. R Ohm Resistor, Pkg. U PCB [] Evaluation Board [] Reference this number when ordering complete evaluation PCB [] Circuit Board Material: Rogers The circuit board used in the application should use RF circuit design techniques. Signal lines should have Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. - Phone: -- Fax: -- Order On-line at Application Support: Phone: -- or apps@hittite.com

14 Notes: Phone: -- Fax: -- Order On-line at Application Support: Phone: -- or -

OBSOLETE HMC908LC5 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT. GaAs MMIC I/Q DOWNCONVERTER 9-12 GHz. Typical Applications. Functional Diagram

OBSOLETE HMC908LC5 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT. GaAs MMIC I/Q DOWNCONVERTER 9-12 GHz. Typical Applications. Functional Diagram v3.1 HMC98LC Typical Applications The HMC98LC is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Maritime & Mobile Radio Functional Diagram

More information

The Hmc869LC5 is ideal for: Point-to-Point and Point-to-Multi-Point Radio. Parameter Min. Typ. Max. Units

The Hmc869LC5 is ideal for: Point-to-Point and Point-to-Multi-Point Radio. Parameter Min. Typ. Max. Units Typical Applications The Hmc86LC is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features Electrical Specifications, T

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units v1.214 HMC163LP3E Typical Applications The HMC163LP3E is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Sensors Functional Diagram Features

More information

Features. Parameter Min. Typ. Max. Units

Features. Parameter Min. Typ. Max. Units HMCBLPE v.. -. GHz Typical Applications The HMCBLPE is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Features Conversion Gain: db Image Rejection:

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features db Conversion Gain Image Rejection:

More information

Features. Parameter Min. Typ. Max. Min. Typ. Max. Units

Features. Parameter Min. Typ. Max. Min. Typ. Max. Units v. DOWNCONVERTER, - GHz Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Maritime & Mobile Radios Features Conversion

More information

= +25 C, IF= 100 MHz, LO = +17 dbm*

= +25 C, IF= 100 MHz, LO = +17 dbm* v3.514 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Wide IF Bandwidth: DC - 3.5

More information

Features. Parameter Min. Typ. Max. Units

Features. Parameter Min. Typ. Max. Units Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Features Conversion Gain: db Image Rejection: dbc Input Third-Order

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v4.414 Typical Applications Features

More information

= +25 C, IF= 100 MHz, LO = +15 dbm*

= +25 C, IF= 100 MHz, LO = +15 dbm* v3.514 Typical Applications Features The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Digital Radio VSAT Functional Diagram Wide IF Bandwidth: DC - 3.5 GHz Image Rejection: 35 db LO to RF

More information

= +25 C, IF= 100 MHz, LO = +15 dbm*

= +25 C, IF= 100 MHz, LO = +15 dbm* v3.514 HMC52LC4 6-1 GHz Typical Applications Features The HMC52LC4 is ideal for: Point-to-Point and Point-to-Multi-Point Radio Digital Radio VSAT Functional Diagram Wide IF Bandwidth: DC - 3.5 GHz Image

More information

= +25 C, IF= 100 MHz, LO = +15 dbm*

= +25 C, IF= 100 MHz, LO = +15 dbm* v4.514 HMC62LC4 Typical Applications The HMC62LC4 is ideal for: Point-to-Point Point-to-Multi-Point Radio WiMAX & Fixed Wireless VSAT Functional Diagram Features General Description Electrical Specifications,

More information

Features. = +25 C, As a Function of LO Drive & Vdd. IF = 1 GHz LO = -4 dbm & Vdd = +4V

Features. = +25 C, As a Function of LO Drive & Vdd. IF = 1 GHz LO = -4 dbm & Vdd = +4V v4.414 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Integrated LO Amplifier: -4

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.514 MIXER, 2.5-7. GHz Typical

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.514 MIXER, 5.5-14. GHz Typical

More information

OBSOLETE HMC215LP4 / 215LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram

OBSOLETE HMC215LP4 / 215LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram v1.111 LO AMPLIFIER, 1.7-4. GHz Typical Applications The HMC215LP4 / HMC215LP4E is ideal for Wireless Infrastructure Applications: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM &

More information

Features. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

Features. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units v3.514 MIXER, 5.5-14. GHz Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Functional Diagram Features Passive Double Balanced

More information

Features. = +25 C, IF = 100 MHz, LO = 0 dbm, Vcc1, 2, 3, = +5V, G_Bias = +3.5V*

Features. = +25 C, IF = 100 MHz, LO = 0 dbm, Vcc1, 2, 3, = +5V, G_Bias = +3.5V* v3.1 LO AMPLIFIER, 7 - MHz Typical Applications The HMC684LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +32

More information

Features. = +25 C, Vdd = +4.5V, +4 dbm Drive Level

Features. = +25 C, Vdd = +4.5V, +4 dbm Drive Level Typical Applications The is ideal for: Clock Generation Applications: SONET OC-192 & SDH stm-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Sensors Features High Output Power: +21

More information

Features OBSOLETE. = +25 C, IF = 1.45 GHz, LO = +13 dbm [1]

Features OBSOLETE. = +25 C, IF = 1.45 GHz, LO = +13 dbm [1] v2.614 Typical Applications The HMC412AMS8G / HMC412AMS8GE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Functional Diagram Features General Description Parameter Min. Typ. Max. Units Frequency

More information

Features. = +25 C, IF = 0.5 GHz, LO = +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

Features. = +25 C, IF = 0.5 GHz, LO = +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units v1.514 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Features Passive: No DC Bias Required

More information

OBSOLETE HMC422MS8 / 422MS8E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram

OBSOLETE HMC422MS8 / 422MS8E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram v4.712 Typical Applications The HMC422MS8 / HMC422MS8E is ideal for: MMDS & ISM Wireless Local Loop WirelessLAN Cellular Infrastructure Functional Diagram Electrical Specifications, T A = +2 C Features

More information

HMC581LP6 / 581LP6E MIXERS - SMT. HIGH IP3 RFIC DUAL DOWNCONVERTER, MHz. Typical Applications. Features. Functional Diagram

HMC581LP6 / 581LP6E MIXERS - SMT. HIGH IP3 RFIC DUAL DOWNCONVERTER, MHz. Typical Applications. Features. Functional Diagram Typical Applications The HMC1LP6 / HMC1LP6E is ideal for Wireless Infrastructure Applications: GSM, GPRS & EDGE CDMA & W-CDMA Cellular / 3G Infrastructure Functional Diagram Features +26 dbm Input IP3

More information

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V * Typical Applications The is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +38 dbm 8 db Conversion Loss @ 0 dbm LO Optimized

More information

HMC576LC3B MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications

HMC576LC3B MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications v2.514 Typical Applications The is suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram Features

More information

HMC412MS8G / 412MS8GE

HMC412MS8G / 412MS8GE v.91 HMC4MS8G / 4MS8GE MIXER, 9. - 15. GHz Typical Applications The HMC4MS8G / HMC4MS8GE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Features Conversion Loss: 8. db Noise Figure: 8. db

More information

Features. = +25 C, 50 Ohm System

Features. = +25 C, 50 Ohm System v1.111 47 Analog Phase Shifter, Typical Applications The is ideal for: EW Receivers Military Radar Test Equipment Satellite Communications Beam Forming Modules Features Wide Bandwidth: 47 Phase Shift Low

More information

OBSOLETE HMC423MS8 / 423MS8E MIXERS - DBL-BAL - SMT. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications.

OBSOLETE HMC423MS8 / 423MS8E MIXERS - DBL-BAL - SMT. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Typical Applications The HMC423MS8 / HMC423MS8E is ideal for: Base Stations Portable Wireless CATV/DBS ISM Functional Diagram Electrical Specifications, T A = +25 C Features Integrated LO Amplifi er w/

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com HMC148* Product Page Quick Links Last Content Update: 11/1/216 Comparable

More information

HMC814LC3B FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications

HMC814LC3B FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications Typical Applications The is ideal for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Sensors Functional Diagram Features High

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.511 Typical Applications Features

More information

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +10 dbm. IF = 70 MHz

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +10 dbm. IF = 70 MHz v1.112 HMC27AS8 / 27AS8E BALANCED MIXER,.7-2. GHz Typical Applications The HMC27AS8 / HMC27AS8E is ideal for: Base Stations Cable Modems Portable Wireless Functional Diagram Features Conversion Loss: 9

More information

HMC485MS8G / 485MS8GE. Features OBSOLETE. = +25 C, LO = 0 dbm, IF = 200 MHz*, Vdd= 5V

HMC485MS8G / 485MS8GE. Features OBSOLETE. = +25 C, LO = 0 dbm, IF = 200 MHz*, Vdd= 5V Typical Applications High Dynamic Range Infrastructure: GSM, GPRS & EDGE CDMA & W-CDMA Cable Modem Termination Systems Functional Diagram Features +34 dbm Input IP3 Conversion Loss: db Low LO Drive: -2

More information

CMD257C GHz High IP3 I/Q Mixer. Features. Functional Block Diagram. Description

CMD257C GHz High IP3 I/Q Mixer. Features. Functional Block Diagram. Description Features Functional Block Diagram Low conversion loss High IP3 Image rejection: 3 db Wide IF bandwidth Pb-free RoHs compliant 4x4 mm SMT package Description The is a high IP3 I/Q mixer in a leadless surface

More information

Features. = +25 C, As a Function of LO Drive

Features. = +25 C, As a Function of LO Drive Typical Applications v.411 The is ideal for: Basestations, Repeaters & Access Points WiMAX, WiBro & Fixed Wireless Portables & Subscribers PLMR, Public Safety & Telematics Functional Diagram Features Passive

More information

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz v.211 HMC22AMS8 / 22AMS8E Typical Applications Features The HMC22AMS8 / HMC22AMS8E is ideal for: Microwave Radios VSAT Functional Diagram Ultra Small Package: MSOP8 Conversion Loss: 8.5 db Wideband IF:

More information

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V * Typical Applications The is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +38 dbm 8 db Conversion Loss @ 0 dbm LO Optimized

More information

Features. = +25 C, 50 Ohm System

Features. = +25 C, 50 Ohm System v.211 18 Analog Phase Shifter, 2-2 GHz Typical Applications The is ideal for: EW Receivers Military Radar Test Equipment Satellite Communications Beam Forming Modules Features Wide Bandwidth: 2-2 GHz 18

More information

HMC412BMS8GE MIXER - SINGLE & DOUBLE BALANCED - SMT. Typical Applications. Features. Functional Diagram. General Description

HMC412BMS8GE MIXER - SINGLE & DOUBLE BALANCED - SMT. Typical Applications. Features. Functional Diagram. General Description HMCBMSGE v1.1 Typical Applications The HMCBMSGE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Functional Diagram Features Conversion Loss: db Noise Figure: db LO to RF Isolation: db LO to

More information

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 70 MHz

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 70 MHz Typical Applications Functional Diagram The HMC28AMS8 / HMC28AMS8E is ideal for: Base Stations PCMCIA Transceivers Cable Modems Portable Wireless Features Ultra Small Package: MSOP8 Conversion Loss: db

More information

HMC219AMS8 / 219AMS8E. Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz

HMC219AMS8 / 219AMS8E. Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz Typical Applications The HMC219AMS8 / HMC219AMS8E is ideal for: UNII & HiperLAN ISM Microwave Radios Functional Diagram Features Ultra Small Package: MSOP8 Conversion Loss: 8.5 db LO / RF Isolation: 25

More information

CMD183C GHz I/Q Mixer. Features. Functional Block Diagram. Description

CMD183C GHz I/Q Mixer. Features. Functional Block Diagram. Description Features Functional Block Diagram Low conversion loss High isolation Image rejection: 26 db Wide IF bandwidth Pb-free RoHs compliant 4x4 mm SMT package Description The CMD183C4 is a compact I/Q mixer in

More information

Features. = +25 C, Vdd = +7V, Idd = 820 ma [1]

Features. = +25 C, Vdd = +7V, Idd = 820 ma [1] Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Functional Diagram Features Saturated

More information

Features. = +25 C, IF= 100 MHz, LO = +17 dbm*

Features. = +25 C, IF= 100 MHz, LO = +17 dbm* v2.31 HMC-C44 1-23 GHz Typical Applications The HMC-C44 is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Features Wide

More information

CMD178C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

CMD178C GHz Fundamental Mixer. Features. Functional Block Diagram. Description Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description The CMD178C3 is a general purpose

More information

CMD255C GHz High IP3 Fundamental Mixer. Features. Functional Block Diagram. Description

CMD255C GHz High IP3 Fundamental Mixer. Features. Functional Block Diagram. Description Features Functional Block Diagram Low conversion loss High IP3 High isolation Wide IF bandwidth Pb-free RoHs compliant 3x3 mm SMT package Description The CMD255C3 is a general purpose double balanced mixer

More information

Features OBSOLETE. LO = +19 dbm, IF = 100 MHz Parameter

Features OBSOLETE. LO = +19 dbm, IF = 100 MHz Parameter Typical Applications The HMC351S8 / HMC351S8E is ideal for: Cellular Basestations Cable Modems Fixed Wireless Access Systems Functional Diagram Electrical Specifications, T A = +25 C Features Conversion

More information

6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A

6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A FEATURES Conversion loss: 9 db typical Local oscillator (LO) to radio frequency (RF) isolation: 37 db typical LO to intermediate frequency (IF) isolation: 37 db typical RF to IF isolation: db typical Input

More information

CMD179C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

CMD179C GHz Fundamental Mixer. Features. Functional Block Diagram. Description Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description The CMD179C3 is a general purpose

More information

CMD180C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

CMD180C GHz Fundamental Mixer. Features. Functional Block Diagram. Description CMD18C3 2-32 GHz Fundamental Mixer Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units v2.89 Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features Conversion Gain: 8 db Image Rejection:

More information

Features. = +25 C, As a Function of LO Drive. LO = +10 dbm IF = 100 MHz

Features. = +25 C, As a Function of LO Drive. LO = +10 dbm IF = 100 MHz v4.6 HMC218MS8 / 218MS8E Typical Applications The HMC218MS8 / HMC218MS8E is ideal for: Basestations, Repeaters & Access Points WiMAX, WiBro & Fixed Wireless Portables & Subscribers PLMR, Public Safety

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features Conversion Gain: 11 db Image Rejection:

More information

HMC187AMS8 / 187AMS8E. Features OBSOLETE. = +25 C, As a Function of Drive Level

HMC187AMS8 / 187AMS8E. Features OBSOLETE. = +25 C, As a Function of Drive Level v.41 DOUBLER,.8-2. GHz INPUT Typical Applications Features The HMC187AMS8(E) is ideal for: Wireless Local Loop LMDS, VSAT, and Point-to-Point Radios UNII & HiperLAN Test Equipment Functional Diagram *

More information

Features. = +25 C, IF= 100 MHz, LO= +13 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

Features. = +25 C, IF= 100 MHz, LO= +13 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units Features Passive Double Balanced Topology High LO/RF Isolation: 48 db Low Conversion Loss: 7 db Wide IF Bandwidth: DC - GHz Robust 1,000V esd, Class 1C Typical Applications The is ideal for: Point-to-Point

More information

Features. PFD Output Voltage 2000 mv, Pk - Pk. PFD Gain Gain = Vpp / 2π Rad khz 100 MHz Square Wave Ref.

Features. PFD Output Voltage 2000 mv, Pk - Pk. PFD Gain Gain = Vpp / 2π Rad khz 100 MHz Square Wave Ref. HMC98LP5 / 98LP5E Typical Applications The HMC98LP5(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet Clock Generation Functional Diagram Features Ultra

More information

SUNSTAR 微波光电 TEL: FAX: v HMC750LP4 / 750LP4E 12.5 Gbps LIMITING AMPLIFIER

SUNSTAR 微波光电   TEL: FAX: v HMC750LP4 / 750LP4E 12.5 Gbps LIMITING AMPLIFIER Typical Applications The HMC75LP4(E) is ideal for: OC-192 Receivers Gbps Ethernet Receivers Gbps Fiber Channel Receivers Broadband Test & Measurement Functional Diagram Features Electrical Specifications,

More information

HMC613LC4B POWER DETECTORS - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz

HMC613LC4B POWER DETECTORS - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz v.54 HMC6LC4B AMPLIFIER (SDLVA),. - GHz Typical Applications The HMC6LC4B is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control Circuits

More information

GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A

GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A FEATURES Conversion loss: db LO to RF isolation: db LO to IF isolation: 3 db Input third-order intercept (IP3): 1 dbm Input second-order intercept (IP2): dbm LO port return loss: dbm RF port return loss:

More information

10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B

10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B Data Sheet FEATURES Passive; no dc bias required Conversion loss 8 db typical for 1 GHz to 18 GHz 9 db typical for 18 GHz to 26 GHz LO to RF isolation: 4 db Input IP3: 19 dbm typical for 18 GHz to 26 GHz

More information

Features. = +25 C, IF = 1 GHz, LO = +13 dbm*

Features. = +25 C, IF = 1 GHz, LO = +13 dbm* v.5 HMC56LM3 SMT MIXER, 24-4 GHz Typical Applications Features The HMC56LM3 is ideal for: Test Equipment & Sensors Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Functional Diagram

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.55 Typical Applications The is

More information

CMD197C GHz Distributed Driver Amplifier

CMD197C GHz Distributed Driver Amplifier Features Functional Block Diagram Wide bandwidth High linearity Single positive supply voltage On chip bias choke Pb-free RoHs compliant 4x4 mm SMT package Description The CMD197C4 is a wideband GaAs MMIC

More information

Features. = +25 C, Vs = 5V, Vpd = 5V

Features. = +25 C, Vs = 5V, Vpd = 5V v1.117 HMC326MS8G / 326MS8GE AMPLIFIER, 3. - 4. GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional

More information

HMC958LC5 HIGH SPEED LOGIC - SMT. Typical Applications. Features. Functional Diagram. General Description

HMC958LC5 HIGH SPEED LOGIC - SMT. Typical Applications. Features. Functional Diagram. General Description Typical Applications Features The HMC958LC5 is ideal for: SONET OC-192 and 1 GbE 16G Fiber Channel 4:1 Multiplexer Built-In Test Broadband Test & Measurement Functional Diagram Supports High Data Rates:

More information

Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units

Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units Features Passive: No DC Bias Required Input IP3: +2 dbm LO/RF Isolation: 3 db Wide IF Bandwidth: DC - 8 GHz Typical Applications The is ideal for: Telecom Infrastructure Military Radio, Radar & ECM Space

More information

FMMX9004 DATA SHEET. Field Replaceable SMA IQ Mixer From 15 GHz to 23 GHz With an IF Range From DC to 3.5 GHz And LO Power of +17 dbm.

FMMX9004 DATA SHEET. Field Replaceable SMA IQ Mixer From 15 GHz to 23 GHz With an IF Range From DC to 3.5 GHz And LO Power of +17 dbm. FMMX94 Field Replaceable SMA IQ Mixer From 15 GHz to 23 GHz With an IF Range From DC to 3.5 GHz And LO Power of +17 dbm FMMX94 is an I/Q double balanced millimeter-wave mixer module that operates across

More information

1.5 GHz to 4.5 GHz, GaAs, MMIC, Double Balanced Mixer HMC213BMS8E

1.5 GHz to 4.5 GHz, GaAs, MMIC, Double Balanced Mixer HMC213BMS8E FEATURES Passive: no dc bias required Conversion loss: 1 db typical Input IP3: 21 dbm typical RoHS compliant, ultraminiature package: 8-lead MSOP APPLICATIONS Base stations Personal Computer Memory Card

More information

FMMX9002 DATA SHEET. Field Replaceable SMA IQ Mixer From 8.5 GHz to 13.5 GHz With an IF Range From DC to 2 GHz And LO Power of +19 dbm.

FMMX9002 DATA SHEET. Field Replaceable SMA IQ Mixer From 8.5 GHz to 13.5 GHz With an IF Range From DC to 2 GHz And LO Power of +19 dbm. FMMX92 Field Replaceable SMA IQ Mixer From 8.5 GHz to 13.5 GHz With an IF Range From DC to 2 GHz And LO Power of +19 dbm FMMX92 is an I/Q double balanced millimeter-wave mixer module that operates across

More information

Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units

Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units Typical Applications The is ideal for: Telecom Infrastructure Military Radio, Radar & ECM Space Systems Test Instrumentation Functional Diagram Features Wide IF Bandwidth: DC - 13 GHz Passive: No DC Bias

More information

v SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) 1-20 GHz Features Parameter Conditions Typ. Units Input Frequency Range 1-20 GHz

v SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA) 1-20 GHz Features Parameter Conditions Typ. Units Input Frequency Range 1-20 GHz HMC-C88 v.6 - GHz Features to GHz Operation Typical Applications The HMC-C88 is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control

More information

Features OBSOLETE. = +25 C, As an IRM. IF = MHz. Frequency Range, RF GHz. Frequency Range, LO

Features OBSOLETE. = +25 C, As an IRM. IF = MHz. Frequency Range, RF GHz. Frequency Range, LO v.17 Typical Applications The is ideal for: Microwave Radio & VSAT Test Instrumentation Military Radios Radar & ECM Space Functional Diagram Electrical Specifications, T A = +25 C, As an IRM Parameter

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.17 HMC55 MIXER, 11-2 GHz Typical

More information

FMMX9000 DATA SHEET. Field Replaceable SMA IQ Mixer From 4 GHz to 8.5 GHz With an IF Range From DC to 3.5 GHz And LO Power of +15 dbm.

FMMX9000 DATA SHEET. Field Replaceable SMA IQ Mixer From 4 GHz to 8.5 GHz With an IF Range From DC to 3.5 GHz And LO Power of +15 dbm. FMMX9 Field Replaceable SMA IQ Mixer From 4 GHz to 8.5 GHz With an IF Range From DC to 3.5 GHz And LO Power of +15 dbm FMMX9 is an I/Q double balanced millimeter-wave mixer module that operates across

More information

Features. = +25 C, LO = 36.1 GHz, LO = +15 dbm, LSB [1] Parameter Min. Typ. Max. Min. Typ. Max Min. Typ. Max Units

Features. = +25 C, LO = 36.1 GHz, LO = +15 dbm, LSB [1] Parameter Min. Typ. Max. Min. Typ. Max Min. Typ. Max Units v1.314 HMC116 Typical Applications The HMC116 is ideal for: Microwave Point-to-Point Radios VSAT & SATCOM Test Equipment & Sensors Military End-Use Automotive Radar Functional Diagram Features Passive:

More information

Features. = +25 C, IF = 1GHz, LO = +13 dbm*

Features. = +25 C, IF = 1GHz, LO = +13 dbm* v2.312 HMC6 MIXER, 24-4 GHz Typical Applications Features The HMC6 is ideal for: Test Equipment & Sensors Microwave Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Functional Diagram

More information

CMD GHz Fundamental Mixer

CMD GHz Fundamental Mixer Features Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Small die size Functional Block Diagram LO RF 1 2 Description The CMD177 is a general purpose double balanced

More information

* Notices. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage.

* Notices. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage. 1.7~2.7GHz High IIP3 GaAs MMIC with Integrated LO AMP Device Features +33.9 dbm Input IP3 8.3dB Conversion Loss Integrated LO Driver -2 to +4dBm LO drive level Available 3.3V to 5V single voltage MSL 1,

More information

50~100MHz. 100~210MHz C2 1nF. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage

50~100MHz. 100~210MHz C2 1nF. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage 0.7~1.4GHz High IIP3 GaAs MMIC with Integrated LO AMP Device Features +31.7 dbm Input IP3 8.8dB Conversion Loss Integrated LO Driver -2 to +2dBm LO drive level Available 3.3V to 5V single voltage MSL 1,

More information

CMD176P GHz 4-Bit Digital Phase Shifter. Features. Functional Block Diagram. Description

CMD176P GHz 4-Bit Digital Phase Shifter. Features. Functional Block Diagram. Description Features Functional Block Diagram Low phase error Low insertion loss 36 phase shift, LSB = 22.5 Single bit positive logic Pb-free RoHs compliant 4x4 QFN package Description The CMD176P4 is a GaAs MMIC

More information

Parameter Min Typ Max Units Frequency Range, RF

Parameter Min Typ Max Units Frequency Range, RF Features Low conversion loss High isolation Ultra wide IF bandwidth Passive double balanced topology Small die size Description The is a general purpose double balanced mixer die with ultra wide IF bandwidth

More information

Features. Gain Variation Over Temperature db/ C

Features. Gain Variation Over Temperature db/ C v4.3 MODULE,. - 5 GHz Features Typical Applications The Wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Gain:

More information

HMC-C078. SDLVAs. Features. Typical Applications. General Description. Functional Diagram

HMC-C078. SDLVAs. Features. Typical Applications. General Description. Functional Diagram HMC-C8 v. MODULE w/ LIMITED RF OUTPUT, - GHz Typical Applications The HMC-C8 is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control

More information

Parameter LO RF IF Min Typ Max Diode Option (GHz) (GHz) (GHz) LO drive level (dbm)

Parameter LO RF IF Min Typ Max Diode Option (GHz) (GHz) (GHz) LO drive level (dbm) Page MMIQHSM The MMIQHSM is a miniaturized, surface-mount multi-octave.7. GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and power divider. It can be used

More information

TGC2610-SM 10 GHz 15.4 GHz Downconverter

TGC2610-SM 10 GHz 15.4 GHz Downconverter Applications VSAT Point-to-Point Radio Test Equipment & Sensors -pin 5x5 mm QFN package Product Features Functional Block Diagram RF Frequency Range: 15. GHz IF Frequency: DC GHz LO Frequency: 19 GHz LO

More information

Parameter LO RF IF Min Typ Max Diode Option (GHz) (GHz) (GHz) LO drive level (dbm)

Parameter LO RF IF Min Typ Max Diode Option (GHz) (GHz) (GHz) LO drive level (dbm) MM-726HSM The MM-726HSM is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation

More information

Data Sheet. ALM MHz 915 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description.

Data Sheet. ALM MHz 915 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description. ALM-11136 870 MHz 915 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature Data Sheet Description Avago Technologies ALM-11136 is an easy-to-use GaAs MMIC Tower Mount Amplifier

More information

MAMX Sub-Harmonic Pumped Mixer GHz Rev. V1. Functional Schematic. Features. Description. Pin Configuration 1

MAMX Sub-Harmonic Pumped Mixer GHz Rev. V1. Functional Schematic. Features. Description. Pin Configuration 1 MAMX-119 Features Up or Down Frequency Mixer Low Conversion Loss: 11 db 2xLO & 3xLO Rejection: db RF Frequency: 14 - LO Frequency: 4-2 GHz IF Frequency: DC - 7 GHz Lead-Free 1.x1.2 mm 6-lead TDFN Package

More information

Features. = +25 C, LO = 50 GHz, LO = +12 dbm, USB [1] Parameter Min. Typ. Max. Units. RF Frequency Range GHz. LO Frequency Range GHz

Features. = +25 C, LO = 50 GHz, LO = +12 dbm, USB [1] Parameter Min. Typ. Max. Units. RF Frequency Range GHz. LO Frequency Range GHz Typical Applications The is ideal for: E-Band Communications Systems Test Equipment & Sensors Military End-Use Automotive Radar Functional Diagram Features Passive: No DC Bias Required Low LO Power: 12

More information

Data Sheet. ALM MHz 870 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description.

Data Sheet. ALM MHz 870 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature. Description. ALM-11036 776 MHz 870 MHz Low Noise, High Linearity Amplifier Module with Fail-Safe Bypass Feature Data Sheet Description Avago Technologies ALM-11036 is an easy-to-use GaAs MMIC Tower Mount Amplifier

More information

GaAs MMIC Double Balanced Mixer. Description Package Green Status

GaAs MMIC Double Balanced Mixer. Description Package Green Status GaAs MMIC Double Balanced Mixer MM132HSM 1. Device Overview 1.1 General Description The MM132HSM is a GaAs MMIC double balanced mixer that is optimized for high frequency applications. MM1-832HSM is a

More information

TGA2218-SM GHz 12 W GaN Power Amplifier

TGA2218-SM GHz 12 W GaN Power Amplifier Applications Satellite Communications Data Link Radar Product Features Functional Block Diagram Frequency Range: 13.4 16.5 GHz PSAT: > 41 dbm (PIN = 18 dbm) PAE: > 29% (PIN = 18 dbm) Large Signal Gain:

More information

GaAs MMIC Double Balanced Mixer

GaAs MMIC Double Balanced Mixer Page 1 The is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation and spurious

More information

TGP2109-SM GHz 6-Bit Digital Phase Shifter. Product Description. Functional Block Diagram. Product Features. Applications. Ordering Information

TGP2109-SM GHz 6-Bit Digital Phase Shifter. Product Description. Functional Block Diagram. Product Features. Applications. Ordering Information TGP219-SM Product Description The Qorvo TGP219-SM is a packaged 6-bit digital phase shifter fabricated on Qorvo s high performance.15μm GaAs phemt process. It operates over 8 to 12 GHz and provides 36

More information

MH1A. Product Features. Product Description. Functional Diagram. Applications. Specifications (1) Absolute Maximum Rating. Ordering Information

MH1A. Product Features. Product Description. Functional Diagram. Applications. Specifications (1) Absolute Maximum Rating. Ordering Information Product Features +3 dbm IIP3 RF: 1 2 MHz LO: 1 1 MHz IF: 2 MHz +1 dbm Drive Level Lead-free/green/RoHS-compliant SOIC- SMT package No External Bias Required Applications 2.G and 3G GSM/CDMA/wCDMA Optimized

More information

GaAs MMIC Double Balanced Mixer

GaAs MMIC Double Balanced Mixer Page 1 The is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation

More information

QPL GHz GaN LNA

QPL GHz GaN LNA General Description The is a wideband cascode low noise amplifier fabricated on Qorvo s 0.25um GaN on SiC production process. This cascode LNA is robust to 5W of input power with 17dB typical gain and

More information

Features. LO = +13 dbm, IF = 1 GHz Parameter. Units Min. Typ. Max. Frequency Range, RF & LO GHz Frequency Range, IF DC - 8 GHz

Features. LO = +13 dbm, IF = 1 GHz Parameter. Units Min. Typ. Max. Frequency Range, RF & LO GHz Frequency Range, IF DC - 8 GHz v.17 MIXER, 25 - GHz Typical Applications The is ideal for: LMDS Microwave Point-to-Point Radios SATCOM Functional Diagram Features Passive: No DC Bias Required Input IP3: +19 dbm LO/RF Isolation: 2 db

More information

DC-6.0 GHz 1.0W Packaged HFET

DC-6.0 GHz 1.0W Packaged HFET Features 46. dbm OIP3 @.8 GHz 1. db Gain @ 2 GHz.0 db Gain @ 6 GHz 30.0 dbm P1dB SOT-89 Package Functional Block Diagram General Description The X is a high linearity Hetrojunction Field Effect Transistor

More information

1 Watt High Linearity, High Gain InGaP HBT Amplifier. Product Description

1 Watt High Linearity, High Gain InGaP HBT Amplifier. Product Description Product Features 18 24 MHz 24.7 db Gain +3 dbm P1dB +46 dbm Output IP3 +V Single Positive Supply Internal Active Bias Lead-free/ RoHS-compliant SOIC-8 & 4xmm DFN Package Applications Mobile Infrastructure

More information