DESCRIPTION FEATURES APPLICATIONS. LTC7543/LTC8143 Improved Industry Standard Serial 12-Bit Multiplying DACs TYPICAL APPLICATION

Size: px
Start display at page:

Download "DESCRIPTION FEATURES APPLICATIONS. LTC7543/LTC8143 Improved Industry Standard Serial 12-Bit Multiplying DACs TYPICAL APPLICATION"

Transcription

1 Improved Industry Standard Serial -Bit Multiplying DACs FEATRES Improved Direct Replacement for AD754 and DAC-84 Low Cost DNL and INL Over Temperature: ±0.5LSB Easy, Fast and Flexible Serial Interface Daisy-Chain -Wire Interface for Multiple DAC Systems (LTC84) LSB Maximum Gain Error Over Temperature Eliminates Adjustment Asynchronous Clear Input for Initialization Four-Quadrant Multiplication Low Power Consumption 6-Pin PDIP and SO Packages APPLICATIONS Process Control and Industrial Automation Remote Microprocessor-Controlled Systems Digitally Controlled Filters and Power Supplies Programmable Gain Amplifiers Automatic Test Equipment DESCRIPTION The LTC 754/LTC84 are serial-input -bit multiplying digital-to-analog converters (DACs). They are superior pin compatible replacements for the AD754 and DAC-84. Improvements include better accuracy, better stability over temperature and supply variations, lower sensitivity to output amplifier offset, tighter timing specifications and lower output capacitance. An easy-to-use serial interface includes an asynchronous CLEAR input for systems requiring initialization to a known state. The LTC84 has a serial data output to allow daisychaining multiple DACs on a -wire interface bus. These DACs are extremely versatile. They can be used for -quadrant and 4-quadrant multiplying, programmable gain and single supply applications, such as noninverting voltage output and biased or offset ground mode. Parts are available in 6-pin PDIP and SO packages and are specified over the extended industrial temperature range, 40 C to 85 C., LTC and LT are registered trademarks of Linear Technology Corporation. TYPICAL APPLICATION V IN Multiplying DAC Has Easy -Wire Serial Interface 5V Integral Nonlinearity Over Temperature.0 CLOCK DATA LOAD V DD R FB STB OT SRI LTC754 LTC84 LD OT DGND AGND pf + LT 097 V OT 754/84 TA0 INTEGRAL NONLINEARITY (LSB) T A = 85 C T A = 5 C T A = 40 C DIGITAL INPT CODE 754/84 TA0

2 ABSOLTE MAXIMM RATINGS W W W V DD to AGND V to 7V V DD to DGND V to 7V AGND to DGND... V DD + 0.5V DGND to AGND... V DD + 0.5V Digital Inputs to DGND V to (V DD + 0.5V) V OT, V OT to AGND V to (V DD + 0.5V) to AGND, DGND... ±5V V RFB to AGND, DGND... ±5V Maximum Junction Temperature C Operating Temperature Range C to 85 C Storage Temperature Range C to 50 C Lead Temperature (Soldering, 0 sec) C PACKAGE/ORDER INFORMATION OT OT AGND STB 4 LD 5 NC (LTC754) 6 SRO (LTC84) SRI 7 STB 8 TOP VIEW 6 R FB 5 4 V DD CLR DGND STB4 0 STB 9 LD N PACKAGE 6-LEAD PDIP SW PACKAGE 6-LEAD PLASTIC SO WIDE T JMAX = 50 C, θ JA = 00 C/ W (N) T JMAX = 50 C, θ JA = 0 C/ W (SW) W ORDER PART NMBER LTC754GKN LTC754KN LTC754GKSW LTC754KSW LTC84EN LTC84FN LTC84ESW LTC84FSW Consult factory for Military grade parts. ACCRACY CHARACTERISTICS LTC754 V DD = 5V, = 0V, V OT = V OT = AGND = DGND =0V, T A = T MIN to T MAX, unless otherwise specified. LTC754GK LTC754K SYMBOL PARAMETER CONDITIONS MIN TYP MAX MIN TYP MAX NITS Resolution Bits INL Integral Nonlinearity (Note ) ±0.5 ±0.5 LSB (Relative Accuracy) DNL Differential Nonlinearity Guaranteed Monotonic, T MIN to T MAX ±0.5 ±0.5 LSB GE Gain Error (Note ) T A = 5 C ± ± LSB T MIN to T MAX ± ± LSB Gain Temperature Coefficient (Note ) 5 5 ppm/ C ( Gain/ Temp) I LKG Output Leakage Current (Note 4) T A = 5 C ± ± na T MIN to T MAX ±0 ±0 na Zero-Scale Error T A = 5 C ±0.006 ±0.006 LSB T MIN to T MAX ±0.06 ±0.06 LSB PSRR Power Supply Rejection Ratio V DD = 5V ±5% ±0.000 ±0.00 ±0.000 ±0.00 %/%

3 ACCRACY CHARACTERISTICS LTC84 V DD = 5V, = 0V, V OT = V OT = AGND = DGND = 0V, T A = T MIN to T MAX, unless otherwise specified. V DD = 5V, = 0V, V OT = V OT = AGND = DGND = 0V, T A = T MIN to T MAX, unless otherwise specified. LTC84E LTC84F SYMBOL PARAMETER CONDITIONS MIN TYP MAX MIN TYP MAX NITS Resolution Bits INL Integral Nonlinearity (Note ) ±0.5 ± LSB (Relative Accuracy) DNL Differential Nonlinearity Guaranteed Monotonic, T MIN to T MAX ±0.5 ± LSB GE Gain Error (Note ) T A = 5 C ± ± LSB T MIN to T MAX ± ± LSB Gain Temperature Coefficient (Note ) 5 5 ppm/ C ( Gain/ Temp) I LKG Output Leakage Current (Note 4) T A = 5 C ±5 ±5 na T MIN to T MAX ±5 ±5 na Zero-Scale Error T A = 5 C ±0.0 ±0.0 LSB T MIN to T MAX ±0.5 ±0.5 LSB PSRR Power Supply Rejection Ratio V DD = 5V ±5% ±0.000 ±0.00 ±0.000 ±0.00 %/% ELECTRICAL CHARACTERISTICS ALL GRADES SYMBOL PARAMETER CONDITIONS MIN TYP MAX NITS Reference Input R REF Input Resistance (Note 5) 8 5 kω AC Performance (Note ) Output Current Settling Time (Notes 6, 7) 0.5 µs Multiplying Feedthrough Error = ±0V, 0kHz Sinewave 0.8 mv P-P Digital-to-Analog Glitch Energy (Notes 6, 8) 0 nv-sec THD Total Harmonic Distortion (Note 9) 08 9 db Output Noise Voltage Density (Note 0) nv/ Hz Analog Outputs (Note ) C OT Output Capacitance DAC Register Loaded to All s C OT pf C OT 0 60 pf DAC Register Loaded to All 0s C OT 0 60 pf C OT pf Digital Inputs V IH Digital Input High Voltage.4 V V IL Digital Input Low Voltage 0.8 V I IN Digital Input Current V IN = 0V to V DD 0.00 ± µa C IN Digital Input Capacitance (Note ), V IN = 0V 8 pf Digital Outputs: SRO (LTC84 Only) V OH Digital Output High I OH = 00µA 4 V V OL Digital Output Low I OL =.6mA 0.4 V

4 ELECTRICAL CHARACTERISTICS V DD = 5V, = 0V, V OT = V OT = AGND = DGND = 0V, T A = T MIN to T MAX, unless otherwise specified. ALL GRADES SYMBOL PARAMETER CONDITIONS MIN TYP MAX NITS Timing Characteristics (Note ) t DS Serial Input to Strobe Setup Time STB sed as the Strobe 50 5 ns t DS (t STB = 80ns) STB sed as the Strobe 0 5 ns t DS STB sed as the Strobe 0 0 ns t DS4 STB4 sed as the Strobe 0 0 ns t DH Serial Input to Strobe Hold Time STB sed as the Strobe 0 0 ns t DH (t STB = 80ns) STB sed as the Strobe 50 5 ns t DH STB sed as the Strobe ns t DH4 STB4 sed as the Strobe ns t SRI Serial Input Data Pulse Width 80 ns t STB, t STB, Strobe Pulse Width (Note ) 80 ns t STB, t STB4 t STB, t STB, Strobe Pulse Width (Note ) 80 ns t STB, t STB4 t LD, t LD Load Pulse Width 40 ns t ASB LSB Strobed into Input Register 0 ns to Load DAC Register Time t CLR Clear Pulse Width 80 ns SRO Timing Characteristics (LTC84 Only) t PD STB, STB, STB4 Strobe to SRO C L = 50pF 0 0 ns Propagation Delay t PD STB to SRO Propagation Delay C L = 50pF ns Power Supply V DD Supply Voltage V I DD Supply Current Digital Inputs = 0V or V DD 0. ma Digital Inputs = V IH or V IL ma The denotes specifications which apply over the full operating temperature range. Note : ±0.5LSB = ±0.0% of full scale. Note : sing internal feedback resistor. Note : Guaranteed by design, not subject to test. Note 4: I OT with DAC register loaded with all 0s or I OT with DAC register loaded with all s. Note 5: Typical temperature coefficient is 00ppm/ C. Note 6: OT load = 00Ω in parallel with pf. Note 7: To 0.0% for a full-scale change, measured from falling edge of LD or LD. Note 8: = 0V. DAC register contents changed from all 0s to all s or from all s to all 0s. Note 9: = 6V RMS at khz. DAC register loaded with all s. Note 0: Calculation from e n = 4KTRB where: K = Boltzmann constant (J/K ); R = resistance (Ω); T = resistor temperature ( K); B = bandwidth (Hz). Note : Minimum high time for STB, STB, STB4. Minimum low time for STB. Note. Minimum low time for STB, STB, STB4. Minimum high time for STB. 4

5 BLOCK DIAGRAM W 5 0k 0k 0k 6 R FB 0k V DD 4 OT OT DECODER AGND CLR LD 5 LD 9 CLR LOAD BIT (MSB) BIT BIT BIT 4 BIT DAC REGISTER (LSB) STB 4 STB 8 STB 0 CLK OT INPT -BIT SHIFT REGISTER IN 7 SRI STB4 6 SRO 754/84 BD LTC84 ONLY DGND W W TI I G DIAGRA STROBE INPT STB, STB, STB4 (INVERT FOR STB) t DS t DS t DS t DS4 t DH t DH t DH t DH4 t STB t STB t STB t STB4 t STB t STB t STB t STB4 t SRI SRI PREVIOS WORD BIT MSB BIT BIT BIT LSB t ASB LD, LD t PD t PD t LD t LD SRO (LTC84 ONLY) BIT (MSB) PREVIOS WORD BIT BIT BIT LSB BIT (MSB) CRRENT WORD 754/84 TD0 5

6 TRTH TABLES Table. Input Register CONTROL INPTS Input Register Operation STB STB STB STB4 (LTC84: SRO Operation) 0 0 Serial Data Bit on SRI Loaded into Input 0 0 Register, MSB First (LTC84: Data Bit or SRI Appears on 0 0 SRO Pin After Clocked Bits) X X X No Input Register Operation X X X (LTC84: No SRO Operation) X X 0 X X X X Table. DAC Register CONTROL INPTS CLR LD LD DAC Register Operation 0 X X Reset DAC Register to All 0s (Asynchronous Operation; No Effect on Input Register) X No DAC Register Operation X 0 0 Load DAC Register with the Contents of Input Register TYPICAL APPLICATIONS nipolar Operation (-Quadrant Multiplication) 0V TO 0V 5V µp 0.µF TO NEXT DAC FOR DAISY-CHAINING (LTC84) STB CLR V DD STB SRI LD SRO (LTC84) LD STB STB4 DGND 5 6 LTC754 LTC84 R FB AGND OT OT pf + LT097 V OT 0V TO 754/84 TA0 nipolar Binary Code Table DIGITAL INPT BINARY NMBER IN ANALOG OTPT DAC REGISTER V OT MSB LSB (4095/4096) (048/4096) = / (/4096) V 6

7 TYPICAL APPLICATIONS Bipolar Operation (4-Quadrant Multiplication) 0V TO 0V 5V 0.µF 4 V DD 5 6 R FB pf R 0k R 0k (LOGIC INPTS OMITTED FOR CLARITY) LTC754 LTC84 OT OT + / LT R 0k + / LT V OT DGND AGND 754/84 TA04 Bipolar Offset Binary Code Table DIGITAL INPT BINARY NMBER IN ANALOG OTPT DAC REGISTER V OT MSB LSB (047/048) (/048) V 0 (/048) (048/048) = Information furnished by Linear Technology Corporation is believed to be accurate and reliable. However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection of its circuits as described herein will not infringe on existing patent rights. 7

8 PACKAGE DESCRIPTION Dimension in inches (millimeters) unless otherwise noted. N Package 6-Lead Plastic DIP ( ) 0.0 ± (.0 ± 0.7) (.4.65) * (9.558) MAX ( ) 0.05 (0.8) MIN 0.55 ± 0.05* (6.477 ± 0.8) (.65) TYP ( ) 0.5 (.75) MIN ± 0.05 (.4 ± 0.8) 0.00 ± 0.00 (.540 ± 0.54) *THESE DIMENSIONS DO NOT INCLDE MOLD FLASH OR PROTRSIONS. MOLD FLASH OR PROTRSIONS SHALL NOT EXCEED 0.00 INCH (0.54mm) ± 0.00 (0.457 ± 0.076) N S Package 6-Lead Plastic SOL (0.7) RAD MIN ( ) (NOTE ) ( ) (.6.64) ( ) ( ) (NOTE ) ( ) NOTE ( ) 0 8 TYP (.70) TYP ( ) TYP NOTE:. PIN IDENT, NOTCH ON TOP AND CAVITIES ON THE BOTTOM OF PACKAGES ARE THE MANFACTRING OPTIONS. THE PART MAY BE SPPLIED WITH OR WITHOT ANY OF THE OPTIONS.. THESE DIMENSIONS DO NOT INCLDE MOLD FLASH OR PROTRSIONS. MOLD FLASH OR PROTRSIONS SHALL NOT EXCEED INCH (0.5mm). NOTE ( ) ( ) SOL6 09 RELATED PARTS PART NMBER DESCRIPTION COMMENTS LTC57 Complete Serial I/O V OT -Bit DAC 5V to 5V Single Supply in 8-Pin SO and PDIP LTC45/LTC45/LTC45 Complete Serial I/O V OT -Bit DACs V/5V Single Supply in 8-Pin SO and PDIP LTC754A Parallel I/O Mulitplying -Bit DAC -Bit Wide Input LTC804 Serial Mulitplying -Bit DAC 8-Pin SO and PDIP 8 Linear Technology Corporation 60 McCarthy Blvd., Milpitas, CA (408) FAX: (408) TELEX: LT/GP K PRINTED IN SA LINEAR TECHNOLOGY CORPORATION 995

TYPICAL APPLICATION. LTC1595/LTC1596/LTC Serial 16-Bit Multiplying DACs DESCRIPTION FEATURES APPLICATIONS

TYPICAL APPLICATION. LTC1595/LTC1596/LTC Serial 16-Bit Multiplying DACs DESCRIPTION FEATURES APPLICATIONS LTC9/LTC9/LTC9- Serial -Bit Multiplying DACs FEATRES SO- Package (LTC9) DNL and INL: LSB Max Low Glitch Impulse: nv-s Typ Fast Settling to LSB: µs (with LT) Pin Compatible with Industry Standard -Bit DACs:

More information

12-Bit Serial Daisy-Chain CMOS D/A Converter DAC8143

12-Bit Serial Daisy-Chain CMOS D/A Converter DAC8143 a FEATURES Fast, Flexible, Microprocessor Interfacing in Serially Controlled Systems Buffered Digital Output Pin for Daisy-Chaining Multiple DACs Minimizes Address-Decoding in Multiple DAC Systems Three-Wire

More information

V6118 EM MICROELECTRONIC - MARIN SA. 2, 4 and 8 Mutiplex LCD Driver

V6118 EM MICROELECTRONIC - MARIN SA. 2, 4 and 8 Mutiplex LCD Driver EM MICROELECTRONIC - MARIN SA 2, 4 and 8 Mutiplex LCD Driver Description The is a universal low multiplex LCD driver. The version 2 drives two ways multiplex (two blackplanes) LCD, the version 4, four

More information

MT8814AP. ISO-CMOS 8 x 12 Analog Switch Array. Features. -40 to 85 C. Description. Applications

MT8814AP. ISO-CMOS 8 x 12 Analog Switch Array. Features. -40 to 85 C. Description. Applications MT884 8 x 2 Analog Switch Array Features Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5 to 3.2 2pp analog signal capability R ON 65Ω max. @ DD =2,

More information

CDK3402/CDK bit, 100/150MSPS, Triple Video DACs

CDK3402/CDK bit, 100/150MSPS, Triple Video DACs CDK3402/CDK3403 8-bit, 100/150MSPS, Triple Video DACs FEATURES n 8-bit resolution n 150 megapixels per second n ±0.2% linearity error n Sync and blank controls n 1.0V pp video into 37.5Ω or load n Internal

More information

MT8812 ISO-CMOS. 8 x 12 Analog Switch Array. Features. Description. Applications

MT8812 ISO-CMOS. 8 x 12 Analog Switch Array. Features. Description. Applications MT882 8 x 2 Analog Switch Array Features Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5V to 4.5V 4Vpp analog signal capability R ON 65 max. @ V DD

More information

Complete 12-Bit 40 MHz CCD Signal Processor AD9945

Complete 12-Bit 40 MHz CCD Signal Processor AD9945 Complete 12-Bit 40 MHz CCD Signal Processor AD9945 FEATURES 40 MSPS Correlated Double Sampler (CDS) 6 db to 40 db 10-Bit Variable Gain Amplifier (VGA) Low Noise Optical Black Clamp Circuit Preblanking

More information

Complete 10-Bit, 25 MHz CCD Signal Processor AD9943

Complete 10-Bit, 25 MHz CCD Signal Processor AD9943 a FEATURES 25 MSPS Correlated Double Sampler (CDS) 6 db to 40 db 10-Bit Variable Gain Amplifier (VGA) Low Noise Optical Black Clamp Circuit Preblanking Function 10-Bit, 25 MSPS A/D Converter No Missing

More information

Complete 10-Bit/12-Bit, 25 MHz CCD Signal Processor AD9943/AD9944

Complete 10-Bit/12-Bit, 25 MHz CCD Signal Processor AD9943/AD9944 a FEATURES 25 MSPS Correlated Double Sampler (CDS) 6 db to 40 db 10-Bit Variable Gain Amplifier (VGA) Low Noise Optical Black Clamp Circuit Preblanking Function 10-Bit (AD9943), 12-Bit (AD9944), 25 MSPS

More information

MT8806 ISO-CMOS 8x4AnalogSwitchArray

MT8806 ISO-CMOS 8x4AnalogSwitchArray MT886 ISO-CMOS 8x4AnalogSwitchArray Features Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5 V to 3.2 V 2Vpp analog signal capability R ON 65 max. @

More information

MT x 12 Analog Switch Array

MT x 12 Analog Switch Array MT885 8 x 2 Analog Switch Array Features Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5V to 3.2V 2Vpp analog signal capability R ON 65 max. @ V DD

More information

3-Channel 8-Bit D/A Converter

3-Channel 8-Bit D/A Converter FUJITSU SEMICONDUCTOR DATA SHEET DS04-2316-2E ASSP 3-Channel -Bit D/A Converter MB409 DESCRIPTION The MB409 is an -bit resolution ultra high-speed digital-to-analog converter, designed for video processing

More information

3 V/5 V, CMOS, 500 A Signal Conditioning ADC AD7714

3 V/5 V, CMOS, 500 A Signal Conditioning ADC AD7714 a FEATURES Charge Balancing ADC 24 Bits No Missing Codes 0.0015% Nonlinearity Five-Channel Programmable Gain Front End Gains from 1 to 128 Can Be Configured as Three Fully Differential Inputs or Five Pseudo-Differential

More information

SDA 3302 Family. GHz PLL with I 2 C Bus and Four Chip Addresses

SDA 3302 Family. GHz PLL with I 2 C Bus and Four Chip Addresses GHz PLL with I 2 C Bus and Four Chip Addresses Preliminary Data Features 1-chip system for MPU control (I 2 C bus) 4 programmable chip addresses Short pull-in time for quick channel switch-over and optimized

More information

DP8212 DP8212M 8-Bit Input Output Port

DP8212 DP8212M 8-Bit Input Output Port DP8212 DP8212M 8-Bit Input Output Port General Description The DP8212 DP8212M is an 8-bit input output port contained in a standard 24-pin dual-in-line package The device which is fabricated using Schottky

More information

3 V/5 V, CMOS, 500 A Signal Conditioning ADC AD7714

3 V/5 V, CMOS, 500 A Signal Conditioning ADC AD7714 a FEATURES Charge Balancing ADC 24 Bits No Missing Codes 0.0015% Nonlinearity Five-Channel Programmable Gain Front End Gains from 1 to 128 Can Be Configured as Three Fully Differential Inputs or Five Pseudo-Differential

More information

HCF4054B 4 SEGMENT LIQUID CRYSTAL DISPLAY DRIVER WITH STROBED LATCH FUNCTION

HCF4054B 4 SEGMENT LIQUID CRYSTAL DISPLAY DRIVER WITH STROBED LATCH FUNCTION 4 SEGMENT LIQUID CRYSTAL DISPLAY DRIVER WITH STROBED LATCH FUNCTION QUIESCENT CURRENT SPECIF. UP TO 20V OPERATION OF LIQUID CRYSTALS WITH CMOS CIRCUITS PROVIDES ULTRA LOW POWER DISPLAYS EQUIVALENT AC OUTPUT

More information

Complete 12-Bit 40 MHz CCD Signal Processor AD9945

Complete 12-Bit 40 MHz CCD Signal Processor AD9945 Complete 12-Bit 40 MHz CCD Signal Processor AD9945 FEATURES 40 MSPS Correlated Double Sampler (CDS) 6 db to 40 db 10-Bit Variable Gain Amplifier (VGA) Low Noise Optical Black Clamp Circuit Preblanking

More information

DATASHEET HA457. Features. Applications. Ordering Information. Pinouts. 95MHz, Low Power, AV = 2, 8 x 8 Video Crosspoint Switch

DATASHEET HA457. Features. Applications. Ordering Information. Pinouts. 95MHz, Low Power, AV = 2, 8 x 8 Video Crosspoint Switch DATASHEET HA457 95MHz, Low Power, AV = 2, 8 x 8 Video Crosspoint Switch FN4231 Rev 2. The HA457 is an 8 x 8 video crosspoint switch suitable for high performance video systems. Its high level of integration

More information

74F273 Octal D-Type Flip-Flop

74F273 Octal D-Type Flip-Flop Octal D-Type Flip-Flop General Description The 74F273 has eight edge-triggered D-type flip-flops with individual D inputs and Q outputs. The common buffered Clock (CP) and Master Reset (MR) inputs load

More information

RST RST WATCHDOG TIMER N.C.

RST RST WATCHDOG TIMER N.C. 19-3899; Rev 1; 11/05 Microprocessor Monitor General Description The microprocessor (µp) supervisory circuit provides µp housekeeping and power-supply supervision functions while consuming only 1/10th

More information

DM Segment Decoder/Driver/Latch with Constant Current Source Outputs

DM Segment Decoder/Driver/Latch with Constant Current Source Outputs DM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits

More information

DM Segment Decoder/Driver/Latch with Constant Current Source Outputs

DM Segment Decoder/Driver/Latch with Constant Current Source Outputs 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits to drive

More information

Features. PFD Output Voltage 2000 mv, Pk - Pk. PFD Gain Gain = Vpp / 2π Rad khz 100 MHz Square Wave Ref.

Features. PFD Output Voltage 2000 mv, Pk - Pk. PFD Gain Gain = Vpp / 2π Rad khz 100 MHz Square Wave Ref. HMC98LP5 / 98LP5E Typical Applications The HMC98LP5(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet Clock Generation Functional Diagram Features Ultra

More information

EL4583. Features. Sync Separator, 50% Slice, S-H, Filter, H OUT. Applications. Ordering Information. Pinout FN Data Sheet March 28, 2013

EL4583. Features. Sync Separator, 50% Slice, S-H, Filter, H OUT. Applications. Ordering Information. Pinout FN Data Sheet March 28, 2013 Data Sheet FN7173.4 Sync Separator, 50% Slice, S-H, Filter, H OUT The EL4583 extracts timing from video sync in NTSC, PAL, and SECAM systems, and non standard formats, or from computer graphics operating

More information

Maintenance/ Discontinued

Maintenance/ Discontinued A/D, D/C Converters for Image Signal Processing MN657011H Low Power 8-Bit, 3-Channel CMOS D/A Converter for Image Processing Overview The MN657011H is an 8-bit, 3-channel CMOS digitalto-analog converter

More information

MM5452/MM5453 Liquid Crystal Display Drivers

MM5452/MM5453 Liquid Crystal Display Drivers Liquid Crystal Display Drivers General Description The MM5452 is a monolithic integrated circuit utilizing CMOS metal gate, low threshold enhancement mode devices. It is available in a 40-pin molded package.

More information

Maintenance/ Discontinued

Maintenance/ Discontinued A/D, D/C Converters for Image Signal Processing MN6570F, MN6570TF, and MN6570EF Low Power 8-Bit, 3-Channel CMOS D/A Converters for Image Processing Overview The MN6570F, MN6570TF, and MN6570EF are highspeed

More information

FMS3810/3815 Triple Video D/A Converters 3 x 8 bit, 150 Ms/s

FMS3810/3815 Triple Video D/A Converters 3 x 8 bit, 150 Ms/s Triple Video D/A Converters 3 x 8 bit, 150 Ms/s Features 8-bit resolution 150 megapixels per second 0.2% linearity error Sync and blank controls 1.0V p-p video into 37.5Ω or 75Ω load Internal bandgap voltage

More information

HCF4027B DUAL J-K MASTER SLAVE FLIP-FLOP

HCF4027B DUAL J-K MASTER SLAVE FLIP-FLOP DUAL J-K MASTER SLAVE FLIP-FLOP SET RESET CAPABILITY STATIC FLIP-FLOP OPERATION - RETAINS STATE INDEFINETELY WITH CLOCK LEVEL EITHER HIGH OR LOW MEDIUM-SPEED OPERATION - 16MHz (Typ. clock toggle rate at

More information

Ultrasound Variable-Gain Amplifier MAX2035

Ultrasound Variable-Gain Amplifier MAX2035 19-63; Rev 1; 2/9 General Description The 8-channel variable-gain amplifier (VGA) is designed for high linearity, high dynamic range, and low-noise performance targeting ultrasound imaging and Doppler

More information

OBSOLETE. CMOS 80 MHz Monolithic (18) Color Palette RAM-DACs ADV478/ADV471

OBSOLETE. CMOS 80 MHz Monolithic (18) Color Palette RAM-DACs ADV478/ADV471 a FEATURES Personal System/2* Compatible 80 MHz Pipelined Operation Triple 8-Bit (6-Bit) D/A Converters 256 24(18) Color Palette RAM 15 24(18) Overlay Registers RS-343A/RS-170 Compatible Outputs Sync on

More information

Quadruple, 2:1, Mux Amplifiers for Standard-Definition and VGA Signals

Quadruple, 2:1, Mux Amplifiers for Standard-Definition and VGA Signals 9-4457; Rev ; 2/9 Quadruple, 2:, Mux Amplifiers for General Description The MAX954/MAX9542 are quadruple-channel, 2: video mux amplifiers with input sync tip clamps. These devices select between two video

More information

SMPTE-259M/DVB-ASI Scrambler/Controller

SMPTE-259M/DVB-ASI Scrambler/Controller SMPTE-259M/DVB-ASI Scrambler/Controller Features Fully compatible with SMPTE-259M Fully compatible with DVB-ASI Operates from a single +5V supply 44-pin PLCC package Encodes both 8- and 10-bit parallel

More information

1 Watt, MHz, SMT Tunable Band Pass Filter (MINI-ERF ) 1.75 x 2.40 x 0.387

1 Watt, MHz, SMT Tunable Band Pass Filter (MINI-ERF ) 1.75 x 2.40 x 0.387 MN-3-52-X-S4 1 Watt, 3 52 MHz, SMT Tunable Band Pass Filter (MINI-ERF ) 1.75 x 2.4 x.387 Typical Applications Military Radios Military Radar SATCOM Test and Measurement Equipment Industrial and Medical

More information

TDA2320 PREAMPLIFIER FOR INFRARED REMOTE CONTROL SYSTEMS

TDA2320 PREAMPLIFIER FOR INFRARED REMOTE CONTROL SYSTEMS WIDE SUPPLY VOLTAGE RAGE: 4 TO 20V SIGLE OR SPLIT SUPPLY OPERATIO VERY LOW CURRET COSUMPTIO: 0.8mA VERY LOW DISTORTIO: 0.03% TYPICA DESCRIPTIO The TDA2320 is a monolithic integrated circuit in Dip package

More information

HCF40193B PRESETTABLE UP/DOWN COUNTERS (DUAL CLOCK WITH RESET) BINARY TYPE

HCF40193B PRESETTABLE UP/DOWN COUNTERS (DUAL CLOCK WITH RESET) BINARY TYPE PRESETTABLE UP/DOWN COUNTERS (DUAL CLOCK WITH RESET) BINARY TYPE INDIVIDUAL CLOCK LINES FOR COUNTING UP OR COUNTING DOWN SYNCHRONOUS HIGH-SPEED CARRY AND BORROW PROPAGATION DELAYS FOR CASCADING ASYNCHRONOUS

More information

EL1881. Features. Sync Separator, Low Power. Applications. Pinout. Demo Board. Data Sheet September 15, 2011 FN7018.2

EL1881. Features. Sync Separator, Low Power. Applications. Pinout. Demo Board. Data Sheet September 15, 2011 FN7018.2 EL1881 Data Sheet FN7018.2 Sync Separator, Low Power The EL1881 video sync separator is manufactured using Elantec s high performance analog CMOS process. This device extracts sync timing information from

More information

DM74LS377 Octal D-Type Flip-Flop with Common Enable and Clock

DM74LS377 Octal D-Type Flip-Flop with Common Enable and Clock October 1988 Revised March 2000 DM74LS377 Octal D-Type Flip-Flop with Common Enable and Clock General Description The DM74LS377 is an 8-bit register built using advanced low power Schottky technology.

More information

Maintenance/ Discontinued

Maintenance/ Discontinued A/D, D/C Converters for Image Signal Processing MN65531AS Low Power 6-Bit CMOS A/D Converter for Image Processing Overview The MN65531AS is a totally parallel 6-bit CMOS analog-to-digital converter with

More information

TMC3503 Triple Video D/A Converter 8 bit, 80 Msps, 5V

TMC3503 Triple Video D/A Converter 8 bit, 80 Msps, 5V Triple Video D/A Converter 8 bit, 80 Msps, 5V Features 8-bit resolution 80, 50, and 30 megapixels per second ±0.5 LSB linearity error Sync, blank, and white controls Independent sync current output 1.0V

More information

Complete 14-Bit 30 MSPS CCD Signal Processor AD9824

Complete 14-Bit 30 MSPS CCD Signal Processor AD9824 a FEATURES 14-Bit 30 MSPS A/D Converter 30 MSPS Correlated Double Sampler (CDS) 4 db 6 db 6-Bit Pixel Gain Amplifier (PxGA ) 2 db to 36 db 10-Bit Variable Gain Amplifier (VGA) Low Noise Clamp Circuits

More information

DATASHEET EL4583. Features. Applications. Ordering Information. Pinout. Sync Separator, 50% Slice, S-H, Filter, HOUT. FN7173 Rev 4.

DATASHEET EL4583. Features. Applications. Ordering Information. Pinout. Sync Separator, 50% Slice, S-H, Filter, HOUT. FN7173 Rev 4. DATASHEET EL4583 Sync Separator, 50% Slice, S-H, Filter, HOUT The EL4583 extracts timing from video sync in NTSC, PAL, and SECAM systems, and non standard formats, or from computer graphics operating at

More information

Graphics Video Sync Adder/Extractor

Graphics Video Sync Adder/Extractor 19-0602; Rev 2; 1/07 EVALUATION KIT AVAILABLE Graphics Video Sync Adder/Extractor General Description The chipset provides a 3-wire (RGB) interface for 5-wire (RGBHV) video by adding and extracting the

More information

MAX11503 BUFFER. Σ +6dB BUFFER GND *REMOVE AND SHORT FOR DC-COUPLED OPERATION

MAX11503 BUFFER. Σ +6dB BUFFER GND *REMOVE AND SHORT FOR DC-COUPLED OPERATION 19-4031; Rev 0; 2/08 General Description The is a low-power video amplifier with a Y/C summer and chroma mute. The device accepts an S-video or Y/C input and sums the luma (Y) and chroma (C) signals into

More information

Tutorial on Technical and Performance Benefits of AD719x Family

Tutorial on Technical and Performance Benefits of AD719x Family The World Leader in High Performance Signal Processing Solutions Tutorial on Technical and Performance Benefits of AD719x Family AD7190, AD7191, AD7192, AD7193, AD7194, AD7195 This slide set focuses on

More information

TEA6425 VIDEO CELLULAR MATRIX

TEA6425 VIDEO CELLULAR MATRIX IDEO CELLULAR MATRIX 6 ideo Inputs - 8 ideo Outputs Internal Selectable YC Adders MHz Bandwidth @ -db Selectable 0./6.dB Gain FOR EACH Output High Impedance Switch for each Output (- state operation) Programmable

More information

ML6428. S-Video Filter and 75Ω Line Drivers with Summed Composite Output. Features. General Description. Block Diagram Σ BUFFER.

ML6428. S-Video Filter and 75Ω Line Drivers with Summed Composite Output. Features. General Description. Block Diagram Σ BUFFER. www.fairchildsemi.com ML S-Video Filter and Line Drivers with Summed Composite Output Features.MHz Y and C filters, with CV out for NTSC or PAL cable line driver for Y, C, CV, and TV modulator db stopband

More information

3 V/5 V, 450 μa 16-Bit, Sigma-Delta ADC AD7715

3 V/5 V, 450 μa 16-Bit, Sigma-Delta ADC AD7715 3 V/5 V, 450 μa 16-Bit, Sigma-Delta ADC AD7715 FEATURES Charge-balancing ADC 16-bits no missing codes 0.0015% nonlinearity Programmable gain front end Gains of 1, 2, 32 and 128 Differential input capability

More information

LMH0344 3Gbps HD/SD SDI Adaptive Cable Equalizer

LMH0344 3Gbps HD/SD SDI Adaptive Cable Equalizer 3Gbps HD/SD SDI Adaptive Cable Equalizer General Description The 3Gbps HD/SD SDI Adaptive Cable Equalizer is designed to equalize data transmitted over cable (or any media with similar dispersive loss

More information

ADC0804C, ADC BIT ANALOG-TO-DIGITAL CONVERTERS WITH DIFFERENTIAL INPUTS

ADC0804C, ADC BIT ANALOG-TO-DIGITAL CONVERTERS WITH DIFFERENTIAL INPUTS 8-Bit esolution atiometric Conversion 100-µs Conversion Time 135-ns Access Time No Zero Adjust equirement On-Chip Clock Generator Single 5-V Power Supply Operates With Microprocessor or as Stand-Alone

More information

74F574 Octal D-Type Flip-Flop with 3-STATE Outputs

74F574 Octal D-Type Flip-Flop with 3-STATE Outputs 74F574 Octal D-Type Flip-Flop with 3-STATE Outputs General Description The F574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The

More information

4-Channel Video Reconstruction Filter

4-Channel Video Reconstruction Filter 19-2948; Rev 1; 1/5 EVALUATION KIT AVAILABLE 4-Channel Video Reconstruction Filter General Description The 4-channel, buffered video reconstruction filter is ideal for anti-aliasing and DAC-smoothing video

More information

300MHz Single Supply Video Amplifier with Low In/Out Rail -IN -IN +IN +IN -VCC. Part Number Temperature Range Package Packaging Marking TSH341ILT

300MHz Single Supply Video Amplifier with Low In/Out Rail -IN -IN +IN +IN -VCC. Part Number Temperature Range Package Packaging Marking TSH341ILT 3MHz Single Supply Video Amplifier with Low In/Out Rail Bandwidth: 3MHz Single supply operation down to 3V Low input & output rail Very low harmonic distortion Slew rate: 4V/µs Voltage Input noise: 7nV/

More information

Datasheet SHF A

Datasheet SHF A SHF Communication Technologies AG Wilhelm-von-Siemens-Str. 23D 12277 Berlin Germany Phone +49 30 772051-0 Fax ++49 30 7531078 E-Mail: sales@shf.de Web: http://www.shf.de Datasheet SHF 19120 A 2.85 GSa/s

More information

LMH0002 SMPTE 292M / 259M Serial Digital Cable Driver

LMH0002 SMPTE 292M / 259M Serial Digital Cable Driver SMPTE 292M / 259M Serial Digital Cable Driver General Description The SMPTE 292M / 259M serial digital cable driver is a monolithic, high-speed cable driver designed for use in SMPTE 292M / 259M serial

More information

Video Filter Amplifier with SmartSleep and Y/C Mixer Circuit

Video Filter Amplifier with SmartSleep and Y/C Mixer Circuit 19-535; Rev 2; 2/9 Video Filter Amplifier with SmartSleep General Description The video filter amplifier with SmartSleep and Y/C mixer is ideal for portable media players (PMPs), portable DVD players,

More information

2 MHz Lock-In Amplifier

2 MHz Lock-In Amplifier 2 MHz Lock-In Amplifier SR865 2 MHz dual phase lock-in amplifier SR865 2 MHz Lock-In Amplifier 1 mhz to 2 MHz frequency range Dual reference mode Low-noise current and voltage inputs Touchscreen data display

More information

Features TEMP. RANGE ( C) ICM7245AIM44Z ICM7245 AIM44Z -25 C to +85 C 44 Ld MQFP Q44.10x10

Features TEMP. RANGE ( C) ICM7245AIM44Z ICM7245 AIM44Z -25 C to +85 C 44 Ld MQFP Q44.10x10 DATASHEET 8-Character, 16-Segment, Microprocessor Compatible, LED Display Decoder Driver FN8587 Rev 0.00 The is an 8-character, alphanumeric display driver and controller which provides all the circuitry

More information

Power Supply and Watchdog Timer Monitoring Circuit ADM9690

Power Supply and Watchdog Timer Monitoring Circuit ADM9690 a FEATURES Precision Voltage Monitor (4.31 V) Watchdog Timeout Monitor Selectable Watchdog Timeout 0.75 ms, 1.5 ms, 12.5 ms, 25 ms Two RESET Outputs APPLICATIONS Microprocessor Systems Computers Printers

More information

LM MHz RGB Video Amplifier System with OSD

LM MHz RGB Video Amplifier System with OSD LM1279 110 MHz RGB Video Amplifier System with OSD General Description The LM1279 is a full featured and low cost video amplifier with OSD (On Screen Display). 8V operation for low power and increased

More information

Description. ICM7231BFIJL -25 to Ld CERDIP 8 Digit Parallel F40.6. ICM7231BFIPL -25 to Ld PDIP 8 Digit Parallel E40.6

Description. ICM7231BFIJL -25 to Ld CERDIP 8 Digit Parallel F40.6. ICM7231BFIPL -25 to Ld PDIP 8 Digit Parallel E40.6 August 17 Numeric/Alphanumeric Triplexed LCD Display Drivers Features ICM7231 Drives 8 Digits of 7 Segments with Two Independent Annunciators Per Digit Address and Data Input in Parallel Format ICM7232

More information

DATASHEET EL4583A. Features. Applications. Pinout. Ordering Information. Sync Separator, 50% Slice, S-H, Filter, HOUT. FN7503 Rev 2.

DATASHEET EL4583A. Features. Applications. Pinout. Ordering Information. Sync Separator, 50% Slice, S-H, Filter, HOUT. FN7503 Rev 2. DATASHEET Sync Separator, 50% Slice, S-H, Filter, HOUT FN7503 Rev 2.00 The extracts timing from video sync in NTSC, PAL, and SECAM systems, and non-standard formats, or from computer graphics operating

More information

Complete 10-Bit and 12-Bit, 25 MHz CCD Signal Processors AD9943/AD9944

Complete 10-Bit and 12-Bit, 25 MHz CCD Signal Processors AD9943/AD9944 Complete 10-Bit and 12-Bit, 25 MHz CCD Signal Processors AD9943/AD9944 FEATURES 25 MSPS correlated double sampler (CDS) 6 db to 40 db 10-bit variable gain amplifier (VGA) Low noise optical black clamp

More information

DATASHEET EL1883. Features. Applications. Ordering Information. Demo Board. Pinout. Sync Separator with Horizontal Output. FN7010 Rev 2.

DATASHEET EL1883. Features. Applications. Ordering Information. Demo Board. Pinout. Sync Separator with Horizontal Output. FN7010 Rev 2. DATASHEET EL883 Sync Separator with Horizontal Output FN7 Rev 2. The EL883 video sync separator is manufactured using Elantec s high performance analog CMOS process. This device extracts sync timing information

More information

74F377 Octal D-Type Flip-Flop with Clock Enable

74F377 Octal D-Type Flip-Flop with Clock Enable 74F377 Octal D-Type Flip-Flop with Clock Enable General Description The 74F377 has eight edge-triggered, D-type flip-flops with individual D inputs and Q outputs. The common buffered Clock (CP) input loads

More information

PART TEMP RANGE PIN-PACKAGE

PART TEMP RANGE PIN-PACKAGE General Description The MAX6701 microprocessor (µp) supervisory circuits reduce the complexity and components required to monitor power-supply functions in µp systems. These devices significantly improve

More information

3 V/5 V, ±10 V Input Range, 1 mw 3-Channel 16-Bit, Sigma-Delta ADC AD7707

3 V/5 V, ±10 V Input Range, 1 mw 3-Channel 16-Bit, Sigma-Delta ADC AD7707 3 V/5 V, ±10 V Input Range, 1 mw 3-Channel 16-Bit, Sigma-Delta ADC AD7707 FEATURES Charge balancing ADC 16 bits, no missing codes ±0.003% nonlinearity High level (±10 V) and low level (±10 mv) input channels

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) OCTAL BUS TRANSCEIVER/REGISTER WITH 3 STATE OUTPUTS HIGH SPEED: f MAX = 60 MHz (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.)

More information

DM Segment Decoder Driver Latch with Constant Current Source Outputs

DM Segment Decoder Driver Latch with Constant Current Source Outputs DM9368 7-Segment Decoder Driver Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits

More information

PCI-DAS6034, PCI-DAS6035, and PCI-DAS6036

PCI-DAS6034, PCI-DAS6035, and PCI-DAS6036 PCI-DAS6034, PCI-DAS6035, and PCI-DAS6036 Specifications Document Revision 1.2, February, 2010 Copyright 2010, Measurement Computing Corporation Typical for 25 C unless otherwise specified. Specifications

More information

L9822E OCTAL SERIAL SOLENOID DRIVER

L9822E OCTAL SERIAL SOLENOID DRIVER L9822E OCTAL SERIAL SOLENOID DRIVER EIGHT LOW RDSon DMOS OUTPUTS (0.5Ω AT IO = 1A @ 25 C VCC = 5V± 5%) 8 BIT SERIAL INPUT DATA (SPI) 8 BIT SERIAL DIAGNOSTIC OUTPUT FOR OVERLOAD AND OPEN CIRCUIT CONDITIONS

More information

Complete 14-Bit, 56 MSPS Imaging Signal Processor AD9941

Complete 14-Bit, 56 MSPS Imaging Signal Processor AD9941 Complete 14-Bit, 56 MSPS Imaging Signal Processor AD9941 FEATURES Differential sensor input with 1 V p-p input range 0 db/6 db variable gain amplifier (VGA) Low noise optical black clamp circuit 14-bit,

More information

FMS3818 Triple Video D/A Converters 3 x 8 bit, 180 Ms/s

FMS3818 Triple Video D/A Converters 3 x 8 bit, 180 Ms/s Triple Video D/A Converters 3 x 8 bit, 180 Ms/s www.fairchildsemi.com Features ±2.5% gain matching ±0.5 LSB linearity error Internal bandgap voltage reference Low glitch energy Single 3.3 Volt power supply

More information

VFD Driver/Controller IC

VFD Driver/Controller IC DESCRIPTION is a Vacuum Fluorescent Display (VFD) Controller driven on a 1/4 to 1/11 duty factor. Eleven segment output lines, 6 grid output lines, 5 segment/grid output drive lines, one display memory,

More information

Component Analog TV Sync Separator

Component Analog TV Sync Separator 19-4103; Rev 1; 12/08 EVALUATION KIT AVAILABLE Component Analog TV Sync Separator General Description The video sync separator extracts sync timing information from standard-definition (SDTV), extendeddefinition

More information

Maxim Integrated Products 1

Maxim Integrated Products 1 9-6; Rev ; /8 Ω PART TEMP RANGE PIN-PACKAGE EAE+ -4 C to +85 C 6 SSOP (5.mm x 6.mm) PKG COE A6+ +5V +5V.μF.μF CAMERA UNSHIELE TWISTE PAIR ( TO m).μf INP CLAMP AAPTIVE EQUALIZER OUT AC INN.μF FEQ FEQ AGC

More information

Low Power, 16-Bit Buffered Sigma-Delta ADC AD7790

Low Power, 16-Bit Buffered Sigma-Delta ADC AD7790 Low Power, 16-Bit Buffered Sigma-Delta ADC AD7790 FEATURES Power Supply: 2.5 V to 5.25 V operation Normal: 75 µa maximum Power-down: 1 µa maximum RMS noise: 1.1 µv at 9.5 Hz update rate 16-bit p-p resolution

More information

Specifications for Thermopilearrays HTPA8x8, HTPA16x16 and HTPA32x31 Rev.6: Fg

Specifications for Thermopilearrays HTPA8x8, HTPA16x16 and HTPA32x31 Rev.6: Fg Principal Schematic for HTPA16x16: - 1 - Pin Assignment in TO8 for 8x8: Connect all reference voltages via 100 nf capacitors to VSS. Pin Assignment 8x8 Pin Name Description Type 1 VSS Negative power supply

More information

Photodiode Detector with Signal Amplification

Photodiode Detector with Signal Amplification 107 Bonaventura Dr., San Jose, CA 95134 Tel: +1 408 432 9888 Fax: +1 408 432 9889 www.x-scanimaging.com Linear X-Ray Photodiode Detector Array with Signal Amplification XB8801R Series An X-Scan Imaging

More information

HCC4054B/55B/56B HCF4054B/55B/56B

HCC4054B/55B/56B HCF4054B/55B/56B HCC454B/55B/56B HCF454B/55B/56B LIQUID-CRYSTAL DISPLAY DRIERS 454B 4-SEGMENT DISPLAY DRIER - STROBED LATCH FUNCTION 455B BCD TO 7-SEGMENT DECODER/DRIER, WITH DIS- PLAY-FREQUENCY OUTPUT 456B BCD TO 7-SEGMENT

More information

PROGRAMMABLE DC SOURCE VIEW RECORDERS Programmable DC Source FEATURES

PROGRAMMABLE DC SOURCE VIEW RECORDERS Programmable DC Source FEATURES Programmable DC Source Sink and Source Capability Conventional DC sources usually have the function of power supply (source) only without power absorption (sink) function. In addition to the source function,

More information

WINTER 15 EXAMINATION Model Answer

WINTER 15 EXAMINATION Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The model answer and the answer written by candidate

More information

Maintenance/ Discontinued

Maintenance/ Discontinued CCD Delay Line Series MNS NTSC-Compatible CCD Video Signal Delay Element Overview The MNS is a CCD signal delay element for video signal processing applications. It contains such components as a shift

More information

EVALUATION KIT AVAILABLE +3.0V to +5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector V CC FILTER.

EVALUATION KIT AVAILABLE +3.0V to +5.5V, 125Mbps to 266Mbps Limiting Amplifiers with Loss-of-Signal Detector V CC FILTER. 19-1314; Rev 5; 8/06 EVALUATION KIT AVAILABLE +3.0V to +5.5V, 125Mbps to 266Mbps General Description The MAX3969 is a recommended upgrade for the MAX3964 and MAX3968. The limiting amplifier, with 2mVP-P

More information

Data Sheet March Features. ICM7218AIJI -40 to Ld CERDIP F28.6 Common Anode. ICM7218BIJI -40 to Ld CERDIP F28.

Data Sheet March Features. ICM7218AIJI -40 to Ld CERDIP F28.6 Common Anode. ICM7218BIJI -40 to Ld CERDIP F28. TM ICM2 Data Sheet March 200 File Number 359. -Digit LED Microprocessor-Compatible Multiplexed Display Decoder Driver The ICM2 series of universal LED driver systems provide, in a single package, all the

More information

TIL311 HEXADECIMAL DISPLAY WITH LOGIC

TIL311 HEXADECIMAL DISPLAY WITH LOGIC TIL311 Internal TTL MSI IC with Latch, Decoder, and Driver 0.300-Inch (7,62-mm) Character Height Wide Viewing Angle High Brightness Left-and-Right-Hand Decimals Constant-Current Drive for Hexadecimal Characters

More information

LadyBug Technologies, LLC LB5908A True-RMS Power Sensor

LadyBug Technologies, LLC LB5908A True-RMS Power Sensor LadyBug Technologies, LLC LB5908A True-RMS Power Sensor LB5908ARev8 LadyBug Technologies www.ladybug-tech.com Telephone: 707-546-1050 Page 1 LB5908A Data Sheet Key PowerSensor+ TM Specifications Frequency

More information

TSH MHz Single Supply Video Buffer with Low In/Out Rail. Pin Connections (top view) Description. Applications. Order Codes

TSH MHz Single Supply Video Buffer with Low In/Out Rail. Pin Connections (top view) Description. Applications. Order Codes TSH34 3MHz Single Supply Video Buffer with Low In/Out Rail Bandwidth: 3MHz Single supply operation down to 3V Low input & output rail Very low harmonic distortion Slew rate: 78V/µs Voltage input noise:

More information

ICM Digit LED Microprocessor-Compatible Multiplexed Display Decoder Driver. Features. Related Literature FN Data Sheet February 15, 2007

ICM Digit LED Microprocessor-Compatible Multiplexed Display Decoder Driver. Features. Related Literature FN Data Sheet February 15, 2007 ICM2 Data Sheet February 5, 200 FN359.2 -Digit LED Microprocessor-Compatible Multiplexed Display Decoder Driver The ICM2 series of universal LED driver systems provide, in a single package, all the circuitry

More information

EVALUATION KIT AVAILABLE Multirate SMPTE SD/HD Cable Driver with Selectable Slew Rate TOP VIEW +3.3V. 10nF IN+ IN- MAX3812 SD/HD GND RSET +3.

EVALUATION KIT AVAILABLE Multirate SMPTE SD/HD Cable Driver with Selectable Slew Rate TOP VIEW +3.3V. 10nF IN+ IN- MAX3812 SD/HD GND RSET +3. 19-3571; Rev ; 2/5 EVALUATION KIT AVAILABLE Multirate SMPTE SD/HD Cable Driver General Description The is a multirate SMPTE cable driver designed to operate at data rates up to 1.485Gbps, driving one or

More information

74LVQ374 Low Voltage Octal D-Type Flip-Flop with 3-STATE Outputs

74LVQ374 Low Voltage Octal D-Type Flip-Flop with 3-STATE Outputs 74LVQ374 Low Voltage Octal D-Type Flip-Flop with 3-STATE Outputs General Description The LVQ374 is a high-speed, low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and

More information

4-Channel Video Filter for RGB and CVBS Video

4-Channel Video Filter for RGB and CVBS Video 19-2951; Rev 2; 2/7 4-Channel Video Filter for RGB and CVBS Video General Description The 4-channel, buffered video reconstruction filter is ideal for anti-aliasing and DAC-smoothing video applications

More information

DS2176 T1 Receive Buffer

DS2176 T1 Receive Buffer T1 Receive Buffer www.dalsemi.com FEATURES Synchronizes loop timed and system timed T1 data streams Two frame buffer depth; slips occur on frame boundaries Output indicates when slip occurs Buffer may

More information

RGB Encoder For the availability of this product, please contact the sales office. VIDEO OUT Y/C MIX DELAY CLAMP

RGB Encoder For the availability of this product, please contact the sales office. VIDEO OUT Y/C MIX DELAY CLAMP MATRIX Description The CXA1645P/M is an encoder IC that converts analog RGB signals to a composite video signal. This IC has various pulse generators necessary for encoding. Composite video outputs and

More information

32 Channel CPCI Board User Manual

32 Channel CPCI Board User Manual 0 Sections Page 1.0 Introduction 1 2.0 Unpacking and Inspection 1 3.0 Hardware Configuration 1 4.0 Board Installation 5 5.0 I/O Connections and the Front Panel 5 5.1 Front Panel Layout 5 5.2 Input and

More information

192-Bit, 360 MHz True-Color Video DAC with Onboard PLL ADV7129

192-Bit, 360 MHz True-Color Video DAC with Onboard PLL ADV7129 a FEATURES 192-Bit Pixel Port Allows 2048 2048 24 Screen Resolution 360 MHz, 24-Bit True-Color Operation Triple 8-Bit D/A Converters 8:1 Multiplexing Onboard PLL RS-343A/RS-170 Compatible Analog Outputs

More information

HMC613LC4B POWER DETECTORS - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz

HMC613LC4B POWER DETECTORS - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz v.54 HMC6LC4B AMPLIFIER (SDLVA),. - GHz Typical Applications The HMC6LC4B is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control Circuits

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD PROGRAMMABLE PRECISION REFERENCE. DESCRIPTION The UTC TL431 is a three-terminal adjustable regulator with a guaranteed thermal stability over applicable temperature ranges.

More information

HD Features. CMOS Manchester Encoder-Decoder. Pinout. Ordering Information. Data Sheet October 15, 2008

HD Features. CMOS Manchester Encoder-Decoder. Pinout. Ordering Information. Data Sheet October 15, 2008 HD-6409 Data Sheet FN2951.3 CMOS Manchester Encoder-Decoder The HD-6409 Manchester Encoder-Decoder (MED) is a high speed, low power device manufactured using self-aligned silicon gate technology. The device

More information