fco, MHz Nom. * Not for use with DC voltage at input and output ports 3dB 1dB F co F 20 F R E QUE NC Y F R 20dB Frequency (MHz)
|
|
- Millicent Wilson
- 5 years ago
- Views:
Transcription
1 Coaxial Low Pass Filter Ω *DC to 27 MHz Maximum Ratings Operating Temperature - C to C Storage Temperature - C to C RF Power Input* W max. at 2 C DC Current Input to Output.A max. at 2 C * Passband rating, derate linearly to 3.W at C ambient. Permanent damage may occur if any of these limits are exceeded. Outline Drawing Features rugged unibody construction, small size 7 sections excellent power handling, W temperature stable low cost protected by U.S. Patent 6,943,646 Applications harmonic rejection transmitters/receivers lab use PASSBAND fco, MHz Nom. STOP BAND (loss, db) (:1) (loss < 1 db) (loss 3 db) F Fr Stopband Passband Max. Typ. Min. Typ. Typ. Typ. Typ. NO. OF SECTIONS *DC * Not for use with DC voltage at input and output ports Electrical Specifications at 2 C CASE STYLE: FF74 Connectors SMA Model +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications.312 Across Flats in some models inch Outline Dimensions ( mm ) typical frequency response AT T E NUAT ION db db 3dB 1dB F co F F R E QUE NC Y F R db R F IN electrical schematic R F OUT B D E wt grams Frequency Typical Performance Data at 2 C Insertion Loss (:1) INSERTION LOSS VLF-27 INSERTION LOSS FREQUENCY Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. REV. E C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled M11777 to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at Mini-Circuits EDR-6783/4 AD/TD/CP/AM P.O. Box 3166, Brooklyn, NY (718) 934- sales@minicircuits.com Page 1 of 1 VLF FREQUENCY
2 Coaxial Low Pass Filter Typical Performance Data FREQ. INSERTION C INPUT RETURN LOSS OUTPUT C REV. X1 87 Page 1 of 1
3 Coaxial Low Pass Filter Typical Performance Curves INSERTION LOSS vs. TEMPERATURE - Input Power = dbm +2 Input Power = dbm + Input Power = dbm Frequency INPUT RETURN LOSS vs. TEMPERATURE - Input Power = dbm +2 Input Power = dbm + Input Power = dbm Frequency OUTPUT RETURN LOSS vs. TEMPERATURE - Input Power = dbm +2 Input Power = dbm + Input Power = dbm Frequency REV. X1 87 Page 1 of 1
4 Case Style Outline Dimensions FF FF74 FF886 FF887 FF888 FF969 FF1118 FF114 CASE #. A B C D E WT GRAMS FF74 FF886 FF887 FF888 FF969 FF1118 FF114.4 (.41).62 (1.7).62 (1.7).4 (.41). (14.).4 (.41).4 (.41) Dimensions are in inches (mm). Tolerances: 2Pl. ±.3; 3Pl. ±.1 Notes: 1. Case material: Stainless steel. 2. Case finish: Passivation for FF888, gold plate on all remaining case style. 3. Round Flange may have.312 Across Flats in some models (36.32) 1.9 (48.26) 2.24 (6.9) 1.18 (29.97) 1.7 (44.4) 2.67 (67.82) 1.91 (48.1).312 (7.92) FF Rev.: AP (1/9/18) M1684 File: 98-FF.docx Sheet 7 of This document and its contents are the property of Mini-Circuits.
5 Mini-Circuits Environmental Specifications ENV28 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature - to C Ambient Environment Individual Model Data Sheet Storage Temperature - to C Ambient Environment Individual Model Data Sheet Barometric Pressure, Feet MIL-STD-2, Method, Condition D Humidity 9% RH, 6 C Units may require bake-out after humidity to restore full performance. MIL-STD-2, Method 3 Thermal Shock -6 to 12 C, cycles MIL-STD-2, Method 7, Condition B Vibration (High Frequency) g peak, - Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-2, Method 4, Condition D Mechanical Shock g, 6ms sawtooth, 3 shocks each direction 3 axes (total 18) MIL-STD-2, Method 213, Condition I ENV28 Rev: B 9/26/13 M File: ENV28.pdf This document and its contents are the property of Mini-Circuits. Page: 1
Features wideband, 10 to 500 MHz. Applications military, hi-rel applications stabilizing generator outputs reducing amplitude variations
+ to +20dBm Limiter 50Ω Broadband to 500 MHz Maximum Ratings Operating Temperature -55 C to 0 C Storage Temperature -55 C to 0 C RF Power 0mW Permanent damage may occur if any of these limits are exceeded.
More informationApplications protects low noise amplifiers and other devices from ESD or input power damage military, hi-rel applications
+12 to +3dBm Limiter 5Ω Broadband 3 to 3 MHz Maximum Ratings Operating Temperature -55 C to 1 C Storage Temperature -55 C to 1 C RF Power 2W Permanent damage may occur if any of these limits are exceeded.
More informationFeatures low conversion loss, 6.05 db typ. good L-R isolation, 35 db typ, L-I, 30 db typ. wideband, 10 to 2000 MHz rugged shielded case
Coaxial Level 10 ( Power +10 dbm) 10 to 2000 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Power 50mW IF Current ma Permanent damage may occur if any of
More informationFeatures excellent conversion loss, 6.0 db typ. high L-R isolation, 40 db typ. L-I isolation, 55 db typ. rugged welded construction
Plug-In NON-CATAG Level 10 ( Power +10 dbm) 10 to 1000 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Power Pin Connections 8 RF 3,4^ IF 1 GROUND 2,5,6,7
More informationLAVI-U252VH+ Performance Charts. LO=+18dBm LO=+21dBm LO=+24dBm. LO=+18dBm LO=+21dBm LO=+24dBm. LO=+18dBm LO=+21dBm LO=+24dBm
Up Converter Frequency Mixer Level 21 ( Power +21 dbm) 10 to 2500 MHz Maximum Ratings Operating Temperature -45 C to 85 C Storage Temperature -55 C to 100 C Power Pin Connections +24 dbm IF Power +21 dbm
More informationFeatures low conversion loss, 6.79 db typ. wideband, 1 to 1000 MHz. Applications HF/VHF/UHF cellular federal & defense communications
Surface Mount Frequency Mixer Level 7 ( Power +7 dbm) 1 to 1000 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power IF Current Pin Connections 1 RF 4 IF
More informationFeatures low conversion loss, 6.11 db typ. excellent L-R isolation, 44 db typ. CONVERSION LOSS (db) Mid-Band m. Range f L. Conversion Loss (db)
Surface Mount Level 13 ( Power +13dBm) 2 to 500 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power Pin Connections 1 RF 4 IF 5 GROUND 2,3,6 Outline Drawing
More informationADE-R3GLH+ CONVERSION LOSS 50. ISOLATION (db) 10 LO= +7 dbm LO= +10 dbm LO=+13 dbm FREQUENCY (MHz) RF VSWR
Surface Mount High Reliability Mixer Level 10 ( Power +10 dbm) 2000 to 2700 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power 50mW IF Current 40mA Permanent
More informationFeatures low conversion loss, 5.94 db typ. aqueous washable J-leads for strain relief. CONVERSION LOSS (db) Mid-Band m. Range f L.
Surface Mount Frequency Mixer Level 7 ( Power +7dBm) 0.5 to 500 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power Pin Connections 1 RF 4 IF 5 GROUND 2,3,6
More informationFrequency Mixer wide band
High IP3 Frequency Mixer wide band Level 13 ( Power+13 dbm) 500 to 3500 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Power IF Current Pin Connections 200
More informationLimiter RLM Ω Broadband 950 to 2050 MHz. The Big Deal
+5 to +30 dbm Limiter 50Ω Broadband 950 to 2050 MHz The Big Deal High CW input power, 1 W Very low limiting output power, 0 dbm typ. Very fast response time, 2 nsec CASE STYLE: CK1246-1 Product Overview
More informationUSB Smart Power Sensor
50Ω -30 dbm to +20 dbm, 1 MHz to 8000 MHz The Big Deal Fast measurement speed, 10 msec USB HID device compatible with 32/64 Bit operating systems Includes Measurement Application GUI (Graphical User Interface)
More informationNo need for external driver, saving PCB space and cost.
50Ω 5 to 2700 MHz High Power 3W The Big Deal High Port count in super small size Single Positive Supply Voltage, 2.5 4.8V High Power P0.1dB, 3W typ. Low Insertion Loss, 0.6 db at 1 GHz CASE STYLE: MT1817
More informationSP6T RF Switch JSW6-23DR Ω High Power 3W 5 to 2000 MHz. The Big Deal
75Ω High Power 3W 5 to 2000 MHz The Big Deal High Port count in super small size High Power P0.1dB, 3W Low Insertion Loss, 0.7 db at 1 GHz CASE STYLE: MT1817 Product Overview is a high power reflective
More informationUSB Smart Power Sensor
USB Smart Power Sensor 50Ω -30 dbm to +20 dbm, 1MHz to 6000 MHz The Big Deal Low cost USB HID device compatible with 32 Bit operating system Includes Measurement Application GUI (Graphical User Interface)
More informationFCPM-6000RC. Mini-Circuits P.O. Box , Brooklyn, NY (718)
USB / Ethernet Integrated Frequency Counter & Power Meter 50Ω -30 dbm to +20 dbm, 1 MHz to 6000 MHz The Big Deal Automatically synchronized power & frequency measurements USB and Ethernet control Includes
More informationMonolithic Amplifier GVA-60+ Flat Gain, High IP to 5 GHz. The Big Deal
Flat Gain, High IP3 Monolithic Amplifier 50Ω 0.01 to 5 GHz The Big Deal Excellent Gain Flatness and Return Loss over 50-1000 MHz High IP3 vs. DC Power consumption Broadband High Dynamic Range without external
More informationUSB Smart Power Sensor
75Ω -30 dbm to +20 dbm, 100 khz to 2500 MHz The Big Deal 75Ω Impedance Low cost USB HID device compatible with 32/64 Bit operating systems Includes Measurement Application GUI (Graphical User Interface)
More informationOrbital 694XA Series. Ka BAND EXTERNAL REFERENCE LNB with rear anchor posts. Wide range of Frequencies and Bandwidths LNB 1855R 1000 XA-WN60
Orbital 694XA Series Ka BAND EXTERNAL REFERENCE LNB with rear anchor posts Wide range of Frequencies and Bandwidths How to order an Orbital 694XA Series Ka Ext Ref LNB Frequencies (GHz): LO Input Output
More information4400X Series. Orbital. X-Band Ext Ref LNB. MIL Spec MIL-STD A, 45 db internal filter LNB630S-500X-WN60-G12. Orbital Features: Orbital Specs:
Orbital 4400X Series X-Band Ext Ref LNB 4400X Series, X-Band Ext Ref LNB with Universal 12-hole gasket input isolator. MIL Spec MIL-STD-188-164A, 45 db internal filter How to order an Orbital 4400X Series
More informationFeatures. = +25 C, IF= 100 MHz, LO= +13 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units
Features Passive Double Balanced Topology High LO/RF Isolation: 48 db Low Conversion Loss: 7 db Wide IF Bandwidth: DC - GHz Robust 1,000V esd, Class 1C Typical Applications The is ideal for: Point-to-Point
More informationOrbital 4400X & 4400XI Series X-Band Ext Ref LNB
Orbital 4400X & 4400XI Series X-Band Ext Ref LNB 4400XI Series, X-Band Ext Ref LNB with Universal 12-hole gasket input isolator MIL Spec MIL-STD-188-164A, 45 db internal filter How to order an Orbital
More informationFeatures. = +25 C, IF = 0.5 GHz, LO = +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units
v1.514 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Features Passive: No DC Bias Required
More informationTGL2209 SM 8 12 GHz 50 Watt VPIN Limiter
Product Overview The Qorvo is a high power, X-band GaAs VPIN limiter capable of protecting sensitive receive channel components against high power incident signals. The does not require DC bias, and achieves
More informationTGL2210-SM_EVB GHz 100 Watt VPIN Limiter. Product Overview. Key Features. Applications. Functional Block Diagram. Ordering Information
.5 6 GHz Watt VPIN Limiter Product Overview The Qorvo is a high-power receive protection circuit (limiter) operating from.5-6ghz. Capable of withstanding up to W incident power levels, the allows < dbm
More information= +25 C, IF= 100 MHz, LO = +15 dbm*
v4.514 HMC62LC4 Typical Applications The HMC62LC4 is ideal for: Point-to-Point Point-to-Multi-Point Radio WiMAX & Fixed Wireless VSAT Functional Diagram Features General Description Electrical Specifications,
More information1.5 GHz to 4.5 GHz, GaAs, MMIC, Double Balanced Mixer HMC213BMS8E
FEATURES Passive: no dc bias required Conversion loss: 1 db typical Input IP3: 21 dbm typical RoHS compliant, ultraminiature package: 8-lead MSOP APPLICATIONS Base stations Personal Computer Memory Card
More information6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A
FEATURES Conversion loss: 9 db typical Local oscillator (LO) to radio frequency (RF) isolation: 37 db typical LO to intermediate frequency (IF) isolation: 37 db typical RF to IF isolation: db typical Input
More information= +25 C, IF= 100 MHz, LO = +17 dbm*
v3.514 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Wide IF Bandwidth: DC - 3.5
More informationFeatures. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units
v3.514 MIXER, 5.5-14. GHz Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Functional Diagram Features Passive Double Balanced
More informationMICROLITHIC DOUBLE-BALANCED MIXER
ML1-936 The ML1-936 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
More informationMICROLITHIC DOUBLE-BALANCED I/Q MIXER
MLIQ18 The MLIQ18 is a miniaturized, multi-octave 2-18 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either up
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com HMC148* Product Page Quick Links Last Content Update: 11/1/216 Comparable
More informationMICROLITHIC DOUBLE-BALANCED MIXER
ML1-15 The ML1-15 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
More informationMICROLITHIC DOUBLE-BALANCED MIXER
ML15 The ML15 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
More information10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B
Data Sheet FEATURES Passive; no dc bias required Conversion loss 8 db typical for 1 GHz to 18 GHz 9 db typical for 18 GHz to 26 GHz LO to RF isolation: 4 db Input IP3: 19 dbm typical for 18 GHz to 26 GHz
More informationMICROLITHIC DOUBLE-BALANCED MIXER
Page 1 The is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
More informationMICROLITHIC DOUBLE-BALANCED I/Q MIXER
MLIQ-416 The MLIQ-416 is a miniaturized, multi-octave 4-16 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either
More informationGaAs MMIC Double Balanced Mixer
Page 1 The is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation and spurious
More informationR&S ZVA-Zxx Millimeter-Wave Converters Specifications
ZVA-Zxx_dat-sw_en_5214.2033.22_umschlag.indd 1 Data Sheet 13.00 Test & Measurement R&S ZVA-Zxx Millimeter-Wave Converters Specifications 28.01.2013 15:08:06 CONTENTS General information... 3 Definitions...
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Ultra Low Noise Amplifier ~ RLNAMG Electrical Specifications, TA = +⁰C, Vcc = +V Features Gain: db Typical Noise Figure:.dB Typical PdB Output Power: +dbm Typical Supply Voltage: +V /ma Ohm Matched Typical
More informationGaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A
FEATURES Conversion loss: db LO to RF isolation: db LO to IF isolation: 3 db Input third-order intercept (IP3): 1 dbm Input second-order intercept (IP2): dbm LO port return loss: dbm RF port return loss:
More informationMICROLITHIC DOUBLE-BALANCED MIXER
ML1-185 The ML1-185 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.514 MIXER, 5.5-14. GHz Typical
More informationNot recommended for new designs
Device Features NF = 0.7 db @ 900MHz at RF connectors of Demo board Gain = 19.0 db @ 900 MHz OIP3 = 36.0 dbm @ 1900MHz, 2450MHz Output P1 db = 21.0 dbm @ 900MHz, 22.0 dbm @2450MHz 5V/48mA, MTTF > 100 Years,
More informationSTEVAL-TDR007V1. 3 stage RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E. Features. Description
3 stage RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E Features N-channel enhancement-mode lateral MOSFETs Excellent thermal stability Frequency: 1030 MHz Supply voltage:
More informationMICROLITHIC DOUBLE-BALANCED I/Q MIXER
The is a miniaturized, multi-octave 185 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either up or downconversion.
More informationMICROLITHIC DOUBLE-BALANCED MIXER
M1-638 The M1-638 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
More informationTGA2218-SM GHz 12 W GaN Power Amplifier
Applications Satellite Communications Data Link Radar Product Features Functional Block Diagram Frequency Range: 13.4 16.5 GHz PSAT: > 41 dbm (PIN = 18 dbm) PAE: > 29% (PIN = 18 dbm) Large Signal Gain:
More informationKeysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters. Technical Overview
Keysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters Technical Overview Introduction Broad frequency range up to 50 GHz maximizes the operating range of your instrument
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.514 MIXER, 2.5-7. GHz Typical
More informationParameter Min. Typ. Max. Units. Frequency Range 5 20 GHz. Minimum Insertion Loss db. Dynamic 5 GHz 23 db
5-2 GHz GaAs MMIC EWA21ZZ September 29 Rev 3 Features Broadband Performance: 5 to 2 GHz Dynamic Range: 23 db, typical Input IP3: + 21 dbm, typical (any attenuation) Dual Voltage Control: -1.5 to V ESD
More informationR&S ZVA-Zxx Millimeter-Wave Converters Specifications
R&S ZVA-Zxx Millimeter-Wave Converters Specifications Data Sheet Version 19.00 CONTENTS Definitions... 3 General information... 4 Specifications... 5 Test port... 5 Source input (RF IN)... 5 Local oscillator
More informationMICROLITHIC DOUBLE-BALANCED MIXER
M1 The M1 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth and
More informationParameter Input Output Min Typ Max Diode Option (GHz) (GHz) Input drive level (dbm)
MMD3HSM The MMD3HSM is a passive double balanced MMIC doubler covering to 3 GHz on the output. It features excellent conversion loss, superior isolations and harmonic suppressions across a broad bandwidth,
More informationAgilent N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz
Agilent N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz Technical Overview High Performance Power Limiters Broad frequency range up to 50 GHz maximizes the operating range of your instrument High power
More informationOrbital Ka-ISO. Ext Ref Ka LNB with integrated isolator. Orbital Research Ltd Marine Drive, White Rock, BC. Canada V4B 1A9
Orbital Ka-ISO Ext Ref Ka LNB with integrated isolator Orbital Research Ltd 14239 Marine Drive, White Rock, BC. Canada V4B 1A9 Part number generator Frequencies (GHz): LO Input Output Bandwidth 18.40F
More informationGaAs MMIC Double Balanced Mixer
Page 1 The is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation
More informationPower Amplifier 0.5 W 2.4 GHz AM TR Features. Functional Schematic. Description. Pin Configuration 1. Ordering Information
Features Ideal for 802.11b ISM Applications Single Positive Supply Output Power 27.5 dbm 57% Typical Power Added Efficiency Downset MSOP-8 Package Description M/A-COM s is a 0.5 W, GaAs MMIC, power amplifier
More informationHMC613LC4B POWER DETECTORS - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz
v.54 HMC6LC4B AMPLIFIER (SDLVA),. - GHz Typical Applications The HMC6LC4B is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control Circuits
More informationR&S ZN-Z103 Calibration Unit Specifications. Data Sheet V02.01
R&S ZN-Z103 Calibration Unit Specifications Data Sheet V02.01 CONTENTS Definitions... 3 Measurement range... 5 Effective system data... 5 General data... 6 Ordering information... 7 2 Rohde & Schwarz R&S
More informationThe Hmc869LC5 is ideal for: Point-to-Point and Point-to-Multi-Point Radio. Parameter Min. Typ. Max. Units
Typical Applications The Hmc86LC is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features Electrical Specifications, T
More informationTypical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.
Device Features NF = 0.91 db @ 900MHz at RF connectors of Demo board Gain = 22.0 db @ 900 MHz OIP3 = 36.0 dbm @ 1900MHz, 38.0 dbm @ 2450MHz Output P1 db = 20.5 dbm @ 900/1900/2140 MHz 5V/75mA, MTTF > 100
More informationParameter Input Output Min Typ Max Diode Option (GHz) (GHz) Input drive level (dbm)
MMD3H The MMD3H is a passive double balanced MMIC doubler covering 1 to 3 GHz on the output. It features excellent conversion loss, superior isolations and harmonic suppressions across a broad bandwidth,
More information= +25 C, IF= 100 MHz, LO = +15 dbm*
v3.514 Typical Applications Features The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Digital Radio VSAT Functional Diagram Wide IF Bandwidth: DC - 3.5 GHz Image Rejection: 35 db LO to RF
More informationHMC814LC3B FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications
Typical Applications The is ideal for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Sensors Functional Diagram Features High
More informationFeatures. = +25 C, As a Function of LO Drive & Vdd. IF = 1 GHz LO = -4 dbm & Vdd = +4V
v4.414 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Integrated LO Amplifier: -4
More information= +25 C, IF= 100 MHz, LO = +15 dbm*
v3.514 HMC52LC4 6-1 GHz Typical Applications Features The HMC52LC4 is ideal for: Point-to-Point and Point-to-Multi-Point Radio Digital Radio VSAT Functional Diagram Wide IF Bandwidth: DC - 3.5 GHz Image
More informationGaAs MMIC Double Balanced Mixer
Page 1 The is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor. Accurate,
More informationFeatures. = +25 C, IF = 1 GHz, LO = +13 dbm*
v.5 HMC56LM3 SMT MIXER, 24-4 GHz Typical Applications Features The HMC56LM3 is ideal for: Test Equipment & Sensors Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Functional Diagram
More informationKeysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters. Technical Overview
Keysight N9355/6 Power Limiters 0.01 to 18, 26.5 and 50 GHz High Performance Power Limiters Technical Overview Introduction Broad frequency range up to 50 GHz maximizes the operating range of your instrument
More informationHMC412BMS8GE MIXER - SINGLE & DOUBLE BALANCED - SMT. Typical Applications. Features. Functional Diagram. General Description
HMCBMSGE v1.1 Typical Applications The HMCBMSGE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Functional Diagram Features Conversion Loss: db Noise Figure: db LO to RF Isolation: db LO to
More informationFeatures. Parameter Min. Typ. Max. Min. Typ. Max. Units
v. DOWNCONVERTER, - GHz Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Maritime & Mobile Radios Features Conversion
More informationParameter Min. Typ. Max. Min. Typ. Max. Units
v1.214 HMC163LP3E Typical Applications The HMC163LP3E is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Sensors Functional Diagram Features
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
LEADER OF RF BROADBAND SOLTIONS Clarke & Severn Electronics Ph + Email sales@clarke.com.au www.clarke.com.au RFSPTA000GSB Absorptive Coaxial SPT Switch 0. - 0GHz Electrical Specifications, TA = + C, SB
More informationGaAs MMIC Double Balanced Mixer
Page 1 The is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor. Low
More informationCMD257C GHz High IP3 I/Q Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High IP3 Image rejection: 3 db Wide IF bandwidth Pb-free RoHs compliant 4x4 mm SMT package Description The is a high IP3 I/Q mixer in a leadless surface
More informationFeatures OBSOLETE. = +25 C, IF = 1.45 GHz, LO = +13 dbm [1]
v2.614 Typical Applications The HMC412AMS8G / HMC412AMS8GE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Functional Diagram Features General Description Parameter Min. Typ. Max. Units Frequency
More informationOBSOLETE HMC908LC5 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT. GaAs MMIC I/Q DOWNCONVERTER 9-12 GHz. Typical Applications. Functional Diagram
v3.1 HMC98LC Typical Applications The HMC98LC is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Maritime & Mobile Radio Functional Diagram
More informationCMD176P GHz 4-Bit Digital Phase Shifter. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low phase error Low insertion loss 36 phase shift, LSB = 22.5 Single bit positive logic Pb-free RoHs compliant 4x4 QFN package Description The CMD176P4 is a GaAs MMIC
More informationR&S ZN-Z85 Switch Matrix Specifications
R&S ZN-Z85 Switch Matrix Specifications Data Sheet Version 01.02 CONTENTS Definitions... 3 Block diagrams... 4 Specifications... 5 General features... 5 Performance data... 5 Remote control... 5 Switching
More informationCMD179C GHz Fundamental Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description The CMD179C3 is a general purpose
More informationSURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES SGRF300 SGRF300D SGRF300DD SGRF303 SGRF303D SGRF303DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil
More informationCMD180C GHz Fundamental Mixer. Features. Functional Block Diagram. Description
CMD18C3 2-32 GHz Fundamental Mixer Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description
More informationGaAs DOUBLE-BALANCED MIXER
MM1-3H The MM1-3H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
More informationHigh Power ARNS/IFF Limiter Module: Ultra Low Flat Leakage & Fast Recovery Time
RELEASED RFLM-961122MC-299 High Power ARNS/IFF Limiter Module: Ultra Low Flat Leakage & Fast Recovery Time Features: SMT Limiter Module: 8mm x 5mm x 2.5mm Frequency Range: 960 MHz to 1,215 MHz High Average
More informationInstruction Manual Model BlockUpconverter
Instruction Manual Model 2115-55 BlockUpconverter June 2009 - Rev. 0 MODEL 2115 UPCONVERTER CROSS TECHNOLOGIES INC. EXT 10MHZ ALARM POWER Data, drawings, and other material contained herein are proprietary
More informationFMMX9004 DATA SHEET. Field Replaceable SMA IQ Mixer From 15 GHz to 23 GHz With an IF Range From DC to 3.5 GHz And LO Power of +17 dbm.
FMMX94 Field Replaceable SMA IQ Mixer From 15 GHz to 23 GHz With an IF Range From DC to 3.5 GHz And LO Power of +17 dbm FMMX94 is an I/Q double balanced millimeter-wave mixer module that operates across
More informationFeatures. = +25 C, IF = 100 MHz, LO = 0 dbm, Vcc1, 2, 3, = +5V, G_Bias = +3.5V*
v3.1 LO AMPLIFIER, 7 - MHz Typical Applications The HMC684LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +32
More informationFMMX9002 DATA SHEET. Field Replaceable SMA IQ Mixer From 8.5 GHz to 13.5 GHz With an IF Range From DC to 2 GHz And LO Power of +19 dbm.
FMMX92 Field Replaceable SMA IQ Mixer From 8.5 GHz to 13.5 GHz With an IF Range From DC to 2 GHz And LO Power of +19 dbm FMMX92 is an I/Q double balanced millimeter-wave mixer module that operates across
More informationFeatures. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *
Typical Applications The is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +38 dbm 8 db Conversion Loss @ 0 dbm LO Optimized
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v4.414 Typical Applications Features
More informationGaAs DOUBLE-BALANCED MIXER
MM1-185H The MM1-185H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form
More informationTypical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.
Device Features OIP3 = 39.0 dbm @ 70 MHz Gain = 24 db @ 70 MHz Output P1 db = 20.5 dbm @ 70 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product Description
More informationOBSOLETE HMC215LP4 / 215LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
v1.111 LO AMPLIFIER, 1.7-4. GHz Typical Applications The HMC215LP4 / HMC215LP4E is ideal for Wireless Infrastructure Applications: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM &
More informationHMC485MS8G / 485MS8GE. Features OBSOLETE. = +25 C, LO = 0 dbm, IF = 200 MHz*, Vdd= 5V
Typical Applications High Dynamic Range Infrastructure: GSM, GPRS & EDGE CDMA & W-CDMA Cable Modem Termination Systems Functional Diagram Features +34 dbm Input IP3 Conversion Loss: db Low LO Drive: -2
More informationTypical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.
Device Features OIP3 = 44.0 dbm @ 70 MHz Gain = 20.3 db @ 70 MHz Output P1 db = 23.5 dbm @ 70 MHz 50 Ω Cascadable Patented over voltage protection Lead-free/RoHS-compliant SOT-89 SMT package Product Description
More informationFeatures OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 70 MHz
Typical Applications Functional Diagram The HMC28AMS8 / HMC28AMS8E is ideal for: Base Stations PCMCIA Transceivers Cable Modems Portable Wireless Features Ultra Small Package: MSOP8 Conversion Loss: db
More informationFeatures. = +25 C, IF= 100 MHz, LO = +17 dbm*
v2.31 HMC-C44 1-23 GHz Typical Applications The HMC-C44 is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Features Wide
More informationCMD255C GHz High IP3 Fundamental Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High IP3 High isolation Wide IF bandwidth Pb-free RoHs compliant 3x3 mm SMT package Description The CMD255C3 is a general purpose double balanced mixer
More information