NICHARGE UNIFIX 20. Le support universel (sol, mur, mât, ) 16/04/2018 CO00117

Transcription

1 NICHARGE UNIFIX 20 FR ES Le support universel (sol, mur, mât, ) 16/04/2018 CO00117

2 UNIFIX 20 Dear customer, we thank you for purchasing one of our Uniteck products. Please read carefully all instructions before using your product. Unifix brackets have been specially designed to fix your Unisun photovoltaic panels or equivalent (see part compatible panels): Unifix 20 for your Unisun panels 10.12M / 20.12M / M UNIFIX 20 Simple to install, they attach either: on a rigid horizontal or vertical surface (eg wall, concrete floor, wood frame). on round mast with a diameter of 40 to 60 mm (supplied flange) on signaling posts using flanges with M8 screws With our galvanized steel structure and corrosion-resistant stainless-steel screws, they are perfectly suited for outdoor use. Equipped with the multi-position tilt system, Unifix supports allow you to optimize your performance according to the chosen orientation. 0 Adjustable By Electrical performance depending on tilt and panel orientation East 93% 90% 78% 55% South east 93% 96% 88% 66% South 93% 100% 91% 68% South west 93% 96% 88% 66% West 93% 90% 78% 55% To make the panel / regulator / battery connection, we recommend that you use the Uniconnect ready-touse kits that optimize your electrical performance and simplify installation: Uniconnect 1.6 = connection 1 panel Uniconnect 2.6 = connection 2 panels Uniconnect 3.6 = connection 3 panels 11/28

3 UNIFIX 20 PANEL COMPATABILITY With the design based on the use of Oblong drilling, Unifix allows the fixing of different panels of the market. Unifix accepts 1 panels, with the spacings and dimensions of panels indicated below. L (p) L (e) H (e) H (p) Oblong fastening system Centre distance and panel dimensions Dim Support Number of panels Spacers for fastening of each panel (in mm) Panel Dimension Max L H x 2 x 3 L (e) H (e) L (p)hh H (p) Unifix > > 300 No max Total weight Of panels (In Kg) SAFETY INSTRUCTIONS Take appropriate measures to prevent accidents during assembly work. If the bracket and mounting hardware are exposed to direct sunlight for a long time, there is a risk of burns. Protect yourself. At the end of the work, check that your supports and panels are securely fastened. 12/28

4 UNIFIX 20 RECOMMDATIONS Mount Unifix brackets only on surfaces with sufficient lift. Consider the additional load with panel: Support Panel Unifix 20 = 1,4 kg Unisun 10.12M / 20.12M / 20.24M =1.8kg / 2.6kg / 2.6kg Fastening: to prevent large quantities of snow from accumulating behind the sensor, install appropriate shut-off gates upstream. The arrangement of the solar panel influences your electrical performance. Choose the most optimal inclination and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow (eg tree) Before attaching and connecting, please observe: the maximum distances shown below between each element. connection order Unifix + wiring with Uniconnect connection kit Panel 3 Panel 2 panel 1 Cable- Regulator Batteries 1 m max (1) 1 m max (1) 8 m max 2 m max 1 4 m max (2) 2 (1) Possibility of extending the distance between the panels by one additional meter, by adding a Unicable 612B and 612 R (cables not supplied with the Uniconnect kits). (2) Unicable 612B and 612 R (cables not supplied with the Uniconnect kits). Ordre de connexion 1 connection regulator batterie connecting solar panel régulateur connecting regulator electrical usage For disconnection please proceed in reverse order. For more information, refer to the operating manual of your photovoltaic charge regulator 13/28

5 UNIFIX 20 -LIST OF PRODUCT LIST OF PIECES M800 M80 x6 M56 D8 x8 D5 M8 x8 M5 N 1 N 2 N 3 N 4 N 13 Recommended tightening torque Vis Couple M5 5,10 Nm M 6 8,80 Nm M 8 21,50 Nm M 10 44,00 Nm Nb. Average friction coefficient μ = 0.20 / Tightening at 50% of the elastic limit 14/28

6 UNIFIX 20 MOUNTING Attach the 2 pieces 3 to the frame of your Unisun solar panel. Pre-tighten the nuts. The final tightening will be carried out at the end of the assembly. M80 D8 M8 N 3 Attach the 2 pieces 3 to the frame of your Unisun solar panel. Pre-tighten the nuts. The final tightening will be carried out at the end of the assembly.. M80 D8 M8 N 1 N 2 N /28

7 UNIFIX 20 - WALL FIXATION / GROUND FIXATION / ROOF FIXATION Fix your support with 8 screws adapted to your surface (screws and dowels not supplied). 470 mm Unifix has a multi-position tilt system. (10 positions) Set the desired tilt to the desired orientation. 0 Electrical performance depending on tilt and panel orientation Adjustable By East 93% 90% 78% 55% South-East 93% 96% 88% 66% South 93% 100% 91% 68% South-west 93% 96% 88% 66% West 93% 90% 78% 55% 16/28

8 UNIFIX 20 WALL FIXATION / GROUND FIXATION / ROOF FIXATION Attach your panel to the tilt system M56 D5 M5 Now tighten the 6 nuts that were previously pre-screwed 17/28

9 UNIFIX 20 - FIXING ON ROUND MAST (DIAM 40 TO 60MM) Secure the bracket to the mast with its flange and screws M800 D8 M8 N 13 Unifix has a multi-position tilt system. (10 positions). Set the desired tilt to the desired orientation. 0 Performance électrique en fonction de l'inclinaison et de l'orientation panneau Adjustable by Est 93% 90% 78% 55% Sud-Est 93% 96% 88% 66% Sud 93% 100% 91% 68% Sud Ouest 93% 96% 88% 66% Ouest 93% 90% 78% 55% Fasten your panel according to the chosen inclination. M56 D5 M5 18/28

10 UNIFIX 20 - FIXING ON ROUND MAST (DIAM 40 TO 60MM) Now tighten the 6 nuts that were previously pre-screwed. 19/28