Features excellent conversion loss, 6.0 db typ. high L-R isolation, 40 db typ. L-I isolation, 55 db typ. rugged welded construction
|
|
|
- Diane Parrish
- 5 years ago
- Views:
Transcription
1 Plug-In NON-CATAG Level 10 ( Power +10 dbm) 10 to 1000 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Power Pin Connections 8 RF 3,4^ IF 1 GROUND 2,5,6,7 CASE GROUND 2,5,6,7 ^ pins must be connected together externally Outline Drawing 50mW IF Current 40mA Permanent damage may occur if any of these limits are exceeded. Features excellent conversion loss, 6.0 db typ. high L-R isolation, 40 db typ. L-I isolation, 55 db typ. rugged welded construction Applications VHF/UHF defense & federal communications FREQUENCY 1 db COMP.: +5 dbm typ. CONVERSION SS Electrical Specifications -RF ISOLATION CASE STYLE: A06 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications -IF ISOLATION /RF IF Mid-Band m Total L M U L M U f L -f U X σ Max. Range Max. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min L = low range [f L to 10 f L ] M = mid range [10 f L to f U /2] U = upper range [f U /2 to f U ] m= mid band [2f L to f U /2] Typical Performance Data Frequency Conversion Loss Isolation L-R Isolation L-I VSWR RF Port (:1) VSWR Port (:1) RF +10dBm +10dBm +10dBm +10dBm +10dBm inch Outline Dimensions ( mm ) A B C D E F G H J K wt grams Electrical Schematic Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at REV. C Mini-Circuits M DJ/TD/CP/AM P.O. Box , Brooklyn, NY (718) sales@minicircuits.com Page 1 of 2
2 Performance Charts NON-CATAG CONVERSION SS at IF Freq of 30 MHz CONVERSION SS =+7 dbm =+10 dbm =+13 dbm FREQUENCY ISOLATION L-R ISOLATION =+7 dbm =+10 dbm =+13 dbm FREQUENCY ISOLATION L-I ISOLATION =+7 dbm =+10 dbm =+13 dbm FREQUENCY VSWR RF VSWR =+7 dbm =+10 dbm =+13 dbm FREQUENCY VSWR VSWR =+7 dbm =+10 dbm =+13 dbm FREQUENCY VSWR IF VSWR =+7 dbm =+10 dbm =+13 dbm FREQUENCY Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at Mini-Circuits P.O. Box , Brooklyn, NY (718) sales@minicircuits.com Page 2 of 2
3 Typical Performance Data RF (IN) CONVERSION SS (dbm) RF (IN) IP3 INPUT (dbm) RF (IN) (dbm) Page 1 of 5
4 Typical Performance Data IF (OUT) CONVERSION SS VS. (dbm) IF (OUT) CONVERSION SS VS. (dbm) IF (OUT) CONVERSION SS VS. (dbm) Page 2 of 5
5 Typical Performance Data -RF (dbm) -IF (dbm) RF (IN) RF-IF (dbm) Page 3 of 5
6 Typical Performance Data RF (IN) RF VSWR (dbm) VSWR (dbm) IF (OUT) IF (dbm) Page 4 of 5
7 Harmonics Tables RF HARMONICS ORDER (-dbm) (-dbc) > > > > > > > > >100 >93 93 >93 89 >93 >93 >93 > RF CAL Test conditions: RF IN: MHz; 0.00 dbm. IN: MHz; dbm IF OUT: MHz; dbm HARMONICS ORDER RF HARMONICS ORDER (-dbm) (-dbc) > > >100 >83 > > >100 >83 >83 >83 77 >83 80 >83 76 >83 >83 >83 6 >100 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 7 >100 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 8 >100 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 9 >100 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 10 >100 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 RF CAL Test conditions: RF IN: MHz; dbm. IN: MHz; dbm IF OUT: MHz; dbm HARMONICS ORDER Notes: 1. All Harmonics are in (dbc) relative to IF OUTPUT entry denotes harmonics are in (dbc) above IF OUTPUT. 3. RF Cal represent the Harmonics level of the RF input signal to the mixer. Page 5 of 5
8 Typical Performance Curves Conversion Loss = +7dBm Conversion IF=30MHz = +10dBm = +13dBm RF Frequency Conversion Loss Conversion Loss vs. RF=500.1MHz = +10dBm IF Frequency Conversion Loss vs. RF=10.1MHz Conversion Loss vs. RF=1000.1MHz Conversion Loss = +10dBm IF Frequency Conversion Loss = +10dBm IF Frequency IP3 Input RF IN=+5dBm 50 IP3 Input (dbm) = +7dBm = +10dBm = +13dBm Compression = +7dBm = +10dBm = +13dBm 5 0 RF Frequency RF Frequency Page 1 of 3
9 Typical Performance Curves -IF Isolation RF VSWR RF Isolation IF Isolation = +7dBm = +10dBm = +13dBm Frequency RF VSWR -RF Isolation 0 = +7dBm = +10dBm = +13dBm 0.0 RF Frequency IF VSWR Frequency RF-IF Isolation IF VSWR = +7dBm = +10dBm = +13dBm VSWR RF-IF Isolation IF Frequency = +7dBm = +10dBm = +13dBm = +7dBm = +10dBm = +13dBm RF Frequency VSWR = +7dBm = +10dBm = +13dBm Frequency Page 2 of 3
10 Harmonics Tables RF HARMONICS ORDER (-dbm) (-dbc) > > > > > > > > >100 >93 93 >93 89 >93 >93 >93 > RF CAL Test conditions: RF IN: MHz; 0.00 dbm. IN: MHz; dbm IF OUT: MHz; dbm HARMONICS ORDER RF HARMONICS ORDER (-dbm) (-dbc) > > >100 >83 > > >100 >83 >83 >83 77 >83 80 >83 76 >83 >83 >83 6 >100 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 7 >100 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 8 >100 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 9 >100 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 10 >100 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 >83 RF CAL Test conditions: RF IN: MHz; dbm. IN: MHz; dbm IF OUT: MHz; dbm HARMONICS ORDER Notes: 1. All Harmonics are in (dbc) relative to IF OUTPUT entry denotes harmonics are in (dbc) above IF OUTPUT. 3. RF Cal represent the Harmonics level of the RF input signal to the mixer. Page 3 of 3
11 Case Style Outline Dimensions A A01 A04 A05 A06 CASE# A B C D E F G H J K A (9.78) (10.16) A (5.08) (5.33) A05 (19.56) (20.32) (9.40) (10.16) (5.08) (6.10) (6.35) A (7.24) (7.87) Dimensions are in inches (mm). Tolerances: 2 Pl. +.03; 3 Pl (5.08).14 (3.56).031 (.79) WT, GRAM Notes: 1. Header material: C.R.S. Pin material: #52 alloy. Cover material: Cupro-Nickel. 2. Pin finish: Electro Tin-Silver. 3. Insulated spacer available. Request P/N B Tolerance on pin diameter +/-.005 inch. 5. Glass meniscus inch max. 6. Blue bead indicates Pin 1. Pin numbers do not appear on unit, for reference only. 98-A Rev.: B (03/15/12) M File: 98-A.doc Sheet 1 of 2 This document and its contents are the property of Mini-Circuits
12 Mini-Circuits Environmental Specifications ENV30 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -55 to 100 C Ambient Environment Individual Model Data Sheet Storage Temperature -55 to 100 C Ambient Environment Individual Model Data Sheet Thermal Shock -55 to 100 C, 100 cycles MIL-STD-202, Method 107, Condition A-3, except +100 C Vibration (High Frequency) 20g peak, Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-202, Method 204, Condition D Mechanical Shock 50g, 11 ms, 1/2-sine, 18 shocks: 3 each direction, each of 3 axes MIL-STD-202, Method 213, Condition A Moisture Resistance 10 cycles, 24 hours per cycle MIL-STD-202, Method 106, Condition A, except 50 C and end point electrical test done within 12 hours Solderability 10X Magnification J-STD-002, 95% Coverage Resistance to Solder Heat 260 C for 10 seconds MIL-STD-202, Method 210, Condition B Marking Resistance to Solvents Isopropyl alcohol + mineral spirits at 25 C; terpene defluxer at 25 C; distilled water + proylene glycol monomethyl ether + monoethanolamine at 63 C to 70 C MIL-STD-202, Method 215 Terminal Strength 4 1/2 Pound Pull MIL-STD-202, Method 211, Condition A ENV30 Rev: OR 06/22/06 M File: ENV30.pdf This document and its contents are the property of Mini-Circuits. Page: 1
13 Mini-Circuits Environmental Specifications ENV30 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Barometric Pressure 100,000 Feet MIL-STD-202, Method 105, Condition D ENV30 Rev: OR 06/22/06 M File: ENV30.pdf This document and its contents are the property of Mini-Circuits. Page: 2
Features low conversion loss, 6.79 db typ. wideband, 1 to 1000 MHz. Applications HF/VHF/UHF cellular federal & defense communications
Surface Mount Frequency Mixer Level 7 ( Power +7 dbm) 1 to 1000 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power IF Current Pin Connections 1 RF 4 IF
Features low conversion loss, 6.11 db typ. excellent L-R isolation, 44 db typ. CONVERSION LOSS (db) Mid-Band m. Range f L. Conversion Loss (db)
Surface Mount Level 13 ( Power +13dBm) 2 to 500 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power Pin Connections 1 RF 4 IF 5 GROUND 2,3,6 Outline Drawing
Features low conversion loss, 5.94 db typ. aqueous washable J-leads for strain relief. CONVERSION LOSS (db) Mid-Band m. Range f L.
Surface Mount Frequency Mixer Level 7 ( Power +7dBm) 0.5 to 500 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power Pin Connections 1 RF 4 IF 5 GROUND 2,3,6
ADE-R3GLH+ CONVERSION LOSS 50. ISOLATION (db) 10 LO= +7 dbm LO= +10 dbm LO=+13 dbm FREQUENCY (MHz) RF VSWR
Surface Mount High Reliability Mixer Level 10 ( Power +10 dbm) 2000 to 2700 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power 50mW IF Current 40mA Permanent
Frequency Mixer wide band
High IP3 Frequency Mixer wide band Level 13 ( Power+13 dbm) 500 to 3500 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Power IF Current Pin Connections 200
LAVI-U252VH+ Performance Charts. LO=+18dBm LO=+21dBm LO=+24dBm. LO=+18dBm LO=+21dBm LO=+24dBm. LO=+18dBm LO=+21dBm LO=+24dBm
Up Converter Frequency Mixer Level 21 ( Power +21 dbm) 10 to 2500 MHz Maximum Ratings Operating Temperature -45 C to 85 C Storage Temperature -55 C to 100 C Power Pin Connections +24 dbm IF Power +21 dbm
Features low conversion loss, 6.05 db typ. good L-R isolation, 35 db typ, L-I, 30 db typ. wideband, 10 to 2000 MHz rugged shielded case
Coaxial Level 10 ( Power +10 dbm) 10 to 2000 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Power 50mW IF Current ma Permanent damage may occur if any of
Features wideband, 10 to 500 MHz. Applications military, hi-rel applications stabilizing generator outputs reducing amplitude variations
+ to +20dBm Limiter 50Ω Broadband to 500 MHz Maximum Ratings Operating Temperature -55 C to 0 C Storage Temperature -55 C to 0 C RF Power 0mW Permanent damage may occur if any of these limits are exceeded.
Limiter RLM Ω Broadband 950 to 2050 MHz. The Big Deal
+5 to +30 dbm Limiter 50Ω Broadband 950 to 2050 MHz The Big Deal High CW input power, 1 W Very low limiting output power, 0 dbm typ. Very fast response time, 2 nsec CASE STYLE: CK1246-1 Product Overview
fco, MHz Nom. * Not for use with DC voltage at input and output ports 3dB 1dB F co F 20 F R E QUE NC Y F R 20dB Frequency (MHz)
Coaxial Low Pass Filter Ω *DC to 27 MHz Maximum Ratings Operating Temperature - C to C Storage Temperature - C to C RF Power Input* W max. at 2 C DC Current Input to Output.A max. at 2 C * Passband rating,
Applications protects low noise amplifiers and other devices from ESD or input power damage military, hi-rel applications
+12 to +3dBm Limiter 5Ω Broadband 3 to 3 MHz Maximum Ratings Operating Temperature -55 C to 1 C Storage Temperature -55 C to 1 C RF Power 2W Permanent damage may occur if any of these limits are exceeded.
No need for external driver, saving PCB space and cost.
50Ω 5 to 2700 MHz High Power 3W The Big Deal High Port count in super small size Single Positive Supply Voltage, 2.5 4.8V High Power P0.1dB, 3W typ. Low Insertion Loss, 0.6 db at 1 GHz CASE STYLE: MT1817
SP6T RF Switch JSW6-23DR Ω High Power 3W 5 to 2000 MHz. The Big Deal
75Ω High Power 3W 5 to 2000 MHz The Big Deal High Port count in super small size High Power P0.1dB, 3W Low Insertion Loss, 0.7 db at 1 GHz CASE STYLE: MT1817 Product Overview is a high power reflective
Monolithic Amplifier GVA-60+ Flat Gain, High IP to 5 GHz. The Big Deal
Flat Gain, High IP3 Monolithic Amplifier 50Ω 0.01 to 5 GHz The Big Deal Excellent Gain Flatness and Return Loss over 50-1000 MHz High IP3 vs. DC Power consumption Broadband High Dynamic Range without external
USB Smart Power Sensor
50Ω -30 dbm to +20 dbm, 1 MHz to 8000 MHz The Big Deal Fast measurement speed, 10 msec USB HID device compatible with 32/64 Bit operating systems Includes Measurement Application GUI (Graphical User Interface)
USB Smart Power Sensor
USB Smart Power Sensor 50Ω -30 dbm to +20 dbm, 1MHz to 6000 MHz The Big Deal Low cost USB HID device compatible with 32 Bit operating system Includes Measurement Application GUI (Graphical User Interface)
FCPM-6000RC. Mini-Circuits P.O. Box , Brooklyn, NY (718)
USB / Ethernet Integrated Frequency Counter & Power Meter 50Ω -30 dbm to +20 dbm, 1 MHz to 6000 MHz The Big Deal Automatically synchronized power & frequency measurements USB and Ethernet control Includes
Features. = +25 C, IF= 100 MHz, LO= +13 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units
Features Passive Double Balanced Topology High LO/RF Isolation: 48 db Low Conversion Loss: 7 db Wide IF Bandwidth: DC - GHz Robust 1,000V esd, Class 1C Typical Applications The is ideal for: Point-to-Point
USB Smart Power Sensor
75Ω -30 dbm to +20 dbm, 100 khz to 2500 MHz The Big Deal 75Ω Impedance Low cost USB HID device compatible with 32/64 Bit operating systems Includes Measurement Application GUI (Graphical User Interface)
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES SGRF300 SGRF300D SGRF300DD SGRF303 SGRF303D SGRF303DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil
1.5 GHz to 4.5 GHz, GaAs, MMIC, Double Balanced Mixer HMC213BMS8E
FEATURES Passive: no dc bias required Conversion loss: 1 db typical Input IP3: 21 dbm typical RoHS compliant, ultraminiature package: 8-lead MSOP APPLICATIONS Base stations Personal Computer Memory Card
Features. = +25 C, IF = 1 GHz, LO = +13 dbm*
v.5 HMC56LM3 SMT MIXER, 24-4 GHz Typical Applications Features The HMC56LM3 is ideal for: Test Equipment & Sensors Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Functional Diagram
= +25 C, IF= 100 MHz, LO = +15 dbm*
v4.514 HMC62LC4 Typical Applications The HMC62LC4 is ideal for: Point-to-Point Point-to-Multi-Point Radio WiMAX & Fixed Wireless VSAT Functional Diagram Features General Description Electrical Specifications,
= +25 C, IF= 100 MHz, LO = +17 dbm*
v3.514 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Wide IF Bandwidth: DC - 3.5
Features. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units
v3.514 MIXER, 5.5-14. GHz Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Functional Diagram Features Passive Double Balanced
Features. = +25 C, IF = 0.5 GHz, LO = +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units
v1.514 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Features Passive: No DC Bias Required
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Ultra Low Noise Amplifier ~ RLNAMG Electrical Specifications, TA = +⁰C, Vcc = +V Features Gain: db Typical Noise Figure:.dB Typical PdB Output Power: +dbm Typical Supply Voltage: +V /ma Ohm Matched Typical
10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B
Data Sheet FEATURES Passive; no dc bias required Conversion loss 8 db typical for 1 GHz to 18 GHz 9 db typical for 18 GHz to 26 GHz LO to RF isolation: 4 db Input IP3: 19 dbm typical for 18 GHz to 26 GHz
6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A
FEATURES Conversion loss: 9 db typical Local oscillator (LO) to radio frequency (RF) isolation: 37 db typical LO to intermediate frequency (IF) isolation: 37 db typical RF to IF isolation: db typical Input
Silicon Double Balanced HMIC TM Mixer, MHz V2
Silicon Double Balanced HMIC TM Mixer, 3500 4500 MHz MA4EXP400H1277T Features + 24 dbm Typical Input IP3 7.7 db Typical Conversion Loss + 13 to + 19 dbm LO Drive Fully Balanced Passive Mixer NO External
HMC485MS8G / 485MS8GE. Features OBSOLETE. = +25 C, LO = 0 dbm, IF = 200 MHz*, Vdd= 5V
Typical Applications High Dynamic Range Infrastructure: GSM, GPRS & EDGE CDMA & W-CDMA Cable Modem Termination Systems Functional Diagram Features +34 dbm Input IP3 Conversion Loss: db Low LO Drive: -2
Orbital 694XA Series. Ka BAND EXTERNAL REFERENCE LNB with rear anchor posts. Wide range of Frequencies and Bandwidths LNB 1855R 1000 XA-WN60
Orbital 694XA Series Ka BAND EXTERNAL REFERENCE LNB with rear anchor posts Wide range of Frequencies and Bandwidths How to order an Orbital 694XA Series Ka Ext Ref LNB Frequencies (GHz): LO Input Output
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.514 MIXER, 5.5-14. GHz Typical
Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 70 MHz
Typical Applications Functional Diagram The HMC28AMS8 / HMC28AMS8E is ideal for: Base Stations PCMCIA Transceivers Cable Modems Portable Wireless Features Ultra Small Package: MSOP8 Conversion Loss: db
HMC219AMS8 / 219AMS8E. Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz
Typical Applications The HMC219AMS8 / HMC219AMS8E is ideal for: UNII & HiperLAN ISM Microwave Radios Functional Diagram Features Ultra Small Package: MSOP8 Conversion Loss: 8.5 db LO / RF Isolation: 25
OBSOLETE HMC215LP4 / 215LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
v1.111 LO AMPLIFIER, 1.7-4. GHz Typical Applications The HMC215LP4 / HMC215LP4E is ideal for Wireless Infrastructure Applications: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM &
HMC412BMS8GE MIXER - SINGLE & DOUBLE BALANCED - SMT. Typical Applications. Features. Functional Diagram. General Description
HMCBMSGE v1.1 Typical Applications The HMCBMSGE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Functional Diagram Features Conversion Loss: db Noise Figure: db LO to RF Isolation: db LO to
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.514 MIXER, 2.5-7. GHz Typical
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com HMC148* Product Page Quick Links Last Content Update: 11/1/216 Comparable
Features OBSOLETE. = +25 C, IF = 1.45 GHz, LO = +13 dbm [1]
![Features OBSOLETE. = +25 C, IF = 1.45 GHz, LO = +13 dbm [1]](/thumbs/84/90647033.jpg "Features OBSOLETE. = +25 C, IF = 1.45 GHz, LO = +13 dbm [1]")
v2.614 Typical Applications The HMC412AMS8G / HMC412AMS8GE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Functional Diagram Features General Description Parameter Min. Typ. Max. Units Frequency
= +25 C, IF= 100 MHz, LO = +15 dbm*
v3.514 Typical Applications Features The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Digital Radio VSAT Functional Diagram Wide IF Bandwidth: DC - 3.5 GHz Image Rejection: 35 db LO to RF
GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A
FEATURES Conversion loss: db LO to RF isolation: db LO to IF isolation: 3 db Input third-order intercept (IP3): 1 dbm Input second-order intercept (IP2): dbm LO port return loss: dbm RF port return loss:
Features. = +25 C, As a Function of LO Drive & Vdd. IF = 1 GHz LO = -4 dbm & Vdd = +4V
v4.414 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Integrated LO Amplifier: -4
Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +10 dbm. IF = 70 MHz
v1.112 HMC27AS8 / 27AS8E BALANCED MIXER,.7-2. GHz Typical Applications The HMC27AS8 / HMC27AS8E is ideal for: Base Stations Cable Modems Portable Wireless Functional Diagram Features Conversion Loss: 9
= +25 C, IF= 100 MHz, LO = +15 dbm*
v3.514 HMC52LC4 6-1 GHz Typical Applications Features The HMC52LC4 is ideal for: Point-to-Point and Point-to-Multi-Point Radio Digital Radio VSAT Functional Diagram Wide IF Bandwidth: DC - 3.5 GHz Image
Power Amplifier 0.5 W 2.4 GHz AM TR Features. Functional Schematic. Description. Pin Configuration 1. Ordering Information
Features Ideal for 802.11b ISM Applications Single Positive Supply Output Power 27.5 dbm 57% Typical Power Added Efficiency Downset MSOP-8 Package Description M/A-COM s is a 0.5 W, GaAs MMIC, power amplifier
CMD257C GHz High IP3 I/Q Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High IP3 Image rejection: 3 db Wide IF bandwidth Pb-free RoHs compliant 4x4 mm SMT package Description The is a high IP3 I/Q mixer in a leadless surface
Microwave MLCs. UQ Series High Q Ultra Low ESR MLC FEATURES: APPLICATIONS: RF Power Amplifiers Low Noise Amplifiers Filter Networks MRI Systems
FEATURES: Ultra Low ESR High Q High Self Resonance Capacitance Range 0.1 pf to 1000 pf APPLICATIONS: RF Power Amplifiers Low Noise Amplifiers Filter Networks MRI Systems HOW TO ORDER UQ CB 7 A 100 J A
Parameter Min. Typ. Max. Min. Typ. Max. Units
v1.214 HMC163LP3E Typical Applications The HMC163LP3E is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Sensors Functional Diagram Features
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.511 Typical Applications Features
TGA2238-CP 8 11 GHz 50 W GaN Power Amplifier
Applications X-band radar Data Links Product Features Frequency Range: 8 11 GHz P SAT : 47 dbm @ PIN = 23 dbm PAE: 34% @ PIN = 23 dbm Power Gain: 24 db @ PIN = 23 dbm Small Signal Gain: >28 db Return Loss:
Features. = +25 C, IF= 100 MHz, LO = +17 dbm*
v2.31 HMC-C44 1-23 GHz Typical Applications The HMC-C44 is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Features Wide
OBSOLETE HMC423MS8 / 423MS8E MIXERS - DBL-BAL - SMT. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications.
Typical Applications The HMC423MS8 / HMC423MS8E is ideal for: Base Stations Portable Wireless CATV/DBS ISM Functional Diagram Electrical Specifications, T A = +25 C Features Integrated LO Amplifi er w/
OBSOLETE HMC422MS8 / 422MS8E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
v4.712 Typical Applications The HMC422MS8 / HMC422MS8E is ideal for: MMDS & ISM Wireless Local Loop WirelessLAN Cellular Infrastructure Functional Diagram Electrical Specifications, T A = +2 C Features
Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz
v.211 HMC22AMS8 / 22AMS8E Typical Applications Features The HMC22AMS8 / HMC22AMS8E is ideal for: Microwave Radios VSAT Functional Diagram Ultra Small Package: MSOP8 Conversion Loss: 8.5 db Wideband IF:
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v4.414 Typical Applications Features
Features OBSOLETE. = +25 C, As an IRM. IF = MHz. Frequency Range, RF GHz. Frequency Range, LO
v.17 Typical Applications The is ideal for: Microwave Radio & VSAT Test Instrumentation Military Radios Radar & ECM Space Functional Diagram Electrical Specifications, T A = +25 C, As an IRM Parameter
Features. = +25 C, IF = 100 MHz, LO = 0 dbm, Vcc1, 2, 3, = +5V, G_Bias = +3.5V*
v3.1 LO AMPLIFIER, 7 - MHz Typical Applications The HMC684LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +32
ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors
ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: Lowest ESR in Class Highest Working Voltage in class 250V Standard EIA Size: 0603 Laser Marking (Optional) High Self Resonance
A 100 J A. Capacitance
SQCS (0603) SQCF (005) Ultra Low ESR MLC HOW TO ORDER SQ CS V FEATURES: A 00 J A Low ESR High Q High Self Resonance Capacitance Range pf to 240 pf EIA Size APPLICATIONS: RF Power Amplifiers Low Noise Amplifiers
ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors
ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: Lowest ESR in Class Highest Working Voltage in class 250V Standard EIA Size: 0603 Laser Marking (Optional) RoHS Compliant
MICROLITHIC DOUBLE-BALANCED MIXER
Page 1 The is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units
Features Passive: No DC Bias Required Input IP3: +2 dbm LO/RF Isolation: 3 db Wide IF Bandwidth: DC - 8 GHz Typical Applications The is ideal for: Telecom Infrastructure Military Radio, Radar & ECM Space
Non Magnetic Connectors Product Catalog
Non Magnetic Connectors Product Catalog Introduction Johnson s Non-Magnetic Connector Additions Offer Solutions to MR Imaging Technology Johnson, a product line of Cinch Connectivity Solutions, has expanded
STEVAL-TDR007V1. 3 stage RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E. Features. Description
3 stage RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E Features N-channel enhancement-mode lateral MOSFETs Excellent thermal stability Frequency: 1030 MHz Supply voltage:
Features. = +25 C, As a Function of LO Drive
Typical Applications v.411 The is ideal for: Basestations, Repeaters & Access Points WiMAX, WiBro & Fixed Wireless Portables & Subscribers PLMR, Public Safety & Telematics Functional Diagram Features Passive
HMC581LP6 / 581LP6E MIXERS - SMT. HIGH IP3 RFIC DUAL DOWNCONVERTER, MHz. Typical Applications. Features. Functional Diagram
Typical Applications The HMC1LP6 / HMC1LP6E is ideal for Wireless Infrastructure Applications: GSM, GPRS & EDGE CDMA & W-CDMA Cellular / 3G Infrastructure Functional Diagram Features +26 dbm Input IP3
MAMX Sub-Harmonic Pumped Mixer GHz Rev. V1. Functional Schematic. Features. Description. Pin Configuration 1
MAMX-119 Features Up or Down Frequency Mixer Low Conversion Loss: 11 db 2xLO & 3xLO Rejection: db RF Frequency: 14 - LO Frequency: 4-2 GHz IF Frequency: DC - 7 GHz Lead-Free 1.x1.2 mm 6-lead TDFN Package
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES SRF00 SRF00D SRF00DD SRF0 SRF0D SRF0DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil transient suppression
GaAs MMIC Double Balanced Mixer. Description Package Green Status
GaAs MMIC Double Balanced Mixer MM132HSM 1. Device Overview 1.1 General Description The MM132HSM is a GaAs MMIC double balanced mixer that is optimized for high frequency applications. MM1-832HSM is a
HMC412MS8G / 412MS8GE
v.91 HMC4MS8G / 4MS8GE MIXER, 9. - 15. GHz Typical Applications The HMC4MS8G / HMC4MS8GE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Features Conversion Loss: 8. db Noise Figure: 8. db
MICROLITHIC DOUBLE-BALANCED MIXER
ML1-936 The ML1-936 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.55 Typical Applications The is
Features. = +25 C, IF= 1 GHz, LO= +13 dbm* Parameter Min. Typ. Max. Units
Typical Applications The is ideal for: Telecom Infrastructure Military Radio, Radar & ECM Space Systems Test Instrumentation Functional Diagram Features Wide IF Bandwidth: DC - 13 GHz Passive: No DC Bias
GaAs MMIC Double Balanced Mixer
Page 1 The is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor. Accurate,
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
LEADER OF RF BROADBAND SOLTIONS Clarke & Severn Electronics Ph + Email sales@clarke.com.au www.clarke.com.au RFSPTA000GSB Absorptive Coaxial SPT Switch 0. - 0GHz Electrical Specifications, TA = + C, SB
GaAs MMIC Double Balanced Mixer
Page 1 The is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor. Low
Wide Band Power Amplifier 6GHz~12GHz. Parameter Min. Typ. Max. Units Frequency Range 6 12 GHz Gain db Gain Flatness ±2.0 ±3.
RFLPAGGA Wide Band Power Amplifier ~ Electrical Specifications, TA = +⁰C, Vcc = +V Features Gain: db Typical Output power: +dbm Typical High PdB: +dbm Typical Supply Voltage: +V Ohm Matched Input / Output
Features OBSOLETE. LO = +19 dbm, IF = 100 MHz Parameter
Typical Applications The HMC351S8 / HMC351S8E is ideal for: Cellular Basestations Cable Modems Fixed Wireless Access Systems Functional Diagram Electrical Specifications, T A = +25 C Features Conversion
QPC6222SR GENERAL PURPOSE DPDT TRANSFER SWITCH. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information
Product Overview The is a dual-pole double-throw transfer switch designed for general purpose switching applications where RF port transfer (port swapping) control is needed. The low insertion loss along
GaAs DOUBLE-BALANCED MIXER
MM1-124S The MM1-124S is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form
Parameter LO RF IF Min Typ Max Diode Option (GHz) (GHz) (GHz) LO drive level (dbm)
Page MMIQHSM The MMIQHSM is a miniaturized, surface-mount multi-octave.7. GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and power divider. It can be used
MICROLITHIC DOUBLE-BALANCED MIXER
ML15 The ML15 is a Microlithic double balanced mixer. As with all Microlithic mixers (patent pending), it features excellent conversion loss, isolations, and spurious performance across a broad bandwidth
4400X Series. Orbital. X-Band Ext Ref LNB. MIL Spec MIL-STD A, 45 db internal filter LNB630S-500X-WN60-G12. Orbital Features: Orbital Specs:
Orbital 4400X Series X-Band Ext Ref LNB 4400X Series, X-Band Ext Ref LNB with Universal 12-hole gasket input isolator. MIL Spec MIL-STD-188-164A, 45 db internal filter How to order an Orbital 4400X Series
GaAs MMIC Double Balanced Mixer
Page 1 The is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications. As with all Marki Microwave mixers, it features excellent conversion loss, isolation and spurious
Features. = +25 C, 50 Ohm System
v1.111 47 Analog Phase Shifter, Typical Applications The is ideal for: EW Receivers Military Radar Test Equipment Satellite Communications Beam Forming Modules Features Wide Bandwidth: 47 Phase Shift Low
TGA GHz 30W GaN Power Amplifier
Applications Electronic Warfare Commercial and Military Radar Product Features Functional Block Diagram Frequency Range: 6-12 GHz Output Power: > 45 dbm (PIN = 23 dbm) PAE: > 25 % (PIN = 23 dbm) Large
FMMX9004 DATA SHEET. Field Replaceable SMA IQ Mixer From 15 GHz to 23 GHz With an IF Range From DC to 3.5 GHz And LO Power of +17 dbm.
FMMX94 Field Replaceable SMA IQ Mixer From 15 GHz to 23 GHz With an IF Range From DC to 3.5 GHz And LO Power of +17 dbm FMMX94 is an I/Q double balanced millimeter-wave mixer module that operates across
Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *
Typical Applications The is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +38 dbm 8 db Conversion Loss @ 0 dbm LO Optimized
DATASHEET ISL Features. Applications. Ordering Information. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier
DATASHEET ISL008 NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PART ISL01 Data Sheet MMIC Silicon Bipolar Broadband Amplifier FN21 Rev 0.00 The ISL00, ISL007, ISL008 and ISL009, ISL0, ISL011
CMD255C GHz High IP3 Fundamental Mixer. Features. Functional Block Diagram. Description
Features Functional Block Diagram Low conversion loss High IP3 High isolation Wide IF bandwidth Pb-free RoHs compliant 3x3 mm SMT package Description The CMD255C3 is a general purpose double balanced mixer
FMMX9002 DATA SHEET. Field Replaceable SMA IQ Mixer From 8.5 GHz to 13.5 GHz With an IF Range From DC to 2 GHz And LO Power of +19 dbm.
FMMX92 Field Replaceable SMA IQ Mixer From 8.5 GHz to 13.5 GHz With an IF Range From DC to 2 GHz And LO Power of +19 dbm FMMX92 is an I/Q double balanced millimeter-wave mixer module that operates across
GaAs DOUBLE-BALANCED MIXER
The MM1-312S is a high linearity passive double balanced MMIC mixer. The S diode offers superior 1 db compression, two tone intermodulation performance, and spurious suppression to other GaAs MMIC mixers.
GaAs DOUBLE-BALANCED MIXER
MM1-3H The MM1-3H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *
Typical Applications The is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +38 dbm 8 db Conversion Loss @ 0 dbm LO Optimized
MICROLITHIC DOUBLE-BALANCED I/Q MIXER
MLIQ-416 The MLIQ-416 is a miniaturized, multi-octave 4-16 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either
GaAs DOUBLE-BALANCED MIXER
MM1-185H The MM1-185H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form
LoopBack Relay. SGLB363 Series. With Built-in AC Bypass Capacitors / DC LoopBack Relay
LoopBack Relay SGLB363 Series With Built-in AC Bypass Capacitors / DC LoopBack Relay SERIES DESIGNATION SGLB363 RELAY TYPE LoopBack Relay, Sensitive Coil, Surface Mount Ground Shield and J-Leads with AC
GaAs MMIC High Dynamic Range Mixer
Page 1 MT3-113HCQG The MT3-113HCQG is a triple balanced passive diode GaAs MMIC mixer offering high dynamic range, low conversion loss, and excellent repeatability. As with all T3 mixers, this mixer offers
Parameter Min. Typ. Max. Min. Typ. Max. Units
Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features db Conversion Gain Image Rejection: