ADVR-08. Universal Hybrid Analog-Digital Voltage Regulator Operation Manual

Transcription

1 Universal Hybrid Analog-Digital Voltage egulator Operation Manual Universal Hybrid Analog/Digital 2 lines sensing 8 Amp AV with multiple power input capability such as Full Harmonic (Compound Windings), Harmonic + Auxiliary Winding, PMG and HUN. Compatible with Leroy omer 449. P POWEWOLD LD Willows, Waterside, yhall, tamford, Lincs, PE9 4EY, UK el: info@sp-powerworld.com

2 ECION 1 : PECIFICAION ensing Input (E1, E2) External Volts Adjustment (V1, V2) Voltage Vac 1 phase +/- 4% 500 ohms 1 watt potentiometer Vac +/- 8% 1K ohms 1 watt potentiometer Vac Vac oft tart amp ime Frequency 50/60 Hz selectable 4 sec. Power Input (X1, X2) Over Excitation Protection Voltage Vac, 1 phase Inverse-time 170 +/- 5 power input 220 Vac Frequency Hz Auxiliary Input (Aux1, Aux2) Unit Power Dissipation Max.6 watts Voltage Vac, 1 phase Frequency Hz EMI uppression Internal EMI filtering Output (F+, F-) Voltage Max. 63 input 110 Vac Quadrature Droop Input (1, 2, 3) Max. 125 input 220 Vac C 5A (1-2) or 1A (2-3) > 5VA Current Continuous 8A Max. +/- P.F +/- 0.7 Intermittent 12A for 10 sec. esistance 8 power input 110 Vac Analogue Input (A1, A2) 16 power input 220 Vac Maximum input +/- 5 Vdc Fuse pec. 5 x 20mm A (slow blow type) ensitivity +/- 25% Generator Volts (adjustable) Input resistance > 2K ohms Burden in HUN & PMG Wiring 880 power input 110 Vac Under Frequency Protection (Factory Knee Point etting) 1760 power input 220 Vac 50 Hz system presets knee point at 47 Hz 60 Hz system presets knee point at 57 Hz Voltage egulation Knee point Frequency Drift: C < +/- 0.5% ( with 4% engine governing ) Environment ypical ystem esponse Operation emperature C AV response 20 ms torage emperature C elative Humidity Max. 95% Build Up Voltage Vibration K Hz esidual voltage at AV power input terminal > 6 25 Hz Dimensions (L) x (W) x 50.0 (H) mm Voltage hermal Drift 0.03% per C change in AV ambient Weight 820 g +/- 2% AENION Carefully set the AV sensing voltage from 110 to 480 Vac using DIP witch W 4 & 5. 2

3 ECION 2 : OULINE / IZE / INALLAION EFEENCE erminal : Fast-On terminals 6.35 mm (1/4 inch) Flag erminal ( Fast-On terminal) Figure 1 Outline Drawing AENION Meggers and high-potential test equipment must not be used as it could damage the AV. 3

4 ECION 3 : DIP WICH POGAMMING & ADJUMEN ON W OFF ON 1 60Hz 50Hz W KW <90 90~500 >500 2 OFF OFF ON 3 OFF ON ON V 90~ ~ ~520 4 OFF OFF ON 5 OFF ON ON W W OFF ON 6 O/E ON O/E OFF (61) 40(50) HZ HZ 3 10 NOE For more detail about IV Generator Auxiliary Excitation Booster please visit KUAI website. 4

5 ECION 4 : WIING CONNECION PMG 200VAC max 50~500HZ (Harmoni) AUX. wires 1-2 N:5A 2-3 N:1A Figure 2 ingle & hree Phase PMG 1-2 N:5A 2-3 N:1A Figure 3 hree Phase Auxiliary Winding (Full Harmonic) N Harmoni wires AUX. wires 1-2 N:5A 2-3 N:1A 1-2 N:5A 2-3 N:1A Figure 4 Auxiliary & Harmonic Figure 5 elf-excited (HUN) 5

6 Droop % 2 1 OU2 OU1 ime ON est Output IV Fuse eady est Batt-Volt OVLD B B N:5A 2-3 N:1A Figure 6 with IV-1260 / IV-2460 AENION 1. All AC voltage readings are average value only. 2. Use a remote 500 ohms 1 watt external V for +/- 4% adjustment range. (keep shorted if not used) 3. Use a remote 1K ohms 1 watt external V for +/- 8% adjustment range. 4. If your PMG is not working you can also power the AV in shunt using terminals X1 & X2 connected to the output of the generator as long as it s less than 300 Vac. Use only the replacement fuses specified in this user manual. Appearance and specifications of products are subject to change for improvement without prior notice. 6