Product group 1. Product description. At a glance. Cable entry systems for entering pre-terminated cables

Transcription

1 Product group 1 Cable entry systems for entering pre-terminated cables At a glance The patented cable entry system enables the user to enter, seal and provide strain relief for pre-terminated and standard cables. Patent The key feature of Icotek s patented system is the split frame and split inserts which provide quick, convenient and cost effective routing of pre-terminated and standard cables. The split frame and split insert alleviate the need to cut and re-wire pre-terminated cables. Therefore, cable warranties are unaffected. Cables, pipes and conduits with various diameters can be routed due to the split frame and split inserts. When assembled correctly, the split inserts are held tightly within the frame. Correctly sizing the insert to the cable diameter ensures a high degree of protection (IP 4) and provides strain relief. Benefits 1. Split system Split inserts are positively guided into the frame. This ensures a tight seal around the cables and strain relief according to DIN-EN No new punch out tools required Drilling templates, as well as cut outs according to the standard dimensions for multi pole connectors (for example from Harting, Wieland). 3. Tight connection Uniquely designed frame and inserts assures a tight, secure unit. 4. Flexibility Standard inserts are designed to accomodate only one cable. Utilizing inserts that pass two and four cables greatly increases packing density. 4

2 Product group 1 Cable entry system for entering pre-terminated cables Chapter content Cable entry frames 24 / 16 / / -B / -E Page 6 - Cable entry frames 24 extension parts Page Flange enclosure -FG Page 14-1 IP6 Assembly instruction -SEAL kit Page 16 SNAP frames -SNAP Page 17 Split cable glands KVT / KVT-SNAP / KVT-W90 Page KT Service box Service box for cable inserts Page 23 Inserts and plugs KT klein / KT groß / KTMB / DT / ST Page Cable entry for flat cables -FL / FT Page Cable entry frames 183 / KTMB 183 Page Cable entry frames -JUMBO / KTF Page 34-3 Cable entry frames -Quick Page Split cable glands QVT Page 38 Pluggable cable glands QVT-CLICK Page 39 Cable entry frames -QTA / -QTE Page Cap for attachment housings -AD Page 42 Inserts QT Page 43 tel +49 (0) fax +49 (0)

3 24 Cable entry frames Split inserts Description Type Order No. Inserts KT PU small large The 24 matches exactly the cut-out dimensions of 24-pole standard industrial connectors The split insert matching the cable diameter is placed around the cable and inserted into the cable entry frame. Either a cut out of 36mm or 46mm tall can be chosen depending on the cables being routed. This flexibility is perfect for pre-terminated cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and inserts Strain relief according DIN EN Cut-out dimensions Height Polyamide IP 4, with gasket and correct selection of the cable inserts - 40 C to C (static) 36 x 112 mm / page mm KT Cable inserts -SNAP SNAP frames -EMC Cable collector KDR2 KDR Base plates FP Flanged plates MP Module plates Page Page 17 Page Page 0 Page Page 112 6

4 16 Cable entry frames Split inserts Type Order No. Inserts KT PU Description small large The 16 matches exactly the cut-out dimensions of 16-pole standard industrial connectors. The split insert matching the cable diameter is placed around the cable and inserted into the cable entry frame Either a cut out of 36mm or 46mm tall can be chosen depending on the cables being routed. This flexibility is perfect for pre-terminated cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and inserts Strain relief according DIN EN Cut-out dimensions Height Polyamide IP 4, with gasket and correct selection of the cable inserts - 40 C to C (static) 36 x 86 mm / page mm KT Cable inserts -SNAP SNAP frames -EMC Cable collector KDR Base plates FP Flanged plates Page Page 17 Page Page 0 Page

5 Cable entry frames Split inserts Descripton Type Order No. Inserts KT PU small large The matches exactly the cut-out dimensions of -pole standard industrial connectors , The split insert matching the cable diameter is placed around the cable and inserted into the cable entry frame. 98,3 83,8 Either a cut out of 36mm or 46mm tall can be chosen depending on the cables being routed. This flexibility is perfect for pre-terminated cables. 8 32, Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and inserts Strain relief according DIN EN 0262 Cut-out dimensions Height Polyamide IP 4, with gasket and correct selection of the cable inserts - 40 C to C (static) 36 x 6 mm / page mm KT Cable inserts -SNAP SNAP frames -EMC Cable collector Page Page 17 Page

6 B Cable entry frames Split inserts Type Order No. Inserts KT PU Description small large 72,8 8 - B The -B matches exactly the cut-out dimensions of 46 x 46 mm measuring instruments. 72,8 8,8 The split insert matching the cable diameter is placed around the cable and inserted into the cable entry frame. - B For routing cables and conduits up to 34 mm diameter.,8 Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly Space saving shape Small cut-out, high packing density Strain relief according DIN EN 0262 Cut-out dimensions Height Polyamide IP 4, with gasket and correct selection of the cable inserts - 40 C to C (static) 46 x 46 mm / page mm KT Cable inserts -SNAP SNAP frames -EMC Cable collector FP Flanged plates Page Page 17 Page Page 6 9 9

7 - E Cable entry frames Description Type Order Cut-out Inserts KT PU No. [mm] small large The cable entry frames -E are particularly suited for flat connectors. The small frame is ideal for applications with limited space. -E x For inserting cables up to 17 mm diameter. -E x Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly Space saving shape Optimal for D-Sub connectors Strain relief according DIN EN E x Drilling template Height Polyamide IP 4, with gasket and correct selection of the cable inserts - 40 C to C (static) see page mm 39, 26, ,8 -E x 24 - KT Cable inserts -EMC Cable collector Page Page 92 94

8 24 - E Cable entry frames Type Order No. Inserts KT PU Description small large, E , The 24-E offers a larger frame size for routing a greater amount of cables, pipes or conduits E , 13 38, The cable entry frames 24-E series are frames extended with an additional middle frame for routing additional cables. Thus allowing the quick, easy and cost effective routing solution for up to 60 cables E , 13 38,8 Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density Strain relief according DIN EN Cut-out dimensions Height Polyamide IP 4, with gasket and correct selection of the cable inserts - 40 C to C (static) 62 x 112 mm / page mm KT Cable inserts -EMC Cable collector Page Page

9 24 - MT Cable entry frames Description Type Order No. Inserts KT PU small large,8 The 24-MT provides additional cable routing possibilities - route up to 80 cables MT The cable entry frames 24-MT series are frames extended with an additional middle frame for routing additional cables. Thus allowing the quick, easy and cost effective routing solution for up to 80 cables., Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density Strain relief according DIN EN , MT MT Cut-out dimensions Height Polyamide IP 4, with gasket and correct selection of the cable inserts -40 C to C (static) 82 x 112 mm / page mm , MT KT Cable inserts -EMC Cable collector Page Page

10 24-2MT Cable entry frames Type Order No. Inserts KT PU Description small large, MT MT , The 24-2MT is our largest frame offering with the ability to route up to 120 cables. The cable entry frames 24-2MT series are frames extended with two additional middle frames for routing additional cables. Thus allowing the quick, easy and cost effective routing solution for up to 120 cables MT ,8 147 Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density Strain relief according DIN EN MT ,8 Cut-out dimensions Height Polyamide IP 4, with gasket and correct selection of the cable inserts -40 C to C (static) 126 x 112 mm / page mm 130, MT KT Cable inserts -EMC Cable collector Page Page

11 - FG Flange enclosure Description Type Order No. Inserts KT PU small large The cable entry frames range -FG are suited for installation, sealing and strain relief of pre-terminated cables and conduits at an angle of 90 to the cabinet. -FG A For routing cables and conduits up to 34 mm diameter. -FG A Installation at an angle of 90 0 to the cabinet Mechanical protection of cable directly at the place of entry Protection against water spray and drips Warranty of pre-terminated cables remains Strain relief according DIN EN FG A Cut-out dimensions ABS IP 4, with gasket and correct selection of the cable inserts - 40 C to C (static) 36 x 112 mm, page KT Cable inserts -SNAP SNAP frames -EMC Cable collector Page Page 17 Page tel +49 (0) fax +49 (0)

12 - FG Flange enclosure Type Order No. Inserts KT PU Description small large -FG B The cable entry frames range -FG are suited for installation, sealing and strain relief of pre-terminated cables and conduits at an angle of 90 to the cabinet. For routing cables and conduits up to 34 mm diameter. -FG B Installation at an angle of 90 0 to the cabinet Mechanical protection of cable directly at the place of entry Protection against water spray and drips Warranty of pre-terminated cables remains Strain relief according DIN EN 0262 Cut-out dimensions ABS IP 4, with gasket and correct selection of the cable inserts - 40 C to C (static) 46 x 36 mm, page KT Cable inserts -SNAP SNAP frames -EMC Cable collector Page Page 17 Page

13 - SEAL kit IP6 Assembly instruction for Assembly instruction Assembly instruction for cable entry frames using -SEAL kit to achieve protection class IP6. Different applications, materials and mounting surfaces will affect the IP integrity. Ensure the mounting surface is smooth and free of debris. Inserts must be properly sized to cable diameter. Each application should be thoroughly tested taking into consideration the above details. A A A - SEAL kit (0g): Order No Grease the frame parts which come in contact with inserts as well as the frame parts contacting themselves. We recommend the icotek -SEAL kit be applied to all areas marked with A in above figure (green shaded areas). Assembly The -SEAL kit may be used only with the cable entry frames and KT inserts listed below, protection class IP 6 is reached Cable entry frames B4 - E - FG B4 / A B If two inserts contact in a frame, please ensure that the splitted side of the inserts never face to the same direction. KT Inserts Please use KT2 - KT14 inserts only Please use inserts only for one cable Please note the clamping ranges for the inserts given in the catalog If two inserts make contact in a frame, please ensure that the split side of the inserts never face to the same direction. 16

14 - SNAP SNAP frames Type Order No. Fits Cut-out PU Description for [mm] - SNAP B4 - SNAP B -Quick B 46 x x 6 The -SNAP frame provides quick assembly of the system when necessary. Control panels already in the factory can be equipped with the -SNAP frame allowing a simple push in of the frame once the associated equipment is delivered to the factory. A cut-out of 46 mm also can be chosen instead of 36mm. Thus pre-fabricated multi pole connectors can be used. - SNAP 16 - SNAP Quick FG A -Quick x 8 46 x 112 Upon disassembly (e.g. maintenance) screwing and unscrewing of -frame is not necessary Previously assembled frames are quickly and easily attached Integrated gasket in SNAP-frame Drilling template identical to -frame (except -SNAP B4) - SNAP 24E E 71 x Drilling template Polyamide IP 4-40 C to C (static) see page SNAP 24MT MT 89 x Cable entry frames -QUICK Cable entries MP Module plates BPK-SNAP Blind plates Page 6 1 Page 36 < 37 Page 112 Page

15 KVT Split cable glands Description Type Order Inserts KT Thread PU No. small large Thread length KVT is a circular split frame for quick and easy installation of cables or complete cable harnesses. Polyamide locknuts are included in the shipment. KVT 2* M2 x 1. Length: 14 mm For routing SUB-D, DVI or PROFIBUS connectors in combination with the split cable glands KVT, special locknuts with cut-outs are required. The cut-out dimensions are listed on page 126. * max. Cable diameter 1mm KVT M32 x 1. Length: 14 mm Locknuts Special locknuts with cut-outs are separate available. KVT 32 + KGM-SUB-D M32 x 1. Length: 14 mm KGM-SUB-D9 (Order No. 4) fits SUB-D9 connectors. KVT M40 x 1. Length: 14 mm KGM-PB (Best.Nr. 47) fits DVI and PROFIBUS connectors. KGM-SUB-D2 (Order No. 48) fits SUB-D2 connectors. KVT 40 + KGM-PB M40 x 1. Length: 14 mm 18

16 KVT Split cable glands Type Order Inserts KT Thread PU Description No. small large Thread length KVT KVT KGM-SUB-D M0 x 1. Length: 14 mm M0 x 1. Length: 14 mm Insertion of pre-terminated cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety Suitable for standard or metric cut-outs Polyamide locknuts are included in the shipment KVT 63 1** KVT 63 4** M63 x 1. Length: 14 mm M63 x 1. Length: 14 mm Colour Cut-out dimension Polycarbonate similar RAL 703 IP 4, with gasket and correct selection of the cable inserts - 30 C to + 0 C (static) metric standard sizes KT Cable inserts KVT-EMC bracket Locknuts Page Page 9 Page 126 ** For KVT 63 a locknut M63 (brass-nickel plated) is included in delivery. 19

17 KVT 80 Split cable glands Description Type Order No. Inserts KT PU small large The KVT 80 split cable glands are designed for routing and sealing pre-terminated cables. By connecting the two half-shells with attached screws, the inserts provide sufficient pressure on the routed cables to obtain a high degree of strain relief. The KVT 80 is applicable for wall thicknesses from 1. mm to mm. KVT KVT Insertion of pre-terminated cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety Provides very good strain relief Quick and easy assembly from the front side Note When mounting the KVT 80 on sheet metal, we recommend the following torque values: 1. mm sheet = 1 Nm From 2.0 mm sheet = 1. Nm Colour Cut-out dimension Polycarbonate similar RAL 703 IP 4, with gasket and correct selection of the cable inserts - 30 C to + 0 C (static) 80 mm diameter KT Inserts Page tel +49 (0) fax +49 (0)

18 KVT - SNAP Split cable glands Type Order Inserts KT Thread PU Description No. small large Thread length KVT - SNAP M32 x 1. Length: 11 mm KVT is a circular split frame for quick and easy installation of cables or complete cable harnesses. Pre terminated cables can be routed through thick walls (> mm) e.g. into cast junction boxes by using the model KVT-SNAP, without the use of tools. KVT - SNAP M40 x 1. Length: 11 mm * For KVT 63 a locknut M63 (brass-nickel plated) is included in delivery. Assembly KVT - SNAP 63 4* M63 x 1. Length: 11 mm SNAP ring is screwed into metric thread tapped into housing (or it can be fastened with a lock nut). Once the SNAP ring is affixed to the housing the KVT equipped with cables is simply pushed into the SNAP ring. Quick and easy installation! KVT - SNAP 63 1* M63 x 1. Length: 11 mm KGM PA, grey M32 x 1. Colour Cut-out dimension Polycarbonate similar RAL 703 IP 4, with gasket and correct selection of the cable inserts - 30 C to + 0 C (static) metric standard cut-outs KGM PA, grey M40 x 1. KGM PA, grey M63 x KT Cable inserts KVT-EMC bracket Locknuts Page Page 9 Page 126

19 KVT - W90 Split cable glands Description Type Order No. Inserts KT Thread PU with locknut small large Thread length The split KVT-W90 cable glands are used to insert and seal pre-terminated cables and conduits at a 90 0 angle. In particular, the KVT 0-W90 is perfectly suited to hold corrugated or smooth hoses. A large number of cable entry inserts is available to the user. KVT 32 - W M32 x 1. Length: 11. mm Polyamide locknuts are included in the shipment. GMT M32 x 1. Installation at an angle of 90 0 to the cabinet Insertion of pre-terminated cables and conduits Warranty of pre-terminated cables remains Suitable for standard or metric cut-outs KVT W M0 x 1. Length: 11. mm Colour Polycarbonate IP 4, with gasket and correct selection of the cable inserts - 30 C to + 0 C (static) similar RAL 703 KVT W M0 x 1. Length: 11. mm KT Cable inserts WST Conduit, split KVT-EMC bracket Locknuts Page Page 120 Page 9 Page 126 GMT M0 x 1. 22

20 KT Service box Service box for cable inserts KT Service box for cable inserts Convenient - everything readily available! The service box is perfect for installations and service calls. The KT service box ensures your KT inserts are readily available. Order No Content Cable inserts, small: KT for cables 2-17 mm BTK blind inserts KTMB multi-range inserts KT-ASI for ASI-Bus cables Cable inserts, large: KT for cables mm BTG blind inserts / ATG adapter inserts KTMB multi-range inserts The correct size of the KT inserts can easily be determined by using the cable template : -frames KVT split cable gland KZL strain relief plate Cable template Determining the diameter of the cable using the cable template Selecting the KT inserts according the data on the cable template Cable templates can also be ordered separatly (Order-No ). 23

21 21 KT Inserts, small 21 Description Type Order No Order No Clamping range PU grey black BTK BTK Blind insert KT cable inserts small are used with the following cable entry frames: - Page FG - Page 14-1 KVT - Page KVT-W90 - Page 22 The model range KT small is designed for cable diameters from 2 to 17mm. Assembly When installing the insert, the smooth side of the insert faces the middle of the cable entry frame. KT grey Elastomer - 40 C to+ 90 C (static) KT KT mm KT mm KT mm KT mm KT mm KT mm KT mm KT mm KT mm KT mm KT mm KT mm KT mm KT mm KT tele KTs mm KTs mm KT black KT oval KT tele Telephone cable Elastomer UL-94 HB - 30 C to + 90 C (static) higher chemical resistance, UV-stabilized KT S1 KT oval approx. 8 x 4 mm KT S

22 21 KT Inserts, small 21 Type Order No Order No Clamping range PU Description grey black KT x ø 2 mm KT 2 x KT x ø 3 mm KT x ø 4 mm KT x ø mm KT x ø 6 mm KT cable inserts small are used with the following cable entry frames: KT x ø 7 mm KT x ø 8 mm KT x ø 2 mm KT x ø 3 mm KT 4 x - Page FG - Page 14-1 KVT - Page KVT-W90 - Page 22 The model range KT small is designed for cable diameters from 2 to 17mm. KT x ø 4 mm KT x ø mm KT x ø 6 mm KT ASI2 rl KT-ASI ASI-cable KT-ASI2 rl ASI-cables KT-ASI2 ll ASI-cables Assembly When installing the insert, the smooth side of the insert faces the middle of the cable entry frame. KT grey KT ASI2 ll Elastomer - 40 C to+ 90 C (static) KTRS KTRS KTRS KTRS KT black Elastomer UL-94 HB - 30 C to + 90 C (static) higher chemical resistance, UV-stabilized 2

23 KT Inserts, large 41, 42 Description Type Order No. Order No. Clamping range PU grey black ATG ATG Adapter insert The KT inserts large accept a wide range of cable diameters from 16 to 34 mm. They are used with the following cable entry frames: - Page FG - Page 14-1 KVT / KVT-W90 - Page Page 32 BTG BTG Blind insert or - 20 mm ATG adapter inserts provide the possibility to hold a small KT insert to reduce the clamping range down to 2 mm. KT 28 KT mm KT mm KT mm KT grey Elastomer - 40 C to+ 90 C (static) KT mm KT mm KT mm KT mm KT mm KT mm KT black KT mm KT mm Elastomer UL-94 HB - 30 C to + 90 C (static) higher chemical resistance, UV-stabilized KT mm KT mm KT mm KT mm KT mm KT mm 26

24 21 41,0 KTMB Inserts, multi-range KTMB large KTMB small Type Order No. Size Clamping range PU Description grey KT KTMB-A KT small mm KTMB-D KTMB-B KT small mm KTMB-C KT small 6. - mm KTMB-D KT small mm KTMB The KTMB inserts accept a wide range of cable diameters. A great benefit when exact cable diameter is not known in advance. The KTMB inserts are not split and therefore only usable for cables without connectors. KTMB-E KT small mm Cross section KTMB KTMB grey KTMB-G KT large mm KTMB-H 4146 KT large mm Elastomer - 40 C to+ 90 C (static) KTMB-I KT large mm KTMB-J 4147 KT large mm The correct size of the KT inserts can easily be determined by using the cable template. Determining the diameter of the cable using the cable template Selecting the KT inserts according the data on the cable template KTMB-K KT large 2x mm Order-No

25 DT Cable entry inserts Description Type Order No. Number of PU cables The DT cable inserts are designed for standard cables (without connectors). A large number of cables can be routed utilizing minimal space. DT x max. 6. mm 2x max mm DT inserts are designed to fit in KT large insert spaces: B - Page Extensions - Page FG - Page Page 32 DT x max. 7.1 mm DT x max. 6. mm 3x max. 9. mm 3x max mm Combination of routing pre-terminated and standard cables with one cable entry frame Enables a sub-assembly of cable harnesses High packing density DT x max. 9. mm Elastomer IP 4-40 C to + 90 C (static) 28

26 ST Plugs Type Order No. Diameter Length PU Description D L ST mm 2 mm 2 ST mm 2 mm 2 ST mm 2 mm 2 ST mm 2 mm 2 ST mm 2 mm 2 Plugs are used to close either KT inserts or -DPZ cable entry plates not equipped with cables. Perfect for appplications where cables have been removed. ST mm 2 mm 2 ST mm 20 mm 2 ST mm 20 mm 2 ST mm 20 mm 2 Sealing unused cable entries ST mm 20 mm 2 ST mm 20 mm 2 ST mm 20 mm 2 ST mm 20 mm 2 ST mm 20 mm 2 ST mm 20 mm 2 Polyamide, white IP 4-40 C to C ST mm 20 mm 2 ST ASI mm 2 KT + DT Cable inserts Cable entry plates DPZ Cable entry plates DP Page Page 46 1 Page

27 - FL Cable entry for flat cables Description Type Order Cut-out Inserts PU No. [mm] KT FT - FL A x 24 0x KT 1x FT - 1 The - FL range enables a simple, fast and flexible cable routing and sealing of flat wires. Split or non-split inserts can be utilized. - FL B 46 6 x 24 0x KT 1x FT - 2 Innovative construction of the inserts compensates for manufacturing inconsistencies in flat cables. - FL C x 24 1x KT 1x FT FL D x 24 0x KT 1x FT - 3 Routing of flat cables in combination with pre-terminated round cables by using a single cable entry frame Space saving shape - FL E - FL F x x 24 1x KT 1x FT - 2 0x KT 2x FT FL G x 24 2x KT 1x FT - 1 Drilling template Polyamide IP 4, with gasket and correct selection of the cable inserts - 40 C to C (static) see page FL H - FL I x x 24 2x KT 1x FT - 2 1x KT 2x FT FL J x 24 3x KT 1x FT - 1 FT Cable inserts, flat KT Cable inserts, small -EMC Cable collector Page 31 Page 24 2 Page FL K x 24 1x FT - 1 1x FT FL L x 24 1x FT- 4 30

28 FT Inserts for flat cables Type Order No. Clamping range PU Description grey FT Blind insert FT - 1 A 462 Width: mm Thickness: mm The range of FT inserts are used to route flat cables. Suitable cable entry frames are the -FL range (see page 30). FT - 1 B Width: mm Thickness: mm Innovative construction of the inserts compensates for manufacturing inconsistencies in flat cables. FT - 1 C Width: mm Thickness: mm FT Blind insert Routing of flat wires with various dimensions FT - 2 A 4620 Width: mm Thickness:.0 -. mm FT - 2 B 4621 Width: mm Thickness: mm FT - 2 C 4622 Width: mm Thickness: mm Elastomer - 40 C to + 90 C (static) FT Blind insert FT - 3 A Width: mm Thickness:.0 -. mm FT - 4 A Width: mm Thickness: mm -FL Cable entry frames Page 30 31

29 183 Cable entry frames Description Type Order.No. Inserts KT PU KT 183 KT large The new version of the split cable entry frame 183 enables the user to route cables and tubes with a diameter up to 7 mm and to seal in accordance with IP For cables up to 34 mm the cable inserts KT large can be used. With the split cable inserts, pre-terminated cables can be routed. For cables up to 7 mm we have created new inserts KTMB for 183 (see page 33). These are not split and have a defined port for pushing the cable through Installation of cables up to 7 mm Inserts allow dynamic and flexible movement of rigid cables Retrofitting and maintenance can be carried out easily and quickly Cut-out dimensions Polyamide IP 4 with gasket and correct selection of the cables - 40 C bis C (static) see page KTMB Cable inserts for 183 DT/ KT Cable inserts Page 33 Page

30 KTMB Inserts for 183 Type Order.No. Clamping range PU grey KTMB-O 414 Blind insert 1 KTMB-P mm 1 The inserts KTMB-P to KTMB-S are suitable for cable diameters up to 7 mm. These inserts can be used with the 183 cable entry frames. These multi-range inserts are not split and have a defined port for pushing the cable through. The blind insert KTMB-O is completely closed. After cutting the membrane (cable diameter minus mm) it can be used also as a multi diameter insert for cables up to mm KTMB-Q mm 1 Spezification Brandklasse Schutzart Temperatur Eigenschaften Elastomer IP 4-40 C bis + 90 C (static) KTMB-R mm Cable entry frames Page 32 KTMB-S mm 1 33

31 - JUMBO Cable entry frames Description Type Order No. Dimension PU length width height The -JUMBO cable entry system for installation of cables and conduits with a diameter up to 6 mm, especially suited for supply cables. - JUMBO x 116 x 3 1 The innovative insert design enables dynamic and flexible movement. We recommend round cut-outs, which can be made using standard tools. Suggested cut-out: cable diameter %. - JUMBO x 116 x 3 1 Installation of cables up to 6 mm KTF-inserts allow dynamic and flexible movement Retrofitting and maintenance can be carried out easily and quickly Cut-out dimensions Polyamide IP 4-40 C to C (static) round, cable diameter + 1% KTF Cable inserts KDR2 Split base plates MP Module plates Page 3 Page 2 3 Page

32 KTF Inserts for -JUMBO KT large KTA Type Order No. Clamping range PU grey KTF Blind Insert 1 KTA Adapter Insert for KT large 1 The inserts range KTF are suitable for cable diameters up to 6 mm. Suitable -JUMBO cable entry frames, see page 34. KTF mm 1 Comparativly small assembled cables with large inserts can be routed by using the adapter insert. KTF mm 1 KTF mm 1 KTF mm 1 KTF mm 1 Elastomer IP 4-40 C to + 90 C (static) KTF mm 1 KTF mm 1 - JUMBO Cable entry frames KT large Page 34 Page 26 KTF mm 1 3

33 - QUICK Cable entry frames Description Type Order No. Cut-out Inserts PU [mm] The -QUICK range is a compact system to route and seal assembled cables. After populating the entry frame with inserts and cables, the two halves of the cable entry frame are SNAPped together without using tools. Inserts of the QT range are used , -QUICK B x 46 4 QT Quick and safe assembly without using any tools or screws Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and inserts , -QUICK B x 46 2 QT Drilling template Polyamide IP 4, with gasket and correct selection of the cable inserts - 40 C to C (static) see page QUICK x 86 8 QT, QT Cable inserts -SNAP SNAP frames - EMC Cable collector Page 43 Page 17 Page

34 QUICK Cable entry frames Alternative fastening: For quick fastening of -QUICK we developed QUICK-PIN. The expansion pins are pressed into the existing bore holes. The flat seal and the -QUICK cable entry frame will be fixed by pressing the threaded pins into the expansion pins. Description Type Order No. Cut-out Inserts PU [mm] 120 3, -QUICK x 86 4 QT The -QUICK range is a compact system to route and seal assembled cables. After populating the entry frame with inserts and cables, the two halves of the cable entry frame are SNAPped together without using tools. Inserts of the QT range are used , -QUICK x 112 QT Quick and safe assembly without using any tools or screws Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety of frames and inserts , -QUICK x 112 QT Drilling template Polyamide IP 4, with gasket and correct selection of the cable inserts - 40 C to C (static) see page Fastening-set QUICK-PIN QT Cable inserts -SNAP SNAP frames - EMC Cable collector Page 43 Page 17 Page

35 QVT Split cable glands Description Typs Order Cable Thread PU No. Inserts Thread length QVT is a circular split frame for quick and easy installation of cables or complete cable harnesses. QVT x QT M20 x 1. Length: 13 mm The QVT range is especially suitable for small machines, devices and instruments, because of the extremly small structure. QVT x QT M2 x 1. Length: 13 mm Compact and small structure Routing of assembled cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly Suitable for metric or standard hole sizes Locknut is part of delivery. QVT x QT M32 x 1. Length: 13 mm Colour Cut-out dimension Polycarbonate similar RAL 703 IP 4, with gasket and correct selection of the cable inserts - 30 C to + 0 C (static) metric standard sizes QVT x QT M40 x 1. Length: 13 mm QT Cable inserts KVT-EMC bracket KGM locknut Page 43 Page 9 Page 126 QVT x QT M0 x 1. Length: 13 mm 38

36 QVT - CLICK Pluggable cable glands Type Order Cable PU Description No. Inserts QVT - CLICK x QT QVT-CLICK is a circular split frame for quick and easy installation of cables or complete cable harnesses. The QVT range is especially suitable for small machines, devices and instruments, because of the extremly small structure. QVT - CLICK x QT QVT - CLICK x QT Compact and small structure Routing of pre-terminated cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly Suitable for metric or standard hole sizes Assembly within seconds For wall thickness mm Quick and easy assembly from the front side Colour Cut-out dimension Polycarbonate similar RAL 703 IP 4, with gasket and correct selection of the cable inserts - 30 C to + 0 C (static) metric standard sizes QT Cable inserts Page 43 39

37 - QTA Cable entry frames Description Type Order No. Order No. Cut-out Cables PU Type A Type B [mm] 44 The -QTA easily routes pre-terminated and standard cables without using tools. pre-terminated 2x 3-1 mm QTA DP x 3 conventional 16x max. 7 mm 1x max. 12 mm 1x max. 16 mm Quick assemly without tools High packing density by using multi inserts Simple assembly and diasassembly in case of change or service Routing of pre-terminated and standard cables in a high packing density Suitable for standard cut-outs QTA x 3 pre-terminated 4x 3-1 mm Type A: Type B: Elastomer IP 4, with correct selection of the cable inserts (QT single) - 40 C to + 90 C (static) for wall thickness mm for wall thickness mm - QTA B x 4. pre-terminated 4x 3-1 mm QT Cable inserts FP Flanged plates KDR1 base plates Page 43 Page 6 7 Page

38 - QTA - QTE Cable entry frames Type Order No. Order No Cut-out Cables PU Description Type A Type B [mm] pre-terminated non-pre-term. 12 -QTA ø 32 1x 3-1 mm - 37, The -QTA easily routes pre-terminated and standard cables without using tools. 12 -QTA ø 0 2x 3-1 mm - 9 Quick assemly without tools High packing density by using multi inserts Simple assembly and diasassembly in case of change or service Routing of pre-terminated and standard cables in a high packing density 6,4 2,3 -QTE ø 20 1x mm 1x max..2 mm 24 -QTE ø 20 1x mm 1x max..2 mm 6,4 2,3 24 (QTA) Cut-out dimension Elastomer IP 4, with correct selection of the cable inserts (QT single) - 40 C to + 90 C (static) metric standard sizes -QTE ø 20 1x mm 1x max..2 mm 6,4 2,3 Type A: Type B: for wall thickness mm for wall thickness mm 24 -QTE ø 20 1x mm 1x max..2 mm 6,4 2,3 24 QT Cable inserts -AD Cap for attachment housing Page 43 Page 42 41

39 - AD Cap for attachment housing Description Type Order Fits for PU No adaptor is designed to be attached to the bases of multi-pole housings (standard industrial connectors). The parts can be equipped with -DP (when using standard cables) or -QTA (when using pre-terminated cables). In addition -QTE can be installed into the -AD 24 type ,4 - AD 16-A 436 -DP 32 Type A -QTA 32 Type A 44 61,4 - AD 24-A DP 32 Type A -QTA 32 Type A -QTE 20 x Fits on all standard attachment housings High flexibility in selection of cable entry Quick assembly and disassembly Flmae class Polyamide IP 4-40 C to C (static) -QTA Cable entries -DP Cable entry frames Page 41 Page 4 42

40 QT Inserts Insert QT in combination with QVT-CLICK Type Order No. Clamping range PU Description grey QTB 4240 Blind insert QT mm QT mm QT mm QT mm QT mm QT mm QT mm The QT range supports cable diameters from 3 to 1 mm. They are used with the following cable entry frames: -Quick - Page QVT / QVT-CLICK - Page QTA - Page QT mm QT mm QT mm QT mm QT mm QT x ø 3 mm Assembly When installing the insert, the smooth side of the insert has to face the middle of the cable entry frame. QT x ø 4 mm QT x ø mm QT x ø. mm QT x ø 6 mm QT x ø 6. mm QT x ø 7 mm Elastomer - 40 C to+ 90 C (static) QT x ø 3 mm QT x ø 4 mm QT x ø 4. mm QT x ø mm QT x ø. mm QT x ø 6 mm QT-ASI x ASI-cable QT-ASI x ASI-cable QT tele 427 Telephone cable -QUICK Cable entries QVT Cable glands -QTA Cable entries Page Page Page