Maintenance/ Discontinued
|
|
- Stewart Maxwell
- 6 years ago
- Views:
Transcription
1 A/D, D/C Converters for Image Signal Processing MN65531AS Low Power 6-Bit CMOS A/D Converter for Image Processing Overview The MN65531AS is a totally parallel 6-bit CMOS analog-to-digital converter with a maximum conversion rate of 0 MSPS. It includes a built-in 3-input multiplexer, clamp circuit, and reference voltage power supply. Features Maximum conversion rate: 0 MSPS (min.) Linearity error: ±0.5 LSB (typ.) Differential linearity error: ±0.5 LSB (typ.) Power supply voltage: 5.0 ±0.5 V Power consumption: 100 mw (typ.) Built-in 3-input multiplexer, clamp circuit, and reference voltage power supply Applications Digital television receivers Digital video equipment Picture in picture systems Digital image processing equipment Pin Assignment V RB V RT ASM B Y IN R Y IN Y IN AV SS DV SS SY SR Y SB Y (TOP VIEW) SOP0-P AV DD DV DD D6 D5 D4 D3 D D1 CLK CCP YCP includes following four Product lifecycle stage. SDJ00006BEM 1
2 MN65531AS A/D, D/C Converters for Image Signal Processing Block Diagram 7 AV SS AVDD 8 DVSS 1 DVDD V RT V RB Y IN R-Y IN B-Y IN YCP Clamp 13 CCP A=1 A=1 Multiplexer SB-Y SR-Y SY 3 ASM Latch Encoder (Duplex Quasi Grey) Clock Generator 14 CLK Output Buffer D1 (MSB) D D3 D4 D5 D6 (LSB) includes following four Product lifecycle stage.
3 A/D, D/C Converters for Image Signal Processing MN65531AS Pin Descriptions Pin No. Symbol Function Description 1 V RB Reference voltage output (BOTTOM) V RT Reference voltage output (TOP) 3 ASM Analog monitor 4 B Y IN Analog input (B-Y) 5 R Y IN Analog input (R-Y) 6 Y IN Analog input (Y) 7 AV SS Ground for analog circuits 8 DV SS Ground for digital circuits 9 SY Multiplexer control (Y) 10 SR Y Multiplexer control (R-Y) 11 SB Y Multiplexer control (B-Y) 1 YCP Clamp pulse (Y) 13 CCP Clamp pulse (R-Y, B-Y) 14 CLK Clock input 15 D1 Digital output (MSB) 16 D Digital output 17 D3 Digital output 18 D4 Digital output 19 D5 Digital output 0 D6 Digital output (LSB) 1 DV DD Power supply for digital circuits AV DD Power supply for analog circuits Absolute Maximum Ratings Ta=5 C Parameter Symbol Rating Unit Power supply voltage for digital circuits DV DD 0.3 to +7.0 V Power supply voltage for analog circuits AV DD 0.3 to +7.0 V Input voltage V I AV SS 0.3 to AV DD +0.3 V Output voltage V O DV SS 0.3 to DV DD +0.3 V Operating ambient temperature T opr 0 to +75 C Storage temperature T stg 55 to +15 C Recommended Operating Conditions V DD =DV DD =AV DD =5.0V, V SS =DV SS =AV SS =0V, Ta=5 C, C C =1µF Parameter Symbol min typ max Unit Power supply voltage V DD V includes following four Product lifecycle stage. Clock input "H" level V CH 0.7 V DD V DD V voltage "L" level V CL V SS 0.8 V Digital input "H" level V IH 0.7 V DD V DD V voltage "L" level V IL V SS 0. V DD V Clamp pulse width t CP µs 3
4 MN65531AS A/D, D/C Converters for Image Signal Processing Electrical Characteristics DV DD =AV DD =5.0V, DV SS =AV SS =0V, Ta=5 C Parameter Symbol Conditions min typ max Unit Power supply current I DD f CLK =0MHz 0 40 ma Resolution RES 6 bit Linearity error E L ±1.0 LSB Differential linearity error E D ±1.0 LSB Maximum conversion rate F c(max.) 0 MSPS Reference voltage output (bottom) V RB 0.38 V DD 0.40 V DD 0.4 V DD V Reference voltage output (top) V RT 0.78 V DD 0.80 V DD 0.8 V DD V Clamp current I CP V CP ± 0.1V ±0.5 ±0.8 ma Output "H" level I OH V OH =V DD 0.8V ma current "L" level I OL V OL =0.4V ma Output delay time t d C L =50pF ns Analog input capacitance C I 15 pf includes following four Product lifecycle stage. 4
5 A/D, D/C Converters for Image Signal Processing MN65531AS Timing Chart 1. A/D converter and multiplexer timing SY SR-Y SB-Y (ASM) D1 to 6 CLK. Clamp timing YIN YCP R-YIN B-YIN CCP R-Y1 (VRT) (VRB) (VRT) (VRM) (VRB) Y1 B-Y1 R-Y1 Y1 Y R-Y B-Y1 includes following four Product lifecycle stage. 5
6 MN65531AS A/D, D/C Converters for Image Signal Processing Package Dimensions (Unit:mm) SOP0-P ± (1.9) ±0.1 New Package Dimensions (Unit: mm) SOP0-P-0375B (Lead-free package) Seating plane 7.±0..0±0. 0.1±0.1.4 max. 9.4± ±0. Note) The package of this product will be changed to the following lead-free type (SOP0-P-0375B). 15.7± ± ± max. 9.40± min. 0.3 min. (1.85) ±0.0 0 to 10 includes following four Product lifecycle stage. Seating plane 0.10±0.10 Seating plane 6
7 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. () The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. includes following four Product lifecycle stage.
Maintenance/ Discontinued
A/D, D/C Converters for Image Signal Processing MN657011H Low Power 8-Bit, 3-Channel CMOS D/A Converter for Image Processing Overview The MN657011H is an 8-bit, 3-channel CMOS digitalto-analog converter
More informationMaintenance/ Discontinued
A/D, D/C Converters for Image Signal Processing MN6570F, MN6570TF, and MN6570EF Low Power 8-Bit, 3-Channel CMOS D/A Converters for Image Processing Overview The MN6570F, MN6570TF, and MN6570EF are highspeed
More informationMaintenance/ Discontinued
CCD Delay Line Series MN3S PAL-Compatible CCD Video Signal Delay Element Overview The MN3S is a CCD signal delay element for video signal processing applications. It contains such components as a shift
More informationMaintenance/ Discontinued
Delay Line Series MN33S Full Multi-AL-Compatible Video Signal Delay Element Overview The MN33S is a signal delay element for video signal processing applications. It contains such components as a shift
More informationMaintenance/ Discontinued
CCD Delay Line Series MN390S NTSC-Compatible CCD H Video Signal Delay Element Overview The MN390S is a H image delay element of a f SC CMOS CCD and suitable for video signal processing applications. It
More informationMaintenance/ Discontinued
CCD Delay Line Series MNS NTSC-Compatible CCD Video Signal Delay Element Overview The MNS is a CCD signal delay element for video signal processing applications. It contains such components as a shift
More informationMaintenance/ Discontinued
CCD Delay Line Series MN3870S NTSC-Compatible CCD Comb Filter with Built-in H Video Signal Delay Element Overview The MN3870S is a 4 f SC CMOS CCD comb filter with a built-in 4 f SC CMOS CCD signal delay
More informationMaintenance/ Discontinued
For Video Equipment Color Video Camera Synchronizing Signal Generator LSI Overview The generates color video camera synchronizing signals for the NTSC, PAL, and SECAM video systems. It divides the reference
More informationMaintenance/ Discontinued
CCD Area Image Sensor MN3FT.5mm (type-/) 0k pixels CCD Area Image Sensor Overview The MN3FT is a.5 mm (type-/) interline transfer CCD (IT-CCD) solid state image sensor device with a total of 3,0 pixels.
More informationMaintenance/ Discontinued
CCD Delay ine Series MN38663S NTSC-Compatible CCD Video Delay Element Overview The MN38663S is a CCD signal delay element for video signal processing applications. It contains such components as a threefold-frequency
More informationMaintenance/ Discontinued
For Video Equipment MNS External Synchronization Control LSI for Color Video Cameras Overview The MNS is an external synchronization control LSI for color video cameras. When used in combination with a
More informationMaintenance/ Discontinued
6.0mm (type-1/3) 768H s Overview The MN3718FT and MN3718AT are 6.0mm (type-1/3) interline transfer CCD (IT-CCD) solid state image sensor devices. This device uses photodiodes in the optoelectric conversion
More informationMaintenance/ Discontinued
For Information Equipment MN83951 TFT LCD Panel Controller Overview The MN83951 is a timing controller for displaying an analog video signal on a TFT color liquid crystal display panel in such applications
More informationMaintenance/ Discontinued
CCD Linear Image Seor MN36 6-Bit CCD Linear Image Seor Overview The MN36 is a 6-pixel high seitivity CCD linear image seor combining photo-sites using low dark output floating photodiodes and CCD analog
More informationTOSHIBA CCD LINEAR IMAGE SENSOR CCD(Charge Coupled Device) TCD132D
TOSHIBA CCD LINEAR IMAGE SENSOR CCD(Charge Coupled Device) TCD132D The TCD132D is a 1024 elements linear image sensor which includes CCD drive circuit and signal processing circuit. The CCD drive circuit
More information3-Channel 8-Bit D/A Converter
FUJITSU SEMICONDUCTOR DATA SHEET DS04-2316-2E ASSP 3-Channel -Bit D/A Converter MB409 DESCRIPTION The MB409 is an -bit resolution ultra high-speed digital-to-analog converter, designed for video processing
More information74F273 Octal D-Type Flip-Flop
Octal D-Type Flip-Flop General Description The 74F273 has eight edge-triggered D-type flip-flops with individual D inputs and Q outputs. The common buffered Clock (CP) and Master Reset (MR) inputs load
More informationV6118 EM MICROELECTRONIC - MARIN SA. 2, 4 and 8 Mutiplex LCD Driver
EM MICROELECTRONIC - MARIN SA 2, 4 and 8 Mutiplex LCD Driver Description The is a universal low multiplex LCD driver. The version 2 drives two ways multiplex (two blackplanes) LCD, the version 4, four
More informationMaintenance/ Discontinued
CCD Linear Image Seor MN3646 88-Bit High-Respoivity CCD Linear Image Seor Overview The MN3646 is a 88-pixel high seitivity CCD linear image seor combining photo-sites using low dark output floating photodiodes
More informationHCF4054B 4 SEGMENT LIQUID CRYSTAL DISPLAY DRIVER WITH STROBED LATCH FUNCTION
4 SEGMENT LIQUID CRYSTAL DISPLAY DRIVER WITH STROBED LATCH FUNCTION QUIESCENT CURRENT SPECIF. UP TO 20V OPERATION OF LIQUID CRYSTALS WITH CMOS CIRCUITS PROVIDES ULTRA LOW POWER DISPLAYS EQUIVALENT AC OUTPUT
More informationCCD Signal Processor For Electronic Cameras AD9801
a FEATURES 10-Bit, 18 MSPS A/D Converter 18 MSPS Full-Speed CDS Low Noise, Wideband PGA Internal Voltage Reference No Missing Codes Guaranteed +3 V Single Supply Operation Low Power CMOS: 185 mw 48-Pin
More information. The vertical pull-in range is approximately 10 Hz at fv = 60 Hz.
Ordering number: EN2781B Monolithic Linear IC CRT Display Synchronization Deflection Circuit Overview The is a sync-deflection circuit IC dedicated to CRT display use. It can be connected to the LA7832/7833,
More informationHCF4027B DUAL J-K MASTER SLAVE FLIP-FLOP
DUAL J-K MASTER SLAVE FLIP-FLOP SET RESET CAPABILITY STATIC FLIP-FLOP OPERATION - RETAINS STATE INDEFINETELY WITH CLOCK LEVEL EITHER HIGH OR LOW MEDIUM-SPEED OPERATION - 16MHz (Typ. clock toggle rate at
More informationDP8212 DP8212M 8-Bit Input Output Port
DP8212 DP8212M 8-Bit Input Output Port General Description The DP8212 DP8212M is an 8-bit input output port contained in a standard 24-pin dual-in-line package The device which is fabricated using Schottky
More information74F377 Octal D-Type Flip-Flop with Clock Enable
74F377 Octal D-Type Flip-Flop with Clock Enable General Description The 74F377 has eight edge-triggered, D-type flip-flops with individual D inputs and Q outputs. The common buffered Clock (CP) input loads
More informationComplete 12-Bit 40 MHz CCD Signal Processor AD9945
Complete 12-Bit 40 MHz CCD Signal Processor AD9945 FEATURES 40 MSPS Correlated Double Sampler (CDS) 6 db to 40 db 10-Bit Variable Gain Amplifier (VGA) Low Noise Optical Black Clamp Circuit Preblanking
More informationHCF40193B PRESETTABLE UP/DOWN COUNTERS (DUAL CLOCK WITH RESET) BINARY TYPE
PRESETTABLE UP/DOWN COUNTERS (DUAL CLOCK WITH RESET) BINARY TYPE INDIVIDUAL CLOCK LINES FOR COUNTING UP OR COUNTING DOWN SYNCHRONOUS HIGH-SPEED CARRY AND BORROW PROPAGATION DELAYS FOR CASCADING ASYNCHRONOUS
More informationComplete 10-Bit, 25 MHz CCD Signal Processor AD9943
a FEATURES 25 MSPS Correlated Double Sampler (CDS) 6 db to 40 db 10-Bit Variable Gain Amplifier (VGA) Low Noise Optical Black Clamp Circuit Preblanking Function 10-Bit, 25 MSPS A/D Converter No Missing
More informationDM74LS377 Octal D-Type Flip-Flop with Common Enable and Clock
October 1988 Revised March 2000 DM74LS377 Octal D-Type Flip-Flop with Common Enable and Clock General Description The DM74LS377 is an 8-bit register built using advanced low power Schottky technology.
More informationTIL311 HEXADECIMAL DISPLAY WITH LOGIC
TIL311 Internal TTL MSI IC with Latch, Decoder, and Driver 0.300-Inch (7,62-mm) Character Height Wide Viewing Angle High Brightness Left-and-Right-Hand Decimals Constant-Current Drive for Hexadecimal Characters
More informationUNISONIC TECHNOLOGIES CO., LTD TL431
UNISONIC TECHNOLOGIES CO., LTD TL431 PROGRAMMABLE PRECISION REFERENCE DESCRIPTION The UTC TL431 is a three-terminal adjustable regulator with a guaranteed thermal stability over applicable temperature
More informationComplete 10-Bit/12-Bit, 25 MHz CCD Signal Processor AD9943/AD9944
a FEATURES 25 MSPS Correlated Double Sampler (CDS) 6 db to 40 db 10-Bit Variable Gain Amplifier (VGA) Low Noise Optical Black Clamp Circuit Preblanking Function 10-Bit (AD9943), 12-Bit (AD9944), 25 MSPS
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD PROGRAMMABLE PRECISION REFERENCE. DESCRIPTION The UTC TL431 is a three-terminal adjustable regulator with a guaranteed thermal stability over applicable temperature ranges.
More informationSMA5101. SANYO Semiconductors DATA SHEET SMA5101. Features. Specifications. Silicon Monolithic Linear IC RF Double Balanced Mixer IC
Ordering number : ENA1839 SANYO Semiconductors DATA SHEET Silicon Monolithic Linear IC RF Double Balanced Mixer IC Features Wide band : up to Ku band Low distortion : IIP3=20dBm (@ICC > 11mA) SMT, Ultra
More informationDM Segment Decoder/Driver/Latch with Constant Current Source Outputs
DM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits
More informationComplete 12-Bit 40 MHz CCD Signal Processor AD9945
Complete 12-Bit 40 MHz CCD Signal Processor AD9945 FEATURES 40 MSPS Correlated Double Sampler (CDS) 6 db to 40 db 10-Bit Variable Gain Amplifier (VGA) Low Noise Optical Black Clamp Circuit Preblanking
More informationLA7837, Vertical Deflection Circuit with TV/CRT Display Drive. Package Dimensions
Ordering number:enn3313c Monolithic Linear IC LA7837, 7838 ertical Deflection Circuit with T/CRT Display Drive Overview The LA7837, 7838 are vertical deflection output ICs developed for use in high-grade
More informationObsolete Product(s) - Obsolete Product(s)
OCTAL BUS TRANSCEIVER/REGISTER WITH 3 STATE OUTPUTS HIGH SPEED: f MAX = 60 MHz (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.)
More informationVideo Accessory IC Series Sync Separation ICs with Built-in AFC BA7046F, BA7071F Rev.A 1/9
Video Accessory IC Series Sync Separation ICs with Built-in AFC BA7046F, BA7071F No.10069EAT03 Description The BA7046F and BA7071F perform synchronization signal separation of a NTSC mode or PAL mode video
More informationComplete 14-Bit 30 MSPS CCD Signal Processor AD9824
a FEATURES 14-Bit 30 MSPS A/D Converter 30 MSPS Correlated Double Sampler (CDS) 4 db 6 db 6-Bit Pixel Gain Amplifier (PxGA ) 2 db to 36 db 10-Bit Variable Gain Amplifier (VGA) Low Noise Clamp Circuits
More informationunit:mm (6.82)
Ordering number:enn5017 Thick Film Hybrid IC STK792-110 Vertical Deflection Output Circuit for CTV and CRT Displays Overview The STK792-110 is a vertical output amplifier and supply switching circuit hybrid
More informationDM Segment Decoder Driver Latch with Constant Current Source Outputs
DM9368 7-Segment Decoder Driver Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits
More informationSMPTE-259M/DVB-ASI Scrambler/Controller
SMPTE-259M/DVB-ASI Scrambler/Controller Features Fully compatible with SMPTE-259M Fully compatible with DVB-ASI Operates from a single +5V supply 44-pin PLCC package Encodes both 8- and 10-bit parallel
More informationUNISONIC TECHNOLOGIES CO., LTD 89CXX/89NXX Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD 89CXX/89NXX Preliminary CMOS IC LOW OLTAGE FREE DELAY TIME SETTING OLTAGE DETECTOR IC SERIES DESCRIPTION UTC 89CXX and 89NXX series are adjustable output delay oltage Detector
More informationS6B CH SEGMENT DRIVER FOR DOT MATRIX LCD
64 CH SEGMENT DRIVER FOR DOT MATRIX LCD June. 2000. Ver. 0.0 Contents in this document are subject to change without notice. No part of this document may be reproduced or transmitted in any form or by
More information55GN01CA. SANYO Semiconductors DATA SHEET 55GN01CA. Features. Specifications
Ordering number : ENA1111A GN01CA SANYO Semiconductors DATA SHEET GN01CA Features High cutoff frequency : ft=.ghz typ High gain : S1e =9.dB typ (f=1ghz) Specifications Absolute Maximum Ratings at Ta= C
More informationDM Segment Decoder/Driver/Latch with Constant Current Source Outputs
7-Segment Decoder/Driver/Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits to drive
More informationMT x 12 Analog Switch Array
MT885 8 x 2 Analog Switch Array Features Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5V to 3.2V 2Vpp analog signal capability R ON 65 max. @ V DD
More informationDS2176 T1 Receive Buffer
T1 Receive Buffer www.dalsemi.com FEATURES Synchronizes loop timed and system timed T1 data streams Two frame buffer depth; slips occur on frame boundaries Output indicates when slip occurs Buffer may
More information+25 dbm MATCHED POWER AMPLIFIER FOR Bluetooth TM Class 1
GaAs INTEGRATED CIRCUIT µpg51t6m +5 dbm MATCHED POWER AMPLIFIER FOR Bluetooth TM Class 1 DESCRIPTION The µpg51t6m is a fully matched, +5 dbm GaAs MMIC power amplifier for Bluetooth Class 1. This device
More informationINTEGRATED CIRCUITS DATA SHEET. TDA4510 PAL decoder. Product specification File under Integrated Circuits, IC02
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC02 March 1986 GENERAL DESCRIPTION The is a colour decoder for the PAL standard, which is pin sequent compatible with multistandard decoder
More informationMT8806 ISO-CMOS 8x4AnalogSwitchArray
MT886 ISO-CMOS 8x4AnalogSwitchArray Features Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5 V to 3.2 V 2Vpp analog signal capability R ON 65 max. @
More information74LVQ374 Low Voltage Octal D-Type Flip-Flop with 3-STATE Outputs
74LVQ374 Low Voltage Octal D-Type Flip-Flop with 3-STATE Outputs General Description The LVQ374 is a high-speed, low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and
More informationTA48M025F,TA48M03F,TA48M033F TA48M0345F,TA48M04F,TA48M05F
TOSHIBA Bipolar Linear Integrated Silicon Monolithic TA48M025F,TA48M03F,TA48M033F TA48M0345F,TA48M04F,TA48M05F 2.5, 3, 3.3, 3.45, 4, 5 Three-Terminal Low Dropout oltage Regulator The TA48M**F series consists
More informationCDK3402/CDK bit, 100/150MSPS, Triple Video DACs
CDK3402/CDK3403 8-bit, 100/150MSPS, Triple Video DACs FEATURES n 8-bit resolution n 150 megapixels per second n ±0.2% linearity error n Sync and blank controls n 1.0V pp video into 37.5Ω or load n Internal
More informationGaAs MULTI-CHIP MODULE MC-7883
DATA SHEET GaAs MULTI-CHIP MODULE MC-7883 870 MHz CATV 22 db POWER DOUBLER AMPLIFIER DESCRIPTION The MC-7883 is a GaAs Multi-chip Module designed for use in CATV applications up to 870 MHz. This unit has
More informationComplete 12-Bit 30 MSPS CCD Signal Processor AD9845B
Complete 12-Bit 30 MSPS CCD Signal Processor AD9845B FEATURES Pin Compatible with AD9845A Designs 12-Bit 30 MSPS A/D Converter 30 MSPS Correlated Double Sampler (CDS) 4 db 6 db 6-Bit Pixel Gain Amplifier
More information64CH SEGMENT DRIVER FOR DOT MATRIX LCD
64CH SEGMENT DRIVER FOR DOT MATRIX LCD INTRODUCTION The (TQFP type: S6B2108) is a LCD driver LSI with 64 channel output for dot matrix liquid crystal graphic display systems. This device consists of the
More informationL, S-band Medium Power SPDT Switch
RF SWITCH CG2179M2 L, S-band Medium Power SPDT Switch DESCRIPTION The CG2179M2 is a phemt GaAs SPDT (Single Pole Double Throw) switch. This device can operate from 0.05 GHz to 3.0GHz, having low insertion
More information74F574 Octal D-Type Flip-Flop with 3-STATE Outputs
74F574 Octal D-Type Flip-Flop with 3-STATE Outputs General Description The F574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The
More informationPower Supply and Watchdog Timer Monitoring Circuit ADM9690
a FEATURES Precision Voltage Monitor (4.31 V) Watchdog Timeout Monitor Selectable Watchdog Timeout 0.75 ms, 1.5 ms, 12.5 ms, 25 ms Two RESET Outputs APPLICATIONS Microprocessor Systems Computers Printers
More informationCHIMEI INNOLUX DISPLAY CORPORATION
DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT043TN20 Date: 2010/05/10 Version: 01 Preliminary Specification Final Specification Remark 4.3 FOG (FPC:44.05mm) For Customer s Acceptance
More informationL, S-band Medium Power SPDT Switch
RF SWITCH CG2214M6 L, S-band Medium Power SPDT Switch DESCRIPTION The CG2214M6 is a phemt GaAs SPDT (Single Pole Double Throw) switch. This device can operate from 0.05 to 3.0 GHz, having low insertion
More informationDATA SHEET. NEC's WIDE BAND SINGLE CONTROL CMOS SPDT SWITCH PART NUMBER PACKAGE MARKING SUPPLYING FORM
DATA SHEET FEATURES NEC's WIDE BAND SINGLE CONTROL CMOS SPDT SWITCH SUPPLY VOLTAGE : 1.8 to 3.3 V (2.8 V TYP.) SINGLE SWITCH CONTROL VOLTAGE: Vcont (H) = 1.8 to 3.3 V (2.8 V TYP.) Vcont (L) = 0.2 to +0.2
More informationVGA to DVI Extender over Fiber SET
VGA to DVI Extender over Fiber SET Model #: FO-VGA-DVI 2011 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. ( Avenview ) products. Avenview
More informationDATA SHEET. 870 MHz CATV 22 db POWER DOUBLER AMPLIFIER
DATA SHEET GaAs MULTI-CHIP MODULE MC-7846 870 MHz CATV 22 db POWER DOUBLER AMPLIFIER DESCRIPTION The MC-7846 is a GaAs Multi-chip Module designed for use in CATV applications up to 870 MHz. This unit has
More informationMT8812 ISO-CMOS. 8 x 12 Analog Switch Array. Features. Description. Applications
MT882 8 x 2 Analog Switch Array Features Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5V to 4.5V 4Vpp analog signal capability R ON 65 max. @ V DD
More informationDATASHEET EL1883. Features. Applications. Ordering Information. Demo Board. Pinout. Sync Separator with Horizontal Output. FN7010 Rev 2.
DATASHEET EL883 Sync Separator with Horizontal Output FN7 Rev 2. The EL883 video sync separator is manufactured using Elantec s high performance analog CMOS process. This device extracts sync timing information
More informationMT8814AP. ISO-CMOS 8 x 12 Analog Switch Array. Features. -40 to 85 C. Description. Applications
MT884 8 x 2 Analog Switch Array Features Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5 to 3.2 2pp analog signal capability R ON 65Ω max. @ DD =2,
More informationIs Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
More informationSURFACE MOUNT LED LAMP FULL COLOR 1210
PACKAGE DIMENSIONS 2 1 Top View.6 (1.5) G B R.17 (2.7) 3 4.127 (3.2) COMMON ANODE Side View RESIN.198 (.5).43 (1.1) Bottom View PCB.473 (1.2) ANODE SIDE.276 (.7) Pin 4 Die 1 Pin 1 (Red) Die 2 Pin 2 (Green)
More informationSitronix ST CH Segment Driver for Dot Matrix LCD. !"Dot matrix LCD driver with two 40 channel
ST Sitronix ST7063 80CH Segment Driver for Dot Matrix LCD Functions Features!"Dot matrix LCD driver with two 40 channel outputs!"bias voltage (V1 ~ V4)!"input/output signals #"Input : Serial display data
More informationUNISONIC TECHNOLOGIES CO., LTD TL431L
UNISONIC TECHNOLOGIES CO., LTD TL431L PROGRAMMABLE PRECISION REFERENCE DESCRIPTION The UTC TL431L is a three-terminal adjustable regulator with a guaranteed thermal stability over applicable temperature
More informationTHYRISTORS 2P4M,2P6M DATA SHEET. 2 A (4 Ar.m.s.) THYRISTOR DESCRIPTION. PACKAGE DRAWING (Unit: mm) FEATURES APPLICATIONS <R> <R>
DATA SHEET THYRISTORS 2P4M,2P6M 2 A (4 Ar.m.s.) THYRISTOR DESCRIPTION The 2P4M and 2P6M are a P gate all diffused mold type Thyristor granted 2 A On-state Average Current (TC = 77 C), with rated voltages
More informationComplete 10-Bit and 12-Bit, 25 MHz CCD Signal Processors AD9943/AD9944
Complete 10-Bit and 12-Bit, 25 MHz CCD Signal Processors AD9943/AD9944 FEATURES 25 MSPS correlated double sampler (CDS) 6 db to 40 db 10-bit variable gain amplifier (VGA) Low noise optical black clamp
More information6GHz Medium Power SPDT Switch
6GHz Medium Power SPDT Switch RF SWITCH CG2185X2 DESCRIPTION The CG2185X2 is a phemt GaAs FET SPDT (Single Pole Double Throw) Switch. This device can operate from 2.0GHz to 6.0GHz, with low insertion loss
More informationTOSHIBA Photo-IC Silicon Epitaxial Planar TPS853
TOSHIBA Photo-IC Silicon Epitaxial Planar Mobile Phones, PHS Notebook PCs, PDAs Video cameras, Digital Still Cameras Other Equipment Requiring Luminosity Adjustment The is an ultra-compact surface-mount
More information0.5 to 6.0 GHz SPDT SWITCH
DESCRIPTION 0.5 to 6.0 GHz SPDT SWITCH GaAs INTEGRATED CIRCUIT The is a GaAs MMIC SPDT (Single Pole Double Throw) switch for 0.5 to 6.0 GHz applications, including dual-band wireless LAN. This device operates
More informationIs Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
More informationRB751S40T5G. Schottky Barrier Diode 40 V SCHOTTKY BARRIER DIODE
RB75S40 Schottky Barrier Diode These Schottky barrier diodes are designed for high speed switching applications, circuit protection, and voltage clamping. Extremely low forward voltage reduces conduction
More informationComplete 14-Bit, 56 MSPS Imaging Signal Processor AD9941
Complete 14-Bit, 56 MSPS Imaging Signal Processor AD9941 FEATURES Differential sensor input with 1 V p-p input range 0 db/6 db variable gain amplifier (VGA) Low noise optical black clamp circuit 14-bit,
More informationBAS70 series; 1PS7xSB70 series
BAS70 series; PS7xSB70 series Rev. 08 4 May 006 Product data sheet. Product profile. General description in small Surface-Mounted Device (SMD) plastic packages. Table. Product overview Type number Package
More informationSURFACE MOUNT LED LAMP STANDARD BRIGHT 1210
PACKAGE DIMENSIONS 0.127 (3.2) 1 2 3 0.107 (2.7) 4 TOP 0.080 (2.0) CATHODE MARK 0.043 (1.1) 0.024 (0.6) SIDE Ø0.019 (0.5) 4X 0.083 (2.1) 0.054 (1.4) 0.020 (0.5) 0.087 (2.2) BOTTOM 1 2 3 4 GREEN / YELLOW
More informationLM8562. Digital Alarm Clock. Package Dimensions. Overview. Features. Specifications
Ordering number: EN 2658A PMOS LSI LM8562 Digital Alarm Clock Overview The LM8562 is a digital clock-use LSI having features such as easy setting, two alarms. Since the LM8562 is designed to be able to
More informationWAH WANG HOLDINGS (HONG KONG) CO., LTD.
Wah Wang Data Sheet For 5mm Super Flux White LED High Reliable Type High Power 3 LED Chips Series RF-M05V53WUR4-B4-Q Address : Unit C, D & E, 12/F., Po Shau Centre, No. 115 How Ming Street Kwun Tong, Kowloon,
More informationQSB34GR / QSB34ZR / QSB34CGR / QSB34CZR Surface-Mount Silicon Pin Photodiode
QSB34GR / QSB34ZR / QSB34CGR / QSB34CZR Surface-Mount Silicon Pin Photodiode Features Daylight Filter (QSB34GR and QSB34ZR Only) Surface-Mount Packages: QSB34GR / QSB34CGR for Over-Mount Board QSB34ZR
More informationML6428. S-Video Filter and 75Ω Line Drivers with Summed Composite Output. Features. General Description. Block Diagram Σ BUFFER.
www.fairchildsemi.com ML S-Video Filter and Line Drivers with Summed Composite Output Features.MHz Y and C filters, with CV out for NTSC or PAL cable line driver for Y, C, CV, and TV modulator db stopband
More informationSURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
More informationRST RST WATCHDOG TIMER N.C.
19-3899; Rev 1; 11/05 Microprocessor Monitor General Description The microprocessor (µp) supervisory circuit provides µp housekeeping and power-supply supervision functions while consuming only 1/10th
More informationSN54273, SN54LS273, SN74273, SN74LS273 OCTAL D-TYPE FLIP-FLOP WITH CLEAR
OCTAL D-TYPE FLIP-FLOP WITH CLEA SDLS090 OCTOBE 9 EVISED MACH 9 Contains Eight Flip-Flops With Single-ail Outputs Buffered Clock and Direct Clear Inputs Individual Data Input to Each Flip-Flop Applications
More informationVideo signal switcher
ideo signal switcher The BA7606 and BA7606F are switching Is developed for use in video cameras. Each contains three two-channelanalog multiplexers. They feature a large dynamic range, and wide operating
More informationSURFACE MOUNT LED LAMP 0603 (0.8 mm Height)
PACKAGE DIMENSIONS 0.071 (1.8) 0.055 (1.4) 0.035 (0.9) 0.028 (0.7) TOP 0.047 (1.2) 0.031 (0.8) 0.012 (0.3) SIDE 0.039 (1.0) CATHODE MARK BOTTOM + - POLARITY NOTE: Dimensions for all drawings are in inches
More informationHCC4054B/55B/56B HCF4054B/55B/56B
HCC454B/55B/56B HCF454B/55B/56B LIQUID-CRYSTAL DISPLAY DRIERS 454B 4-SEGMENT DISPLAY DRIER - STROBED LATCH FUNCTION 455B BCD TO 7-SEGMENT DECODER/DRIER, WITH DIS- PLAY-FREQUENCY OUTPUT 456B BCD TO 7-SEGMENT
More informationIs Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
More informationProduct Specification PE613010
Product Description The is an SPST tuning control switch based on Peregrine s UltraCMOS technology. This highly versatile switch supports a wide variety of tuning circuit topologies with emphasis on impedance
More informationLASER DIODE NX8346TS nm AlGaInAs MQW-DFB LASER DIODE FOR 10 Gb/s APPLICATION DESCRIPTION APPLICATIONS FEATURES
LASER DIODE NX8346TS 1 310 nm AlGaInAs MQW-DFB LASER DIODE FOR 10 Gb/s APPLICATION DESCRIPTION The NX8346TS is a 1 310 nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) laser diode
More informationDescription. Kingbright
12 SEGMENT BAR GRAPH ARRAY Part Number: DD-12SYKWB Super Bright Yellow Features Suitable for level indicators. Low current operation. Wide viewing angle. Mechanically rugged. Different colors in one unit
More informationIndoor Linear 80W Driver SI-C215280N2KR
Product Data Sheet Rev.00 2017. 2. 9 1# LED Driver Indoor Linear 80W Driver SI-C215280N2KR Constant Current LED Driver Features & Benefits Output Current Range: 1550mA Output Voltage Range: MAX 51 Vdc
More informationTEA6425 VIDEO CELLULAR MATRIX
IDEO CELLULAR MATRIX 6 ideo Inputs - 8 ideo Outputs Internal Selectable YC Adders MHz Bandwidth @ -db Selectable 0./6.dB Gain FOR EACH Output High Impedance Switch for each Output (- state operation) Programmable
More informationLITE-ON TECHNOLOGY CORPORATION
Features * Lead (Pb) free product RoHS compliant. * Low power consumption. * High efficiency. * Versatile mounting on p.c. board or panel. * I.C. compatible/low current requirement. * Popular T-1 diameter.
More information