Philips InstantFit LED PL-C/T Lamp

Transcription

1 Philips InstantFit LED PL-C/T Lamp

2 The Philips InstantFit LED PL-C/T lamp is a technology breakthrough out of our LED lamps portfolio. This product is compatible with programmed start ballasts and is the easiest way to replace fluorescent PL-C/T with LED solutions. The InstantFit lamp is a true plug-and-play LED solution that realizes an energy savings of up to 6%.

3 Product Features Compatibility Innovative driver design that enables a plug-and-play LED solution to replace existing fluorescent lamps Quick and easy installation Reliability Reliable operation between -2 o C and 45 o C ambient temperature Tested to F5L7 requirements, rated life time is 4, hrs. This is defined as the number of hours when 5% of a large group of identical lamps drops below 7% of its initial lumens 5, switching cycles Energy Savings Energy savings of up to 6%* Safety Over voltage and over temperature protection. Complies with UL and CSA safety requirements. Shatterproof polycarbonate (PC) material. Environment No Mercury. Low Carbon Footprint. User Comfort CRI 82 Advanced optical design ensures a uniform light output and superior optical efficiency * Based on comparison between 2-lamp 8.5W InstantFit LED PL-C/T (system power = 21W) vs. 2-lamp 26W PL-C System (system power =52W), both lighting systems including lamps and reference programmed start ballasts 3

4 Spectral Power Distribution 27K 3K 35K 4K Photometric Diagrams 1 x Philips LED InstantFit PL-C/T Lamp 8.5W 27K/3K/35K 1 x 9 lm 1 x Philips LED InstantFit PL-C/T Lamp 8.5W 4K 1 x 95 lm 4

5 1 x Philips LED InstantFit PL-C/T Lamp 1.5W 27K/3K/35K 1 x 12 lm 1 x Philips LED InstantFit PL-C/T Lamp 1.5W 4K 1 x 13 lm Temperature Operating temperature T operating min -2 C max +45 C Storage temperature T case min -4 C max +65 C Maximum surface temperature for rated lifetime of tube at Tamb.=25 C T case +67 C (Horizontal) +77 C (Vertical) 1% Horizontal Dimension: mm % 98% TC Point White Side Lumen (% ) 97% 96% 95% 94% 93% 92% Diffusion Side T c ( o C) TC Point 5

6 Vertical Dimension: mm 1% 99% TC Point in the center TC Point 98% Lumen (% ) 97% 96% 95% 94% 93% 92% T c ( o C) Approbation & Certificates The product complies with UL, NSF, RoHS, CSA. A1 A2 A3 B1 C1 Dimensions (mm) Product A1 A2 A3 B1 C1 8.5PL-C/T LED/26H-27 IF 4P 1/ PL-C/T LED/26H-3 IF 4P 1/ PL-C/T LED/26H-35 IF 4P 1/ PL-C/T LED/26H-4 IF 4P 1/ A1 C1 B3 B2 B1 Dimensions (mm) Product A1 B1 B2 B3 C1 1.5PL-C/T LED/26V-27 IF 4P 1/ PL-C/T LED/26V-3 IF 4P 1/ PL-C/T LED/26V-35 IF 4P 1/ PL-C/T LED/26V-4 IF 4P 1/

7 Technical specification Product Model Product Description Bare Lamp Average Volts Inital Base CRI * Color Rated ** Beam Number Wattage System Lumens Temp. Average Angle Wattage Life (W) (W) (V) (Lm) (K) (Hrs) ( o ) PL-C/T LED/26H-27 IF 4P 1/ G24q/GX24q PL-C/T LED/26H-3 IF 4P 1/ G24q/GX24q PL-C/T LED/26H-35 IF 4P 1/ G24q/GX24q PL-C/T LED/26H-4 IF 4P 1/ G24q/GX24q PL-C/T LED/26V-27 IF 4P 1/ G24q/GX24q PL-C/T LED/26V-3 IF 4P 1/ G24q/GX24q PL-C/T LED/26V-35 IF 4P 1/ G24q/GX24q PL-C/T LED/26V-4 IF 4P 1/ G24q/GX24q * Minimum CRI is 8. ** Tested to F5L7 requirements. Installation Guide 1 2a - Horizontal 3 - Ballast Check 4a - Horizontal 5 - Horizontal 6 2b - Vertical 4b - Vertical Please refer to for the latest ballast compatibility guide. 1. Switch off power to the luminaire. Remove diffuser (if provided). 2. Remove the existing compact fluorescent lamps from the luminaire. 3. Verify that the ballast installed in the luminaire is listed in the Philips compatibility guide ( - Note: If the ballast is not on the compatibility guide, the ballast must be replaced with one that is listed on the compatibility guide. Please refer to the wiring diagram below. 4. Install the Philips InstantFit LED lamps into the existing lamp holders and ensure that they are properly seated in the lamp holder. 5. For Horizontal configuration only - Adjust the angle of the base of the lamp to direct the light towards the application. Please refer to the diagram below for rotational limits. 6. Replace diffuser (if in step 1). Switch on power to the luminaire removed. Wiring Diagram WIRING: (2) LAMPS (1) LAMP BLACK BLUE BLUE LINE WHITE BALLAST YELLOW GREEN RED RED unded 7

8 Application Notes Product is not dimmable. Suitable for dry & damp locations. Operating fixture ambient is -2 C and +45 C. Always switch off power to the luminaire before commencing work. OEM Guideline Horizontal Failure rate vs. Ta 25 O C Cumulate Failure Rate 1% 9% 8% 7% 6% 5% 4% 3% 2% 1% Lumen Maintenance vs. Lifetime Failure Rate vs. Lifetime vs. Tcase Total Failure Rate 8% 7% 6% 5% 4% 3% 2% 1% Lifetime vs. Tcase TC=87 O C TC=77 O C TC=67 O C Lumen Maintenance 1% 95% 9% 85% 8% 75% Lifetime F1L7 F5L7 7% TC ( o C) Vertical Failure rate vs. Ta 25 O C Cumulate Failure Rate 1% 9% 8% 7% 6% 5% 4% 3% 2% 1% Failure Rate vs. Lifetime vs. Tcase Total Failure Rate 8% 7% 6% 5% 4% 3% 2% 1% TC=97 O C TC=87 O C TC=77 O C 8

9 Lumen Maintenance vs. Lifetime Lifetime vs. Tcase Lumen Maintenance 1% 95% 9% 85% 8% 75% Lifetime F1L7 F5L7 7% TC ( o C) 215 Philips Lighting All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. 7/215