CONNECTORS. Simple steps to guide you in using this catalogue. Applications. Options. Ordering Codes BNC 75Ω RF CONNECTORS

Transcription

1 NC 75Ω RF CONNCTORS NC 75Ω RF CONNCTORS Within the internationally standardised NC mating face dimensions, a perfect 75 ohm characteristic impedance cannot be realised. However, at frequencies up to 1000 MHz, the small impedance deviation is negligible for practical applications. Our true 75 ohm connectors with a typical VSWR reading of 1.06:1 at 2000 MHz are identified by an asterisk following the part number. pplications roadcast High bandwidth video equipment D1/D2 serial digital Graphic work stations Telephony / Workstations Options Crimp Plugs Jack to Jack adapters Patch Panels D Shell Jacks Plug to Plug U-Link connectors Crimp Tools Simple steps to guide you in using this catalogue 1) Identify the product group listed in Contents on Page 1 and go directly to that page number. 2) ach product group cover page then details information and options available. 3) Refer to the product detail pages and identify the product you require pictorially. 4) Read the product description column for the products standard features. 5) Use variations column to determine your choice. 6) Identify part number. 7) In the event the particular option you require is not listed please refer to the part number breakdown page at the end of each section. 8) Please contact us directly if you have any further problems. Ordering Codes We have listed the more common ordering codes in each section. mphenol offer an extensive range of RF connectors for most applications. Please visit for further information. Please contact us if you need any further assistance. NTRTINMNT INTRCONNCT CTLOGU - mphenol ustralia Pty Ltd Telephone Fax

2 NC 75Ω CONNCTORS mphenol manufacture a large range of connectors to suit cables other than those listed below, for example elden YR23769 and 46899, please contact us to discuss your specific requirements. The complete mphenol Connex catalogue featuring a wide range of RF connector products is available on request. Item code CT-CONNX-01. T1 connectors 0-4GHz are available on request. PRODUCT - FIGUR DRWING Dimensions in mm (inches) CL TYP RG-/U INSULTION CRIMP PRT NUMR Straight Crimp Plug - Captive Contact- Standard Cable 59/ 62/ 140/ 210 TOOL * 59/ U-20WG * 11 D / U-14WG/ 8213/ 9292/ 7731/ 1859 D / 143/ / H * 6 PLNUM/ * 8281/ 9231/ * * ssembly Instruction - page * Straight Crimp Plug Captive Contact- Miniature Cable (Remark: With sleeve / Hex crimp size.178 ) 179/ 187/ / U DOUL RIDD / 195/ 122/ 8218/ 1865/ * ssembly Instruction - page 65 59/ U PLNUM-20WG * 62 Note: *Centre contact.053" diameter, 30u" u. True 75 ohm. Use.044 hex or 12 indent crimp part NTRTINMNT INTRCONNCT CTLOGU - mphenol ustralia Pty Ltd Telephone Fax

3 NC 75Ω CONNCTORS PRODUCT - FIGUR DRWING DSCRIPTION & Dimensions in mm (inches) PRT NUMR CL TYP RG-/U INSULTION CRIMP TOOL ulkhead dapter -Isolated Jack to Jack - Straight ayonet Lock to ayonet Lock ulkhead dapter -Isolated Jack to Jack - Straight Push on to ayonet Lock ulkhead dapter -Isolated, Jack to Jack,ayonet Lock to ayonet Lock, Nickel Finish ulkhead dapter -Isolated, Jack to Jack,ayonet Lock to ayonet Lock, lack Finish ulkhead dapter -Isolated, Jack to Jack, Push on to ayonet Lock, Nickel Finish ulkhead dapter -Isolated, Jack to Jack,Push on to ayonet Lock, lack Finish C - NC - JJ - 75 C - NC - JJ - 75 C - NC - PJ - 75 C - NC - PJ - 75 U - Link Centre to Centre mm NC - U-LINK 75*1 Note: Custom Sizes available please contact factory. NC 75Ω RF CCSSORIS ND TOOLING PRODUCT - FIGUR DSCRIPTION DI CVITIS CL TYP RG-/U CONNCTOR PRT NUMR GUID Crimp tool with Die Set.255 /.213 / / /.128 / /.100 / /.255/.068/ / 187 / 180 / D / 59 / /.320 /.255 RG59 H /.178 / /.178/.068/ /.255/.068/ / 179 / 187 K / 62 / 179 / 187 M / 1694 N Way indent crimp tool This 12 point, full rachet crimp tool terminates precision NC,.053 diameter, 75Ω centre contacts, as specified in this catalogue. Tool is designed fortelco/roadcast applications and is built to M22520 specifications. True 75 ohm NTRTINMNT INTRCONNCT CTLOGU - mphenol ustralia Pty Ltd Telephone Fax

4 NC 75Ω RF CONNCTORS NC PTCH PNLS Features: mphenol 75Ω connectors ayonet lock or Push-on types Supplied with adhesive strip ID labels Options: 1RU, 20 NC connectors or 2RU, 40 NC connectors luminium in Clear or lack anodised Steel in lack powder coat Customised versions available on request PRODUCT - FIGUR DRWING Dimensions in mm (inches) DSCRIPTION MTRIL / FINISH LODD WITH (refer to page 63 for specifications) PRT NUMR 1RU 1X20 Patch Panel, Supplied with 1 ID label mpty Panel C-NC20M C-NC20MJ75 C-NC20MP75 mpty Panel C-NC20 C-NC20J75 C-NC20P75 luminium / lack mpty Panel C-NC20 luminium / lack C-NC20J75 luminium / lack C-NC20P75 2RU 2X20 Patch Panel, Supplied with 2 ID labels mpty Panel C-NC40M C-NC40MJ75 C-NC40MP75 mpty Panel C-NC40 C-NC40J75 C-NC40P75 luminium / lack mpty Panel C-NC40 luminium / lack C-NC40J75 luminium / lack C-NC40P75 Panel ID label Plastic Not pplicable C-NC-LL 64 NTRTINMNT INTRCONNCT CTLOGU - mphenol ustralia Pty Ltd Telephone Fax

5 NC 75Ω CONNCTORS NC 75Ω RF SSMLY INSTRUCTIONS SSMLY SSMLY STP 1 STP 1 STP 2 STP 2 STP 3 STP 3 STP 4 STP 4 STP 5 STP 5 STP 1. ll parts of the connector are shown. crimp tool is necessary to complete the connection. STP 1. ll parts of the connector are shown. crimp tool is necessary to complete the connection. STP 2. Strip the cable inner conductor, dielectric, braid, and jacket as per RCOMMNDD CL STRIPPING DIM S in catalogue. STP 2. Strip the inner conductor, dielectric, and jacket as per RCOMMNDD CL STRIPPING DIM S in catalogue. STP 3. Insert inner conductor into the CONTCT PIN, crimp it with the crimp tool as shown. Then slide the FRRUL onto cable. STP 3. Slide the FRRUL on to cable, then fold back braid wire and slide the INSULTOR on to dielectric as shown. STP 4. Insert the MIN ODY into braid and dielectric. STP 5. Slide the FRRUL over braid, crimp it with the crimp tool as shown. STP 4. Insert inner conductor into the CONTCT PIN, crimp it with crimp tool as shown. STP 5. Push cable and parts into the MIN ODY until it stops. Then slide the FRRUL over braid wire and against the MIN ODY, crimp it with the crimp tool as shown. 65 NTRTINMNT INTRCONNCT CTLOGU - mphenol ustralia Pty Ltd Telephone Fax

6 NC 75Ω RF CONNCTORS STNDRD DT STNDRD DT NC 75Ω RF CONNCTORS VLU GNRL CHRCTRISTICS LCTRICL CHRCTRISTICS Mating Cable ttachment Impedance Frequency Range Voltage Rating Dielectric withstanding voltage VSWR Contact Resistance Centre Contact Outer Contact Insulation Resisance ayonet Lock Crimp - Crimp 75Ω 0-1 GHz 500V RMS 1500 Volts RMS f(GHz) DC to 1 GHz 1.5 milliohm 1.0 milliohm 5000 MΩ (min.) MTRILS Part Material Finish ody, Coupling sleeves rass Nickel Crimp Ferrule nnealed Copper Nickel Male Contact rass Gold Female Contact eryllium Copper or Phosphor ronze Gold XLR Housing Insulators Diecast Zinc lloy or Satin Nickel or lack Polyester Natural Rev 1-08/2003 NOT: These characteristics are typical and may not apply to all connectors. PNL CUTOUTS - FRONT VIW C-NC-PJ-75 C-NC-JJ NTRTINMNT INTRCONNCT CTLOGU - mphenol ustralia Pty Ltd Telephone Fax