Tools Amphenol CTL Crimp Series

Transcription

1 CTL Crimp Series Bench Mounted Pneumatic Crimp Machine This pneumatic-powered crimp tool makes production termination for coaxial cable easy, efficient and precise. Our compact (less than 20 pounds) unit is hand-actuated. The dual-position feet allow horizontal or vertical loading for maximum efficiency. The manually-activated mode is adaptable to either right- or left-hand operation. The connector/cable loading mechanism is spring loaded to help keep hands away from the work area during the crimp cycle. The die holder is compatible with industry standard die sets from Connex, Ideal Industries, Paladin and Sargent. The adjustable crimp height allows for termination of coaxial cable, as well as discrete wire terminations, with appropriate dies for custom crimp applications. PCTL-S1000 Crimp Tools Amphenol crimp tools are sold complete as a tool handle with the die set included. Purchase of some or all of the seven tools shown below will allow the user to terminate most popular RG coaxial cables. To order the crimp tool required for a specific application, please refer to the Connector Assembly Instruction for the Amphenol part number. The recommended tool number is listed under the column labeled Tool Number. MIL-T Die Sets Cross Reference 227-No. Die Sets /5-11, , -13 / & -32 / & -57 _ /5-11, -13, , -13, -57 & & , /5-09, , -13, , / , -32, , CTL-1 CTL-2 CTL-3 CTL-4 CTL-5 CTL-6 CTL-8 Hex Sizes Cable RG-/U Notes CTL-1 PCTL (1.7) (5.4) (6.5) RG-59, 62, 140, 210 Belden 9258, 9259, 9907, for BNC, & TNC 160

2 Hex Sizes Cable RG-/U Notes CTL-2 PCTL-200 CTL-3 PCTL (4.5) (8.2) (1.7) (2.5) (10.9) (5.4) RG-6 RG-174, 188, 316 RG-179, 187 Plenum 58 Belden 8281 RG-8, 11, 149, 213, 214, 225, 393 Ethernet Cables for BNC & TNC for Type N Tools CTL-4 PCTL (10.9) (1.9) (1.9) Belden , IBM Twinax Cable for Center Contacts of Twinax Plugs and RFX1 CTL-5 PCTL (1.3) (2.5) (6.5) (1.7) (5.4) RG-59, 62, 140, 210 Belden 9258, 9259, 9907, for BNC, TNC, Mini-UHF, and Type N CTL-6 PCTL (6.5) (1.7) (4.5) (1.3) RG-174 RG-59, 62 for 50Ω and 75Ω BNC & TNC CTL-8 PCTL (1.3) (6.5) (1.7) (8.2) RG-59, 62 RG-6 for 50Ω and 75Ω BNC & TNC CTL (3.3) RG-174, 188, 360, 180 for SMA Crimp PCTL (1.7).178 (4.5) CTL-11 PCTL (2.9).429 (10.9) Belden 9913, 9914, LMR 400 for Type N 161

3 TWINHEX Crimp Tool System Hand Crimp Tool The Amphenol TWINHEX crimp tool system is used in Industrial/ Military Standard applications. It consists of a tool frame and a selection of die sets for use in assembling Amphenol RF Pneumatic Crimp Tool The Amphenol pneumatic crimp tool is designed for use in high volume RF connector/cable assembly applications. Bench mountable on a swivel base, this high speed crimp tool runs on a standard 85/100 psi airline and is actuated by a foot switch for hands-free operation. Die Sets for Crimp Tool & Pneumatic Crimp Tool Amphenol Military Hex Size Inches (mm) Die Set Die Set Cavity A Cavity B Number Number (Outer) (Inner) (6.5).049(1.2) (4.5).049(1.2) (8.2).052(1.3) (4.5).052(1.3) M22520/ (3.2).105(2.7) M22520/ (4.5).068(1.7) M22520/ (5.4).068(1.7) M22520/ (6.5).068(1.7) M22520/ (6.7).068(1.7) M22520/ (9.8) (10.9).100(2.5) M22520/ (8.2).100(2.5) (8.2).068(1.7) M22520/ (8.0).151(3.8) M22520/ (5.4).100(2.5) M22520/ (6.5).100(2.5) (3.84)..068(1.73) (5.4).052(1.3)sq (10.9) B/C=.075(1.9) (4.1).049(1.2) Order Information TWINHEX tool frame (M22520/5-01) and pneumatic crimp tool are sold without dies. To order the die set required for your application, please refer to the Connector Assembly Instruction for the connector part number. The recommended die set number is listed in the column headed Die Set for Tool (& for ). Military Amphenol Number Number Description Hand Tool Frame for use with Twinhex XX M22520/5-01 and X Die Sets (Die Sets sold separately) Pneumatic Crimp Tool with Swivel Base, Foot Switch and Hose (Connects tool to foot switch) (Die Sets for are same as those used in Hand Tool Frame and are sold separately) 162

4 TRIHEX & ECONOHEX Crimp System TRIHEX Crimp Tool The Amphenol TRIHEX crimp tool provides an economical approach to terminating crimp This compact, easy-to-use, three-cavity hand tool incorporates the same crimping ability as most popular two-die crimp tools. But quality is not sacrificed for economy: Full cycle, reinforced ratchet control provides the high repeatability and reliability benefit of crimp terminated Heavy duty steel construction stands up to in-the-field use. Two models are available, providing maximum flexibility for use in a wide variety of applications. Tools TRIHEX order information Amphenol Die Set Number Cable RG-/U Cavity A Cavity B Cavity C , 58, 59, 62, 140, 141, 142, 210,.213(5.4).255(6.5).068(1.7) , 62, Belden (8.1).255(6.5).068(1.7) ECONOHEX Crimp Tool and Dies The Amphenol ECONOHEX hand crimp tool is similar in features and application to the TRIHEX crimp tools. However, the ECONO- HEX provides the additional feature of die set insertion and removal such that the purchase of the ECONOHEX tool handle and some or all of the four die sets will allow the user to terminate most popular RG coaxial cables as well as Twinaxial cable for IBM system 3X networks. ECONOHEX order information Amphenol Die Set Cable RG-/U Connector Series Cavity A Cavity B Number by Cavity Used (outer) (inner) , 9, 11, 87A, 149, 165, 213, 214, 216, 225, 393 BNC, N.429(10.9).100(2.5) 55, 58, 141, 142, 142B, BNC, RP-BNC, RP-TNC, RP-SMA Cav. B =.213(5.4) , 62, 140, 210, 302, Belden 9258, Cav. C =.068(1.7} Amph BNC Cav. A =.255(6.5) , 180, 195, 316, Amphenol BNC.178(4.5).068(1.7) Belden 8227, 9207; B/C only center contacts IBM Twinax Cable of Twinax Plug.429(10.9) B/C =.075(1.9) ECONOHEX Tool Handle without dies 163

5 MMCX CTL Crimp Tool Amphenol crimp tools are sold complete as a tool handle with the die set included. Purchase of some or all of the seven tools shown below will allow the user to terminate most popular RG coaxial cables. To order the crimp tool required for a specific application, please refer to the Connector Assembly Instruction for the Amphenol part number. The recommended tool number is listed under the column labeled Tool Number. CTL Crimp Tool order information Crimp Tool Connector Series Part Number Cable RG-/U by Cavity Used Cavity 1 Cavity 2 Cavity 3 CTL-13 PCTL-1300 for Bench RG-174, 178, 188, 196, 316, RD-316 MicroMate, SMB, SMA.105 (2.67).128 (3.25).151 (3.84) CAP Installation and Connector Removal Tool REF (69.22) Universal tool for MicroMate (MMCX) right angle connectors for protective cap mounting and decoupling of.281 HEX (7.14).281 SQ (7.14).119 REF (3.02) Tool # Hex Sizes Cable RG-/U Notes CTL (6.5) (8.2) (8.3).042 (1.1) Belden 8281, 1694A AT&T 734A for 3-Piece BNC Crimp CTL (4.6) (4.8) (1.1) AT&T 735A AT&T 734A Belden 8218 for 3-Piece BNC Crimp 164