GP-500 SERIES - Low Voltage
|
|
- Baldwin O’Neal’
- 6 years ago
- Views:
Transcription
1
2 M O T O R & G E N E R A T O R P R O T E C T I O N AUTOMATIC INSULATION RESISTANCE TESTERS Meg-Alert is an automatic, in-line insulation resistance tester and monitor with test capabilities from 500 to 5000 VDC. The permanently installed system will continuously test the dielectric strength of winding insulation while the motor or generator is off line. The Meg-Alert uses a current-limited DC test output to safely detect insulation breakdown and can alarm and/or lockout equipment from starting. This type of predictive maintenance protection can help eliminate unscheduled downtime and reduce repair cost(s). In addition, the automatic no-hands-on testing increases maintenance staff efficiency and maximizes worker safety while avoiding arc flash exposure. A color-coded analog meter output is standard with optional 4 to 20 ma signals available. GP-500 SERIES - Low Voltage GP500 FEATURES - Model GP500-M Single Motor Model 2% Panel meter, 500 VDC scale DIN Rail mounting bracket 120/240 VAC, 50/60 HZ.05 A 120 VAC 600 V RMS N/C Contact 0-10 Seconds FEATURES - Model GP500-MU/1000-MU Single Motor Model Latching alarm contacts with manual reset Compact, lightweight enclosure DIN Rail mounting bracket MEG-OHM Meter (1% ) (2% Opt.) Remote LED display assembly (opt.) FEATURES - Model GP500 Single Motor Go/No Go model Latching alarm contacts with manual reset & remote display assembly Compact, lightweight enclosure DIN Rail mounting bracket OPTIONS Install 1, 2 or 3 units in a compact wall mount enclosure Remote LED display assembly Selector switch for common panel meter application Alarm/Lockout Contact: GP500-M Test on: Green Alarm: Red flashing 2% Analog Signal 2% Overall 120/240 VAC, 50/60 HZ.05 A 120 VAC 500/ µa 1000 V RMS N/C Contact 0-10 Seconds Alarm/Lockout Contacts: 2 Form C, 240 V or 28 VDC Pre-Alarm Contact: 1 Form C, 240 V or 28 VDC Test on: Green 120/240 VAC, 50/60 HZ.05 A 120 VAC µa 600 V RMS N/C Contact 0-10 seconds Alarm Contact: 1 Form C, 240 VAC or 28 VDC Lockout Contact: 1 N/C, 240 VAC or 28 VDC Test on: green Alarm: red flashing 2% Overall 2.75 H x 2.25 W x 4.5 D 1 lb H x 2.25 W x 4.5 D 1 lbs. GP500-MU Pre-Alarm: Yellow flashing Alarm: Red flashing 2% Overall Ambient Temperature: -14 F to 140 F 2.75 H x 6 W x 4.5 D 1.5 lbs.
3 GP500-M-DC FEATURES - Model GP500/1000-M-DC DC Input Model (single motor) 500/1000 VDC test voltage Remote LED display assembly (opt.) 1% MEG-OHM Meter 24 VDC VDC 500/ µa max V RMS 120 VAC, 50/60 HZ or 24 VDC 0-10 Seconds Alarm/Lockout Contacts: 2 Form C, 240 V or 28 VDC System Active:Yellow flashing Alarm: Red flashing 4 H x 12 W x 8 D FEATURES - Model GP500-4M-9M Multiple Motor Model (9 motors max.) (AC/DC) Adjustable Auto/Manual scanning with digital display (optional) Individual latching alarm contacts with manual reset Individual removable test point terminal blocks w/ 10 ft. cable 1% MEG-OHM Meter Scan Time: Alarm Contact: Lockout Contact: Ambient Temperature: 120/240 VDC 50/60 Hz or 24 VDC VAC VDC 600 V RMS N/C Contact 0-15 Seconds 0-60 Seconds 1 Form C, 240 VAC or 28 VDC (per test point) 1 N/C, VAC or 28 VDC (per test point) -20 F to 140 F 4 H x 11 W x 8 D Power Supply 7 H x 7 W x 1 D Switching Unit 6 lbs. GP2500, 5000 SERIES - Medium Voltage GP500-9M (Installed in NEMA 4X Enclosure) GP2500/5000-MU FEATURES - Model GP2500/5000-MU/HV Single Motor Model Fused input and H.V. test lead 15 ft. two-way current-limited H.V. test lead w/plug 2500 VDC/5000 VDC test voltage Long-life, flashing remote LED/ switch assembly w/ 15 ft. cable 1% MEG-OHM Meter w/set point indicator GP M Alarm/Lockout Contact: Pre-Alarm Contact; Ambient Temperature: 120/240 VAC 50/60 Hz VAC 2500/ µa max V RMS (HV 13.8 KV) N/C Contact or 120 VAC, 50/50 Hz 0-2 Minutes Power On: Green, Test On: Yellow Pre-Alarm: Yellow Flashing Alarm: Red Flashing -20 F to 140 F 12 H x 4 W x 8 D HOW TO ORDER Select a model for testing AC or DC motors. Select a model test voltage closest to your motor operating voltage. Motor horsepower is NOT a factor. Select a meter output (1% or 2%) or a go/no go flashing LED output. Select a single alarm output or an additional pre-alarm output. On low voltage motors only select a single motor unit or a multiple motor unit. If multiple, choose model closest to the number of motors to be tested. Select an optional 4-20 ma transducer unit for automatic data trending. Select the input voltage (AC/DC) and control signal available at your motor control panel. Determine if you want the unit mounted in an enclosure. Determine alarm levels required if other than factory standard. MODEL # CODE (Sample) Meg-Alert General Tester Voltage No # = Single Motor Insulation Tester No Letter = Motor Guard Go/No Go Tester Product Family 500 = 500 VDC *4 = Automatic 4 Motor Insulation Tester M = Motor Guard Motor Insulation Tester 1000 = 1000 VDC *6 = Automatic 6 Motor Insulation Tester DC = DC Input Insulation Tester 2500 = 2500 VDC *8 = Automatic 8 Motor Insulation Tester MU = Special Model for Utilities 5000 = 5000 VDC *9 = Automatic 9 Motor Insulation Tester * = Only Available on Low Voltage Motors
4 FEATURES - Model GP500-G Single Generator Model (AC) GP500-G 1% FEATURES - Model GP500/1000-G-DC DC Input model (single generator) 500/1000 VDC test voltage Remote LED display (optional) 1% MEG-OHM Meter with set point indicator GP500-6G FEATURES - Model GP2500/5000-G/HV Single Generator Model Fused input and H.V. test lead 15 ft. Two way current limited HV test lead w/plug 2500 VDC/5000 VDC test voltage Long-life, flashing remote LED/switch assy. w/15 ft. cable GP500 SERIES - Low Voltage Remote LED display (optional) MEG-OHM Meter (1%) (2% Opt.) Compact, lightweight enclosure Din Rail mounting bracket 24 VDC.68 A 24 VDC 500/ µa max V RMS 120 VAC, 50/60 Hz or 24 VDC 0-15 Seconds Alarm/Lockout Contacts: 2 Form C, 240 VAC or 24 VDC 4 H x 12 W x 8 D FEATURES - Model GP500-2G/6G Multiple Generator Model (6 gen max.) (AC/DC) Adjustable auto/manual scanning w/digital display (optional) Individual latching alarm contacts with manual reset Individual removable test point terminal blocks w/10 ft. cable 1% MEG-OHM Meter with set point indicator GP2500, 5000 SERIES - Medium Voltage Alarm/Lockout Contact: Pre-Alarm Contact: Ambient Temperature: 120/240 VAC, 50/60 Hz.15 A 120 VAC 2500/ µa max V RMS (HV 13.8 KV) N/C Contact or 120 VAC, 50/60 Hz 0-2 Minutes Power On: Green Test On: Yellow Pre-Alarm: Yellow Flashing Alarm: Red -20 F to 140 F 12 H x 4 W x 8 D 120/240 VAC 50/60 Hz.05 A 120 VAC 600 V RMS 120 VAC, 50/60 Hz or 24 VDC 0-10 Seconds Alarm/Lockout Contacts: 2 Form C, 240 VAC or 28 VDC Pre-Alarm Contact: 1 Form C, 240 VAC or 24 VDC Test On: Green, Pre-Alarm: Yellow Flashing Alarm: Red Flashing 2.75 H x 6 W x 4.5 D 1.5 lbs. GP500-G-DC 120/240 VAC, 50/60 Hz or 24 VDC.24 A 120 VDC or VDC 600 V RMS 120 VAC, 50/60 Hz or 24 VDC 0-15 Seconds Scan Time: 0-60 Seconds Alarm Contact: 1 Form C, 240 VAC or 24 VDC (per test point) Lockout Contact: 1 N/C, 240 VAC or 28 VDC (per test point) Power Supply 4 H x 11 W x 8 D Switching Unit 7 H x 7 W x 1 D 6 lbs. GP2500/5000-G
5 HOW TO ORDER Select a model for testing AC or DC generators. Select a model test voltage closest to your generator operating voltage. Generator kilowatt is NOT a factor. Determine if the generator has a grounded neutral lead. If so, select a Meg-Alert model with a ground interrupter rating capable of handling neutral current level. One ground interrupter is required per generator. Select a meter output of 1% or 2% accuracy. Select an optional pre-alarm output. On low voltage generators (only) select a single generator unit or a multiple generator unit. If multiple, choose model closest to number of generators to be tested. Select an optional 4-20 ma transducer unit for automatic data trending. Select input voltage (AC/DC) and control voltage available at your generator switchboard. Determine if you want unit mounted in an enclosure. Determine alarm levels required if other than factory standard. MODEL # CODE (Sample) GP G 2 Meg-Alert General Tester Voltage No # = Single Generator Insulation Tester G = Gen Guard Generator Insulation Tester No Number - Ungrounded Product Family 500 = 500 VDC *2 = Automatic 2 Generator Insulation Tester DC = DC Input Insulation Tester 1 = 1000 KW & Below 800A NO Grd. Int = 1000 VDC *4 = Automatic 4 Generator Insulation Tester GU = Special Model for Utilities 2 = 1000 KW & Below 800A NC Grd. Int = 2500 VDC *6 = Automatic 6 Generator Insulation Tester WG - Wind Generator Model 3 = 1000 KW & Above 1200A NO Grd. Int = 5000 VDC * = Only available on Low Voltage Generators 4 = 1000 KW & Above 1200A NC Grd. Int. 5 = Resistive Grounded 30-A NO Grd. Int. 6 = Resistive Grounded 30A NC Grd. Int. GROUND INTERRUPTERS Used with Gen Guard systems on 4 wire grounded neutral generators only. FEATURES - Model GP010/400/600-GIO/GIC-HV For automatic testing of grounded generator Ground safety interface circuits Long-life, silver/cadmium contacts, N.O. or N.C. Neutral/Ground bus bars (400/600 only) Fused contactor input power Isolated standoff terminals (010/HV only) Visual ground closed indicator w/nameplate Visual ground open indicator w/nameplate (opt.) Rugged, shock and vibration resistant construction Five-year warranty. 120 VAC 50/60 Hz.30 A max. Voltage Rating: 600 V RMS, 5KV RMS (H.V. only) Max. Amp. Rating: GP Amp Cont. GP Amp Cont. GP Amp Cont. Max. Fault Rating: GP Amp (4 cycles) GP K Amp (4 cycles) GP K Amp (4 cycles) Auxiliary Contact: 240 VAC or 28 VDC GP H x 9 W x 6 D (GIO, GIC) GP H x 16 W x 8 D (GIO) GP H x 15 W x 8 D (GIO) GP H x 17 W x 12 D (GIC) GP010 9 lbs. GP lbs. GP lbs. GP400-GIO GP400-GIO-AC ACCESSORIES PART NUMBER DESCRIPTION GP7000 1% Switchboard meter, 500 VDC scale GP % Switchboard meter, 1000 VDC scale GP % Switchboard meter, 2500 VDC scale GP % Switchboard meter, 5000 VDC scale GP7002 2% Panel meter, 500 VDC scale GP % Panel meter, 1000 VDC scale GP8010 Remote LEDs (2) and nameplate assembly GP8011 Remote LEDs (3) and nameplate assembly GP8012 Remote LEDs (2), test switch (1), reset switch (1) and nameplate assembly GP8012-U Remote LEDs (4). test switch (1), on/off switch (1), reset switch (1) and nameplate assembly GP7002 GP7000 GP8010 GP8012-U PART NUMBER DESCRIPTION GP Green ground closed light assembly (green lens) GP8005 Red ground open light assembly (red lens) GP8015 Sonalert audible alarm GP8025 Transducer 4-20ma output GP9009 High voltage fuse, 5 KV GP10010 High voltage fuse, 15 KV GP10015 High voltage test lead assembly, 15 KV w/15 foot GP10016 High voltage fuse block assembly, includes fuse GP KV High voltage fuse block assembly, includes fuse GP10025 High voltage test lead assembly, 2500 V w/15 foot GP10050 High voltage test lead assembly, 5000 V w/15 foot GP14000 Side Mount Brackets GP14002 DIN Rail (6 in.)
6 12/2014
02/11/2015
DIN Rail Mount 17.5 mm MUS/MUSF 80 AC/DC Part number 84872141 Control relays monitoring their own power supply - MUS : Over/undervoltage control Selectable latching (memory) function - MUSF : Over/undervoltage
More informationPBC series. RoHS. Ready. IEC-Type Contactors & Accessories 9-80 Amp AC-3, Amp AC-1 AC Coils. P&B PBC Series IEC Type Contactors & Accessories
PBC series IEC-Type Contactors & Accessories 9-80 Amp AC-3, 25-125 Amp AC-1 AC Coils File E38802 (PBC) RoHS Ready Users should thoroughly review the technical data before selecting a product part number.
More informationHigh performance circuit breakers
Series High performance Description The high performance MCB offers a compact solution to circuit protection. The devices are DIN rail mounted. The is available with application-specific trip characteristics
More informationModular Lube Lubrication Systems System Controls
Model 84501 Program Timer Solid State Designed to control the lubrication cycle frequency of air-operated single-stroke pumps. Timer turns pump on/off at programmed intervals via a 3-way or 4-way air solenoid
More informationMagnecraft General Purpose Relays 750R Series DPDT and 3DPT, 10 A
and 3DPT, 10 A UL Listed when used with proper Magnecraft s The 750R series octal base, plug-in relays offer clear or full-feature covers with multiple mounting options and accessories. 750R 750R Full-Feature
More informationBulletin 190 IEC Modular Starter System
Bulletin 90 Table of Contents Selection Guide Description Page Bulletin 90....................................... Accessories....................................... 7 Specifications.....................................
More information263 Series LED Bargraph Indicator and Controllers
263 Series LED Bargraph Process Control Water Treatment High resolution 51 segment LED Bargraph for easy reading Accuracy 1% Red display Vertical or Horizontal mounting & stackable Connection Diagrams
More information3.5. Control Relays and Timers. Contents. 9575H Series 3000 Type AA, AC and DC. General Purpose Relays Type AA
.5 9575H Series 000 Relay Contents 9575H Series 000 Type AA, AC and DC Product Selection....................... Accessories............................ Technical Data and Specifications........... Dimensions............................
More informationPanel cutout required: 1.772" x 3.622" (45mm x 92mm) 1.76" (45mm) 2.45" (62mm) 3.20" (81mm) 3.60" (91mm) 0.59" (15mm) Special Features
NEMA4X, IP65 Front Bezel Meter with Relays Option RELAY2 RELAY1 24V OUT POWER 4 3 2 1 6 5 2 1 2 1 NO NC COM NO NC COM RTD TC P P RTD 3 4 1 2 5 TC 6 SWITCH Rear View Gasket APM765 Panel Meter Description
More informationDescription. Specifications and Ordering Information 1900/27 Vibration Monitor
R Specifications and Ordering Information 1900/27 Vibration Monitor Description The 1900/27 is a single-channel, stand-alone, locally mounted vibration monitor. It can be used as a stand-alone machinery
More informationSeries CT7N Bimetallic Overload Relays
Series CT7N imetallic Overload Relays Choose CT7N overloads in DC applications and when monitoring Variable Frequency Drives Sprecher + Schuh has always paid particular attention to the subject of motor
More informationAF-300 E11 Adjustable Frequency Drive
AF-300 E11 Adjustable Frequency Drive The AF-300 E11 adjustable frequency drive is GE s new generation of micro drives. GE recognized your need for a high-performance, full-featured compact drive and designed
More informationWeekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N
Weekly Timer 1/4 DIN Size Timer Features Prompted Programming and Large LCD Display 24 hours x 7 days programming using just 5 switches 16 program steps and cycle operation Two independent 15 A control
More informationCAMTO LTD. Arc detecting system DC/AC
CAMTO LTD Arc detecting system DC/AC Arc detecting system DC/AC The system is based on experience with arc protection since 1962. The system units are built into boxes that all fit on a 35 mm DIN-rail.
More informationSolid-State Digital Timer
Solid-State Digital Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay,
More informationMCR3 POWER EQUIPMENT. Microprocessor Controlled Constant Current Regulator. Compliance with Standards. Uses. Features
Microprocessor Controlled Constant Current Regulator Compliance with Standards FAA: ICAO: IEC: 61822 CENELEC: AC 150/5345-10 (current edition), L-828, L-829. Aerodrome Design Manual Part 5, para. 3.2 (current
More informationActive UTP Transceiver Hub Installation Guide
Active UTP Transceiver Hub Installation Guide Models Include: HubWayEX16 - Sixteen (16) Channels - Thirty-two (32) Channels Rev. 011810 More than just power. TM Overview: Altronix HubWayEX16/EX32 Active
More informationDatasheet - SRB301LC 24VAC/DC
25.02.2016-18:05:23h Datasheet - SRB301LC 24VAC/DC Guard door monitors and Safety control modules for Emergency Stop applications / General Purpose safety controllers (Series PROTECT SRB) / SRB301LC Preferred
More informationDescription Set value in neutral conductor is synchronous with set value Ir of main pole. R.m.s. value measurement and thermal memory CSA 100
DATASHEET - NZMN3-4-AE400 Circuit-breaker, 4p, 400A Part no. NZMN3-4-AE400 Catalog No. 265891 Similar to illustration EL-Nummer (Norway) 0004358857 Delivery program Product range Circuit-breaker Protective
More informationSCALE & WEIGHT DISPLAYS
The MICRO SERIES SCALE & WEIGHT DISPLAYS LARGE DIGIT MODELS Mighty-5S DPM MODELS Micro-S & Mighty-1S Mighty-1S Micro-S ELECTRO-NUMERICS, INC. Introduction The Electro-Numerics family of Digital Panel Meters
More informationMPCE Monitoring, Machine Test Signal. Guard Mode, Remote Reset. Eact Channel Select and Floating Blanking. Adjustable mounting brackets
MicroSafe MCF4700 C US File No. LR90200 MicroSafe Flexible MCF4700-12, MCF4700-20, MCF4700-30 12 mm, 20 mm and 30 mm resolution versions Compact segmented light curtain 1.02 inch (26 mm) x 1.1 inch (28
More informationAbsolute Rotary Encoder E6CP
Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the
More informationModel Number Structure
Cycle Control Units CSM DS_E_7_1 Refer to Safety Precautions for All Power Controllers. Used in Combination with the to Enable High-precision Temperature Control Use cycle control to achieve power control
More informationSERIES x5. Nickel-plated brass Connection 1) PUR cable type 1 Degree of protection. IP 67 Mounting. Embeddable Max. switching frequency
1 Size SERIES 400 x SERIES x Operating distance mm 0.8 0.8 1. Housing material Connection 1) PUR cable type 1 PUR cable type 1 / Connector S8 PUR cable type 1 Degree of protection Mounting Max. switching
More informationLC2D09E7 REVERSING CONTACTOR 575VAC 9A IEC
Product datasheet Characteristics LC2D09E7 REVERSING CONTACTOR 575VAC 9A IEC Price* : 86.25 GBP Main Range Product name Product or component type Device short name Contactor application Utilisation category
More informationOperation Manual TX20 1/8 DIN Microcomputer Based ph/orp Controller with relays
Operation Manual TX20 1/8 DIN Microcomputer Based /ORP Controller with relays 11751 Markon Drive Garden Grove, CA. 92841 U.S.A. pg. 1 CONTENTS GENERAL INTRODUCTION.....3 INITIAL INSPECTION......3 USING
More informationDC Motors & Controls. DC2 DC Drives for 1/4 thru 2 Hp PMDC and Shunt Wound Motors. 1/4-2 Hp 115/230 VAC 1 Phase 50/60 Hz.
HVAC Farm Duty Brake 200 & 575 Volt & Controls DC 310 DC2 DC Drives for 1/4 thru 2 Hp PMDC and Shunt Wound DC & Controls 1/4-2 Hp 115/ 1 Phase 50/60 Hz. Applications: General purpose industrial use with
More informationPassive UTP Transceiver Hub with Integral Camera Power Installation Guide
Passive UTP Transceiver Hub with Integral Installation Guide Models Include: HubSat4D - Four (4) Channel Passive UTP Transceiver Hub with Integral HubSat42D - Four (4) Channel Passive UTP Transceiver includes
More informationProcess Transmitter RMA 422
Technical Information TI 072R/24/ae Process Transmitter RMA 422 Multi-functional 1-2 channel top hat DIN rail unit with loop power supply, alarm set point monitoring, mathematics function and 1-2 analog
More informationCG-1 CAMERA-GUARD INSTRUCTION BOOK IB647501
CG-1 CAMERA-GUARD INSTRUCTION BOOK IB647501 TABLE OF CONTENTS DESCRIPTION 2 MOUNTING INSTRUCTIONS 2 HOW TO CABLE THE CG-1 2 POWER SUPPLY INSTALLATION 3 OPERATION 3 CARE AND MAINTENANCE 3 APPLICATIONS (WHERE
More informationCURRENT INJECTION RELAY TESTER CR-100. ( Code P60212 (770081) ) INSTRUCTIONS MANUAL ( M / 05A ) (c) CIRCUTOR S.A.
CURRENT INJECTION RELAY TESTER CR-100 ( Code P60212 (770081) ) INSTRUCTIONS MANUAL ( M 981 329 / 05A ) (c) CIRCUTOR S.A. ---- CURRENT- TIME TRIP TESTER CR-100 --------------- Page. 2 CURRENT INJECTION
More informationI r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100
DATASHEET - NZMH2-A100 Circuit-breaker, 3p, 100A Part no. NZMH2-A100 Catalog No. 259099 Similar to illustration Delivery program Product range Circuit-breaker Protective function System and cable protection
More informationOrdering details. Approval. Classification
Datasheet - SRB 301MC-24V Guard door monitors and Safety control modules for Emergency Stop applications / General Purpose safety controllers (Series PROTECT SRB) / SRB 301MC Fit for signal evaluation
More information1900/25 Vibration Monitor
1900/25 Vibration Monitor BENTLY NEVADA MADE IN USA VIBRATION MONITOR OK ALERT DANGER BYPASS DISPLAY MOD E RESET NORMAL ALERT ALERT ADJUST LEVEL DANGER DANGER LEVEL ADJUST BUFFER ED TRANSDUCER 1 IN/SEC
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker
Magnetic and Hydraulic-Magnetic Circuit Breaker 850-... Description Single, two, three and four pole magnetic and hydraulic-magnetic circuit breakers with trip-free-mechanism and toggle or rocker actuation.
More informationAS09..S 3-pole Contactors - Spring Terminals
4 kw 5 hp AS09..S 3-pole Contactors - Spring AC Operated Description - 3-pole contactors with spring terminals, - N.C. or N.O. built-in auxiliary contact, - Rail-mounted, no tools required, - Additional
More informationDescription Set value in neutral conductor is synchronous with set value Ir of main pole. CSA 100. conductor. I r A 50-63
Circuit-breaker,4p,63A Partno. NZMH1-4-A63 Articleno. 284426 Similar to illustration Deliveryprogram Product range Circuit-breaker Protective function System and cable protection Standard/Approval IEC
More informationSafety Light Curtains
4 Safety Light Curtains F3SJ-A Safety Light Curtains Resolution: 14 mm (0.55 in.), 20 mm (0.79 in.), 25 mm (1.01 in.) 30 mm (1.18 in.), or 55 mm (2.17 in.) Range: 7 m (23 ft.) or 9 m (29.5 ft.) dependent
More information1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control
IEC Contactors and Starters. XT Family of Contactors Contactors and Starters Product Description The Eaton XT contactors and starters includes nonreversing and reversing contactors, overload relays and
More informationUDC100 Universal Digital Controller. Specification. Overview. Features. Features, continued /99 Page 1 of 4
UDC100 Universal Digital Controller 51-52-03-29 11/99 Page 1 of 4 Specification Overview The UDC100 Universal Digital Controller is a microprocessor-based 1/4 DIN low cost temperature controller. It combines
More informationAPPLICATIONS typical application: Lighting automation Other applications of the SO and SI line of controllers: HVAC automation Industrial automation OVERVIEW The S Series are microprocessor based I/O controllers
More informationPassive UTP Transceiver Hub with Integral Camera Power Installation Guide
Passive UTP Transceiver Hub with Integral Installation Guide Models Include: HubSat8D - Eight (8) Channels HubSat82D - HubSat8D w/eight (8) HubWayAv Balun/s for s HubSat83D - HubSat8D w/eight (8) HubWayDv
More informationAssembly. Front view. LEDs. Parametrization interface. Power Bus
otation Speed Monitor Features Assembly 1-channel signal conditioner 2 V DC supply Input for 2- or -wire sensors Input frequency 10 mhz... 50 khz elay contact output Start-up override and restart inhibit
More informationALLEN BRADLEY TIMING RELAY
ALLEN BRADLEY TIMING RELAY Configuration Details Product: 700-HS12BA1 Description: 700-HS General Purpose Square Base Timing Relay, On Delay Timer, 1.0 to 180 seconds, DPDT, 120V AC 50/60Hz CONTROL RELAY
More informationSignal Conditioners. Highlights. Battery powered. Line powered. Multi-purpose. Modular-style. Multi-channel. Charge & impedance converters
Signal Conditioners Highlights Battery powered Line powered Multi-purpose Modular-style Multi-channel Charge & impedance converters Industrial charge amplifiers & sensor simulators PCB Piezotronics, Inc.
More informationI r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100
DATASHEET - NZMC1-A160 Circuit-breaker, 3p, 160A Part no. NZMC1-A160 Catalog No. 283296 Similar to illustration Delivery program Product range Circuit-breaker Protective function System and cable protection
More informationQuick-disconnect cables. Adjustable mounting brackets
MiniSafe File No. LR90200 Operation MiniSafe 1.0 inch (25.4 mm) resolution 100 foot (30.5 m) range Individual Beam Indicator lights covered by U.S. and international patents Compact size 2.25 x 1.8 inches
More informationProtective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A
Deliveryprogramme Circuitbreak.3pselect.protection Partno. Articleno. 265777 NZMH4-VE1600 Product range Circuit-breaker Protective function Systems, cable, selectivity and generator protection Standard/Approval
More informationContactor 4 kw / 400 V with 3 Main Contacts and max. 4 Auxiliary Contacts Series 8510/122
www.stahl.de with 3 Main Contacts and max. 4 Auxiliary Contacts > Screw fastening version robust vibration resistant reliable > Corrosion resistant enclosure material > Easily accessible connection terminals
More informationMagnecraft Power Relays
Description DPST-NO, 30 A; DPDT, 30 A (NO) / 3 A (NC) Description The series power relays offer a small package size and features Class F insulation for a maximum coil temperature of 55 C (3 F). These
More informationLC1D09FE7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A V AC coil
Product datasheet Characteristics LC1D09FE7 TeSys D contactor - 3P(3 NO) - AC-3 -
More informationDirect PWM. 1000/2000 Series POWERBLOK MODULE
Direct PWM 1000/2000 Series POWERBLOK MODULE Features A universal servo-drive integrated on a Power Hybrid Module. Designed for direct PWM Servo Control Designed for use with Deta Tau's PMAC controllers
More informationWIRING INSTRUCTIONS CROP-LINK Drip Installation
WIRING INSTRUCTIONS 2011-14 CROP-LINK Drip Installation Items Covered In This Manual: Page 1: Crop Link Device Overview Page 2-3: Sensor Connections Page 4: Power and Relay Wiring Page 5-6: Specs and Warranty
More informationLC1D12P7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A V AC coil
Characteristics TeSys D contactor - 3P(3 NO) - AC-3 -
More informationSM-1100/SM-1500/SM-1600 ROTARY ACTUATORS
SM-1100/SM-1500/SM-1600 ROTARY ACTUATORS GENERAL DESCRIPTION The SM-1100, SM-1500 and SM-1600 Series are multi-turn, rotary actuators, designed to meet the exacting requirements for closed-loop modulating
More informationLAUREL ELECTRONICS, INC.
LAUREL ELECTRONICS, INC. Laureate Digital Panel Meter for Process, Strain & Potentiometer Follower Signals Features Selectable ±0.2, ±2, ±20, ±200, ±300 & ±600 Vdc voltage ranges Selectable ±2, ±20, ±200
More informationE6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm
Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.
More informationAnalog Input Module HART Ex i / I.S. Inputs, 8 Channels Type 9461/
> 8 channels for 2-wire HART transmitters > Intrinsically safe inputs Ex ia IIC > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit > Module
More informationActive UTP Transceiver Hub
Active UTP Transceiver Hub Installation Guide Models Include: HubWayEX16 - Sixteen (16) Channels HubWayEX32 - Thirty-two (32) Channels Z1409 Rev. 011810 More than just power. TM Table of Contents: Overview....pg.
More informationProtective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A
DATASHEET - NZMN3-VE630 Circuit-breaker, 3p, 630A Part no. NZMN3-VE630 Catalog No. 259133 EL-Nummer (Norway) 0004358791 Similar to illustration Delivery program Product range Circuit-breaker Protective
More informationMAXTECH, Inc. BRC-1000 Series. C-Band Redundant LNB Systems. Technology for Communications. System Block Diagrams
MAXTECH, Inc. Technology for Communications BRC-1000 Series C-Band Redundant LNB Systems Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic
More informationOperating Manual RISH OPTIMA VAF
Operating Manual RISH OPTIMA VAF 2-60-006-00-00511_Rev. A - 5/2014 Section DIGITAL MULTIFUNCTION INSTRUMENT Programmable Multi-function Digital Panel Meter Installation & Operating Instructions Contents
More informationAmplifier Systems. 1:1, Dual 1:1 and 1:2 Redundant Low-Noise. Back to
R Back to Amplifier Systems 1:1, Dual 1:1 and 1:2 Redundant Low-Noise The 1:1, dual 1:1 and 1:2 redundant lownoise amplifier (LNA) systems are designed to ensure continuous operation without disruption
More informationUNIVERSAL DIGITAL METER DC Volts and Amps AC RMS Volts and Amps Thermocouples and RTDs Process Signals Strain Gauge and Load Cell
99 Washington Street Melrose, MA 02176 Fax 781-665-0780 TestEquipmentDepot.com UNIVERSAL DIGITAL METER DC Volts and Amps AC RMS Volts and Amps Thermocouples and RTDs Process Signals Strain Gauge and Load
More informationHS-509 VIBRATION TRIP MODULE
HS-509 VIBRATION TRIP MODULE 1. Overview The HS-509 is a configurable trip amplifier capable of accepting a 4-20mA signal from a HS-420 sensor and providing two trip action relay outputs along with an
More informationSafety Light Curtains GuardShield
Description The Allen-Bradley Guardmaster safety light curtain is an economical, fully featured, Type 4 safety light curtain in a uniquely styled housing. safety light curtains are general purpose presence
More informationTeSys circuit-breakers
Thermal-magnetic motor circuit-breakers type GV2-ME GV2-ME with pushbutton control and screw clamp terminals (1) Standard power ratings Setting Magnetic Reference Weight of -phase motors range tripping
More informationSQM40/41 Actuators for air and gas dampers
SQM40/41 Actuators for air and gas dampers Description SQM40/41 actuators are used for the positioning of flow control valves, butterfly valves, dampers or any application requiring rotary motion. The
More informationHAL Series. Versatile range of production line testers.
HAL Series Versatile range of production line testers. The HAL comprehensive safety testers offer outstanding levels of flexibility and functionality to dramatically improve the quality and productivity
More informationMagnecraft General Purpose Relays 782 Power Series SPDT 20 A; DPDT 15 A
72 Power Series SPDT 20 A; DPDT 15 A UL listed when used with proper Magnecraft sockets The 72 Plug-in Power relays offer clear or full-feature covers with multiple mounting options and accessories. Feature
More informationI r A I i = I n x. Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100
Deliveryprogramme Circuitbr.,3pmotorprotection Partno. Articleno. 265784 NZMN4-ME875 Product range Circuit-breaker Protective function Motor protection Standard/Approval IEC Installation type Fixed Release
More informationwith handle LIMOGES Cedex 1. DESCRIPTION - USE 3. DIMENSIONS Symbol: Technology: Use:. For controlling a load remotely via a switch 2.
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 25A power contactors silent CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Dimensions... 1 4. Positioning - Connection...
More informationLC1D25G7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 25 A V AC coil
Product data sheet Characteristics LC1D25G7 TeSys D contactor - 3P(3 NO) - AC-3 -
More informationLC1D09B7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 24 V AC coil
Product data sheet Characteristics LC1D09B7 TeSys D contactor - 3P(3 NO) - AC-3 -
More informationLC1D12B7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 24 V AC coil
Characteristics TeSys D contactor - 3P(3 NO) - AC-3 -
More informationMAP110 AC-DC Series Data Sheet
Description Single-Output Model Selection VOLTAGE RANGE OUTPUT CURRENT OUTPUT CURRENT REGULATION REGULATION %p-p (NOTE 1) ACCURACY MAP110-1005 5V 4.95V to 5.50 16A 2 0.2% 1% 1% 5.09V to 5.11V MAP110-1012
More information110 Volt AC at 50 Hertz, 120 Volt AC at 60 Hertz. 20 Amp (UL Continuous), 7 Amp (AC-3), 22 Amp (AC-1)
80 South Street 7596-726, TX Nacogdoches Phone: 96-569-79 Fax: 96-560-685 XTCE007B0A PH FVNR 7A IEC Contactor Eaton Corp Catalog Number XTCE007B0A Manufacturer Eaton Corp Description Magnetic Contactor,
More informationFigure 1: Device components
Order No. : 2860 10 Order No. : 2830 10 Operation- and Assembly Instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe
More informationPRELIMINARY Sunny Boy 240-US
PRELIMINARY Sunny Boy 240-US SB 240-US-10 Optimized reliability Simple installation Unrivaled monitoring SMA-backed security Multigate technology allows for reduced component count Private band powerline
More informationSeries CDP2 Definite Purpose Contactors
Series 2 Definite Purpose High performance economical contactors for commercial applications up to 90 Sprecher + Schuh s Definite Purpose contactors are ideal for commercial applications including air
More informationQuick-disconnect cables. Adjustable mounting brackets
MiniSafe File No. LR90200 Description A MiniSafe consists of an identical length transmitter and receiver, combined with an STI Universal or DuoSafe Controller and appropriate interconnecting cables. The
More informationSoft starter, 66 A, V AC, Us= 24 V DC, with control unit, Frame size N. Function Soft starter for three-phase loads, with control unit
DATASHEET - S811+N66N3S Delivery program Soft starter, 66 A, 200-600 V AC, Us= 24 V DC, with control unit, Frame size N Part no. S811+N66N3S Catalog No. 168978 Eaton Catalog No. S811PLUSN66N3S EL-Nummer
More informationSingle output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
RoHS Lead-Solder-Exemption Compliant New 3.3 V and 5 V Output Models Universal Input 85-264 VAC Industry-Standard Footprint: 7.0" x 4.3" x 1.97" (177.8 x 109.2 x 50.0 mm) Input Transient & ESD Compliance
More informationWeekly Time Switch. Rated time Time setting range Time division 24 hrs x 7 days 00:00 to 23:59 1min
Weekly Time Switch Easy Programming with Large LCD Display and Interactive Functions Programming for 24 hrs x 7 days using just five switches. Sixteen program steps available. Power supply freely selectable
More informationLC1D32P7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 32 A V AC 50/60 Hz coil
Characteristics TeSys D contactor - 3P(3 NO) - AC-3 -
More informationAEXX-200F SERIES 4-DIGIT LINE FREQUENCY MONITORS
FN:200FMAN1.DOC AEXX-200F SERIES 4-DIGIT LINE FREQUENCY MONITORS DESCRIPTION AEXX-200F Series Line Frequency Monitors are precision large digital displays that measure power line frequency with a 0.01
More informationTransfer Switch. OTECA (Spec A) OTECB (Spec A) OTECC (Spec A) OTECD (Spec A) Amperes. English Original Instructions (Issue 5)
Operator Manual Transfer Switch 40-1000 Amperes OTECA (Spec A) OTECB (Spec A) OTECC (Spec A) OTECD (Spec A) English Original Instructions 10-2015 962-0131 (Issue 5) Table of Contents 1. SAFETY PRECAUTIONS...
More informationInductive linear position sensor LI300P0-Q25LM0-LIU5X3-H1151
Rectangular, aluminium / plastic Versatile mounting possibilities LED indicates measuring range Immune to electromagnetic interferences Extremely short blind zones 12 bit resolution 4-wire, 15 30 VDC Analog
More informationI r A Protection against direct contact Finger and back-of-hand proof to VDE 0106 part 100
Circuit-breaker,3p,400A Partno. LZMC3-A400-I Articleno. 111955 Similar to illustration Deliveryprogramme Product range Circuit-breaker Protective function System and cable protection Standard/Approval
More informationInstallation and Operating Instructions. Vari-Watt Power Controller
Installation and Operating Instructions VariWatt Power Controller PK555 003775459 October 208 VariWatt Power Controller General The Chromalox VariWatt Controller accepts an analog control signal input
More informationMATE3 Owner s Manual Addendum
Purpose MATE3 Owner s Manual Addendum This document is an addendum to 900-0117-01-00, Revision C of the MATE3 System Display and Controller Owner s Manual. It provides descriptions of changes to the MATE3
More informationLC3D180AV7 TeSys D - star delta starter - 3 x 3P (3 NO) - 18 A V AC coil
Characteristics TeSys D - star delta starter - 3 x 3P (3 NO) - 18 A - 400 V AC coil Main Range Product name Product or component type Device short name Contactor application Utilisation category Device
More informationLC1D80F7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 80 A V AC 50/60 Hz coil
Product datasheet Characteristics LC1D80F7 TeSys D contactor - 3P(3 NO) - AC-3 -
More informationType Contact form Model
Low Signal Relay G6A High sensitivity can be driven by digital circuits. Low-profile design allows use in.70 mm (0.50 in) PC board rack. Surge withstand meets FCC Part 68 regulation. Units can be mounted
More informationSeries CDP2 Definite Purpose Contactors
Series CDP2 Definite Purpose Contactors High performance economical contactors for commercial applications up to 90 Sprecher + Schuh s Definite Purpose contactors are ideal for commercial applications
More informationORDERING Page 6 STANDARDS, DIMENSIONS and ACCESSORIES Request bulletin SDA
BE1-59NC CAPACITOR NEUTRAL OVERVOLTAGE RELAY The BE1-59NC Capacitor Neutral Overvoltage Relay provides sensitive protection for capacitor banks. ADVANTAGES Helps avoid cascading capacitor failures. Sensing
More informationPower Circuit of a UL508A Panel. Typical UL489 Application
Typical UL489 Application Power Circuit of a UL508A Panel Disclaimer: This is an application example. Installation should be done by a qualified electrician under the guidance of UL specifications.. Altech
More informationAE-341 SERIES PROCESS INDICATORS 2 TO 6 DIGITS 0-20 MA, 4-20 MA, 0-5V, OR 0-10V SCALED INPUT
FN: 341MAN1.DOC AE-341 SERIES PROCESS INDICATORS 2 TO 6 DIGITS 0-20 MA, 4-20 MA, 0-5V, OR 0-10V SCALED INPUT DESCRIPTION AE Series Process Indicators are available with 1", 2.3", 4", 8", or 12" high digits,
More informationTELEDYNE HASTINGS INSTRUMENTS
DVT (Digital VT) DCVT (Digital CVT) www.teledyne-hi.com TELEDYNE HASTINGS INSTRUMENTS Vacuum Measurement RANGES DV-4 (0.1 20 Torr) DV-5 (0.1 100 mtorr) DV-6 (1 999 mtorr) FEATURES Linear Analog Output
More informationI r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100
Circuit-breaker,3p,160A Partno. NZMN2-M160 CatalogNo. 265724 Similar to illustration Deliveryprogram Product range Circuit-breaker Protective function Motor protection Standard/Approval IEC Installation
More information