1 1/2 13.5, 625 JCASS)

Transcription

1 CX T135P3625JCASS COEX Cable in Conduit, 1 1/2 in, SDR 13.5, terracotta (P3 625 JCASS) Coaxial cable-in-conduit Nominal Size 1-1/2 in Wall Thickness Designation SDR 13.5 Length m ft Weight lb/kft Cable-In-Conduit Type Cable Type Conduit Type Color Wall Type P3 in duct 625 series Non-toneable Terracotta Smooth Included Products P3 625 JCASS 75 Ohm P3 Trunk and Distribution Cable, black PE jacket, flooded for underground CX T135 EMPTY DUCT COEX Empty Conduit, 1 1/2 in, SDR 13.5, terracotta P3 625 JCASS SM MT 75 Ohm P3 Trunk and Distribution Cable, black PE jacket, flooded for underground All specifications are subject to change without notice. See for the most current information. Revised: June 26, 2017 page 1 of 7

2 P3 625 JCASS 75 Ohm P3 Trunk and Distribution Cable, black PE jacket, flooded for underground Coaxial hardline cable Construction Materials Corrosion Protection Jacket Material Center Conductor Material Construction Type Dielectric Material Outer Conductor Material Migraheal PE Copper-clad aluminum Swaged Foam PE Aluminum Diameter Over Center Conductor, nominal mm in Diameter Over Dielectric, nominal mm in Diameter Over Outer Conductor, nominal mm in Diameter Over Inner Jacket, nominal mm in Diameter Over Jacket, nominal mm in Armor Thickness, nominal mm in Inner Jacket Thickness, nominal mm in Jacket Thickness, nominal mm in Outer Conductor Thickness, nominal mm in Cable Length 732 m 2400 ft Shipping Weight lb/kft Electrical Specifications dc Resistance, Inner Conductor, nominal 0.84 ohms/kft dc Resistance, Outer Conductor, nominal 0.26 ohms/kft dc Resistance, Loop, nominal 1.10 ohms/kft dc Resistance Note Nominal values based on a standard condition of 20 C (68 F) Capacitance 50.2 pf/m 15.3 pf/ft Capacitance Tolerance ±1.0 pf/ft Characteristic Impedance 75 ohm Characteristic Impedance Tolerance ±2 ohm Jacket Spark Test Voltage 5000 Vac Nominal Velocity of Propagation (NVP) 87 % Operating Frequency Band MHz MHz Structural Return Loss MHz Environmental Specifications page 2 of 7

3 P3 625 JCASS Environmental Space Buried Cable Type 625 series Jacket Color Black Packaging Type Reel Short Description P3 625 JCASS SM PR997 Warranty One year Mechanical Specifications Minimum Bend Radius, bonded mm 4.50 in Pulling Tension, maximum 215 kg 475 lb Electrical Performance Frequency Attenuation (db/100 m) Attenuation (db/100 ft) 5 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz * Attenuation listed represents maximum values at standard condition of 20 C (68 F) Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008 Classification Compliant Designed, manufactured and/or distributed under this quality management system page 3 of 7

4 CX T135 EMPTY DUCT COEX Empty Conduit, 1 1/2 in, SDR 13.5, terracotta Empty conduit Nominal Size 1-1/2 in Wall Thickness Designation SDR 13.5 Inner Diameter, nominal mm in Length m ft Outer Diameter, nominal mm in Wall Thickness, minimum mm in Weight lb/kft Color Conduit Type Wall Type Warranty Terracotta Non-toneable Smooth One year Material Specifications Density Test Method ASTM D792A Density, maximum g/cm³ Density, minimum g/cm³ Design Standard ASTM D Environmental Stress Crack Resistance Failure rate of 10% within 96 hours Environmental Stress Test Method ASTM D1693, ESCR Condition B Flexural Modulus, minimum 552 N/mm² psi Flexural Property Test Method ASTM D790 Hydrostatic Design Basis Not pressure rated Hydrostatic Design Test Method ASTM D2837 Material Type High density polyethylene (HDPE) Melt Flow Rate Test Method ASTM D1238 Melt Flow Rate, maximum 0.39 g/10 min All specifications are subject to change without notice. See for the most current information. Revised: June 26, 2017 page 4 of 7

5 CX T135 EMPTY DUCT COEX Tensile Property Test Method ASTM D638 Tensile Strength at yield, minimum 21 N/mm² 3000 psi Mechanical Specifications Minimum Bend Radius, unsupported mm 20.0 in Pulling Tension, maximum kg lb Regulatory Compliance/Certifications Agency Classification ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system * Footnotes Environmental Stress Crack Resistance ESCR Environmental Stress Crack Resistence All specifications are subject to change without notice. See for the most current information. Revised: June 26, 2017 page 5 of 7

6 P3 625 JCASS SM MT 75 Ohm P3 Trunk and Distribution Cable, black PE jacket, flooded for underground Coaxial hardline cable Construction Materials Corrosion Protection Jacket Material Center Conductor Material Construction Type Dielectric Material Outer Conductor Material Migraheal PE Copper-clad aluminum Swaged Foam PE Aluminum Diameter Over Center Conductor, nominal mm in Diameter Over Dielectric, nominal mm in Diameter Over Outer Conductor, nominal mm in Diameter Over Inner Jacket, nominal mm in Diameter Over Jacket, nominal mm in Armor Thickness, nominal mm in Inner Jacket Thickness, nominal mm in Jacket Thickness, nominal mm in Outer Conductor Thickness, nominal mm in Cable Length 732 m 2400 ft Shipping Weight lb/kft Electrical Specifications dc Resistance, Inner Conductor, nominal 0.84 ohms/kft dc Resistance, Outer Conductor, nominal 0.26 ohms/kft dc Resistance, Loop, nominal 1.10 ohms/kft dc Resistance Note Nominal values based on a standard condition of 20 C (68 F) Capacitance 50.2 pf/m 15.3 pf/ft Capacitance Tolerance ±1.0 pf/ft Characteristic Impedance 75 ohm Characteristic Impedance Tolerance ±2 ohm Jacket Spark Test Voltage 5000 Vac Nominal Velocity of Propagation (NVP) 87 % Operating Frequency Band MHz MHz Structural Return Loss MHz Environmental Specifications page 6 of 7

7 P3 625 JCASS SM MT Environmental Space Buried Cable Type 625 series Jacket Color Black Packaging Type Reel Warranty One year Mechanical Specifications Minimum Bend Radius, bonded mm 4.50 in Pulling Tension, maximum 215 kg 475 lb Electrical Performance Frequency Attenuation (db/100 m) Attenuation (db/100 ft) 5 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz * Attenuation listed represents maximum values at standard condition of 20 C (68 F) Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008 Classification Compliant Designed, manufactured and/or distributed under this quality management system page 7 of 7