17 19 PROFESSIONAL LCD COLOUR MONITOR ART

Transcription

1 17 19 PROFESSIONAL LCD COLOUR MONITOR ART Via Don Arrigoni, Rovetta S. Lorenzo (Bergamo) export.department@comelit.it

2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. CAUTION: Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended.to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. 2

3 Important safeguards Risk of electric shock Do not open To reduce the risk of electric shock, do not remove the back cover. There are no user-serviceable parts inside. Removing the back cover voids the warranty. Have your LCD AV repaired by qualified service personnel only. Warnings and precautions Do not place your hands, face, or objects close to the ventilation openings of you LCD AV. The top of your LCD AV gets very hot from exhaust air that is released through the ventilation openings. Burns or personal injuries may occur if you are too close the LCD AV. Damage may occur if you place any object near the top of your LCD AV. Disconnect all cables before moving you LCD AV. Moving you LCD AV with its cables attached may damage the cables and cause fire or electric shock danger. Do not expose you LCD AV to rain or moisture. Keep your LCD AV away from excessive dust, high temperatures, moisture, or direct sunlight. Use your LCD AV in a well-ventilated area and do not cover the ventilation openings. Do not modify your LCD AV or use an unshielded power cord or video input source cable, or you may experience excessive interference. Disconnect your LCD AV and unplug the power cord when the AV is not used for a long period of time. If the picture displayed is in any way abnormal, turn off your LCD AV, then disconnect it from the electrical outlet. Make sure that your video input source cable is connected correctly, then reconnect your LCD AV to the electrical outlet. Disconnect your LCD AV from the electrical outlet before cleaning or performing maintenance. Do not use liquid or aerosol cleaners. Use only a slightly damp cloth for cleaning. Do not place your LCD AV on an unstable cart, stand, or table. Your LCD AV may fall, causing serious damage. 3

4 Safety Precautions Chapter 6 Safety, Regulatory and Legal Information US Regulatory compliance statements Your LCD AV has been tested and found to comply with the limits for a Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Your LCD AV generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference with not occur in a particular installation. If your LCD AV does cause harmful interference to radio or television reception, which can be determined by turning your LCD AV off and on, the user is encouraged to try to correct the interference by one or more the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/av technician for help. Warning: Use only shielded signal cables to connect I/O devices to your LCD AV. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could viold your authority to operate the LCD AV. FCC STATEMENT This LCD AV complies with part 15 FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference. (2) This LCD AV must accept and interference received, including interference that may cause undesired operation. Canada Regulatory compliance statements This LCD AV does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. 4

5 Table of contents Warning. 2 Important Safeguards. 3 Safety Precautions.. 4 Table of Contents 5 Components... 5 Feature. 6 Exploring Your New Monitor.. 7 Function Keys Instructions for AV I/O Connection Menu Setup-IMAGE Menu Setup-PIP. 11 Menu Setup-SYSTEM 12 Menu Setup-VGA. 13 Specifications.. 14 Wall Mountable Dimensions Components (1) LCD Color Monitor 1 (2) Accessories (A) Power cord 1 (B) User Manual 1 (C) Adapter 1 (D) PC audio cord 1 (E) VGA cord 1 5

6 Feature 1. Professional TFT LCD for surveillance. 2. Compatible with VGA(640X480), SVGA(800X600), XGA(1024X768), SXGA(1280X1024) resolution,(sxga for 17/19" LCD only). 3. All plastic case. 4. Video input BNC x 1 / VGA x 1 / S-Video x Video output BNC x Audio input RCA x 2 / phone jack x Audio speaker x Full / Under / Over scale mode. 9. Picture-In-Picture feature that allow multi-picture display. 10. Built-in 3D comb filter and 3D de-interlace for crispy picture performance. 11. Fast response time and refresh rate without time lagging. 12. Provides 6500 K and 9300 K color temperature se lection for user's preference. 13. Provides key lock and power memory function for easy management. 14. Cam mode control that enable auto-adjust incoming video signal level 15. Video looping Output supports 75ohm auto termination. 16. VESA standards (100mm X 100mm) bracket. 17. High brightness level and contrast ration with super wide viewing angle. 6

7 Exploring Your New Monitor You can operate your monitor by using the buttons on the front panel. Front Panel Back Side 7

8 Function Keys Instruction for AV Up: Select menu item Down: Select menu item MENU Menu: Push this button to display the main OSD menu / select item of next level Right : Increase the setting of selected item Left : Decrease the setting of selected item SOU/AOU Source: Change input source / to return to last OSD control level Power: Turn on or off the monitor power 8

9 I/O Connection: Illustration: Video Out is present in AV video out Video In is present in AV video in PC Audio In is present in PC audio in Audio In 1 is present in AV audio in Audio In 2 is present in S-Video audio in S-Video In is present in S-Video video in VGA In is present in PC - VGA signal in Power In is present in Power in 9

10 Menu Setup - IMAGE Brightness: picture brightness adjustment min. ~ max.:0~100 / Default: 55 Contrast: picture contrast adjustment min. ~ max.:0~100 / Default: 50 Color Temp: Saturation: selects color temperature of 6500 K or 9300 K. picture saturation adjustment min. ~ max.:0~100 / Default: 50 Hue: to adjust the color tint value min. ~ max.:0~100 / Default: 50 Scan Mode: Sharpness: to change the display mode Full/Under/Over. sets the desired sharpening enhancement to the picture min. ~ max.:0~20 / Default: 5 Cam Mode: camera video compatibility and performance. 10

11 Menu Setup - PIP PIP Mode: PIP Source: this function allows the PIP mode to be selected. the function allows the PIP Sub source to be selected. PIP H.Position: picture in picture window horizontal position. PIP V.Position: picture in picture window vertical position. PIP Swap: enable PIP sources switching. 11

12 Menu Setup - SYSTEM OSD Timeout: select 5 ~ 60 to determine the time menu show on screen. Default: 30 OSD H.Position: OSD V.Position: Mute: Channel Display: Auto Source: OSD horizontal position. OSD vertical position. to disable the audio function. Default: OFF select ON/OFF. Default: ON the monitor will auto detect the video source when power ON. Select ON / OFF. Default: OFF Key Lock: administrator control to protect monitor setting. MENU button + SOU/AOU button for un-key lock Reset: restore all settings to Factory default. 12

13 Menu Setup - VGA H-position : V-position: Phase: Clock: Auto Adjust: allows adjustment for horizontal position. allows adjustment for vertical position. is used to adjust best picture quality. It adjusts the sampling phase across one pixel time. When the phase is not adjusted properly, the picture will be unclear. Therefore this value should be carefully adjusted. Note: improper adjustment will cause image failure. is used to adjust best picture quality. It adjusts the numbers of the pixel clock across one line time. Therefore it can affect the picture position and size. Note: improper adjustment will caused image failure. auto detect screen detail data such as clock and phase. 13

14 Specifications Model Button Control Menu, VOL-, VOL+, Up, Down, Source, Power Display Resolution 1280 x 60/75 Hz 1280 x 60/75 Hz Active Area 432.7mm diagonal 481.9mm diagonal LCD Panel Type TN mode, normally white Dot Pitch (H) x (V) mm (H) x (V) mm Display Ratio 5:4 Display Color 16.7M colors Brightness (central) 250cd/m2 (*) Contrast Ratio 1000 :1 800 :1 Viewing Angle Left 85 / Right 85 / Up 75 / Down 85 CR>10 Response Time 5ms Input Voltage V AC, 60Hz / 50Hz Input Signal 1Vp-p composite video Input Impedance 75 ohm Output Impedance 1.0Vp-p ± 0.2Vp-p composite video ( Auto Termination) 14

15 Scanning system NTSC: 525 lines, 60 fields / sec; PAL: 625 lines, 50 fields / sec VGA Input 15 pin D-SUB connector Video Input/ Output BNC x 1 / BNC x 1 Looping Output Auto Termination Audio Input Audio In x 2, PC-Audio In x 1 S-Video 4-pin DIN connector Speakers 1W + 1W Power Consumption (**) 40W Operating Temperature 0 C ~ 50 C (32 F ~ 122 F) Storage Temperature -10 C ~ 60 C (14 F ~ 140 F) Power Supplier Adapter: output 12V DC 5A/ Input 90 ~ 240V AC Dimensions (W x H x D) 372 x 353 x 52 mm 420 x 400 x 54 mm (*) Brightness depends on what panel is used. Panel specifications is subject to change without notice. (**) Power consumption depends on what panel is used. Panel specifications is subject to change without notice. 15

16 Wall mountable Wall Mountable M4 M4 M M4 x 16L User please use the correct screw type when installation. The desktop bracket and mount type bracket can use the same screw 16

17 Dimensions Via Don Arrigoni, Rovetta S. Lorenzo (Bergamo) export.department@comelit.it 17