Functional overview. System configuration FAQ

Size: px
Start display at page:

Download "Functional overview. System configuration FAQ"

Transcription

1 Vdc /110/115/12 110/125V D C MDE IN JPN RSM100 (Relay Setting and Monitoring System) The PC interface software RSM100 allows users to access Toshiba GR-series relays from a local or remote personal computer (PC), to view active data or data stored in the relay, to analyze the data, and to change the settings. Relay LINE DIFFERENTIL PROTECTION RS-232C Personal computer D-type 9-way connector Straight-through type Functional overview System configuration FQ 1

2 Functional overview RSM100 supports the following functions:. Viewing and analyzing records Event, fault and disturbance records stored in the relay can be extracted and sequentially displayed (in the order of occurrence). They can be stored in the PC and printed out. Waveform data in the disturbance record can be displayed, edited, measured and analyzed in detail. Viewing active data Power system quantities measured by the relay, status of binary inputs, binary outputs and measuring elements of the relay are retrieved and displayed. 2

3 Viewing and changing settings Setting data in the relay can be extracted and displayed. They can be edited on-line or off-line and transferred to the relay to change the settings. Test functions Switches can be set to block automatic monitoring or to enable testing using a single voltage source. Settings required to test measuring elements and timers can be set. utomatic testing can be started manually. 3

4 System configuration Minimum System Configuration The minimum system configuration required to run RSM100 is as follows: Personal computer (PC) provided with the minimum system requirement for the installed operating system. (*) Operating system: Windows 7, English version (**) Windows 8.1, English version (**) Windows 10, English version which is equal or larger than 1607 (**) ternet Explorer TM (Version 7 or later) (**) Hard disk: 100 M or more required for RSM100 software Display: pixels or more PC/T keyboard Pointing device (Mouse, Track ball, etc.) CD-ROM device RS-232C port (D-type 9-way connector, straight-through type): Refer to the following figure. PC RELY RS-232C cable (RD) (TD) (GND) (RTS) (CTS) Straight Through Connection (Open) (Open) (Open) (Open) Note: (*) The PC, whose installed operating system serves user for comfortable operation, is recommended. For details, refer to the web site of Microsoft Corporation. (**) Windows and ternet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. 4

5 Vdc /110/115/12 110/125V DC MDE IN JPN ccess from a local PC Connect the local PC with the relay by connecting an RS-232C cable to the RS-232C port at the lower left corner of the front panel of the relay. Relay LINE DIFFERENTIL PROTECTION RS-232C Personal computer D-type 9-way connector Straight type 5

6 T yp e Mod el /110 /115/ 12 Vdc 110/12 5V D C MDE IN JPN Mo del 100/ 11 0/115 / Hz Vdc 110/ 125V DC M DE IN JPN LINE DIFFERENTIL PROTECTION LINE DIFFERENTIL PROTECTION T ype M odel I n f n TRI P /1 10/115 /120 V Vdc 11 0/125V DC M DE IN JPN Vdc 5 0Hz /110/11 5/ /125V DC MD E IN JPN LINE DIFFERENTIL PROTECTION LINE DIFFERENTIL PROTECTION OVERCURRENT RELY 0.0 GR D Typ e M odel I n -- f n 5 0Hz Vdc 110/1 25V DC Made in Japan Ty pe IN SERVIC E GRD Vdc 11 0/ 125V DC Made in Japa n OVERCURRENT RELY 0.0 TX RX POWER IRIG- PROTOCOL CONVERTOR TYPE G1PR NO. VOLTGE DC Corporation MDE IN J P N OVERCURRENT RELY 0.0 OVERCURRENT RELY 0.0 T yp e M ode l -- Ty pe GRD Vdc 11 0/ 125V DC Ma de in Japa n GRD Hz Vdc 110 /125V DC M ade in Japan Ty pe M odel Mo del 100/ 11 0/115 / /11 0/ 115/1 2 Vd c 110 /12 5V DC MDE I N JPN 50 Hz Vdc 110/ 125V DC M DE IN JPN 1 50 Hz LINE DIFFERENTIL PROTECTION LINE DIFFERENTIL PROTECTION Ty pe Mo de l Mo del 100/110 /115 / /11 0/1 15/1 2 Vd c 110/ 12 5V DC MDE I N J PN Vdc 110/1 25V DC M DE IN JPN 1 50 Hz POWER RX OPT TX OPT POWER RX OPT TX OPT LINE DIFFERENTIL PROTECTION OPTICL OPTICL INTERFCE UNIT UNIT G1I F Vdc 11 dc/ 10 ac terfac e RS485 M DE IN JP N LINE DIFFERENTIL PROTECTION OPTICL OPTICL INTERFCE UNIT UNIT G1IF Vdc 11 dc/ 10 ac terfac e RS485 M DE I N JP N ccess from a remote PC The figures below show the configuration of the RSM system. The relays are connected to the RS-232C port of the remote PC via a protocol converter (type G1PR2) and a communications network (WN, telephone line via modems, etc). Connection via RS485 The relays are connected through twisted-pair cables and up to 32 relays can be connected. The total length of twisted-pair cable should not exceed 1200 m. RS232 COMMUNICTIONS NETWORK PROTOCOL CONVERTOR RS OPTICL/RS485 INTERFCE OPTICL/RS485 INTERFCE

7 Va 63. 5V Vb 63. 5V Vc 63. 5V Vdc /110/115/12 110/125V DC MDE IN JPN LINE DIFFERENTIL PROTECTION Vdc /110/115/12 110/125V DC MDE IN JPN LINE DIFFERENTIL PROTECTION OVERCURRENT RELY GRD Vdc 110/125V D C Made in Japan TX RX POWER IRIG- TYPE NO. VOLTGE PROTOCOL CONVERTOR G1PR Corporation MDE I N JP N Connection via fibre optic cable The relays are connected through fibre optic cables and up to 8 relays can be connected. The length of each fibre optic cable should not exceed 1200 m (using 62.3/125mm GI fibre). RS232 COMMUNICTIONS NETWORK PROTOCOL CONVERTOR RS DC

8 FQ The following lists show frequently asked questions and answers regarding the RSM100 software and waveform data analysis software. RSM Q. RSM100 cannot connect to a relay.. Check the following: -Check that the relay is powered up. -t both relay and PC, check that the connecting cable is securely attached. -Check that the connecting cable is the straight-through type. -RSM100 is designed for upward compatibility, so a relay cannot be connected when using RSM100 of a revision older than that supplied with the relay. -If RSM100 is re-installed, it is first necessary to delete the older version. -If possible, disconnect and then re-connect the power to the relay and then attempt to connect the PC again. Check the following Communication-Option settings. -Check that RS232C is selected. -Check that the COMM port number in use corresponds to the setting number. -Check that the transmission rate of RSM100 corresponds to that of the relay. -Check that 9600bps is selected in case of a relay type without transmission rate setting. Q. The setting data file, saved by an old version of RSM100, cannot be opened by a new version of the RSM100.. First, save the file in Off-line mode, and then open the saved file in On-line mode. Q. It takes time to display the Menu screen when connecting to a relay.. It may take time from specifying the relay model and the file name to displaying the Menu screen depending on type of PC. Therefore, please wait for a while. Q. Printout data of a Group other than that of ctive Group saved when the saved file is open in off-line operation.. First, open the file and change ctive Group into a Group to printout, and return the Setting menu, and save the changed ctive group with new file name. nd then, open the new file again and printout the changed ctive group data. Q. different item is displayed when opening the file by RSM100 whose version is older than that when it has been saved.. Configuration data for displaying may be different between them. Try to open the file the version of RSM100 when it has been saved, or the later. Q. setting box is blank and an item is not displayed when connecting to a relay.. The version of RSM100 may be old. Use the version of RSM100 attached with the relay or the later. 8

9 Waveform data analysis 1 Q. When displaying waveform records without voltage, messages of No 3-phase voltages. and No voltage drops. are shown.. default, the fault information is calculated automatically as Measurement Result of Fault Section when data is opened. The above messages are shown in the case of no voltage. So click [Set] on menu bar, click [Option] in the drop-down menu, and remove the checkmark of Fault Section Calculation in the dialog box. nd then the messages aren t shown from the next starting. 2 Q. spite of inputting current by three-phase equilibrium, all is the same phase in Vector diagram.. Vector diagram, the default setting of phase reference angle is Phase Voltage even though the model without voltage. So change the phase reference angle Phase Voltage into a current. Click [Set] on menu bar, click [Reference phase] in the drop-down menu, and select the desired channel and current in the Channel and Phase order drop-down list boxes. 3 Q. When displaying the RMS value in the GR100 relay, only certain channel s voltage or current information is shown.. If other channel s voltage or current information will be shown, click [Set] on menu bar, click [Phase rotation] in the drop-down menu, and select any channel s voltage or current in the drop-down list box. 4 Q. The phase angle display is --- in RMS value.. The default setting of phase reference angle is Phase Voltage even though the model without voltage. So change the phase reference angle into a current. Click [Set] on menu bar, click [Reference phase] in the drop-down menu, and select the desired channel and current in the Channel and Phase order drop-down list boxes. 5 Q. The upper half of RMS value is all The upper half of the screen for RMS value displays voltage information and the lower half of that current information. Therefore the upper half is shown as --- in the case of the model without voltage and the lower half is --- in the case of the model without current. 6 Q. Symmetrical Component, the positive, the negative and the zero sequence components are displayed, it isn t clear what voltage or current has these components.. This function displays the positive, the negative and the zero sequence components of the voltage or current selected by [Set] menu. So, click [Set] on menu bar, click [Phase rotation] in the drop-down menu, and read the selected voltage or current. 7 Q. It is hard to see the waveform of inary data for its yellow color.. Change the color as follows: Click [File] on menu bar, click [Properties] in the drop-down menu, click [Elements] button in the dialog box, click [inary Elements(CH select)], select the data, click [Edit] button, and select the Ch number (data) and desired color in the drop-down list boxes. 9

10 8 Q. When viewing the recorded waveform, it takes long time to designate the file by starting RSM100.. y running hakei.exe as an executable file in the installed folder and opening the waveform file (extension OSC), it is not necessary to start RSM100 for displaying the waveform. nd it is more convenient that the files with extension OSC run hakei.exe directly by the folder option of Explorer. 9 Q. The waveform displayed by disturbance record would like to be stored as COMTRDE file type.. Designate the file name and the place to store by clicking [nalysis] on menu bar and [Save s ComTrade File ] in the drop-down menu. 10 Q. The saved waveform data file cannot be open.. Make sure the software version of the waveform data analysis. Open the file by the latest version. The version can be checked with the [Help] menu. 11 Q. Cannot print waveform data on setting the direction of paper to width in the [Print Waveform] menu.. This function is not supported depending on the printer, however, it is possible by the following procedure. (1) Click [File] [Print] [Print Waveform] and display the [Print Waveform] dialog box. (2) Click [Print Setup] and display the [Print Setup] dialog box. (3) Select the 3 for original size in page setting, and select the 4 for output paper size. (4) Execute the print after setting the direction of paper to width. 12 Q. There is a difference between the number of characters of Signal name set on the Setting screen between that of the name displayed as binary signal in Waveform.. The name of binary signal can be displayed up to 12 characters. Therefore, it is recommended the maximum 12 characters are set on the Setting screen. Trademarks used in this text: Microsoft, Windows 7 Windows 8.1, Windows 10 and ternet Explorer are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names of their products. Energy Systems & Solutions Corporation disclaims any proprietary interest in trademarks and trade names other than its own. 10

Aurora Grid-Tie Installation Instructions (Model Number: PVI-3.0-OUTD-US-W) Revision 4.1

Aurora Grid-Tie Installation Instructions (Model Number: PVI-3.0-OUTD-US-W) Revision 4.1 Aurora Grid-Tie Installation Instructions (Model Number: PVI-3.0-OUTD-US-W) Revision 4.1 Contents 1) Grid-Tie Installation Block Diagram... 3 2) Installation Steps.... 4 2.1) Initial Setup.... 4 2.1.1)

More information

VIDEO ALARM VERIFICATION UNIT VIVER

VIDEO ALARM VERIFICATION UNIT VIVER VIDEO ALARM VERIFICATION UNIT VIVER viver_en 09/08 The VIVER module provides remote video alarm verification, based on image sequences transmitted from cameras installed in the protected facility. The

More information

Configuration Vestas VMP3500

Configuration Vestas VMP3500 Configuration Vestas VMP3500 1. Table of contents 1. Table of contents... 2 2. Introduction... 3 3. Vestas turbines (RCS)... 4 3.1. VMP 3500 controller... 4 3.2. Communication with the CT3230 current loop

More information

Ultra 4K Tool Box. Version Release Note

Ultra 4K Tool Box. Version Release Note Ultra 4K Tool Box Version 2.1.43.0 Release Note This document summarises the enhancements introduced in Version 2.1 of the software for the Omnitek Ultra 4K Tool Box and related products. It also details

More information

SignalTap Plus System Analyzer

SignalTap Plus System Analyzer SignalTap Plus System Analyzer June 2000, ver. 1 Data Sheet Features Simultaneous internal programmable logic device (PLD) and external (board-level) logic analysis 32-channel external logic analyzer 166

More information

AMIQ-K2 Program for Transferring Various-Format I/Q Data to AMIQ. Products: AMIQ, SMIQ

AMIQ-K2 Program for Transferring Various-Format I/Q Data to AMIQ. Products: AMIQ, SMIQ Products: AMIQ, SMIQ AMIQ-K2 Program for Transferring Various-Format I/Q Data to AMIQ The software AMIQ-K2 enables you to read, convert, and transfer various-format I/Q data files to AMIQ format. AMIQ-K2

More information

G4500. Portable Power Quality Analyser. Energy Efficiency through power quality

G4500. Portable Power Quality Analyser. Energy Efficiency through power quality G4500 Portable Power Quality Analyser Energy Efficiency through power quality The BlackBox portable series power quality analyser takes power quality monitoring to a whole new level by using the revolutionary

More information

Fiber Optic Extender User Manual. Model: CV-F01-TX

Fiber Optic Extender User Manual. Model: CV-F01-TX Fiber Optic Extender User Manual Model: CV-F01-TX 1. I/O Connectors Figure 1 CV-F01-TX Fiber Optic Transmitter I/O Connectors 2. Connection introduction Figure 2 CV-F01-TX Fiber Optic Transmitter Connection

More information

INSTRUCTION MANUAL BREAKER FAILURE RELAY GRC100

INSTRUCTION MANUAL BREAKER FAILURE RELAY GRC100 INSTRUCTION MANUAL BREAKER FAILURE RELAY GRC100 Toshiba Energy Systems & Solutions Corporation 2017 All Rights Reserved. ( Ver. 1.5) Safety Precautions Before using this product, please read this chapter

More information

DM1624, DM1612, DM812

DM1624, DM1612, DM812 Installation Guide Hardware and Software DM Series Digital Processors models DM1624, DM1612, DM812 LECTROSONICS, INC. 1 Installation Specific Information Only This guide covers only installation related

More information

Accessories EXP1 - cards to 19 rack extending the number of 1Vpp outputs to 3 at one-input cards

Accessories EXP1 - cards to 19 rack extending the number of 1Vpp outputs to 3 at one-input cards BREAK-TW-V.4/4, BREAK--V.4/4 BOX DIN RACK IP56 Optoconverters are designed to transfer videosignal and or data. I FM modulation I AGC optical loss I Universal for MM and SM fibres I Up to 3 independent

More information

Wireless Studio. User s Guide Version 5.1x Before using this software, please read this manual thoroughly and retain it for future reference.

Wireless Studio. User s Guide Version 5.1x Before using this software, please read this manual thoroughly and retain it for future reference. 4-743-161-12 (1) Wireless Studio User s Guide Version 5.1x Before using this software, please read this manual thoroughly and retain it for future reference. DWR-R01D/R02D/R02DN/R03D 2018 Sony Corporation

More information

PRELIMINARY INFORMATION. Professional Signal Generation and Monitoring Options for RIFEforLIFE Research Equipment

PRELIMINARY INFORMATION. Professional Signal Generation and Monitoring Options for RIFEforLIFE Research Equipment Integrated Component Options Professional Signal Generation and Monitoring Options for RIFEforLIFE Research Equipment PRELIMINARY INFORMATION SquareGENpro is the latest and most versatile of the frequency

More information

ivw-ud322 / ivw-ud322f

ivw-ud322 / ivw-ud322f ivw-ud322 / ivw-ud322f Video Wall Controller Supports 2 x 2, 2 x 1, 3 x 1, 1 x 3, 4 x 1 & 1 x 4 Video Wall Array User Manual Rev. 1.01 i Notice Thank you for choosing inds products! This user manual provides

More information

DXI SAC Software: Configuring a CCTV Switcher. Table of Contents

DXI SAC Software: Configuring a CCTV Switcher. Table of Contents APPLICATION NOTE MicroComm DXI DXI SAC Software: Configuring a CCTV Switcher Table of Contents 1. Intent & Scope... 2 2. Introduction... 2 3. Options and Parameters... 2 3.1 When to switch the CCTV...2

More information

MBUS 10 RS232 TO MBUS LEVEL CONVERTER

MBUS 10 RS232 TO MBUS LEVEL CONVERTER Media and protocol converters MBUS 10 RS232 TO MBUS LEVEL CONVERTER RS232 to MBus level conversion Maximum 10 MBus slaves Baud Rate: 300 to 19200 bps RS232 MBus opto isolation Over-current and short-circuit

More information

VGA AUDIO SWITCHER S MANUAL

VGA AUDIO SWITCHER S MANUAL VGA AUDIO SWITCHER S MANUAL Milestone s VGA Audio Switcher is a unit whereby multiple (2/4/8/16) VGA + Audio can be switched to two (2) or multiple (simultaneous) VGA + Audio output. The switchers are

More information

CI-218 / CI-303 / CI430

CI-218 / CI-303 / CI430 CI-218 / CI-303 / CI430 Network Camera User Manual English AREC Inc. All Rights Reserved 2017. l www.arec.com All information contained in this document is Proprietary Table of Contents 1. Overview 1.1

More information

Scan Converter Quick Installation Guide

Scan Converter Quick Installation Guide Scan Converter Quick Installation Guide Software Note: No software is required to use your scan converter. Please complete the hardware installation and system setup before you determine the need to the

More information

Quick Operation Guide of LTN7700/7600 Series NVR

Quick Operation Guide of LTN7700/7600 Series NVR Quick Operation Guide of LTN7700/7600 Series NVR UD.6L0202B0042A02 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable

More information

Telesto Private Wire Modem Manual

Telesto Private Wire Modem Manual Telesto Private Wire Modem Manual Telesto Private Wire Modem Manual Revision History Filenames are: G:\Company\Manuals &graphics\manuals \ReferenceManual\Components\Telesto_modem\Private Wire\Remote\RevA\CompleteManual\TelestoPwModemCover.lwp

More information

Evaluation Board for CS4954/55

Evaluation Board for CS4954/55 Evaluation Board for CS4954/55 Features l Demonstrates recommended layout and grounding practices l Supports both parallel and serial digital video input l On-board test pattern generation l Supports NTSC/PAL

More information

Installation Guide AT-HDR-EX-70-2PS

Installation Guide AT-HDR-EX-70-2PS 4K HDR HDMI Over TX/RX Kit The Atlona is an transmitter/receiver kit for high dynamic range (HDR) formats. The kit is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as

More information

User s Manual. Network Board. Model No. WJ-HDB502

User s Manual. Network Board. Model No. WJ-HDB502 Network Board User s Manual Model No. WJ-HDB502 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. CONTENTS Introduction...

More information

Manual Version Ver 1.0

Manual Version Ver 1.0 The BG-3 & The BG-7 Multiple Test Pattern Generator with Field Programmable ID Option Manual Version Ver 1.0 BURST ELECTRONICS INC CORRALES, NM 87048 USA (505) 898-1455 VOICE (505) 890-8926 Tech Support

More information

Model: UHD41-ARC. Installation Guide

Model: UHD41-ARC. Installation Guide Model: UHD41-ARC Installation Guide 1 Safety Information: Electrical safety Use only the power supplies and the AC power cord that were included with your product. Use of other power supplies could damage

More information

DM-TX-201-C DigitalMedia 8G+ Transmitter. Supplemental Guide Crestron Electronics, Inc.

DM-TX-201-C DigitalMedia 8G+ Transmitter. Supplemental Guide Crestron Electronics, Inc. DM-TX-201-C DigitalMedia 8G+ Transmitter Supplemental Guide Crestron Electronics, Inc. The product warranty can be found at www.crestron.com/warranty. The specific patents that cover Crestron products

More information

Extra long-range RFID (proximity) card reader

Extra long-range RFID (proximity) card reader GP90A Extra long-range RFID (proximity) card reader (1) Features: Extra long reading range of up to 90 cm with ISO-size passive RFID cards*, over 100 cm with special optimized passive cards High-precision

More information

KRS-V7A Programming Software for the Kenwood TM-V7A

KRS-V7A Programming Software for the Kenwood TM-V7A for the Kenwood TM-V7A Memory Types VHF Memories UHF Memories VHF Limit Memories UHF Limit Memories VFO Call Channel Memory Channel Functions Name Skip The KRS-V7A Programmer is designed to give you the

More information

Copyright 2013 ACURA Global. UHF860 RFID READER. User s manual. English draft TM970180

Copyright 2013 ACURA Global. UHF860 RFID READER. User s manual. English draft TM970180 Copyright 03 ACURA Global. UHF860 RFID READER User s manual English draft TM97080 April 0, 03 Copyright 03: without a written approval from ACURA Global Inc, this document is not allowed to be duplicated

More information

AC334A. VGA-Video Ultimate BLACK BOX Remote Control. Back Panel View. Side View MOUSE DC IN BLACK BOX ZOOM/FREEZE POWER

AC334A. VGA-Video Ultimate BLACK BOX Remote Control. Back Panel View. Side View MOUSE DC IN BLACK BOX ZOOM/FREEZE POWER AC334A BLACK BOX 724-746-5500 VGA-Video Ultimate BLACK BOX 724-746-5500 Zoom Position PAL ZOOM/FREEZE POWER FREEZE ZOOM NTSC/PAL SIZE RESET POWER Size Power Remote Control DC IN MOUSE MIC IN AUDIO OUT

More information

DiD. LCD Video Monitor & Video Wall Universal User Manual. Digital Information Display

DiD. LCD Video Monitor & Video Wall Universal User Manual. Digital Information Display LCD Video Monitor & Video Wall Universal User Manual DiD Digital Information Display Video Monitor Models M82S1/M70S1/M65S1/M55S1/M46S1/M40S1/M32S1/M24S1/M19S2/M19S1 Video Wall Models PD55N3/PD46N4/PD46N3/PD46N2/PD40N2

More information

EC456 Power System Protection Lab #1 Overcurrent Protection Relay

EC456 Power System Protection Lab #1 Overcurrent Protection Relay EC456 Power System Protection Lab #1 Overcurrent Protection Relay Learning Objectives: Understand the building blocks of a numerical protection relay Understand the HMI of the relay. Establish communication

More information

Analog HD video over fiber converters for smart HD CCTV

Analog HD video over fiber converters for smart HD CCTV Our AHD Video over Fiber Converters can simultaneously transmit 1-16 channels AHD over one multimode or single-mode optical fiber. Electronic and optical adjustments are never required. LED indicators

More information

FOM-1090 FOM-1090 FOM FOM-1090 w/ DB-25 Female FOM-1091 w/ DB-25 Male

FOM-1090 FOM-1090 FOM FOM-1090 w/ DB-25 Female FOM-1091 w/ DB-25 Male Serial Data Communications Synchronous, Asynchronous or Isochronous Signal rates: DC to 20 MHz FOM-1090 w/ DB-25 Female FOM-1091 w/ DB-25 Male Supported Interface Standards TIA-530, TIA-530A TIA-232 TIA-574

More information

MSP 200PRO Quick Start

MSP 200PRO Quick Start MSP 200PRO Quick Start Touch Screen control Output a range of signal types Set and select from a range of common output formats Audio output test included Genlock Y&HS outputs Input live signals for preview

More information

The DataView PowerPad III Control Panel

The DataView PowerPad III Control Panel Setting Up a Recording Session in the DataView PowerPad III Control Panel By Mike Van Dunk The DataView PowerPad III Control Panel is designed for working with AEMC PowerPad III Power Quality Analyzers,

More information

MCR3 POWER EQUIPMENT. Microprocessor Controlled Constant Current Regulator. Compliance with Standards. Uses. Features

MCR3 POWER EQUIPMENT. Microprocessor Controlled Constant Current Regulator. Compliance with Standards. Uses. Features Microprocessor Controlled Constant Current Regulator Compliance with Standards FAA: ICAO: IEC: 61822 CENELEC: AC 150/5345-10 (current edition), L-828, L-829. Aerodrome Design Manual Part 5, para. 3.2 (current

More information

Matrix Switcher. Users Guide ANI-VGA ANI-V ANI-RGB

Matrix Switcher. Users Guide ANI-VGA ANI-V ANI-RGB Matrix Switcher Users Guide ANI-VGA ANI-V ANI-RGB Document version: 052012 For use of the device and safety of users, please follow the instructions when installing, using and maintaining: The system must

More information

Vorne Industries. 87/719 Analog Input Module User's Manual Industrial Drive Itasca, IL (630) Telefax (630)

Vorne Industries. 87/719 Analog Input Module User's Manual Industrial Drive Itasca, IL (630) Telefax (630) Vorne Industries 87/719 Analog Input Module User's Manual 1445 Industrial Drive Itasca, IL 60143-1849 (630) 875-3600 Telefax (630) 875-3609 . 3 Chapter 1 Introduction... 1.1 Accessing Wiring Connections

More information

Specifications. Independent Controller MCTRL R5. Rev1.0.0 NS

Specifications. Independent Controller MCTRL R5. Rev1.0.0 NS Specifications Independent Controller MCTRL R5 Rev1.0.0 NS1601000126 Overview MCTRL R5 is an independent master controller developed by NovaStar with an epoch-making significance. The loading capacity

More information

LONWORKS Fibre Optic Converter

LONWORKS Fibre Optic Converter LONWORKS Fiber Optic Converter LRW-102 and LRW-102/PP LONWORKS to fibre optic link, multidrop and redundant ring applications The LRW-102 is a fibre optic modem designed for multidrop and redundant ring

More information

R4 AIS Class B Transponder

R4 AIS Class B Transponder Saab TransponderTech R4 AIS Class B Transponder Configuration Manual GENERAL Page 1 i Copyright The entire contents of this manual and its appendices, including any future updates and modifications, shall

More information

IRIG-B PTP Clock Converter Output Module Hardware Installation Manual

IRIG-B PTP Clock Converter Output Module Hardware Installation Manual IRIG-B PTP Clock Converter Output Module Hardware Installation Manual Kyland Technology Co., LTD. Publication Date: May 2012 Version: V1.2 Customer Service Hotline: (+8610) 88796676 FAX: (+8610) 88796678

More information

VideoMate U3 Digital Terrestrial USB 2.0 TV Box Start Up Guide

VideoMate U3 Digital Terrestrial USB 2.0 TV Box Start Up Guide VideoMate U3 Digital Terrestrial USB 2.0 TV Box Start Up Guide Compro Technology, Inc. www.comprousa.com Copyright 2001-2005. Compro Technology, Inc. No part of this document may be copied or reproduced

More information

TV Character Generator

TV Character Generator TV Character Generator TV CHARACTER GENERATOR There are many ways to show the results of a microcontroller process in a visual manner, ranging from very simple and cheap, such as lighting an LED, to much

More information

Kramer Electronics, Ltd. USER MANUAL. Model: VS x 1 Sequential Video Audio Switcher

Kramer Electronics, Ltd. USER MANUAL. Model: VS x 1 Sequential Video Audio Switcher Kramer Electronics, Ltd. USER MANUAL Model: VS-120 20 x 1 Sequential Video Audio Switcher Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 2 3 Overview 3 4 Installing the VS-120 in

More information

EGE-UHD-EXTIP-KVM. HDMI / VGA over IP Extender with scaler and KVM functions

EGE-UHD-EXTIP-KVM. HDMI / VGA over IP Extender with scaler and KVM functions DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Geratech assumes no responsibility for any infringements of patents or other rights of third parties

More information

Standard RS232 RS ma

Standard RS232 RS ma 1 / 5 CONTROL AND VISUALIZATION OF AC CURRENT IN SINGLE PHASE LINES BY EXTERNAL SHUNT Function Operating mode Current control Frequency control DC component control Shunt Timer Resolution Current precision

More information

Features/Specifications

Features/Specifications Introduction Thank you for purchasing the DD Audio DSI-1(Digital Signal Integrator). The DSI-1 is a feature rich audio signal processor that will allow you to precisely tune the acoustics of your car audio

More information

B. The specified product shall be manufactured by a firm whose quality system is in compliance with the I.S./ISO 9001/EN 29001, QUALITY SYSTEM.

B. The specified product shall be manufactured by a firm whose quality system is in compliance with the I.S./ISO 9001/EN 29001, QUALITY SYSTEM. VideoJet 8000 8-Channel, MPEG-2 Encoder ARCHITECTURAL AND ENGINEERING SPECIFICATION Section 282313 Closed Circuit Video Surveillance Systems PART 2 PRODUCTS 2.01 MANUFACTURER A. Bosch Security Systems

More information

Digital Video Wall Control Box

Digital Video Wall Control Box Digital Video Wall Control Box (with RS232 & VGA/HDMI upscale) - ID# 902 Operation Manual Introduction The Multi-Screen Video Wall Control System is ideal for advertising, entertainment and information

More information

Analyzing and Saving a Signal

Analyzing and Saving a Signal Analyzing and Saving a Signal Approximate Time You can complete this exercise in approximately 45 minutes. Background LabVIEW includes a set of Express VIs that help you analyze signals. This chapter teaches

More information

EL-41AT. 4 in, 1 out v1.3 HDMI Switcher with Independent Audio OPERATION MANUAL

EL-41AT. 4 in, 1 out v1.3 HDMI Switcher with Independent Audio OPERATION MANUAL EL-41AT 4 in, 1 out v1.3 HDMI Switcher with Independent Audio OPERATION MANUAL Table of Contents 1. Introduction 1 2. Features 1 3. Package Contents 1 4. Operation Controls and Functions 2 4.1 Front Panel

More information

Transmitter Interface Program

Transmitter Interface Program Transmitter Interface Program Operational Manual Version 3.0.4 1 Overview The transmitter interface software allows you to adjust configuration settings of your Max solid state transmitters. The following

More information

IV 251. Signal Converter SSI Analogue and SSI Serial. Operating Instructions. control motion interface

IV 251. Signal Converter SSI Analogue and SSI Serial. Operating Instructions. control motion interface control motion interface IV 251 Signal Converter SSI Analogue and SSI Serial Suitable for operation with all sensors and encoders using SSI interface Scalable analogue outputs +/- 10 volts, 0-20 ma and

More information

Generator protection relay

Generator protection relay Page 1 Issued: April 1999 Status: New Data subject to change without notice Features Off-the-shelf generator protection relay for small and medium sized power generators Three-phase time overcurrent and

More information

C-MAX. TSG200 Time signal generator TSG200. Time Signal Generator. Manual TSG200. RF Technology Specialist. Version. Revision. SPEC No.

C-MAX. TSG200 Time signal generator TSG200. Time Signal Generator. Manual TSG200. RF Technology Specialist. Version. Revision. SPEC No. Manual Time signal generator RF Technology Specialist Time Signal Generator A6 1 of 24 Manual The allows to transmit the time signal in any location. This feature opens a wide range of usage for the, e.g.

More information

V1602 / V1602CP. ANALOGUE VIDEO ROUTER - 16x2. Rev. 6

V1602 / V1602CP. ANALOGUE VIDEO ROUTER - 16x2. Rev. 6 V1602 / V1602CP ANALOGUE VIDEO ROUTER - 16x2 Rev. 6 June 10, 2004 Network Electronics ASA Thorøya P.O. Box 1020 Sandefjord, Norway Phone: +47 33 48 99 99 Fax: +47 33 48 99 98 e-mail: support@network-electronics.com

More information

Optiflex Interactive Video System

Optiflex Interactive Video System Optiflex Interactive Video System Optiflex Interactive Video System 1 Before You Start...............2 On-site Video Surveillance.......6 Touchscreen Interface Viewing...10 Secure Remote Look-in........16

More information

MIDI2DMX PRO. solid state MIDI to DMX converter. wwww.midi2dmx.eu

MIDI2DMX PRO. solid state MIDI to DMX converter. wwww.midi2dmx.eu MIDI2DM PRO solid state MIDI to DM converter wwww.midi2dmx.eu May 2011 From the authors Artistic and stage activity is like others aspects of our life - competition on the market is everywhere. On the

More information

Kramer Electronics, Ltd. USER MANUAL. Model: VA Multistandard Logo Generator

Kramer Electronics, Ltd. USER MANUAL. Model: VA Multistandard Logo Generator Kramer Electronics, Ltd. USER MANUAL Model: VA-2002 Multistandard Logo Generator Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 1 3 Overview 3 4 Your VA-2002 Multistandard Logo

More information

MaxView Cinema Kit Quick Install Guide

MaxView Cinema Kit Quick Install Guide SYSTEM SETUP The MaxView will work at any of the following display settings: INSTALLATION MaxView Cinema Kit Quick Install Guide Step 1 - Turn off your computer. Disconnect your monitor s VGA cable from

More information

Dragon. manual version 1.6

Dragon. manual version 1.6 Dragon manual version 1.6 Contents DRAGON TOP PANEL... 2 DRAGON STARTUP... 2 DRAGON STARTUP SCREEN... 2 DRAGON INFO SCREEN... 3 DRAGON MAIN SCREEN... 3 TURNING ON A TRANSMITTER... 4 CHANGING MAIN SCREEN

More information

VNS2200 Amplifier & Controller Installation Guide

VNS2200 Amplifier & Controller Installation Guide VNS2200 Amplifier & Controller Installation Guide VNS2200 Amplifier & Controller Installation 1. Determine the installation location for the VNS2200 device. Consider the following when determining the

More information

AC335A. VGA-Video Ultimate Plus BLACK BOX Back Panel View. Remote Control. Side View MOUSE DC IN OVERLAY

AC335A. VGA-Video Ultimate Plus BLACK BOX Back Panel View. Remote Control. Side View MOUSE DC IN OVERLAY AC335A BLACK BOX 724-746-5500 VGA-Video Ultimate Plus Position OVERLAY MIX POWER FREEZE ZOOM NTSC/PAL SIZE GENLOCK POWER DC IN MOUSE MIC IN AUDIO OUT VGA IN/OUT (MAC) Remote Control Back Panel View RGB

More information

CH-1602TX & CH-1602RX HDMI/Audio over CAT5e/6/7 Extender with 48V PoE

CH-1602TX & CH-1602RX HDMI/Audio over CAT5e/6/7 Extender with 48V PoE CH-1602TX & CH-1602RX HDMI/Audio over CAT5e/6/7 Extender with 48V PoE Operation Manual DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology

More information

FOUR CHANNEL USB RECORDER PCRU01. User manual. Table of Contents

FOUR CHANNEL USB RECORDER PCRU01. User manual. Table of Contents FOUR CHANNEL USB RECORDER PCRU01 User manual Table of Contents Features 2 Specifications 2 hardware 2 software: 2 system requirements 2 Software installation 2 SAFETY and WARNINGS 3 Warranty 3 Connections

More information

M-CT6 Camera-Top Monitor

M-CT6 Camera-Top Monitor M-CT6 Camera-Top Monitor Owner s Manual 1 Thank you for purchasing a Marshall M-CT6 camera-top monitor. The M-CT6 is a great tool for focusing, composing, and viewing images/video clips directly from your

More information

SDI-MP1010-GM-60P-M-RA 3G/HD-SDI Output Video Transceiver. SDI-MP1010-GM-60P-M-RA Features. Block Diagram SDI-MP1010-GM-60P-M-RA.

SDI-MP1010-GM-60P-M-RA 3G/HD-SDI Output Video Transceiver. SDI-MP1010-GM-60P-M-RA Features. Block Diagram SDI-MP1010-GM-60P-M-RA. This is a family of small form factor modules for formatting and converting generic digital video streams to standard compliant formats. Different interface standards are supported from the transmitter

More information

VGA AUDIO AUDIO MATRIX SWITCHER S MANUAL

VGA AUDIO AUDIO MATRIX SWITCHER S MANUAL VGA AUDIO AUDIO MATRIX SWITCHER S MANUAL Milestone s VGA AUDIO AUDIO MATRIX Switcher is a unit whereby multiple (2/4/8) VGA AUDIO AUDIO input can be switched to two (2) or multiple (simultaneous) VGA AUDIO

More information

HDS-42AVR HDMI Switcher INSTALLATION MANUAL

HDS-42AVR HDMI Switcher INSTALLATION MANUAL HDS-42AVR HDMI Switcher INSTALLATION MANUAL -42AVR-Manual.indd 1 Table Of Contents Introduction...3 Safety Information...4 Kit Contents...4 Feature Set...4 HDS-42AVR Remote Control/Operation...5 Specifications...6

More information

PQ-Box 100 Quick Start Instructions

PQ-Box 100 Quick Start Instructions PQ-Box 100 Quick Start Instructions These instructions are provided for the purpose on providing a quick start to PQ-Box 100 installation and operation. Please refer to the user handbook for full details.

More information

Introduction...2. Features...2 Safety Precautions...2. Installation...4

Introduction...2. Features...2 Safety Precautions...2. Installation...4 PE1900 Contents Introduction...2 Features...2 Safety Precautions...2 Installation...4 Unpacking the Display...4 Locations and Functions of Controls...4 Connections...5 Using Your Display...7 Turning the

More information

APPLICATION NOTE VACUUM FLUORESCENT DISPLAY MODULE

APPLICATION NOTE VACUUM FLUORESCENT DISPLAY MODULE AN-E-3190 APPLICATION NOTE VACUUM FLUORESCENT DISPLAY MODULE GRAPHIC DISPLAY MODULE GP1058A02A GENERAL DESCRIPTION FUTABA GP1058A02A is a graphic display module using a FUTABA 336 24 VFD. Consisting of

More information

ALM-6813/6812 INSTALLATION AND PROGRAMMING MANUAL

ALM-6813/6812 INSTALLATION AND PROGRAMMING MANUAL ALM-6813/6812 INSTALLATION AND PROGRAMMING MANUAL Installation and programming Manual v2.2 1 MARSS Solar Defender SYSTEM This guidebook provides the essential instructions to install and configure the

More information

IP Roombox. Hotel Room Management

IP Roombox. Hotel Room Management Hotel Room Management Hotel solutions Versatile room management system You need a simple solution which allows you to control all the hotel room electrical applications? Hager offers you a unique combination

More information

How-to Note: Quickstart: ITM9000 [This note applies to ITM9000 (handheld tester)] Contents. Overview. Materials Included

How-to Note: Quickstart: ITM9000 [This note applies to ITM9000 (handheld tester)] Contents. Overview. Materials Included How-to Note: Quickstart: ITM9000 [This note applies to ITM9000 (handheld tester)] Contents Overview... 1 Materials Included... 1 Getting Started... 2 Main Operations... 4 Reference / Additional Notes...

More information

PHOX TM. Camera Link Fiber Extender. Base Configuration KEY FEATURE APPLICATIONS PHOX-BM PHOX-BL-10/20/40/50

PHOX TM. Camera Link Fiber Extender. Base Configuration KEY FEATURE APPLICATIONS PHOX-BM PHOX-BL-10/20/40/50 PHOX TM KEY FEATURE Fully supports base Camera Link TM cameras/frame grabbers Provides 2Gb/s transport bandwidth up to 24 bits and 66 MHz pixel clock (85MHz optional) Zero loss and transparent transport

More information

SingMai Electronics SM06. Advanced Composite Video Interface: HD-SDI to acvi converter module. User Manual. Revision 0.

SingMai Electronics SM06. Advanced Composite Video Interface: HD-SDI to acvi converter module. User Manual. Revision 0. SM06 Advanced Composite Video Interface: HD-SDI to acvi converter module User Manual Revision 0.4 1 st May 2017 Page 1 of 26 Revision History Date Revisions Version 17-07-2016 First Draft. 0.1 28-08-2016

More information

Intelligent Security and Fire Ltd

Intelligent Security and Fire Ltd User Manual Product ranges covered by this manual Vi-P14 Vi-P14A Document Reference Date Firmware Vi-Q4C1 Viq601a.doc 26/11/2009 From Viq001a21 Videoswitch Telephone 01252-851510 Ocean House, Redfields

More information

ivw-fd122 Video Wall Controller MODEL: ivw-fd122 Video Wall Controller Supports 2 x 2 Video Wall Array User Manual Page i Rev. 1.

ivw-fd122 Video Wall Controller MODEL: ivw-fd122 Video Wall Controller Supports 2 x 2 Video Wall Array User Manual Page i Rev. 1. MODEL: ivw-fd122 Video Wall Controller Supports 2 x 2 Video Wall Array User Manual Rev. 1.01 Page i Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice

More information

SingMai Electronics SM06. Advanced Composite Video Interface: DVI/HD-SDI to acvi converter module. User Manual. Revision th December 2016

SingMai Electronics SM06. Advanced Composite Video Interface: DVI/HD-SDI to acvi converter module. User Manual. Revision th December 2016 SM06 Advanced Composite Video Interface: DVI/HD-SDI to acvi converter module User Manual Revision 0.3 30 th December 2016 Page 1 of 23 Revision History Date Revisions Version 17-07-2016 First Draft. 0.1

More information

HDMI over Optical Fibre Transmitter & Receiver Kit # 15354

HDMI over Optical Fibre Transmitter & Receiver Kit # 15354 HDMI over Optical Fibre Transmitter & Receiver Kit # 15354 Operation Manual Introduction With HDMI becoming more and more popular around the world, many consumers have been searching for a way to transmit

More information

Manual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.

Manual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual. Manual Title: 744 Users Supplement Issue: 6 Part Number: 691287 Issue Date: 4/06 Print Date: September 1998 Page Count: 8 Revision/Date: 1, 2/99 This supplement contains information necessary to ensure

More information

SR-D8-M, SR-D8-S. (Ver ) SOFTWARE INSTRUCTIONS

SR-D8-M, SR-D8-S. (Ver ) SOFTWARE INSTRUCTIONS SOFTWARE INSTRUCTIONS active l ine array speak er SYStems SR-D8-M, SR-D8-S (Ver. 1.1.1) Thank you for purchasing TOA's Active Line Array Speaker Systems. Please carefully follow the instructions in this

More information

Troubleshooting. 1. Symptom: Status indicator (Red LED) on SSR is constant on. 2. Symptom: Output indicator (Yellow LED) on SSR is flashing.

Troubleshooting. 1. Symptom: Status indicator (Red LED) on SSR is constant on. 2. Symptom: Output indicator (Yellow LED) on SSR is flashing. Product Data Electrical Data SST (Transmitter) SSR (Receiver) Supply voltage 18 30 V dc Max. Voltage ripple 15 % (within supply range) Current consumption 100 ma (RMS) 75 ma Digital - 100 ma Max. outputs

More information

OPTICAL MEASURING INSTRUMENTS. MS9710C 600 to 1750 nm OPTICAL SPECTRUM ANALYZER GPIB. High Performance for DWDM Optical Communications

OPTICAL MEASURING INSTRUMENTS. MS9710C 600 to 1750 nm OPTICAL SPECTRUM ANALYZER GPIB. High Performance for DWDM Optical Communications OPTICAL SPECTRUM ANALYZER 600 to 750 nm GPIB High Performance for DWDM Optical Communications The is a diffraction-grating spectrum analyzer for analyzing optical spectra in the 600 to 750 nm wavelength

More information

Concise NFC Demo Guide using R&S Test Equipment Application Note

Concise NFC Demo Guide using R&S Test Equipment Application Note Concise NFC Demo Guide using R&S Test Equipment Application Note Products: R&S SMBV100A R&S SMBV-K89 R&S FS-K112PC R&S RTO R&S RTO-K11 R&S CSNFC-B8 R&S FSL R&S FSV R&S FSW R&S ZVL This concise NFC Demo

More information

XG-PH80W-N XG-PH80X-N SETUP MANUAL DATA PROJECTOR MODEL

XG-PH80W-N XG-PH80X-N SETUP MANUAL DATA PROJECTOR MODEL DATA PROJECTOR MODEL XG-PH80W-N XG-PH80X-N SETUP MANUAL Setting up the Screen...2 Screen Size and Projection Distance...3 Connecting Pin Assignments...14 RS-232C Specifications and Commands...16 Setting

More information

10MHz Source/Inserter

10MHz Source/Inserter Instruction Manual Model 2099-218 10MHz Source/Inserter Redundant 18V January 2011, Rev. A RX 0.32 A TX 0.86 A REF ON REF OFF MENU MODEL 2099 SOURCE/INSERTER CROSS TECHNOLOGIES INC. PS1 PS2 REMOTE ALARM

More information

D-901 PC SOFTWARE Version 3

D-901 PC SOFTWARE Version 3 INSTRUCTION MANUAL D-901 PC SOFTWARE Version 3 Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for future reference.

More information

4 x 4 VGA Matrix Switch

4 x 4 VGA Matrix Switch Hall Research Technologies, Inc. 4 x 4 VGA Matrix Switch Model VSM-404 User s Manual With Serial Keypad CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 800-959-6439 FREE technical support, Call

More information

VNS2210 Amplifier & Controller Installation Guide

VNS2210 Amplifier & Controller Installation Guide VNS2210 Amplifier & Controller Installation Guide VNS2210 Amplifier & Controller Installation 1. Determine the installation location for the VNS2210 device. Consider the following when determining the

More information

PC/HDTV to Video Scan Converter Operations Manual

PC/HDTV to Video Scan Converter Operations Manual PC/HDTV to Video Scan Converter Operations Manual Introduction This unit is a high performance and multi-format video scan converter. It is designed to convert not only PC but also HDTV images to interlace

More information

0.56" 4 Digital Blue LED Panel Meter (rescalable) User s Guide

0.56 4 Digital Blue LED Panel Meter (rescalable) User s Guide 0.56" 4 Digital Blue LED Panel Meter (rescalable) User s Guide 2004-2009 Sure Electronics Inc. ME-SP037B_Ver1.0 0.56" 4 DIGITAL BLUE LED PANEL METER (RESCALABLE) USER S GUIDE Table of Contents Chapter

More information

Computer - Digital Output - Modem - Analog - RJ 11 Output Jack

Computer - Digital Output - Modem - Analog - RJ 11 Output Jack MODEM Converting Digital to Analog and Analog to Digital Computer - Digital Output - Modem - Analog - RJ 11 Output Jack SCTE VA 2.1 In the Beginning Limited Market Controlled Environment Specialists to

More information

Effective Test Procedures for Installing and Maintaining RF Transmitter Sites

Effective Test Procedures for Installing and Maintaining RF Transmitter Sites Product: Hand Held Spectrum Analyzer R&S FSH3 Effective Test Procedures for Installing and Maintaining RF Transmitter Sites This application note describes an effective method for generating test setups,

More information

Kramer Electronics, Ltd. USER MANUAL. Model: FC Analog Video to SDI Converter

Kramer Electronics, Ltd. USER MANUAL. Model: FC Analog Video to SDI Converter Kramer Electronics, Ltd. USER MANUAL Model: FC-7501 Analog Video to SDI Converter Contents Contents 1 Introduction 1 2 Getting Started 1 3 Overview 2 4 Your Analog Video to SDI Converter 3 5 Using Your

More information

BecauseRFL andhubbel haveapolicyofcontinuousproductimprovement,wereservetherighttochangedesignsandspecificationswithoutnotice.

BecauseRFL andhubbel haveapolicyofcontinuousproductimprovement,wereservetherighttochangedesignsandspecificationswithoutnotice. 1. Introduction 1.1 Overview The RFL VS800 CODEC enables high quality video transmission combined with voice and data over E1 (2.048Mbit/s), T1 (1.55Mbit/s) or Ethernet links. This provides an alternative

More information