PRODUCT CATALOGUE VOLUME 2

Size: px
Start display at page:

Download "PRODUCT CATALOGUE VOLUME 2"

Transcription

1 PRODUCT CATALOGUE VOLUME 2

2 Contents Page Brief Fibre Optic Overview Indoor/Outdoor Riser Cable Underground Loose Tube PE/Nylon Cables Sacrificial Sheath LT PE/Nylon/PE Cables CST Armoured LT PE/CST/PE/Nylon Cables Steel Wire Armoured LT PE/SWA/PE Nylon Cable ADSS Aerial Cable Plastic Optic Fibre Patchleads and Pigtails Pre-terminated Fibre Cables Pre-terminated Copper Cables Cat5e/6/6a Deployable Reels Mode Conditioning Leads Connectors Pre-Polished FibreCat Connectors Plastic Optic Fibre Connectors Thru-Adaptors Attenuators RU Enclosure Kit Sliding Enclosure Fixed Rack Mount Enclosure RU Static Sliding Enclosure RU High Density Pivot Panel Small Wall Mount Enclosures Hinged Wall Mount Enclosures Flat Coupler Panel Kits Flat Coupler Panels Angled Coupler Panels Defence Wall Box Belden MIPP Patch Panel Mini DIN Rail Mounted Enclosure IP Distribution Wall Boxes IP66 EDC Wall Boxes Underground Dome Enclosures /100 Media Converter Gigabit Media Converter Multimode to Single Mode Media Converter Cleaning Kits Consumables One-Click Cleaner Warning Tape Warning Flexi Post Fan-Out Kits Tooling Epoxy Fibre Optic Tool Kit Fusion Splicers Precision Cleavers Large Splice Cassette Cam Splice Fibre Microscope Pocket Visible Fault Locator FIP-400B Fully Automated Fibre Inspection Probe SmartFibre Pro Power Meter FLS-600 Light Source & FPM-600 Power Meter MaxTester 715B OTDR FTB-1 Platform FTB-200 OTDR Compact Platform Launch Leads Measuring Optical Loss Fibre Optic Core Inspection Fibre Optic Distance Guide Glossary of Terms

3 Brief Fibre Optic Overview FIBRE OPTIC OVERVIEW An optical fibre is a glass or plastic fibre that carries light along its length. Optical fibres are widely used in fibre optic ommunication, which permits transmission over longer distances and at higher data rates than other forms of communications. Fibres are used instead of metal wires as signals travel along them faster with less loss. ADVANTAGE OVER COPPER Fibre optic cables have many advantages that cannot be matched via copper or wireless transmission. First - optical fibre can transport more information to much longer distances in less transmission time. This is because fibre has less attenuation (loss) and more bandwidth (capacity). Aside from distance and speed, optical transmission cannot be affected by electromagnetic interferences, making it handy to use in environments where this is a problem. Fibre is also relatively secure since the optical transmission cannot be tapped as easily as electrical transmission. Speed: Fibre optic networks operate at high speeds - up into the gigabits. Bandwidth: Large carrying capacity. Distance: Signals can be transmitted further without needing to be refreshed or strengthened. Resistance: Greater resistance to electromagnetic interferences such as radios, motors or other nearby cables. Maintenance: Fibre optic cables costs much less to maintain. Higher carrying capacity: Because optical fibres are thinner than copper wires, more fibres can be bundled into a given-diameter cable than copper wires. Non-flammable: Because no electricity is passed through optical fibres, there is no fire hazard. SINGLEMODE Singlemode cable has a typical core diameter of 8.3 to 10um, through which only one mode will propagate typically at 1310 or 1550nm. Carries higher bandwidth than multimode fibre, but requires a light source with a narrow spectral width. Singlemode fibre has a much smaller core than multimode. The small core and single lightwave virtually eliminate any distortion that could result from overlapping light pulses, providing the least signal attenuation and the highest transmission speeds of any fibre cable type. Single path through the fibre MULTIMODE Multimode cable has a larger core size, with common diameters of 50, 62.5um and (1mm POF). Light waves are dispersed into numerous paths, or modes, as they travel through the cable s core typically at 850 or 1300nm. However, in long cable runs (greater than 3000 feet, meters), multiple paths of light can cause signal distortion at the receiving end, resulting in an unclear and incomplete data transmission so designers now call for single mode fibre in new applications using Gigabit and beyond. Multiple paths through the fibre FIBRE OPTIC CABLE SPECIFICATIONS Core Diameter Cladding Diameter (um) Numerical Aperture (um) Attenuation (db/km) 850nm Attenuation (db/km) 1300nm Attenuation (db/km) 1310nm Attenuation (db/km) 1550nm Bandwidth (MHz/Km) 850nm N/A Bandwidth (db/km) 1300nm N/A Primary Coating Layer (um) / / / /900 INDUSTRY STANDRD COLOUR CODES Fibre optic cables are terminated using an industry standard colour code. For cables that consist of more than 12 strands of fibre the colours are repeated with some variation eg. the 1st group of 12 strands are solid colours and the 2nd 1.Blue 2.Orange 3.Green 4.Brown 5.Slate 6.White 7.Red 8.Black 9.Yellow 10.Violet 11.Pink 12.Aqua group are solid colours with a stripe or some other identifying mark. 3

4 Indoor/Outdoor Riser Cable PRODuCT DETAIlS: ROHS compliant multi fibre Riser cable constructed from 900um PVC tight buffer jacketed fibres, stranded together with aramid yarn and Dry-Block water-swellable aramid reinforcing and blocking yarns, typically over sheathed with black UV-resistant LSZH for indoor/outdoor versions. Sheath printing includes length marking at 1 meter intervals. Options include PVC sheath, NHFR sheath, alternative colours, any fibre type and up to 96 fibres. APPlICATION The outdoor version of this tight buffer riser cable is the preferred selection for direct termination methods linking buildings and used as backbones. It features a dry water blocking system to prevent the flow of water along the cable in the event of sheath breech, a UVresistant LSZH jacket for exposed situations, and it can accommodate all fibre types including different types within the same cable. PVC and NHFR sheathed options are available as are alternative colours. These are ideal for duct and indoor applications. Generally NHFR and non-black materials do not have the same high level of UV resistance as the standard offerings. INDOOR OuTDOOR RISER BREAKDOWN: Tough UV-resistant LSZH Jacket Dry-Blocked Core 900um tight buffered optical fibre Aramid yarn reinforcing Physical Characteristics Fibre Count nominal Cable Diameter (mm) nominal Weight (kg/km) operating temperature (C) to +70 C (indoor/outdoor) to +60 C (indoor) tensile strength (n) max. Crush resistance (n/100mm) long term Crush (n/100mm) min. loaded bending radius (mm) min. off load bending radius (mm) Ordering information: CAB-IOR-02-MM 2 CORe INDOOR/OUTDOOR RISeR MULTIMODe OM1 CAB-IOR-02-SM 2 CORe INDOOR/OUTDOOR RISeR SINGLeMODe OS1 CAB-IOR-04-MM 4 CORe INDOOR/OUTDOOR RISeR MULTIMODe OM1 CAB-IOR-04-SM 4 CORe INDOOR/OUTDOOR RISeR SINGLeMODe OS1 CAB-IOR-06-MM 6 CORe INDOOR/OUTDOOR RISeR MULTIMODe OM1 CAB-IOR-06-MM3 6 CORe INDOOR/OUTDOOR RISeR MULTIMODe OM3 CAB-IOR-06-SM 6 CORe INDOOR/OUTDOOR RISeR SINGLeMODe OS1 CAB-IOR-08-MM 8 CORe INDOOR/OUTDOOR RISeR MULTIMODe OM1 CAB-IOR-08-SM CAB-IOR-12-MM CAB-IOR-12-MM3 CAB-IOR-12-SM CAB-IOR-24-MM CAB-IOR-24-MM3 CAB-IOR-24-SM 8 CORe IndOOR/OutdOOR RISeR SIngleMOde OS1 12 CORe IndOOR/OutdOOR RISeR MultIMOde OM1 12 CORe IndOOR/OutdOOR RISeR MultIMOde OM3 12 CORe IndOOR/OutdOOR RISeR SIngleMOde OS1 24 CORe IndOOR/OutdOOR RISeR MultIMOde OM1 24 CORe IndOOR/OutdOOR RISeR MultIMOde OM3 24 CORe IndOOR/OutdOOR RISeR SIngleMOde OS1 4

5 Underground Loose Tube The MSS Underground Loose Tube cable is designed to be easily pulled into the tight confines of a duct where flexibility and abrasion resistance are required, and can be aerially lashed or directly buried underground. LOOSE TUBE MONO TUBE Up to 24 optical fibres contained in a single, jelly filled loose tube, strengthened with flexible non-metallic strength member bonded to the inner polyethylene sheath, with an insect-resistant nylon outer jacket. Options include additional sacrificial sheath. Surface printing includes length marking at 1-metre intervals. MONO TUBE STRUCTURE BREAKDOWN Insect Resistant Nylon Jacket Polyethylene Sheath Flexible Non-metallic Strength Element Soft Thixotropic Filling Compound Optical Fibre Loose Buffer Tube Physical Characteristics Tube Diameter 3.2mm Nominal Cable Diameter 8.5mm Nominal Weight 55kg/km Temperature Range -40 to 70 C Nominal Standard Length 10km Max. Pulling Tension 2.0kN Min. Bending Radius Under load No load 20 x ODmm 10 x ODmm Max. Crush Resistance 2.0kg/1.0metre Impact 1kg/1.0metre LOOSE TUBE MULTI TUBE Up to 24 optical fibres contained in a single, jelly filled loose tube, strengthened with flexible non-metallic strength member bonded to the inner polyethylene sheath, with an insect-resistant nylon outer jacket. Options include additional sacrificial sheath. Surface printing includes length marking at 1-metre intervals. MULTI TUBE STRUCTURE BREAKDOWN Insect Resistant Nylon Jacket Polyethylene Sheath Moisture-Resistant Jelly-Filled Loose Tube Central Strength Element Optical Fibre Dry Blocked Core Physical Characteristics Nylon Sac. Sheath (option) Tube Diameter 2mm 2mm Nominal Cable Diameter 9.6mm 11.6mm Nominal Weight 70kg/km 100kg/km Temperature Range -40 to 70 C -40 to 70 C Max. Tension Installation 2.3kN 2.4kN In service 1.3kN 1.4kN Min. Bending Radius Under load No load 20 x ODmm 10 x ODmm Max. Crush Resistance 1.6kN/100mm 1.7kN/100mm : CAB-LT-04-MM 4 Core Gel-Filled Loose Tube - Multimode OM1 CAB-LT-06-MM 6 Core Gel-Filled Loose Tube - Multimode OM1 CAB-LT-06-MM3 6 Core Gel-Filled Loose Tube - Multimode OM3 CAB-LT-06-SM 6 Core Gel-Filled Loose Tube - Singlemode OS1 CAB-LT-08-MM 8 Core Gel-Filled Loose Tube - Multimode OM1 CAB-LT-12-MM 12 Core Gel-Filled Loose Tube - Multimode OM1 CAB-LT-12-MM3 12 Core Gel-Filled Loose Tube - Multimode OM3 CAB-LT-12-SM CAB-LT-24-MM CAB-LT-24-MM3 CAB-LT-24-SM CAB-LT-48-MM CAB-LT-48-SM 12 Core Gel-Filled Loose Tube - Singlemode OS1 24 Core Gel-Filled Loose Tube - Multimode OM1 24 Core Gel-Filled Loose Tube - Multimode OM3 24 Core Gel-Filled Loose Tube - Singlemode OS1 48 Core Gel-Filled Loose Tube - Multimode OM1 48 Core Gel-Filled Loose Tube - Singlemode OS1 5

6 Sacrificial Sheath Loose Tube Cable - Singlemode A Termite resistant loose tube cable featuring a sacrificial jacket, non-metallic strength member, gel filled tubes and a dry block core, for use in both direct bury and conduit/ duct applications. The Thixotropic gel filled tubes and water swellable yarns (dry core) prevent water ingress while the non-metallic glass fibre reinforced plastic central strength member maintains excellent tensile strength. This Sacrificial Sheath loose tube construction features an inner UV resistant Polyethylene (PE) sheath under a termite/insect resistant Polyamide Nylon jacket with an outer UV resistant Polyethylene (PE) sacrificial sheath. Other options include standard loose tube, Composite (MM + SM) and CST Armour. FEATURES AND BENEFITS Blue UV and Insect/Termite resistant Nylon (Polyamide) Jacket Black PE (Polyethylene) UV resistant Inner sheath Polyester based rip cords for easy sheath removal Water blocking tape and swellable yarns prevent ingress into the core Thixotropic gel filled tubes prevent water ingress into the tubes Non-metallic fibre reinforced plastic rod central strength member provides tensile strength PHYSICAL CHARACTERISTICS Number of Fibres 2 to Number of Fibres per Tube up to 12 Number of Elements Tube/Filler Diameter IDENTIFICATION 2.1mm Nominal Cable Diameter 12mm 14mm 16mm Nominal Cable Weight 115kg/km 151kg/km 208kg/km Max. Tensile Strength 2.0kN Max. Crush Resistance 1.0kN/100mm (Long Term) Min. Bending Radius 20 x cable OD Installation 10 x cable OD Long term Temperature Range Storage: -20 to 70 C Installation: 0 to 50 C Operation: -10 to 70 C Central Strength Member Waterblocking Outer Sac Sheath Outer Jacket Inner Sheath Fibre & Buffer Colour Code Chart Glass Fibre Reinforced Plastic (GRP). Non-metallic Thixotropic Gel filled tubes Water swellable elements (dry core) Material: UV stabilised Polyethylene. Colour: Black Material: UV stabilised Polyamide Nylon. Colour: Blue Material: UV stabilised Polyethylene. Colour: Black Fillers are either natural (opaque) or black, gel filled tubes (with no fibres) are also used. 6

7 Sacrificial Sheath Loose Tube Cable - Singlemode OPTICAL CHARACTERISTICS - SINGLEMODE LOW WATER PEAK: Compliant with the following standards: AS/NZS 3080, ISO/IEC 11801, IEC , ITU-T G652.D Optical Properties Fibre Type SM/OS2 ITU-T Standard G.652.D Mode Field Diameter Cladding Diameter Buffer Diameter Max. Attenuation of nm /- 0.7um 242 +/- 7um 0.35dB/km 0.35dB/km 0.21dB/km 0.24dB/km Black PE Outer Sheath Black Polyethylene Inner Sheath Loose Tube With Fibres & Gel Central Strength Member Core Wrapping & Strength Member WS Yarns Blue Polyamide Intermediate Sheath Ripcord(s) A Number of Cores SM/OS2 4 CAB-LT-04-SMSS 6 CAB-LT-06-SMSS 12 CAB-LT-12-SMSS 24 CAB-LT-24-SMSS 36 CAB-LT-36-SMSS 48 CAB-LT-48-SMSS 60 CAB-LT-60-SMSS 72 CAB-LT-72-SMSS 96 CAB-LT-96-SMSS 120 CAB-LT-120-SMSS 144 CAB-LT-144-SMSS 7

8 Sacrificial Sheath Loose Tube Cable - Multimode A Termite resistant loose tube cable featuring a sacrificial jacket, non-metallic strength member, gel filled tubes and a dry block core, for use in both direct bury and conduit/ duct applications. The Thixotropic gel filled tubes and water swellable yarns (dry core) prevent water ingress while the non-metallic glass fibre reinforced plastic central strength member maintains excellent tensile strength. This Sacrificial Sheath loose tube construction features an inner UV resistant Polyethylene (PE) sheath under a termite/insect resistant Polyamide Nylon jacket with an outer UV resistant Polyethylene (PE) sacrificial sheath. Other options include standard loose tube, Composite (MM + SM) and CST Armour. FEATURES AND BENEFITS Blue UV and Insect/Termite resistant Nylon (Polyamide) Jacket Black PE (Polyethylene) UV resistant Inner sheath Polyester based rip cords for easy sheath removal Water blocking tape and swellable yarns prevent ingress into the core Thixotropic gel filled tubes prevent water ingress into the tubes Non-metallic fibre reinforced plastic rod central strength member provides tensile strength PHYSICAL CHARACTERISTICS Number of Fibres 2 to Number of Fibres per Tube up to 12 Number of Elements Tube/Filler Diameter IDENTIFICATION 2.1mm Nominal Cable Diameter 12mm 14mm 16mm Nominal Cable Weight 115kg/km 151kg/km 208kg/km Max. Tensile Strength 2.0kN Max. Crush Resistance 1.0kN/100mm (Long Term) Min. Bending Radius 20 x cable OD Installation 10 x cable OD Long term Temperature Range Storage: -20 to 70 C Installation: 0 to 50 C Operation: -10 to 70 C Central Strength Member Waterblocking Outer Sac Sheath Outer Jacket Inner Sheath Fibre & Buffer Colour Code Chart Glass Fibre Reinforced Plastic (GRP). Non-metallic Thixotropic Gel filled tubes Water swellable elements (dry core) Material: UV stabilised Polyethylene. Colour: Black Material: UV stabilised Polyamide Nylon. Colour: Blue Material: UV stabilised Polyethylene. Colour: Black Fillers are either natural (opaque) or black, gel filled tubes (with no fibres) are also used. 8

9 Sacrificial Sheath Loose Tube Cable - Multimode OPTICAL CHARACTERISTICS - MULTIMODE GRADED INDEX: Compliant with the following standards: AS/NZS 3080, ISO/IEC 11801, IEC , ITU-T G Optical Properties Fibre Type OM1 OM3 OM4 ITU-T Standard N/A G651.1 Core Diameter 62.5um 50um Cladding Diameter 125um Buffer Diameter 250um Max. Attenuation of 850nm 3.2dB/km 2.7dB/km 1300nm 1.0dB/km 0.8dB/km 0.7dB/km Black PE Outer Sheath Black Polyethylene Inner Sheath Loose Tube With Fibres & Gel Central Strength Member Core Wrapping & Strength Member WS Yarns Blue Polyamide Intermediate Sheath Ripcord(s) A Number of Cores OM1 OM3 OM4 6 CAB-LT-06-MMSS CAB-LT-06-MM3SS CAB-LT-06-MM4SS 12 CAB-LT-12-MMSS CAB-LT-12-MM3SS CAB-LT-12-MM4SS 24 CAB-LT-24-MMSS CAB-LT-24-MM3SS CAB-LT-24-MM4SS 48 CAB-LT-48-MMSS CAB-LT-48-MM3SS CAB-LT-48-MM4SS 9

10 CST Armoured LT Cable PE/CST/PE/Nylon - Singlemode A Rodent & Termite resistant loose tube cable featuring Corrugated Steel Tape Armour, non-metallic strength member, gel filled tubes and a dry block core, for use in both direct bury and conduit/duct applications. The Thixotropic gel filled tubes and water swellable yarns (dry core) prevent water ingress while the non-metallic glass fibre reinforced plastic central strength member maintains excellent tensile strength. This loose tube construction features an outer termite/uv resistant Polyamide Nylon jacket and rodent resistant Corrugated Steel Tape Armour. FEATURES AND BENEFITS CST Corrugated Steel Tape Armour (rodent resistant) Blue UV and Insect/Termite Resistant Nylon (Polyamide) Jacket Black PE (Polyethylene) Inner sheath Polyester based rip cords for easy sheath removal Water blocking tape and swellable yarns prevent ingress into the core Thixotropic gel filled tubes prevent water ingress into the tubes Non-metallic fibre reinforced plastic rod central strength member provides tensile strength PHYSICAL CHARACTERISTICS Number of Fibres 2 to Number of Fibres per Tube up to 12 Number of Elements Tube/Filler Diameter IDENTIFICATION Fibre & Buffer Colour Code Chart 2.1mm Nominal Cable Diameter 14mm 15 mm 18mm Nominal Cable Weight 167kg/km 213kg/km 287kg/km Max Tensile Strength Max Crush Resistance Min Bending Radius 2.5kN 3.0kN/100mm (Long Term) 30 x cable OD Installation 15 x cable OD Long term Temperature Storage: -20 to 70 C Installation: 0 to 50 C Operation: -10 to 70 C Central Strength Member Waterblocking Outer Jacket Inner Sheath Armour Inner Sheath Glass Fibre Reinforced Plastic (GRP). Non-metallic Thixotropic Gel filled tubes Water swellable elements (dry core) Material: UV stabilised Polyamide Nylon. Colour: Blue Material: UV stabilised Polyethylene. Colour: Black Corrugated steel tape (rodent protection) Material: UV stabilised Polyethylene. Colour: Black Fillers are either natural (opaque) or black, gel filled tubes (with no fibres) are also used. 10

11 CST Armoured LT Cable PE/CST/PE/Nylon - Singlemode OPTICAL CHARACTERISTICS - SINGLEMODE LOW WATER PEAK: Compliant with the following standards: AS/NZS 3080, ISO/IEC 11801, IEC , ITU-T G652.D Optical Properties Fibre Type SM/OS2 ITU-T Standard G.652.D Mode Field Diameter Cladding Diameter Buffer Diameter Max. Attenuation of nm /- 0.7um 242 +/- 7um 0.35dB/km 0.35dB/km 0.21dB/km 0.24dB/km Number of Cores SM/OS2 6 CAB-LT-06-SMCST 12 CAB-LT-12-SMCST 24 CAB-LT-24-SMCST 48 CAB-LT-48-SMCST 60 CAB-LT-60-SMCST 72 CAB-LT-72-SMCST 96 CAB-LT-96-SMCST 120 CAB-LT-120-SMCST 144 CAB-LT-144-SMCST A 11

12 CST Armoured LT Cable PE/CST/PE/Nylon - Multimode A Rodent & Termite resistant loose tube cable featuring Corrugated Steel Tape Armour, non-metallic strength member, gel filled tubes and a dry block core, for use in both direct bury and conduit/duct applications. The Thixotropic gel filled tubes and water swellable yarns (dry core) prevent water ingress while the non-metallic glass fibre reinforced plastic central strength member maintains excellent tensile strength. This loose tube construction features an outer termite/uv resistant Polyamide Nylon jacket and rodent resistant Corrugated Steel Tape Armour. FEATURES AND BENEFITS CST Corrugated Steel Tape Armour (rodent resistant) Blue UV and Insect/Termite Resistant Nylon (Polyamide) Jacket Black PE (Polyethylene) Inner sheath Polyester based rip cords for easy sheath removal Water blocking tape and swellable yarns prevent ingress into the core Thixotropic gel filled tubes prevent water ingress into the tubes Non-metallic fibre reinforced plastic rod central strength member provides tensile strength PHYSICAL CHARACTERISTICS Number of Fibres 2 to Number of Fibres per Tube up to 12 Number of Elements Tube/Filler Diameter IDENTIFICATION Fibre & Buffer Colour Code Chart 2.1mm Nominal Cable Diameter 14mm 15 mm 18mm Nominal Cable Weight 167kg/km 213kg/km 287kg/km Max Tensile Strength Max Crush Resistance Min Bending Radius 2.5kN 3.0kN/100mm (Long Term) 30 x cable OD Installation 15 x cable OD Long term Temperature Storage: -20 to 70 C Installation: 0 to 50 C Operation: -10 to 70 C Central Strength Member Waterblocking Outer Jacket Inner Sheath Armour Inner Sheath Glass Fibre Reinforced Plastic (GRP). Non-metallic Thixotropic Gel filled tubes Water swellable elements (dry core) Material: UV stabilised Polyamide Nylon. Colour: Blue Material: UV stabilised Polyethylene. Colour: Black Corrugated steel tape (rodent protection) Material: UV stabilised Polyethylene. Colour: Black Fillers are either natural (opaque) or black, gel filled tubes (with no fibres) are also used. 12

13 A DATASHEET CST Armoured LT Cable PE/CST/PE/Nylon - Multimode OPTICAL CHARACTERISTICS - MULTIMODE GRADED INDEX: Compliant with the following standards: AS/NZS 3080, ISO/IEC 11801, IEC , ITU-T G Optical Properties Fibre Type OM1 OM3 OM4 ITU-T Standard N/A G651.1 Core Diameter 62.5um 50um Cladding Diameter 125um Buffer Diameter 250um Max. Attenuation of 850nm 3.2dB/km 2.7dB/km 1300nm 1.0dB/km 0.8dB/km 0.7dB/km Number of Cores OM1 OM3 OM4 6 CAB-LT-06-MMCST CAB-LT-06-MM3CST CAB-LT-06-MM4CST 12 CAB-LT-12-MMCST CAB-LT-12-MM3CST CAB-LT-12-MM4CST 24 CAB-LT-24-MMCST CAB-LT-24-MM3CST CAB-LT-24-MM4CST 13

14 Steel Wire Armoured LT PE/SWA/PE/Nylon Cable Steel Wire Armoured (SWA) Loose Tube Fibre PE/SWA/PE Nylon cable is ideal for heavyduty applications when high crush is required. FEATURES & BENEFITS 2x Outer UV resistant jackets: black PE and blue termite/insect resistant nylon Thixotropic gel filled tubes prevent water ingress Black inner UV resistant PE jacket SWA LOOSE TUBE FIBRE PE/SWA/PE CABLE SPECIFICATIONS Single Mode Optical Fibre ITU.T - G.652 D Maximum Cabled Fibre Attenuation db/km 1310nm: 0.35 & 1550nm: 0.22 PMDq 0.2 ps/ km Multi Mode Optical Fibre MM OM-1 Maximum Cabled Fibre Attenuation db/km 850nm: 3.0 & 1300nm: 1.5 Multi Mode Optical Fibre MM OM-3 Maximum Cabled Fibre Attenuation db/km 850nm: 3.0 & 1300nm: 1.5 Loose Tube Water Blocking Elements Thixotropic gel to prevent water ingress in loose tube Tube Thermoplastic Material Core Central Strength Member Fibre Reinforced Plastic (FRP) to Provide Tensile Strength and Anti-buckling Properties Water Blocking Elements Water Swellable Yarns are added to prevent water ingress in the core of cable Filler Thermoplastic Material Core Wrapping Binder and Water Swellable Tape Cable Rip Cord Polyester Based Yarns Inner Sheathing UV Proof Black MDPE/HDPE Moisture Barrier Water Swellable Material Armouring Steel Wire Armouring Outer Sheathing UV Proof Black MDPE/HDPE Outer Jacket UV Stablized Blue Polyamide Filler Colour Black Inner Sheath Colour Black Outer Sheath Colour Black Outer Jacket Colour Blue Cable Length (Km) 2.00 ± 5% Order Tolerance ± 5% Optical Fibre Cable Performance Mechanical Environmental Max. Tensile Strength 18kN Crush Resistance 6000N/10cm Temp. Performance Minimum Bend Radius Impact Strength 50Nm Installation -20 C to + 50 C - During Installation 20D Torsion ± 180 Service -30 C to + 70 C - After Installation 10D Storage -30 C to + 70 C Water Penetration 1m head, 3m samples, 24hrs (Inner PE) Drip Test 30cm, 70 C, 24hr Tests shall be carried out as per IEC Standards. Change in attenuations shall be < 0.1dB for SM & < 0.3dB for MM. 14

15 Steel Wire Armoured LT PE/SWA/PE/Nylon Cable Cable Construction Fibre Count Fibres Per Tube Tubes Fillers Colour of Loose Tubes In Sequence Fibre Colour Diameter of Cable (±5%) Weight of Cable (±10%) Nos. Nos. Nos. Nos. Colour Colour mm kg/km BL,F,F,F,F,F BL,OR,GR,BR,SL,WH BL,F,F,F,F,F BL,OR,F,F,F,F BL,OR,GR,BR,F,F BL,OR,GR,BR,SL,WH, RD,BK,YL,VI,PK,AQ BL,OR,GR,BR,SL,WH, RD,BK,YL,VI,PK,AQ BL,OR,GR,BR,SL,WH, RD,BK,YL,VI,PK,AQ Where: BL = Blue, OR = Orange, GR = Green, BR = Brown, SL = Grey (Slate), WH = White, RD = Red, BK = Black, YL = Yellow, VI = Violet, PK = Pink, AQ = Aqua, F = Filler : CAB-LT-06-MMSWA 6F SWA Armoured LT PE/SWA/PE/Nylon Cable OM1 CAB-LT-12-MMSWA 12F SWA Armoured LT PE/SWA/PE/NylonCable OM1 CAB-LT-24-MMSWA 24F SWA Armoured LT PE/SWA/PE/Nylon Cable OM1 CAB-LT-48-MMSWA 48F SWA Armoured LT PE/SWA/PE/Nylon Cable OM1 CAB-LT-06-MM3SWA 6F SWA Armoured LT PE/SWA/PE/Nylon Cable OM3 CAB-LT-12-MM3SWA 12F SWA Armoured LT PE/SWA/PE/Nylon Cable OM3 CAB-LT-24-MM3SWA 24F SWA Armoured LT PE/SWA/PE/Nylon Cable OM3 CAB-LT-48-MM3SWA 48F SWA Armoured LT PE/SWA/PE/NylonCable OM3 CAB-LT-06-SMSWA 6F SWA Armoured LT PE/SWA/PE/Nylon Cable SM CAB-LT-12-SMSWA 12F SWA Armoured LT PE/SWA/PE/Nylon Cable SM CAB-LT-24-SMSWA 24F SWA Armoured LT PE/SWA/PE/Nylon Cable SM CAB-LT-48-SMSWA 48F SWA Armoured LT PE/SWA/PE/Nylon Cable SM Nylon Jacket Outer Sheath Steel Wire Armouring WS Tape Loose Tube With Fibre & Gel Central Strength Member Water Swellable Yarns Black Inner Sheath Filler Ripcord(s) A 15

16 ADSS Aerial Cable The MSS ADSS Aerial Cable is designed to be freely suspended between upright supports such as poles, posts and masts. The construction is waterproof in longitudinal direction thanks to the use of jelly-filled bundle conductors and swelling tape. The outer jacket is UV-resistant and at the same time provides protection against environmental influences such as snow, ice, sun isolation and wind. The loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunicationsgrade optical fibre. ADSS is available in various span lengths and wind loads so contact MSS for further information. ADSS AERIAL BREAKDOWN Tape Filler PE Sheath Ripcord Strengthening PE Sheath Optical Fibre Loose Tube Tubing Gel Central Strength Member Physical & Mechanical Properties Cable Mass (Kg/km) Cable OD (mm) Bending Radius (mm) Crush Res (KN/100mm) Installation No Load Full Load Long Term Short Term Tensile (KN) ± Fibres Per Tube & Colours Fibre Count T1 (Blue) T2 (Orange) T3 (Green) T4 (Brown) T5 (Slate) SM 12 MM f f f Load Conditions : 170 Metre 1.5% Sag Wind Load (Km/Hr) Temp (C) ICE R/T (mm) Sag (m) Tension (KN) Vertical Plane Every Day Stress (EDS) 0 25 C Max Operating Stress (MOS) C Offered Fibre & Fibre Attenuation 9/125um SMOF 50/125um SX+ 62.5/125um MMOF 1310nm 1550nm 850nm 1300nm 850nm 1300nm Att (db/km) Att (db/km) Att (db/km) Bandwidth (MHz-km) Bandwidth (MHz-km) : CAB-ADSS-06-MM CAB-ADSS-12-MM CAB-ADSS-24-MM CAB-ADSS-06-SM CAB-ADSS-12-SM CAB-ADSS-24-SM Cable 6 Core ADSS (All Dielectric Self Supporting) Multimode OM1 Cable 12 Core ADSS (All Dielectric Self Supporting) Multimode OM1 Cable 24 Core ADSS (All Dielectric Self Supporting) Multimode OM1 Cable 6 Core ADSS (All Dielectric Self Supporting) Singlemode OS1 Cable 12 Core ADSS (All Dielectric Self Supporting) Singlemode OS1 Cable 24 Core ADSS (All Dielectric Self Supporting) Singlemode OS1 16

17 Plastic Optic Fibre POF (Plastic Optical Fibre), similar to traditional glass fibre, POF transmits light/data through the core of the fibre. However POF assemblies have a core size in some cases 100x that of glass fibre. The increased core diameter allows 96% of the core to transmit signal from point-to-point, making it an ideal material for signal transmission over short distances. POF assemblies possess special characteristics that make this product an ideal solution for applications which traditional glass fibre products are not well suited. For applications requiring a very tight bend radius, POF products generally bend to 25mm with no excessive attenuation. POF products also have a very wide tolerance for scratching and contamination from the field. This tolerance allows the product to perform at acceptable level despite some compromise in physical condition. Plastic optical fibre products are typically used in medical, automotive, home networks, digital audio/video interfaces, signs/illumination, instrumentation, and automation. FEATURES & BENEFITS Ideal for short distances Wide tolerance for scratching and contamination from the field Tight bend radius Perfect for audio applications Low manufacturing cost compared to glass fibre PLASTIC OPTIC FIBRE BREAKDOWN Round Duplex Plastic Optical Fibre Core Jacket PE Black Kevlar Outer Jacket PVC Red Duplex Outer Sheath Plastic Optical Fibre Simplex Outer Sheath Plastic Optical Fibre POF Cable Specifications Fibre Types Polymethyl Methacryate (PMMA) Core Cladding Pluorinated polymer Diameter (mm) 1.0±0.06 Attenuation at 650nm 0.2dB/m Core Jacket Diameter (mm) 2.2*4.4 Core Jacket Sheath Sheath Colour PE BLACK Outer Jacket Diameter (mm) 6.0±0.1 Outer Jacket Sheath Sheath Colour PVC *Contact MSS for colour options Numerical Aperture 0.5 Minimum Bend Radius (mm) 70 Cable Weight (kg per km) Storage, Installation, Operating Temperature 40kg -40 ~+75 C : CAB-POF-D-1MM CAB-POF-D-1MMHD Duplex Plastic Fibre Optic Cable - 1mm diameter Duplex Plastic Fibre Optic Cable - 1mm diameter 6mm outer jacket 17

18 Patchleads & Pigtails PATCHLEADS Widest range available ex-stock, including ST, SC, SCA, LC, MTRJ, in 1, 2, 3, 5, 10, 15 and 20m lengths. All connector styles, configurations and lengths can be manufactured, including special Defence colours and SM, OM1, OM2 and OM3 cable. PIGTAILS Stocking SC, ST, FC and LC in OM1 (orange) / SC, ST, FC, LC in OM3 (Aqua) SC,SCA,ST and LC in SM (Yellow). Available in 6 packs in above colours or colour-coded 6 and 12 packs. All other connector types and configurations can be manufactured with short lead-times. MTRJ FC SC SCA LC ST MU MTP/MPO : Patch Lead Pigtails Cable Type Connector A Connector B Lead Length Mode D (Duplex) ST ST *m MM (OM1-m/mode) S (Simplex) SC SC MM2 (OM2-m/mode) SCA SCA *denotes length MM3 (OM3-m/mode) FC FC Ie 1m = 1mtr length SM (OS2-s/mode) FCA LC LCA MTRJ E2000 E2000A MU MTP MTO FCA LC LCA MTRJ E2000 E2000A MU MTP MPO Lead Type Connector A Length Mode Packing P (Pigtail ST *m MM (m/mode OM1) 6 (6 pack) Patch Lead - Plastic Fibre SC MM2 (m/mode OM2) C12 (12 pack colour) SCA FC FCA LC *denotes length Ie 1m = 1mtr length MM3 (m/mode OM3) SM (m/mode OS2) Lead Type Connector A Connector B Lead Length S (Simplex) *m D (Duplex) HFBR4501Z HFBR4501Z HFBR4503 HFBR4505Z HFBR4506Z HFBR4511Z HFBR4503 HFBR4505Z HFBR4506Z HFBR4511Z *denotes length Ie 1m = 1mtr length 18

19 Pre-terminated Fibre Cables MSS Fibre Systems can manufacture a large range of Pre-Terminated Fibre Cables to suit your specific application requirements. From straight forward simplex patch cords to custom Military Spec cable. MSS has the resources and expertise to deliver a quality product with fast lead times and friendly customer service. FEATURES AND BENEFITS Fully tested and ready to be installed Can manufacture a pre-terminated cable to your specific length, colour and connector type Pulling conduit assemblies available Custom labelling Cable drum for re-deployment Tested to AS/NZS3080, ISO Performance Standards ACMA Compliant: N15531 PRE-TERMINATED CABLE ORDERING DETAILS Fibre Core Count Connector End A Parallel Connectors End B Staggered Connectors Cable Shortest Break Out Length Staggered Length Parallel & Staggered Example Diagram Break Out Length Longest Break Out Length END A 4 4 Connector Type: ST LC SC LCA SCA MTRJ FC MTP FCA Break Out Details: Staggered Parallel Break Out Length Over Sleeving 1.8mm Over Sleeving 3.0mm *See diagram above CABLE Fibre Mode: OS1 - Singlemode 9/125 OM1 - Multimode 62.5/125 OM3 - Multimode 50/125 OM4 - Multimode 50/125 Fibre Cable Type: Tight Buffered Indoor - Outdoor Loose Tube Underground Cable Microcable Where will the Cable be installed? Underground Outdoor Indoor Core Count: X 4 Length: (in metres) 4 Cable Drum: Recommended for cables over 50 metres END B 4 4 OTHER 4 4 Connector Type: ST LC SC LCA SCA MTRJ FC MTP FCA Break Out Details: Staggered Parallel Break Out Length Over Sleeving 1.8mm Over Sleeving 3.0mm *See diagram above Connector Type: Pulling Conduit Standard Flexi Protection Connector Type: End A End B 19

20 Pre-Terminated Copper Cables Cat5e/6/6a ProDuCT DETAilS: MSS Fibre Systems can manufacture a large range of Pre-Terminated Copper Cables to suit your specific application requirements. From simple patch leads to plug and play permanent link cables for quick and easy installation. MSS has the resources and expertise to deliver a quality product with short lead times and friendly customer service. features AND BENEfits Fully tested and ready to be installed Can manufacture a pre-terminated cable to your specific length, colour and connector type Pulling conduit assemblies available Custom labelling Cable drum for re-deployment Tested to AS/NZS3080, ISO Performance Standards ACMA Compliant: N15531 pre-terminated cable ordering DEtAils END A 4 RJ-45 Jack: cable 4 Category: END B 4 RJ-45 Jack: Keystone Style (Black) Cat5e UTP (unshielded) Cat5e STP (shielded) Keystone Style (Black) 4 Wallplate Style (White) (To suit Clipsal cutout) RJ-45 Plug: Includes strain relief boot 4 Termination: 4 SC SCA Cable Type: Indoor Underground/Gel Filled LCA MTRJ Outdoor/UV Industrial Ethernet 4 Wallplate Style (White) (To suit Clipsal cutout) RJ-45 Plug: Includes strain relief boot 4 Termination: 568A 568B 4 Conductor Stranded (if 20m or less) 568A 568B Solid (more than 20m) 4 Category: Black Blue Red Violet other 4 Connector Type: Pulling Conduit Green Grey White Yellow Standard Flexi Protection Pink Other 4 Cable Drum: 4 Connector Type: Yes (recommended for cables over 20 metres) End A No End B 20

21 Deployable Reels These heavy duty light weight deployable reels provide the ideal solution for running fibre optic cable for temporary connections. The latching door provides a secure area inside the drum for protection of the internal fibre optic connectors. Reels are easily transportable, come in 3 sizes offering varying cable lengths from 100 metres to 600 metres (see table below) and are manufactured from heavy duty Rubberised Plastic. MSS Fibre Systems can provide these reels loaded with the fibre cable and connectors of your choice supplied fully tested ready for deployment. DR310 DR380 DR450 A: 310mm A: 380mm A: 445mm B:170mm B: 236mm B: 296mm C: 132mm C: 182mm C: 187mm F: 263mm F: 310mm F: 345mm G: 147mm G: 231mm G: 266mm H: 367mm H: 491mm H: 555mm T: 229mm T: 291mm T: 310mm Approximate Maximum Cable Length In Metres Ø 4.5mm Ø 6mm Ø 7.5mm Version/Weight DR m 150m 100m 1.78kg DR m 300m 180m 4.35kg DR m 400m 220m 5.14kg 21

22 Mode Conditioning Leads Mode conditioning fibre optic patch cords are designed for Gigabit Ethernet multimode applications at 1300nm wavelength; the application standard is IEEE 802.3z. All mode conditioning fibre optic patch cords are made with duplex cable; with a single mode to multimode offset fibre connection part in one of the two legs. The Gigabit Ethernet application standard requires the use of fibre optic light to achieve the specified data transmitting rates. Usually people use long wave transceiver modules for Gigabit Ethernet, these modules have to operate both single mode and multi mode fibres. And as we know, multimode fibre manufacturing techniques create index of refraction anomalies along the centreline of the multi mode fibre core. When a highly concentrated single mode fibre optic light is sent into the centre of a multimode fibreglass, the modes that propagate through the index of refraction anomalies spread out in time causing modal dispersion, this effect is called Differential Mode delay. Differential Mode Delay results in reduced bandwidth over distance. By allowing the single mode laser launch to be offset away from the centre of the multi mode fibre the mode conditioning patch cord reduces the effect of such differential mode delay. FEATURES & BENEFITS IEEE-802.3z (Gigabit Ethernet) Compliant Permanent offset closure Low profile offset closure Low loss Fits existing cabling scheme Easy to use Masks Differential Mode Delay (DMD) effects Correct offset always maintained Aesthetically pleasing Uses precision ceramic ferrules in place of standard equipment-to-cable plant patch cord Functions the same as a standard patch cord CORE OFFSET DIAGRAM Singlemode Multimode Mode Conditioning Lead Technique Data Connector Types Available SC, FC, ST, LC, MU Transmit Insertion Loss Typical 0.35dB Receive Insertion Loss Typical 0.15dB Return Loss Working Temperature -45 to +85 C Standard IEEE Z DIAGRAM SHOWING THE USE OF A MODE CONDITIONING LEAD Singlemode Gigabit Transceiver Multimode Fibre Singlemode Fibre Multimode Gigabit Cable Plant Yellow singlemode side to transmit side of equipment Swap of transmit and receive is done on cable plant side *Contact MSS Fibre Systems to order your required Launch Lead 22

23 Connectors SC CONNECTORS CON-SC-EP-MM1 CON-SC-EP-SM CON-SCA-EP-SM CON-SC-HM-MM CON-SC-HM-SM CON-SC-CLIP CON-SC-LC-MM CON-SC-LCP-MM ST CONNECTORS CON-ST-EP-MM1 CON-ST-EP-SM CON-ST-HM-MM CON-ST-HM-SM CON-ST-LC-MM CON-ST-LCP-MM SC Connector Simplex Multimode Epoxy - Beige SC Connector Simplex Singlemode Epoxy - Blue SC Angled Connector Simplex Singlemode Epoxy - Green SC Connector Simplex Multimode Hot Melt SC Connector Simplex Singlemode Hot Melt SC Duplex Connector Clip - Plastic SC Connector Simplex Multimode Light Crimp SC Connector Simplex Multimode Light Crimp Plus ST Connector Simplex Multimode Epoxy ST Connector Simplex Singlemode Epoxy ST Connector Simplex Multimode Hot Melt ST Connector Simplex Singlemode Hot Melt ST Connector Simplex Multimode Light Crimp ST Connector Simplex Multimode Light Crimp Plus LC CONNECTORS CON-LC-D-EP-MM1 LC Connector Duplex Multimode Epoxy - Beige CON-LC-D-EP-SM LC Connector Duplex Singlemode Epoxy - Blue CON-LC-LCP-MM LC Connector Simplex Multimode Light Crimp Plus FC CONNECTORS CON-FC-EP-MM FC Connector Simplex Multimode Epoxy CON-FC-EP-SM FC Connector Simplex Singlemode Epoxy FIELD INSTALLABLE PRE-POLISHED UNICAM CONNECTORS CON-ST-UC-MM1 ST Connector Multimode OM1 UNICAM CON-SC-UC-MM1 SC Connector Multimode OM1 UNICAM CON-LC-UC-MM1 LC Connector Multimode OM1 UNICAM CON-ST-UC-MM3 ST Connector Multimode OM3 UNICAM CON-SC-UC-MM3 SC Connector Multimode OM3 UNICAM CON-LC-UC-MM3 LC Connector Multimode OM3 UNICAM CON-ST-UC-SM ST Connector Singlemode OS1 UNICAM CON-SC-UC-SM SC Connector Singlemode OS1 UNICAM CON-LC-UC-SM LC Connector Singlemode OS1 UNICAM CON-SCA-UC-SM SCA Connector Singlemode OS1 UNICAM 23

24 Pre-Polished FibreCAT Connectors The new MSS FibreCAT is the ideal solution for field termination of fibre optic cable. The FibreCAT is a pre-polished connector therefore no polishing is required eliminating a difficult and time consuming process. The connectors are available in SC, LC and ST styles in OM1, OM3 and OS1, can be terminated within 1 minute and offer reliable optical performance. FEATURES AND BENEFITS No Fibre Experience: Pre-polished so no epoxy or polishing required Fast & Easy: Can be terminated within 1 minute Performance: Reliable and superior optical performance Durability: Termination process can be repeated 3-4 times Quality: Complies with IEC, EIA/TIA and Telecordia standards CON-SC-FCAT-MM1 CON-SC-FCAT-MM3 CON-SC-FCAT-SM CON-SCA-FCAT-SM CON-LC-FCAT-MM1 CON-LC-FCAT-MM3 CON-LC-FCAT-SM CON-LCA-FCAT-SM CON-ST-FCAT-MM1 CON-ST-FCAT-MM3 CON-ST-FCAT-SM SC OM1 Multimode Fibrecat Connector - 900/250um SC OM3 Multimode Fibrecat Connector - 900/250um SC OS1 Singlemode Fibrecat Connector - 900/250um SCA OS1 Singlemode Fibrecat Connector - 900/250um LC OM1 Multimode Fibrecat Connector - 900/250um LC OM3 Multimode Fibrecat Connector - 900/250um LC OS1 Singlemode Fibrecat Connector - 900/250um LCA OS1 Singlemode Fibrecat Connector - 900/250um ST OM1 Multimode Fibrecat Connector - 900/250um ST OM3 Multimode Fibrecat Connector - 900/250um ST OS1 Singlemode Fibrecat Connector - 900/250um 24

25 Plastic Optic Fibre Connectors The MSS Plastic fibre connectors are a low cost solution for optic networks. They are designed to suit 1mm diameter plastic optic fibre (POF). The MSS Plastic HFBR fibre connectors are available in two styles: latching and non-latching. The connectors are made of a rugged, flame retardant plastic which is good for industrial and other harsh environments. The HFBR Connectors are available in three colours; black, blue and grey. FEATURES AND BENEFITS Durable ULTEM Plastic Material Easy connectivity Low manufacturing cost Suitable for harsh environments APPLICATIONS These (POF) connectors can be used for any application in which plastic optical fibre is used including: Industrial Control and Voltage Isolation Automotive Networks Proprietary System Interconnects Gaming Equipment Medical Equipment Telecommunications Data communications Home Audio HFRB-4506 (Duplex) CON-ST-POF-1MM POF Attenuation vs. Wavelength HFRB-4506 (Duplex) HFRB-4503 (Grey) HFRB-4513 (Blue) HFRB-4501 (Grey) HFRB-4511 (Blue) CON-HFBR4501Z HP Plastic Fibre Connector - Grey Simplex CON-HFBR4503 HP Plastic Fibre Connector - Grey Simplex With Latch CON-HFBR4505Z HP Plastic Fibre Feed thru Adaptor - Grey CON-HFBR4506Z HP Plastic Fibre Connector - White Duplex CON-HFBR4511Z HP Plastic Fibre Connector - Blue Simplex CON-HFBR4513 HP Plastic Fibre Connector - Blue Simplex With Latch CON-HFBR4515Z HP Plastic Fibre Feed thru Adaptor - Blue CON-HFBR4531Z HP Plastic Fibre Connector - Grey Simplex CON-HFBR4593Z HP Plastic Fibre Connector - Polishing Kit 25

26 Thru-Adaptors Thru-Adapters are used to link two connectors, usually by mounting in a distribution panel or wall box. Single-mode and multi-mode are available, as well as simplex and duplex versions. Connections available in SC, SCA, ST, LC, FC, MTRJ and ST-SC. SC Thru-Adaptors OM1 OM3 OM4 OS1/OS2 Type THRU-SC-S-MM THRU-SC-S-SM Simplex THRU-SC-D-MM THRU-SC-D-MM3 THRU-SC-D-MM4 THRU-SC-D-SM Duplex SCA Thru-Adaptors OS1/OS2 TTHRU-SCA-S-SM THRU-SCA-D-SM Type Simplex Duplex LC Thru-Adaptors OM1 OM3 OM4 OS1/OS2 Type THRU-LC-D-MM THRU-LC-D-MM3 THRU-LC-D-MM4 THRU-LC-D-SM Duplex THRU-LC-QUAD-MM THRU-LC-QUAD-MM3 THRU-LC-QUAD-SM Quad ST Thru-Adaptors OM1 OS1/OS2 Type THRU-LC-S-MM THRU-ST-SM Simplex FC Thru-Adaptors OM1 OS1/OS2 Type THRU-FC-DD-MM THRU-FC-DD-SM Simplex ST-SC Thru-Adaptors OM1 OS1/OS2 Type THRU-STSC-D-MM THRU-STSC-D-SM Simplex MTRJ Thru-Adaptors OM1 OS1/OS2 Type THRU-MTRJ-MM THRU-MTRJ-SM Simplex 26

27 Attenuators An optical attenuator is a device used to reduce the power level of an optical signal, either in free space or in an optical fibre. MSS stock a range of singlemode attenuators to suit most common applications. MSS attenuators are available in SC, SCA and LC in 5dB 10dB and 15dB. Multimode attenuators are also available upon request. FEATURES AND BENEFITS High quality ferrules ensure reliable performance BI-directional use Environmentally stable and reliable Small size Build out style for easy use Available in SC, SCA and LC Available 5dB, 10dB and 15dB Other types available on request SPECIFICATIONS Operating Wavelength Attenuation Levels Operating Temperature 1310/1550nm 5, 10, 15dB -40 to +85 C SC/SCA Attenuator Dimensions 34mm 2.1mm 9mm 12.7mm LC Attenuator Dimensions 30.2mm 6.1mm 4.5mm 9.8mm 9.4mm ATT-SC-SM-5 SC Singlemode Male-Female Attenuator - 5dB ATT-SC-SM-10 SC Singlemode Male-Female Attenuator - 10dB ATT-SC-SM-15 SC Singlemode Male-Female Attenuator - 15dB ATT-SCA-SM-5 SCA Singlemode Male-Female Attenuator - 5dB ATT-SCA-SM-10 SCA Singlemode Male-Female Attenuator - 10dB ATT-SCA-SM-15 SCA Singlemode Male-Female Attenuator - 15dB ATT-LC-SM-5 LC Singlemode Male-Female Attenuator - 5dB ATT-LC-SM-10 LC Singlemode Male-Female Attenuator - 10dB ATT-LC-SM-10 LC Singlemode Male-Female Attenuator - 15dB 27

28 1RU Enclosure Kit- Sliding Chassis The 1RU Enclosure Kit is a 19 1RU sliding panel supplied complete with 3 different adapter plates and splicing accessories. It comes in 2 parts: one sliding chassis and 3 front panels, enabling the housing of most connector types. The flexibility of its two piece modular construction gives you the ability to attach suitable panels as required. FEATURES AND BENEFITS DIN41491 All in one fibre enclosure Recessed panel mounting option Interchangeable panels to accept most connector styles Detachable rear plate for larger cable entry 4 rear cable entries (2x PG16, 2x PG13.5) No exposed screws 450 working angle High quality grey finish Light weight Complete with splice tray & install accessories 1RU-S-24KIT 1RU Sliding, All in one modular enclosure kit OPTIONAL EXTRAS Parameter Value Height 1RU (44.4mm) Width 482mm Depth 205mm Net Weight 2.3kg Packaged Weight 2.6kg Packaged Dimensions 530W x 250D x 45mmH Suitable Adapter Type All types Mounting Adjustment Range 50mm Rear Cable Port ø 25mm 2 Rear Cable Port ø 20mm 2 Material Cold Rolled Steel Material Thickness 1.2mm Material Coating Powder Coating Standard Colour Basalt Grey 7012 Operating Temperature (C) -40 to +60 C Compliant To RoHS, Reach/SvHC 1RU-S-24KIT 28

29 DATASHEET 19 Sliding Enclosure The MSS 19 Rack Mount Sliding Enclosures offer the installer a premium product with a variety of features for easy direct termination or fusion splicing of cables due to its unique sliding tray system. Its modular design provides the flexibility to choose from a variety of thru-adaptor types including ST, SC, FC, LC and MTRJ. Splice cassettes are easily fitted via pre-installed mountings and the sliding tray allows technicians easy access back into the enclosure after installation for repairs and maintenance. FEATURES AND BENEFITS Tough and Durable steel design Supports a wide range of splice cassettes Utilises modular coupler panels to suit your connector type (see coupler panels) Quality 2 stage sliding mechanism Accommodates up to 96 fibres depending on selected enclosure Adjustable mounting brackets Angled rear cable mounts Comes with M20 gland, strength clamp and cable management clips 1RU-S-24MOD Size 43.6H x 482W x 296Dmm Coupler Panels 2 Colour Grey Material Steel Weight 3.30kg 2RU-S-48MOD Size 88H x 482W x 296Dmm Coupler Panels 2 Colour Grey Material Steel Weight 4.55kg 3RU-S-96MOD Size 131H x 482W x 296Dmm Coupler Panels 2 Colour Grey Material Steel Weight 5.50kg 1RU-S-24MOD 1RU Sliding - Modular 2 Panel up to 24 fibre 2RU-S-48MOD 2RU Sliding - Modular 4 Panel up to 48 fibre 3RU-S-96MOD 3RU Sliding - Modular 8 Panel up to 96 fibre 29

30 19 Fixed Rack Mount Enclosure The MSS 19 Fixed Rack Mount Enclosures offer the installer an affordable product of compact design perfect for small cabinets or wherever space is limited. The rack mount enclosures ensure stability due to its ridged design and ease of use. Available only in a modular coupler panel version capable of housing ST, SC, LC, FC, MTRJ. FEATURES AND BENEFITS Compact Design Tough and Durable Steel Supports a wide range of splice cassettes Accommodates up to 24 fibres (48 for LC) Access via screw lid 20mm rear gland holes MSS-1RU-F-24MOD Size 43.6H x 482W x 246.6Dmm Coupler Panels 2 Colour Grey Material Steel Weight 2.90kg *Utilizes Modular Coupler Panels MSS-1RU-F-24MOD 1RU Fixed - Modular 2 Panel up to 24 fibre (250mm deep) INCLUDES MSS-BAG-BITS 1x M20 Cable Gland, 4x Cable Ties, 4x Clips, 1x Clamp 30

31 1RU Static Sliding Enclosure PRoDUcT DETAilS: The 1RU Static Sliding Enclosure is specifically designed to allow for internal patching and management of patchcords, therefore preventing accidental damage or deliberate tampering. It is ideal for fusion splicing and direct termination in environments that require a high level of patching security or where rack depth is limited. It features a unique internal patchcord management system that protects outgoing patchcords from damage, interference and exceeding minimum bend radii. The two 12 port SC adapter panels allow for up to 24 SC or 24 Duplex LC patches within the 1RU enclosure, housing a maximum of 48 fibres. features AnD benefits Internal patching reduces the distance required between the front door and the enclosure Unique patchcord and cable management system prevents potential squashing and jamming of fibres and patchcords Rear cable mounting bracket allowing multiple cable entry and additional cable retrofitting Extendable double slide rails for smooth sliding Interface kit for safe mounting of loose tube cables included Comprehensive accessory kit for rack mounting, cable entry and fibre management included APPlicATionS Especially suited for confined spaces or where rack space is at a premium Ideal where patchcord security and tampering prevention is required Suitable for fusion splicing and direct termination Suitable for 19, 21 and 23 racks SPEcificATionS 1RU Static Sliding Enclosure Specifications Size (HxWxD) 44Hmm x 433Wmm x 340Dmm (Excluding Mounting Brackets) Weight 4.46kg Static Slider rear gland setup (Unloaded Excluding Accessories and Packaging) Quantity of Internal Panels 2 x 12 port SC Maximum Fibre Count 24F SC or 48F LC Cable Entry Reversible rear bracket and loose tube conduit interface kit allowing for single or multiple cable entry (up to 4) through 1 entry aperture, ability to retrofit additional cables Material and Colour Powder coated 1.6mm mild steel dark grey Static Slider rear view setup STAnDARD included AccESSoRiES 1 x Cable Gland 1 x Cable Guide 10 x 100mm Cable Ties 2 x 150mm Cable Ties 1 x Cable Holder Set 4 x Cable Guide A 2 x Cable Guide B 4 x Cable Nut & Bolt Set 1 x Velcro, 1 x Tube 1 x Tube Adaptor 1 x Fixing Clip. optional AccESSoRiES Sliding storage tray 21 and 23 Mounting ears Splice cassettes Additional corrugated conduit for remote cable breakout and fixing ordering information MSS-1RU-S/S-24MOD 1RU Static Sliding Enclosure (for 2 Panels/24 Fibre) 31

32 1RU High Density Pivot Panel with maximum Cooling Airflow capability The 1RU High Density Pivot Panel is designed to accept 24 SC simplex footprint adaptors within each of two ½U trays. Each tray fully manages the incoming fibres, pigtails and splices. The panel can pivot by up to 116 to allow easy access during installation or rework with no disturbance of the existing cable or fibres. Angled adaptors route exiting patch cords directly into the cabinet side management. An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment. FEATURES AND BENEFITS 48 SC Simplex or LC Duplex connections Angled adaptors for reduced bend losses Fully integrated fibre management 1RU overall with ½U individual trays High flow ventilation and side cable entry 30mm bend radius maintained throughout Single layer interleaved splicing area Individually labelled ports Accepts both loose tube and distribution cable RoHS, REACH and SvHC Available in standard colours and packaging Fits standard 19 or ETSI rack with adjustable positioning Adjustable position with respect to frame Individual cable tie and strength member tie points in each tray Individual PG13.5 gland entry point for each tray Cable entry from both sides, pivot dependant APPLICATIONS Telecom outside plant,odf and CPE Ethernet, Fibre Channel, ATM, LAN, MAN and WAN Data communication ODF and distribution Indoor and outdoor applications SPECIFICATIONS 1RU Static Sliding Enclosure Specifications Size (HxWxD) 44Hmm x 479Wmm x 282.5Dmm Net Weight 3.0kg IP Rating N/A Suitable for Adaptor Type SC Simplex, LC Duplex (Pre-term only) Number of Adaptor Positions 48 Mounting Adjustment Range 64mm Material Cold-rolled Steel Material Thickness 1.5mm Material Coating Powder Coating Colour Grey RAL7035 Operating Temperature -40 C to +60 C Compliant To RoHS, Reach/SVHC Designed In Accordance With TIA/EIA 568.C, ISO/IEC 11801, EN50173, IEC60304, IEC61754, EN RU-ODF-48SCS 1RU High Density Pivot Panel 48 SC Simplex Static Slider rear gland setup 32

33 Small Wall Mount Enclosures ProDucT DETAilS: The MSS Small Wall Mount Enclosures offer the installer a compact and heavy duty solution for cable management and fibre termination. Ideal when space is limited or project does not require a complex enclosure. Its modular design provides the flexibility to choose from a variety of thru-adaptor types including ST, SC duplex, FC, LC and MTRJ. FEATurES AnD benefits Small compact design Tough and Durable Accommodates up to 24 fibres Access via screw lid 20mm gland holes Utilises modular coupler panels to suit your connector type (see coupler panels) WB-12/24MOD Size 270H x 207W x 73Dmm Coupler Panels 2 Colour Grey Compound Steel Weight 1.55kg WB-12MOD Size 207H x 207W x 43.6Dmm Coupler Panels 1 Colour Grey Compound Steel Weight 1.30kg WB-12-SPH Size 160H x 140W x 50Dmm Coupler Panels 1 Colour Grey Compound PLastic Weight 0.5kg ordering information WB-12MOD WB-12/24MOD WB-12-SPH optional EXTrAS MSS-BAG-BITS Wall Box - 12 Fibre Metal (1x Coupler Panel) Screw/Lid Wall Box - 12/24 Fibre Metal (2x Coupler Panel) Screw/Lid Wall Box - Corning Single Panel Housing (for 1 Panel/12 Fibre) 1x M20 Cable Gland, 4x Cable Ties, 4x Clips, 1x Clamp 33

34 Hinged Wall Mount Enclosures The MSS Hinged Wall Mount Enclosures offer the installer a robust, heavy duty premium product with a variety of features for easy direct termination or fusion splicing. M20 gland holes for cable entry, cable management clips and fusion splice tray mounts are provided. Also features lockable door to secure cable point of entry compartment. The modular design provides the flexibility to choose from a variety of thruadaptor types including ST, SC duplex, FC, LC and MTRJ. FEATURES AND BENEFITS Heavy duty hinge mechanism Tough and durable steel design Supports a wide range of splice cassettes Accommodates up to 24 or 48 fibres depending on product Access via lockable doors Modular coupler panels to suit your connector type Comes with m20 gland, strength clamp and cable management clips WB-24MOD Size 260H x 333W x 100Dmm Coupler Panels 2 Colour Grey Compound Steel Weight 3.10kg WB-48MOD Size 330H x 403W x 100Dmm Coupler Panels 2 Colour Grey Compound Steel Weight 4.60kg WB-24MOD-TH Size 260H x 333W x 100Dmm Coupler Panels 2 Colour Grey Compound Steel Weight 3.10kg WB-24MOD Wall Box - 24 Fibre Metal (2x Coupler Panel) Two Doors WB-24MOD-TH Wall Box - 24 Fibre Metal (2x Coupler Panel) Two Doors (Front Hinged) WB-48MOD Wall Box - 48 Fibre Metal (4x Coupler Panel) Two Doors OPTIONAL EXTRAS MSS-BAG-BITS 1x M20 Cable Gland, 4x Cable Ties, 4x Clips, 1x Clamp 34

35 Flat Coupler Panel Kits - with Thru Adapters MSS Flat Coupler Panel Kits come with thru adapters to simplify the ordering process. The kits are available for all modes and come in LC, SC and ST variations from 6 fibre to 24 fibre capacity. With 1 part number you can order the panel and thru adapters you need. FEATURES AND BENEFITS Includes enough thru adapters to fully populate panel Thru adapters are coloured to easily identify mode Flangeless thru adapter design with metal clips simply clicks into panel (LC and SC only) COMPATIBLE WITH THE FOLLOWING MSS FIBRE ENCLOSURES Wall Mount WB-12MOD WB-12/24MOD WB-24MOD WB-24MOD-TH WB-48MOD Rack Mount 1RU-F-24MOD 1RU-S-24MOD 1RU-S/S-24MOD 2RU-S-48MOD 2RU-S-48MOD LC Thru Adapters & Plates Mode Fibre # Number PF-LD12FBN-M1 OM1 12 N/A PF-LD12FBN-M3 OM3 12 N/A PF-LD12FBN-M4 OM4 12 N/A PF-LD12FBN-SM SM 12 N/A PF-LD24F1/12N-M1 OM PF-LD24F1/12N-M3 OM PF-LD24F1/12N-M4 OM PF-LD24F1/12N-SM SM PF-LD12FBN-M1 PF-LD24F1/12N-M3 ST Thru Adapters & Plates Mode Fibre # Number PF-STS06FBN-M1 MM 6 N/A PF-STS06FBN-SM SM 6 N/A PF-STS12F1/12N-MM MM PF-STS12F1/12N-SM SM PF-STS12F13/24N-MM MM PF-STS12F13/24N-SM SM PF-STS06FBN-M1 PF-STS12F1/12N-MM PF-STS12F13/24N-SM PF-LD24F13/24N-M1 OM PF-LD24F13/24N-M3 OM PF-LD24F13/24N-M4 OM PF-LD24F13/24N-SM SM SC Thru Adapters & Plates Mode Fibre # Number PF-SD12F1/12N-M1 OM PF-SD12F1/12N-M3 OM PF-SD12F1/12N-M4 OM PF-SD12F1/12N-SM SM PF-SD12F13/24N-M1 OM PF-SD12F13/24N-M3 OM PF-SD12F13/24N-M4 OM PF-SD12F13/24N-SM SM PF-LD24F13/24N-SM PF-SD12F1/12N-M3 PF-SD12F13/24N-SM 35

36 Flat Coupler Panels MSS Flat Coupler Panels support a wide variety of panel configurations including ST Simplex, SC Duplex, SC Simplex, LC Duplex and MTRJ and also numbered if required. Our coupler panels are made from steel and clip into the MSS Rack Mount and Wall Box range of modular Enclosures. They use simple but effective push and pull locking clips to secure. Custom configurations are available. FLAT COUPLER PANEL DIMENSIONS 159mm 159mm 27mm 27mm PNL-BLK-F PNL-SC12-D-F1/12 Flat SC Panels Un-Numbered Numbered SC Simplex (6 Port/6 Fibre) SC Simplex (12 Port/12 Fibre) SC Duplex (6 Port/12 Fibre) PNL-SC6-S-F PNL-SC12-S-F PNL-SC12-D-F PNL-SPH-SCD PNL-SC12-S-F1/12 PNL-SC12-S-F13/24 PNL-SC12-D-F1/12 PNL-SC12-D-F13/24 ST Panels ST Simplex (6 Port/6 Fibre) Flat Un-Numbered PNL-ST6-F Numbered ST Simplex (12 Port/12 Fibre) PNL-ST12-F PNL-SPH-ST PNL-ST12-F1/12 PNL-ST12-F13/24 LC Panels LC Duplex (12 Port/24 Fibre) Flat Un-Numbered Numbered PNL-SC12-S-F1/12 PNL-SC12-S-F PNL-SC12-S-F13/24 Blank Flat Un-Numbered PNL-BLK-F Numbered 36

37 Angled Coupler Panels MSS Angled Coupler Panels support a wide variety of panel configurations including ST Simplex, SC Duplex, SC Simplex, LC Duplex and MTRJ and also numbered if required. Our coupler panels are made from steel and clip into the MSS Rack Mount and Wall Box range of modular Enclosures. They use simple but effective push and pull locking clips to secure. Custom configurations are available. ANGLED COUPLER PANEL DIMENSIONS 159mm 27mm PNL-SC12-D-F1/12 SC Panels SC Simplex (6 Port/6 Fibre) SC Simplex (12 Port/12 Fibre) SC Duplex (6 Port/12 Fibre) Angled Un-Numbered Numbered (Left) Numbered (Right) PNL-SC6-S-A PNL-SC12-S-A-1/12L PNL-SC12-S-A-1/12R PNL-SC12-S-A13/24R PNL-SC12-D-A PNL-SC12-D-A1/12L PNL-SC12-D-A1/12R PNL-SC12-D-A13/24L PNL-SC12-D-A13/24R PNL-SC12-D-A25/36L PNL-SC12-D-A25/36R PNL-SC12-D-A37/48L PNL-SC12-D-A37/48R PNL-SC12-D-A49/60L PNL-SC12-D-A49/60R PNL-SC12-D-A61/72L PNL-SC12-D-A61/72R PNL-SC12-D-A73/84L PNL-SC12-D-A73/84R PNL-SC12-D-A85/96L PNL-SC12-D-A85/96R PNL-SC12-D-A97/108 ST Panels ST Simplex (6 Port/6 Fibre) ST Simplex (12 Port/12 Fibre) Angled Un-Numbered Numbered (Left) Numbered (Right) PNL-ST6-S-A PNL-ST12-S-A1/12L PNL-ST12-S-A-1/12R PNL-ST12-S-A13/24R 37

38 Angled Coupler Panels LC Panels LC Duplex (6 Port/12 Fibre) SC Duplex (6 Port/12 Fibre) Angled Un-Numbered Numbered (Left) Numbered (Right) PNL-SC12-S-A-1/12L PNL-SC12-S-A-1/12R PNL-SC12-S-A13/24R PNL-LC24-D-A1/24L PNL-LC24DA25/48L PNL-LC24-D-A25/48R PNL-LC24DA49/72L PNL-LC24-D-A49/72R PNL-LC24DA73/96L PNL-LC24-D-A73/96R PNL-LC24DA97/120L PNL-LC24-DA97/120R PNL-LC24DA121/144L PNL-LC24-DA121/144R PNL-LC24-DA145/168R PNL-LC24-DA169/192R PNL-LC24-DA193/216R PNL-LC24-DA217/240R PNL-LC24-DA241/264R PNL-LC24-DA265/288R A 38

39 Defence Wall Box The MSS Defence Wall Box has a compact and heavy duty design, made from powder coated 1.6mm zinc seal steel to withstand the toughest of environments. Utilises knock-out holes to ensure unused ports remain sealed. Optional 3mm thick clear polycarbonate covers for visual inspection. FEATURES Punch-out holes Small compact design Supports 1 splice tray Optional metal lid to ensure safety Supplied with mounting screws Optional transparent lids Provision for roto seals SPECIFICATIONS WB-FOB-ST/SC/SC-SCD Size DIMENSIONS 42H x 200W x 120Dmm Connector Styles ST SC SC-SCD Colours Compound Weight (without lid) Metal Lid Plastic Lid Top: Grey/Red Steel 610g 155g 50g 6 x ST Ports 6 x SC Simplex Ports 1 x SC Simplex 1 x SC Duplex Ports Back: 136.8mm 0.8mm Side: 200mm Front: 136.8mm 42mm 42mm 200mm ᴓ20mm WB-FOB-SC-SCD Defence Spec Wall Box 1 x SC Simplex 1 x SC Duplex WB-FOB-ST Defence Spec Wall Box 6 x ST WB-FOB-SC Defence Spec Wall Box 6 x SC Simplex ORDERING EXTRAS MSS-BAG-BITS 1x M20 Cable Gland, 4x Cable Ties, 4x Clips, 1x Clamp 39

40 Belden MIPP Patch Panel Innovative modular design enables quick and easy installation! Industrial design makes it highly suited for use in Transportation, Power Generation, Power Transmission/Distribution and other industrial network applications. FEATURES AND BENEFITS Cable entry from top and bottom for ring topology Slice tray and multiple fingers for easy fibre management Easy to mount DIN Rail CAT6 UTP and STP Fibre OM3 and SM* Combination Fibre and CAT6 UTP (Shielded)* Combination Fibre and CAT6 STP (Shielded)* *Brilliance fibre connectors included Unshielded Shielded SC Fibre LC Fibre FIBRE OMS AND SM (Brillance fibre connectors included) Fibre Type Duplex Ports Adapter BEL-AD3A OM3 6 LC BEL-AD3B OM3 6 SC BEL-BD3A3A OM3 12 LC BEL-BD3B3B OM3 12 SC BEL-ADSA SM 6 LC BEL-ADSB SM 6 SC BEL-BDSASA SM 12 LC BEL-BDSBSB SM 12 SC ALSO AVAILABLE Combination Fibre CAT6 UTP (Unshielded) (Brillance fibre connectors included) CAT6 Ports Fibre Type Duplex Ports Adapter BEL-BD6A3A 2 OM3 6 LC BEL-BD6A3B 2 OM3 6 SC BEL-BD6B3A 4 OM3 6 LC BEL-BD6B3B 4 OM3 6 SC BEL-BD6ASA 2 SM 6 LC BEL-BD6ASB 2 SM 6 SC BEL-BD6BSA 4 SM 6 LC BEL-BD6BSB 4 SM 6 SC ALSO AVAILABLE CAT6 UTP and STP CAT6 Ports Shielded BEL-AD6A 2 No BEL-AD6B 4 No BEL-BD6B6A 6 No BEL-BD6B6B 8 No BEL-AD6C 2 Yes BEL-AD6D 4 Yes BEL-BD6D6C 6 Yes BEL-BD6D6D 8 Yes ALSO AVAILABLE Combination Fibre CAT6 STP (Shielded) (Brillance fibre connectors included) CAT6 Ports Fibre Type Duplex Ports Adapter BEL-BD6C3A 2 OM3 6 LC BEL-BD6C3B 2 OM3 6 SC BEL-BD6D3A 4 OM3 6 LC BEL-BD6D3B 4 OM3 6 SC BEL-BD6CSA 2 SM 6 LC BEL-BD6CSB 2 SM 6 SC BEL-BD6DSA 4 SM 6 LC BEL-BD6DSB 4 SM 6 SC 40

41 Mini DIN Rail Mounted Enclosure The Mini DIN Rail Mounted Enclosure joins our range of compact and DIN Rail Mounted Fibre Termination Enclosures. Its compact design gives it the ideal form factor for installation into densely populated industrial cabinets. FEATURES AND BENEFITS Small size making it very versatile Accommodates up to 12 x SC or LC duplex adapters Ideal for housing pre-terminated loose tube and tight buffered cables Allows for fusion splicing of up to 24 fibres, when two enclosures are fitted together Top and bottom cable entry to suit installation environment APPLICATIONS Process automation and control Intelligent transport system Rail signalling and control networks Power systems and control Pre-terminated cabling solutions SPECIFICATIONS 12 Port Mini DIN Rail Mounted Enclosure Specifications Size (HxWxD) Weight Maximum Number of Splices 12 Maximum Fibre Count (Front Panel) Incoming Cable Ports Material and Colour Standard Accessories ACCESSORIES AVAILABLE 105Hmm x 54Wmm x 155Dmm 0.67kg 12 SC and LC 1 top and bottom Pigtails Splicing consumables Termination consumables Pre-tailed fibre optic cable assemblies available : WB-12MOD-DIN Powder coated 1.6mm zinc annealed steel dark grey Cable gland, central strain relief post, DIN rail mounting clip, laser badge, fibre clips and through adapters Mini DIN Rail Mounted Enclosure Rear view showing bracket assembly 41

42 IP Distribution Wall Boxes These Lockable IP65 distribution boxes offer the ability to terminate from fibres housed in robust ABS enclosures for indoor and outdoor applications. With the ability to use both SC or LC adaptor types, offering a flexible solution to the end user, enabling them to incorporate a multi- functional enclosure which allows easy access during installation or re-work with no disturbance of the existing cable or fibres. Also sufficient exit points for patching cables and cable entry points for loose tube, tight buffered and pre-terminated cables. Each enclosure has integrated strength member tie positions and bend radius protection with the addition of a removable front door allowing for quick and easy installation. APPLICATIONS Data centres, data communication, premise installations, and telecommunication networks Ethernet, Fibre Channel, ATM, LAN, MAN and WAN Indoor/outdoor applications FEATURES AND BENEFITS: WB-12-SCD-IP Up to 24 fibres (250um only/12 for 900um) Removable splice tray for easy installation IP65 Rated Accepts loose tube, tight buffered and preterminated cables Integrated bend radius protection Lockable door for added security Removable door for ease of installation Supplied with sufficient heatshrink splice protectors ROHS, REACH & SVHC compliant SPECIFICATIONS FEATURES AND BENEFITS: WB-24-SCS-IP Product Specification WB-12-SCD-IP WB-24-SCS-IP Height 258mm 340mm Width 186mm 270mm Depth 61mm 110mm Net Weight 0.85kg 1.8kg Supports up to 24 Fibres IP65 Rating for external use Lockable door for added security Integrated cable tie points for securing incoming cable Up to 24 splice & SC connection points Removable splice tray for easy installation Accepts loose tube, distribution and pre-terminated cables Integrated bend radius protection Removable door for ease of installation Supplied with 24 heatshrink splice protectors Supplied with transit tubing, wall fixings and cable ties ROHS, REACH & SVHC compliant Packaged Dimensions 275H x 197W x 65Dmm 355H x 280W x 100Dmm IP Rating Suitable for Adaptor Type SC Duplex/LC Quad SC Simplex/LC Duplex Number of Fibres 12 to 24* 24 Number of Ports 6 24 Cable Entry 20mm 1 2 Cable Exit 20mm 2 24 Operating Temperature Designed in Accordance With Compliant To IP65-40oC to +60oC TIA/EIA 568.C, ISO/IEC 11801, EN50173, IEC60304, IEC61754, EN297-1 ROHS, REACH, SVHC WB-12-SCD-IP WB-24-SCS-IP WB-12-SCD-IP WB-24-SCS-IP IP65 Indoor/Outdoor Distribution Box Fibre IP65 Indoor/Outdoor Distribution Box 24 Fibre 42

43 IP66 EDC Wall Boxes - Enviromental Distribution Centre (EDC) The Environmental Distribution Centre (EDC) is designed for storage and protection of fibre optic connections and splices in indoor and outdoor environments. The composite construction offers outstanding chemical and temperature resistance with excellent durability. The cover may be secured with quick release latches or padlocked for additional security. Rated to NEMA 4X or IEC IP66, the unit offers protection from corrosion, rain, sleet, snow and windblown dust. The EDC includes the brackets required for mounting to a wall or pole and additional accessories include a grounding kit, a rack-mount kit and various fittings. FEATURES NEMA 4X or IEC IP66 rated Lockable cover Indoor and outdoor use Unit is easy to punch, drill or saw Mounting kit available Supports up to 12 panels SPECIFICATIONS WB-EDC-02P-NH Size Coupler Panels Colour Compound Weight 318H x 267W x 159Dmm 2 CCH Panels Grey/Silver Steel 4.5kg WB-EDC-12P-NH Size Coupler Panels Colour Compound Weight 472H x 422W x 262Dmm 12 CCH Panels Grey/Silver Steel 12.7kg WB-EDC-06P-NH Size 419H x 368W x 211Dmm Coupler Panels 6 CCH Panels Colour Grey/Silver Compound Steel Weight 9.1kg 19 Fixed Enclosures WB-EDC-02P-NH Environmental Distribution Centre accepts 2 CCH Connector Panels WB-EDC-06P-NH Environmental Distribution Centre accepts 6 CCH Connector Panels WB-EDC-12P-NH Environmental Distribution Centre accepts 12 CCH Connector Panels ORDERING EXTRAS 19 Fixed Enclosures PNL-SPH-ST ST 12 Port Coupler Panel PNL-SPH-SCD SC Duplex 6 Port Coupler Panel BAG-BITS 1x M20 Cable Gland, 4x Cable Ties, 4x Clips, 1x Clamp 43

44 Underground Dome Enclosures The Series splice domes accommodate up to 24 fibres, utilising one or two of the compact universal 12-fiber splice tray cassettes. They are ideal for low fibre count applications such as building interface and campus/lan applications. Designed for ease of installation and excellent cable management, the Series products are the most economical low count fibre splice domes in the industry. The 24 fibre model provides an extended length cover for added cable management. The Series splice domes accommodate from 48 to 72 fibres, utilising up to five of the compact universal 12-fiber tray cassettes. The Series products are modular in design and ideally suited to be field upgraded to add additional cables and splices as growth requirements occur. The series are equipped with five single entry ports and one large oval port for loop thru installations. The flexible design of the series will fit distribution network applications in the local loop, including both standard and balloon/splice configurations. Excellent cable management and storage features are included as standard, along with all components necessary to complete the installation as a factory provisioned kit. FEATURES Simple, robust design Modular, upgradable configurations Fully environmentally sealed Pole/wall mount bracket included Built-in integral fibre management Unique modular splice tray design Heatshrink ports Openable for re-entry Complete installation kit factory provisioned Universal splice holder clip for fusion or mechanical splices IP68 rating Dimensions Overall Length Clamp Diameter Max. Size B Port Min. Size B Port Max. Size A Port Min. Size A Port Max. Size Oval Port Series 14.2 (360mm) (12Fibre) 10.6 (270mm) (24 Fibre) 5.5 (140mm) 5.5 (140mm) 0.63 (16mm) dia (5.5mm) dia (13.7mm) dia (5.5mm) dia. 2x0.88 (2x22.4mm) dia. PORT CONFIGURATIONS Series Dimensions Overall Length Clamp Diameter Max. Size B Port Min. Size B Port Max. Size A Port Min. Size A Port Max. Size Oval Port Series 17.4 (443mm) 7.1 (181mm) 0.79 (20mm) dia (6mm) dia (13mm) dia (6mm) dia. 2x1.1 (2x28mm) dia Series UGDOME-12 Underground Dome Enclosure up to 12 Fibre (14000 series) UGDOME-24 Underground Dome Enclosure up to 24 Fibre (14000 series) UGDOME-48 Underground Dome Enclosure up to 48 Fibre (15000 series) UGDOME-72 Underground Dome Enclosure up to 72 Fibre (15000 series) 44

45 10/100 Media Converter Media Converters provide an intelligent solution for fibre optic connectivity where simplicity, low cost, and minimum footprint are the primary considerations. The converters are designed to handle both legacy 10BaseT and 100Base TX Fast Ethernet transmission on the fibre optic port. Plug-and-play simplicity makes connection easy. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port with Auto-MDIX capability for more convenient connection. Built-in 10/100 switch enables the fibre cable connection to operate at 100Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standardcompliant. Fibre connection can also operate in full duplex mode whether the RJ-45 port is a connected to a full duplex switch or a half duplex hub. FEATURES Auto-Cross over for MDI/MDIX in TP port Auto-Negotiation in TP port Supports link fault pass through (LFP) function LED display for link/activity, full/half 10/100M Converter mode with auto-change-forward (switch) function APPLICATION LAN FTTx Telecommunication networks SPECIFICATIONS Complies With Connector Transmission Type Data Buffer IEEE BASE-T, 802.3u 100Base- TX 100Base-FX standards UTP RJ-45 connector, optical SC, ST connector 10/100M FDX/HDX 128kb RAM Wavelength (typical) Multi-mode: Single-mode: Temperature Humidity Power Supply Dimensions Power Consumption 2.5W Compliance FC-110MSC -FC-110MST FC-110S40 FC-110S60 FC FC-110MLC 1300nm ( 2Km) 850nm ( 550m) 0 to 50 C (Operating) -45 to 80 C (Storage) 5%-80% non-condensing (Operating) 10%-90% (Storage) External 1A, +5VDC External power version 95L x 70W x 26Hmm RoHS & Reach FCC Part 15 Class B CE EN55022: 1998+A1: 2000+A2: 2003 EN : 2000+A2: 2005 EN : 1195+A1: 2001 EN55024: 1998+A1: 2001+A2: nm up to 60km 1550nm up to 120km 10/100Base-T/TX to 100Base-FX Multimode SC Fibre Converter (1300nm 2km) 10/100Base-T/TX to 100Base-FX Multimode ST Fibre Converter (1300nm 2km) 10/100Base-T/TX to 100Base-FX Singlemode SC Fibre Converter (1300nm 40km) 10/100Base-T/TX to 100Base-FX Singlemode SC Fibre Converter (1300nm 60km) 10/100Base-T/TX to 100Base-FX Singlemode SC Fibre Converter (1300nm 120km) 10/100Base-T/TX to 100Base-FX Multimode LC Fibre Converter (1300nm 2km) 45

46 Gigabit Media Converter The 10/100/1000 Media Converter provides an intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and the newer 1000Base Gigabit Ethernet networks. The built-in 10/100/100 converter enables the fibre cable connection to operate at 1000 Mbps connected to either a 10BaseT, 100BaseTX or a 1000BaseT network, while remaining completely 1000BaseSX standard-compliant for the fibre optic connection. The fibre connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or half duplex hub. FEATURES Automatic identification of MDI/MDI-X cross line. 10/100/100MBPS port with full half duplex auto-negotiation Back pressure flow control for full duplex Converter mode with auto-change-forward (switch) function. APPLICATION LAN FTTx Telecommunication networks SPECIFICATIONS Complies With Connector Data Buffer IEEE BASE-T Standard IEEE802.3u 100BASE-TX/FX Fast IEEE802.3ab 1000BaseT IEEE802.3z 1000BaseSX/LX UTP RJ-45 connector, optical SC, ST connector 2 Megabyte Wavelength (typical) Multi-mode: Single-mode: Temperature Humidity Power Supply Dimensions Power Consumption 2.5W Compliance FC-1000MSC FC-1000MST FC-1000S20 FC-1000S60 FC-1000S120 FC-1000MLC 850nm ( 550m) 1300nm( 2km) 0 to 50 C (Operating) -45 to 80 C (Storage) 5%-80% non-condensing (Operating) 10%-90% (Storage) External 1A, +5VDC External power version 95L x 70W x 26Hmm RoHS & Reach FCC Part 15 Class B CE EN55022: 1998+A1: 2000+A2: 2003 EN : 2000+A2: 2005 EN : 1195+A1: 2001 EN55024: 1998+A1: 2001+A2: nm up to 60km 1550nm up to 120km 10/100/1000 Base-T/TX to 1000Base-SX/LX Multimode SC Fibre Converter (1300nm 2km) 10/100/1000 Base-T/TX to 1000Base-SX/LX Multimode SC Fibre Converter (1300nm 2km) 10/100/1000 Base-T/TX to 1000Base-SX/LX Multimode SC Fibre Converter (1310nm 20km) 10/100/1000 Base-T/TX to 1000Base-SX/LX Multimode SC Fibre Converter (1310nm 60km) 10/100/1000 Base-T/TX to 1000Base-SX/LX Multimode SC Fibre Converter (1550nm 120km) 10/100/1000 Base-T/TX to 1000Base-SX/LX Multimode LC Fibre Converter (1300nm 2km) FC-1000MLC /100/1000 Base-T/TX to 1000Base-SX/LX Multimode LC Fibre Converter (850nm 550m) FC-1000MSC-550 0/100/1000 Base-T/TX to 1000Base-SX/LX Multimode SC Fibre Converter (850nm 550m) FC-1000MST-550 0/100/1000 Base-T/TX to 1000Base-SX/LX Multimode ST Fibre Converter (850nm 550m) 46

47 Multimode to Singlemode Media Converter Multimode to single mode converters provide efficient solutions for interconnecting mutlimode fibre LANs over longer distances by intergrating single mode fibre optic cables into the LAN. The converter also enables Ethernet LAN and WAN connectivity, by providing a multimode interface to single mode fibre carrier demarcation points. Models are available for single mode to multimode conversion between fast ethernet devices, or for asynchronous transfer mode (ATM) applications transported over a synchronous optical network (SONET). Each media converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. FEATURES Extend a gigabit Ethernet backbone connection up to 80km for MAN (metropolitan area network) applications Converts multimode to single mode (and vice versa) Converts single mode to single mode or multimode to multimode Increases distance between nodes Cross connects fibre types Performs optical repeater function (with 1x9 or SFP transceiver modules) APPLICATION LAN FTTx Telecommunication networks SPECIFICATIONS Complies With Tranceiver Type Tranceiver Connector Types Wavelength (typical) Temperature Humidity Power Supply Dimensions Compliance MTBF FC-110MS20 FC-1000MS20 IEEE 802.3u 100BaseFXIEEE 802.3z 1000BaseSX/LX Multimode or single mode Duplex SC, ST, FC Multimode: 850n m ( 550m), 1310nm ( 2Km) Singlemode: 1310nm up to 40Km, 1550nm up to 80Km 0-50 C (Operating) C (Storage) 5% - 80% non-condensing (Operating) 10% - 90% (Storage) External 1A, +5VDC External power version 95mm x 70mm x 26mm (LxWxH) RoHS & REAcHFFCC Part 15 Class BCE EN55022: 1998=A1:2000+A2: 2003EN :2000+A2:2005EN : 1995+A1: 2001EN55024: 1998+A1:2001+A2: ,000 h (25 C) 100Base-FX Mulitmode SC 1300nm 2km to Singlemode SC km Fibre Converter 1000Base-LX Singlemode SC 1310nm 20km to Multimode SC 1300nm 2km Fibre Converter 47

48 Cleaning Kits Fibre Optic Cleaning Kits are essential in the industry and the base Fibre Optic Connector Cleaning Kit comes complete with numerous inclusions. Also available is a cleaning kit for Telecommunications companies and a cleaning kit for Contractors. These comprise of the CLEANKIT1 with additional products added to the kits. MSS Fibre Cleaning Kits can also be optioned to include: 200x and 400x Inspection Microscopes 1.25mm and 2.5mm One-Click Cleaners Various Consumables as required (contact MSS for options) INCLUSIONS Cleaning Kits Ordering Options CLEANKIT1 CLEANKIT-TELCO CLEANKIT-CONT 1 x Fibre Optic Connector Cassette Cleaner 1 x CLEANKIT1 (see column for inclusions) 1 x CLEANKIT1 (see column for inclusions) 1 x Replacement Reel for Cassette Cleaner 1 x CLEANER-1CLICK x CLEANER-1CLICK x Pre-saturated Isopropyl Wipes 1 x ALCOHOL x ALCOHOL x 2.5mm Fibre Optic Cleaning Sticks 1 x CANAIR 1 x CANAIR 50 x 1.25mm Fibre Optic Cleaning Sticks 100 x Lint-free Wipes 1 x Isopropyl Cleaning Pen Cleaning Kits can be optioned up to also include Inspection Microscopes Various Consumables One-Click Cleaners MSS-CLEANKIT1 MSS-CLEANKIT-TELCO MSS-CLEANKIT-CONT Cleaning Kit for Fibre Optic Connectors Cleaning Kit for Telecommunications Cleaning Kit for Contractors 48

49 Consumables CLEANING PRODUCTS CLETOP-A Cletop Cleaning Cassette - Type A CLETOP-B Cletop Cleaning Cassette - Type B CLETOP-REEL Cletop Replacement Cleaning Reel (Type A & B) ALCOHOL-125 Isopropyl Alcohol - 125ml Spray Bottle CLEANER-C Budget Universal Connector Cleaner CLEANER-R Replacement Reel For Universal Cleaner SHARPS Fibre Sharps Container 250ml ALCOHOL-1 Isopropyl Alcohol - 1 Litre Bottle ALCOHOL-6OZ Alcohol Dispenser - 6oz CANAIR Pressurised Canned Air - 235g ISOPADS Isopropyl Pads - Box of 100 ISOWIPE Isopropyl Wipes - Tub of 75 LFWIPES Lint-Free Kim Wipes - Box of 280 STICK-1.25 Cleaning Stick mm STICK-2.50 Cleaning Stick mm CLEANER-1CLICK-1.25 One Click Cleaner Suits LC, MU 1.25mm CLEANER-1CLICK-2.5 One Click Cleaner Suits ST, SC, FC 2.5mm LAPPING/POLISHING PRODUCTS FILM-0.5-D-6X6 0.5um Diamond Lapping Film - 6x6 Sheet FILM-1-D-6X6 1um Diamond Lapping Film - 6x6 Sheet FILM-3-D-6X6 3um Diamond Lapping Film - 6x6 Sheet FILM-6-D-6X6 6um Diamond Lapping Film - 6x6 Sheet FILM um Lapping Film - 23 x 17cm Sheet FILM-1 1um Lapping Film - 23 x 17cm Sheet FILM-2-ROUND 2um 1 Step Lapping Film - 3m FILM-3 3um Lapping Film - 23 x 17cm Sheet FILM-5 5um Lapping Film - 23 x 17cm Sheet FILM-10 10um Lapping Film - 23 x 17cm Sheet FILM-12 12um Lapping Film - 23 x 17cm Sheet OTHER CONSUMABLE PRODUCTS EPOXY Quick Cure Anaerobic Adhesive Kit - Cold Cure EPOXY-2PART Epoxy 2 Part Heat Cure - 2 Gram FOCTAPE Fibre Optic Cable Warning Tape - 66m roll FOCTAPE-D Detectable Fibre Optic Warning Tape - 250m GELCLEAN 3M Gel Cleaning Kit Pack of 10 SYRINGE Syringe & Needle POLYTUBE Clear 900um Poly Tubing - 100m roll FIBRE-3MM-OR 900um Orange Over Sleeving (per metre) FIBRE-3MM-YL 900um Yellow Over Sleeving (per metre) FIBRE-3MM-AQ 900um Aqua Over Sleeving (per metre) 49

50 One-Click Cleaner FEATURES AND BENEFITS Simple one action cleaning system Low cost per clean, up to 800 cleans per unit Cleans mounted connectors installed within enclosures and equipment Consistent and effective cleans delivered with precise mechanical action Cleans a variety of contaminants Compliant with EU/95/2002/EC Directive (RoHS) Dust Contamination Liquid Contamination Before Cleaning After Cleaning Before Cleaning After Cleaning CLEANER-1CLICK-1.25 CLEANER-1CLICK-2.5 One Click Cleaner Suits LC, MU 1.25 Ferrules One Click Cleaner Suits ST, SC, FC 2.5 Ferrules 50

51 Warning Tape INSTALLING FIBRE OPTIC CABLE? Protect your network with Warning Tape to avoid repairs and unhappy clients! Warning tape should be laid with your cable to alert people working in that area! DETECTABLE WARNING TAPE Warning tape is available in detectable versions which are suitable for underground direct buried applications. The fibre optic cable (which is usually non-metallic) can then be located from the surface prior to any digging as the tape contains a metal trace wire. 100mm Total Length = 250M PVC WARNING TAPE The MSS PVC Warning Tape is best suited for internal use inside cabinets and cable pathways. 100mm Total Length = 66M *Both Warning tapes can be customised to include your logo and wording can be altered to suit (minimum order quantities apply) FOCTAPE FOCTAPE-D-250 Fibre Optic Cable Warning Tape - 66m Roll Detectable Fibre Optic Cable Warning Tape - 250m Roll 51

52 Warning Flexi Post The MSS Fibre Flexi Posts are manufactured in Tasmania from Australian made virgin upvc, especially formulated with UV stabilisers and impact modifiers to ensure the product does not vary beyond Australian Main Road Specifications. Flexi Posts are provided with a 5 year guarantee against faulty manufacture or materials. Flexi Posts are 100% recyclable and our factory welcomes the return of any of its manufactured products. DETECTABLE WARNING TAPE Vehicle Impact Tested Field Rigidity tested to 1kg load Retro Reflectives complies with AS1906-part 1 requirements Heat Resistance Tested Cold Resistance Tested Impact Tested Water Tested Hydro Carbon Tested Fire Resistance tested to 33 minutes Flammability Tested FLEXI POST MATERIAL PERFORMANCE Material High impact UV stabilised rigid PVC Tensile Strength 23 C Thermal Expansion Compression Strength Softening Point 80 C Specific Gravity 1.45 Flammability Width Colour INSTALLATION OF DRIVABLE POSTS Degrees C in order of 45 x 10-6 over a 55 C (100 F) temperature movement a Supa-Flex-Marker post will have an expansion/contraction in the order of 2.5mm per metre. 630kg/sq.cm Self-extinguishing, will not support combustion. 105mm minimum Orange for easy visibility The Flexi Posts may be supplied with a tongue to resist extraction, with the bottom end being pointed to assist driving. Standard Length: 1800mm Width: 105mm minimum Installation: Driveable Posts WARNING FIBRE OPTIC CABLE BURIED BELOW Make sure that safety is at the top of your list. Use a Fibre Optic Cable sign. Give people the information they need. MSS-FOCPOST Fibre Optic Warning Flexi Post Thickness: 4mm 52

53 Fan-Out Kits - 6 & 12 Fibre Fan-out kits are specifically designed to sleeve the 250um loose tube fibre with 900um buffer tube. These buffer tube fan-out kits provide the ultimate solution for those users who want to field install connectors onto loose tube cable. The kits provide the most compact, easy to install fan-out solution requiring no additional hardware or space than that required for terminating tight-buffered cables. Fan-out kits feature a 900μm fan-out assembly that is colour coded to match the fibre colour code standard. The fan-out assembly is available in 6 or 12 fibre. FEATURES Eliminates strain on fibres by isolating them from tensile forces Colour coded fan-out tubing Snap-together furcation unit eliminates epoxy for indoor kits Compact design Quick and easy to install Optimised for field termination of cables Excellent fibre routing capabilities Bend radius protection designed into each unit APPLICATION Field termination of loose tube cables to assist connectorisation. SPECIFICATIONS Length of Tubing Fibres Per Buffer Tube FANOUT-6 635mm (25 ) 6 FANOUT mm (25 ) 12 FANOUT mm (47 ) 12 COMPLETED KIT DIMENSIONS 44.5mm 1.75inch Furcation Unit Fan-Out Assembly 11.2mm 0.446inch 20.1mm 0.791inch 7.7mm 0.303inch FANOUT-6 Corning/Siecor Fan-Out Kit - 6 Fibre FANOUT-12 Corning/Siecor Fan-Out Kit - 12 Fibre FANOUT Corning/Siecor Fan-Out Kit - 12 Fibre 47 Inch 53

54 Tooling FIBRE STRIPPING & CUTTING TOOLS TKEVCUT Miller Kevlar Cutters TNONIK-175 NoNik Fibre Strippers - 175um Yellow TNONIK-200 NoNik Fibre Stripers - 200um Red TSTRIP-250 Miller Stripper 250um TSTRIP-250/900 Miller Stripper 250um & 900um TSTRIP Loose Tube Cable Stripper TSTRIP Blue Ideal Coax Stripper TSTRIP-CFS2 Clauss Stripper CFS-2-900um Yellow TSPLIT-BLUE Corning/Siecor Tube Splitter - Blue TSPLIT-RED Corning/Siecor Tube Splitter - Red SCRIBES TSCRIBE-CONE TSCRIBE-WEDGE POLISHING TPAD-SQ TPUK-LC TPUK-SC TPUK-ST Fibre Scribe - Conical Tip Fibre Scribe - Wedge Tip Rubber Polishing Pad - Square Polishing Puk - LC - Duplex Polishing Puk - SC Polishing Puk - ST TERMINATION KITS TERMKIT-EPOXY RUGGEDIZED CASES Complete Epoxy Connector Termination Kit TERMKIT-HM 3M Hot Melt Connector Termination Kit 6361 TERMKIT-LCP TERMKIT-UC TERMKIT-UC-PFC PEL-1400 PEL-1450 PEL-1550 Light Crimp Plus Termination Kit (ST, SC, MTRJ, LC) UNICAM Termination Kit (ST, SC, MTRJ, LC) with UC (SF), Score and Snap Cleaver (TKT-UNICAM) UNICAM Pretium Termination Kit (ST, SC, LC) with UC (SF) Cleaver (PFC) Pelican Case (300L x 230W x 130Dmm) Pelican Case (400L x 330W x 180Dmm) Pelican Case (480L x 360W x 200Dmm) OTHER TOOLS SHARPS OVEN-24 Fibre Sharps Container Connector Curing Oven (ST, SC, FC) 24 Port 54

55 Epoxy Fibre Optic Tool Kit The MSS epoxy Fibre Optic Termination Tool Kit contains everything you need to properly strip, prep, terminate, crimp, and polish SC and ST connectors. The tool kit also includes a fibre optic microscope with 160x, 180x and 200x optical zoom. KIT CONTAINS Fibre optic stripper High carbon alloy steel scissors Fibre optic scribe Foam swabs cleaning kit Microscope 200x 125mm side cutter 3ml universal syringe SC polishing disc ST polishing disc Utility component storage box Crimp tool Carrying zipper bag SPECIFICATIONS MSS Epoxy Fibre Optic Kit Tool Specifications Fibre Optic Crimping Tool Side Cutter Fibre Optic Kevlar Cutter Fibre Optic Stripper Carbide Fibre Scribe Universal Syringe Utility Component Storage Box Foam Swabs Cleaning Kit Polish Disc Polish Disc Fibre Optic Viewing Scope Kit Zipper Case Weight Customised Fibre Optic Tool Kit TERMKIT-EPOXY TERMKIT-CUSTOM inch inch inch inch inch 5 (125mm) 6¼ (160mm) 6 (150mm) 3.2mm 3ml 165L x 95W x 45Dmm 10 swabs Cleaning Liquid For SC connector For ST connector 160x ~ 200x 280L x 197W x 70Dmm 1.7kg MSS Fibre Systems can create customised kits that will meet whatever fibre needs you may have. Our termination kits contain all the tools necessary to terminate ST, SC, LC, FC and SMA connectors. Consumable items can be ordered separately or included in the kit. From cleaning to splicing to termination and restoration, we have the kit for all your needs. Complete Epoxy Connector Termination Kit Contact MSS to customise your own Fibre Optic Termination Kit 55

56 Standard Fusion Splicer The Inno View 5 core alignment fusion splicer has all the features you expect to find on a market leading fusion splicer. The 5 inch colour touch screen can be flipped allowing the operator to work from in front of or behind the splicer and the intuitive Graphical User Interface makes it easy to operate. 520X magnification, 7 seconds splice time and 13 seconds heat time make this one of the fastest splicers on the market and the preset heat and splice modes add to its ease of use. The View 5 s 4200mAh battery can produce up to 170 splice/heat cycles per charge and the included 12V cigarette lighter cable means it can be recharged from a vehicle. FEATURES Market leading 520X magnification 5 inch colour touch screen 7 seconds splice time 13 seconds heat time Long battery life, 170 splice/heat cycles Easy to replace electrodes (no tools required) 3500 arc electrode life 35 preset splicing modes 6 preset heating modes 3 bright LED s for dark environments SPECIFICATIONS Applicable Fibres SM (ITU-TG.652 & G.657), MM (ITU-TG.651), DS (ITUTG.653), NZDS (ITU-TG. 655) Average Loss Return Loss Splice Time Cleaved Length Operating Method Number Of Fibre Operating Environment SM (0.02dB), MM (0.01dB), DS (0.04dB), NZDS (0.04dB), G.657 (0.02dB)»60dB Quick Mode 7 Seconds / Auto Mode 9 Seconds Diameter: mm / Cleave Length: 8-16mm Button click and Touch screen Single Fibre View & Magnification X, Y, XY, X/Y 520X Magnification Monitor Splicing Mode Heating Mode Compatible Fibre/Cable Lighting Heat Oven/Heating Time Results Storage Tension Test Storage Condition Protection Sleeve Electrode Life No. Of Splice/Heating With Battery Altitude: m; Humidity: 0-95%; Temperature: -10 to 50 C; Max Wind: 15m/s 90 bi-directional view, 5 inch colour high resolution touch screen Up to 128 modes (includes 35 preset) 32 modes (includes 6 preset) mm / Indoor Cable 3 white LED Fast heating time of 13 seconds Last 2000 results N 0-95% relative humidity, -40 to 80 C 20-60mm Power Supply AC V; DC 9-14V Ports Size (HxWxD) Weight 3500 arc, increasing life span with electrode grinder 4200mAh Battery Capacity / Typical 170 times (Splice + Heat) USB2.0, Mini USB 147Hmm x 130Wmm x 155Dmm 2.21kg (with battery) / 1.85kg (without battery) 56

57 V7 2 Step Auto Bin Cleaver The Inno V7A Precision Cleaver is designed for installers terminating both loose tube and tight buffered style cables. With a typical blade life span of 48,000 cleaves, the V7A Cleaver is ready for daily use. The optional Ribbon Fibre Holder upgrades the V7A into an NBN ready Ribbon Fibre Cleaver, making it the ideal cleaver for all fibre terminations. VIEW 5 PACKAGE KIT INCLUDES View 5 Fusion Splicer V7A 2 Step Auto Bin Cleaver AC Adapter Battery Pack Power Cable Fibre Holder Spare electrodes Stripper Cooling Tray User Manual CD Carrying Case SPECIFICATIONS Size (HxWxD) Weight Cleaved Length 62Hmm x 101Wmm x 82Dmm 387g 8-20mm (Single Fibre), 10mm (Ribbon Fibre) A Clad Diameter 125µm Cleaved Angle Sharps Collection Bin Life Span Of Blade Less than 0.5 with Single Fibre Automatic Total 48,000 cleaves SPLICER-VIEW-5 CLEAVER-V7A View 5 Fusion Splicer Kit includes D1 1 Step Auto Bin Cleaver V7 2 Step Precision Cleaver with Auto Bin 57

58 High End Fusion Splicer The Inno View 7 core alignment fusion splicer has all the features you expect to find on a market leading fusion splicer. The 5 inch colour touch screen can be flipped allowing the operator to work from in front of or behind the splicer and the intuitive Graphical User Interface makes it easy to operate. 520X magnification, 7 seconds splice time and 13 seconds heat time make this one of the fastest splicers on the market and the preset heat and splice modes add to its ease of use. The View 7 s 9800mAh battery can produce up to 355 splice/heat cycles per charge and the included 12V cigarette lighter cable means it can be recharged from a vehicle. FEATURES AND BENEFITS Market leading 520X magnification 5 inch colour touch screen 7 seconds splice time 13 seconds heat time Long battery life, 355 splice/heat cycles Easy to replace electrodes (no tools required) 3500 arc electrode life 35 preset splicing modes 5 preset heating modes 3 bright LED s for dark environments SPECIFICATIONS Applicable Fibres SM (ITU-TG.652 & G.657), MM (ITU-TG.651), DS (ITUTG.653), NZDS (ITU-TG. 655) Average Loss Return Loss Splice Time Cleaved Length Operating Method Number Of Fibre Operating Environment SM (0.02dB), MM (0.01dB), DS (0.04dB), NZDS (0.04dB), G.657 (0.02dB)»60dB Quick Mode 7 Seconds / Auto Mode 8 Seconds Diameter: mm / Cleave Length: 8-16mm Button click and Touch screen Single Fibre View & Magnification X, Y, XY, X/Y 520X Magnification Monitor Splicing Mode Heating Mode Altitude: m; Humidity: 0-95%; Temperature: -10 to 50 C; Max Wind: 15m/s 90 bi-directional view, 5 inch colour high resolution touch screen Up to 128 modes (includes 35 preset) 32 modes (includes 5 preset) Compatible Fibre/Cable 250µm - 900µm Lighting Heat Oven/Heating Time Results Storage Tension Test Storage Condition Protection Sleeve Electrode Life No. Of Splice/Heating With Battery 3 white LED Fast heating time of 13 seconds Last 2000 results N 0-95% relative humidity, -40 to 80 C 20-60mm Power Supply AC V; DC 9-14V Ports Size (HxWxD) Weight 3500 arc, increasing life span with electrode grinder 9800mAh Battery Capacity/Typical 355 times (Splice + Heat) USB2.0, Mini USB 167Hmm x 143Wmm x 163Dmm 2.8kg (with battery) / 2.17kg (without battery) 58

59 V7A 2 Step Auto Bin Cleaver The Inno V7A Precision Cleaver is designed for installers terminating both loose tube and tight buffered style cables. With a typical blade life span of 48,000 cleaves, the V7A Cleaver is ready for daily use. The optional Ribbon Fibre Holder upgrades the V7A into an NBN ready Ribbon Fibre Cleaver, making it the ideal cleaver for all fibre terminations. VIEW 7 PACKAGE KIT INCLUDES View 7 Fusion Splicer V7A 2 Step Auto Bin Cleaver AC Adapter Battery Pack Power Cable Fibre Holder Spare electrodes Stripper Cooling Tray User Manual CD Carrying Case SPECIFICATIONS Size (HxWxD) Weight Cleaved Length 62Hmm x 101Wmm x 82Dmm 387g 8-20mm (Single Fibre), 10mm (Ribbon Fibre) A Clad Diameter 125µm Cleaved Angle Sharps Collection Bin Life Span Of Blade Less than 0.5 with Single Fibre Automatic Total 48,000 cleaves SPLICER-VIEW-7 CLEAVER-V7A View 7 Fusion Splicer Kit includes V7A 2 Step Auto Bin Cleaver V7 2 Step Precision Cleaver with Auto Bin 59

60 Precision Cleavers The D1 High Precision Cleaver is a fully automatic cleaver with a universal holder, which is applicable to 250µm fibre cable, 900µm fibre cable, flat cable and fibre jumper cable. As the cleaving operation is fully automatic, the cleaving time and instruction is improved. The D1 also features an automatic collector for fibre shards and off cuts. The blade provides over 48,000 cleaves by easy and simple blade position selection. The D1 High Precision Cleaver is the fastest processed cleaver with stable operation function. Inno V7 2 Step Cleaver The Inno V7 Series Precision Cleaver is designed for installers terminating both loose tube and tight buffered style cables and the universal holder that works with both 250µm and 900µm means there s no time lost setting up the cleaver when you change fibre types. With a typical blade life span of 48,000 cleaves, the V7 Series is ready for daily use by dedicated Fibre installers and to protect your precision tool when not in use a storage case is included. An automatic sharps bin comes standard with the V7A model, keeping your work area free of sharps making it OH&S friendly. The V7 Series produces cleave angles of less than 0.5 making low loss terminations quick and easy to complete, saving the installer time and money by not re-terminating splices due to poor cleave angles. The optional Ribbon Fibre Holder upgrades the V7 Series Cleaver into an NBN ready Ribbon Fibre cleaver, making it the ideal Cleaver for all fibre terminations. SPECIFICATIONS Model D1 High Precision Cleaver Inno V7 2 Step Cleavers Size (HxWxD) 60.69Hmm x 86Wmm x 76.52Dmm 62mm H x 64mm W x 74mm D (V7 Model) 62mm H x 101mm W x 82mm D (V7A Autobin Model) Weight 286g 341g (V7 Model) 387g (V7A Autobin Model) Clad Diameter 80µm-125µm 125µm Cleaved Length 9-20mm (Single Fibre) 8-20mm (Single Fibre) 10mm (Ribbon Fibre) Cleaved Angle Less than 0.5º with Single Fibre Less than 0.5º with Single Fibre Life Span of Blade CLEAVER D1 CLEAVER-V7A CLEAVER-V7 CLEAVER-V7-RH Total 48,000 cleaves (1,000 fibre for 1 step, total 16 steps, 3 heights) Operation Steps 1 Step 2 Steps Reclaim Function Blade Pushback Blade Pushback D1 High Precision Cleaver V7A 2 Step Precision Cleaver with Auto Bin V7 2 Step Precision Cleaver (no auto bin) Ribbon Holder to suit CLEAVER-V7 and CLEAVER-V7A Total 48,000 cleaves (1,000 fibre for 1 step, total 16 steps, 3 heights) Holder Universal Holder Universal Holder for 250µm and 900µm Applicable Fibre Cable 250µm Fibre Cable, 900µm Fibre Cable, Flat Cable and Fibre Jumper Cable 250µm Fibre Cable, 900µm Fibre Cable Ribbon Fibre Cable (Ribbon Holder required) Sharps Collection Bin Automatic Automatic (V7A Model only) D1 High Precision Cleaver packaging 60

61 Large Splice Cassette Budget 24 splice tray with lid. Trays are stackable and interlock on top of each other (without the need for additional hinges). Ideal for higher fibre count applications. FEATURES AND BENEFITS Splice tray for up to 24 fibres Large bend radius and good cable management Can be assembled into a stack with no additional clips Includes splice cassette lid SPECIFICATIONS Dimensions Weight Material W&B Small Splice Cassette - 12 Fibre FEATURES AND BENEFITS SPECIFICATIONS W&B Large Splice Cassette - 24 Fibre FEATURES AND BENEFITS SPECIFICATIONS SPLICE FN SPLICE SPLICE SPLICE-HINGE 200W x 24H x 120Dmm 80g ABS (Acrylonitrile Butadiene Styrene) The MSS small splice tray safely stores up to 12 fusion splices using two clip type fusion splice protector holders as detailed below. Loose tube clamps incorporated into tray design Includes splice cassette lid Other size splice protector holders available Can be stacked using optional hinges Compact design Dimensions Weight Material 143W x 11H (without lid) x 95Dmm Lid 3Hmm 42g (without lid) 62g (with lid) Noryl E190 VO Rated This universal splice tray safely store up to 24 fusion splices using two clip type fusion splice protector holders as detailed below. Loose tube clamps incorporated into tray design Includes splice cassette lid Other size splice protector holders available Can be stacked using optional hinges Dimensions Weight Material 194W x 10H (without lid) x 116Dmm Lid 3Hmm 65g (without lid) 100g (with lid) Noryl E190 VO Rated Large Splice Cassette with Lid (200 x 120) - 24 Fibre Small W&B Splice Cassette with Lid (143 x 95) - 12 Fibre Large W&B Splice Cassette with Lid (194 x 116) - 24 Fibre Rubber hinges for Stacking W&B Splice Cassettes 61

62 Corning Cam Splice The Corning Cam Splice is a simple to use product that is compatible with both multimode and singlemode fibres. It features a cam locking mechanism, which requires no adhesive. The Cam Splice incorporates a unique, patented fibre alignment method that self-centres the fibres and provides extremely accurate alignment. The average splice loss for the Cam Splice is specified at 0.15dB with a minimum loss less than 0.3dB. The process does not involve any adhesives or special tools, although an optional assembly fixture is recommended. A typical installation takes less than two minutes. A compact, self-contained tool kit is available with standard tools including the optional assembly fixture. FEATURES AND BENEFITS Self centering fibre alignment mechanism No adhesive or epoxy required Universal, one-part-fits-all fibre coating Optional lead-in tubes for securing 900um fibres Index-matching gel pre-inserted No stress on fibre in alignment area Fits in industry-standard splice trays SPECIFICATIONS Dimensions Mean Splice Loss Blind Splcie Loss Temperature Range Vibration Tensile Reflectance 44L x4.2wmm 0.15dB <-0.3dB -40 to +75 C, < 0.1dB average variation 10 to 55Hz with 1.52mm maximum excursion, three planes, <0.5dB variation, two hours in each plane 226grams <-45dB (flat cleave) <-60dB (angled cleave) CAMSPLICE Corning/Seicor Mechanical Splice (Pack of 6) 62

63 Fibre Microscope The MSS Hand Held Fibre Microscope is used for inspecting the fibre connector end face. Coaxial illumination (CL) series provides excellent detail of scratches and contamination through its high precision and quality components. The 200x and 400x Fibre Microscope utilises a white light LED for both oblique illumination and coaxial illumination, Both utilise precision all-glass optics, integrated laser safety filters. The microscope comes standard with ST/SC/FC adapter with optional LC and MTRJ adaptors available if required. FEATURES AND BENEFITS Led illumination Laser filter installed for eye protection Versatile adapter interface Clear bright images Smooth focus control Momentary or push button on/off switch Comes with a universal adapter 2.5mm ferrules ACCESSORIES INCLUDED Soft Carrying Case User Manual SPECIFICATIONS Optical Magnification Power Requirements LED Rated Life Weight Battery Size Controls Laser Safety Filter Adapter interface Colour Safety Filter 200x & 400x 3 AAA alkaline batteries hrs 0.6kg 3 AAA 225L x 32W x 45Dmm Momentary on/off switch; Fine-Focus control Built-in Use interchangeable, presented universal or dedicated adapters Silver Built in IR filter Light Source Entrance Focus Adjustment Adapter Ring Eyepiece AAA AAA AAA AAA Battery slot On/Off Switch SCOPE-400X 400x Microscope for Multimode ST/SC/FC SCOPE-200X 200x Microscope for Multimode ST/SC/FC SCOPE-LC LC Adaptor for 200x & 400x SCOPE-MTRJ MTRJ Adaptor for 200x & 400x 63

64 Pocket Visible Fault Locator The MSS Pocket Fault Locator is designed for either singlemode or multimode use. The pocket-sized unit allows you to visually locate micro-bends, fibre breaks, and other sources of optical attenuation in fibre Patch Leads, Patch panels, and Enclosures. The class 2 visible laser operates at 650nm in both continuous and pulse modes. The unit has a 30 hour battery life in continuous mode and 40 hours in modulated mode. This unit includes batteries and protection holster. FEATURES AND BENEFITS All Aluminium Construction 650nm Laser 2.5mm or 1.25mm Universal Adapter Finds Sharp Bends and Breaks Test for Continuity 6-7km Singlemode 4-5km Multimode Nylon Belt Holster Extra-Long Battery Life with 2 AA Batteries Continuous and Modulated Modes SPECIFICATIONS Wavelengths Fibre-Coupled Output Laser Class Approx Range Battery Battery Life Adapter Dimensions Weight (with batteries) VFL-HD VFL-LC 650nm+/- 5nm 0dBm typical, -3.5dBm minimum (singlemode fibre) III (< 5mW) 6-7km (singlemode), 4-5km (multimode) 2 AA 30hrs continuous, 40hrs modulated Universal 2.5mm or 1.25mm 7.1 long x diameter 127gms Operating Temp -10 to 50 C MSS Pocket Fault Locator 2.5mm Universal Version - Blue MSS Pocket Fault Locator 1.25mm Universal Version - Blue 64

65 MSS FIP-400B Fully Automated Fibre Inspection Probe PRODUCT DETAILS This intelligent and automated test tool transforms fibre inspection into a fast and easy one-step process. It provides accurate and consistent test results, and prevents the reporting of falsepositive results. Re-engineered Design The rubber casing and controls are designed for intense field operation. The controls are strategically positioned to make the inspection process easier. Plus, the very bright status LED can be easily seen from different angles.the FIP-400B is designed so it can be handled seamlessly by both right - and left-handed users. FEATURES Fully automated, one-step process featuring automatic fibre-connection detection, image centering, focus adjustment and optimization (exclusive to EXFO), capture, pass/fail analysis and reporting. On-board connector endface analysis (IEC, IPC or custom standards) via ConnectorMax2 Pass/fail LED indicator for immediate diagnosis Optimal digital image quality with three levels of magnification Re-engineered, rugged design with ergonomic controls Many accessories available APPLICATIONS FTTx and hybrid networks Mobile fronthaul (FTTA) and backhaul Data centers Campus and private networks Military SPECIFICATIONS Size (HxWxD) Weight Resolution Camera Sensor Visual Detection Capability Field Of View 47Hmm x 42Wmm x 162Dmm (17/8in x 15/8in x 63/8in) b 0.3kg (0.66lb) 0.55μm Five-megapixel CMOS <1μm 304μm x 304μm (high mag) 608μm x 608μm (mid mag) 912μm x 912μm (low mag) Blue LED Three levels Light Source Digital Magnification Connector USB 2 a) Typical. b) Measurement excluding tip and strain relief. Extra Tips also available UPC APC FC EXF-FIPT400-FCA FC & SC EXF-FIPT400-FCSC LC EXF-FIPT400-LC EXF-FIPT400-LCA MU EXF-FIPT400-MU SC EXF-FIPT400-SC EXF-FIPT400-SCA ST EXF-FIPT400-ST Model Features FIP-410B FIP-420B FIP-430B Three Magnification Levels YES YES YES Image Capture YES YES YES Automatic Fibre Image-Centering Function NO YES YES Automatic Focus Function NO NO YES Embedded Pass/Fail Connector Analysis NO YES YES Pass/Fail LED Indicator NO YES YES FIP-410B FIP-420B FIP-430B Included Tip (s) EXF-FIP410B-SCA EXF-FIP420B-SCA EXF-FIP430B-SCA SCA EXF-FIP410B-FCSC EXF-FIP420B-FCSC EXF-FIP430B-FCSC FC & SC FIP-400B FIP-400B Fully Automated Fibre Inspection Probe 65

66 SmartFibre Pro Power Meter PRODUCT DETAILS The Optical Power Meter provides high accuracy optical power measurement with dynamic range from +3 to -60dBm and six calibrated wavelengths. SmartFiber Pro is able to display pass or fail results according to userdefined threshold, and has the capability to identify modulate signals (270Hz, 1KHz, 2KHz) from the light source simultaneously for identification purposes. We recommend using with OPTISource Light Source as a complete set in auto-identifying wavelengths. It also has the capacity to record up to 1000 test data records that are up-loadable to a PC via USB connection for easy and convenient report purposes. FEATURES Calibrated at 850nm, 1300nm, 1310nm, 1490nm, 1550nm and 1625nm Suits both multimode and singlemode optical fibres Automatic wavelength switching Optional adapter to test both 2.5mm/1.25mm fibres Battery low indicator and auto power shut off 1000 data item storing and uploading Pass/fail indication Sensor Type Wavelength Dynamic Range Accuracy Resolution Unit Connector Type Battery Dimension Weight InGaAs 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm +3 to -60dBm ±0.15dB 1300nm/1310nm/1490nm/1550nm; ±0.25db 850nm/1625nm 0.01dBm dbm, Watt, db Interchangeable adaptor for FC, ST and SC 4 x AA battery (6V) 202.8L x 107W x 64.5Dmm 550g (without battery) OPTISource Light Source PRODUCT DETAILS The OPTISource is a high performance stabilized source that is widely used in fibre network installation and maintenance. OPTISource can provide single, dual (single mode or multi mode) or quad wavelength output according to specific requirements. With interchangeable adaptor (FC, ST, SC) and power meter (SMARTFiber Pro), this choice brings you an economic and efficient solution for the fibre optic network tasks. FEATURES There are three output modes for each wavelength: CW/MOD/AUTO IDENTIFY CW and 270Hz, 1KHz, 2KHz modulated signals Auto-identify wavelength indicator (Full compatibility with SmartFiber Pro Power Meter as a complete set) Auto power off for power saving Sensor Type Wavelength Spectral Width Output Power Stability Connector Type Auto Power Off Frequency Battery 850nm, 1300nm, 1310nm, 1550nm@FP-LD 850nm, 1300nm, 1310nm, 1550nm 5nm -13dBm@850/1300nm; -5d m@1310/1490/1550nm; -3dBm@1625nm ±0.15dB/8hr@1310/1550/ ±0.25dB/8hr@850nm/1300nm Interchangeable adaptor for FC, ST and SC 30min. without key pressed 270Hz, 1KHz, 2KHz 4 x AAA battery PMLS-MM-SM Light Source & Power Meter Kit MM + SM KIT CONTAINS 1x SMARTFiber Pro Power Meter 1x OPTISource Light Source nm 66

67 FLS-600 Light Source and FPM-600 Power Meter PRODUCT DETAILS Part of EXFO s 600 handheld series, which includes the FPM-600 Power Meter and the FOT-600 Optical Loss Test Set, the FLS-600 Light Source is designed for first-class versatility. Choose among laser, LED and VCSEL models, as well as various wavelength options. What s more, you can save time by building a list of your favourite wavelengths and only sweeping through these wavelengths when testing. Team with the FPM-600, featuring its 1000 data item capacity and reporting software, enabling the user to build complete test reports including certification of the Link with the Pass/Fail information. FEATURES Up to three singlemode wavelengths (1310, 1550, and 1490 or 1625nm) on a single port, or four wavelengths (850/1300nm and 1310/1550nm) on two ports Rechargeable batteries Three-year warranty and recommended calibration interval, for low cost of ownership Ergonomic, eye-catching handheld package SPECIFICATIONS FLS-600 Model 12D 23BL 234BL Central Wavelength (nm) 850 ± / ± ± ± ± ± 15 Output Power (dbm) 18/ 18 1/ 1 1/ 3/ 5 (62.5/125μm) Power Stability (db)b 15min ± 0.05 ± 0.03 ± 0.03 Power Stability (db)b 8hr ± 0.1 ± 0.1 ± 0.1 Automatic Wavelength Recognition Yes Yes Yes Tone Generation 270Hz, 1kHz, 2kHz 270Hz, 1kHz, 2kHz 270Hz, 1kHz, 2kHz Battery Life (hours) (typical in Auto mode) Warranty and Recommended Calibration Interval (years) Size (HxWxD) 190Hmm x 100Wmm x 62Dmm (71/2in x 4in x 21/2in) Weight 0.48kg (1.1lb) Temperature Operating -10 C to 50 C (14 F to 122 F), Storage -40 C to 70 C (-40 F to 158 F) Relative Humidity 0% to 95% non-condensing SPECIFICATIONS FPM-600 Model FPM-602 FPM-602X Detector Ge GeX Power Range (dbm)b 10 to to -55 Wavelength Range (nm) 800 to to 1650 Power Uncertaintyc ±5% ± 0.1nW ±5% ± 3nW Resolution (db) ±0.01 (10dBm to -60dBm) ±0.01 (26dBm to -45dBm) Automatic Offset Nullingd Yes Yes Display Units db, dbm, W db, dbm, W Tone Detection 270Hz, 1kHz, 2kHz 270Hz, 1kHz, 2kHz Auto-switchinge Yes Yes Data Storage (Items) More than 1000 More than 1000 Battery Life (hours typical) Warranty and Recommended Calibration Interval (years) 3 3 Size (HxWxD) 190Hmm x 100Wmm x 62Dmm (7 1/2 in x 4in x 2 1/2 in) Weight 0.48kg (1.1lb) Temperature Operating -10 C to 50 C (14 F to 122 F), Storage -40 C to 70 C (-40 F to 158 F) Relative Humidity 0% to 95% non-condensing Notes a) Guaranteed unless otherwise specified. All specifications valid at 23 C ± 1 C, with an FC connector. b) After a 15-minute warm-up period, and using an APC connector on the power meter (except for multimode sources, for which a PC connector is used). Expressed as ± half the difference between the maximum and minimum values measured during the period Typical values for VCL model. Notes a) Guaranteed unless otherwise specified. All specifications valid at 1550nm and 23 C ± 1 C, with an FC connector. b) In CW mode; sensitivity defined as 6 x rms noise level c) For calibrated wavelengths. Valid up to 20dBm for FPM-602X. d) For power >-40dBm for FPM-602 and >-25dBm for FPM-602X. e) At 850nm, 1300nm, 1310nm, 1490nm, 1550nm and 1650nm; for power >-50dBm for FPM-602 and >-40dBm (typical) for FPM-602X. FLS-600 FLS-600 Light Source FPM-600 FPM-600 Power Meter 67

68 MaxTester 715B OTDR PRODUCT DETAILS The MAX-700B series is the first tablet-inspired OTDR line that is handy, lightweight and rugged enough for any outside plant environment. With a 7-inch, outdoor-enhanced touchscreen the most efficient handheld display in the industry it delivers an unprecedented user experience. Its intuitive Windowslike GUI ensures a fast learning curve. Plus, its new and improved OTDR2.0 environment offers icon-basd functions, instant boot-up, automatic macrobend finders as well as improved auto and real-time modes. Ultimately, the Max-700B series is small enough to fit in your hand and big enough to fit all your needs! FEATURES Handy, lightweight, powerful, tablet-inspired design 7-inch, outdoor-enhanced touchscreen the biggest in the handheld industry 12-hour autonomy Visual fault locator Built-in Wi-Fi/Bluetooth Dead zones: EDZ 1 m, ADZ 4 m Dynamic range of 30/28/28 db Rugged design built for outside plant iolm-ready: intelligent and dynamic application that turns complex OTDR trace analysis into a one-touch task Many accessories available APPLICATIONS FTTx last-mile installation and troubleshooting Short access-network testing FTTA fibre-das installations CATV/HFC network testing IOLM-READY (OPTIONAL) Turn every technician into a fibre test expert. The best OTDR technology: multi-pulse widths and multi-wavelengths to detect each event with the best resolution A short learning curve and low risk of misinterpretation thanks to clear schematic link view Link-Aware delivers simple, accurate fibre-optic link test results Prompt diagnosis for quick, accurate identification of network issues SPECIFICATIONS Display Interfaces Storage 7in (178mm) outdoor-enhanced touchscreen, 800x480 TFT Two USB 2.0 ports, RJ-45 LAN 10/100 Mbit/s 2GB internal memory (20,000 OTDR traces, typical) Batteries Rechargeable lithium-polymer battery, 12 hours of operation as per Telcordia (Bellcore) TR-NWT Power Supply Power supply AC/DC adapter, input VAC, 50-60Hz, 9-16V DCIN 15Watts minimum Wavelength (nm)b 1310/1550/1625 Dynamic Range (db)c 30/28/28 Event Dead Zone (m)d 1 Attenuation Dead Zone (m)e 4 Distance Range (km) 0.1 to 160km Pulse Width (ns) 5ns to 20us Linearity (db/db) ±0.05 Loss Threshold (db) 0.01 Loss Resolution (db) Sampling Resolution (m) 0.04 to 5 Sampling Points Up to 256,000 Distance Uncertainty (m)f ±( % x distance + sampling resolution) Measurement Time User-defined (60min. maximum) Reflectance Accuracy (db) ±2 Typical Real-time Refresh (Hz) 3 Laser Safety 1M MAX-715B MaxTester 715B Last-Mile OTDR Notes a) All specifications valid at 23 C ± 2 C with an FC/APC connector, unless otherwise specified. b) Typical. c) Typical dynamic range with longest pulse and three-minute averaging at SNR = 1. d) Typical, for reflectance above -55dB, using a 5-ns pulse. e) Typical, for reflectance below -55dB, using a 5-ns pulse. Attenuation dead zone at 1310nm is 5m typical with reflectance below -45dB. f) Does not include uncertainty due to fibre index. 68

69 FTB-1 Platform PRODUCT DETAILS The FTB-1 Platform is a modular system for fast and powerful FTTx (FTTH and FTTN), Ethernet, TDM and multi-service applications. Thanks to its small format, ultra-powerful processing and highly intuitive interface, the FTB-1 is optimized to allow field technicians to carry out dedicated applications simply and efficiently. The series of platform-based software testing tools available enhance the value of the FTB-1 Platform, providing additional testing capabilities without the need for additional modules or units. You can connect anywhere and anytime The value of connectivity resides in the ability to connect your platform anywhere. APPLICATIONS AND MODULES iolm: Intelligent Optical Link Mapper Using automated multipulse acquisitions and advanced algorithms, the iolm is an OTDR-based application that delivers detailed information on every element on the link, in a single-button operation, providing maximum intelligence and simplicity for expert-level link characterization. FTB-720 LAN/WAN Access OTDR Module: On the strength of best-in-class specifications and four test wavelengths, the FTB-720 is optimized for fibre-optic contractors and private network operators, enabling them to fully test and qualify any type of fibre network. FTB-730 PON FTTx/MDU OTDR Module: With a dynamic range of up to 39dB and enabling power meter and visual fault locator functionalities, the FTB-730 module allows fibre installers to seamlessly characterize splitters in PON FTTx and multiple dwelling unit (MDU) applications. FTB-700G Optical, Ethernet and Multiservice Test Module: Fronthaul/Backhaul testing (Mobile Backhaul, FTTA/remote radio heads, DAS and small cells). This all-in-one Ethernet/optical solution combines the best of fibre test capabilities (inspection, OTDR/iOLM) with a wide range of Ethernet and Multiservice Tests (OTN, SONET/SDH, Fibre Channel, GigE/10 GigE, CPRI/OBSAI and SyncE/1588 PTP), and is designed to streamline field operations when installing, activating and troubleshooting any type of fibre-fed wireless infrastructure. FEATURES Connects anywhere: USB, 3G, Wi-Fi, VPN and Bluetooth Loaded with utilities: all the tools required to maximize field testing, plus third-party applications Like a PC: Intel processor with Windows Embedded Standard operating system EXFO Connect-compatible: automated asset management; data goes through the cloud and into a dynamic database GPS capabilities: accurate coordinates under the same conditions as a regular satellite GPS receiver Many accessories available SPECIFICATIONS: Display Interfaces Touchscreen, color, 800 x 480 TFT, 178mm (7in) Two USB 2.0 ports RJ-45 LAN 10/100/1000 Mbit/s Fiber inspection probe connector port (video) Built-in Bluetooth and Wi-Fi (hardware option) Storage 8GB internal memory (flash) 16GB internal memory (flash), optional Batteries Rechargeable lithium-ion batteries 8 hours of operation as per Telcordia* (Bellcore) TR-NWT Power Supply AC/DC adapter, input VAC, 50-60Hz, 1.6A max, output 24 VDC, 3.75A Computer Intel ATOM processor Windows Embedded Standard OS Size (HxWxD) 190Hmm x 252Wmm x 66Dmm (71/2in x 915/16in x 25/8in) Weight (with battery) 1.5kg (3.3lb) Temperature Operating 0 C to 50 C (32 F to 122 F) Storage -40 C to 70 C (-40 F to 158 F) Relative Humidity 0% to 95% non-condensing Laser Safety 21 CFR and IEC :2007 Class 3R with VFL Option Notes * With optional extended-life battery. 69

70 FTB-200 OTDR Compact Platform PRODUCT DETAILS Leveraging years of experience in field testing, the FTB-200 Compact Platform remains a centerpiece of optical, Ethernet and SONET/SDH testing performance. What s more, with impressive speed, a top-of-the-line touchscreen and an expanded integrated tool kit, the FTB-200 offers increased autonomy and productivity in multi service field testing. The FTB-200 houses any of EXFO s FTB one - or two-slot modules to meet your evolving needs. Configure your platform by combining optical, transport and datacom modules to cover a wide range of applications. Offering power, speed and modularity in a compact format, the FTB-200 is the perfect tool for the field. APPLICATIONS FTTH testing WAN/LAN testing Fibre Channel testing Metro/Ethernet testing GigE/10GigE testing Fronthaul testing (FTTA, DAS and Small Cells) FEATURES Handy, lightweight, powerful, compact design 6.5 inch colour TFT touchscreen 8 hour rechargeable battery 2-slot module capacity Compatible with over 30 EXFO modules such as the FTB-7200D & FTB-7300E Series Built-in Visual Fault Locator (Optional) Built-in Power Meter (Optional) Built-in Wi-Fi/Bluetooth connectivity (Optional) SPECIFICATIONS Display 6.5in (163mm) colour touchscreen, 640x480 TFT 6.5in (163mm) outdoor enhanced colour touchscreen, 640x480 TFT (optional) Interfaces Three USB2.0 ports, RJ-45 GB LAN port Optional RF: Wi-Fi/Bluetooth Storage 8GB Internal memory (flash) Batteries Rechargeable Lithium-ion battery, 8 hours of operation as per Telecorida (Bellcore) GR-196 Power Supply AC/DC Adapter, input VAC 50/60 Hz 1.6VA max; output 24VDC 3.75A Computer Intel Atom Processor Windows Embedded Standard Size (HxWxD) 322 x 197 x 109mm Weight 2.1kg (not including battery) Built-in Power Meter Specifications (Optional) Calibrated Wavelengths (Nm) 850, 1300, 1310, 1490, 1550, 1625, 1650 Power Range (dbm) 10 to -86 (InGaAs) 26 to -64 (GeX) Visual Fault Locator (VFL) Specifications (Optional) Wavelength (Nm) 650 +/-10 EXF-FTB200 FTB-200 Base Main Frame 2-Slot EXF-FTB200-S2 FTB-200 Base Main Frame 2-Slot With Outdoor Enhanced Screen Optional Built-in Power Meter & VFL EXF-FTB200-PM-XX VFL & InGaAs Power Meter for FTB200 (Replace XX with FC, LC or SC) EXF-FTB200-PMX-XX VFL GeX Power Meter for FTB200 (Replace XX with FC, LC or SC) Optional FIP400B Fibre Inspection Probe EXF-FTB200-FIP410F FIP-410B Digital Fibre Inspection Probe with FC/SC Tip EXF-FTB200-FIP410S FIP-410B Digital Fibre Inspection Probe with SCA Tip EXF-FTB200-FIP420F FIP-420B Digital Fibre Inspection Probe with FC/SC Tip EXF-FTB200-FIP420S FIP-420B Digital Fibre Inspection Probe with SCA Tip Optional RF (Wi-Fi/Bluetooth) EXF-FTB200-RF RF Module adds Wi-Fi/Bluetooth capability COMPATIBLE MODULES FTB-7200D LAN/WAN Access OTDR Module: Optimised for multimode and singlemode network testing. FTB-7300E PON FTTx/MDU OTDR Module: Optimised for singlemode network testing, on wavelengths 1310, 1490, 1550, 1625 & 1650Nm. 70

71 MSS Launch Leads A launch lead is designed to aid in the testing of fibre optic cable when using an OTDR. It helps minimise the effects of the OTDR s launch pulse on measurement uncertainty, ie. The dead zone. Optical Time Domain Reflectometers (OTDRs) can cause measurement errors when the cable under test is plugged directly into the machine. In order to overcome this problem, a fibre optic launch lead is required of sufficient length to compensate for the errors. The OTDR launch lead provides a solution for improving the accuracy in both multimode and singlemode fibre measurements. Build Your Own Custom Launch Lead MSS Fibre Systems can Manufacture Launch Leads to meet your specific requirements Manufacturing Options Fibre 1 50/125um 62.5/125um 9/125um Other Fibre 2 (Optional) 50/125um 62.5/125um 9/125um Other Length Specify in Metres Up to 4,000 Connector Type A FC ST LC SC SCA Other Connector Type B FC ST LC SC SCA Other Connector Polish APC UPC LAUNCH LEAD HOUSING SPECIFICATIONS Dimensions Weight 210W x 165L x 90Hmm 750g FEATURES AND BENEFITS Remove the dead zone from OTDR measurements Used as a long haul system loop back for field testing transmission Three meter input and output fibre lengths Impact and crush resistant packaging Can be terminated with any style connector Available in OM1, OM2, OM3 and OS1 Handle included for portability Case made of light weight, hard plastic Silicone O-ring seals out water and dust allowing the unit to be taken into almost any environment Auto Purge Valve for changes in altitude and temperature OTDR TEST RESULTS UTILISING A LAUNCH LEAD The following graph shows the test results of a fibre optic network using a 300 metre launch lead to remove the dead zone. Ordering Information *MSS also stock a range of the industry s most used launch lead configurations LAUNCH LEAD ORDERING DETAILS 4 Connector Type: ST SC SCA LC LCA FC FCA 4 Fibre Mode: OS1 - Singlemode 9/125 OM1 - Multimode 62.5/125 OM3 - Multimode 50/125 OM4 - Multimode 50/125 4 Connector Type: ST LC SC LCA SCA FC FCA 4 Length: (in metres) Shows the results of a 300 metre Launch Lead removing the dead zone in the network Peak indicates the connection point of the launch lead and start of the network 71

72 Measuring Optical Loss LINK LOSS (ATTENUATION) Testing for link loss, or attenuation, verifies whether fibre spans meet loss budget requirements. Attenuation includes intrinsic fibre loss, losses associated with connectors and splices, and bending losses due to cabling and installation. An OTDR (Optical Time Domain Reflector) is used when a comprehensive accounting of these losses is required. The OTDR sends a laser pulse through each fibre; both directions of the fibre are tested at 1310nm and 1550nm wavelengths for singlemode or 850nm and 1300nm for multimode. OTDRs also provide information about fibre uniformity, splice characteristics, and total link distance. ORL (OPTICAL RETURN LOSS) ORL is a measure of the total fraction of light reflected by the system. Splices, reflections created at optical connectors, and components can adversely affect the behaviour of laser transmitters, and they all must be kept to a minimum of 24dB or less. You can use either an OTDR or a Loss Test Set (LTS) equipped with an ORL meter for ORL measurements. However, an ORL meter yields more accurate results. CHROMATIC DISPERSION Chromatic dispersion testing is performed to verify that measurements meet your dispersion budget. Chromatic dispersion is the most common form of dispersion found in singlemode fibre. Temporal in nature, chromatic dispersion is related only to the wavelength of the optical signal. For a given fibre type and wavelength, the spectral line width of the transmitter and its bit rate determine the chromatic dispersion tolerance of a system. Portable chromatic dispersion measurement instruments are essential for testing the chromatic dispersion characteristics of installed fibre. PMD (POLARISATION MODE DISPERSION) PMD has essentially the same effect on the system performance as chromatic dispersion, which causes errors due to the smearing of the optical signal. However, PMD has a different origin from chromatic dispersion. PMD occurs when different polarization states propagate through the fibre at slightly different velocities. The causes are fibre core eccentricity, ellipticity, and stresses introduced during the manufacturing process. PMD is a problem for higher bit rates (10GE and above) and can become a limiting factor when designing optical links. FIBRE OPTIC CABLE & CONNECTOR PERFORMANCE Cable db/km Mhz/km db/km Mhz/km Multimode 850nm 1300nm OM1 (62.5/125um) OM2 (50/125um) OM3 (50/125um) Singlemode 1310nm 1550nm OS1 Maximum SPLICE TRANSMISSIOM PERFORMANCE Splicing (Fusion) Maximum Insertion Loss (db) Multimode 0.3 Singlemode 0.3 MATED PAIR TRANSMISSION PERFORMANCE Connectors Multimode Singlemode Maximum Insertion Loss (db) Minimum Return Loss (db) CALCULATING OPTICAL LOSS To calculate the total optical loss (in db) in a system, add the cable loss, splice loss, and connector loss. Compare the loss figure obtained with the allowable optical loss budget of the receiver. Be certain to add a safety margin factor of at least 3dB to the entire system. If the peak transmitter power is -10dBm and the receiver sensitivity is -30dBm, the available power budget is 20dB. If the total loss is less than 20dB, the loss does not exceed the available budget and therefore O.K. If the total loss is 14dB, the margin or head room is 6dB. 72

73 Fibre Optic Core Inspection DESCRIPTION Any contamination in the fibre connection can cause failure of the component or failure of the entire network. Even microscopic dust particles can cause a variety of problems for optical connections. A particle that partially or completely blocks the core generates strong back reflections, which can cause instability in the laser system. Dust particles trapped between two fibre faces can scratch the glass surfaces. Even if a particle is only situated on the cladding or the edge of the end face, it can cause an air gap or misalignment between the fibre cores which significantly degrades the optical signal. Illustrations Shows a clean single mode ceramic end face at 200x magnification. Shows a connector with scratches through the cladding. These scratches are not detrimental to the end face as the scratches are not across the core. Shows a connector with liquid contamination that needs cleaning. Shows a connector with damage to the cladding. Cleaning cannot remove damaged cladding. A small amount of epoxy around the cladding is allowable, but this shows excessive epoxy around the cladding that does not clean off. This connector must be replaced or repolished. Shows a connector with dust particles spread across the surface of the end face that needs cleaning. Shows a connector with alcohol residue that needs cleaning. 73

Specification for Loose Tube Fiber Optic Cable (Non-Metallic, Dry Block, Figure-8) (G.652.D)

Specification for Loose Tube Fiber Optic Cable (Non-Metallic, Dry Block, Figure-8) (G.652.D) 2-3, Marunouchi 2-chome, Chiyoda-ku, Tokyo 100-8322, Japan No. FB-KL4001C for Loose Tube Fiber Optic Cable (Non-Metallic, Dry Block, Figure-8) (G.652.D) Aug 2014 1 1. General This specification describes

More information

Revision No. 4 Page No. Page 1 of 7

Revision No. 4 Page No. Page 1 of 7 Page No. Page 1 of 7 Single Mode Optical Fibre Cables With Loose Fibres in Stranded Tubes And Corrugated Steel tape Armouring For Duct Applications LITE KABEL SDN. BHD. reserves the right to make changes

More information

OPTICAL FIBER CABLE, ALL DIELECTRIC SELF SUPPORTING CABLE

OPTICAL FIBER CABLE, ALL DIELECTRIC SELF SUPPORTING CABLE SPEC NO. TEC-OPTIC-81101A(Rev.4)-2014.07 TECHNICAL PROPOSAL FOR OPTICAL FIBER CABLE, ALL DIELECTRIC SELF SUPPORTING CABLE ( Span length : Max. 100m ) APPROVED BY : J.Y. LEE / HEAD OF TEAM ENGINEERING TEAM

More information

NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM

NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM Content 1. General 5 2. The products of NC-1000 system 6 3. Mounting of the frame 8 4. Earthing of the frame 8 NC-1000 FIBRE OPTIC

More information

Product Catalogue. Fibre Optic Cable

Product Catalogue. Fibre Optic Cable Product Catalogue Fibre Optic Cable version 2017 Empowering businesses through innovative network solutions. We have been pushing boundaries and providing innovative products and solutions to clients around

More information

FREEDM Loose Tube Interlocking Armored Cables

FREEDM Loose Tube Interlocking Armored Cables features and benefits Flexible, interlocking armor design Gel-free waterblocking technology Color-coded tubes and fibers UV-resistant, flameretardant jacket UV-Resistant Flame-Retardant Outer Jacket InterlockingArmor

More information

Product Catalogue. Fiber Optic Assemblies & Adapters. Table of Contents General Description... 2

Product Catalogue. Fiber Optic Assemblies & Adapters. Table of Contents General Description... 2 Product Catalogue Fiber Optic Assemblies & Adapters Table of Contents 1. General Description... 2 2. Connectors... 3 2.1 SC/UPC... 3 2.2 SC/APC... 3 2.3 FC/UPC... 3 2.4 FC/APC... 3 2.5 ST/UPC... 3 2.6

More information

Empowering businesses through innovative network solutions.

Empowering businesses through innovative network solutions. Empowering businesses through innovative network solutions. We have been pushing boundaries and providing innovative products and solutions to clients around the world for nearly two decades. Our experience

More information

SPECIFICATION 192F SM LOOSE TUBE, DRY CORE MINI CABLE

SPECIFICATION 192F SM LOOSE TUBE, DRY CORE MINI CABLE Revision No.:00 Date: 08.03.2010 SPECIFICATION OF 192F SM LOOSE TUBE, DRY CORE MINI CABLE PART NO.:D-192/SM/MTY(F)-MFN-O9.1 Checked By: Pavan Maheshwari Process Associate Design & Development Team Approved

More information

Optical Fibre Cable Technical Specification. Duct Cable GYFTY-24,48,72,144,216B1.3

Optical Fibre Cable Technical Specification. Duct Cable GYFTY-24,48,72,144,216B1.3 Version GYFTY-V1.0 Optical Fibre Cable Technical Specification Duct Cable GYFTY-24,48,72,144,216B1.3 Yangtze Optical Fibre and Cable Joint Stock Limited Company All rights reserved 1. Scope This Specification

More information

UC FIBRE Optical Fibre Cable a fast, reliable and always available part of the Draka Datacom Solution. Be ready for the future: Draka Datacom Solution

UC FIBRE Optical Fibre Cable a fast, reliable and always available part of the Draka Datacom Solution. Be ready for the future: Draka Datacom Solution Be ready for the future: Draka Datacom Solution Modern networks face stiff demands. They must be fast and reliable, resist fire and not interfere with other equipment. Optical Fibre Cable a fast, reliable

More information

HES HACILAR ELEKTRİK SANAYİ VE TİC.A.Ş.

HES HACILAR ELEKTRİK SANAYİ VE TİC.A.Ş. Technical Specification Revision/Date: 04/04.15 By N.KARAAĞAÇ Date : 27 February 2015 Cable Type HES Cable Product Number :, Outdoor F/O Cable :FOZZXXXSJSA41JYY (ZZ: fiber type G652=SD, G657 A1 = A1, G657

More information

SPECIFICATION 96F SM LOOSE TUBE, DRY CORE MINI CABLE

SPECIFICATION 96F SM LOOSE TUBE, DRY CORE MINI CABLE Revision No.:01 Date: 07.10.06 SPECIFICATION OF 96F SM LOOSE TUBE, DRY CORE MINI CABLE PART NO.:D-96/SM/MTY(F)-MFN-O6.3 Checked By: Pavan Maheshwari Process Associate Design & Development Team Approved

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION ISSUED : OCT. 02, 2006 PAGE : 1 OF 9 REV. : 1 TECHNICAL SPECIFICATION FOR GST 2006-043A LOOSE TUBE DRY CORE CABLE SINGLE JACKET/SINGLE ARMOR (SJSA CABLE) Prepared By : Oh-Heoung Kwon Engineer Optical Technical

More information

GBRE. Multi Loose Tube Cables Outdoor A-DQ(ZN)B2Y Improved Rodent Protection. Ordering Information. Applications. Features & Benefits

GBRE. Multi Loose Tube Cables Outdoor A-DQ(ZN)B2Y Improved Rodent Protection. Ordering Information. Applications. Features & Benefits GBRE Multi Loose Tube Cables Outdoor A-DQ(ZN)B2Y Improved Rodent Protection Ordering Information Belden European Part Numbers Fibre type / count 84 96 62.5/125-OM1 GBRE184 GBRE196 -OM2 BW /1200 GBRE284

More information

Detailed Specifications & Technical Data

Detailed Specifications & Technical Data For more information please call 1-800-Belden1 See Put-ups and Colors Related Documents: No.10 for Fiber Optic Cables.pdf Cable Characteristics: DESCRIPTION: 2 to 12 optical fibers, Central gel filling

More information

Micro duct Cable with HDPE Sheath for Installation by Blowing

Micro duct Cable with HDPE Sheath for Installation by Blowing Optical Fiber Cable Technology Specification INTERNAL Optical Fiber Cable Specification Micro duct Cable with HDPE Sheath for Installation by Blowing GCYFY-12/24/36/48/72/96/144/288/432/576B1.3 V7.0 2018-3-20,CCopyright.

More information

OPTICAL FIBRE CABLE NETWORK 2004/1

OPTICAL FIBRE CABLE NETWORK 2004/1 OPTICAL FIBRE CABLE NETWORK 2004/1 HELKAMA OPTICAL FIBRE CABLES Cabled optical fibre characteristics OS1 singlemode fibre SM ITU-T G.652 Mode field diameter 1310nm 9.3+/-0.5µm Mode field eccentricity 1.0

More information

SPECIAL SPECIFICATION 2284 Fiber Optic Cable (Self-Supporting)

SPECIAL SPECIFICATION 2284 Fiber Optic Cable (Self-Supporting) 2004 Specifications CSJ 0086-14-046 SPECIAL SPECIFICATION 2284 Fiber Optic Cable (Self-Supporting) 1. Description. Furnish, install, splice, field terminate, and test the fiber optic cables. 2. Materials.

More information

SECTION 4 TABLE OF CONTENTS

SECTION 4 TABLE OF CONTENTS Contents Introduction LC, SC and ST Series...4-2 Markets and Applications...4-2 International Standard Documents Compliance...4-2 LC Series Features and Benefits...4-3 LC Standard... 4-4 to 4-5 LC for

More information

Delaware County Community College Project # Marple Campus Renovation - Phase % Construction Documents November 23, 2011

Delaware County Community College Project # Marple Campus Renovation - Phase % Construction Documents November 23, 2011 SECTION 271323 - COMMUNICATIONS OPTICAL FIBER BACKBONE CABLING PART 1 - GENERAL 1.1 DESCRIPTION A. This section provides the specifications for the work related to the optical fiber system in the project.

More information

1. General. 1. Scope. 2. Quality Assurance

1. General. 1. Scope. 2. Quality Assurance 1. General 1. Scope 2. Quality Assurance This specification covers the construction and properties of 50/125 um Multimode (Graded-index, OM2), anti-rodent self-supporting (ARSS), single jacket, single

More information

Fiber Optics Redefined

Fiber Optics Redefined Fiber Optics Redefined Questions and Answers on the basics of fiber optic installation TECHLOGIX NETWORX Questions & Answers Questions and Answers Q: What are the two main types of fiber? A: The two main

More information

Mining and Petrochemical Fiber Optic Cables

Mining and Petrochemical Fiber Optic Cables Features and Benefits Loose construction Stable and highly reliable transmission parameters Waterblocking technology Allows efficient and craft-friendly cable preparation in outdoor or indoor/outdoor applications

More information

SPECIAL SPECIFICATION 6191 Fiber Optic Cable

SPECIAL SPECIFICATION 6191 Fiber Optic Cable 2004 Specifications CSJ 0014-02-014, etc SPECIAL SPECIFICATION 6191 Fiber Optic Cable 1. Description. Furnish, install, splice, field terminate, and test the fiber optic cables. 2. Materials. A. General

More information

Spec No.: ZTT Revision: 2 Date: Oct 3, Designer. Senior Technical Manager. Approver. Chief Technical Engineer

Spec No.: ZTT Revision: 2 Date: Oct 3, Designer. Senior Technical Manager. Approver. Chief Technical Engineer Spec No.: ZTT 45012 Revision: 2 Date: Oct 3, 2014 TECHNICAL SPECIFICATION Optical Fiber Cable (Reference: NBR 14566) Designer Senior Technical Manager Approver Chief Technical Engineer Jiangsu Zhongtian

More information

SPECIFICATION. Optical Fiber Cable

SPECIFICATION. Optical Fiber Cable SPECIFICATION Optical Fiber Cable (GYFS) Prepared by Zhang xin Approved by Yin peng xiang 1 1 Product description GYFS is gel-free, single-jacket, single-armored cable for direct burial and duct GYFS is

More information

MT-RJ SECURE Product Expansion Now 10 Variants of the MT-RJ SECURE Products

MT-RJ SECURE Product Expansion Now 10 Variants of the MT-RJ SECURE Products MT-RJ Product Expansion Now 0 Variants of the MT-RJ Products In response to several customers, the MT-RJ product line has been expanded with an additional six color/key versions. In addition to the original

More information

SOLO ADSS Short-Span Cables, Fibers

SOLO ADSS Short-Span Cables, Fibers features and benefits Loose tube design Self-supporting Track-resistant jacket available Innovative waterblocking cable core SOLO ADSS Cable Drawing ZA-2615 Stable performance and compatibility with all

More information

Sumitomo Cable Specification SE-*RU. OFNP Rated Central Tube Cable with Optical Fibers. Issued: December 2014

Sumitomo Cable Specification SE-*RU. OFNP Rated Central Tube Cable with Optical Fibers. Issued: December 2014 Sumitomo Cable Specification SE-*RU Litepipe Ribbon Indoor Plenum Cable OFNP Rated Central Tube Cable with 12-432 Optical Fibers Issued: December 2014 78 Alexander Drive, Research Triangle Park, NC 27709

More information

LD Series High Performance Loose Tube Fiberoptic Cables

LD Series High Performance Loose Tube Fiberoptic Cables Fiberoptic Cables Catalog LD Series High Performance Loose Tube Fiberoptic Cables APPLICATIONS Long-distance outside plant telephone, CATV as well as data communications Direct burial and installation

More information

Ø 1000 * 588 mm 50 kg

Ø 1000 * 588 mm 50 kg GOCN Central Loose Tube Cables Outdoor Corrugated Steel Tape Armor (CST) A-DQ(ZN)(SR)2Y Full Rodent Protection Ordering Information Belden European Part Numbers Fibre type / count 4 6 8 12 16 24 62.5/125-OM1

More information

Number of Fiber 6 Core 12 Core. Part Number

Number of Fiber 6 Core 12 Core. Part Number Order Information OUTDOOR OFC-Drop Wire, MM (OM2) (50/125) LOOSE TUBE BLACK Number of Fiber 6 Core 12 Core Part Number 74550006 74550012 1. General 1. Scope 2. Quality Assurance This specification covers

More information

Number of Fiber 6 Core 12 Core 24 Core 48 Core

Number of Fiber 6 Core 12 Core 24 Core 48 Core Order Information OUTDOOR OFC-ADSS-MM (OM3, 50/125) LOOSE TUBE-BLACK Number of Fiber 6 Core 12 Core 24 Core 48 Core Part Number 74060006 74060012 74060024 74060048 1. General 1. Scope This specification

More information

Number of Fiber 12 Core 24 Core 48 Core. Part Number

Number of Fiber 12 Core 24 Core 48 Core. Part Number Order Information OUTDOOR OFC-FIG.8, MM (OM2), (50/125) LOOSE TUBE BLACK 1. General 1. Scope 2. Quality Assurance Number of Fiber 12 Core 24 Core 48 Core Part Number 63460012 63460024 63460048 This specification

More information

FIBRE OPTIC CABLE SOLUTIONS

FIBRE OPTIC CABLE SOLUTIONS point2point FIBRE OPTIC CABLE SOLUTIONS Introduction From patch-leads through to cross-site cables, or optical adapters through to patch panels, PPM s one-stopshop approach to fibre optic cable management

More information

FIBER OPTIC CABLE CUT TO YOUR EXACT SPECS TO SAVE YOU TIME AND MONEY

FIBER OPTIC CABLE CUT TO YOUR EXACT SPECS TO SAVE YOU TIME AND MONEY FIBER OPTIC CABLE CUT TO YOUR EXACT SPECS TO SAVE YOU TIME AND MONEY ADVANTAGES OF FIBER OPTIC CABLE Fiber optic cable is the preferred choice for backbone and horizontal applications. Black Box provides

More information

Enterprise Networks. Comms Room and Backbone. in DETAIL

Enterprise Networks. Comms Room and Backbone. in DETAIL Enterprise Networks Comms Room and Backbone in DETAIL 31 Patch Panels 33 CAT 6 CL 16 WAY PATCH PANEL 19 1U Category 6 performance patch panel. Jacks are fitted. Integral cable management and reusable label

More information

Compact Module. Category 6 FTP Cabling System

Compact Module. Category 6 FTP Cabling System Compact Module Shielded design for improved EMI performance Suitable for Gigabit Ethernet applications and beyond Ultra-slimline design Colour coded for quick and accurate termination Interchangeable with

More information

Empowering businesses through innovative network solutions.

Empowering businesses through innovative network solutions. Empowering businesses through innovative network solutions. We have been pushing boundaries and providing innovative products and solutions to clients around the world for nearly two decades. Our experience

More information

GUWN. Central Loose Tube Cables Universal Indoor/Outdoor, Steel Wire Armor (SWA) A/I-DQ(ZN)HBH Full Rodent Protection. Ordering Information

GUWN. Central Loose Tube Cables Universal Indoor/Outdoor, Steel Wire Armor (SWA) A/I-DQ(ZN)HBH Full Rodent Protection. Ordering Information GUWN Central Loose Tube Cables Universal Indoor/Outdoor, Steel Wire Armor (SWA) A/I-DQ(ZN)HBH Full Rodent Protection Ordering Information Belden European Part Numbers Fibre type / count 4 6 8 12 16 24

More information

Introduction to Fiber Optic Cable Technology Jerry Bednarczyk, PE Course Content

Introduction to Fiber Optic Cable Technology Jerry Bednarczyk, PE Course Content Introduction to Fiber Optic Cable Technology Jerry Bednarczyk, PE Course Content Page 1 of 10 GENERAL A fiber optic cable system is very similar to a copper wire system in that it is used to transmit data

More information

SPECIAL SPECIFICATION 8540 Telecommunication Cable

SPECIAL SPECIFICATION 8540 Telecommunication Cable 2004 Specifications CSJ 0914-00-307 & CSJ 0914-25-003 SPECIAL SPECIFICATION 8540 Telecommunication Cable 1. Description. This specification governs the materials, installation, termination, splicing, testing,

More information

Sumitomo Cable Specification SE-*DB. 100% Dry - Armored Central Tube Ribbon Cable with Fibers. Issued: January 2014

Sumitomo Cable Specification SE-*DB. 100% Dry - Armored Central Tube Ribbon Cable with Fibers. Issued: January 2014 Sumitomo Cable Specification SE-*DB DriTube Ribbon / Armorlux Sheath Cable 100% Dry - Armored Central Tube Ribbon Cable with 12-576 Fibers Issued: January 2014 78 Alexander Drive, Research Triangle Park,

More information

GUXT. Mini-Breakout Cables (Distribution) Universal Indoor/ Outdoor A/I-VQ(ZN)BH Improved Rodent Protection. Ordering Information.

GUXT. Mini-Breakout Cables (Distribution) Universal Indoor/ Outdoor A/I-VQ(ZN)BH Improved Rodent Protection. Ordering Information. GUXT Mini-Breakout Cables (Distribution) Universal Indoor/ Outdoor A/I-VQ(ZN)BH Improved Rodent Protection Ordering Information Belden European Part Numbers Fibre type / count 4 6 8 12 16 24 62.5/125-OM1

More information

SPECIAL SPECIFICATION 6559 Telecommunication Cable

SPECIAL SPECIFICATION 6559 Telecommunication Cable 2004 Specifications CSJ 0015-09-147, etc. SPECIAL SPECIFICATION 6559 Telecommunication Cable 1. Description. This specification governs the materials, installation, termination, splicing, testing, training,

More information

Connectix Cabling Systems

Connectix Cabling Systems Connectix Cabling Systems Cabling Standards and CPR Update Connectix CEP Fibre Optic Solutions Jason Holroyd CNID Director of Business Development Types of fibre Agenda Introduction Uses Construction Transmission

More information

HI-DEX PRODUCT SET DATASHEET

HI-DEX PRODUCT SET DATASHEET APPLICATION HI-DEX is an ultra high-performance, pre-terminated and modular optical fibre cabling system based on MT ferrule connector technology. This product set is designed for installationn in the

More information

HITRONIC Optical Transmission Cable

HITRONIC Optical Transmission Cable HITRONIC Optical Transmission Cable POF - Polymer Optical Fiber 263 PCF - Plastic-Clad Fiber 267 GOF - Glass Optical Fiber 269 HITRONIC Optical Transmission Cable OPTICAL TRANSMISSION CABLE POF - Polymer

More information

GYFTY TECHNICAL SPECIFICATIONS FOR GYFTY CABLE

GYFTY TECHNICAL SPECIFICATIONS FOR GYFTY CABLE TECHNICAL SPECIFICATIONS FOR GYFTY CABLE 1 1. Product Description This specification covers the general requirements and performance of cable, which FOC offered including optical characteristics, mechanical

More information

TENDER SUMMARY. Tender Title:

TENDER SUMMARY. Tender Title: TENDER SUMMARY Tender Title: Tender Ref: Closing Date: OPEN TENDER FOR THE SUPPLY OF FIBER OPTIC CABLE 384 CORE LOOSE TUBE ( FOC 384C ) FOR TELEKOM MALAYSIA BERHAD ( TM ) LPM/2018/T/02/FOC 384C 23 February

More information

Preferred ordering guide for NETCONNECT

Preferred ordering guide for NETCONNECT Preferred ordering guide for NETCONNECT MEA Region Contents Copper solutions Category 6A products 3 Category 6A and Category 7 shielded copper cables 3 Category 6A modular shielded panels 3 Category 6A

More information

Fibre Optic Cable & Connector Guide

Fibre Optic Cable & Connector Guide Fibre Optic Cable & Connector Guide White paper White Paper Fibre Optic Cable & Connector Guide v1.0 EN 1 Introduction Organising through cables and connectivity options can be an exasperating exercise.

More information

Cable Installation Tips

Cable Installation Tips Cable Installation Tips Campus Network Design & Operations Workshop These materials are licensed under the Creative Commons Attribution-NonCommercial 4.0 International license (http://creativecommons.org/licenses/by-nc/4.0/)

More information

Sumitomo Cable Specification SE-*RD. All-Dielectric Ribbon Cable with Fibers. Issued: April 2014

Sumitomo Cable Specification SE-*RD. All-Dielectric Ribbon Cable with Fibers. Issued: April 2014 Sumitomo Cable Specification SE-*RD Litepipe Ribbon / ADS Sheath Cable All-Dielectric Ribbon Cable with 12-864 Fibers Issued: April 2014 78 Alexander Drive, Research Triangle Park, NC 27709 Phone (919)

More information

STRUCTURED CABLING SYSTEMS (SCS)

STRUCTURED CABLING SYSTEMS (SCS) STRUCTURED CABLING SYSTEMS (SCS) ModSecur - Structured Cabling Systems (SCS) A Structured Cabling System (SCS) is the backbone of any building, campus or site communication infrastructure. The sharp growth

More information

Description: Pair Color Code Chart: Pair Color Chart 1 Brown White Brown 2 Orange White Orange 3 Green White Green 4 Blue White Blue.

Description: Pair Color Code Chart: Pair Color Chart 1 Brown White Brown 2 Orange White Orange 3 Green White Green 4 Blue White Blue. Description: OZLINX CAT5e cable has a guaranteed performance; exceeds the Category 5e performance requirements and provides positive PSACR up to 155MHz for bandwidth requirement in the future. Product

More information

Product information. OpDAT VIK with breakout cable. Product description. Illustrations. Page 1/7

Product information. OpDAT VIK with breakout cable. Product description. Illustrations. Page 1/7 Page /7 Illustrations Product description Pre-terminated installation cables (VIK) are fiber optic cables with connectors on one or both ends that are made in manual singleitem production at METZ CONNECT

More information

Public Works Division Lighting District Fiber Optic Specifications April 2009

Public Works Division Lighting District Fiber Optic Specifications April 2009 Public Works Division Lighting District Fiber Optic Specifications April 2009 7000 Florida Street Punta Gorda, Florida 33950 Tele: 941.575.3600 Fax : 941.637.9265 www.charlottecountyfl.com/publicworks

More information

1. Scope OUTDOOR OFC-ADSS, SM(0.9) LOOSE TUBE BLACK

1. Scope OUTDOOR OFC-ADSS, SM(0.9) LOOSE TUBE BLACK 1. General 1. Scope OUTDOOR OFC-ADSS, SM(0.9) LOOSE TUBE BLACK 2. Quality Assurance This specification covers the construction and properties of all-dielectric selfsupporting (ADSS), single jacket, dry

More information

Cable Jacket - The outermost layer of the fiber cable. Application: Types Single mode Multi mode. Simplex or Duplex available

Cable Jacket - The outermost layer of the fiber cable. Application: Types Single mode Multi mode. Simplex or Duplex available Fiber Optic Products FIBER OPTIC PRODUCTS FIBER OPTIC PATCH CORD CABLE The Construction of a Fiber-Optic Cable Cable Jacket - The outermost layer of the fiber cable. Strengthening fibers - The strengthening

More information

FIBER OPTIC CABLES. Models GYXTC-8SS GJFJV

FIBER OPTIC CABLES. Models GYXTC-8SS GJFJV FIBER OPTIC CABLES ASTEL offers an innovative and wide range of Optical Fiber Cables from 4 Fiber to 144 Fibers for broadband networks. ASTEL offers variety of models from Uni-Tube construction, to Stranded

More information

Our cables at: ATHENS AIRPORT PIRAEUS PORT TUNNEL IN PARIS NATIONAL PETROLEUM OIL COMPANY

Our cables at: ATHENS AIRPORT PIRAEUS PORT TUNNEL IN PARIS NATIONAL PETROLEUM OIL COMPANY Our cables at: ATHENS AIRPORT PIRAEUS PORT TUNNEL IN PARIS NATIONAL PETROLEUM OIL COMPANY - SYMBOLS AND THE MEANING OF THE SYMBOLS FOR FIBRE OPTIC CABLES - SINGLE LOOSE TUBE, SINGLE SHEATH, NON METALLIC

More information

Follow The Leader In Shielded Technology

Follow The Leader In Shielded Technology 1970s Vampire Tap 1990s Shielded Modular Jack 190s 4 Position Data Connector Follow The Leader In Shielded Technology The new AMP-TWIST Jack is our latest shielded product evolution. It can be terminated

More information

Pre-bid Supplement #01 Communications Specifications and Additional Scope Project Bid: CM Date: 05/26/2017

Pre-bid Supplement #01 Communications Specifications and Additional Scope Project Bid: CM Date: 05/26/2017 Pre-bid Supplement #01 Communications Specifications and Additional Scope Project Bid: CM-2017-2 Date: 05/26/2017 Additional specification information for data communication to cameras and between Library

More information

To select a fibre optic cable, you have to make choices of the fibre selection and the cable construction selection.

To select a fibre optic cable, you have to make choices of the fibre selection and the cable construction selection. Fibre Optic Cables & Connectors Guide Introduction Organising through cables and connectivity options can be an exasperating exercise. It's tough enough working through the categories and levels of copper

More information

Cable Installation Tips

Cable Installation Tips Cable Installation Tips Campus Network Design & Operations Workshop These materials are licensed under the Creative Commons Attribution-NonCommercial 4.0 International license (http://creativecommons.org/licenses/by-nc/4.0/)

More information

Introduction to Fibre Optics

Introduction to Fibre Optics Introduction to Fibre Optics White paper White Paper Introduction to Fibre Optics v1.0 EN 1 Introduction In today s networks, it is almost impossible to find a network professional who has never been in

More information

Optical Distribution Box 300 Installation Guide. Version : R0.0

Optical Distribution Box 300 Installation Guide. Version : R0.0 Optical Distribution Box 300 Installation Guide Document No. : OD16-546-L-01 Version : R0.0 Date: 21-Mar-2018 IMPORTANT INSTRUCTIONS When using fiber optic equipment, basic precautions should always be

More information

OPTICAL CHARACTERISTICS (applied to 12c MPO/MTP ) Item Parameter Reference

OPTICAL CHARACTERISTICS (applied to 12c MPO/MTP ) Item Parameter Reference MPO/MTP TRUNK CABLE FEATURES MTP (US Conec) brand or MPO standard compliant multifiber connector Connector's design complies with IEC 61754-7 standards 4, 8, 12 and 24-fiber with single mode and multimode

More information

SPECIFICATION FIBER OPTIC SPLICE CLOSURE. Spec No : VSS-1007-BS403A-04A/SD. VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division

SPECIFICATION FIBER OPTIC SPLICE CLOSURE. Spec No : VSS-1007-BS403A-04A/SD. VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division SPECIFICATION FIBER OPTIC SPLICE CLOSURE Model Spec. No. Distribution Depts. VSOF-BS403A VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division Sales Division Management Division Revision 10. 07 (Rev.4)

More information

SINGLE MODE OPTICAL FIBER CABLE SPECIFICATION (ARSS)

SINGLE MODE OPTICAL FIBER CABLE SPECIFICATION (ARSS) SINGLE MODE OPTICAL FIBER CABLE SPECIFICATION (ARSS) No. FT-S16274 Version: A (ITU-T Rec. G.652.D) Futong Group Communication Technology (Thailand) Co., Ltd. All Right Reserved Add: No.7/324, Moo 6, T.Mabyangporn

More information

Selection of a cable depends on functions such as The material Singlemode or multimode Step or graded index Wave length of the transmitter

Selection of a cable depends on functions such as The material Singlemode or multimode Step or graded index Wave length of the transmitter Fibre Optic Communications The greatest advantage of fibre cable is that it is completely insensitive to electrical and magnetic disturbances. It is therefore ideal for harsh industrial environments. It

More information

CATEGORY 6 CABLING SOLUTIONS

CATEGORY 6 CABLING SOLUTIONS With over 20 years experience and know-how on communicating products design & developing, Premium Line has built maturity systems both in high tech develop and research center & complete structural quality

More information

CATEGORY 5e CABLING SOLUTIONS

CATEGORY 5e CABLING SOLUTIONS With the high speed data transmission requirement in LAN, 1998 IEEE ratified standard 802.3z defined protocol 1000BASE-T over Category 5e and higher level Ethernet cabling system. After that, with the

More information

LTX Optical Distribution Panels. Ordering Guide

LTX Optical Distribution Panels. Ordering Guide Contents LTX Optical Distribution Panels... 1... 1 Section One: LTX Overview... 3 1RU and 2RU Panels... 3 4RU Panels... 3 Patch Panels... 3 Combination Panels Patch and Splice... 4 Section Two: Unloaded

More information

The World Of Professional Fiber Optics. safe flexible reliable

The World Of Professional Fiber Optics. safe flexible reliable The World Of Professional Fiber Optics safe flexible reliable CONTENTS Contents General Info.... 3 2-Channel System.... 6 4-Channel System.... 10 SMPTE System.... 15 Patchcords.... 19 Accessories.... 21

More information

1993 Specifications CSJ SPECIAL SPECIFICATION ITEM Fiber Optic Cable System

1993 Specifications CSJ SPECIAL SPECIFICATION ITEM Fiber Optic Cable System 1993 Specifications CSJ 0008-12-071 SPECIAL SPECIFICATION ITEM 6540 Fiber Optic Cable System 1.0 Description. This item shall govern for the furnishing and installation of fiber optic cables in designated

More information

FTTH & FITH. Discreet optical fiber solutions from the network connection point to the set-top box.

FTTH & FITH. Discreet optical fiber solutions from the network connection point to the set-top box. FTTH & FITH Discreet optical fiber solutions from the network connection point to the set-top box www.omelcom.com FIBER: THE FUTURE IS HERE The past several years have seen major progress in the penetration

More information

PREMIUM 5e F/UTP PRODUCTS

PREMIUM 5e F/UTP PRODUCTS Siemon s end-to-end cabling system is guaranteed to provide transmission performance margins in excess of industry standards for category 5e parameters, while featuring excellent EMI resistance. has been

More information

TELECOM SOLUTIONS SOLUTIONS CATALOGUE INNOVATIVE FIBRE OPTIC CABLE SOLUTIONS

TELECOM SOLUTIONS SOLUTIONS CATALOGUE INNOVATIVE FIBRE OPTIC CABLE SOLUTIONS TELECOM SOLUTIONS SOLUTIONS CATALOGUE INNOVATIVE FIBRE OPTIC CABLE SOLUTIONS TKF TECHNOLOGICAL LEADERSHIP IN CONNECTIVITY SOLUTIONS Since its establishment in 1930 TKF developed from a cable producer to

More information

RFP LC Uniboot to RFP LC Uniboot Patch cord, 2 fibres, Interconnect tight-buffered cable, LSZH

RFP LC Uniboot to RFP LC Uniboot Patch cord, 2 fibres, Interconnect tight-buffered cable, LSZH 1 1 9.41 115 0 Pretium EDGE 143 RFP LC Uniboot to RFP LC Uniboot Patch Pretium EDGE Solutions jumpers are integrated reverse -polarity uniboot duplex assemblies that meet the high -density space requirements

More information

DOME OPTIC SPLICE CLOSURE

DOME OPTIC SPLICE CLOSURE FIBER OPTIC SPIICE CLOSURE GJS-JKDH1001-120 BOX DIMENSION: W=140mm H=340mm Weight = 1.80 kgs Outer Internal structure Fuse fiber disc Type sealing ring Plastic hoop base Pole Mount Pole Mount 1 1. product

More information

OPTICAL FIBRE CABLES. for very-high bit transmission and FTTx networks

OPTICAL FIBRE CABLES. for very-high bit transmission and FTTx networks OPTICAL FIBRE CABLES for very-high bit transmission and FTTx networks OPTICAL FIBRE CABLES SILEC CABLE REFERENCES AND KNOW-HOW Since 1983, Silec Cable has successfully supplied the major telecom operators,

More information

Triax TechInfo. Installing and pulling Fibre Optic cables

Triax TechInfo. Installing and pulling Fibre Optic cables Installation methods for both wire cables and Fibre Optical cables are similar. Fibre cable can be pulled with much greater force than copper wire if you pull it correctly. Just remember these rules: 1)

More information

CATEGORY 6A CABLING SOLUTIONS

CATEGORY 6A CABLING SOLUTIONS 10 Gigabit Ethernet is nowadays viable solution for destinations with very high data traffic concentration like data center, server farms, MAN s and backbones. Premium Line Category 6A Cabling Solutions

More information

Best Friends General Trading FZE

Best Friends General Trading FZE Welcome to Best Friends General Trading FZE Tel. +97 1 50-5426 202, Fax. +971 6 7407428, info@bestfgt.com, besttrd@eim.ae Infrastructure Product Guide Best fgt is UAE based company, operational for last

More information

RFP LC Uniboot to RFP LC Uniboot Patch cord, 2 fibres, Interconnect tight-buffered cable, LSZH

RFP LC Uniboot to RFP LC Uniboot Patch cord, 2 fibres, Interconnect tight-buffered cable, LSZH 1 1 9.41 115 0 Pretium EDGE 143 RFP LC Uniboot to RFP LC Uniboot Patch Pretium EDGE Solutions jumpers are integrated reverse -polarity uniboot duplex assemblies that meet the high -density space requirements

More information

Customer-Owned Outside Plant

Customer-Owned Outside Plant Customer Premises Products (Enterprise) 3 Customer-Owned Outside Plant Fiber Optic Splice Case 2178 Series and Accessories 372 Fiber Optic Dome Splice Closure FD Series 376 Fibrlok II Universal Optical

More information

Product Classification. Dimensions. Environmental Specifications. General Specifications. Material Specifications. Mechanical Specifications

Product Classification. Dimensions. Environmental Specifications. General Specifications. Material Specifications. Mechanical Specifications E2O540JCASS-12CT MICFIBR-12.7MB MICFIBR-12.7MB DUCT DUCT E2O540JCASS- Product Classification Brand E 2 O E 2 O Coaxial/Fiber/Microduct Hybrid Buried Cable E O is a solution that enables service providers

More information

OPTICAL CABLE FIBER-LAN INDOOR

OPTICAL CABLE FIBER-LAN INDOOR OPTICAL CABLE FIBER-LAN INDOOR Product Type Optic Cable Construction RoHS-2 Compliant Dielectric Tight Buffer Singlemode or Multimode Description Optical cable with singlemode or multimode optical fibers

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION (FIBER OPTIC SPLICE CLOSURE) Model Spec. No. Distribution Depts. VSOF-BS403A SJP-0609-403A-01A/SD Quality Assurance Team Manufacturing Division Sales Division Management Division

More information

1. Scope OUTDOOR OFC-DW-(Twisted), SM (0.9) LOOSE TUBE BLACK

1. Scope OUTDOOR OFC-DW-(Twisted), SM (0.9) LOOSE TUBE BLACK 1. General 1. Scope OUTDOOR OFC-DW-(Twisted), SM (0.9) LOOSE TUBE BLACK 2. Quality Assurance This specification covers the construction and properties of optical fiber three tubes stranded, dry core fiber

More information

Special Specification 6242 Special Fiber Optic Cable

Special Specification 6242 Special Fiber Optic Cable Special Specification 6242 Special Fiber Optic Cable 1. DESCRIPTION 2. MATERIALS The contractor to install, splice, field terminate, test and document all fiber systems. A. General Requirements. Provide

More information

Non-metallic Aerial Distribution Optical Cables for FTTH Networks

Non-metallic Aerial Distribution Optical Cables for FTTH Networks Non-metallic Aerial Distribution Optical Cables for FTTH Networks Go Taki, 1 Akira Namazue, 1 and Ken Osato 1 One of the common practices to construct economical and efficient Fiber To The Home (FTTH)

More information

Connectivity accessories by Nestor Cables

Connectivity accessories by Nestor Cables Connectivity accessories by Nestor Cables NesCon product family includes essential installation and connection accessories for fibre optic networks, from ODFs to joint closures and terminations. www.nestorcables.com

More information

HighBand 25. TrueNet Category 6 Solutions

HighBand 25. TrueNet Category 6 Solutions HighBand 25 TrueNet Category 6 Solutions The highest performing cross-connect system in the world. A unique high-density solution with superior cable management. ADC KRONE s HighBand 25 cross connect solution

More information

INDUSTRY SOLUTIONS: MINING

INDUSTRY SOLUTIONS: MINING INDUSTRY SOLUTIONS: MINING MS 2 INDUSTRY SOLUTIONS: MINING Optical Cable Corporation is built on a tradition of innovation and dependability. In the early 1980s, Optical Cable Corporation was a pioneer

More information

HARTING Ethernet cabling cables and connectors, 4 wire

HARTING Ethernet cabling cables and connectors, 4 wire Industrial Cat. 5e Standard cable, 4-wire Type A for permanent installation or to build-up PROFINET system cables PVC X 8 wire X Cat. 5e X Cat. 6 Cat. 6 A Cat. 7 Cable structure Core structure Wire insulation

More information

for FOSTEC INC. 1/ 15

for FOSTEC INC. 1/ 15 TECHNICAL SPECIFICATION for OPTICAL FIBER PATCH CORD / PIGTAIL FOSTEC / 5 . Scope: This specification is applicable to optical fiber patch cord, pigtail and with w optical connectors. The pigtail is single

More information