Setup Guide. Klein K-10CP Colorimeter. Rev. 1.1
|
|
|
- Howard Dennis
- 6 years ago
- Views:
Transcription
1 Setup Guide Klein K-10CP Colorimeter Rev. 1.1
2 Introduction Klein K-10CP Included Parts The K-10CP (Cinema Pro) is a reference class non-contact optical colorimeter with superb accuracy, the fastest read times available, superior performance at low light, and extremely high light level measurement capability ( to 10,000 cd/m²). The K-10CP is unmatched in sensitivity, stability, and speed. The rubber lens hood (Figure 1) is to be used with the K-10CP, or together with the extension tube (Figure 2), to make screen contact when measuring a flat panel display. Figure 1. K-10CP rubber lens hood. Figure 2. K-10CP extension tube. The cosine diffuser (Figure 3) is to be used with the K-10CP when pointed directly at a projector, for illuminance measurements. Figure 3. K10-A cosine diffuser. 2
3 Klein K-10CP Device Driver The Klein K-10CP uses the FTDI device driver. Included in CalMAN Device Driver Pack 2.4: Or, single FTDI device driver: Device Driver Install 1. Install the CalMAN Device Driver Kit v Plug the Klein K-10CP into a USB port on your computer. Windows should automatically detect the K-10CP device driver, if you have installed the CalMAN Device Driver Kit. If the device driver does not install properly: 1. Right click on Computer/My Computer and select Properties. Or, go to the Control Panel and open Device Manager. 2. Open Device Manager. In the menu tree, you will see a USB serial device that is not working properly (yellow exclamation mark). 3. Right-click on the conflicted device and select Update Driver. Select Install From A Specific Location, then browse to the FTDI folder in the C:\Program Files (x86)\spectracal\drivers directory. It may ask you to install the driver twice; this is normal. Go through the same process and the same location for the driver. Meter Positioning Flat Panels / Rear Projectors The K-10CP ships with a rubber lens hood that can be used to position the K- 10CP right up against a display screen. The soft rubber hood will not damage the screen. Because it blocks all ambient light, the lens hood makes the K- 10CP ideal for measuring reflective displays such as plasmas. Front Projectors The K-10CP should be placed along the line of sight from the main/central viewing location, pointed at the center of the projector screen. In other words, the K-10CP should measure the screen from the same angle that the screen is normally viewed. The K-10CP should be placed close enough to the screen so that its measurement area is contained entirely within the screen test pattern area. This can be determined by enabling the meter LED pointers. 3
4 CalMAN Connection to Klein K-10CP CalMAN Required Version Any CalMAN version is acceptable CalMAN Connection Procedure CalMAN Meter Settings To connect CalMAN to the Klein K-10CP meter. 1. On the Meter Settings tab, click Find Meter. 2. On the Find Meters popup dialog: a. Select the Com Port associated with the K-10CP in Device Manager, under Ports (COM & LPT). b. Enable the Klein Instruments meters (RS-232, USB) search option. c. Click Search Meter Mode (Target Display Type) Select the Meter Mode that corresponds to the display backlight/pixel technology that you wish to measure or calibrate. LCD Direct View LCD Direct View (LED Backlight) OLED Direct View CRT Direct View Plasma Rear Projector (CRT) Rear Projector (UHP) Front Projector facing projector (CRT) Front Projector facing screen (CRT) Front Projector facing projector (UHP) Front Projector facing screen (UHP) Front Projector facing screen (LED) Ambient Light 4
5 Standard Exposure Modes Low Light Handler 1 Sample (default) 3 Samples (simple avg) 5 Samples (simple avg) 10 Samples (std deviation avg) 20 Samples (std deviation avg) 30 Samples (std deviation avg) 50 Samples (std deviation avg) When enabled, averages multiple meter samples per measurement, when measuring light levels below the specified Low Light Trigger level. 5
6 About / Contact About Portrait Displays Portrait Displays, Inc., since 1993, is a leading application software provider (ASP) for PC, smartphone, and tablet displays. The Portrait Displays team now includes SpectraCal, the world s leading provider of video display calibration software. The combined companies offer value-added, feature-rich solutions to both OEM display manufacturers and end users seeking improved accuracy and manageability of their displays. Portrait Displays, an Intel Capital Portfolio company, is a private corporation with headquarters in Pleasanton, California, USA with representatives in Europe, Taiwan, China, Japan, and Korea. Contact Us Submit a Technical Support Request: spectracal.com sales@spectracal.com Portrait Displays, Inc Owens Drive Pleasanton, CA USA portrait.com 6
Setup Guide. X-Rite i1display. Retail and OEM. Rev. 1.2
Setup Guide X-Rite i1display Retail and OEM Rev. 1.2 Introduction CalMAN supports the X-Rite i1 Display colorimeter (Retail and OEM) for measuring many display types, including CCFL, LED, plasma, and also
Setup Guide. SpectraCal C6 HDR2000 Colorimeter. Rev. 1.2
Setup Guide SpectraCal C6 HDR2000 Colorimeter Rev. 1.2 Introduction The SpectraCal C6 HDR2000 Colorimeter is one of the most advanced light measurement devices available, providing the accuracy you need
Setup Guide. Quantum Data 70x/80x Series. Video Generators. Rev. 1.1
Setup Guide Quantum Data 70x/80x Series Video Generators Rev. 1.1 Introduction CalMAN Required Version The Quantum Data 70x and 80x Video Generator test patterns can be automatically controlled by CalMAN
Setup Guide. Panasonic VX200/VX300/BT300. Plasma Displays. Rev. 1.1
Setup Guide Panasonic VX200/VX300/BT300 Plasma Displays Rev. 1.1 Panasonic VX200/VX300 (BT300 below) CalMAN Recommended Workflows CalMAN automatically calibrates the Panasonic VX200/VX300 display s two
Setup Guide. Murideo SIX-G. Digital Video Generator. Rev. 1.6
Setup Guide Murideo SIX-G Digital Video Generator Rev. 1.6 Introduction The Murideo SIX-G digital video generator can be automatically controlled by the CalMAN Display Calibration Software to produce measurement
2018 Quick Reference Guide
2018 Quick Reference Guide Introduction CalMAN can guide the calibration of a 2018 LG Super UHD LCD or an 2018 LG OLED TV in HDTV SDR, HDR10, and Dolby Vision modes. This assures the most accurate rendering
Setup Guide. Blackmagic Design HDLink Pro. Rev. 1.1
Setup Guide Blackmagic Design HDLink Pro Rev. 1.1 Introduction CalMAN Recommended Workflow CalMAN takes advantage of the Blackmagic Design HDLink Pro features to calibrate a video display with a 10-bit
Setup Guide. SpectraCal ColorBox. (also eecolor) Image Calibration Processor. Rev. 1.1
Setup Guide SpectraCal ColorBox (also eecolor) Image Calibration Processor Rev. 1.1 Introduction CalMAN takes advantage of the SpectraCal ColorBox (also eecolor) processor features to calibrate a video
Setup Guide. Color Volume Analysis Workflow. Rev. 1.2
Setup Guide Color Volume Analysis Workflow Rev. 1.2 Introduction Until the introduction of HDR, a video display s color reproduction range was typically represented with a two-dimensional chromaticity
Setup Guide. Panasonic BT-4LH310. Rev. 1.1
Setup Guide Panasonic BT-4LH310 Rev. 1.1 Introduction CalMAN Required Software Version CalMAN Display Calibration Software can automatically create an optimized 3D calibration LUT for the Panasonic 4LH310
Setup Guide. Pandora Pluto. Color Management System. Rev. 1.1
Setup Guide Pandora Pluto Color Management System Rev. 1.1 Introduction CalMAN Recommended Workflow CalMAN takes advantage of the Pandora Pluto features to calibrate a video display with a 10-bit 17x17x17
Setup Guide. Panasonic. VT30/DT30/D30, VT50/WT50 (US/NA models) Rev. 1.1
Setup Guide Panasonic VT30/DT30/D30, VT50/WT50 (US/NA models) Rev. 1.1 Introduction CalMAN automatically calibrates the Panasonic VT30/DT30/D30/VT50/WT50 US/NA model display s two point grayscale controls,
Setup Guide. Panasonic AS800/AX800/AX Models. Rev. 1.1
Setup Guide Panasonic AS800/AX800/AX900 2014 Models Rev. 1.1 Introduction CalMAN Recommended Workflows For the Panasonic models listed above, CalMAN automatically calibrates the display s two point grayscale
Setup Guide. AJA Video Systems LUT-box. Rev. 1.2
Setup Guide AJA Video Systems LUT-box Rev. 1.2 Introduction CalMAN Required Version: CalMAN takes advantage of the AJA Video Systems LUT-box features to calibrate a video display with a 10-bit 17x17x17
2018 Quick Reference Guide
2018 Quick Reference Guide Introduction This guide designed as a reference to the Sony BRAVIA Workflow, used to calibrate Sony's upper-end Android TVs including Z9D and subsequent LCD and OLED models.
Setup Guide. Dolby PRM Rev. 1.1
Setup Guide Dolby PRM-4200 Rev. 1.1 Introduction CalMAN Required Software Version CalMAN Display Calibration Software can automatically create an optimized 3D calibration LUT for the Dolby PRM-4200 monitor.
Setup Guide. Teradek COLR. Rev. 1.1
Setup Guide Teradek COLR Rev. 1.1 Introduction CalMAN Required Version CalMAN takes advantage of the Teradek COLR features to calibrate a video display with a 10-bit 33x33x33 3D cube lookup table (LUT).
Setup Guide. Konvision monitors. Rev. 1.0
Setup Guide Konvision monitors Rev. 1.0 Introduction CalMAN Display Calibration Software can automatically create multiple optimized calibration 3D LUTs for the entire line of Konvision monitors, with
Setup Guide. Flanders Scientific BoxIO. Rev. 1.1
Setup Guide Flanders Scientific BoxIO Rev. 1.1 Introduction CalMAN Required Version CalMAN takes advantage of the features of the Flanders Scientific BoxIO advanced color management device to calibrate
Setup Guide. Blackmagic Design Teranex Mini. Rev. 1.3
Setup Guide Blackmagic Design Teranex Mini Rev. 1.3 Introduction CalMAN takes advantage of the internal 3D LUT feature of the Blackmagic Design Teranex Mini to calibrate a video display with a 33x33x33
Setup Guide. Panasonic. VT60/ZT60/WT60/DT60, WT600 (US/Canada) VT60/ZT60/GT60/WT60/DT60/FT60, VT65, WT600 (EU) VT60/WT60/DT60 (NZ/Asia) Rev. 1.
Setup Guide Panasonic VT60/ZT60/WT60/DT60, WT600 (US/Canada) VT60/ZT60/GT60/WT60/DT60/FT60, VT65, WT600 (EU) VT60/WT60/DT60 (NZ/Asia) Rev. 1.1 Introduction CalMAN Recommended Workflows CalMAN automatically
Setup Guide. AV Foundry VideoForge HDMI. Digital Video Generator. Rev. 1.1
Setup Guide AV Foundry VideoForge HDMI Digital Video Generator Rev. 1.1 Introduction The AV Foundry VideoForge HDMI Digital Video Generator is a versatile, high value test pattern generator with a field-ruggedized
Setup Guide. SpectraCal MobileForge. Pattern Generator App. Rev. 1.6
Setup Guide SpectraCal MobileForge Pattern Generator App Rev. 1.6 Introduction MobileForge is a free pattern generator app for ios, Android, and Fire TV devices. MobileForge generates accurate test patterns
Setup Guide. Panasonic. VT30/GT30/DT30, VT50/GT50/WT50/DT50 (EU/UK models) Rev. 1.1
Setup Guide Panasonic VT30/GT30/DT30, VT50/GT50/WT50/DT50 (EU/UK models) Rev. 1.1 Introduction CalMAN Recommended Workflows CalMAN automatically calibrates the Panasonic VT30/GT30/DT30/VT50/GT50/WT50/DT50
Setup Guide. CalMAN Client for SCRATCH. Rev. 1.1
Setup Guide CalMAN Client for SCRATCH Rev. 1.1 Introduction CalMAN Required Software Version: CalMAN Display Calibration Software interfaces directly with ASSIMILATE SCRATCH software through the CalMAN
Setup Guide. CalMAN ColorMatch. Rev. 1.1
Setup Guide CalMAN ColorMatch Rev. 1.1 Introduction Thank you for your interest in using the free version of CalMAN ColorMatch. If you haven t already received your free ColorMatch license, follow this
Setup Guide. Creating 3D LUTs. CalMAN Overview. Rev. 1.1
Setup Guide Creating 3D LUTs CalMAN Overview Rev. 1.1 Introduction This is an overview guide for using the Intelligent Resolution Profiling (IRP), Lightning LUT, and 3D LUT Retargeting technologies that
Setup Guide. EIZO Monitors. Rev. 1.4
Setup Guide EIZO Monitors Rev. 1.4 Introduction CalMAN Display Calibration Software can automatically create optimized calibration 1D or 3D LUTs for EIZO monitors equipped with a self-calibration sensor.
Setup Guide. Rev. 1.7
Setup Guide By Rev. 1.7 Intrductin The SpectraCal VideFrge PRO test pattern generatr can be autmatically cntrlled by the CalMAN Display Calibratin Sftware t prduce measurement and calibratin test patterns
User Manual. Rev. 1.3
User Manual Rev. 1.3 Table of Contents Introduction 3 Important Safety Information 4 Electrostatic Discharge (ESD) Protection 5 Key Features 6 What's in the Box 7 Control & Indicator Functions 8 HDMI System
Calibration Using i1 probe with CalMan and Resolve
20160526 Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com www.flandersscientific.com Please
User Calibration Software. CM-S20w. Instruction Manual. Make sure to read this before use.
User Calibration Software CM-S20w Instruction Manual Make sure to read this before use. Safety Precautions Before you using this software, we recommend that you thoroughly read this manual as well as the
Yellow Frog. Manual Version 1.1
Yellow Frog Manual Version 1.1 1 YellowFrog Contents PC Requirements...... 2 YellowFrog Power Meter Measurement.... 3 YellowFrog PC Software..... 3 Main Screen....... 4 Input Overload....... 5 Battery
Selected Problems of Display and Projection Color Measurement
Application Note 27 JETI Technische Instrumente GmbH Tatzendpromenade 2 D - 07745 Jena Germany Tel. : +49 3641 225 680 Fax : +49 3641 225 681 e-mail : sales@jeti.com Internet : www.jeti.com Selected Problems
Procedures to Characterize Maury s Automatic Tuner Using ATS Software Version 5.1 or above
Procedures to Characterize Maury s Automatic Tuner Using ATS Software Version 5.1 or above Things to check before tuner characterization Make sure tuner is power up and USB cable is connected to the computer
Remote Director and NEC LCD3090WQXi on GRACoL Coated #1
Off-Press Proof Application Data Sheet Remote Director and NEC LCD3090WQXi on GRACoL Coated #1 The IDEAlliance Print Properties Working Group has established a certification process for off-press proofs
PLASMA MONITOR (PT20 UVVis) USER GUIDE
Thin Film Measurement solution Software, sensors, custom development and integration PLASMA MONITOR (PT20 UVVis) USER GUIDE August 2012 Plasma monitor with VFT probe. INTRODUCTION Plasma Monitor includes
Data Acquisition Instructions
Page 1 of 13 Form 0162A 7/21/2006 Superchips Inc. Superchips flashpaq Data Acquisition Instructions Visit Flashpaq.com for downloadable updates & upgrades to your existing tuner (See the next page for
MICROPLATE LUMINOMETER. Operating Manual. Dated: 3/7/2002 Version: C Part Number:
MICROPLATE LUMINOMETER Operating Manual Dated: 3/7/2002 Version: C Part Number: 998-9600 www.luminometer.com The Reporter TM Microplate Luminometer Operating Manual Table of Contents I. INTRODUCTION 2
User Manual. Product Link:
User Manual Product Name: "AVR JTAG ICE Emulator" Product Model: PRG-00025 Product Link: https://techshopbd.com/product-categories/avr-98764/3189/avr-jtag-ice-emulatortechshop-bangladesh Note: This AVR
FSI Calibration Guide Using I1 / LightSpace / Resolve
FSI Calibration Guide Using I1 / LightSpace / Resolve Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com
TALOS ITR-T250. TALOS ITR-T250 Driver Setup Guide (V1.0) on the disk sent with the printer. Follow the steps (see the picture):
TALOS ITR-T250 Driver Setup Guide (V1.0) Run the on the disk sent with the printer. Follow the steps (see the picture): Then click Next (see the following picture). 1 Choose I accept the agreement, (see
Installer Guide. Follow these instructions to set up the PowerLite Pro Cinema 1080 projector and HQV video processor.
Installer Guide Follow these instructions to set up the PowerLite Pro Cinema 1080 projector and HQV video processor. For more information, see the manuals that came with these products. Setting Up the
AEROTRAK PORTABLE AIRBORNE PARTICLE COUNTER MODEL 9110 QUICK START GUIDE
AEROTRAK PORTABLE AIRBORNE PARTICLE COUNTER MODEL 9110 QUICK START GUIDE Thank you for purchasing a TSI AeroTrak Model 9110 Portable Airborne Particle Counter (particle counter). This guide will help you
Using LightSpace CMS for User Created Calibration LUTs
20140130 Flanders Scientific, Inc. 6215 Shiloh Crossing Suite G Alpharetta, GA 30005 Phone: +1.678.835.4934 Fax: +1.678.804.1882 E-Mail: Support@FlandersScientific.com www.flandersscientific.com 1. If
ICAC User Manual. ICAC - ( Intelligent Connection for Alignment & Calibration ) Setup Calibration Measurement USO RESTRITO. Version 14.2.
ICAC User Manual ICAC - ( Intelligent Connection for Alignment & Calibration ) Setup Calibration Measurement Version 14.2.1 INDEX 1- Introduction ----------------------------------- 3 2- Structure -------------------------------------
Mini Micro Pulse Lidar System
Mini Micro Pulse Lidar System MiniMPL-532-C Sensor Suite Operations Manual Version: June 2016 THIS PAGE INTENTIONALLY LEFT BLANK 2 Table of Contents MINIMPL SENSOR SUITE SYSTEM: RECORD OF PURCHASE... 4
Media Tube HO ActionPad Configuration Manual V0.2 User Version
Media Tube HO Media Tube HO ActionPad Configuration Manual V0.2 User Version Cover: Media Tube HO RGBW/RGB/White Direct View Media Tube HO RGBW/RGB/White Diffused CONTENT 1. INTRODUCTIOn 3 2. Connection
In-situ Port Cal for Dual Carriages Tuner
In-situ Port Cal for Dual Carriages Tuner In-Situ port cal method is the calibration technique mainly for cascaded tuners or multi-carriage tuner. Unlike in-situ system cal which requires 2 VNA calibrations
Connect to a Presentation System
6 CHAPTER Revised November 24, 2010 A DMP transmits signals to a public presentation system that you choose, such as a flat-panel display or projector that is connected to the DMP. This system might use
So, how do I create LUTs for each one of the buttons on the remote?
Advanced Use of Prisma There are several papers and articles on LUTs and calibration that you can find on the Murideo web site. We'll start the discussion here by saying if you choose to optimize and maximize
Pulse Biomedical QRS-Card Tango M2 Interface Notes
Pulse Biomedical QRS-Card Tango M2 Interface Notes To setup Tango M2 with your stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232 Cable used to communicate
Calibrating and Profiling Your Monitor
Calibrating and Profiling Your Monitor For this module, you will need: Eye-One measurement device Counterweight (used for LCD screens only) New, modern displays are better First, you need to use a good
MaxView Cinema Kit Quick Install Guide
SYSTEM SETUP The MaxView will work at any of the following display settings: INSTALLATION MaxView Cinema Kit Quick Install Guide Step 1 - Turn off your computer. Disconnect your monitor s VGA cable from
Mortara X-Scribe Tango+ Interface Notes
Mortara X-Scribe Tango+ Interface Notes To setup Tango+ with the X-Scribe stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232 Cable used to communicate
LaCie 321 LCD Monitor
SWOP Application Data Sheet Remote Director Monitor Proofing System using the LaCie 321 LCD Monitor The SWOP Review Committee has approved the use of off-press proofs as input material to publications.
P XGA TFT Monitor. User s Manual
P6151 15 XGA TFT Monitor User s Manual Disclaimers This manual has been carefully checked and believed to contain accurate information. Axiomtek Co., Ltd. assumes no responsibility for any infringements
User Manual January,
User Manual January, 2018 1 2 Table of Contents CHAPTER 1: THE BASICS... 6 What to Expect from Calibration... 6 What Do I Need?... 6 Calibration Procedures... 7 Essential Equipment... 7 Basic Principles...
LG Electronics Monitor Proofing System with LG W2420R Display and Adobe Acrobat 8 Professional for GRACoL Coated #1
Off-Press Proof Application Data Sheet LG Electronics Monitor Proofing System with LG W2420R Display and Adobe Acrobat 8 Professional for GRACoL Coated #1 The IDEAlliance Print Properties Working Group
Operating Instructions
Operating Instructions HAEFELY TEST AG KIT Measurement Software Version 1.0 KIT / En Date Version Responsable Changes / Reasons February 2015 1.0 Initial version WARNING Introduction i Before operating
Table of Contents CHAPTER 1: INTRODUCTION: THE BASICS...6
User Manual August, 2018 1 2 Table of Contents CHAPTER 1: INTRODUCTION: THE BASICS...6 WHAT TO EXPECT FROM CALIBRATION... 7 WHAT DO I NEED?... 8 CALIBRATION PROCEDURES... 9 Essential Equipment... 9 Basic
ivw-ud322 / ivw-ud322f
ivw-ud322 / ivw-ud322f Video Wall Controller Supports 2 x 2, 2 x 1, 3 x 1, 1 x 3, 4 x 1 & 1 x 4 Video Wall Array User Manual Rev. 1.01 i Notice Thank you for choosing inds products! This user manual provides
OptoFidelity Video Multimeter User Manual Version 2017Q1.0
OptoFidelity Video Multimeter User Manual Version 2017Q1.0 OptoFidelity Oy sales@optofidelity.com www.optofidelity.com OptoFidelity 2017 Microsoft and Excel are either registered trademarks or trademarks
Aurora Grid-Tie Installation Instructions (Model Number: PVI-3.0-OUTD-US-W) Revision 4.1
Aurora Grid-Tie Installation Instructions (Model Number: PVI-3.0-OUTD-US-W) Revision 4.1 Contents 1) Grid-Tie Installation Block Diagram... 3 2) Installation Steps.... 4 2.1) Initial Setup.... 4 2.1.1)
Welch Allyn CardioPerfect Workstation Tango+ Interface Notes
Welch Allyn CardioPerfect Workstation Tango+ Interface Notes To setup Tango+ with the CardioPerfect stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232
PRELIMINARY. QuickLogic s Visual Enhancement Engine (VEE) and Display Power Optimizer (DPO) Android Hardware and Software Integration Guide
QuickLogic s Visual Enhancement Engine (VEE) and Display Power Optimizer (DPO) Android Hardware and Software Integration Guide QuickLogic White Paper Introduction A display looks best when viewed in a
Mortara XScribe Versions 3.xx and 5.xx Tango M2 Interface Notes
Mortara XScribe Versions 3.xx and 5.xx Tango M2 Interface Notes To setup Tango M2 with the XScribe cardiac stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables
User Manual MODEL: KK1500-TR. Touch Display LCD Monitor. Installation Guide. 15 Resistive Touch LCD Monitor
Touch Display LCD Monitor User Manual Installation Guide 15 Resistive Touch LCD Monitor MODEL: KK1500-TR i-tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@itechlcd.com WEB: www.itechlcd.com User
Real-Time PCR System TC
Detecting amplifier Real-Time PCR System TC 9443-007 - 46482062-2004 TECHNICAL PASSPORT ЛТОК 170604.00 DNA-Technology research-and-production close corporation Moscow, 2004 Contents 1. General information...
MediCal Pro. Installation & User Manual
MediCal Pro Installation & User Manual B4100132-02 July 2004 www.barco.com Contents Contents 3 Introduction 10 About this manual 10 About MediCal Pro 10 About QA tasks 11 The main window at start-up 12
CI-218 / CI-303 / CI430
CI-218 / CI-303 / CI430 Network Camera User Manual English AREC Inc. All Rights Reserved 2017. l www.arec.com All information contained in this document is Proprietary Table of Contents 1. Overview 1.1
VeriLUM 5.2. Video Display Calibration And Conformance Tracking. IMAGE Smiths, Inc. P.O. Box 30928, Bethesda, MD USA
VeriLUM 5.2 Video Display Calibration And Conformance Tracking IMAGE Smiths, Inc. P.O. Box 30928, Bethesda, MD 20824 USA Voice: 240-395-1600 Fax: 240-395-1601 Web: www.image-smiths.com Technical Support
Portable VGA & USB Audio to HDMI Converter Installation Guide
Introduction Portable VGA & USB Audio to HDMI Converter Installation Guide The Portable VGA & USB Audio to HDMI Converter connects your VGA-equipped computer to an HDMI display, projector or home theater
specification hyperion colorimeter
specification hyperion colorimeter Contents Hyperion... 3 2 Highlights... 3 3 General specifications... 4 4 Typical spectral sensitivity... 4 0mm measurement specifications... 6 Actual measurement data...
specification hyperion colorimeter
specification hyperion colorimeter Contents Hyperion... 3 2 Highlights... 3 3 General specifications... 4 4 Typical spectral sensitivity... 4 0mm measurement specifications... 6 0mm improved measurement
HIGHLY ANTICIPATED MULTISYNC PA301W FROM NEC DISPLAY SOLUTIONS MAKES ITS DEBUT
FOR IMMEDIATE RELEASE Media Contact: Philip Anast Tech Image (for NEC Display Solutions) (847) 279-0022, x238 philip.anast@techimage.com HIGHLY ANTICIPATED MULTISYNC PA301W FROM NEC DISPLAY SOLUTIONS MAKES
Palette Master Color Management Software
Palette Master Color Management Software How to Use Guide 01 Proprietary Calibration Software Co-developed with leading color calibration experts X-Rite, Palette Master software simplifies calibration
Philips StressVue Tango M2 Interface Notes
Philips StressVue Tango M2 Interface Notes To setup Tango M2 with the StressVue stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232 Cable used to communicate
Camera Setup Instructions
Camera Setup Instructions Hopefully this document will help new MallinCam owners set up their systems and get them to successful first light more quickly. Through the use of images, I hope to describe
3G-SDI to HDMI Scaler Installation Guide
Introduction 3G-SDI to HDMI Scaler Installation Guide The 3G-SDI to HDMI Scaler allows you to broadcast 3G-SDI signals from one source to two 3G-SDI and one HDMI outputs. Key Features and Benefits Converts
Film-Tech. The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment.
Film-Tech The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. These manuals are designed to facilitate the exchange of information related to cinema
Remote Director. Apple 23 LCD Display. Collaborative Soft Proofing using the I. MANUFACTURER INTRODUCTION. SWOP Application Data Sheet
SWOP Application Data Sheet Remote Director Collaborative Soft Proofing using the Apple 23 LCD Display The SWOP Review Committee has approved the use of off-press proofs as input material to publications.
More Skills 14 Watch TV in Windows Media Center
M05_TOWN5764_01_SE_SM5.QXD 11/24/10 1:08 PM Page 1 Chapter 5 Windows 7 More Skills 14 Watch TV in Windows Media Center You can watch and record broadcast TV in Windows Media Center. To watch and record
Transmitter Interface Program
Transmitter Interface Program Operational Manual Version 3.0.4 1 Overview The transmitter interface software allows you to adjust configuration settings of your Max solid state transmitters. The following
Connecting To and Programming the LPC2148 Blue Board. Method 1 ISP (In-System Programming) w/ Flash Magic
Connecting To and Programming the LPC2148 Blue Board We have two primary methods of programming the LPC2148 Blue Board. We can use the supplied bootloader with ISP (In-System Programming) or JTAG (better
Scan Converter Installation Guide
Scan Converter Installation Guide Software on supplied disks Please note: The software included with your scan converter is OPTIONAL. It is not needed to make the scan converter work properly. This software
Quick Setup Guide. DCX-500i / DCX-1000i / DCX-1500i Projectors with WC-Pro Scaler. Preliminary
Quick Setup Guide DCX-500i / DCX-1000i / DCX-1500i Projectors with WC-Pro Scaler Preliminary Table of Contents Introduction... 1 Connecting the Projector... 1 Installing the Primary Lens... 2 Connecting
ENERGY STAR Program Requirements Product Specification for Displays. Final Test Method Rev. Sep-2015
ENERGY STAR Program Requirements Product Specification for Displays Final Test Method Rev. Sep-2015 1 OVERVIEW The following test method shall be used for determining product compliance with requirements
DVB-T USB SET-TOP BOX
DVB-T USB SET-TOP BOX User Manual Version: 1.0 (February 2005) TRANSYSTEM INC. No.1-2 Li-Hsin Rd.I Science-Based Industrial Park, Hsinchu, Taiwan Tel:+886-3-5780393 Fax:+886-3-5784111 e-mail: sales@transystem.com.tw
Company Software Manual version Issued Date Sony Corporation Projector Calibration Pro Version 0.04 Mar 3rd, 2017
1 A. Equipment Required B. Corresponding projectors / Functions C. Preparation D. Functions E. Note 1. Equipment Required - Software: Projector Calibration Pro - Sony Projector with LAN port
AV Foundry VideoForge HDMI Digital Video Generator Quick Start Guide
AV Foundry VideoForge HDMI Digital Video Generator Quick Start Guide Thank you for purchasing an AV Foundry VideoForge HDMI Digital Video Generator, a versatile, high value test pattern generator with
ENERGY STAR Program Requirements Product Specification for Televisions. Draft Test Method
ENERGY STAR Program Requirements Product Specification for Televisions Draft Test Method Note: EPA is committed to supporting and adopting the television test procedure currently under development by the
HDMI to DVI + Audio Quick Installation Guide
HDMI to DVI + Audio Quick Installation Guide Introduction The HDMI to DVI + Audio provides an easy solution for converting digital HDMI to digital video (DVI-D) and both digital audio (S/PDIF) and analog
1x2 HDMI Splitter with 3D and 4Kx2K Quick Installation Guide
1x2 HDMI Splitter with 3D and 4Kx2K Quick Installation Guide Introduction The 1x2 HDMI Splitter with 3D and 4Kx2K broadcasts HDMI signals from one source to two HDMI displays. Key Features and Benefits
J.M. Stewart Corporation 2201 Cantu Ct., Suite 218 Sarasota, FL Stewartsigns.com
DataMax INDOOR LED MESSAGE CENTER OWNER S MANUAL QUICK START J.M. Stewart Corporation 2201 Cantu Ct., Suite 218 Sarasota, FL 34232 800-237-3928 Stewartsigns.com J.M. Stewart Corporation Indoor LED Message
The Emergence of LCD TV and its Impact on Glass. James B. Flaws Vice Chairman and Chief Financial Officer
The Emergence of LCD TV and its Impact on Glass James B. Flaws Vice Chairman and Chief Financial Officer January 10, 2006 Forward Looking and Cautionary Certain statements in this presentation constitute
Illuminating the home theater experience.
Illuminating the home theater experience. Epson PowerLite Pro Cinema 800. It doesn t get any better than this. The PowerLite Pro Cinema 800 is Epson s flagship home theater projector. It features top-of-the-line
0.56" 4 Digital Blue LED Panel Meter (rescalable) User s Guide
0.56" 4 Digital Blue LED Panel Meter (rescalable) User s Guide 2004-2009 Sure Electronics Inc. ME-SP037B_Ver1.0 0.56" 4 DIGITAL BLUE LED PANEL METER (RESCALABLE) USER S GUIDE Table of Contents Chapter
HDMI to 3G-SDI Scaler Installation Guide
Introduction HDMI to 3G-SDI Scaler Installation Guide The HDMI to 3G-SDI Scaler allows you to broadcast HDMI signals from one source to two 3G-SDI outputs. Key Features and Benefits Convert HDMI signals
SW Series LCD Monitor User Manual
SW Series LCD Monitor User Manual Copyright Copyright 2017 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system