Keyed LC Connector Solution A LANscape Solutions Product

Transcription

1 Applications Department of Defense installations Secure government facilities Research labs Organizations with a desire to segregate networks due to privacy or security concerns Keyed LC Connector Solution provides mechanical network security in optical fiber cabling, utilizing the LC small-form-factor (SFF) format. Based on the standard LC single-fiber connector, the keyed LC solution provides physical separation for up to four networks, applications or organizations. Four color-coded key combinations prevent inadvertent or unauthorized access to networks and provide fast and easy network identification. On the front and back of the patch panel, keyed connectors and adapters are used to match access rights to the proper network. The key features in the connector and adapter cannot be duplicated with standard LC components, preventing violation of network security. The small-form-factor LC connector allows high-density deployments in less space than SC or ST Compatible Connectors and supports up to 88 fibers in a 4U rack-mountable housing. A full solution is available, from factory-installed keyed LC connectors for assemblies and Plug & Play Universal modules, to field-installable UniCam Connectors and anaerobic keyed LC connectors, to adapters loaded into standard LANscape Solutions panels and modules. Four color-coded mechanical key positions to prevent mismatch of networks Meets TIA/EIA-568-B optical performance requirements Keyed LC Connector Drawing ZA-304 Keyed LC Adapter Drawing ZA-305 Adapters permit front and rear security in network panel Available in single-mode, 6.5 µm multimode, standard 50 µm and laser-optimized 50 µm multimode 1 Product Specifications

2 UniCam Connector No epoxy, no polish No need for electrical power for ovens or lights Quick installation: less than one minute per connector 100 percent factory tested for insertion loss (average 0.3 db insertion loss) Fast termination, high installation yields and no consumables means lowest costs Factory-polished end-face for consistent optical performance, and factory-built jumper quality Continuity Test Set gives immediate go/no-go feedback of successful termination Utilizes standard UniCam Connector Tool Kit for installation so no additional materials required Reliable, proven technology with more than 40 million units sold since 1993 Anaerobic Connector Fast cure anaerobic adhesive; does not require electrical power for lamps or ovens Hand polish; does not require polishing machine Reduced installation time; single-strike crimp solution ensures less than three minutes assembled and polished Average 0. db insertion loss with physical contact polish CCH Adapter Panels Universal approach is used; one panel size fits in all standard LANscape Solutions hardware (for example, CCH, PCH, CCS, WCH, ICH, EDC, FZB) Adapters are keyed on both sides to provide total network security CCH Pigtail Modules Compatible with PCH and CCH LANscape Solutions rack-mountable housings Offers greater protection to optical cables and connectors Provided with factory-installed and -tested 3 m pigtails Available with MIC Cable or ribbon pigtail types Plug & Play Universal Systems Modules Factory-terminated solutions for improved system performance, component compatibility and consistent quality Universal wired modular system components enable fast and simple networking moves, adds and changes without polarity concerns associated with special polarity-compensating components For networks with an installed base of Plug & Play Classic Systems, keyed LC modules are also available (please review ordering information) Cable Assemblies Complete line of single-fiber jumpers to high-fiber-count assemblies available with keyed LC to all connector types State-of-the-art manufacturing process ensures consistent performance and tightly controlled end-face geometry 100 percent factory tested

3 Ordering Information UniCam Connectors K 1 1 Select fiber type. 000 = 6.5 µm 050 = 50 µm 05X = Laser-optimized 50 µm 00 = Single-mode Select keyed LC style. N = Blue R = Red Y = Yellow G = Green 95-05X-KN Keyed LC UniCam Connector, laser-optimized 50 µm, blue Anaerobic-Cure Keyed LC Field-Installable Connectors SP-K 1 1 Select fiber type. 101 = 6.5 µm 051 = 50 µm 01 = Single-mode Select keyed LC style. N = Blue R = Red Y = Yellow G = Green SP-KN Keyed LC 6.5 µm Multimode Connector, blue 3

4 Ordering Information (continued) Single-Fiber Keyed LC Connector Assemblies patch cords and high-fiber-count assemblies are ordered using seven easy steps. The steps involve the selection of connector(s), cable and length. The format and steps are listed below. 1st Connector nd Fiber Connector Count Cable Length Unit of Measure For single-fiber connectors, use the following options to construct the part number: 1 Select connector code based on the type of adapter used at the patch panel and the electronic interface connector. The connector and adapter must be compatible for a correct connection. (Always use the lowest code first when constructing the part number.) 00= No connectors (use when ordering a pigtail) Multimode 39 = SC PC simplex, ceramic 57 = SC PC duplex, ceramic 50 = ST Compatible PC, ceramic 03 = LC PC simplex* 05 = LC PC duplex* 4 = Keyed LC PC simplex* 6 = Keyed LC PC duplex* * Available on 1.6 mm,.0 mm and 900 µm cable types only. Single-mode 58 = SC ultra PC simplex 7 = SC ultra PC duplex 61 = ST Compatible ultra PC 0 = LC ultra PC simplex* 04 = LC ultra PC duplex* 30 = Keyed LC ultra PC simplex* 33 = Keyed LC ultra PC duplex* Select fiber count For fiber counts greater than 96, contact Customer Service. 3 Select fiber type. R = Single-mode C = 50 µm S = Laser-optimized 50 µm K = 6.5 µm 4 Select cable type. 31Z = Single-fiber.0 mm riser 51Z = Zipcord.0 mm riser 81Z = MIC Riser Distribution Cable (.0 mm legs) 5 Select keyed LC connector style. N = Blue R = Red Y = Yellow G = Green 6 Select assembly length For lengths greater than 999, contact Customer Service. 7 Select unit of measure. M = Meters F = Feet For additional cable options, contact Customer Service. 4

5 Ordering Information (continued) Connector Panels CCH - CP - K 1 1 Select fiber count. 1 = 1 fibers (six duplex adapters) 4 = 4 fibers (1 duplex adapters) Select keyed LC duplex adapter style and fiber type. 1 = Blue, single-mode = Blue, laser-optimized 50 µm 3 = Blue, 50 µm 4 = Blue, 6.5 µm 5 = Red, single-mode 6 = Red, laser-optimized 50 µm 7 = Red, 50 µm 8 = Red, 6.5 µm 9 = Yellow, single-mode A = Yellow, laser-optimized 50 µm B = Yellow, 50 µm C = Yellow, 6.5 µm D = Green, single-mode E = Green, laser-optimized 50 µm F = Green, 50 µm G = Green, 6.5 µm CCH-CP1-KA CCH Connector Panel with six keyed LC duplex adapters, yellow, laser-optimized 50 µm 5

6 Ordering Information (continued) Pigtailed Module A standard pigtail length is 3 m (9.84 ft). For lengths other than 3 m, please contact Customer Service at CCH - RM - K - P Select fiber count. 1 = 1 fibers 4 = 4 fibers Select keyed LC adapter and fiber type. 1 = Blue, single-mode = Blue, laser-optimized 50 µm 3 = Blue, 50 µm 4 = Blue, 6.5 µm 5 = Red, single-mode 6 = Red, laser-optimized 50 µm 7 = Red, 50 µm 8 = Red, 6.5 µm 9 = Yellow, single-mode A = Yellow, laser-optimized 50 µm B = Yellow, 50 µm C = Yellow, 6.5 µm D = Green, single-mode E = Green, laser-optimized 50 µm F = Green, 50 µm G = Green, 6.5 µm 3 Select cable type. MIC Cable Subunit (Standard fiber cable option) CH = Multimode (50 µm) KH = Multimode (6.5 µm) RH = Single-mode SH = Multimode (laser-optimized 50 µm) Ribbon fiber CJ = Multimode (50 µm) KJ = Multimode (6.5 µm) RJ = Single-mode SJ = Multimode (laser-optimized 50 µm) CCH-RM1-K4-P03KH CCH 1-Fiber Pigtail Module with six keyed LC duplex multimode blue adapters and a 3 m long MIC Cable subunit 6.5 µm pigtail 6

7 Ordering Information (continued) Plug & Play Universal Systems Keyed LC Modules CCH - M Select module type. U = Universal* R = Classic *Default is Universal. Please note that Classic and Universal components are not compatible. Select fiber count. 1 = 1 fibers 4 = 4 fibers 3 Select connector code. 6 = Keyed LC multimode, duplex 33 = Keyed LC single-mode, duplex 4 Select MTP Connector. 70 = Multimode 89 = Single-mode Select fiber type. K = Multimode (6.5 µm) C = Multimode (50 µm) S = Multimode (laser-optimized 50 µm) R = Single-mode, laser-optimized 5 6 Select keyed LC style. BL = Blue RD = Red YL = Yellow GR = Green s CCH-UM4-6-70C-YL 4-Fiber, Standard 50 µm Multimode Module with 1 yellow keyed LC duplex adapters 7

8 Accessories TKT-UNICAM-CTS Installation Kit for single-fiber and -fiber UniCam Connectors, includes FBC-001 Score and Snap Cleaver plus splitter box, tool adapters and patch cords needed to add Continuity Test Set (CTS) functionality TKT-ANAEROBIC Installation Kit for anaerobic-cure connectors, includes consumables for 500 connectors (keyed LC puck must be ordered separately) Hand puck, LC, keyed Crimp Tool for LC heat-cure and anaerobic connectors TRIGGER-BP-D Duplex Trigger with anti-snag feature for LC connectors (100/pack) Test Jumper Kits Test jumper kit with two SC to keyed LC test jumpers, one LC keyed to LC keyed test jumper, and two LC keyed adapters. Select color code and fiber type. TJK - SC - KLC - - Select keyed LC style. N = Blue R = Red Y = Yellow G = Green 1 1 Select jumper type. E = Single-mode K = 6.5 µm C = 50 µm standard S = 50 µm laser-optimized TJK-SC-KLC-G-K Keyed LC, green, 6.5 µm multimode test jumper kit LLC PO Box 489 Hickory, NC USA FAX: International: reserves the right to improve, enhance and modify the features and specifications of products without prior notification. LANscape, MIC and UniCam are registered trademarks of Brands, Inc. Plug & Play is a trademark of Brands, Inc. Discovering Beyond Imagination is a trademark of Incorporated. ST is a registered trademark of Lucent Technologies. MTP is a registered trademark of USConec Ltd. All other trademarks are the properties of their respective owners. Cable Systems is ISO 9001 certified All rights reserved. Published in the USA. LAN-701-EN / November 006 8