Lockit Timecode Beetle ACN-BT

Size: px

Start display at page:

Download "Lockit Timecode Beetle ACN-BT"

Melvyn McKinney
6 years ago
Views:

1 Lockit Timecode Beetle experience quality.

2 Table of contents page 1. Introduction 2 2. Package Contents 2 3. Warranty & Approvals 3 Warranty 3 Approvals 4 1

1. Introduction The Beetle, Serial Bluetooth 4.0 LE Link, connects TonMeister App with selected devices. (Check website for list of supported devices) ipad Gen. 3 or later required.

3 1. Introduction The Beetle, Serial Bluetooth 4.0 LE Link, connects TonMeister App with selected devices. (Check website for list of supported devices) ipad Gen. 3 or later required. Initial support is strictly limited to the Sound Devices 788T in combination with the TonMeister app on selected ios devices. The Beetle will ONLY be detected with compatible app active. Enable Bluetooth within the system settings on your ipad Gen. 3 or later and launch app. The Beetle should connect automatically and now also show up in your system settings. Only use with original cables manufactured by Ambient available through authorised supply chains and exclusively with the intended devices. Connecting to other hardware or using different cables may damage this and attached units and consecutively risk of electric hazard. Only use indoors in dry environments, keep away from heat and moisture. Do not establish connection with indications of mechanical damage of involved devices or connections. Supported devices: Sound Devices 788T connect to C-LINK IN port of your recorder 2. Package Contents Beetle, Connector cable to SD 788T Recorder, BTC-CL Antenna, ANT-2.4-SMA-M90 Product Sheet ,

4 Warranty 3. Warranty & Approvals warrants the Bluetooth adapter against defects in materials and workmanship for a period of ONE (1) year from date of original retail purchase. This is a nontransferable warranty that extends only to the original purchaser. will repair or replace the product at its discretion at no charge. Warranty claims due to severe service conditions will be addressed on an individual basis. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE. AMBIENT RECORDING GMBH DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. AMBIENT RECORDING GMBH IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY. Because some jurisdictions do not permit the exclusion or limitations set forth above, they may not apply in all cases. For all service, including warranty repair, please send the Bluetooth adapter, along with proof of purchase date to your retailer, or, if not applicable, to: Schleissheimer Str. 181 C DE Muenchen, Germany Please obtain a return authorization through the contact form on our website before sending in a unit. 3

5 Approvals CE Conformity Statement: Declaration of Conformity According to ISO/IEC Guide 22 Manufacturer s Name: Manufacturer s Address: Schleissheimer Str. 181 C, DE Muenchen, Germany declares that the product: Bluetooth adapter is in conformity with: - EN : A11:2009+A1:2010+A12:2011+AC: EN v EN V EN V EN 62311:2008 FCC Statement The FCC requires that the following statements be included in this manual for : FCC This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canada CNR-Gen Section This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement ,

6 FCC Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ICES-003 Consult the dealer or an experienced radio/tv technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. October 2014 Sebastian Fell 5

7 MADE IN GERMANY Schleissheimer Straße 181 C D Munich vox fax info@ambient.de 2016,

GymConnect Retrofit Module

GymConnect Retrofit Module Installation and Programming guide Version 1.0 June 8, 2017 Wahoo Fitness LLC 2017 Table of Contents Component identification Introduction Components Installation Programming