Cylindrical Photoelectric Sensor CY-100 SERIES

Transcription

1 Cylindrical Photoelectric Sensor CY-00 SERIES Listing (2 m cable length type only) Features Wide product range Shape: Standard type Side view type Connector: 2 m cable length type M2 plug-in connector type Diffuse reflective type sensor with sensitivity adjuster is available. M8 thread size for convenient mounting Strong resistance IP67 Convenient universal sensor mounting stand is available. ORDER GUIDE 2 m cable length type Standard Side view Type Appearance Sensing range Retroreflective Diffuse reflective Retroreflective Diffuse reflective (Note 2.3) polarizing filters sensitivity adjuster Thrubeam Thrubeam (Note 2.3) polarizing filters sensitivity adjuster 2 m 6.56 ft 00 mm 0.33 ft 600 mm.97 ft 2 m 6.56 ft 00 mm 3.9 in 600 mm in 5 m 9.2 ft m 3.2 ft 5 m 9.2 ft m 3.2 ft NPN output Model No. (Note ) PNP output Output operation CY-A CY-A-P Light-ON CY-B CY-B-P Dark-ON CY-92A-Y CY-92A-P-Y Light-ON CY-92B-Y CY-92B-P-Y Dark-ON CY-9A-Y CY-9A-P-Y Light-ON CY-9B-Y CY-9B-P-Y Dark-ON CY-2A CY-2A-P Light-ON CY-2B CY-2B-P Dark-ON CY-22A CY-22A-P Light-ON CY-22B CY-22B-P Dark-ON CY-VA CY-VA-P Light-ON CY-VB CY-VB-P Dark-ON CY-92VA-Y CY-92VA-P-Y Light-ON CY-92VB-Y CY-92VB-P-Y Dark-ON CY-9VA-Y CY-9VA-P-Y Light-ON CY-9VB-Y CY-9VB-P-Y Dark-ON CY-2VA CY-2VA-P Light-ON CY-2VB CY-2VB-P Dark-ON CY-22VA CY-22VA-P Light-ON CY-22VB CY-22VB-P Dark-ON Notes: ) The model No. with E shown on the label affixed to the thru-beam type sensor is the emitter, D shown on the label is the receiver. (e.g.) Emitter of CY-A: CY-E, Receiver of CY-A: CY-AD 2) The retlector is sold separately. 3) The sensing range of the retroreflective type sensor is specified for the RF-20 reflector (optional). M2 plug-in connector type M2 plug-in connector type is also available. When ordering this type, -Z for the M2 plug-in connector type to the model No. (e.g.) M2 plug-in connector type of CY-A-P is CY-A-P-Z. Standard type Side view type

2 Cylindrical Photoelectric Sensor CY-00 SERIES ORDER GUIDE Mating cable (2 cables are required for the thru-beam type.) For M2 plug-in connector type Type Model No. Description Straight Elbow CN-2C-C2 CN-2C-C5 CN-2CL-C2 CN-2CL-C5 Length: 2 m 6.56 ft Length: 5 m 6.0 ft Length: 2 m 6.56 ft Length: 5 m 6.0 ft Clamping ring : ømm 0.55 in Cable outer : ø5.3mm 0.2 in Mating cable Straight type Elbow type OPTIONS Designation Model No. Description Sensor mounting bracket Sensor mounting bracket MS-CY- MS-CY-2 Material: Stainless steel Material: Plastic, For beam axis alignment MS-CY- MS-CY-2 Universal sensor mounting stand MS-AJ3 It can adjust the height of the sensor and reflector RF-20. (The thru-beam type sensor needs two brackets.) RF-20 RF mm in 2 2 mm in Reflective tape RF-0RL5 22 mm 5 m in, Thickness: 0. mm 0.02 in Universal sensor mounting stand MS-AJ3 RF-20 RF-0 Reflective tape RF-0RL5 WIRING DIAGRAMS Wiring diagram Emitter of thru-beam type Receiver of thru-beam / Reflective type NPN output type Receiver of thru-beam / Reflective type PNP output type Connector pin position M2 connector 3 2 : +V 2 : Input (Only emitter of thru-beam type) 3 : 0 V : Output (Only receiver of thru-beam type and reflective type) 2

3 Cylindrical Photoelectric Sensor CY-00 SERIES SPECIFICATIONS Model No. Type Thru-beam Retroreflective Diffuse reflective polarizing filters sensitivity adjuster Standard Side view Standard Side view Standard Side view Standard Side view Standard Side view Light-ON CY-A CY-VA CY-92A CY-92VA CY-9A CY-9VA CY-2A CY-2VA CY-22A CY-22VA Item Dark-ON CY-B CY-VB CY-92B CY-92VB CY-9B CY-9VB CY-2B CY-2VB CY-22B CY-22VB Sensing range 5 m 9.2 ft m 3.2 ft (Note 2) 2 m 6.56 ft (Note 2) Sensing object ø8 mm ø0.7 in or more opaque object (Setting distance between emitter and receiver: 5 m 9.2ft) ø50 mm ø.97 in or more opaque, translucent or transparent object (Note 2, ) ø50 mm ø.97 in or more opaque, translucent, transparent or specular object (Note 2, ) 00 mm 3.9 in (Note 3) 600 mm in (Note 3) Opaque, translucent or transparent object (Note ) Hysteresis 3 to 5 % of operation distance (Note 3) Supply voltage Current consumption Emitter: 35 ma or less Receiver: 35 ma or less 2 to 2 V DC ±0 % Ripple P-P 0 % or less 35 ma or less Output Utilization category Short-circuit protection <NPN output type> <PNP output type> NPN open-collector transistor PNP open-collector transistor Maximum sink current: 00 ma Maximum source current: 00 ma Applied voltage: 2 V DC or less (between output and 0 V) Applied voltage: 2 V DC or less (between output and +V) Residual voltage:.5 V or less Residual voltage:.5 V or less DC-2 or DC-3 Incorporated Response time ms or less Test input (emission halt) function Incorporated Operation indicator Power indicator Pollution degree Green LED (lights up when the power is ON) (incorporated on the emitter) Yellow LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type) 3 (Industrial environment) Environmental resistance Protection IP67 (IEC) Ambient temperature 25 to +55 C 3 to +3 F (No dew condensation or icing allowed), Storage: 0 to +70 C 22 to +58 F Ambient humidity 50 % RH (at +70 C +58 F) Ambient illuminance Incandescent light: 5,000 lx at the light-receiving face EMC EN Voltage withstandability 500 V AC for one min. between all supply terminals connected together and enclosure Vibration resistance 0 to 55 Hz frequency, 0.5 mm 0.02 in amplitude in X, Y and Z directions for.5 hours each Shock resistance 29 m/s 2 acceleration (30 G ) in X, Y and Z directions for three times each Emitting element Infrared LED (modulated) Red LED (modulated) Infrared LED (modulated) Peak emission wavelength 890 nm 0.0 mil 875 nm 0.03 mil 665 nm 0.03 mil 875 nm 0.03 mil Material Cable (except for M2 plug-in connection type) Cable extension Net weight (Note 5) 2 m cable length type M2 plug-in connector type Enclosure: PBT, Lens: PMMA 0. mm 2 3-core cabtyre cable, 2 m 6.56 ft long Extension up to total 0 m 32.8 ft is possible with 0.3 mm 2, or more, cable (thru-beam type: both emitter and receiver). Receiver: 65 g Receiver: 5 g Receiver: 70 g Receiver: 20 g 65 g 5 g 70 g 20 g 65 g 5 g 70 g 20 g 65 g 5 g 70 g 20 g 75 g 25 g Accessories Nut: pcs. Nut: 2 pcs. Notes: ) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 C +73. F. 2) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-20 reflector (optional). 3) The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper ( mm in) as the object. ) Make sure to confirm detection with an actual sensor before use for detection of the transparent object and the translucent object. 5) The weight includes the weight of nuts. 3

4 Cylindrical Photoelectric Sensor CY-00 SERIES DETECTION CURVES Thru-beam type Diffuse reflective Diffuse reflective type with adjustable sensitivity Retroreflective type Retroreflective type with polarizing filters ø 0.9 in ø 2 mm ft A 5 m m 0.55, ,.97 5 A 3.9 in 0 cm in 0,59 5 cm in A 60 cm in cm ft A m m ø of beam E/R , A 6.56 ft 2 m A=Sensing range Object 0 0 cm; White 90%; 2 Grey 8% reflector RF-20 reflector RF-20 PRECAUTIONS FOR PROPER USE Mounting The tightening torque should be 3 N m or less. Use a cable with connector CN-2C(L)-C (optional) for M2 connector type. Tightening torque for connector part is 2 N m or less. Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Mounting drawing with sensor or reflector RF-20 Wiring Make sure that the power supply is off while wiring. Verify that the supply voltage variation is within the rating. If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground. Ensure that an isolation transformer is utilized for the DC power supply. If an autotransformer is utilized, the main body or power supply may be damaged. If the used power supply generates a surge, connect a surge absorber to the power supply to absorb the surge. Do not use during the initial transient time (0.5 sec) after the power supply is switched on. In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground. Do not run the wires together with high-voltage lines or power lines or put them in the same raceway. This can cause malfunction due to induction. Damage or burnout may result in case of short circuit of load or miswiring. Make a cable length as short as possible to lessen noise pickup. Others Our products have been developed / produced for industrial use only. Take care that the sensor is not directly exposed to fluorescent lamp from a rapid-starter lamp or a high frequency lighting device, as it may affect the sensing performance. Avoid using a product where there is excessive vapor, dust or corrosive gas, or in a place where it could be exposed directly to water or chemicals. Take care that the sensor does not come in direct contact with water, oil, grease or organic solvents, such as, thinner, etc. Do not use in an environment containing infammable or explosive gases. Never disassemble or modify the product.

5 Cylindrical Photoelectric Sensor CY-00 SERIES DIMENSIONS (Unit: mm in) CY- Sensor M8 2 m cable length type (mm in) M2 plug-in connector type (mm in) a b a b a b Standard type CY- /2 / Standard type CY Side view type CY-V /2V /9V /92V Standard type CY Side view type CY-22V CN-2C-C2 CN-2C-C5 Mating cable CN-2CL-C2 CN-2CL-C5 Mating cable ø ø0.55 Connector pin position BU BK 3 M Connector pin position BU BK 3 2 L 2 L = 2 or 5 m 6.56 or 6.0 ft WH BN L = 2 or 5 m 6.56 or 6.0 ft ø0 ø WH BN MS-CY- Sensing mounting bracket ø ø0.72 MS-CY-2 Sensing mounting bracket 0 5 ø ø = = = = = = MS-AJ3. Ball-joint mounted fixing bracket CY-00 series or RF M2 rod Universal sensor mounting stand 3. Support for M2 rod ø8.5 ø M M ø6.5 ø

6 DIMENSIONS (Unit: mm in) RF-20 RF ø5.5 ø R5 R ø.5 ø ø7.5 ø ø.5 ø = = 29. ø.5 ø0.8 6

7 Disclaimer The applications described in the catalog are all intended for examples only. The purchase of our products described in the catalog shall not be regarded as granting of a license to use our products in the described applications. We do NOT warrant that we have obtained some intellectual properties, such as patent rights, with respect to such applications, or that the described applications may not infringe any intellectual property rights, such as patent rights, of a third party. Please contact... Panasonic Electric Works SUNX Co., Ltd. 23- Ushiyama-cho, Kasugai-shi, Aichi, , Japan Telephone: Facsimile: Global Sales & Marketing Division Telephone: Facsimile: panasonic-electric-works.net/sunx All Rights Reserved Panasonic Electric Works SUNX Co., Ltd. 20 No. CE-CYGX-0 November, 20 Specifications are subject to change without notice. Printed in Japan