PROGRAMMING THE REMOTE CONTROL

Size: px

Start display at page:

Download "PROGRAMMING THE REMOTE CONTROL"

Peter Miles
6 years ago
Views:

I PROGRAMMING TH RMOT CONTROL This Remote Control is preprogrammed to operate TOSHIBA VCR s.

8 gip p, 6 Yg*~ y&-i& CH A RCALL TO CONTROL OTHR BRANDS OF VCR S AND CABL TV CONVRTRS 1 Refer to the VCR code table (or Cable TVconvetier code table ) on pages 16 and 17

If more than one number is listed, try each one separately untit you find the one that works. - Number 2 Set the TV/CABL/VCR/AUX switch to VCR (or CABL).

The transmit indicator tights up for l second when the programming is completed. When an operation error has occurred, the indicator blinks. Press RCALL again to reset.

- If the VCR does not respond to the Remote Control, repeat steps 1 to 4 with another code number.

1 I PROGRAMMING TH RMOT CONTROL This Remote Control is preprogrammed to operate TOSHIBA VCR s. To use VCR s other than Toshiba models (or Cable converter), perform the following procedures before operating. 8 gip p, 6 Yg*~ y&-i& CH A RCALL TO CONTROL OTHR BRANDS OF VCR S AND CABL TV CONVRTRS 1 Refer to the VCR code table (or Cable TVconvetier code table ) on pages 16 and 17 to find the code number that corresponds to the brand name of your VCR (or your converter). If more than one number is listed, try each one separately untit you find the one that works. - Number 2 Set the TV/CABL/VCR/AUX switch to VCR (or CABL). 3 Hold d own RCALL while pressing the Number buttons for the three digit code number for your brand of VCR (or converter). The transmit indicator tights up for l second when the programming is completed. When an operation error has occurred, the indicator blinks. Press RCALL again to reset. 4 Point the Remote Control at the VCR (or at the converter) and press POWR to test the code number. - If the right number was entered, the VCR should turn on. - If the VCR does not respond to the Remote Control, repeat steps 1 to 4 with another code number. Notes: You have to reprogram the Remote Control when you change its batteries. I, Some newer VCR s are capable of working on either of two remote codes. These VCR s have a switch labeled VCRWCR2. If your VCR has this kind of switch, and does not respond to all the code numbers for your VCR brand name, set the switch to another position ( VCRY or VCR2 ) and reprogram the Remote Control. 2 0 i= Q $ ki 3 8 a5 ii z F II 2 k rt N ii - : is : For future reference, write the code you used. VCR COD: -_L i ai P s 5 CABL COD: F 5.I s s 0 d ; 3

PROGRAMMING TH RMOT CONTROL (Continued) The code numbers listed below are the newest ones at the time of printing. New code numbers may or may not have been added since printing.

...056,100 Audiovox....056 Baird......I23 Bell & Howell.....I23 Broksonic......140,203,230 Bush....091,228,297 Canon....054 Capehart...,039 Carver....I00 CC......091,297 CG.....019 Cimline......091 Condor.

....,019 lectronic......019 merson......019,021,056,080, 140,203,227,228, 230,231,313 SC.....29 7 Ferguson......060 Fidelity....019 Finlandia....100,123,129 Finlux.....019.061,100,123, First line.

2 PROGRAMMING TH RMOT CONTROL (Continued) The code numbers listed below are the newest ones at the time of printing. New code numbers may or may not have been added since printing. VCR code tabie BRAND NAM COD NUMBR BRAND NAM COD NUMBR BRAND NAM COD NUMBR Aiko Aiwa...,019 Akai ,068,080,125, 261 Atba ,228,297 Amstrad...,019 Anitech ASA ,100 Audiovox Baird......I23 Bell & Howell.....I23 Broksonic ,203,230 Bush ,228,297 Canon Capehart...,039 Carver....I00 CC ,297 CG Cimline Condor Craig ,259 Crown Curtis Mathes Daewoo ,064,065,297 Dansai Daytron De Graaf Decca ,100 Dual Dumont ,100,123, Dynatech.....,019 lectronic merson ,021,056,080, 140,203,227,228, 230,231,313 SC Ferguson Fidelity Finlandia ,123,129 Finlux ,100,123, First line ,091 Fisher ,066,073,085, 123 Frontech Funai...,019 G ,079,084 GC....I00 General Go Video ,298 Goldstar Goodmans ,039,056,081, 09 1,297 Gradiente Graetz ,123 Granada ,100,123 Grundig......lOO Harman/Kardon Hem.....,091 Hinari ,227 Hitachi ,061,084, Imperial Interfunk.....,100 ITT ,065,123,125 JCL Jensen JVC ,060,086 Kendo Kenwood ,060,065,086 Lloyd... m.019 Loewe Loewe opta...lo 0 Logik ,259 Luxor ,065,125 LXI Magnavox ,054,100,129, 168 Manesth ,091 Marantz ,057,081,100 Marta Matsui ,228 MI Memorex ,054,056,058, 065,066,067,123 MGA...062,08 0 Minolta , Mitsubishi ,080,086,100, 192,233,261 MTC ,259 Multitech ,091 Murphy NC ,060,069, 086 Neckermann...,100 Nikko Noblex Nokia ,123,125, 259 Nordmende Optonica ,081 Orion ,227,228 Osaki....O I9,056,091 Otto Versand...,100 PaIlidium Panasonic ,096,244 Penney ,056,057,059, 061,259 Pentax ,084, Perdio Philco...,054 Philips ,081,100,129 Phonola.....,100 Pilot...,056 Pioneer ,100 Portland...,039 Proline Pulsar PYe Quartz Quasar ,115 Quelle......I00 Radiola....I00 RCA ,061,084,096,,168,221 RCA Unified Reaiistic...Ol9,054,056,065, 066,067,081,085, 123,259 Rex...,060 Ricoh Roadsta r ,09 I;259 Runco Saba...,060 Saisho ,228 Salora ,06$125 Samsung ,259 Sansui Sanyo &123,259 SBR....I00 Scaub Lorenz ,060 Schneider ,091,100,129 Scott ,140,203,229, 231 Sears ,061,065, 066,073,085,123, SI Sentra...O39 Sharp...076,08 1 Shintom...,091 Siemens ,123 Sinudyne......I00

3 Cable TV converter code table BRAND NAM COD NUMBR BRAND NAM COD NUMBR BRAND NAM COD NUMBR Sony ,052,053,054 STS....06l Sunstar Sylvania ,062,100,? 29 Symphonic Tashiko Tatung ,060,100 Teat ,060 Technics Teknika ,054,056,07 1 Telefunken ,206 Tenosal Tensai Thomson Thorn Toshiba ,062,064,085, 229,231,385 Totevision ,259 Triumph Unitech Universum ,056,068,100, 125 Vector Research Victor ,060,086 Video Concepts Videosonic Wards ,054,061,066, 067,081,09 1,168,231,259 Yamaha ,060 Yoko Zenith ,053,058 ABC ,030,032,036 Archer ,172 Century....I72 Citizen.....I7 2 Colour Voice ,050 Comtronics ,079 astern...,021 Garrard....I72 Gemini ,089 General Instrument.....,030 Hamlin ,039,278,292 Hitachi Jasco Jerrold ,030,031,033, 034,043,045 Macom Magnavox Memorex Movie Time....I75 NSC ,175 Oak ,038 Panasonic Paragon Philips ,046,047,048, 049,050,079 Pioneer Pulsar PVP Stereo Visual Matrix RCA...,040 Regal ,278,292 Regency Rembrandt Runco.....,029 Samsung ,163 Scientific Atlanta...025,027,036,29 6 Signal ,059 Signature SL Marx.....,059 Sprucer Standard Components.....I7 4 Starcom ,034 Stargate ,059 STS Tocom ,032,078 Toshiba Unika...,172 United Artists United Cable...,022 Universal... ~058,096,172,210 Viewstar ,079 Zenith....Ol9

PROGRAMMING TH RMOT CONTROL (Continued) This Remote Control is capable of learning operating codes from

You can control the functions of your TV and a variety of video/audio equipment with the supplied

TO LARN OPRATING COD OF ANOTHR RMOT CONTROL 1 Set the TV/CABL/VCR/AUX switch to AUX.

transmitter to be learned, head to head approximately 1 to 3 inches (3 to 8cm) apart.

Control for about 1 second until the LARN indicator lights up.

- LARN-US switch 5 Hold down the function button to be learned on the remote control transmitter for

Note: If the LARN indicator blinks, the supplied Remote Control cannot learn the operating code or an

4 PROGRAMMING TH RMOT CONTROL (Continued) This Remote Control is capable of learning operating codes from most infrared remote control transmitters. You can control the functions of your TV and a variety of video/audio equipment with the supplied Remote Control only. The 31 buttons a can be used as Learning buttons. TO LARN OPRATING COD OF ANOTHR RMOT CONTROL 1 Set the TV/CABL/VCR/AUX switch to AUX. 2 Set the LARN-US switch to LARN LARN(uUS 3 Place the supplied Remote Control and the remote control transmitter to be learned, head to head approximately 1 to 3 inches (3 to 8cm) apart. Supplied Remote Control Remote to be learned 4 Hold down the button to learn on the supplied Remote Control for about 1 second until the LARN indicator lights up. When you press a button other than a Learning button, the indicator will blink. - LARN-US switch 5 Hold down the function button to be learned on the remote control transmitter for about 3 seconds until the LARN indicator goes off. Note: If the LARN indicator blinks, the supplied Remote Control cannot learn the operating code or an error has occurred. Try steps 4 and 5 again. 6~epeat steps 4 and 5 for other function keys. 7 Set the LARN-US switch to US. LARNFIUS 8 To check your programming, operate the appropriate equipment with the supplied Remote Control. If the equipment does not operate as expected, repeat steps 3 to 7. If needed, try changing the distance between the two remote controls,

9 Attach the supplied template to the Remote Control to enter the function names of the AUX buttons you have programmed.

ST UP OPTION 0 0 0 0 rs pra~ c(j h(y~~d3pi ; i i I LARN m US IW TO CANCL TH LARND OPRATING CODS 1 Set the TV/CABL/VCR/AUX

LARN 1-u US 3 Hold down the button of the function to cancel on the Remote Control for about 1 second until the LARN

5 9 Attach the supplied template to the Remote Control to enter the function names of the AUX buttons you have programmed. Use a ballpoint pen etc. to write the function names. PC AUD. ST UP OPTION rs pra~ c(j h(y~~d3pi ; i i I LARN m US IW TO CANCL TH LARND OPRATING CODS 1 Set the TV/CABL/VCR/AUX switch to AUX. 2 Set the LARN-US switch to LARN. LARN 1-u US 3 Hold down the button of the function to cancel on the Remote Control for about 1 second until the LARN indicator lights up. 4 Hold d own RCALL and RST at the same time for about 6 seconds until the LARN indicator goes off after blinking. Note: You cannot cancel the programming if you release the button while the indicator is blinking. 5 Set the LARN-US switch to US. LARNUIUS

I Imwaa L&~~~ ~f cmtrok (continued)

I Imwaa L&~~~ ~f cmtrok (continued) Only the buttons used to operate the TV are described here. For details on the use of each control, refer to the pages in brackets. Aim at the remote sensor on the TV