TeckNet HDMI03-V2 Switch. User Manual

Transcription

1 TeckNet HDMI03-V2 Switch User Manual

2 InputPort3 InputPort2 Welcome Thank you for choosing this TECKNET product. To ensure optimum performance and safety, please read these instructions carefully before operating this product. It is strongly recommended you keep this manual for future reference. The TeckNet HDMI03-V2 is a high performance HDMI Switcher that equipped with a remote control. It allows a number of HDTV devices to share one HDTV display and there is no need for external power supply. Just simply press the Select button to choose your desired HDMI source for displaying on the HDTV. Product Layout DC 5.0V Input Port DC 5.0V Input Port Select Button Select Button Input3 Indicator Input3 Indicator Input2 Indicator Input2 Indicator Input1 Indicator Input1 Indicator Remote Sensor Remote Sensor Remote Control Remote Control InputPort3 InputPort2 InputPort1 InputPort1 Output Port Output Port 01

3 Package Contents 1 x HDMI03-V2 Switch 1 x Remote Control 1 x User Manual 1 x Warranty Card Product Features Support HDMI 1.3b, 12-bit Deep color High performance 2.5Gbps data rate, frequency up to 250MHz Switch easily between several HDMI sources Compatible with HDCP devices Support AWG26 HDMI standard cables, both input and output are up to 15metres Resolutions up to 1080P, computer resolutions up to 1920x1200 are easily achieved Remote control for easy and flexible operation Product Specifications Signal Input / Output Input Video Signal: volts p-p Input DDC Signal: 5volts p-p(ttl) Input Connection: HDMI x 3 Output Connection: HDMI x 1 Operating Frequency DTV/HDTV: 480i/576i/480p/720p/1080i/1080p Video Amplifier Bandwidth: 2.5Gpbs/250MHz Frequency: Up to 250MHz Resolutions (HDTV) Interlaced (50&60Hz): 480i/576i/1080i Progressive (50&60Hz): 480P/576P/1080P Mechanical Dimensions: 96 x 62 x 21.6mm Weight (Net): 143g Operation Instructions 1. Connect 3 source devices to HDMI switcher s input ports via HDMI cables. 2. Then connect HDMI switcher s output port to HD displayer via HDMI cable. 3. Connect HDMI switcher to the power supply via Micro USB charging cable (optional, this HDMI switcher can work with or without 5V DC power source connected). 02

4 Remote Control 1. Press the button 1 to switch to the input 1, L1 indicator will light up. 2. Press the button 2 to switch to the input 2, L2 indicator will light up. 3. Press the button 3 to switch to the input 3, L3 indicator will light up. Note: Input 1 is the default input when all the ports are connected to HDMI sources at the same time. When using the remote control for the first time, you need to remove the insulation sheet. If you don t use the remote for a long time, please insert the insulating sheet back. When the switcher is not supplied by power source, the signal will be delayed for 3-5 seconds. Smart Switch Press the "Select" button and you can switch between 3 HDMI input sources. 1. Once the HDMI switcher connected to input devices, it will select a power source automatically, the priority level is: Input1> input2 > Input3. 2. When turn on an input device or connect to HDMI cable, the switcher will select the source device automatically. 3. When turn off an input device or disconnect from HDMI cable, the switcher will select the next power source automatically, the priority level is: Input1> input2 > Input3. Note: DC 5V power source must be disconnected from the switcher, otherwise, the smart switch function will not work. The switcher will smart select HDMI source when the HDMI cable is connected or disconnected. IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS. 1.SAVE THESE INSTRUCTIONS - This sheet contains important safety and operating instructions. 2.Before using the product, read all instructions and caution markings on the product, accessories and device using our product. 3.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 4.Children should be supervised to ensure that they do not play with the appliance. 5.Keep the product away from fire or explosion may occur. 03

5 6.For indoor use only. Do not expose to rain, water, excess moisture or snow. 7.Do not place product in or near inflammable, explosive or hazardous object. 8.Do not place in or near water, rain, excess moisture or extreme heat. 9.Do not operate product with damaged cord or plug. 10.Do not operate product if it has been damaged in any way. 11.Do not disassemble the product. Disassembly may result in a risk of safety hazards. 12.Do not throw or shake the product 13.To reduce the risk of electric shock, unplug the product from the power supply when not in use or switch off the power supply Limited 18-Month Warranty: What this warranty covers. Shenzhen Unchain Technology Co., LTD. (Manufacturer: Unchain ) warrants to the original purchaser of this TeckNet product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Unchain warrants the TeckNet product for 18 Months. What will we do to correct problems? Unchain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the TeckNet product is not provided to Unchain for inspection upon Unchain s request at the sole expense of the purchaser, or if Unchain determines that the TeckNet product has been improperly installed, altered in any way, or tampered with. The TeckNet Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration. How to claim the warranty Please contact retailers or visit TeckNet website for more information Disclaimer Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein. Warranty We warrant that products purchased from authorized distributors will meet the applicable product specifications and be free from all defects in design, assembly, materials and workmanship. Please contact retailers, or visit our website for more information. 04

6 TeckNet P.O. BOX 122 Liverpool L9 7WQ